talon_one 2.0.0

data/vendor/bundle/ruby/2.7.0/gems/byebug-11.1.1/CONTRIBUTING.md

@@ -0,0 +1,58 @@
+# CONTRIBUTING
+
+Please note that this project is released with a [Contributor Code of
+Conduct](code_of_conduct.md). By participating in this project you agree to
+abide by its terms.
+
+## Bug Reports
+
+* Try to reproduce the issue against the latest revision. There might be
+  unrealeased work that fixes your problem!
+* Ensure that your issue has not already been reported.
+* Include the steps you carried out to produce the problem. If we can't
+  reproduce it, we can't fix it.
+* Include the behavior you observed along with the behavior you expected,
+  and why you expected it.
+
+## Development dependencies
+
+* `Byebug` depends on Ruby's TracePoint API provided by `ruby-core`. This is a
+  young API and a lot of bugs have been recently corrected, so make sure you
+  always have the lastest patch level release installed.
+* The recommended tool to manage development dependencies is `bundler`. Run
+  `gem install bundler` to install it.
+* Running `bundle install` inside a local clone of `byebug` will get development
+  dependencies installed.
+
+## Running the test suite
+
+* Make sure you compile the C-extension using `bin/rake compile`.
+  Otherwise you won't be able to use `byebug`.
+* Run the test suite using the default rake task (`bin/rake`). This task is
+  composed of 3 subtasks: `bin/rake compile`, `bin/rake test` & `bin/rake lint`.
+* If you want to run specific tests, use the provided test runner, like so:
+  * Specific test files. For example, `bin/minitest test/commands/break_test.rb`
+  * Specific test classes. For example, `bin/minitest BreakAtLinesTest`
+  * Specific tests. For example,
+    `bin/minitest test_catch_removes_specific_catchpoint`
+  * Specific fully qualified tests. For example,
+    `bin/minitest BreakAtLinesTest#test_setting_breakpoint_sets_correct_fields`
+  * You can combine any of them and you will get the union of all filters. For
+    example: `bin/minitest BreakAtLinesTest
+    test_catch_removes_specific_catchpoint`
+
+## Code style
+
+* Byebug uses several style checks to check code style consistent. You can run
+  those using `bin/rake lint`.
+
+## Byebug as a C-extension
+
+Byebug is a gem developed as a C-extension. The debugger internal's
+functionality is implemented in C (the interaction with the TracePoint API).
+The rest of the gem is implemented in Ruby. Normally you won't need to touch
+the C-extension, but it will obviously depended on the bug you're trying to fix
+or the feature you are willing to add. You can learn more about C-extensions
+[here](https://tenderlovemaking.com/2009/12/18/writing-ruby-c-extensions-part-1.html)
+or
+[here](https://tenderlovemaking.com/2010/12/11/writing-ruby-c-extensions-part-2.html).

data/vendor/bundle/ruby/2.7.0/gems/byebug-11.1.1/GUIDE.md

@@ -0,0 +1,1806 @@
+# GUIDE
+
+## Introduction
+
+### First Steps
+
+A handful of commands are enough to get started using `byebug`. The following
+session illustrates these commands. Take the following sample file:
+
+```ruby
+#
+# The n'th triangle number: triangle(n) = n*(n+1)/2 = 1 + 2 + ... + n
+#
+def triangle(n)
+  tri = 0
+
+  0.upto(n) { |i| tri += i }
+
+  tri
+end
+
+t = triangle(3)
+puts t
+
+```
+
+Let's debug it.
+
+```bash
+$ byebug /path/to/triangle.rb
+
+[1, 10] in /path/to/triangle.rb
+    1: #
+    2: # The n'th triangle number: triangle(n) = n*(n+1)/2 = 1 + 2 + ... + n
+    3: #
+=>  4: def triangle(n)
+    5:   tri = 0
+    6:
+    7:   0.upto(n) { |i| tri += i }
+    8:
+    9:   tri
+   10: end
+(byebug)
+```
+
+We are currently stopped before the first executable line of the program: line 4
+of `triangle.rb`. If you are used to less dynamic languages and have used
+debuggers for more statically compiled languages like C, C++, or Java, it may
+seem odd to be stopped before a function definition but in Ruby line 4 is
+executed.
+
+Byebug's prompt is `(byebug)`. If the program has died and you are in
+post-mortem debugging, `(byebug:post-mortem)` is used instead. If the program
+has terminated normally and the `--no-quit` option has been specified in the
+command line, the prompt will be `(byebug:ctrl)` instead. The commands available
+change depending on the program's state.
+
+Byebug automatically lists 10 lines of code centered around the current line
+every time it is stopped. The current line is marked with `=>`. If the range
+would overflow the beggining or the end of the file, byebug will move it
+accordingly so that only actual real lines of code are displayed.
+
+Now let us step through the program.
+
+```bash
+(byebug) step
+
+[5, 14] in /path/to/triangle.rb
+    5:   tri = 0
+    6:
+    7:   0.upto(n) { |i| tri += i }
+    8:
+    9:   tri
+   10: end
+   11:
+=> 12: t = triangle(3)
+   13: puts t
+(byebug) <RET> # hit enter
+
+[1, 10] in /path/to/triangle.rb
+    1: #
+    2: # The n'th triangle number: triangle(n) = n*(n+1)/2 = 1 + 2 + ... + n
+    3: #
+    4: def triangle(n)
+=>  5:   tri = 0
+    6:
+    7:   0.upto(n) { |i| tri += i }
+    8:
+    9:   tri
+   10: end
+(byebug) eval tri
+nil
+(byebug) step
+
+[2, 11] in /path/to/triangle.rb
+    2: # The n'th triangle number: triangle(n) = n*(n+1)/2 = 1 + 2 + ... + n
+    3: #
+    4: def triangle(n)
+    5:   tri = 0
+    6:
+=>  7:   0.upto(n) { |i| tri += i }
+    8:
+    9:   tri
+   10: end
+   11:
+(byebug) eval tri
+0
+```
+
+The first `step` command runs the script one executable unit. The second command
+we entered was just hitting the return key: `byebug` remembers the last command
+you entered was `step` and runs it again.
+
+One way to print the values of variables is `eval` (there are other ways). When we
+look at the value of `tri` the first time, we see it is `nil`. Again we are
+stopped _before_ the assignment on line 5, and this variable hadn't been set
+previously. However after issuing another `step` command we see that the value
+is 0 as expected. If every time we stop we want to see the value of `tri` to see
+how things are going, there is a better way by setting a display expression:
+
+```bash
+(byebug) display tri
+1: tri = 0
+```
+
+Now let us run the program until right before we return from the function. We'll
+want to see which lines get run, so we turn on _line tracing_. If we don't want
+whole paths to be displayed when tracing, we can turn on _basename_.
+
+```bash
+(byebug) set linetrace
+linetrace is on
+(byebug) set basename
+basename is on
+(byebug) finish 0
+Tracing: triangle.rb:7   0.upto(n) { |i| tri += i }
+1: tri = 0
+Tracing: triangle.rb:7   0.upto(n) { |i| tri += i }
+1: tri = 0
+Tracing: triangle.rb:7   0.upto(n) { |i| tri += i }
+1: tri = 1
+Tracing: triangle.rb:7   0.upto(n) { |i| tri += i }
+1: tri = 3
+Tracing: triangle.rb:9   tri
+1: tri = 6
+1: tri = 6
+
+[4, 13] in /home/davidr/Proyectos/byebug/triangle.rb
+    4: def triangle(n)
+    5:   tri = 0
+    6:
+    7:   0.upto(n) { |i| tri += i }
+    8:
+    9:   tri
+=> 10: end
+   11:
+   12: t = triangle(3)
+   13: puts t
+(byebug) quit
+Really quit? (y/n)
+y
+```
+
+So far, so good. As you can see from the above, to get out of `byebug`, one
+can issue a `quit` command (or the abbreviation `q`). If you want to quit
+without being prompted, suffix the command with an exclamation mark, e.g., `q!`.
+
+### Second Sample Session: Delving Deeper
+
+In this section we'll introduce breakpoints, the call stack and restarting.
+Below we will debug a simple Ruby program to solve the classic Towers of Hanoi
+puzzle. It is augmented by the bane of programming: some command-parameter
+processing with error checking.
+
+```ruby
+#
+# Solves the classic Towers of Hanoi puzzle.
+#
+def hanoi(n, a, b, c)
+  hanoi(n - 1, a, c, b) if n - 1 > 0
+
+  puts "Move disk #{a} to #{b}"
+
+  hanoi(n - 1, c, b, a) if n - 1 > 0
+end
+
+n_args = $ARGV.length
+
+raise("*** Need number of disks or no parameter") if n_args > 1
+
+n = 3
+
+if n_args > 0
+  begin
+    n = $ARGV[0].to_i
+  rescue ValueError
+    raise("*** Expecting an integer, got: #{$ARGV[0]}")
+  end
+end
+
+raise("*** Number of disks should be between 1 and 100") if n < 1 || n > 100
+
+hanoi(n, :a, :b, :c)
+```
+
+Recall in the first section it was stated that before the `def` is run, the
+method it names is undefined. Let's check that out. First let's see what
+private methods we can call before running `def hanoi`.
+
+```bash
+$ byebug path/to/hanoi.rb
+
+    1: #
+    2: # Solves the classic Towers of Hanoi puzzle.
+    3: #
+    4: def hanoi(n, a, b, c)
+    5:   hanoi(n - 1, a, c, b) if n - 1 > 0
+    6:
+    7:   puts "Move disk #{a} to #{b}"
+    8:
+    9:   hanoi(n - 1, c, b, a) if n - 1 > 0
+   10: end
+(byebug) private_methods
+public
+private
+include
+using
+define_method
+default_src_encoding
+DelegateClass
+Digest
+timeout
+initialize_copy
+initialize_dup
+initialize_clone
+sprintf
+format
+Integer
+Float
+String
+Array
+Hash
+warn
+raise
+fail
+global_variables
+__method__
+__callee__
+__dir__
+eval
+local_variables
+iterator?
+block_given?
+catch
+throw
+loop
+respond_to_missing?
+trace_var
+untrace_var
+at_exit
+syscall
+open
+printf
+print
+putc
+puts
+gets
+readline
+select
+readlines
+`
+p
+test
+srand
+rand
+trap
+load
+require
+require_relative
+autoload
+autoload?
+proc
+lambda
+binding
+caller
+caller_locations
+exec
+fork
+exit!
+system
+spawn
+sleep
+exit
+abort
+Rational
+Complex
+set_trace_func
+gem_original_require
+Pathname
+pp
+y
+URI
+rubygems_require
+initialize
+singleton_method_added
+singleton_method_removed
+singleton_method_undefined
+method_missing
+(byebug) private_methods.member?(:hanoi)
+false
+```
+
+`private_methods` is not a byebug command but a Ruby feature. By default, when
+`byebug` doesn't understand a command, it will evaluate it as if it was a Ruby
+command. You can use any Ruby to inspect your program's state at the place it
+is stopped.
+
+Now let's see what happens after stepping:
+
+```bash
+(byebug) step
+
+[5, 14] in /path/to/hanoi.rb
+    5:   hanoi(n - 1, a, c, b) if n - 1 > 0
+    6:
+    7:   puts "Move disk #{a} to #{b}"
+    8:
+    9:   hanoi(n - 1, c, b, a) if n - 1 > 0
+   10: end
+   11:
+=> 12: n_args = $ARGV.length
+   13:
+   14: raise("*** Need number of disks or no parameter") if n_args > 1
+(byebug) private_methods.member?(:hanoi)
+true
+(byebug)
+```
+
+Okay, lets go on and talk about program arguments.
+
+```bash
+(byebug) $ARGV
+[]
+```
+
+Oops. We forgot to specify any parameters to this program. Let's try again. We
+can use the `restart` command here.
+
+```bash
+(byebug) restart 3
+Re exec'ing:
+  /path/to/exe/byebug /path/to/hanoi.rb 3
+
+[1, 10] in /path/to/hanoi.rb
+    1: #
+    2: # Solves the classic Towers of Hanoi puzzle.
+    3: #
+=>  4: def hanoi(n, a, b, c)
+    5:   hanoi(n - 1, a, c, b) if n - 1 > 0
+    6:
+    7:   puts "Move disk #{a} to #{b}"
+    8:
+    9:   hanoi(n - 1, c, b, a) if n - 1 > 0
+   10: end
+(byebug) break 5
+Created breakpoint 1 at /path/to/hanoi.rb:5
+(byebug) continue
+Stopped by breakpoint 1 at /path/to/hanoi.rb:5
+
+[1, 10] in /path/to/hanoi.rb
+    1: #
+    2: # Solves the classic Towers of Hanoi puzzle.
+    3: #
+    4: def hanoi(n, a, b, c)
+=>  5:   hanoi(n - 1, a, c, b) if n - 1 > 0
+    6:
+    7:   puts "Move disk #{a} to #{b}"
+    8:
+    9:   hanoi(n - 1, c, b, a) if n - 1 > 0
+   10: end
+(byebug) display n
+1: n = 3
+(byebug) display a
+2: a = :a
+(byebug) display b
+3: b = :b
+(byebug) undisplay 3
+(byebug) continue
+Stopped by breakpoint 1 at /path/to/hanoi.rb:5
+1: n = 2
+2: a = :a
+[1, 10] in /path/to/hanoi.rb
+    1: #
+    2: # Solves the classic Towers of Hanoi puzzle.
+    3: #
+    4: def hanoi(n, a, b, c)
+=>  5:   hanoi(n - 1, a, c, b) if n - 1 > 0
+    6:
+    7:   puts "Move disk #{a} to #{b}"
+    8:
+    9:   hanoi(n - 1, c, b, a) if n - 1 > 0
+   10: end
+
+(byebug) c
+Stopped by breakpoint 1 at /path/to/hanoi.rb:5
+1: n = 1
+2: a = :a
+
+[1, 10] in /path/to/hanoi.rb
+    1: #
+    2: # Solves the classic Towers of Hanoi puzzle.
+    3: #
+    4: def hanoi(n, a, b, c)
+=>  5:   hanoi(n - 1, a, c, b) if n - 1 > 0
+    6:
+    7:   puts "Move disk #{a} to #{b}"
+    8:
+    9:   hanoi(n - 1, c, b, a) if n - 1 > 0
+   10: end
+(byebug) set nofullpath
+fullpath is off
+(byebug) where
+--> #0  Object.hanoi(n#Fixnum, a#Symbol, b#Symbol, c#Symbol) at .../shortpath/to/hanoi.rb:5
+    #1  Object.hanoi(n#Fixnum, a#Symbol, b#Symbol, c#Symbol) at .../shortpath/to/hanoi.rb:5
+    #2  <top (required)> at .../Proyectos/byebug/hanoi.rb:28
+(byebug)
+```
+
+In the above we added new commands: `break` (see [breakpoints]()), which
+indicates to stop just before that line of code is run, and `continue`, which
+resumes execution. To remove a display expression `undisplay` is used. If we
+give a display number, just that display expression is removed.
+
+We also used a new command `where`(see [backtrace]()) to show the callstack. In
+the above situation, starting from the bottom line we see we called the `hanoi`
+method from line 28 of the file `hanoi.rb` and the `hanoi` method called itself
+two more times at line 5.
+
+In the callstack we show a _current frame_ mark, the frame number, the method
+being called, the names of the parameters, the types those parameters
+_currently_ have and the file-line position. Remember it's possible that when
+the program was called the parameters had different types, since the types of
+variables can change dynamically. You can alter the style of what to show in the
+trace (see [callstyle]()).
+
+Now let's move around the callstack.
+
+```bash
+(byebug) undisplay
+Clear all expressions? (y/n) y
+(byebug) n_args
+NameError Exception: undefined local variable or method `n_args' for main:Object
+(byebug) frame 2
+
+[19, 28] in /path/to/hanoi.rb
+   19:   begin
+   20:     n = $ARGV[0].to_i
+   21:   rescue ValueError
+   22:     raise("*** Expecting an integer, got: #{$ARGV[0]}")
+   23:   end
+   24: end
+   25:
+   26: raise("*** Number of disks should be between 1 and 100") if n < 1 || n > 100
+   27:
+=> 28: hanoi(n, :a, :b, :c)
+(byebug) n_args
+1
+(byebug) eval n
+3
+(byebug) down 2
+
+[1, 10] in /path/to/hanoi.rb
+    1: #
+    2: # Solves the classic Towers of Hanoi puzzle.
+    3: #
+    4: def hanoi(n, a, b, c)
+=>  5:   hanoi(n - 1, a, c, b) if n - 1 > 0
+    6:
+    7:   puts "Move disk #{a} to #{b}"
+    8:
+    9:   hanoi(n - 1, c, b, a) if n - 1 > 0
+   10: end
+(byebug) eval n
+2
+```
+
+Notice in the above to get the value of variable `n` we had to use a print
+command like `eval n`. If we entered just `n`, that would be taken to mean byebug
+command `next`. In the current scope, variable `n_args` is not defined.  However
+I can change to the top-most frame by using the `frame 2` command. Notice that
+inside frame #2, the value of `n_args` can be shown. Also note that the value of
+variable `n` is different.
+
+### Attaching to a running program with `byebug`
+
+In the previous sessions we've been calling byebug right at the outset, but
+there is another mode of operation you might use. If there's a lot of code that
+needs to be run before the part you want to inspect, it might not be efficient
+or convenient to run byebug from the outset.
+
+In this section we'll show how to enter the code in the middle of your program,
+while delving more into byebug's operation. We will also use unit testing. Using
+unit tests will greatly reduce the amount of debugging needed, while at the same
+time, will increase the quality of your program.
+
+What we'll do is take the `triangle` code from the first session and write a
+unit test for that. In a sense we did write a tiny test for the program which
+was basically the last line where we printed the value of `triangle(3)`. This
+test however wasn't automated: the expectation is that someone would look at the
+output and verify that what was printed is what was expected.
+
+Before we can turn that into something that can be `required`, we probably want
+to remove that output. However I like to keep in that line so that when I
+look at the file, I have an example of how to run it.  Therefore we will
+conditionally run this line if that file is invoked directly, but skip it if it
+is not. _NOTE: `byebug` resets `$0` to try to make things like this work._
+
+```ruby
+if __FILE__ == $PROGRAM_NAME
+  t = triangle(3)
+  puts t
+end
+```
+
+Okay, we're now ready to write our unit test and we'll use the `minitest`
+framework for that. Here's the test code, it should be placed in the same
+directory as `triangle.rb`.
+
+```ruby
+require "minitest/autorun"
+require_relative "triangle.rb"
+
+class TestTriangle < Minitest::Test
+  def test_basic
+    solutions = []
+
+    0.upto(5) { |i| solutions << triangle(i) }
+
+    assert_equal([0, 1, 3, 6, 10, 15], solutions, "First 5 triangle numbers")
+  end
+end
+```
+
+Let's say we want to stop before the first statement in our test method, we'll
+add the following:
+
+```ruby
+...
+def test_basic
+  byebug
+  solutions = []
+...
+```
+
+Now we run the program, requiring `byebug`
+
+```bash
+$ ruby -rbyebug test_triangle.rb
+Run options: --seed 31679
+
+# Running:
+
+[2, 11] in test_triangle.rb
+    2: require_relative "triangle.rb"
+    3:
+    4: class TestTriangle < Minitest::Test
+    5:   def test_basic
+    6:     byebug
+=>  7:     solutions = []
+    8:
+    9:     0.upto(5) { |i| solutions << triangle(i) }
+   10:
+   11:     assert_equal([0, 1, 3, 6, 10, 15], solutions, "First 5 triangle numbers")
+(byebug)
+```
+
+and we see that we are stopped at line 7 just before the initialization of the
+list `solutions`.
+
+Now let's see where we are...
+
+```bash
+(byebug) set nofullpath
+Displaying frame's full file names is off.
+(byebug) bt
+--> #0  TestTriangle.test_basic at .../Proyectos/byebug/test_triangle.rb:7
+    #1  block (3 levels) in Minitest::Test.run at .../lib/minitest/test.rb:108
+    #2  Minitest::Test.capture_exceptions at .../lib/minitest/test.rb:206
+    #3  block (2 levels) in Minitest::Test.run at .../lib/minitest/test.rb:105
+    #4  Minitest::Test.time_it at .../lib/minitest/test.rb:258
+    #5  block in Minitest::Test.run at .../lib/minitest/test.rb:104
+    #6  #<Class:Minitest::Runnable>.on_signal(name#String, action#Proc) at .../minitest-5.5.0/lib/minitest.rb:321
+    #7  Minitest::Test.with_info_handler(&block#Proc) at .../lib/minitest/test.rb:278
+    #8  Minitest::Test.run at .../lib/minitest/test.rb:103
+    #9  #<Class:Minitest>.run_one_method(klass#Class, method_name#String) at .../minitest-5.5.0/lib/minitest.rb:768
+    #10 #<Class:Minitest::Runnable>.run_one_method(klass#Class, method_name#String, reporter#Minitest::CompositeReporter) at .../minitest-5.5.0/lib/minitest.rb:295
+    #11 block (2 levels) in #<Class:Minitest::Runnable>.run(reporter#Minitest::CompositeReporter, options#Hash) at .../minitest-5.5.0/lib/minitest.rb:289
+    ͱ-- #12 Array.each at .../minitest-5.5.0/lib/minitest.rb:288
+    #13 block in #<Class:Minitest::Runnable>.run(reporter#Minitest::CompositeReporter, options#Hash) at .../minitest-5.5.0/lib/minitest.rb:288
+    #14 #<Class:Minitest::Runnable>.on_signal(name#String, action#Proc) at .../minitest-5.5.0/lib/minitest.rb:321
+    #15 #<Class:Minitest::Runnable>.with_info_handler(reporter#Minitest::CompositeReporter, &block#Proc) at .../minitest-5.5.0/lib/minitest.rb:308
+    #16 #<Class:Minitest::Runnable>.run(reporter#Minitest::CompositeReporter, options#Hash) at .../minitest-5.5.0/lib/minitest.rb:287
+    #17 block in #<Class:Minitest>.__run(reporter#Minitest::CompositeReporter, options#Hash) at .../minitest-5.5.0/lib/minitest.rb:150
+    ͱ-- #18 Array.map at .../minitest-5.5.0/lib/minitest.rb:150
+    #19 #<Class:Minitest>.__run(reporter#Minitest::CompositeReporter, options#Hash) at .../minitest-5.5.0/lib/minitest.rb:150
+    #20 #<Class:Minitest>.run(args#Array) at .../minitest-5.5.0/lib/minitest.rb:127
+    #21 block in #<Class:Minitest>.autorun at .../minitest-5.5.0/lib/minitest.rb:56
+(byebug)
+```
+
+We get the same result as if we had run byebug from the outset.
+
+### Debugging Oddities: How debugging Ruby may be different from other languages
+
+If you are used to debugging in other languages like C, C++, Perl, Java or even
+Bash (see [bashdb](http://bashdb.sourceforge.net)), there may be a number of things that
+seem or feel a little bit different and may confuse you. A number of these
+things aren't oddities of the debugger per se but differences in how Ruby works
+compared to those other languages. Because Ruby works a little differently from
+those other languages, writing a debugger has to also be a little different as
+well if it is to be useful. In this respect, using Byebug may help you
+understand Ruby better.
+
+We've already seen one such difference: the fact that we stop on method
+definitions or `def`'s and that is because these are in fact executable
+statements. In other compiled languages this would not happen because that's
+already been done when you compile the program (or in Perl when it scans in the
+program). In this section we'll consider some other things that might throw off
+new users to Ruby who are familiar with other languages and debugging in them.
+
+#### Bouncing Around in Blocks (iterators)
+
+When debugging languages with coroutines like Python and Ruby, a method call may
+not necessarily go to the first statement after the method header. It's possible
+that the call will continue after a `yield` statement from a prior call.
+
+```ruby
+#
+# Enumerator for primes
+#
+class SievePrime
+  def initialize
+    @odd_primes = []
+  end
+
+  def next_prime
+    candidate = 2
+    yield candidate
+    not_prime = false
+    candidate += 1
+
+    loop do
+      @odd_primes.each do |p|
+        not_prime = (0 == (candidate % p))
+        break if not_prime
+      end
+
+      unless not_prime
+        @odd_primes << candidate
+        yield candidate
+      end
+
+      candidate += 2
+    end
+  end
+end
+
+SievePrime.new.next_prime do |prime|
+  puts prime
+  break if prime > 10
+end
+```
+
+```bash
+$ byebug primes.rb
+[1, 10] in /path/to/primes.rb
+    1: #
+    2: # Enumerator for primes
+    3: #
+=>  4: class SievePrime
+    5:   def initialize
+    6:     @odd_primes = []
+    7:   end
+    8:
+    9:   def self.next_prime(&block)
+   10:    candidate = 2
+(byebug) set linetrace
+line tracing is on.
+(byebug) set basename
+basename in on.
+(byebug) step 9
+Tracing: primes.rb:5   def initialize
+Tracing: primes.rb:9   def next_prime
+Tracing: primes.rb:31 SievePrime.new.next_prime do |prime|
+Tracing: primes.rb:6     @odd_primes = []
+Tracing: primes.rb:10     candidate = 2
+Tracing: primes.rb:11     yield candidate
+Tracing: primes.rb:32   puts prime
+2
+Tracing: primes.rb:33   break if prime > 10
+Tracing: primes.rb:12     not_prime = false
+
+[7, 16] in /path/to/primes.rb
+    7:   end
+    8:
+    9:   def next_prime
+   10:     candidate = 2
+   11:     yield candidate
+=> 12:     not_prime = false
+   13:     candidate += 1
+   14:
+   15:     loop do
+   16:       @odd_primes.each do |p|
+   17:         not_prime = (0 == (candidate % p))
+(byebug)
+```
+
+The loop between lines 31-34 gets interleaved between those of
+`SievePrime#next_prime`, lines 9-28 above.
+
+#### No Parameter Values in a Call Stack
+
+In traditional debuggers, in a call stack you can generally see the names of the
+parameters and the values that were passed in.
+
+Ruby is a very dynamic language and it tries to be efficient within the confines
+of the language definition. Values generally aren't taken out of a variable or
+expression and pushed onto a stack. Instead a new scope is created and the
+parameters are given initial values. Parameter passing is by _reference_ not by
+_value_ as it is say Algol, C, or Perl. During the execution of a method,
+parameter values can change (and often do). In fact even the _class_ of the
+object can change.
+
+So at present, the name of the parameter is shown. The call-style setting
+([callstyle]()) can be used to set whether the name is shown or the name and the
+_current_ class of the object.
+
+#### Lines You Can Stop At
+
+Consider the following little Ruby program.
+
+```ruby
+"Yes it does" =~ /
+(Yes) \s+
+it  \s+
+does
+/ix
+puts $1
+```
+
+The stopping points that Ruby records are the last two lines, lines 5 and 6.
+
+Inside `byebug` you can get a list of stoppable lines for a file using the `info
+file` command.
+
+### Threading support
+
+Byebug supports debugging Ruby programs making use of multiple threads.
+
+Let's consider the following sample program:
+
+```ruby
+class Company
+  def initialize(task)
+    @tasks, @results = Queue.new, Queue.new
+
+    @tasks.push(task)
+  end
+
+  def run
+    manager = Thread.new { manager_routine }
+    employee = Thread.new { employee_routine }
+
+    sleep 6
+
+    go_home(manager)
+    go_home(employee)
+  end
+
+  #
+  # An employee doing his thing
+  #
+  def employee_routine
+    loop do
+      if @tasks.empty?
+        have_a_break(0.1)
+      else
+        work_hard(@tasks.pop)
+      end
+    end
+  end
+
+  #
+  # A manager doing his thing
+  #
+  def manager_routine
+    loop do
+      if @results.empty?
+        have_a_break(1)
+      else
+        show_off(@results.pop)
+      end
+    end
+  end
+
+  private
+
+  def show_off(result)
+    puts result
+  end
+
+  def work_hard(task)
+    task ** task
+  end
+
+  def have_a_break(amount)
+    sleep amount
+  end
+
+  def go_home(person)
+    person.kill
+  end
+end
+
+Company.new(10).run
+```
+
+The `Company` class simulates a real company. The company has a manager and an
+employee represented by 2 threads: they work concurrently to achieve the
+company's targets.
+
+* The employee looks for tasks to complete. If there are tasks, it works hard to
+  complete them. Otherwise he has a quick break.
+
+```ruby
+#
+# An employee doing his thing
+#
+def employee_routine
+  loop do
+    if @tasks.empty?
+      have_a_break(0.1)
+    else
+      work_hard(@tasks.pop)
+    end
+  end
+end
+```
+
+* The manager, on the other hand, sits there all day and sporadically checks
+  whether there are any results to show off.
+
+```ruby
+#
+# A manager doing his thing
+#
+def manager_routine
+  loop do
+    if @results.empty?
+      have_a_break(1)
+    else
+      show_off(@results.pop)
+    end
+  end
+end
+```
+
+We do some abstractions easily readable in the code. Our tasks are just a
+`Queue` of numbers, so are our results. What our employer does when he works is
+some calculation with those numbers and what the manager does with the results
+is printing them to the screen.
+
+We instantiate a new company with an initial task and after running that
+company we expect the result to be printed in the screen, but it is not.  Lets
+debug our sample program:
+
+```bash
+[1, 10] in /path/to/company.rb
+=>  1: class Company
+    2:   def initialize(task)
+    3:     @tasks, @results = Queue.new, Queue.new
+    4:
+    5:     @tasks.push(task)
+    6:   end
+    7:
+    8:   def run
+    9:     manager = Thread.new { manager_routine }
+   10:     employee = Thread.new { employee_routine }
+(byebug) l
+
+[11, 20] in /path/to/company.rb
+   11:
+   12:     sleep 6
+   13:
+   14:     go_home(manager)
+   15:     go_home(employee)
+   16:   end
+   17:
+   18:   #
+   19:   # An employee doing his thing
+   20:   #
+
+(byebug) c 12
+Stopped by breakpoint 1 at /path/to/company.rb:12
+
+[7, 16] in /path/to/company.rb
+    7:
+    8:   def run
+    9:     manager = Thread.new { manager_routine }
+   10:     employee = Thread.new { employee_routine }
+   11:
+=> 12:     sleep 6
+   13:
+   14:     go_home(manager)
+   15:     go_home(employee)
+   16:   end
+(byebug) th l
++ 1 #<Thread:0x0000000192f328 run> /path/to/company.rb:12
+  2 #<Thread:0x00000001ff9870@/path/to/company.rb:9 sleep>
+  3 #<Thread:0x00000001ff80d8@/path/to/company.rb:10 sleep>
+```
+
+What we have done here is just start our program and advance to the point
+inmediately after our `employee` and `manager` threads have been created. We
+can then check that the threads are there using the `thread list` command. Now
+we want to debug both of this threads to check what's happening and look for the
+bug.
+
+```bash
+(byebug) th switch 3
+
+[5, 14] in /path/to/company.rb
+    5:     @tasks.push(task)
+    6:   end
+    7:
+    8:   def run
+    9:     manager = Thread.new { manager_routine }
+=> 10:     employee = Thread.new { employee_routine }
+   11:
+   12:     sleep 6
+   13:
+   14:     go_home(manager)
+(byebug) th stop 1; th stop 2
+$ 1 #<Thread:0x00000001307310 sleep> /path/to/company.rb:12
+$ 2 #<Thread:0x000000018bf438 sleep> /path/to/company.rb:9
+(byebug) th l
+$ 1 #<Thread:0x00000001307310 sleep> /path/to/company.rb:12
+$ 2 #<Thread:0x000000018bf438@/path/to/company.rb:9 sleep> /path/to/company.rb:55
++ 3 #<Thread:0x00000001ff80d8@/path/to/company.rb:10 sleep> /path/to/company.rb:10
+```
+
+We have started by debugging the `employee` thread. To do that, we switch to
+that thread using the `thread switch 3` command. The thread number is the one
+specified by `thread list`, we know this is our worker thread because `thread
+list` specifies where the thread is defined in the file (and its current
+position if the thread is currently running).
+
+After that we stopped the main thread and the worker thread, using the command
+`thread stop`. We do this because we want to focus on the employee thread first
+and don't want the program to finish while we are debugging. Notice that stopped
+threads are marked with the "$" symbol whereas the current thread is marked with
+the "+" symbol.
+
+```bash
+(byebug) s
+
+[17, 26] in /path/to/company.rb
+   17:
+   18:   #
+   19:   # An employee doing his thing
+   20:   #
+   21:   def employee_routine
+=> 22:     loop do
+   23:       if @tasks.empty?
+   24:         have_a_break(0.1)
+   25:       else
+   26:         work_hard(@tasks.pop)
+(byebug) s
+
+[18, 27] in /path/to/company.rb
+   18:   #
+   19:   # An employee doing his thing
+   20:   #
+   21:   def employee_routine
+   22:     loop do
+=> 23:       if @tasks.empty?
+   24:         have_a_break(0.1)
+   25:       else
+   26:         work_hard(@tasks.pop)
+   27:       end
+(byebug) n
+
+[21, 30] in /path/to/company.rb
+   21:   def employee_routine
+   22:     loop do
+   23:       if @tasks.empty?
+   24:         have_a_break(0.1)
+   25:       else
+=> 26:         work_hard(@tasks.pop)
+   27:       end
+   28:     end
+   29:   end
+   30:
+(byebug) s
+
+[49, 58] in /path/to/company.rb
+   49:   def show_off(result)
+   50:     puts result
+   51:   end
+   52:
+   53:   def work_hard(task)
+=> 54:     task ** task
+   55:   end
+   56:
+   57:   def have_a_break(amount)
+   58:     sleep amount
+(byebug) s
+
+[21, 30] in /path/to/company.rb
+   21:   #
+   22:   # An employee doing his thing
+   23:   #
+   24:   def employee_routine
+   25:     loop do
+=> 26:       if @tasks.empty?
+   27:         have_a_break(0.1)
+   28:       else
+   29:         work_hard(@tasks.pop)
+   30:       end
+(byebug) n
+
+[22, 31] in /path/to/company.rb
+   22:   # An employee doing his thing
+   23:   #
+   24:   def employee_routine
+   25:     loop do
+   26:       if @tasks.empty?
+=> 27:         have_a_break(0.1)
+   28:       else
+   29:         work_hard(@tasks.pop)
+   30:       end
+   31:     end
+(byebug) n
+
+[21, 30] in /path/to/company.rb
+   21:   #
+   22:   # An employee doing his thing
+   23:   #
+   24:   def employee_routine
+   25:     loop do
+=> 26:       if @tasks.empty?
+   27:         have_a_break(0.1)
+   28:       else
+   29:         work_hard(@tasks.pop)
+   30:       end
+   31:     end
+(byebug)
+```
+
+Everything seems fine in this thread. The first iteration the employee will do
+his job, and after that it will just check for new tasks and sleep. Let's debug
+the manager task now:
+
+```bash
+(byebug) th resume 2
+  2 #<Thread:0x000000019892d8@/path/to/company.rb:12 run> /path/to/company.rb:12
+(byebug) th switch 2
+  2 #<Thread:0x000000019892d8@/path/to/company.rb:12 sleep> /path/to/company.rb:12
+
+[7, 16] in /path/to/company.rb
+    7:
+    8:   #
+    9:   # A CEO running his company
+   10:   #
+   11:   def run
+=> 12:     manager = Thread.new { manager_routine }
+   13:     employee = Thread.new { employee_routine }
+   14:
+   15:     sleep 6
+   16:
+(byebug)
+```
+
+We used the command `thread resume` to restart the manager's thread and then
+switch to it using `thread switch`. It's important to resume the thread's
+execution before switching to it, otherwise we'll get a hang because we cannot
+run a sleeping thread.
+
+Now we can investigate the problem in the employer's side:
+
+```bash
+(byebug) s
+[30, 39] in /path/to/company.rb
+   30:
+   31:   #
+   32:   # A manager doing his thing
+   33:   #
+   34:   def manager_routine
+=> 35:     loop do
+   36:       if @results.empty?
+   37:         have_a_break(1)
+   38:       else
+   39:         show_off(@results.pop)
+(byebug) s
+
+[31, 40] in /path/to/company.rb
+   31:   #
+   32:   # A manager doing his thing
+   33:   #
+   34:   def manager_routine
+   35:     loop do
+=> 36:       if @results.empty?
+   37:         have_a_break(1)
+   38:       else
+   39:         show_off(@results.pop)
+   40:       end
+(byebug) n
+
+[32, 41] in /path/to/company.rb
+   32:   # A manager doing his thing
+   33:   #
+   34:   def manager_routine
+   35:     loop do
+   36:       if @results.empty?
+=> 37:         have_a_break(1)
+   38:       else
+   39:         show_off(@results.pop)
+   40:       end
+   41:     end
+(byebug) n
+
+[31, 40] in /path/to/company.rb
+   31:   #
+   32:   # A manager doing his thing
+   33:   #
+   34:   def manager_routine
+   35:     loop do
+=> 36:       if @results.empty?
+   37:         have_a_break(1)
+   38:       else
+   39:         show_off(@results.pop)
+   40:       end
+(byebug)
+```
+
+Now we can see the problem, the `@results` variable is always empty! The
+employee forgot to leave the results in his manager's deck. We fix it by
+changing the line
+
+```ruby
+work_hard(@tasks.pop)
+```
+
+in the `employee_routine` method with the line
+
+```ruby
+@results << work_hard(@tasks.pop)
+```
+
+To be continued...
+
+* More complex examples with objects, pretty printing and irb.
+* Line tracing and non-interactive tracing.
+* Post-mortem debugging.
+
+## Getting in & out
+
+### Starting byebug
+
+There is a wrapper script called `byebug` which basically `require`'s the gem
+then loads `byebug` before its argument (the program to be debugged) is started.
+If you don't need to pass dash options to your program, which might be confused
+with byebug options, then you don't need to add the `--`. To get a brief list of
+options and descriptions, use the `--help` option.
+
+```bash
+$ byebug --help
+
+  byebug 3.5.1
+
+  Usage: byebug [options] <script.rb> -- <script.rb parameters>
+
+    -d, --debug               Set $DEBUG=true
+    -I, --include list        Add to paths to $LOAD_PATH
+    -m, --[no-]post-mortem    Use post-mortem mode
+    -q, --[no-]quit           Quit when script finishes
+    -x, --[no-]rc             Run byebug initialization file
+    -s, --[no-]stop           Stop when script is loaded
+    -r, --require file        Require library before script
+    -R, --remote [host:]port  Remote debug [host:]port
+    -t, --[no-]trace          Turn on line tracing
+    -v, --version             Print program version
+    -h, --help                Display this message
+
+```
+
+Many options appear as a long option name, such as `--help` and a short one
+letter option name, such as `-h`. The list of options is detailed below:
+
+#### -h | --help
+
+It causes `byebug` to print some basic help and exit.
+
+#### -v | --version
+
+It causes `byebug` to print its version number and exit.
+
+#### -d | --debug
+
+Sets `$DEBUG` to `true`. Compatible with Ruby's flag.
+
+#### -I | --include path
+
+Adds `path` to load path. `path` can be a single path or a colon separated path
+list.
+
+#### -m | --post-mortem
+
+If your program raises an exception that isn't caught you can enter byebug for
+inspection of what went wrong. You may also want to use this option in
+conjunction with `--no-stop`. See also [Post-Mortem Debugging]().
+
+#### --no-quit
+
+Keep inside `byebug` after your program terminates normally.
+
+#### --no-stop
+
+Normally `byebug` stops before executing the first statement. If instead you
+want it to start running initially and perhaps break it later in the execution,
+use this option.
+
+#### -r | --require lib
+
+Requires the library before executing the script.  This option is compatible
+with Ruby's.
+
+#### -t | --trace
+
+Turns on line tracing. Running `byebug --trace <rubyscript>.rb` is pretty much
+like running `ruby -rtracer <rubyscript>.rb`. If all you want to do however is
+get a line trace, `tracer` is most likely faster than `byebug`.
+
+```bash
+$ time byebug --trace --no-stop hanoi.rb > /dev/null
+
+real 0m0.743s
+user 0m0.668s
+sys  0m0.068s
+$ time ruby -rtracer hanoi.rb > /dev/null
+
+real 0m0.077s
+user 0m0.072s
+sys  0m0.004s
+```
+
+### Byebug default options
+
+Byebug has many command-line options,; it seems that some people want to set
+them differently from the defaults. For example, some people may want
+`--no-quit` to be the default behavior. One could write a wrapper script or set
+a shell alias to handle this.
+
+### Command Files
+
+A command file is a file of lines that are `byebug` commands. Comments (lines
+starting with `#`) may also be included. An empty line in a command file does
+nothing; it does not mean to repeat the last command, as it would from the
+terminal.
+
+When you start `byebug`, it automatically executes commands from its
+_init file_, called `.byebugrc`. During startup, `byebug` does the following:
+
+* __Processes command line options and operands.__ Reads the init file in your
+  current directory, if any, and then checks your home directory. The home
+  directory is the directory named in the `$HOME` or `$HOMEPATH` environment
+  variable. Thus, you can have more than one init file, one generic in your home
+  directory, and another, specific to the program you are debugging, in the
+  directory where you invoke `byebug`.
+
+You can also request the execution of a command file with the `source` command
+(see [Source]()).
+
+### Quitting byebug
+
+To exit `byebug`, use the `quit` command (abbreviated to `q`). Normally, if you
+are in an interactive session, this command will prompt to ask if you really
+want to quit. If you want to quit without being prompted, enter `quit
+unconditionally` (abbreviated to `q!`).
+
+Another way to terminate byebug is to use the `kill` command. This does the
+more forceful `kill -9`. It can be used in cases where `quit` doesn't work (I
+haven't seen those yet).
+
+### Calling byebug from inside your program
+
+Running a program from byebug adds a bit of overhead and slows it down a little.
+Furthermore, by necessity, debuggers change the operation of the program they
+are debugging. And this can lead to unexpected and unwanted differences. It has
+happened so often that the term
+[Heisenbugs](https://en.wikipedia.org/wiki/Heisenbug) was coined to describe the
+situation where using a debugger (among other possibilities) changes the
+behavior of the program so that the bug doesn't manifest itself anymore.
+
+There is another way to get into byebug which adds no overhead or slowdown until
+you reach the point at which you want to start debugging. However here you must
+change the script and make an explicit call to byebug. Because byebug isn't
+involved before the first call, there is no overhead and the script will run
+at the same speed as if there were no byebug.
+
+To enter byebug this way, just drop `byebug` in whichever line you want to start
+debugging at. You also have to require byebug somehow. If using bundler, it will
+take care of that for you, otherwise you can use the ruby `-r` flag or add
+`require "byebug"` in the line previous to the `byebug` call.
+
+If speed is crucial, you may want to start and stop this around certain sections
+of code, using `Byebug.start` and `Byebug.stop`. Alternatively, instead of
+issuing an explicit `Byebug.stop` you can add a block to the `Byebug.start` and
+debugging is turned on for that block. If the block of code raises an uncaught
+exception that would cause the block to terminate, the `stop` will occur.  See
+[Byebug.start with a block]().
+
+When `byebug`is run, `.byebugrc` is read.
+
+You may want to enter byebug at several points in the program where there is a
+problem you want to investigate. And since `byebug` is just a method call it's
+possible to enclose it in a conditional expression, for example
+
+```ruby
+byebug if "bar" == foo and 20 == iter_count
+```
+
+### Restarting Byebug
+
+You can restart the program using `restart [program args]`. This is a re-exec -
+all byebug state is lost. If command arguments are passed, those are used.
+Otherwise program arguments from the last invocation are used.
+
+You won't be able to restart your program in all cases. First, the program
+should have been invoked at the outset rather than having been called from
+inside your program or invoked as a result of post-mortem handling.
+
+Also, since this relies on the OS `exec` call, this command is available only if
+your OS supports `exec`.
+
+## Debugging remote programs
+
+It is possible to set up debugging so that you can issue byebug commands from
+outside the process running the Ruby code. In fact, you might even be on a
+different computer than the one running the Ruby program.
+
+To setup remote debugging, drop the following somewhere before the point in the
+program that you want to debug (In Rails, the
+`config/environments/development.rb` could be a good candidate).
+
+```ruby
+  require "byebug/core"
+  Byebug.wait_connection = true
+  Byebug.start_server("localhost", <port>)
+```
+
+Once this piece gets executed, you can connect to the remote debugger from your
+local machine, by running: `byebug -R localhost:<port>`.
+
+Next, at a place of program execution which gets run just before the code you
+want to debug, add a call to `byebug` as was done without remote execution:
+
+```ruby
+   # work, work, work...
+   byebug
+   some ruby code  # byebug will stop before this line is run
+```
+
+## Byebug Command Reference
+
+### Command Syntax
+
+Usually a command is put on a single line. There is no limit on how long it can
+be. It starts with a command name, which is followed by arguments whose meaning
+depends on the command name. For example, the command `step` accepts an
+argument which is the number of times to step, as in `step 5`. You can also use
+the `step` command with no arguments. Some commands do not allow any arguments.
+
+Multiple commands can be put on a line by separating each with a semicolon `;`.
+You can disable the meaning of a semicolon to separate commands by escaping it
+with a backslash.
+
+For example, you might want to enter the following code to compute the 5th
+Fibonacci number.
+
+```bash
+(byebug) fib1=0; fib2=1; 5.times {|temp| temp=fib1; fib1=fib2; fib2 += temp }
+0
+1
+SyntaxError Exception: /home/davidr/Proyectos/sample_app/trace.rb:1: syntax
+error, unexpected end-of-input, expecting '}'
+ 5.times { |temp| temp=fib1
+                           ^
+nil
+1
+SyntaxError Exception: /home/davidr/Proyectos/sample_app/trace.rb:1: syntax
+error, unexpected tSTRING_DEND, expecting end-of-input
+ fib2 += temp }
+               ^
+nil
+(byebug) fib1=0\; fib2=1\; 5.times {|temp| temp=fib1\; fib1=fib2\; fib2 += temp }
+5
+(byebug) fib2
+8
+```
+
+You might also consider using the [irb]() or [pry]() commands and then you
+won't have to escape semicolons.
+
+A blank line as input (typing just `<RET>`) means to repeat the previous
+command.
+
+Byebug uses readline, which handles line editing and retrieval of previous
+commands. Up arrow, for example, moves to the previous byebug command; down
+arrow moves to the next more recent command (provided you are not already at
+the last command). Command history is saved in file `.byebug_history`. A limit
+is put on the history size. You can see this with the `show history size`
+command. See [history]() for history parameters.
+
+### Command Output
+
+In the command-line interface, when `byebug` is waiting for input it presents a
+prompt of the form `(byebug)`. If the program has terminated normally the prompt
+will be `(byebug:ctrl)` and in post-mortem debugging it will be
+`(byebug:post-mortem)`.
+
+Whenever `byebug` gives an error message such as for an invalid command or an
+invalid location position, it will generally preface the message with `***`.
+
+### Command Help
+
+Once inside `byebug` you can always ask it for information on its commands using
+the `help` command. You can use `help` (abbreviated `h`) with no arguments to
+display a short list of named classes of commands
+
+```bash
+(byebug) help
+
+  break      -- Sets breakpoints in the source code
+  catch      -- Handles exception catchpoints
+  condition  -- Sets conditions on breakpoints
+  continue   -- Runs until program ends, hits a breakpoint or reaches a line
+  delete     -- Deletes breakpoints
+  disable    -- Disables breakpoints or displays
+  display    -- Evaluates expressions every time the debugger stops
+  down       -- Moves to a lower frame in the stack trace
+  edit       -- Edits source files
+  enable     -- Enables breakpoints or displays
+  finish     -- Runs the program until frame returns
+  frame      -- Moves to a frame in the call stack
+  help       -- Helps you using byebug
+  history    -- Shows byebug's history of commands
+  info       -- Shows several informations about the program being debugged
+  interrupt  -- Interrupts the program
+  irb        -- Starts an IRB session
+  kill       -- Sends a signal to the current process
+  list       -- Lists lines of source code
+  method     -- Shows methods of an object, class or module
+  next       -- Runs one or more lines of code
+  pry        -- Starts a Pry session
+  quit       -- Exits byebug
+  restart    -- Restarts the debugged program
+  save       -- Saves current byebug session to a file
+  set        -- Modifies byebug settings
+  show       -- Shows byebug settings
+  skip       -- Runs until the next breakpoint as long as it is different from the current one
+  source     -- Restores a previously saved byebug session
+  step       -- Steps into blocks or methods one or more times
+  thread     -- Commands to manipulate threads
+  tracevar   -- Enables tracing of a global variable
+  undisplay  -- Stops displaying all or some expressions when program stops
+  untracevar -- Stops tracing a global variable
+  up         -- Moves to a higher frame in the stack trace
+  var        -- Shows variables and its values
+  where      -- Displays the backtrace
+
+```
+
+With a command name, `help` displays information on how to use the command.
+
+```bash
+(byebug) help list
+
+  l[ist][[-=]][ nn-mm]
+
+  Lists lines of source code
+
+  Lists lines forward from current line or from the place where code was
+  last listed. If "list-" is specified, lists backwards instead. If
+  "list=" is specified, lists from current line regardless of where code
+  was last listed. A line range can also be specified to list specific
+  sections of code.
+(byebug)
+```
+
+A number of commands, namely `info`, `set`, `show`, `enable` and `disable`, have
+many sub-parameters or _subcommands_. When you ask for help for one of these
+commands, you will get help for all of the subcommands that command offers.
+Sometimes you may want help only on a subcommand and to do this just follow the
+command with its subcommand name. For example, `help info breakpoints`will just
+give help about the `info breakpoints` command. Furthermore it will give longer
+help than the summary information that appears when you ask for help. You don't
+need to list the full subcommand name, just enough of the letters to make that
+subcommand distinct from others will do. For example, `help info b` is the same
+as `help info breakpoints`.
+
+Some examples follow.
+
+```bash
+(byebug) help info
+info[ subcommand]
+
+Generic command for showing things about the program being debugged.
+
+--
+List of "info" subcommands:
+--
+info args        -- Argument variables of current stack frame
+info breakpoints -- Status of user-settable breakpoints
+info catch       -- Exceptions that can be caught in the current stack frame
+info display     -- Expressions to display when program stops
+info file        -- Info about a particular file read in
+info files       -- File names and timestamps of files read in
+info line        -- Line number and filename of current position in source file
+info program     -- Execution status of the program
+```
+
+```bash
+(byebug) help info breakpoints
+Status of user-settable breakpoints.
+Without argument, list info about all breakpoints.
+With an integer argument, list info on that breakpoint.
+```
+
+```bash
+(byebug) help info b
+Status of user-settable breakpoints.
+Without argument, list info about all breakpoints.
+With an integer argument, list info on that breakpoint.
+```
+
+### Control Commands: quit, restart, source
+
+#### Quit
+
+To exit `byebug`, type `quit` (abbreviated to `q`). Normally, if you are in an
+interactive session, this command will prompt you to confirm you really want to
+quit. If you want to quit without being prompted, enter `quit unconditionally`
+(abbreviated to `q!`).
+
+#### Restart
+
+To restart the program, use the `restart|r` command. This is a re-exec - all
+`byebug` state is lost. If command arguments are passed, those are used.
+Otherwise program arguments from the last invocation are used.
+
+You won't be able to restart your program in all cases. First, the program
+should have been invoked at the outset rather than having been called from
+inside your program or invoked as a result of post-mortem handling.
+
+#### Source
+
+You can run `byebug` commands inside a file, using the command `source <file>`.
+The lines in a command file are executed sequentially. They are not printed as
+they are executed. If there is an error, execution proceeds to the next command
+in the file. For information about command files that get run automatically on
+startup see [Command Files]().
+
+### Display Commands: display, undisplay
+
+#### Display
+
+If you find that you want to print the value of an expression frequently (to see
+how it changes), you might want to add it to the *automatic display list** so
+that `byebug` evaluates it each time your program stops or after a line is
+printed if line tracing is enabled. Each expression added to the list is given a
+number to identify it; to remove an expression from the list, you specify that
+number. The automatic display looks like this:
+
+```bash
+(byebug) display n
+1: n = 3
+```
+
+This display shows item numbers, expressions and their current values. If the
+expression is undefined or illegal the expression will be printed but no value
+will appear.
+
+```bash
+(byebug) display undefined_variable
+2: undefined_variable =
+(byebug) display 1/0
+3: 1/0 =
+```
+
+If you use `display` with no argument, `byebug` will display the current values
+of the expressions in the list, just as it is done when your program stops.
+Using `info display` has the same effect.
+
+#### Undisplay
+
+To remove an item from the list, use `undisplay` followed by the number
+identifying the expression you want to remove. `undisplay` does not repeat if
+you press `<RET>`after using it (otherwise you would just get the error _No
+display number n_)
+
+You can also temporarily disable or enable display expressions, so that the will
+not be printed but they won't be forgotten either, so you can toggle them again
+later. To do that, use `disable display` or `enable display` followed by the
+expression number.
+
+### Evaluation of expressions: irb, pry
+
+To examine and change data in your script you can just evaluate any Ruby code
+from `byebug`'s prompt. Any input that is not recognized as a command will be
+evaluated, so `byebug` essentially works as a REPL. If you want to evaluate
+something that conflicts with a `byebug` command, just use Ruby's `eval`. For
+example, if you want to print a variable called `n`, type `eval n` because
+typing just `n` will execute `byebug`'s command `next`.
+
+Finally, if you need more advanced functionality from REPL's, you can enter
+`irb` or `pry` using `irb` or `pry` commands. The binding's environment will be
+set to the current state in the program.  When you leave the repl and go back to
+`byebug`'s command prompt we show the file, line and text position of the
+program. If you issue a `list` without location information, the default
+location used is the current line rather than the current position that may have
+got updated via a prior `list` command.
+
+```
+$ byebug triangle.rb
+[1, 10] in /path/to/triangle.rb
+    1: # Compute the n'th triangle number, the hard way: triangle(n) == (n*(n+1))/2
+=>  2: def triangle(n)
+    3:   tri = 0
+    4:   0.upto(n) do |i|
+    5:     tri += i
+    6:   end
+    7:   tri
+    8: end
+    9:
+   10: if __FILE__ == $0
+(byebug) irb
+irb(main):001:0> (0..6).inject { |sum, i| sum += i }
+ => 21
+irb(main):002:0> exit
+(byebug)
+```
+
+### Printing variables: var
+
+Byebug can print many different information about variables. Such as
+
+* `var const <object>`. Show the constants of `<object>`. This is basically
+  listing variables and their values in `<object>.constant`.
+* `var instance <object>`. Show the instance variables of `<object>`. This is
+  basically listing `<object>.instance_variables`.
+* `var instance`. Show instance_variables of `self`.
+* `var local`. Show local variables.
+* `var global`. Show global variables.
+* `var all`. Show local, global and instance and class variables of `self`.
+* `method instance <object>`. Show methods of `<object>`. Basically this is the
+  same as running `<object>.instance_methods(false)`.
+* `method <class-or-module>`. Show methods of the class or module
+  `<class-or-module>`. Basically this is the same as running
+  `<class-or-module>.methods`.
+
+### Examining Program Source Files: list
+
+`byebug` can print parts of your script's source.  When your script stops,
+`byebug` spontaneously lists the source code around the line where it stopped
+that line. It does that when you change the current stack frame as well.
+Implicitly there is a default line location. Each time a list command is run
+that implicit location is updated, so that running several list commands in
+succession shows a contiguous block of program text.
+
+If you don't need code context displayed every time, you can issue the `set
+noautolist` command. Now whenever you want code listed, you can explicitly issue
+the `list` command or its abbreviation `l`. Notice that when a second listing is
+displayed, we continue listing from the place we last left off. When the
+beginning or end of the file is reached, the line range to be shown is adjusted
+so "it doesn't overflow". You can set the `noautolist` option by default by
+dropping `set noautolist` in byebug's startup file `.byebugrc`.
+
+If you want to set how many lines to be printed by default rather than use the
+initial number of lines, 10, use the `set listsize` command ([listsize()). To
+see the entire program in one shot, give an explicit starting and ending line
+number. You can print other portions of source files by giving explicit position
+as a parameter to the list command.
+
+There are several ways to specify what part of the file you want to print. `list
+nnn` prints lines centered around line number `nnn` in the current source file.
+`l` prints more lines, following the last lines printed. `list -` prints lines
+just before the lines last printed. `list nnn-mmm` prints lines between `nnn`
+and `mmm` inclusive. `list =` prints lines centered around where the script is
+stopped. Repeating a `list` command with `RET` discards the argument, so it is
+equivalent to typing just `list`.  This is more useful than listing the same
+lines again. An exception is made for an argument of `-`: that argument is
+preserved in repetition so that each repetition moves up in the source file.
+
+### Editing Source files: edit
+
+To edit a source file, use the `edit` command.  The editor of your choice is invoked
+with the current line set to the active line in the program. Alternatively, you can
+give a line specification to specify what part of the file you want to edit.
+
+You can customize `byebug` to use any editor you want by using the `EDITOR`
+environment variable. The only restriction is that your editor (say `ex`) recognizes
+the following command-line syntax:
+
+```
+ex +nnn file
+```
+
+The optional numeric value `+nnn` specifies the line number in the file where
+you want to start editing. For example, to configure `byebug` to use the `vi` editor,
+you could use these commands with the `sh` shell:
+
+```bash
+EDITOR=/usr/bin/vi
+export EDITOR
+byebug ...
+```
+
+or in the `csh` shell,
+
+```bash
+setenv EDITOR /usr/bin/vi
+byebug ...
+```
+
+### The stack trace
+
+When your script has stopped, one thing you'll probably want to know is where
+it stopped and some idea of how it got there.
+
+Each time your script calls a method or enters a block, information about this
+action is saved. This information is what we call a _stack frame_ or just a
+_frame_. The set of all frames at a certain point in the program's execution is
+called the _stack trace_ or just the _stack_. Each frame contains a line number
+and the source-file name that the line refers to. If the frame is the beginning
+of a method it also contains the method name.
+
+When your script is started, the stack has only one frame, that of the `main`
+method. This is called the _initial frame_ or the _outermost frame_. Each time
+a method is called, a new frame is added to the stack trace. Each time a method
+returns, the frame for that method invocation is removed. If a method is
+recursive, there can be many frames for the same method. The frame for the
+method in which execution is actually occurring is called the _innermost
+frame_. This is the most recently created of all the stack frames that still
+exist.
+
+Every time the debugger stops, one entry in the stack is selected as the
+current frame. Many byebug commands refer implicitly to the selected block. In
+particular, whenever you ask Byebug to list lines without giving a line number
+or location the value is found in the selected frame. There are special
+commands to select whichever frame you're interested in, such as `up`, `down`
+and `frame`.
+
+After switching frames, when you issue a `list` command without any position
+information, the position used is the location in the frame that you just
+switched between, rather than a location that got updated via a prior `list`
+command.
+
+Byebug assigns numbers to all existing stack frames, starting with zero for the
+_innermost frame_, one for the frame that called it, and so on upward. These
+numbers do not really exist in your script, they are assigned by Byebug to give
+you a way of designating stack frames in commands.
+
+### Printing the Stack: `where` command
+
+The command `where`, aliased to `bt` or `backtrace` prints the call stack., It
+shows one line per frame, for many frames, starting with the place that you are
+stopped at (frame zero), followed by its caller (frame one), and on up the
+stack. Each frame is numbered and can be referred to in the `frame` command.
+The position of the current frame is marked with `-->`.
+
+The are some special frames generated for methods that are implemented in C.
+One such method is `each`. They are marked differently in the call stack to
+indicate that we cannot switch to those frames. This is because they have no
+source code in Ruby, so we can not debug them using Byebug.
+
+```bash
+(byebug) where
+--> #0 Object.gcd(a#Fixnum, b#Fixnum) at line gcd.rb:6
+    #1 at line gcd.rb:19
+```
+
+### Selecting a frame: `up`, `down` and `frame` commands
+
+* `up <n>`: Move `n` frames up the stack, towards the outermost frame (higher
+  frame numbers, frames that have existed longer). `n` defaults to one.
+
+* `down <n>`: Move `n` frames down the stack, towards the _innermost frame_
+  (lower frame numbers, frames that were created more recently). `n` defaults to
+  one.
+
+* `frame <n>`: Allows you to move to an arbitrary frame. `n` is the stack frame
+  number or 0 if no frame number is given. `frame 0` will show the current and
+  most recent stack frame. If a negative number is given, counting is from the
+  other end of the stack frame, so `frame -1` shows the least-recent, outermost
+  stack frame. Without an argument, `frame` prints the current stack frame.