taps 0.3.19 → 0.3.20.pre1

data/lib/taps/vendor/json_pure-1.5.1/README

@@ -1,356 +0,0 @@
-== Description
-
-This is a implementation of the JSON specification according to RFC 4627
-http://www.ietf.org/rfc/rfc4627.txt . Starting from version 1.0.0 on there
-will be two variants available:
-
-* A pure ruby variant, that relies on the iconv and the stringscan
-  extensions, which are both part of the ruby standard library.
-* The quite a bit faster C extension variant, which is in parts implemented
-  in C and comes with its own unicode conversion functions and a parser
-  generated by the ragel state machine compiler
-  http://www.cs.queensu.ca/~thurston/ragel .
-
-Both variants of the JSON generator generate UTF-8 character sequences by
-default. If an :ascii_only option with a true value is given, they escape all
-non-ASCII and control characters with \uXXXX escape sequences, and support
-UTF-16 surrogate pairs in order to be able to generate the whole range of
-unicode code points.
-
-All strings, that are to be encoded as JSON strings, should be UTF-8 byte
-sequences on the Ruby side. To encode raw binary strings, that aren't UTF-8
-encoded, please use the to_json_raw_object method of String (which produces
-an object, that contains a byte array) and decode the result on the receiving
-endpoint.
-
-The JSON parsers can parse UTF-8, UTF-16BE, UTF-16LE, UTF-32BE, and UTF-32LE
-JSON documents under Ruby 1.8. Under Ruby 1.9 they take advantage of Ruby's
-M17n features and can parse all documents which have the correct
-String#encoding set. If a document string has ASCII-8BIT as an encoding the
-parser attempts to figure out which of the UTF encodings from above it is and
-trys to parse it.
-
-== Installation
-
-It's recommended to use the extension variant of JSON, because it's faster than
-the pure ruby variant. If you cannot build it on your system, you can settle
-for the latter.
-
-Just type into the command line as root:
-
-  # rake install
-
-The above command will build the extensions and install them on your system.
-
-  # rake install_pure
-
-or
-
-  # ruby install.rb
-
-will just install the pure ruby implementation of JSON.
-
-If you use Rubygems you can type
-
-  # gem install json
-
-instead, to install the newest JSON version.
-
-There is also a pure ruby json only variant of the gem, that can be installed
-with:
-
-  # gem install json_pure
-
-== Compiling the extensions yourself
-
-If you want to build the extensions yourself you need rake:
-
-  You can get it from rubyforge:
-    http://rubyforge.org/projects/rake
-
-  or just type
-
-  # gem install rake
-
-  for the installation via rubygems.
-
-If you want to create the parser.c file from its parser.rl file or draw nice
-graphviz images of the state machines, you need ragel from: http://www.cs.queensu.ca/~thurston/ragel
-
-
-== Usage
-
-To use JSON you can
-  require 'json'
-to load the installed variant (either the extension 'json' or the pure
-variant 'json_pure'). If you have installed the extension variant, you can
-pick either the extension variant or the pure variant by typing
-  require 'json/ext'
-or
-  require 'json/pure'
-
-Now you can parse a JSON document into a ruby data structure by calling
-
-  JSON.parse(document)
-
-If you want to generate a JSON document from a ruby data structure call
-  JSON.generate(data)
-
-You can also use the pretty_generate method (which formats the output more
-verbosely and nicely) or fast_generate (which doesn't do any of the security
-checks generate performs, e. g. nesting deepness checks).
-
-To create a valid JSON document you have to make sure, that the output is
-embedded in either a JSON array [] or a JSON object {}. The easiest way to do
-this, is by putting your values in a Ruby Array or Hash instance.
-
-There are also the JSON and JSON[] methods which use parse on a String or
-generate a JSON document from an array or hash:
-
-  document = JSON 'test'  => 23 # => "{\"test\":23}"
-  document = JSON['test'] => 23 # => "{\"test\":23}"
-
-and
-
-  data = JSON '{"test":23}'  # => {"test"=>23}
-  data = JSON['{"test":23}'] # => {"test"=>23}
-
-You can choose to load a set of common additions to ruby core's objects if
-you
-  require 'json/add/core'
-
-After requiring this you can, e. g., serialise/deserialise Ruby ranges:
-
-  JSON JSON(1..10) # => 1..10
-
-To find out how to add JSON support to other or your own classes, read the
-section "More Examples" below.
-
-To get the best compatibility to rails' JSON implementation, you can
-  require 'json/add/rails'
-
-Both of the additions attempt to require 'json' (like above) first, if it has
-not been required yet.
-
-== More Examples
-
-To create a JSON document from a ruby data structure, you can call
-JSON.generate like that:
-
- json = JSON.generate [1, 2, {"a"=>3.141}, false, true, nil, 4..10]
- # => "[1,2,{\"a\":3.141},false,true,null,\"4..10\"]"
-
-To get back a ruby data structure from a JSON document, you have to call
-JSON.parse on it:
-
- JSON.parse json
- # => [1, 2, {"a"=>3.141}, false, true, nil, "4..10"]
-
-Note, that the range from the original data structure is a simple
-string now. The reason for this is, that JSON doesn't support ranges
-or arbitrary classes. In this case the json library falls back to call
-Object#to_json, which is the same as #to_s.to_json.
-
-It's possible to add JSON support serialization to arbitrary classes by
-simply implementing a more specialized version of the #to_json method, that
-should return a JSON object (a hash converted to JSON with #to_json) like
-this (don't forget the *a for all the arguments):
-
- class Range
-   def to_json(*a)
-     {
-       'json_class'   => self.class.name, # = 'Range'
-       'data'         => [ first, last, exclude_end? ]
-     }.to_json(*a)
-   end
- end
-
-The hash key 'json_class' is the class, that will be asked to deserialise the
-JSON representation later. In this case it's 'Range', but any namespace of
-the form 'A::B' or '::A::B' will do. All other keys are arbitrary and can be
-used to store the necessary data to configure the object to be deserialised.
-
-If a the key 'json_class' is found in a JSON object, the JSON parser checks
-if the given class responds to the json_create class method. If so, it is
-called with the JSON object converted to a Ruby hash. So a range can
-be deserialised by implementing Range.json_create like this:
-
- class Range
-   def self.json_create(o)
-     new(*o['data'])
-   end
- end
-
-Now it possible to serialise/deserialise ranges as well:
-
- json = JSON.generate [1, 2, {"a"=>3.141}, false, true, nil, 4..10]
- # => "[1,2,{\"a\":3.141},false,true,null,{\"json_class\":\"Range\",\"data\":[4,10,false]}]"
- JSON.parse json
- # => [1, 2, {"a"=>3.141}, false, true, nil, 4..10]
-
-JSON.generate always creates the shortest possible string representation of a
-ruby data structure in one line. This is good for data storage or network
-protocols, but not so good for humans to read. Fortunately there's also
-JSON.pretty_generate (or JSON.pretty_generate) that creates a more readable
-output:
-
- puts JSON.pretty_generate([1, 2, {"a"=>3.141}, false, true, nil, 4..10])
- [
-   1,
-   2,
-   {
-     "a": 3.141
-   },
-   false,
-   true,
-   null,
-   {
-     "json_class": "Range",
-     "data": [
-       4,
-       10,
-       false
-     ]
-   }
- ]
-
-There are also the methods Kernel#j for generate, and Kernel#jj for
-pretty_generate output to the console, that work analogous to Core Ruby's p and
-the pp library's pp methods.
-
-The script tools/server.rb contains a small example if you want to test, how
-receiving a JSON object from a webrick server in your browser with the
-javasript prototype library http://www.prototypejs.org works.
-
-== Speed Comparisons
-
-I have created some benchmark results (see the benchmarks/data-p4-3Ghz
-subdir of the package) for the JSON-parser to estimate the speed up in the C
-extension:
-
- Comparing times (call_time_mean):
-  1 ParserBenchmarkExt#parser   900 repeats:
-        553.922304770 (  real) ->   21.500x 
-          0.001805307
-  2 ParserBenchmarkYAML#parser  1000 repeats:
-        224.513358139 (  real) ->    8.714x 
-          0.004454078
-  3 ParserBenchmarkPure#parser  1000 repeats:
-         26.755020642 (  real) ->    1.038x 
-          0.037376163
-  4 ParserBenchmarkRails#parser 1000 repeats:
-         25.763381731 (  real) ->    1.000x 
-          0.038814780
-            calls/sec (  time) ->    speed  covers
-            secs/call
-
-In the table above 1 is JSON::Ext::Parser, 2 is YAML.load with YAML
-compatbile JSON document, 3 is is JSON::Pure::Parser, and 4 is
-ActiveSupport::JSON.decode. The ActiveSupport JSON-decoder converts the
-input first to YAML and then uses the YAML-parser, the conversion seems to
-slow it down so much that it is only as fast as the JSON::Pure::Parser!
-
-If you look at the benchmark data you can see that this is mostly caused by
-the frequent high outliers - the median of the Rails-parser runs is still
-overall smaller than the median of the JSON::Pure::Parser runs:
-
- Comparing times (call_time_median):
-  1 ParserBenchmarkExt#parser   900 repeats:
-        800.592479481 (  real) ->   26.936x 
-          0.001249075
-  2 ParserBenchmarkYAML#parser  1000 repeats:
-        271.002390644 (  real) ->    9.118x 
-          0.003690004
-  3 ParserBenchmarkRails#parser 1000 repeats:
-         30.227910865 (  real) ->    1.017x 
-          0.033082008
-  4 ParserBenchmarkPure#parser  1000 repeats:
-         29.722384421 (  real) ->    1.000x 
-          0.033644676
-            calls/sec (  time) ->    speed  covers
-            secs/call
-
-I have benchmarked the JSON-Generator as well. This generated a few more
-values, because there are different modes that also influence the achieved
-speed:
-
- Comparing times (call_time_mean):
-  1 GeneratorBenchmarkExt#generator_fast    1000 repeats:
-        547.354332608 (  real) ->   15.090x 
-          0.001826970
-  2 GeneratorBenchmarkExt#generator_safe    1000 repeats:
-        443.968212317 (  real) ->   12.240x 
-          0.002252414
-  3 GeneratorBenchmarkExt#generator_pretty  900 repeats:
-        375.104545883 (  real) ->   10.341x 
-          0.002665923
-  4 GeneratorBenchmarkPure#generator_fast   1000 repeats:
-         49.978706968 (  real) ->    1.378x 
-          0.020008521
-  5 GeneratorBenchmarkRails#generator       1000 repeats:
-         38.531868759 (  real) ->    1.062x 
-          0.025952543
-  6 GeneratorBenchmarkPure#generator_safe   1000 repeats:
-         36.927649925 (  real) ->    1.018x 7 (>=3859)
-          0.027079979
-  7 GeneratorBenchmarkPure#generator_pretty 1000 repeats:
-         36.272134441 (  real) ->    1.000x 6 (>=3859)
-          0.027569373
-            calls/sec (  time) ->    speed  covers
-            secs/call
-
-In the table above 1-3 are JSON::Ext::Generator methods. 4, 6, and 7 are
-JSON::Pure::Generator methods and 5 is the Rails JSON generator. It is now a
-bit faster than the generator_safe and generator_pretty methods of the pure
-variant but slower than the others.
-
-To achieve the fastest JSON document output, you can use the fast_generate
-method. Beware, that this will disable the checking for circular Ruby data
-structures, which may cause JSON to go into an infinite loop.
-
-Here are the median comparisons for completeness' sake:
-
- Comparing times (call_time_median):
-  1 GeneratorBenchmarkExt#generator_fast    1000 repeats:
-        708.258020939 (  real) ->   16.547x 
-          0.001411915
-  2 GeneratorBenchmarkExt#generator_safe    1000 repeats:
-        569.105020353 (  real) ->   13.296x 
-          0.001757145
-  3 GeneratorBenchmarkExt#generator_pretty  900 repeats:
-        482.825371244 (  real) ->   11.280x 
-          0.002071142
-  4 GeneratorBenchmarkPure#generator_fast   1000 repeats:
-         62.717626652 (  real) ->    1.465x 
-          0.015944481
-  5 GeneratorBenchmarkRails#generator       1000 repeats:
-         43.965681162 (  real) ->    1.027x 
-          0.022745013
-  6 GeneratorBenchmarkPure#generator_safe   1000 repeats:
-         43.929073409 (  real) ->    1.026x 7 (>=3859)
-          0.022763968
-  7 GeneratorBenchmarkPure#generator_pretty 1000 repeats:
-         42.802514491 (  real) ->    1.000x 6 (>=3859)
-          0.023363113
-            calls/sec (  time) ->    speed  covers
-            secs/call
-
-== Author
-
-Florian Frank <mailto:flori@ping.de>
-
-== License
-
-Ruby License, see the COPYING file included in the source distribution. The
-Ruby License includes the GNU General Public License (GPL), Version 2, so see
-the file GPL as well.
-
-== Download
-
-The latest version of this library can be downloaded at
-
-* http://rubyforge.org/frs?group_id=953
-
-Online Documentation should be located at
-
-* http://json.rubyforge.org

data/lib/taps/vendor/json_pure-1.5.1/README-json-jruby.markdown

@@ -1,33 +0,0 @@
-JSON-JRuby
-==========
-
-JSON-JRuby is a port of Florian Frank's native
-[`json` library](http://json.rubyforge.org/) to JRuby.
-It aims to be a perfect drop-in replacement for `json_pure`.
-
-
-Development version
-===================
-
-The latest version is available from the
-[Git repository](http://github.com/mernen/json-jruby/tree):
-
-    git clone git://github.com/mernen/json-jruby.git
-
-
-Compiling
-=========
-
-You'll need JRuby version 1.2 or greater to build JSON-JRuby.
-Its path must be set on the `jruby.dir` property of
-`nbproject/project.properties` (defaults to `../jruby`).
-
-Additionally, you'll need [Ant](http://ant.apache.org/), and
-[Ragel](http://www.cs.queensu.ca/~thurston/ragel/) 6.4 or greater.
-
-Then, from the folder where the sources are located, type:
-
-    ant clean jar
-
-to clean any leftovers from previous builds and generate the `.jar` files.
-To generate a RubyGem, specify the `gem` action rather than `jar`.

data/lib/taps/vendor/json_pure-1.5.1/Rakefile

@@ -1,401 +0,0 @@
-begin
-  require 'rake/gempackagetask'
-rescue LoadError
-end
-
-begin
-  require 'rake/extensiontask'
-rescue LoadError
-  warn "WARNING: rake-compiler is not installed. You will not be able to build the json gem until you install it."
-end
-
-require 'rbconfig'
-include Config
-
-require 'rake/clean'
-CLOBBER.include Dir['benchmarks/data/*.{dat,log}']
-CLEAN.include FileList['diagrams/*.*'], 'doc', 'coverage', 'tmp',
-  FileList["ext/**/{Makefile,mkmf.log}"], 'build', 'dist', FileList['**/*.rbc'],
-  FileList["{ext,lib}/**/*.{so,bundle,#{CONFIG['DLEXT']},o,obj,pdb,lib,manifest,exp,def,jar,class}"],
-  FileList['java/src/**/*.class']
-
-MAKE = ENV['MAKE'] || %w[gmake make].find { |c| system(c, '-v') }
-PKG_NAME          = 'json'
-PKG_TITLE         = 'JSON Implementation for Ruby'
-PKG_VERSION       = File.read('VERSION').chomp
-PKG_FILES         = FileList["**/*"].exclude(/CVS|pkg|tmp|coverage|Makefile|\.nfs\.|\.iml\Z/).exclude(/\.(so|bundle|o|class|#{CONFIG['DLEXT']})$/)
-
-EXT_ROOT_DIR      = 'ext/json/ext'
-EXT_PARSER_DIR    = "#{EXT_ROOT_DIR}/parser"
-EXT_PARSER_DL     = "#{EXT_PARSER_DIR}/parser.#{CONFIG['DLEXT']}"
-RAGEL_PATH        = "#{EXT_PARSER_DIR}/parser.rl"
-EXT_PARSER_SRC    = "#{EXT_PARSER_DIR}/parser.c"
-PKG_FILES << EXT_PARSER_SRC
-EXT_GENERATOR_DIR = "#{EXT_ROOT_DIR}/generator"
-EXT_GENERATOR_DL  = "#{EXT_GENERATOR_DIR}/generator.#{CONFIG['DLEXT']}"
-EXT_GENERATOR_SRC = "#{EXT_GENERATOR_DIR}/generator.c"
-
-JAVA_DIR            = "java/src/json/ext"
-JAVA_RAGEL_PATH     = "#{JAVA_DIR}/Parser.rl"
-JAVA_PARSER_SRC     = "#{JAVA_DIR}/Parser.java"
-JAVA_SOURCES        = FileList["#{JAVA_DIR}/*.java"]
-JAVA_CLASSES        = []
-JRUBY_PARSER_JAR    = File.expand_path("lib/json/ext/parser.jar")
-JRUBY_GENERATOR_JAR = File.expand_path("lib/json/ext/generator.jar")
-
-RAGEL_CODEGEN     = %w[rlcodegen rlgen-cd ragel].find { |c| system(c, '-v') }
-RAGEL_DOTGEN      = %w[rlgen-dot rlgen-cd ragel].find { |c| system(c, '-v') }
-
-def myruby(*args, &block)
-  @myruby ||= File.join(CONFIG['bindir'], CONFIG['ruby_install_name'])
-  options = (Hash === args.last) ? args.pop : {}
-  if args.length > 1 then
-    sh(*([@myruby] + args + [options]), &block)
-  else
-    sh("#{@myruby} #{args.first}", options, &block)
-  end
-end
-
-desc "Installing library (pure)"
-task :install_pure => :version do
-  myruby 'install.rb'
-end
-
-task :install_ext_really do
-  sitearchdir = CONFIG["sitearchdir"]
-  cd 'ext' do
-    for file in Dir["json/ext/*.#{CONFIG['DLEXT']}"]
-      d = File.join(sitearchdir, file)
-      mkdir_p File.dirname(d)
-      install(file, d)
-    end
-  end
-end
-
-desc "Installing library (extension)"
-task :install_ext => [ :compile_ext, :install_pure, :install_ext_really ]
-
-desc "Installing library (extension)"
-if RUBY_PLATFORM =~ /java/
-  task :install => :install_pure
-else
-  task :install => :install_ext
-end
-
-if defined?(Gem) and defined?(Rake::GemPackageTask)
-  spec_pure = Gem::Specification.new do |s|
-    s.name = 'json_pure'
-    s.version = PKG_VERSION
-    s.summary = PKG_TITLE
-    s.description = "This is a JSON implementation in pure Ruby."
-
-    s.files = PKG_FILES
-
-    s.require_path = 'lib'
-
-    s.bindir = "bin"
-    s.executables = [ "edit_json.rb", "prettify_json.rb" ]
-    s.default_executable = "edit_json.rb"
-
-    s.has_rdoc = true
-    s.extra_rdoc_files << 'README'
-    s.rdoc_options <<
-      '--title' <<  'JSON implemention for ruby' << '--main' << 'README'
-    s.test_files.concat Dir['./tests/test_*.rb']
-
-    s.author = "Florian Frank"
-    s.email = "flori@ping.de"
-    s.homepage = "http://flori.github.com/#{PKG_NAME}"
-    s.rubyforge_project = "json"
-  end
-
-  Rake::GemPackageTask.new(spec_pure) do |pkg|
-      pkg.need_tar = true
-      pkg.package_files = PKG_FILES
-  end
-end
-
-if defined?(Gem) and defined?(Rake::GemPackageTask) and defined?(Rake::ExtensionTask)
-  spec_ext = Gem::Specification.new do |s|
-    s.name = 'json'
-    s.version = PKG_VERSION
-    s.summary = PKG_TITLE
-    s.description = "This is a JSON implementation as a Ruby extension in C."
-
-    s.files = PKG_FILES
-
-    s.extensions = FileList['ext/**/extconf.rb']
-
-    s.require_path = EXT_ROOT_DIR
-    s.require_paths << 'ext'
-    s.require_paths << 'lib'
-
-    s.bindir = "bin"
-    s.executables = [ "edit_json.rb", "prettify_json.rb" ]
-    s.default_executable = "edit_json.rb"
-
-    s.has_rdoc = true
-    s.extra_rdoc_files << 'README'
-    s.rdoc_options <<
-      '--title' <<  'JSON implemention for Ruby' << '--main' << 'README'
-    s.test_files.concat Dir['./tests/test_*.rb']
-
-    s.author = "Florian Frank"
-    s.email = "flori@ping.de"
-    s.homepage = "http://flori.github.com/#{PKG_NAME}"
-    s.rubyforge_project = "json"
-  end
-
-  Rake::GemPackageTask.new(spec_ext) do |pkg|
-    pkg.need_tar      = true
-    pkg.package_files = PKG_FILES
-  end
-
-  Rake::ExtensionTask.new do |ext|
-    ext.name            = 'parser'
-    ext.gem_spec        = spec_ext
-    ext.cross_compile   = true
-    ext.cross_platform  = %w[i386-mswin32 i386-mingw32]
-    ext.ext_dir         = 'ext/json/ext/parser'
-    ext.lib_dir         = 'lib/json/ext'
-  end
-
-  Rake::ExtensionTask.new do |ext|
-    ext.name            = 'generator'
-    ext.gem_spec        = spec_ext
-    ext.cross_compile   = true
-    ext.cross_platform  = %w[i386-mswin32 i386-mingw32]
-    ext.ext_dir         = 'ext/json/ext/generator'
-    ext.lib_dir         = 'lib/json/ext'
-  end
-end
-
-desc m = "Writing version information for #{PKG_VERSION}"
-task :version do
-  puts m
-  File.open(File.join('lib', 'json', 'version.rb'), 'w') do |v|
-    v.puts <<EOT
-module JSON
-  # JSON version
-  VERSION         = '#{PKG_VERSION}'
-  VERSION_ARRAY   = VERSION.split(/\\./).map { |x| x.to_i } # :nodoc:
-  VERSION_MAJOR   = VERSION_ARRAY[0] # :nodoc:
-  VERSION_MINOR   = VERSION_ARRAY[1] # :nodoc:
-  VERSION_BUILD   = VERSION_ARRAY[2] # :nodoc:
-end
-EOT
-  end
-end
-
-desc "Testing library (pure ruby)"
-task :test_pure => :clean do
-  ENV['JSON'] = 'pure'
-  ENV['RUBYOPT'] = "-Ilib #{ENV['RUBYOPT']}"
-  myruby '-S', 'testrb', *Dir['./tests/test_*.rb']
-end
-
-desc "Testing library (pure ruby and extension)"
-task :test => [ :test_pure, :test_ext ]
-
-
-if defined?(RUBY_ENGINE) and RUBY_ENGINE == 'jruby'
-  file JAVA_PARSER_SRC => JAVA_RAGEL_PATH do
-    cd JAVA_DIR do
-      if RAGEL_CODEGEN == 'ragel'
-        sh "ragel Parser.rl -J -o Parser.java"
-      else
-        sh "ragel -x Parser.rl | #{RAGEL_CODEGEN} -J"
-      end
-    end
-  end
-
-  desc "Generate parser for java with ragel"
-  task :ragel => JAVA_PARSER_SRC
-
-  desc "Delete the ragel generated Java source"
-  task :ragel_clean do
-    rm_rf JAVA_PARSER_SRC
-  end
-
-  JRUBY_JAR = File.join(Config::CONFIG["libdir"], "jruby.jar")
-  if File.exist?(JRUBY_JAR)
-    JAVA_SOURCES.each do |src|
-      classpath = (Dir['java/lib/*.jar'] << 'java/src' << JRUBY_JAR) * ':'
-      obj = src.sub(/\.java\Z/, '.class')
-      file obj => src do
-        sh 'javac', '-classpath', classpath, '-source', '1.5', src
-      end
-      JAVA_CLASSES << obj
-    end
-  else
-    warn "WARNING: Cannot find jruby in path => Cannot build jruby extension!"
-  end
-
-  desc "Compiling jruby extension"
-  task :compile_ext => JAVA_CLASSES
-
-  desc "Package the jruby gem"
-  task :jruby_gem => :create_jar do
-    sh 'gem build json-java.gemspec'
-    mkdir_p 'pkg'
-    mv "json-#{PKG_VERSION}-java.gem", 'pkg'
-  end
-
-  desc "Testing library (jruby)"
-  task :test_ext => :create_jar do
-    ENV['JSON'] = 'ext'
-    myruby '-S', 'testrb', '-Ilib', *Dir['./tests/test_*.rb']
-  end
-
-  file JRUBY_PARSER_JAR => :compile_ext do
-    cd 'java/src' do
-      parser_classes = FileList[
-        "json/ext/ByteListTranscoder*.class",
-        "json/ext/OptionsReader*.class",
-        "json/ext/Parser*.class",
-        "json/ext/RuntimeInfo*.class",
-        "json/ext/StringDecoder*.class",
-        "json/ext/Utils*.class"
-      ]
-      sh 'jar', 'cf', File.basename(JRUBY_PARSER_JAR), *parser_classes
-      mv File.basename(JRUBY_PARSER_JAR), File.dirname(JRUBY_PARSER_JAR)
-    end
-  end
-
-  desc "Create parser jar"
-  task :create_parser_jar => JRUBY_PARSER_JAR
-
-  file JRUBY_GENERATOR_JAR => :compile_ext do
-    cd 'java/src' do
-      generator_classes = FileList[
-        "json/ext/ByteListTranscoder*.class",
-        "json/ext/OptionsReader*.class",
-        "json/ext/Generator*.class",
-        "json/ext/RuntimeInfo*.class",
-        "json/ext/StringEncoder*.class",
-        "json/ext/Utils*.class"
-      ]
-      sh 'jar', 'cf', File.basename(JRUBY_GENERATOR_JAR), *generator_classes
-      mv File.basename(JRUBY_GENERATOR_JAR), File.dirname(JRUBY_GENERATOR_JAR)
-    end
-  end
-
-  desc "Create generator jar"
-  task :create_generator_jar => JRUBY_GENERATOR_JAR
-
-  desc "Create parser and generator jars"
-  task :create_jar => [ :create_parser_jar, :create_generator_jar ]
-
-  desc "Build all gems and archives for a new release of the jruby extension."
-  task :release => [ :clean, :version, :jruby_gem ]
-else
-  desc "Compiling extension"
-  task :compile_ext => [ EXT_PARSER_DL, EXT_GENERATOR_DL ]
-
-  file EXT_PARSER_DL => EXT_PARSER_SRC do
-    cd EXT_PARSER_DIR do
-      myruby 'extconf.rb'
-      sh MAKE
-    end
-    cp "#{EXT_PARSER_DIR}/parser.#{CONFIG['DLEXT']}", EXT_ROOT_DIR
-  end
-
-  file EXT_GENERATOR_DL => EXT_GENERATOR_SRC do
-    cd EXT_GENERATOR_DIR do
-      myruby 'extconf.rb'
-      sh MAKE
-    end
-    cp "#{EXT_GENERATOR_DIR}/generator.#{CONFIG['DLEXT']}", EXT_ROOT_DIR
-  end
-
-  desc "Testing library (extension)"
-  task :test_ext => :compile_ext do
-    ENV['JSON'] = 'ext'
-    ENV['RUBYOPT'] = "-Iext:lib #{ENV['RUBYOPT']}"
-    myruby '-S', 'testrb', *Dir['./tests/test_*.rb']
-  end
-
-  desc "Benchmarking parser"
-  task :benchmark_parser do
-    ENV['RUBYOPT'] = "-Ilib:ext #{ENV['RUBYOPT']}"
-    myruby 'benchmarks/parser_benchmark.rb'
-    myruby 'benchmarks/parser2_benchmark.rb'
-  end
-
-  desc "Benchmarking generator"
-  task :benchmark_generator do
-    ENV['RUBYOPT'] = "-Ilib:ext #{ENV['RUBYOPT']}"
-    myruby 'benchmarks/generator_benchmark.rb'
-    myruby 'benchmarks/generator2_benchmark.rb'
-  end
-
-  desc "Benchmarking library"
-  task :benchmark => [ :benchmark_parser, :benchmark_generator ]
-
-  desc "Create RDOC documentation"
-  task :doc => [ :version, EXT_PARSER_SRC ] do
-    sh "sdoc -o doc -t '#{PKG_TITLE}' -m README README lib/json.rb #{FileList['lib/json/**/*.rb']} #{EXT_PARSER_SRC} #{EXT_GENERATOR_SRC}"
-  end
-
-  desc "Generate parser with ragel"
-  task :ragel => EXT_PARSER_SRC
-
-  desc "Delete the ragel generated C source"
-  task :ragel_clean do
-    rm_rf EXT_PARSER_SRC
-  end
-
-  file EXT_PARSER_SRC => RAGEL_PATH do
-    cd EXT_PARSER_DIR do
-      if RAGEL_CODEGEN == 'ragel'
-        sh "ragel parser.rl -G2 -o parser.c"
-      else
-        sh "ragel -x parser.rl | #{RAGEL_CODEGEN} -G2"
-      end
-    end
-  end
-
-  desc "Generate diagrams of ragel parser (ps)"
-  task :ragel_dot_ps do
-    root = 'diagrams'
-    specs = []
-    File.new(RAGEL_PATH).grep(/^\s*machine\s*(\S+);\s*$/) { specs << $1 }
-    for s in specs
-      if RAGEL_DOTGEN == 'ragel'
-        sh "ragel #{RAGEL_PATH} -S#{s} -p -V | dot -Tps -o#{root}/#{s}.ps"
-      else
-        sh "ragel -x #{RAGEL_PATH} -S#{s} | #{RAGEL_DOTGEN} -p|dot -Tps -o#{root}/#{s}.ps"
-      end
-    end
-  end
-
-  desc "Generate diagrams of ragel parser (png)"
-  task :ragel_dot_png do
-    root = 'diagrams'
-    specs = []
-    File.new(RAGEL_PATH).grep(/^\s*machine\s*(\S+);\s*$/) { specs << $1 }
-    for s in specs
-      if RAGEL_DOTGEN == 'ragel'
-        sh "ragel #{RAGEL_PATH} -S#{s} -p -V | dot -Tpng -o#{root}/#{s}.png"
-      else
-        sh "ragel -x #{RAGEL_PATH} -S#{s} | #{RAGEL_DOTGEN} -p|dot -Tpng -o#{root}/#{s}.png"
-      end
-    end
-  end
-
-  desc "Generate diagrams of ragel parser"
-  task :ragel_dot => [ :ragel_dot_png, :ragel_dot_ps ]
-
-  task :environment do
-    ENV['RUBY_CC_VERSION'] = '1.8.7:1.9.2'
-  end
-
-  desc "Build all gems and archives for a new release of json and json_pure."
-  task :release => [ :clean, :version, :environment, :cross, :native, :gem, ] do
-    sh "#$0 clean native gem"
-    sh "#$0 clean package"
-  end
-end
-
-desc "Compile in the the source directory"
-task :default => [ :version ]