symbolic_enum 1.1.4 → 1.1.5

data/vendor/bundle/ruby/2.7.0/gems/loofah-2.4.0/test/unit/test_scrubbers.rb

@@ -0,0 +1,14 @@
+require "helper"
+
+class UnitTestScrubbers < Loofah::TestCase
+  [ Loofah::HTML::Document, Loofah::HTML::DocumentFragment ].each do |klass|
+    context klass do
+      context "bad scrub method" do
+        it "raise a ScrubberNotFound exception" do
+          doc = klass.parse "<p>foo</p>"
+          assert_raises(Loofah::ScrubberNotFound) { doc.scrub! :frippery }
+        end
+      end
+    end
+  end
+end

data/vendor/bundle/ruby/2.7.0/gems/mail-2.7.1/MIT-LICENSE

@@ -0,0 +1,20 @@
+Copyright (c) 2009-2016 Mikel Lindsaar
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+'Software'), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED 'AS IS', WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

data/vendor/bundle/ruby/2.7.0/gems/mail-2.7.1/README.md

@@ -0,0 +1,695 @@
+# Mail [![Build Status](https://travis-ci.org/mikel/mail.png?branch=master)](https://travis-ci.org/mikel/mail)
+
+## Introduction
+
+Mail is an internet library for Ruby that is designed to handle emails
+generation, parsing and sending in a simple, rubyesque manner.
+
+The purpose of this library is to provide a single point of access to handle
+all email functions, including sending and receiving emails.  All network
+type actions are done through proxy methods to Net::SMTP, Net::POP3 etc.
+
+Built from my experience with TMail, it is designed to be a pure ruby
+implementation that makes generating, sending and parsing emails a no
+brainer.
+
+It is also designed from the ground up to work with the more modern versions
+of Ruby.  This is because Ruby > 1.9 handles text encodings much more wonderfully
+than Ruby 1.8.x and so these features have been taken full advantage of in this
+library allowing Mail to handle a lot more messages more cleanly than TMail.
+Mail does run on Ruby 1.8.x... it's just not as fun to code.
+
+Finally, Mail has been designed with a very simple object oriented system
+that really opens up the email messages you are parsing, if you know what
+you are doing, you can fiddle with every last bit of your email directly.
+
+## Donations
+
+Mail has been downloaded millions of times, by people around the world, in fact,
+it represents more than 1% of *all* gems downloaded.
+
+It is (like all open source software) a labour of love and something I am doing
+with my own free time.  If you would like to say thanks, please feel free to
+[make a donation](http://www.pledgie.com/campaigns/8790) and feel free to send
+me a nice email :)
+
+<a href='http://www.pledgie.com/campaigns/8790'><img alt='Click here to lend your support to: mail and make a donation at www.pledgie.com !' src='http://www.pledgie.com/campaigns/8790.png?skin_name=chrome' border='0' /></a>
+
+# Contents
+* [Compatibility](#compatibility)
+* [Discussion](#discussion)
+* [Current Capabilities of Mail](#current-capabilities-of-mail)
+* [Roadmap](#roadmap)
+* [Testing Policy](#testing-policy)
+* [API Policy](#api-policy)
+* [Installation](#installation)
+* [Encodings](#encodings)
+* [Contributing](#contributing)
+* [Usage](#usage)
+* [Core Extensions](#core-extensions)
+* [Excerpts from TREC Span Corpus 2005](#excerpts-from-trec-span-corpus-2005)
+* [License](#license)
+
+## Compatibility
+
+Mail supports Ruby 1.8.7+, including JRuby and Rubinius.
+
+Every Mail commit is tested by Travis on [all supported Ruby versions](https://github.com/mikel/mail/blob/master/.travis.yml).
+
+## Discussion
+
+If you want to discuss mail with like minded individuals, please subscribe to
+the [Google Group](http://groups.google.com/group/mail-ruby).
+
+## Current Capabilities of Mail
+
+* RFC5322 Support, Reading and Writing
+* RFC6532 Support, reading UTF-8 headers
+* RFC2045-2049 Support for multipart emails
+* Support for creating multipart alternate emails
+* Support for reading multipart/report emails &amp; getting details from such
+* Wrappers for File, Net/POP3, Net/SMTP
+* Auto-encoding of non-US-ASCII bodies and header fields
+
+Mail is RFC5322 and RFC6532 compliant now, that is, it can parse US-ASCII and UTF-8
+emails and generate US-ASCII emails. There are a few obsoleted syntax emails that
+it will have problems with, but it also is quite robust, meaning, if it finds something
+it doesn't understand it will not crash, instead, it will skip the problem and keep
+parsing. In the case of a header it doesn't understand, it will initialise the header
+as an optional unstructured field and continue parsing.
+
+This means Mail won't (ever) crunch your data (I think).
+
+You can also create MIME emails.  There are helper methods for making a
+multipart/alternate email for text/plain and text/html (the most common pair)
+and you can manually create any other type of MIME email.
+
+## Roadmap
+
+Next TODO:
+
+* Improve MIME support for character sets in headers, currently works, mostly, needs
+  refinement.
+
+## Testing Policy
+
+Basically... we do BDD on Mail.  No method gets written in Mail without a
+corresponding or covering spec.  We expect as a minimum 100% coverage
+measured by RCov.  While this is not perfect by any measure, it is pretty
+good.  Additionally, all functional tests from TMail are to be passing before
+the gem gets released.
+
+It also means you can be sure Mail will behave correctly.
+
+Note: If you care about core extensions (aka "monkey-patching"), please read the Core Extensions section near the end of this README.
+
+## API Policy
+
+No API removals within a single point release.  All removals to be deprecated with
+warnings for at least one MINOR point release before removal.
+
+Also, all private or protected methods to be declared as such - though this is still I/P.
+
+## Installation
+
+Installation is fairly simple, I host mail on rubygems, so you can just do:
+
+    # gem install mail
+
+## Encodings
+
+If you didn't know, handling encodings in Emails is not as straight forward as you
+would hope.
+
+I have tried to simplify it some:
+
+1. All objects that can render into an email, have an `#encoded` method.  Encoded will
+   return the object as a complete string ready to send in the mail system, that is,
+   it will include the header field and value and CRLF at the end and wrapped as
+   needed.
+
+2. All objects that can render into an email, have a `#decoded` method.  Decoded will
+   return the object's "value" only as a string.  This means it will not include
+   the header fields (like 'To:' or 'Subject:').
+
+3. By default, calling <code>#to_s</code> on a container object will call its encoded
+   method, while <code>#to_s</code> on a field object will call its decoded method.
+   So calling <code>#to_s</code> on a Mail object will return the mail, all encoded
+   ready to send, while calling <code>#to_s</code> on the From field or the body will
+   return the decoded value of the object. The header object of Mail is considered a
+   container. If you are in doubt, call <code>#encoded</code>, or <code>#decoded</code>
+   explicitly, this is safer if you are not sure.
+
+4. Structured fields that have parameter values that can be encoded (e.g. Content-Type) will
+   provide decoded parameter values when you call the parameter names as methods against
+   the object.
+
+5. Structured fields that have parameter values that can be encoded (e.g. Content-Type) will
+   provide encoded parameter values when you call the parameter names through the
+   <code>object.parameters['<parameter_name>']</code> method call.
+
+## Contributing
+
+Please do!  Contributing is easy in Mail.  Please read the CONTRIBUTING.md document for more info
+
+## Usage
+
+All major mail functions should be able to happen from the Mail module.
+So, you should be able to just <code>require 'mail'</code> to get started.
+
+### Making an email
+
+```ruby
+mail = Mail.new do
+  from    'mikel@test.lindsaar.net'
+  to      'you@test.lindsaar.net'
+  subject 'This is a test email'
+  body    File.read('body.txt')
+end
+
+mail.to_s #=> "From: mikel@test.lindsaar.net\r\nTo: you@...
+```
+
+### Making an email, have it your way:
+
+```ruby
+mail = Mail.new do
+  body File.read('body.txt')
+end
+
+mail['from'] = 'mikel@test.lindsaar.net'
+mail[:to]    = 'you@test.lindsaar.net'
+mail.subject = 'This is a test email'
+
+mail.header['X-Custom-Header'] = 'custom value'
+
+mail.to_s #=> "From: mikel@test.lindsaar.net\r\nTo: you@...
+```
+
+### Don't Worry About Message IDs:
+
+```ruby
+mail = Mail.new do
+  to   'you@test.lindsaar.net'
+  body 'Some simple body'
+end
+
+mail.to_s =~ /Message\-ID: <[\d\w_]+@.+.mail/ #=> 27
+```
+
+Mail will automatically add a Message-ID field if it is missing and
+give it a unique, random Message-ID along the lines of:
+
+    <4a7ff76d7016_13a81ab802e1@local.host.mail>
+
+### Or do worry about Message-IDs:
+
+```ruby
+mail = Mail.new do
+  to         'you@test.lindsaar.net'
+  message_id '<ThisIsMyMessageId@some.domain.com>'
+  body       'Some simple body'
+end
+
+mail.to_s =~ /Message\-ID: <ThisIsMyMessageId@some.domain.com>/ #=> 27
+```
+
+Mail will take the message_id you assign to it trusting that you know
+what you are doing.
+
+### Sending an email:
+
+Mail defaults to sending via SMTP to local host port 25.  If you have a
+sendmail or postfix daemon running on this port, sending email is as
+easy as:
+
+```ruby
+Mail.deliver do
+  from     'me@test.lindsaar.net'
+  to       'you@test.lindsaar.net'
+  subject  'Here is the image you wanted'
+  body     File.read('body.txt')
+  add_file '/full/path/to/somefile.png'
+end
+```
+
+or
+
+```ruby
+mail = Mail.new do
+  from     'me@test.lindsaar.net'
+  to       'you@test.lindsaar.net'
+  subject  'Here is the image you wanted'
+  body     File.read('body.txt')
+  add_file :filename => 'somefile.png', :content => File.read('/somefile.png')
+end
+
+mail.deliver!
+```
+
+Sending via sendmail can be done like so:
+
+```ruby
+mail = Mail.new do
+  from     'me@test.lindsaar.net'
+  to       'you@test.lindsaar.net'
+  subject  'Here is the image you wanted'
+  body     File.read('body.txt')
+  add_file :filename => 'somefile.png', :content => File.read('/somefile.png')
+end
+
+mail.delivery_method :sendmail
+
+mail.deliver
+```
+
+Sending via smtp (for example to [mailcatcher](https://github.com/sj26/mailcatcher))
+```ruby
+
+Mail.defaults do
+  delivery_method :smtp, address: "localhost", port: 1025
+end
+```
+
+
+Exim requires its own delivery manager, and can be used like so:
+
+```ruby
+mail.delivery_method :exim, :location => "/usr/bin/exim"
+
+mail.deliver
+```
+
+Mail may be "delivered" to a logfile, too, for development and testing:
+
+```ruby
+# Delivers by logging the encoded message to $stdout
+mail.delivery_method :logger
+
+# Delivers to an existing logger at :debug severity
+mail.delivery_method :logger, logger: other_logger, severity: :debug
+```
+
+### Getting Emails from a POP Server:
+
+You can configure Mail to receive email using <code>retriever_method</code>
+within <code>Mail.defaults</code>:
+
+```ruby
+Mail.defaults do
+  retriever_method :pop3, :address    => "pop.gmail.com",
+                          :port       => 995,
+                          :user_name  => '<username>',
+                          :password   => '<password>',
+                          :enable_ssl => true
+end
+```
+
+You can access incoming email in a number of ways.
+
+The most recent email:
+
+```ruby
+Mail.all    #=> Returns an array of all emails
+Mail.first  #=> Returns the first unread email
+Mail.last   #=> Returns the last unread email
+```
+
+The first 10 emails sorted by date in ascending order:
+
+```ruby
+emails = Mail.find(:what => :first, :count => 10, :order => :asc)
+emails.length #=> 10
+```
+
+Or even all emails:
+
+```ruby
+emails = Mail.all
+emails.length #=> LOTS!
+```
+
+
+### Reading an Email
+
+```ruby
+mail = Mail.read('/path/to/message.eml')
+
+mail.envelope_from   #=> 'mikel@test.lindsaar.net'
+mail.from.addresses  #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
+mail.sender.address  #=> 'mikel@test.lindsaar.net'
+mail.to              #=> 'bob@test.lindsaar.net'
+mail.cc              #=> 'sam@test.lindsaar.net'
+mail.subject         #=> "This is the subject"
+mail.date.to_s       #=> '21 Nov 1997 09:55:06 -0600'
+mail.message_id      #=> '<4D6AA7EB.6490534@xxx.xxx>'
+mail.decoded         #=> 'This is the body of the email...
+```
+
+Many more methods available.
+
+### Reading a Multipart Email
+
+```ruby
+mail = Mail.read('multipart_email')
+
+mail.multipart?          #=> true
+mail.parts.length        #=> 2
+mail.body.preamble       #=> "Text before the first part"
+mail.body.epilogue       #=> "Text after the last part"
+mail.parts.map { |p| p.content_type }  #=> ['text/plain', 'application/pdf']
+mail.parts.map { |p| p.class }         #=> [Mail::Message, Mail::Message]
+mail.parts[0].content_type_parameters  #=> {'charset' => 'ISO-8859-1'}
+mail.parts[1].content_type_parameters  #=> {'name' => 'my.pdf'}
+```
+
+Mail generates a tree of parts.  Each message has many or no parts.  Each part
+is another message which can have many or no parts.
+
+A message will only have parts if it is a multipart/mixed or multipart/related
+content type and has a boundary defined.
+
+### Testing and Extracting Attachments
+```ruby
+mail.attachments.each do | attachment |
+  # Attachments is an AttachmentsList object containing a
+  # number of Part objects
+  if (attachment.content_type.start_with?('image/'))
+    # extracting images for example...
+    filename = attachment.filename
+    begin
+      File.open(images_dir + filename, "w+b", 0644) {|f| f.write attachment.decoded}
+    rescue => e
+      puts "Unable to save data for #{filename} because #{e.message}"
+    end
+  end
+end
+```
+### Writing and Sending a Multipart/Alternative (HTML and Text) Email
+
+Mail makes some basic assumptions and makes doing the common thing as
+simple as possible.... (asking a lot from a mail library)
+
+```ruby
+mail = Mail.deliver do
+  to      'nicolas@test.lindsaar.net.au'
+  from    'Mikel Lindsaar <mikel@test.lindsaar.net.au>'
+  subject 'First multipart email sent with Mail'
+
+  text_part do
+    body 'This is plain text'
+  end
+
+  html_part do
+    content_type 'text/html; charset=UTF-8'
+    body '<h1>This is HTML</h1>'
+  end
+end
+```
+
+Mail then delivers the email at the end of the block and returns the
+resulting Mail::Message object, which you can then inspect if you
+so desire...
+
+```
+puts mail.to_s #=>
+
+To: nicolas@test.lindsaar.net.au
+From: Mikel Lindsaar <mikel@test.lindsaar.net.au>
+Subject: First multipart email sent with Mail
+Content-Type: multipart/alternative;
+  boundary=--==_mimepart_4a914f0c911be_6f0f1ab8026659
+Message-ID: <4a914f12ac7e_6f0f1ab80267d1@baci.local.mail>
+Date: Mon, 24 Aug 2009 00:15:46 +1000
+Mime-Version: 1.0
+Content-Transfer-Encoding: 7bit
+
+
+----==_mimepart_4a914f0c911be_6f0f1ab8026659
+Content-ID: <4a914f12c8c4_6f0f1ab80268d6@baci.local.mail>
+Date: Mon, 24 Aug 2009 00:15:46 +1000
+Mime-Version: 1.0
+Content-Type: text/plain
+Content-Transfer-Encoding: 7bit
+
+This is plain text
+----==_mimepart_4a914f0c911be_6f0f1ab8026659
+Content-Type: text/html; charset=UTF-8
+Content-ID: <4a914f12cf86_6f0f1ab802692c@baci.local.mail>
+Date: Mon, 24 Aug 2009 00:15:46 +1000
+Mime-Version: 1.0
+Content-Transfer-Encoding: 7bit
+
+<h1>This is HTML</h1>
+----==_mimepart_4a914f0c911be_6f0f1ab8026659--
+```
+
+Mail inserts the content transfer encoding, the mime version,
+the content-id's and handles the content-type and boundary.
+
+Mail assumes that if your text in the body is only us-ascii, that your
+transfer encoding is 7bit and it is text/plain.  You can override this
+by explicitly declaring it.
+
+### Making Multipart/Alternate, Without a Block
+
+You don't have to use a block with the text and html part included, you
+can just do it declaratively.  However, you need to add Mail::Parts to
+an email, not Mail::Messages.
+
+```ruby
+mail = Mail.new do
+  to      'nicolas@test.lindsaar.net.au'
+  from    'Mikel Lindsaar <mikel@test.lindsaar.net.au>'
+  subject 'First multipart email sent with Mail'
+end
+
+text_part = Mail::Part.new do
+  body 'This is plain text'
+end
+
+html_part = Mail::Part.new do
+  content_type 'text/html; charset=UTF-8'
+  body '<h1>This is HTML</h1>'
+end
+
+mail.text_part = text_part
+mail.html_part = html_part
+```
+
+Results in the same email as done using the block form
+
+### Getting Error Reports from an Email:
+
+```ruby
+@mail = Mail.read('/path/to/bounce_message.eml')
+
+@mail.bounced?         #=> true
+@mail.final_recipient  #=> rfc822;mikel@dont.exist.com
+@mail.action           #=> failed
+@mail.error_status     #=> 5.5.0
+@mail.diagnostic_code  #=> smtp;550 Requested action not taken: mailbox unavailable
+@mail.retryable?       #=> false
+```
+
+### Attaching and Detaching Files
+
+You can just read the file off an absolute path, Mail will try
+to guess the mime_type and will encode the file in Base64 for you.
+
+```ruby
+@mail = Mail.new
+@mail.add_file("/path/to/file.jpg")
+@mail.parts.first.attachment? #=> true
+@mail.parts.first.content_transfer_encoding.to_s #=> 'base64'
+@mail.attachments.first.mime_type #=> 'image/jpg'
+@mail.attachments.first.filename #=> 'file.jpg'
+@mail.attachments.first.decoded == File.read('/path/to/file.jpg') #=> true
+```
+
+Or You can pass in file_data and give it a filename, again, mail
+will try and guess the mime_type for you.
+
+```ruby
+@mail = Mail.new
+@mail.attachments['myfile.pdf'] = File.read('path/to/myfile.pdf')
+@mail.parts.first.attachment? #=> true
+@mail.attachments.first.mime_type #=> 'application/pdf'
+@mail.attachments.first.decoded == File.read('path/to/myfile.pdf') #=> true
+```
+
+You can also override the guessed MIME media type if you really know better
+than mail (this should be rarely needed)
+
+```ruby
+@mail = Mail.new
+@mail.attachments['myfile.pdf'] = { :mime_type => 'application/x-pdf',
+                                    :content => File.read('path/to/myfile.pdf') }
+@mail.parts.first.mime_type #=> 'application/x-pdf'
+```
+
+Of course... Mail will round trip an attachment as well
+
+```ruby
+@mail = Mail.new do
+  to      'nicolas@test.lindsaar.net.au'
+  from    'Mikel Lindsaar <mikel@test.lindsaar.net.au>'
+  subject 'First multipart email sent with Mail'
+
+  text_part do
+    body 'Here is the attachment you wanted'
+  end
+
+  html_part do
+    content_type 'text/html; charset=UTF-8'
+    body '<h1>Funky Title</h1><p>Here is the attachment you wanted</p>'
+  end
+
+  add_file '/path/to/myfile.pdf'
+end
+
+@round_tripped_mail = Mail.new(@mail.encoded)
+
+@round_tripped_mail.attachments.length #=> 1
+@round_tripped_mail.attachments.first.filename #=> 'myfile.pdf'
+```
+See "Testing and extracting attachments" above for more details.
+
+## Using Mail with Testing or Spec'ing Libraries
+
+If mail is part of your system, you'll need a way to test it without actually
+sending emails, the TestMailer can do this for you.
+
+```ruby
+require 'mail'
+=> true
+Mail.defaults do
+  delivery_method :test
+end
+=> #<Mail::Configuration:0x19345a8 @delivery_method=Mail::TestMailer>
+Mail::TestMailer.deliveries
+=> []
+Mail.deliver do
+  to 'mikel@me.com'
+  from 'you@you.com'
+  subject 'testing'
+  body 'hello'
+end
+=> #<Mail::Message:0x19284ec ...
+Mail::TestMailer.deliveries.length
+=> 1
+Mail::TestMailer.deliveries.first
+=> #<Mail::Message:0x19284ec ...
+Mail::TestMailer.deliveries.clear
+=> []
+```
+
+There is also a set of RSpec matchers stolen/inspired by Shoulda's ActionMailer matchers (you'll want to set <code>delivery_method</code> as above too):
+
+```ruby
+Mail.defaults do
+  delivery_method :test # in practice you'd do this in spec_helper.rb
+end
+
+describe "sending an email" do
+  include Mail::Matchers
+
+  before(:each) do
+    Mail::TestMailer.deliveries.clear
+
+    Mail.deliver do
+      to ['mikel@me.com', 'mike2@me.com']
+      from 'you@you.com'
+      subject 'testing'
+      body 'hello'
+    end
+  end
+
+  it { is_expected.to have_sent_email } # passes if any email at all was sent
+
+  it { is_expected.to have_sent_email.from('you@you.com') }
+  it { is_expected.to have_sent_email.to('mike1@me.com') }
+
+  # can specify a list of recipients...
+  it { is_expected.to have_sent_email.to(['mike1@me.com', 'mike2@me.com']) }
+
+  # ...or chain recipients together
+  it { is_expected.to have_sent_email.to('mike1@me.com').to('mike2@me.com') }
+
+  it { is_expected.to have_sent_email.with_subject('testing') }
+
+  it { is_expected.to have_sent_email.with_body('hello') }
+
+  # Can match subject or body with a regex
+  # (or anything that responds_to? :match)
+
+  it { is_expected.to have_sent_email.matching_subject(/test(ing)?/) }
+  it { is_expected.to have_sent_email.matching_body(/h(a|e)llo/) }
+
+  # Can chain together modifiers
+  # Note that apart from recipients, repeating a modifier overwrites old value.
+
+  it { is_expected.to have_sent_email.from('you@you.com').to('mike1@me.com').matching_body(/hell/)
+
+  # test for attachments
+
+  # ... by specific attachment
+  it { is_expected.to have_sent_email.with_attachments(my_attachment) }
+
+  # ... or any attachment
+  it { is_expected.to have_sent_email.with_attachments(any_attachment) }
+
+  # ... by array of attachments
+  it { is_expected.to have_sent_email.with_attachments([my_attachment1, my_attachment2]) } #note that order is important
+
+  #... by presence
+  it { is_expected.to have_sent_email.with_any_attachments }
+
+  #... or by absence
+  it { is_expected.to have_sent_email.with_no_attachments }
+
+end
+```
+
+## Excerpts from TREC Spam Corpus 2005
+
+The spec fixture files in spec/fixtures/emails/from_trec_2005 are from the
+2005 TREC Public Spam Corpus. They remain copyrighted under the terms of
+that project and license agreement. They are used in this project to verify
+and describe the development of this email parser implementation.
+
+http://plg.uwaterloo.ca/~gvcormac/treccorpus/
+
+They are used as allowed by 'Permitted Uses, Clause 3':
+
+    "Small excerpts of the information may be displayed to others
+     or published in a scientific or technical context, solely for
+     the purpose of describing the research and development and
+     related issues."
+
+     -- http://plg.uwaterloo.ca/~gvcormac/treccorpus/
+
+## License
+
+(The MIT License)
+
+Copyright (c) 2009-2016 Mikel Lindsaar
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+'Software'), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED 'AS IS', WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.