tcd_x12 1.6.0

data/misc/ITA.xml

@@ -0,0 +1,44 @@
+<!--
+   This file is part of the X12Parser library that provides tools to
+   manipulate X12 messages using Ruby native syntax.
+
+   http://x12parser.rubyforge.org 
+   
+   Copyright (C) 2009 APP Design, Inc.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with this library; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+   $Id: ITA.xml 78 2009-05-12 22:27:26Z ikk $
+-->
+
+<Segment name="ITA" comment="To specify allowances, charges, or services">
+  <Field name="AllowanceOrChargeIndicator" min="1" max="1" validation="T248" comment="Code which indicates an allowance or charge for the service specified"/>
+  <Field name="AgencyQualifierCode" required="y" min="2" max="2" validation="T559" comment="Code identifying the agency assigning the code values"/>
+  <Field name="SpecialServicesCode" required="y" min="2" max="10" validation="T560" comment="Code identifying the special service"/>
+  <Field name="AllowanceOrChargeMethodOfHandlingCode" min="2" max="2" validation="T331" comment="Code indicating method of handling for an allowance or charge"/>
+  <Field name="AllowanceOrChargeNumber" required="y" min="1" max="16" comment="The number assigned by a vendor referencing an allowance, promotion, deal or charge"/>
+  <Field name="AllowanceOrChargeRate" type="double" required="y" min="1" max="15" comment="Allowance or Charge Rate per Unit"/>
+  <Field name="AllowanceOrChargeTotalAmount" type="double" required="y" min="1" max="15" comment="Total dollar amount for the allowance or charge"/>
+  <Field name="AllowanceChargePercentQualifier" required="y" min="1" max="1" validation="T378" comment="Code indicating on what basis allowance or charge percent is calculated"/>
+  <Field name="Percent" type="double" required="y" min="1" max="6" comment="Percent expressed as a percent"/>
+  <Field name="Quantity1" type="double" required="y" min="1" max="15" comment="Numeric value of quantity"/>
+  <Field name="UnitOrBasisForMeasurementCode1" required="y" min="2" max="2" validation="T355" comment="Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken"/>
+  <Field name="Quantity2" type="double" required="y" min="1" max="15" comment="Numeric value of quantity"/>
+  <Field name="Description" required="y" min="1" max="80" comment="A free-form description to clarify the related data elements and their content"/>
+  <Field name="SpecialChargeOrAllowanceCode" required="y" min="3" max="3" validation="T150" comment="Code identifying type of special charge or allowance"/>
+  <Field name="SourceSubqualifier" required="y" min="1" max="15" comment="A reference that indicates the table or text maintained by the Source Qualifier"/>
+  <Field name="RelationshipCode" required="y" min="1" max="1" validation="T662" comment="Code indicating the relationship between entities"/>
+  <Field name="UnitOrBasisForMeasurementCode2" required="y" min="2" max="2" validation="T355" comment="Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken"/>
+</Segment>

data/misc/ITC.xml

@@ -0,0 +1,39 @@
+<!--
+   This file is part of the X12Parser library that provides tools to
+   manipulate X12 messages using Ruby native syntax.
+
+   http://x12parser.rubyforge.org 
+   
+   Copyright (C) 2009 APP Design, Inc.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with this library; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+   $Id: ITC.xml 78 2009-05-12 22:27:26Z ikk $
+-->
+
+<Segment name="ITC" comment="To specify the results of a general request for information">
+  <Field name="InformationRequestResultCode" min="1" max="1" validation="T1629" comment="Code identifying the type of results obtained from interview request"/>
+  <Field name="InformationType" required="y" min="2" max="2" validation="T701" comment="Code specifying the information required in the response"/>
+  <Field name="InformationStatusCode" required="y" min="1" max="1" validation="T1201" comment="A code to indicate the status of information"/>
+  <Field name="ActionCode" required="y" min="1" max="2" validation="T306" comment="Code indicating type of action"/>
+  <Field name="FinancialInformationTypeCode" required="y" min="1" max="1" validation="T703" comment="Code indicating type of financial information"/>
+  <Field name="ConsolidationCode" required="y" min="1" max="1" validation="T604" comment="Code identifying the extent of the consolidation"/>
+  <Field name="ConditionIndicator" required="y" min="2" max="3" validation="T1321" comment="Code indicating a condition"/>
+  <Field name="FinancialStatementFormatCode" required="y" min="1" max="1" validation="T1633" comment="Code identifying financial statement format"/>
+  <Field name="FreeFormMessage" required="y" min="1" max="30" comment="Free-form information"/>
+  <Field name="UnitOfTimePeriodOrInterval" required="y" min="2" max="2" validation="T344" comment="Code indicating the time period or interval"/>
+  <Field name="Description" required="y" min="1" max="80" comment="A free-form description to clarify the related data elements and their content"/>
+  <Field name="SourceOfDisclosureCode" required="y" min="1" max="1" validation="T261" comment="Code identifying the source of the disclosure information"/>
+</Segment>

data/misc/ITD.xml

@@ -0,0 +1,42 @@
+<!--
+   This file is part of the X12Parser library that provides tools to
+   manipulate X12 messages using Ruby native syntax.
+
+   http://x12parser.rubyforge.org 
+   
+   Copyright (C) 2009 APP Design, Inc.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with this library; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+   $Id: ITD.xml 78 2009-05-12 22:27:26Z ikk $
+-->
+
+<Segment name="ITD" comment="To specify terms of sale">
+  <Field name="TermsTypeCode" required="y" min="2" max="2" validation="T336" comment="Code identifying type of payment terms"/>
+  <Field name="TermsBasisDateCode" required="y" min="1" max="2" validation="T333" comment="Code identifying the beginning of the terms period"/>
+  <Field name="TermsDiscountPercent" type="double" required="y" min="1" max="6" comment="Terms discount percentage, expressed as a percent, available to the purchaser if an invoice is paid on or before the Terms Discount Due Date"/>
+  <Field name="TermsDiscountDueDate" required="y" min="8" max="8" comment="Date payment is due if discount is to be earned expressed in format CCYYMMDD where CC represents the first two digits of the calendar year"/>
+  <Field name="TermsDiscountDaysDue" type="long" required="y" min="1" max="3" comment="Number of days in the terms discount period by which payment is due if terms discount is earned"/>
+  <Field name="TermsNetDueDate" required="y" min="8" max="8" comment="Date when total invoice amount becomes due expressed in format CCYYMMDD where CC represents the first two digits of the calendar year"/>
+  <Field name="TermsNetDays" type="long" required="y" min="1" max="3" comment="Number of days until total invoice amount is due (discount not applicable)"/>
+  <Field name="TermsDiscountAmount" type="double" required="y" min="1" max="10" comment="Total amount of terms discount"/>
+  <Field name="TermsDeferredDueDate" required="y" min="8" max="8" comment="Date deferred payment or percent of invoice payable is due expressed in format CCYYMMDD where CC represents the first two digits of the calendar year"/>
+  <Field name="DeferredAmountDue" type="double" required="y" min="1" max="10" comment="Deferred amount due for payment"/>
+  <Field name="PercentOfInvoicePayable" type="double" required="y" min="1" max="5" comment="Amount of invoice payable expressed in percent"/>
+  <Field name="Description" required="y" min="1" max="80" comment="A free-form description to clarify the related data elements and their content"/>
+  <Field name="DayOfMonth" type="long" required="y" min="1" max="2" comment="The numeric value of the day of the month between 1 and the maximum day of the month being referenced"/>
+  <Field name="PaymentMethodCode" required="y" min="1" max="2" validation="T107" comment="Code identifying type of payment procedures"/>
+  <Field name="Percent" type="double" required="y" min="1" max="10" comment="Percentage expressed as a decimal"/>
+</Segment>

data/misc/IV1.xml

@@ -0,0 +1,32 @@
+<!--
+   This file is part of the X12Parser library that provides tools to
+   manipulate X12 messages using Ruby native syntax.
+
+   http://x12parser.rubyforge.org 
+   
+   Copyright (C) 2009 APP Design, Inc.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with this library; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+   $Id: IV1.xml 78 2009-05-12 22:27:26Z ikk $
+-->
+
+<Segment name="IV1" comment="To identify data applicable to the lanes covered by this proposal">
+  <Field name="VolumeUnitQualifier" required="y" min="1" max="1" validation="T184" comment="Code identifying the volume unit"/>
+  <Field name="Volume" type="double" required="y" min="1" max="8" comment="Value of volumetric measure"/>
+  <Field name="Number" type="long" required="y" min="1" max="9" comment="A generic number"/>
+  <Field name="TransportationMethodTypeCode" required="y" min="1" max="2" validation="T91" comment="Code specifying the method or type of transportation for the shipment"/>
+  <Field name="UnitOfTimePeriodOrInterval" required="y" min="2" max="2" validation="T344" comment="Code indicating the time period or interval"/>
+</Segment>

data/misc/JCT.xml

@@ -0,0 +1,36 @@
+<!--
+   This file is part of the X12Parser library that provides tools to
+   manipulate X12 messages using Ruby native syntax.
+
+   http://x12parser.rubyforge.org 
+   
+   Copyright (C) 2009 APP Design, Inc.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with this library; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+   $Id: JCT.xml 78 2009-05-12 22:27:26Z ikk $
+-->
+
+<Segment name="JCT" comment="To indicate railroad junction carriers and interchange information">
+  <Field name="StandardCarrierAlphaCode1" min="2" max="4" comment="Standard Carrier Alpha Code"/>
+  <Field name="StandardCarrierAlphaCode2" min="2" max="4" comment="Standard Carrier Alpha Code"/>
+  <Field name="FreightStationAccountingCode1" min="1" max="5" comment="Code (Freight Station Accounting) (AAR Managed Code for Locations)"/>
+  <Field name="FreightStationAccountingCode2" min="1" max="5" comment="Code (Freight Station Accounting) (AAR Managed Code for Locations)"/>
+  <Field name="StandardCarrierAlphaCode3" min="2" max="4" comment="Standard Carrier Alpha Code"/>
+  <Field name="StandardCarrierAlphaCode4" min="2" max="4" comment="Standard Carrier Alpha Code"/>
+  <Field name="YesNoConditionOrResponseCode1" min="1" max="1" validation="T1073" comment="Code indicating a Yes or No condition or response"/>
+  <Field name="InterchangeTypeCode" min="1" max="1" validation="T1560" comment="Code indicating the type of description being used in the Junction Master"/>
+  <Field name="YesNoConditionOrResponseCode2" min="1" max="1" validation="T1073" comment="Code indicating a Yes or No condition or response"/>
+</Segment>

data/misc/JID.xml

@@ -0,0 +1,33 @@
+<!--
+   This file is part of the X12Parser library that provides tools to
+   manipulate X12 messages using Ruby native syntax.
+
+   http://x12parser.rubyforge.org 
+   
+   Copyright (C) 2009 APP Design, Inc.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with this library; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+   $Id: JID.xml 78 2009-05-12 22:27:26Z ikk $
+-->
+
+<Segment name="JID" comment="To specify equipment charged within a particular service code">
+  <Field name="ProductServiceIdQualifier" min="2" max="2" validation="T235" comment="Code identifying the type/source of the descriptive number used in Product/Service ID (234)"/>
+  <Field name="ProductServiceId" min="1" max="48" comment="Identifying number for a product or service"/>
+  <Field name="Quantity" type="double" required="y" min="1" max="15" comment="Numeric value of quantity"/>
+  <Field name="CompositeUnitOfMeasure" type="C001" required="y" min="0" max="inf" comment="To identify a composite unit of measure (See Figures Appendix for examples of use)"/>
+  <Field name="ProductServiceConditionCode" required="y" min="2" max="2" validation="T286" comment="Code identifying condition of product/service"/>
+  <Field name="MonetaryAmount" type="double" required="y" min="1" max="18" comment="Monetary amount"/>
+</Segment>

data/misc/JIL.xml

@@ -0,0 +1,34 @@
+<!--
+   This file is part of the X12Parser library that provides tools to
+   manipulate X12 messages using Ruby native syntax.
+
+   http://x12parser.rubyforge.org 
+   
+   Copyright (C) 2009 APP Design, Inc.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with this library; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+   $Id: JIL.xml 78 2009-05-12 22:27:26Z ikk $
+-->
+
+<Segment name="JIL" comment="To specify the service code or classification the expense will be charged to and provide the required expense data">
+  <Field name="ProductServiceIdQualifier" min="2" max="2" validation="T235" comment="Code identifying the type/source of the descriptive number used in Product/Service ID (234)"/>
+  <Field name="ProductServiceId" min="1" max="48" comment="Identifying number for a product or service"/>
+  <Field name="MonetaryAmount" type="double" required="y" min="1" max="18" comment="Monetary amount"/>
+  <Field name="ReferenceIdentificationQualifier" required="y" min="2" max="3" validation="T128" comment="Code qualifying the Reference Identification"/>
+  <Field name="ReferenceIdentification" required="y" min="1" max="50" comment="Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier"/>
+  <Field name="Date" required="y" min="8" max="8" comment="Date expressed as CCYYMMDD where CC represents the first two digits of the calendar year"/>
+  <Field name="AmountQualifierCode" required="y" min="1" max="3" validation="T522" comment="Code to qualify amount"/>
+</Segment>

data/misc/JIT.xml

@@ -0,0 +1,29 @@
+<!--
+   This file is part of the X12Parser library that provides tools to
+   manipulate X12 messages using Ruby native syntax.
+
+   http://x12parser.rubyforge.org 
+   
+   Copyright (C) 2009 APP Design, Inc.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with this library; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+   $Id: JIT.xml 78 2009-05-12 22:27:26Z ikk $
+-->
+
+<Segment name="JIT" comment="To identify the specific shipping/delivery time in terms of a 24-hour clock and identify the associated quantity">
+  <Field name="Quantity" type="double" min="1" max="15" comment="Numeric value of quantity"/>
+  <Field name="Time" min="4" max="8" comment="Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)"/>
+</Segment>

data/misc/JL.xml

@@ -0,0 +1,31 @@
+<!--
+   This file is part of the X12Parser library that provides tools to
+   manipulate X12 messages using Ruby native syntax.
+
+   http://x12parser.rubyforge.org 
+   
+   Copyright (C) 2009 APP Design, Inc.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with this library; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+   $Id: JL.xml 78 2009-05-12 22:27:26Z ikk $
+-->
+
+<Segment name="JL" comment="To indicate the carrier, date, time, and individual making a journal entry">
+  <Field name="StandardCarrierAlphaCode" min="2" max="4" comment="Standard Carrier Alpha Code"/>
+  <Field name="Date" min="8" max="8" comment="Date expressed as CCYYMMDD where CC represents the first two digits of the calendar year"/>
+  <Field name="Time" min="4" max="8" comment="Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)"/>
+  <Field name="Name" required="y" min="1" max="60" comment="Free-form name"/>
+</Segment>

data/misc/JS.xml

@@ -0,0 +1,31 @@
+<!--
+   This file is part of the X12Parser library that provides tools to
+   manipulate X12 messages using Ruby native syntax.
+
+   http://x12parser.rubyforge.org 
+   
+   Copyright (C) 2009 APP Design, Inc.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with this library; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+   $Id: JS.xml 78 2009-05-12 22:27:26Z ikk $
+-->
+
+<Segment name="JS" comment="To define the interchange carriers and their roles">
+  <Field name="StandardCarrierAlphaCode1" min="2" max="4" comment="Standard Carrier Alpha Code"/>
+  <Field name="RailJunctionSettlementRoleCode1" min="1" max="1" validation="T1561" comment="Code indicating carrier's junction settlement role"/>
+  <Field name="StandardCarrierAlphaCode2" min="2" max="4" comment="Standard Carrier Alpha Code"/>
+  <Field name="RailJunctionSettlementRoleCode2" min="1" max="1" validation="T1561" comment="Code indicating carrier's junction settlement role"/>
+</Segment>

data/misc/K1.xml

@@ -0,0 +1,29 @@
+<!--
+   This file is part of the X12Parser library that provides tools to
+   manipulate X12 messages using Ruby native syntax.
+
+   http://x12parser.rubyforge.org 
+   
+   Copyright (C) 2009 APP Design, Inc.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with this library; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+   $Id: K1.xml 78 2009-05-12 22:27:26Z ikk $
+-->
+
+<Segment name="K1" comment="To transmit information in a free-form format for comment or special instruction">
+  <Field name="FreeFormMessage1" min="1" max="30" comment="Free-form information"/>
+  <Field name="FreeFormMessage2" required="y" min="1" max="30" comment="Free-form information"/>
+</Segment>

data/misc/K2.xml

@@ -0,0 +1,28 @@
+<!--
+   This file is part of the X12Parser library that provides tools to
+   manipulate X12 messages using Ruby native syntax.
+
+   http://x12parser.rubyforge.org 
+   
+   Copyright (C) 2009 APP Design, Inc.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with this library; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+   $Id: K2.xml 78 2009-05-12 22:27:26Z ikk $
+-->
+
+<Segment name="K2" comment="To transmit information in a free-form format for comment or special instruction">
+  <Field name="Description" min="1" max="80" comment="A free-form description to clarify the related data elements and their content"/>
+</Segment>

data/misc/K3.xml

@@ -0,0 +1,30 @@
+<!--
+   This file is part of the X12Parser library that provides tools to
+   manipulate X12 messages using Ruby native syntax.
+
+   http://x12parser.rubyforge.org 
+   
+   Copyright (C) 2009 APP Design, Inc.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with this library; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+   $Id: K3.xml 78 2009-05-12 22:27:26Z ikk $
+-->
+
+<Segment name="K3" comment="To transmit a fixed-format record or matrix contents">
+  <Field name="FixedFormatInformation" min="1" max="80" comment="Data in fixed format agreed upon by sender and receiver"/>
+  <Field name="RecordFormatCode" required="y" min="1" max="2" validation="T1333" comment="Code specifying the format of information"/>
+  <Field name="CompositeUnitOfMeasure" type="C001" required="y" min="0" max="inf" comment="To identify a composite unit of measure (See Figures Appendix for examples of use)"/>
+</Segment>

data/misc/L0.xml

@@ -0,0 +1,42 @@
+<!--
+   This file is part of the X12Parser library that provides tools to
+   manipulate X12 messages using Ruby native syntax.
+
+   http://x12parser.rubyforge.org 
+   
+   Copyright (C) 2009 APP Design, Inc.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with this library; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+   $Id: L0.xml 78 2009-05-12 22:27:26Z ikk $
+-->
+
+<Segment name="L0" comment="To specify quantity, weight, volume, and type of service for a line item including applicable &quot;quantity/rate-as&quot; data">
+  <Field name="LadingLineItemNumber" type="long" required="y" min="1" max="3" comment="Sequential line number for a lading item"/>
+  <Field name="BilledRatedAsQuantity" type="double" required="y" min="1" max="11" comment="Basis for rating (miles, value, volume, etc.); Note: Weight may be defined by either data element 220 or 81"/>
+  <Field name="BilledRatedAsQualifier" required="y" min="2" max="2" validation="T221" comment="Code identifying the type of quantity or value on which the rate or item pricing is based"/>
+  <Field name="Weight" type="double" required="y" min="1" max="10" comment="Numeric value of weight"/>
+  <Field name="WeightQualifier" required="y" min="1" max="2" validation="T187" comment="Code defining the type of weight"/>
+  <Field name="Volume" type="double" required="y" min="1" max="8" comment="Value of volumetric measure"/>
+  <Field name="VolumeUnitQualifier" required="y" min="1" max="1" validation="T184" comment="Code identifying the volume unit"/>
+  <Field name="LadingQuantity" type="long" required="y" min="1" max="7" comment="Number of units (pieces) of the lading commodity"/>
+  <Field name="PackagingFormCode1" required="y" min="3" max="3" validation="T211" comment="Code for packaging form of the lading quantity"/>
+  <Field name="DunnageDescription" required="y" min="2" max="25" comment="Material used to protect lading"/>
+  <Field name="WeightUnitCode" required="y" min="1" max="1" validation="T188" comment="Code specifying the weight unit"/>
+  <Field name="TypeOfServiceCode" required="y" min="2" max="2" validation="T56" comment="Code specifying extent of transportation service requested"/>
+  <Field name="Quantity" type="double" required="y" min="1" max="15" comment="Numeric value of quantity"/>
+  <Field name="PackagingFormCode2" required="y" min="3" max="3" validation="T211" comment="Code for packaging form of the lading quantity"/>
+  <Field name="YesNoConditionOrResponseCode" required="y" min="1" max="1" validation="T1073" comment="Code indicating a Yes or No condition or response"/>
+</Segment>

data/misc/L1.xml

@@ -0,0 +1,49 @@
+<!--
+   This file is part of the X12Parser library that provides tools to
+   manipulate X12 messages using Ruby native syntax.
+
+   http://x12parser.rubyforge.org 
+   
+   Copyright (C) 2009 APP Design, Inc.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with this library; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+   $Id: L1.xml 78 2009-05-12 22:27:26Z ikk $
+-->
+
+<Segment name="L1" comment="To specify rate and charges detail relative to a line item including freight charges, advances, special charges, and entitlements">
+  <Field name="LadingLineItemNumber" type="long" required="y" min="1" max="3" comment="Sequential line number for a lading item"/>
+  <Field name="FreightRate" type="double" required="y" min="1" max="9" comment="Rate that applies to the specific commodity"/>
+  <Field name="RateValueQualifier1" required="y" min="2" max="2" validation="T122" comment="Code qualifying how to extend charges or interpret value"/>
+  <Field name="Charge" type="double" required="y" min="1" max="12" comment="For a line item: freight or special charge; for the total invoice: the total charges -- expressed in the standard monetary denomination for the currency specified"/>
+  <Field name="Advances" type="double" required="y" min="1" max="9" comment="Incidental charges occurring during transportation which are not generally considered to be freight charges (examples - stop charges, diversion and reconsignment, icing) expressed in the standard monetary denomination for the currency specified"/>
+  <Field name="PrepaidAmount" type="double" required="y" min="1" max="9" comment="Money paid at point of origin (usually by shipper) expressed in the standard monetary denomination for the currency specified"/>
+  <Field name="RateCombinationPointCode" required="y" min="3" max="9" validation="T120" comment="The code denoting the connecting station for a joint rate obtained by combining two or more published rates which are used for the calculation of transportation charges"/>
+  <Field name="SpecialChargeOrAllowanceCode" required="y" min="3" max="3" validation="T150" comment="Code identifying type of special charge or allowance"/>
+  <Field name="RateClassCode" required="y" min="1" max="3" validation="T121" comment="Code identifying specifically designated class of goods; Note: For international air shipments, see IATA Resolution 600k"/>
+  <Field name="EntitlementCode" required="y" min="1" max="1" validation="T39" comment="Code identifying entitlement party"/>
+  <Field name="ChargeMethodOfPayment" required="y" min="1" max="1" validation="T16" comment="Code defining method of payment"/>
+  <Field name="SpecialChargeDescription" required="y" min="2" max="25" comment="Identification of special charge; this data element is used whenever an applicable code cannot be found in data element 150"/>
+  <Field name="TariffApplicationCode" required="y" min="1" max="1" validation="T257" comment="Code indicating to which traffic a tariff applies"/>
+  <Field name="DeclaredValue" type="double" required="y" min="2" max="12" comment="Monetary assigned value expressed in the standard monetary denomination for the currency specified"/>
+  <Field name="RateValueQualifier2" required="y" min="2" max="2" validation="T122" comment="Code qualifying how to extend charges or interpret value"/>
+  <Field name="LadingLiabilityCode" required="y" min="1" max="1" validation="T372" comment="Code identifying limits of liability"/>
+  <Field name="BilledRatedAsQuantity" type="double" required="y" min="1" max="11" comment="Basis for rating (miles, value, volume, etc.); Note: Weight may be defined by either data element 220 or 81"/>
+  <Field name="BilledRatedAsQualifier" required="y" min="2" max="2" validation="T221" comment="Code identifying the type of quantity or value on which the rate or item pricing is based"/>
+  <Field name="Percent" type="double" required="y" min="1" max="10" comment="Percentage expressed as a decimal"/>
+  <Field name="CurrencyCode" required="y" min="3" max="3" comment="Code (Standard ISO) for country in whose currency the charges are specified"/>
+  <Field name="Amount" type="double" required="y" min="1" max="15" comment="Monetary amount"/>
+  <Field name="LadingValue" type="double" required="y" min="2" max="9" comment="Value of shipment for export, expressed in the standard monetary denomination for the currency specified"/>
+</Segment>

data/misc/L10.xml

@@ -0,0 +1,30 @@
+<!--
+   This file is part of the X12Parser library that provides tools to
+   manipulate X12 messages using Ruby native syntax.
+
+   http://x12parser.rubyforge.org 
+   
+   Copyright (C) 2009 APP Design, Inc.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with this library; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+   $Id: L10.xml 78 2009-05-12 22:27:26Z ikk $
+-->
+
+<Segment name="L10" comment="To transmit weight information">
+  <Field name="Weight" type="double" min="1" max="10" comment="Numeric value of weight"/>
+  <Field name="WeightQualifier" min="1" max="2" validation="T187" comment="Code defining the type of weight"/>
+  <Field name="WeightUnitCode" required="y" min="1" max="1" validation="T188" comment="Code specifying the weight unit"/>
+</Segment>

data/misc/L11.xml

@@ -0,0 +1,32 @@
+<!--
+   This file is part of the X12Parser library that provides tools to
+   manipulate X12 messages using Ruby native syntax.
+
+   http://x12parser.rubyforge.org 
+   
+   Copyright (C) 2009 APP Design, Inc.
+
+   This library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   This library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with this library; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+   $Id: L11.xml 78 2009-05-12 22:27:26Z ikk $
+-->
+
+<Segment name="L11" comment="To specify instructions in this business relationship or a reference number">
+  <Field name="ReferenceIdentification" required="y" min="1" max="50" comment="Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier"/>
+  <Field name="ReferenceIdentificationQualifier" required="y" min="2" max="3" validation="T128" comment="Code qualifying the Reference Identification"/>
+  <Field name="Description" required="y" min="1" max="80" comment="A free-form description to clarify the related data elements and their content"/>
+  <Field name="Date" required="y" min="8" max="8" comment="Date expressed as CCYYMMDD where CC represents the first two digits of the calendar year"/>
+  <Field name="YesNoConditionOrResponseCode" required="y" min="1" max="1" validation="T1073" comment="Code indicating a Yes or No condition or response"/>
+</Segment>