svix 0.83.1 → 0.84.1

data/lib/svix/models/endpoint_transformation_simulate_out.rb

@@ -3,7 +3,7 @@
 
 #Welcome to the Svix API documentation!  Useful links: [Homepage](https://www.svix.com) | [Support email](mailto:support+docs@svix.com) | [Blog](https://www.svix.com/blog/) | [Slack Community](https://www.svix.com/slack/)  # Introduction  This is the reference documentation and schemas for the [Svix webhook service](https://www.svix.com) API. For tutorials and other documentation please refer to [the documentation](https://docs.svix.com).  ## Main concepts  In Svix you have four important entities you will be interacting with:  - `messages`: these are the webhooks being sent. They can have contents and a few other properties. - `application`: this is where `messages` are sent to. Usually you want to create one application for each user on your platform. - `endpoint`: endpoints are the URLs messages will be sent to. Each application can have multiple `endpoints` and each message sent to that application will be sent to all of them (unless they are not subscribed to the sent event type). - `event-type`: event types are identifiers denoting the type of the message being sent. Event types are primarily used to decide which events are sent to which endpoint.   ## Authentication  Get your authentication token (`AUTH_TOKEN`) from the [Svix dashboard](https://dashboard.svix.com) and use it as part of the `Authorization` header as such: `Authorization: Bearer ${AUTH_TOKEN}`.  <SecurityDefinitions />   ## Code samples  The code samples assume you already have the respective libraries installed and you know how to use them. For the latest information on how to do that, please refer to [the documentation](https://docs.svix.com/).   ## Idempotency  Svix supports [idempotency](https://en.wikipedia.org/wiki/Idempotence) for safely retrying requests without accidentally performing the same operation twice. This is useful when an API call is disrupted in transit and you do not receive a response.  To perform an idempotent request, pass the idempotency key in the `Idempotency-Key` header to the request. The idempotency key should be a unique value generated by the client. You can create the key in however way you like, though we suggest using UUID v4, or any other string with enough entropy to avoid collisions.  Svix's idempotency works by saving the resulting status code and body of the first request made for any given idempotency key for any successful request. Subsequent requests with the same key return the same result.  Please note that idempotency is only supported for `POST` requests.   ## Cross-Origin Resource Sharing  This API features Cross-Origin Resource Sharing (CORS) implemented in compliance with [W3C spec](https://www.w3.org/TR/cors/). And that allows cross-domain communication from the browser. All responses have a wildcard same-origin which makes them completely public and accessible to everyone, including any code on any site. 
 
-The version of the OpenAPI document: 1.4
+The version of the OpenAPI document: 1.4.1
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.0

data/lib/svix/models/endpoint_update.rb

@@ -3,7 +3,7 @@
 
 #Welcome to the Svix API documentation!  Useful links: [Homepage](https://www.svix.com) | [Support email](mailto:support+docs@svix.com) | [Blog](https://www.svix.com/blog/) | [Slack Community](https://www.svix.com/slack/)  # Introduction  This is the reference documentation and schemas for the [Svix webhook service](https://www.svix.com) API. For tutorials and other documentation please refer to [the documentation](https://docs.svix.com).  ## Main concepts  In Svix you have four important entities you will be interacting with:  - `messages`: these are the webhooks being sent. They can have contents and a few other properties. - `application`: this is where `messages` are sent to. Usually you want to create one application for each user on your platform. - `endpoint`: endpoints are the URLs messages will be sent to. Each application can have multiple `endpoints` and each message sent to that application will be sent to all of them (unless they are not subscribed to the sent event type). - `event-type`: event types are identifiers denoting the type of the message being sent. Event types are primarily used to decide which events are sent to which endpoint.   ## Authentication  Get your authentication token (`AUTH_TOKEN`) from the [Svix dashboard](https://dashboard.svix.com) and use it as part of the `Authorization` header as such: `Authorization: Bearer ${AUTH_TOKEN}`.  <SecurityDefinitions />   ## Code samples  The code samples assume you already have the respective libraries installed and you know how to use them. For the latest information on how to do that, please refer to [the documentation](https://docs.svix.com/).   ## Idempotency  Svix supports [idempotency](https://en.wikipedia.org/wiki/Idempotence) for safely retrying requests without accidentally performing the same operation twice. This is useful when an API call is disrupted in transit and you do not receive a response.  To perform an idempotent request, pass the idempotency key in the `Idempotency-Key` header to the request. The idempotency key should be a unique value generated by the client. You can create the key in however way you like, though we suggest using UUID v4, or any other string with enough entropy to avoid collisions.  Svix's idempotency works by saving the resulting status code and body of the first request made for any given idempotency key for any successful request. Subsequent requests with the same key return the same result.  Please note that idempotency is only supported for `POST` requests.   ## Cross-Origin Resource Sharing  This API features Cross-Origin Resource Sharing (CORS) implemented in compliance with [W3C spec](https://www.w3.org/TR/cors/). And that allows cross-domain communication from the browser. All responses have a wildcard same-origin which makes them completely public and accessible to everyone, including any code on any site. 
 
-The version of the OpenAPI document: 1.4
+The version of the OpenAPI document: 1.4.1
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.0
@@ -75,7 +75,6 @@ module Svix
       Set.new([
         :'channels',
         :'filter_types',
-        :'metadata',
         :'rate_limit',
         :'uid',
       ])
@@ -159,10 +158,6 @@ module Svix
         invalid_properties.push('invalid value for "filter_types", number of items must be greater than or equal to 1.')
       end
 
-      if !@rate_limit.nil? && @rate_limit > 65535
-        invalid_properties.push('invalid value for "rate_limit", must be smaller than or equal to 65535.')
-      end
-
       if !@rate_limit.nil? && @rate_limit < 1
         invalid_properties.push('invalid value for "rate_limit", must be greater than or equal to 1.')
       end
@@ -196,6 +191,10 @@ module Svix
         invalid_properties.push('invalid value for "version", version cannot be nil.')
       end
 
+      if @version < 1
+        invalid_properties.push('invalid value for "version", must be greater than or equal to 1.')
+      end
+
       invalid_properties
     end
 
@@ -205,7 +204,6 @@ module Svix
       return false if !@channels.nil? && @channels.length > 10
       return false if !@channels.nil? && @channels.length < 1
       return false if !@filter_types.nil? && @filter_types.length < 1
-      return false if !@rate_limit.nil? && @rate_limit > 65535
       return false if !@rate_limit.nil? && @rate_limit < 1
       return false if !@uid.nil? && @uid.to_s.length > 256
       return false if !@uid.nil? && @uid.to_s.length < 1
@@ -214,6 +212,7 @@ module Svix
       return false if @url.to_s.length > 65536
       return false if @url.to_s.length < 1
       return false if @version.nil?
+      return false if @version < 1
       true
     end
 
@@ -244,10 +243,6 @@ module Svix
     # Custom attribute writer method with validation
     # @param [Object] rate_limit Value to be assigned
     def rate_limit=(rate_limit)
-      if !rate_limit.nil? && rate_limit > 65535
-        fail ArgumentError, 'invalid value for "rate_limit", must be smaller than or equal to 65535.'
-      end
-
       if !rate_limit.nil? && rate_limit < 1
         fail ArgumentError, 'invalid value for "rate_limit", must be greater than or equal to 1.'
       end
@@ -292,6 +287,20 @@ module Svix
       @url = url
     end
 
+    # Custom attribute writer method with validation
+    # @param [Object] version Value to be assigned
+    def version=(version)
+      if version.nil?
+        fail ArgumentError, 'version cannot be nil'
+      end
+
+      if version < 1
+        fail ArgumentError, 'invalid value for "version", must be greater than or equal to 1.'
+      end
+
+      @version = version
+    end
+
     # Checks equality by comparing each attribute.
     # @param [Object] Object to be compared
     def ==(o)

data/lib/svix/models/endpoint_updated_event.rb

@@ -3,7 +3,7 @@
 
 #Welcome to the Svix API documentation!  Useful links: [Homepage](https://www.svix.com) | [Support email](mailto:support+docs@svix.com) | [Blog](https://www.svix.com/blog/) | [Slack Community](https://www.svix.com/slack/)  # Introduction  This is the reference documentation and schemas for the [Svix webhook service](https://www.svix.com) API. For tutorials and other documentation please refer to [the documentation](https://docs.svix.com).  ## Main concepts  In Svix you have four important entities you will be interacting with:  - `messages`: these are the webhooks being sent. They can have contents and a few other properties. - `application`: this is where `messages` are sent to. Usually you want to create one application for each user on your platform. - `endpoint`: endpoints are the URLs messages will be sent to. Each application can have multiple `endpoints` and each message sent to that application will be sent to all of them (unless they are not subscribed to the sent event type). - `event-type`: event types are identifiers denoting the type of the message being sent. Event types are primarily used to decide which events are sent to which endpoint.   ## Authentication  Get your authentication token (`AUTH_TOKEN`) from the [Svix dashboard](https://dashboard.svix.com) and use it as part of the `Authorization` header as such: `Authorization: Bearer ${AUTH_TOKEN}`.  <SecurityDefinitions />   ## Code samples  The code samples assume you already have the respective libraries installed and you know how to use them. For the latest information on how to do that, please refer to [the documentation](https://docs.svix.com/).   ## Idempotency  Svix supports [idempotency](https://en.wikipedia.org/wiki/Idempotence) for safely retrying requests without accidentally performing the same operation twice. This is useful when an API call is disrupted in transit and you do not receive a response.  To perform an idempotent request, pass the idempotency key in the `Idempotency-Key` header to the request. The idempotency key should be a unique value generated by the client. You can create the key in however way you like, though we suggest using UUID v4, or any other string with enough entropy to avoid collisions.  Svix's idempotency works by saving the resulting status code and body of the first request made for any given idempotency key for any successful request. Subsequent requests with the same key return the same result.  Please note that idempotency is only supported for `POST` requests.   ## Cross-Origin Resource Sharing  This API features Cross-Origin Resource Sharing (CORS) implemented in compliance with [W3C spec](https://www.w3.org/TR/cors/). And that allows cross-domain communication from the browser. All responses have a wildcard same-origin which makes them completely public and accessible to everyone, including any code on any site. 
 
-The version of the OpenAPI document: 1.4
+The version of the OpenAPI document: 1.4.1
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.0
@@ -103,6 +103,10 @@ module Svix
         invalid_properties.push('invalid value for "data", data cannot be nil.')
       end
 
+      if @type.nil?
+        invalid_properties.push('invalid value for "type", type cannot be nil.')
+      end
+
       invalid_properties
     end
 
@@ -110,6 +114,7 @@ module Svix
     # @return true if the model is valid
     def valid?
       return false if @data.nil?
+      return false if @type.nil?
       type_validator = EnumAttributeValidator.new('String', ["endpoint.updated"])
       return false unless type_validator.valid?(@type)
       true

data/lib/svix/models/endpoint_updated_event_data.rb

@@ -3,7 +3,7 @@
 
 #Welcome to the Svix API documentation!  Useful links: [Homepage](https://www.svix.com) | [Support email](mailto:support+docs@svix.com) | [Blog](https://www.svix.com/blog/) | [Slack Community](https://www.svix.com/slack/)  # Introduction  This is the reference documentation and schemas for the [Svix webhook service](https://www.svix.com) API. For tutorials and other documentation please refer to [the documentation](https://docs.svix.com).  ## Main concepts  In Svix you have four important entities you will be interacting with:  - `messages`: these are the webhooks being sent. They can have contents and a few other properties. - `application`: this is where `messages` are sent to. Usually you want to create one application for each user on your platform. - `endpoint`: endpoints are the URLs messages will be sent to. Each application can have multiple `endpoints` and each message sent to that application will be sent to all of them (unless they are not subscribed to the sent event type). - `event-type`: event types are identifiers denoting the type of the message being sent. Event types are primarily used to decide which events are sent to which endpoint.   ## Authentication  Get your authentication token (`AUTH_TOKEN`) from the [Svix dashboard](https://dashboard.svix.com) and use it as part of the `Authorization` header as such: `Authorization: Bearer ${AUTH_TOKEN}`.  <SecurityDefinitions />   ## Code samples  The code samples assume you already have the respective libraries installed and you know how to use them. For the latest information on how to do that, please refer to [the documentation](https://docs.svix.com/).   ## Idempotency  Svix supports [idempotency](https://en.wikipedia.org/wiki/Idempotence) for safely retrying requests without accidentally performing the same operation twice. This is useful when an API call is disrupted in transit and you do not receive a response.  To perform an idempotent request, pass the idempotency key in the `Idempotency-Key` header to the request. The idempotency key should be a unique value generated by the client. You can create the key in however way you like, though we suggest using UUID v4, or any other string with enough entropy to avoid collisions.  Svix's idempotency works by saving the resulting status code and body of the first request made for any given idempotency key for any successful request. Subsequent requests with the same key return the same result.  Please note that idempotency is only supported for `POST` requests.   ## Cross-Origin Resource Sharing  This API features Cross-Origin Resource Sharing (CORS) implemented in compliance with [W3C spec](https://www.w3.org/TR/cors/). And that allows cross-domain communication from the browser. All responses have a wildcard same-origin which makes them completely public and accessible to everyone, including any code on any site. 
 
-The version of the OpenAPI document: 1.4
+The version of the OpenAPI document: 1.4.1
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.0
@@ -15,14 +15,16 @@ require 'time'
 
 module Svix
   class EndpointUpdatedEventData
+    # The app's ID
     attr_accessor :app_id
 
-    # Optional unique identifier for the application
+    # The app's UID
     attr_accessor :app_uid
 
+    # The ep's ID
     attr_accessor :endpoint_id
 
-    # Optional unique identifier for the endpoint
+    # The ep's UID
     attr_accessor :endpoint_uid
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/svix/models/environment_in.rb

@@ -3,7 +3,7 @@
 
 #Welcome to the Svix API documentation!  Useful links: [Homepage](https://www.svix.com) | [Support email](mailto:support+docs@svix.com) | [Blog](https://www.svix.com/blog/) | [Slack Community](https://www.svix.com/slack/)  # Introduction  This is the reference documentation and schemas for the [Svix webhook service](https://www.svix.com) API. For tutorials and other documentation please refer to [the documentation](https://docs.svix.com).  ## Main concepts  In Svix you have four important entities you will be interacting with:  - `messages`: these are the webhooks being sent. They can have contents and a few other properties. - `application`: this is where `messages` are sent to. Usually you want to create one application for each user on your platform. - `endpoint`: endpoints are the URLs messages will be sent to. Each application can have multiple `endpoints` and each message sent to that application will be sent to all of them (unless they are not subscribed to the sent event type). - `event-type`: event types are identifiers denoting the type of the message being sent. Event types are primarily used to decide which events are sent to which endpoint.   ## Authentication  Get your authentication token (`AUTH_TOKEN`) from the [Svix dashboard](https://dashboard.svix.com) and use it as part of the `Authorization` header as such: `Authorization: Bearer ${AUTH_TOKEN}`.  <SecurityDefinitions />   ## Code samples  The code samples assume you already have the respective libraries installed and you know how to use them. For the latest information on how to do that, please refer to [the documentation](https://docs.svix.com/).   ## Idempotency  Svix supports [idempotency](https://en.wikipedia.org/wiki/Idempotence) for safely retrying requests without accidentally performing the same operation twice. This is useful when an API call is disrupted in transit and you do not receive a response.  To perform an idempotent request, pass the idempotency key in the `Idempotency-Key` header to the request. The idempotency key should be a unique value generated by the client. You can create the key in however way you like, though we suggest using UUID v4, or any other string with enough entropy to avoid collisions.  Svix's idempotency works by saving the resulting status code and body of the first request made for any given idempotency key for any successful request. Subsequent requests with the same key return the same result.  Please note that idempotency is only supported for `POST` requests.   ## Cross-Origin Resource Sharing  This API features Cross-Origin Resource Sharing (CORS) implemented in compliance with [W3C spec](https://www.w3.org/TR/cors/). And that allows cross-domain communication from the browser. All responses have a wildcard same-origin which makes them completely public and accessible to everyone, including any code on any site. 
 
-The version of the OpenAPI document: 1.4
+The version of the OpenAPI document: 1.4.1
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.0

data/lib/svix/models/environment_out.rb

@@ -3,7 +3,7 @@
 
 #Welcome to the Svix API documentation!  Useful links: [Homepage](https://www.svix.com) | [Support email](mailto:support+docs@svix.com) | [Blog](https://www.svix.com/blog/) | [Slack Community](https://www.svix.com/slack/)  # Introduction  This is the reference documentation and schemas for the [Svix webhook service](https://www.svix.com) API. For tutorials and other documentation please refer to [the documentation](https://docs.svix.com).  ## Main concepts  In Svix you have four important entities you will be interacting with:  - `messages`: these are the webhooks being sent. They can have contents and a few other properties. - `application`: this is where `messages` are sent to. Usually you want to create one application for each user on your platform. - `endpoint`: endpoints are the URLs messages will be sent to. Each application can have multiple `endpoints` and each message sent to that application will be sent to all of them (unless they are not subscribed to the sent event type). - `event-type`: event types are identifiers denoting the type of the message being sent. Event types are primarily used to decide which events are sent to which endpoint.   ## Authentication  Get your authentication token (`AUTH_TOKEN`) from the [Svix dashboard](https://dashboard.svix.com) and use it as part of the `Authorization` header as such: `Authorization: Bearer ${AUTH_TOKEN}`.  <SecurityDefinitions />   ## Code samples  The code samples assume you already have the respective libraries installed and you know how to use them. For the latest information on how to do that, please refer to [the documentation](https://docs.svix.com/).   ## Idempotency  Svix supports [idempotency](https://en.wikipedia.org/wiki/Idempotence) for safely retrying requests without accidentally performing the same operation twice. This is useful when an API call is disrupted in transit and you do not receive a response.  To perform an idempotent request, pass the idempotency key in the `Idempotency-Key` header to the request. The idempotency key should be a unique value generated by the client. You can create the key in however way you like, though we suggest using UUID v4, or any other string with enough entropy to avoid collisions.  Svix's idempotency works by saving the resulting status code and body of the first request made for any given idempotency key for any successful request. Subsequent requests with the same key return the same result.  Please note that idempotency is only supported for `POST` requests.   ## Cross-Origin Resource Sharing  This API features Cross-Origin Resource Sharing (CORS) implemented in compliance with [W3C spec](https://www.w3.org/TR/cors/). And that allows cross-domain communication from the browser. All responses have a wildcard same-origin which makes them completely public and accessible to everyone, including any code on any site. 
 
-The version of the OpenAPI document: 1.4
+The version of the OpenAPI document: 1.4.1
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.0

data/lib/svix/models/environment_settings_out.rb

@@ -3,7 +3,7 @@
 
 #Welcome to the Svix API documentation!  Useful links: [Homepage](https://www.svix.com) | [Support email](mailto:support+docs@svix.com) | [Blog](https://www.svix.com/blog/) | [Slack Community](https://www.svix.com/slack/)  # Introduction  This is the reference documentation and schemas for the [Svix webhook service](https://www.svix.com) API. For tutorials and other documentation please refer to [the documentation](https://docs.svix.com).  ## Main concepts  In Svix you have four important entities you will be interacting with:  - `messages`: these are the webhooks being sent. They can have contents and a few other properties. - `application`: this is where `messages` are sent to. Usually you want to create one application for each user on your platform. - `endpoint`: endpoints are the URLs messages will be sent to. Each application can have multiple `endpoints` and each message sent to that application will be sent to all of them (unless they are not subscribed to the sent event type). - `event-type`: event types are identifiers denoting the type of the message being sent. Event types are primarily used to decide which events are sent to which endpoint.   ## Authentication  Get your authentication token (`AUTH_TOKEN`) from the [Svix dashboard](https://dashboard.svix.com) and use it as part of the `Authorization` header as such: `Authorization: Bearer ${AUTH_TOKEN}`.  <SecurityDefinitions />   ## Code samples  The code samples assume you already have the respective libraries installed and you know how to use them. For the latest information on how to do that, please refer to [the documentation](https://docs.svix.com/).   ## Idempotency  Svix supports [idempotency](https://en.wikipedia.org/wiki/Idempotence) for safely retrying requests without accidentally performing the same operation twice. This is useful when an API call is disrupted in transit and you do not receive a response.  To perform an idempotent request, pass the idempotency key in the `Idempotency-Key` header to the request. The idempotency key should be a unique value generated by the client. You can create the key in however way you like, though we suggest using UUID v4, or any other string with enough entropy to avoid collisions.  Svix's idempotency works by saving the resulting status code and body of the first request made for any given idempotency key for any successful request. Subsequent requests with the same key return the same result.  Please note that idempotency is only supported for `POST` requests.   ## Cross-Origin Resource Sharing  This API features Cross-Origin Resource Sharing (CORS) implemented in compliance with [W3C spec](https://www.w3.org/TR/cors/). And that allows cross-domain communication from the browser. All responses have a wildcard same-origin which makes them completely public and accessible to everyone, including any code on any site. 
 
-The version of the OpenAPI document: 1.4
+The version of the OpenAPI document: 1.4.1
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.0

data/lib/svix/models/event_example_in.rb

@@ -3,7 +3,7 @@
 
 #Welcome to the Svix API documentation!  Useful links: [Homepage](https://www.svix.com) | [Support email](mailto:support+docs@svix.com) | [Blog](https://www.svix.com/blog/) | [Slack Community](https://www.svix.com/slack/)  # Introduction  This is the reference documentation and schemas for the [Svix webhook service](https://www.svix.com) API. For tutorials and other documentation please refer to [the documentation](https://docs.svix.com).  ## Main concepts  In Svix you have four important entities you will be interacting with:  - `messages`: these are the webhooks being sent. They can have contents and a few other properties. - `application`: this is where `messages` are sent to. Usually you want to create one application for each user on your platform. - `endpoint`: endpoints are the URLs messages will be sent to. Each application can have multiple `endpoints` and each message sent to that application will be sent to all of them (unless they are not subscribed to the sent event type). - `event-type`: event types are identifiers denoting the type of the message being sent. Event types are primarily used to decide which events are sent to which endpoint.   ## Authentication  Get your authentication token (`AUTH_TOKEN`) from the [Svix dashboard](https://dashboard.svix.com) and use it as part of the `Authorization` header as such: `Authorization: Bearer ${AUTH_TOKEN}`.  <SecurityDefinitions />   ## Code samples  The code samples assume you already have the respective libraries installed and you know how to use them. For the latest information on how to do that, please refer to [the documentation](https://docs.svix.com/).   ## Idempotency  Svix supports [idempotency](https://en.wikipedia.org/wiki/Idempotence) for safely retrying requests without accidentally performing the same operation twice. This is useful when an API call is disrupted in transit and you do not receive a response.  To perform an idempotent request, pass the idempotency key in the `Idempotency-Key` header to the request. The idempotency key should be a unique value generated by the client. You can create the key in however way you like, though we suggest using UUID v4, or any other string with enough entropy to avoid collisions.  Svix's idempotency works by saving the resulting status code and body of the first request made for any given idempotency key for any successful request. Subsequent requests with the same key return the same result.  Please note that idempotency is only supported for `POST` requests.   ## Cross-Origin Resource Sharing  This API features Cross-Origin Resource Sharing (CORS) implemented in compliance with [W3C spec](https://www.w3.org/TR/cors/). And that allows cross-domain communication from the browser. All responses have a wildcard same-origin which makes them completely public and accessible to everyone, including any code on any site. 
 
-The version of the OpenAPI document: 1.4
+The version of the OpenAPI document: 1.4.1
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.0
@@ -15,6 +15,7 @@ require 'time'
 
 module Svix
   class EventExampleIn
+    # The event type's name
     attr_accessor :event_type
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/svix/models/event_type_example_out.rb

@@ -3,7 +3,7 @@
 
 #Welcome to the Svix API documentation!  Useful links: [Homepage](https://www.svix.com) | [Support email](mailto:support+docs@svix.com) | [Blog](https://www.svix.com/blog/) | [Slack Community](https://www.svix.com/slack/)  # Introduction  This is the reference documentation and schemas for the [Svix webhook service](https://www.svix.com) API. For tutorials and other documentation please refer to [the documentation](https://docs.svix.com).  ## Main concepts  In Svix you have four important entities you will be interacting with:  - `messages`: these are the webhooks being sent. They can have contents and a few other properties. - `application`: this is where `messages` are sent to. Usually you want to create one application for each user on your platform. - `endpoint`: endpoints are the URLs messages will be sent to. Each application can have multiple `endpoints` and each message sent to that application will be sent to all of them (unless they are not subscribed to the sent event type). - `event-type`: event types are identifiers denoting the type of the message being sent. Event types are primarily used to decide which events are sent to which endpoint.   ## Authentication  Get your authentication token (`AUTH_TOKEN`) from the [Svix dashboard](https://dashboard.svix.com) and use it as part of the `Authorization` header as such: `Authorization: Bearer ${AUTH_TOKEN}`.  <SecurityDefinitions />   ## Code samples  The code samples assume you already have the respective libraries installed and you know how to use them. For the latest information on how to do that, please refer to [the documentation](https://docs.svix.com/).   ## Idempotency  Svix supports [idempotency](https://en.wikipedia.org/wiki/Idempotence) for safely retrying requests without accidentally performing the same operation twice. This is useful when an API call is disrupted in transit and you do not receive a response.  To perform an idempotent request, pass the idempotency key in the `Idempotency-Key` header to the request. The idempotency key should be a unique value generated by the client. You can create the key in however way you like, though we suggest using UUID v4, or any other string with enough entropy to avoid collisions.  Svix's idempotency works by saving the resulting status code and body of the first request made for any given idempotency key for any successful request. Subsequent requests with the same key return the same result.  Please note that idempotency is only supported for `POST` requests.   ## Cross-Origin Resource Sharing  This API features Cross-Origin Resource Sharing (CORS) implemented in compliance with [W3C spec](https://www.w3.org/TR/cors/). And that allows cross-domain communication from the browser. All responses have a wildcard same-origin which makes them completely public and accessible to everyone, including any code on any site. 
 
-The version of the OpenAPI document: 1.4
+The version of the OpenAPI document: 1.4.1
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.0
@@ -32,7 +32,7 @@ module Svix
     # Attribute type mapping.
     def self.openapi_types
       {
-        :'example' => :'Object'
+        :'example' => :'Hash<String, Object>'
       }
     end
 
@@ -58,7 +58,9 @@ module Svix
       }
 
       if attributes.key?(:'example')
-        self.example = attributes[:'example']
+        if (value = attributes[:'example']).is_a?(Hash)
+          self.example = value
+        end
       end
     end
 

data/lib/svix/models/event_type_in.rb

@@ -3,7 +3,7 @@
 
 #Welcome to the Svix API documentation!  Useful links: [Homepage](https://www.svix.com) | [Support email](mailto:support+docs@svix.com) | [Blog](https://www.svix.com/blog/) | [Slack Community](https://www.svix.com/slack/)  # Introduction  This is the reference documentation and schemas for the [Svix webhook service](https://www.svix.com) API. For tutorials and other documentation please refer to [the documentation](https://docs.svix.com).  ## Main concepts  In Svix you have four important entities you will be interacting with:  - `messages`: these are the webhooks being sent. They can have contents and a few other properties. - `application`: this is where `messages` are sent to. Usually you want to create one application for each user on your platform. - `endpoint`: endpoints are the URLs messages will be sent to. Each application can have multiple `endpoints` and each message sent to that application will be sent to all of them (unless they are not subscribed to the sent event type). - `event-type`: event types are identifiers denoting the type of the message being sent. Event types are primarily used to decide which events are sent to which endpoint.   ## Authentication  Get your authentication token (`AUTH_TOKEN`) from the [Svix dashboard](https://dashboard.svix.com) and use it as part of the `Authorization` header as such: `Authorization: Bearer ${AUTH_TOKEN}`.  <SecurityDefinitions />   ## Code samples  The code samples assume you already have the respective libraries installed and you know how to use them. For the latest information on how to do that, please refer to [the documentation](https://docs.svix.com/).   ## Idempotency  Svix supports [idempotency](https://en.wikipedia.org/wiki/Idempotence) for safely retrying requests without accidentally performing the same operation twice. This is useful when an API call is disrupted in transit and you do not receive a response.  To perform an idempotent request, pass the idempotency key in the `Idempotency-Key` header to the request. The idempotency key should be a unique value generated by the client. You can create the key in however way you like, though we suggest using UUID v4, or any other string with enough entropy to avoid collisions.  Svix's idempotency works by saving the resulting status code and body of the first request made for any given idempotency key for any successful request. Subsequent requests with the same key return the same result.  Please note that idempotency is only supported for `POST` requests.   ## Cross-Origin Resource Sharing  This API features Cross-Origin Resource Sharing (CORS) implemented in compliance with [W3C spec](https://www.w3.org/TR/cors/). And that allows cross-domain communication from the browser. All responses have a wildcard same-origin which makes them completely public and accessible to everyone, including any code on any site. 
 
-The version of the OpenAPI document: 1.4
+The version of the OpenAPI document: 1.4.1
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.0
@@ -21,6 +21,7 @@ module Svix
 
     attr_accessor :feature_flag
 
+    # The event type's name
     attr_accessor :name
 
     # The schema for the event type for a specific version as a JSON schema.

data/lib/svix/models/event_type_out.rb

@@ -3,7 +3,7 @@
 
 #Welcome to the Svix API documentation!  Useful links: [Homepage](https://www.svix.com) | [Support email](mailto:support+docs@svix.com) | [Blog](https://www.svix.com/blog/) | [Slack Community](https://www.svix.com/slack/)  # Introduction  This is the reference documentation and schemas for the [Svix webhook service](https://www.svix.com) API. For tutorials and other documentation please refer to [the documentation](https://docs.svix.com).  ## Main concepts  In Svix you have four important entities you will be interacting with:  - `messages`: these are the webhooks being sent. They can have contents and a few other properties. - `application`: this is where `messages` are sent to. Usually you want to create one application for each user on your platform. - `endpoint`: endpoints are the URLs messages will be sent to. Each application can have multiple `endpoints` and each message sent to that application will be sent to all of them (unless they are not subscribed to the sent event type). - `event-type`: event types are identifiers denoting the type of the message being sent. Event types are primarily used to decide which events are sent to which endpoint.   ## Authentication  Get your authentication token (`AUTH_TOKEN`) from the [Svix dashboard](https://dashboard.svix.com) and use it as part of the `Authorization` header as such: `Authorization: Bearer ${AUTH_TOKEN}`.  <SecurityDefinitions />   ## Code samples  The code samples assume you already have the respective libraries installed and you know how to use them. For the latest information on how to do that, please refer to [the documentation](https://docs.svix.com/).   ## Idempotency  Svix supports [idempotency](https://en.wikipedia.org/wiki/Idempotence) for safely retrying requests without accidentally performing the same operation twice. This is useful when an API call is disrupted in transit and you do not receive a response.  To perform an idempotent request, pass the idempotency key in the `Idempotency-Key` header to the request. The idempotency key should be a unique value generated by the client. You can create the key in however way you like, though we suggest using UUID v4, or any other string with enough entropy to avoid collisions.  Svix's idempotency works by saving the resulting status code and body of the first request made for any given idempotency key for any successful request. Subsequent requests with the same key return the same result.  Please note that idempotency is only supported for `POST` requests.   ## Cross-Origin Resource Sharing  This API features Cross-Origin Resource Sharing (CORS) implemented in compliance with [W3C spec](https://www.w3.org/TR/cors/). And that allows cross-domain communication from the browser. All responses have a wildcard same-origin which makes them completely public and accessible to everyone, including any code on any site. 
 
-The version of the OpenAPI document: 1.4
+The version of the OpenAPI document: 1.4.1
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.0
@@ -23,6 +23,7 @@ module Svix
 
     attr_accessor :feature_flag
 
+    # The event type's name
     attr_accessor :name
 
     # The schema for the event type for a specific version as a JSON schema.

data/lib/svix/models/event_type_patch.rb

@@ -0,0 +1,275 @@
+=begin
+#Svix API
+
+#Welcome to the Svix API documentation!  Useful links: [Homepage](https://www.svix.com) | [Support email](mailto:support+docs@svix.com) | [Blog](https://www.svix.com/blog/) | [Slack Community](https://www.svix.com/slack/)  # Introduction  This is the reference documentation and schemas for the [Svix webhook service](https://www.svix.com) API. For tutorials and other documentation please refer to [the documentation](https://docs.svix.com).  ## Main concepts  In Svix you have four important entities you will be interacting with:  - `messages`: these are the webhooks being sent. They can have contents and a few other properties. - `application`: this is where `messages` are sent to. Usually you want to create one application for each user on your platform. - `endpoint`: endpoints are the URLs messages will be sent to. Each application can have multiple `endpoints` and each message sent to that application will be sent to all of them (unless they are not subscribed to the sent event type). - `event-type`: event types are identifiers denoting the type of the message being sent. Event types are primarily used to decide which events are sent to which endpoint.   ## Authentication  Get your authentication token (`AUTH_TOKEN`) from the [Svix dashboard](https://dashboard.svix.com) and use it as part of the `Authorization` header as such: `Authorization: Bearer ${AUTH_TOKEN}`.  <SecurityDefinitions />   ## Code samples  The code samples assume you already have the respective libraries installed and you know how to use them. For the latest information on how to do that, please refer to [the documentation](https://docs.svix.com/).   ## Idempotency  Svix supports [idempotency](https://en.wikipedia.org/wiki/Idempotence) for safely retrying requests without accidentally performing the same operation twice. This is useful when an API call is disrupted in transit and you do not receive a response.  To perform an idempotent request, pass the idempotency key in the `Idempotency-Key` header to the request. The idempotency key should be a unique value generated by the client. You can create the key in however way you like, though we suggest using UUID v4, or any other string with enough entropy to avoid collisions.  Svix's idempotency works by saving the resulting status code and body of the first request made for any given idempotency key for any successful request. Subsequent requests with the same key return the same result.  Please note that idempotency is only supported for `POST` requests.   ## Cross-Origin Resource Sharing  This API features Cross-Origin Resource Sharing (CORS) implemented in compliance with [W3C spec](https://www.w3.org/TR/cors/). And that allows cross-domain communication from the browser. All responses have a wildcard same-origin which makes them completely public and accessible to everyone, including any code on any site. 
+
+The version of the OpenAPI document: 1.4.1
+
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.2.0
+
+=end
+
+require 'date'
+require 'time'
+
+module Svix
+  class EventTypePatch
+    attr_accessor :archived
+
+    attr_accessor :description
+
+    attr_accessor :feature_flag
+
+    attr_accessor :schemas
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'archived' => :'archived',
+        :'description' => :'description',
+        :'feature_flag' => :'featureFlag',
+        :'schemas' => :'schemas'
+      }
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'archived' => :'Boolean',
+        :'description' => :'String',
+        :'feature_flag' => :'String',
+        :'schemas' => :'Hash<String, Object>'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+        :'feature_flag',
+        :'schemas'
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `Svix::EventTypePatch` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!self.class.attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `Svix::EventTypePatch`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'archived')
+        self.archived = attributes[:'archived']
+      end
+
+      if attributes.key?(:'description')
+        self.description = attributes[:'description']
+      end
+
+      if attributes.key?(:'feature_flag')
+        self.feature_flag = attributes[:'feature_flag']
+      end
+
+      if attributes.key?(:'schemas')
+        if (value = attributes[:'schemas']).is_a?(Hash)
+          self.schemas = value
+        end
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      if !@feature_flag.nil? && @feature_flag.to_s.length > 256
+        invalid_properties.push('invalid value for "feature_flag", the character length must be smaller than or equal to 256.')
+      end
+
+      pattern = Regexp.new(/^[a-zA-Z0-9\-_.]+$/)
+      if !@feature_flag.nil? && @feature_flag !~ pattern
+        invalid_properties.push("invalid value for \"feature_flag\", must conform to the pattern #{pattern}.")
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      return false if !@feature_flag.nil? && @feature_flag.to_s.length > 256
+      return false if !@feature_flag.nil? && @feature_flag !~ Regexp.new(/^[a-zA-Z0-9\-_.]+$/)
+      true
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] feature_flag Value to be assigned
+    def feature_flag=(feature_flag)
+      if !feature_flag.nil? && feature_flag.to_s.length > 256
+        fail ArgumentError, 'invalid value for "feature_flag", the character length must be smaller than or equal to 256.'
+      end
+
+      pattern = Regexp.new(/^[a-zA-Z0-9\-_.]+$/)
+      if !feature_flag.nil? && feature_flag !~ pattern
+        fail ArgumentError, "invalid value for \"feature_flag\", must conform to the pattern #{pattern}."
+      end
+
+      @feature_flag = feature_flag
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          archived == o.archived &&
+          description == o.description &&
+          feature_flag == o.feature_flag &&
+          schemas == o.schemas
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [archived, description, feature_flag, schemas].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      new.build_from_hash(attributes)
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.openapi_types.each_pair do |key, type|
+        if attributes[self.class.attribute_map[key]].nil? && self.class.openapi_nullable.include?(key)
+          self.send("#{key}=", nil)
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :Time
+        Time.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :Boolean
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        # models (e.g. Pet) or oneOf
+        klass = Svix.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end

data/lib/svix/models/event_type_schema_in.rb

@@ -3,7 +3,7 @@
 
 #Welcome to the Svix API documentation!  Useful links: [Homepage](https://www.svix.com) | [Support email](mailto:support+docs@svix.com) | [Blog](https://www.svix.com/blog/) | [Slack Community](https://www.svix.com/slack/)  # Introduction  This is the reference documentation and schemas for the [Svix webhook service](https://www.svix.com) API. For tutorials and other documentation please refer to [the documentation](https://docs.svix.com).  ## Main concepts  In Svix you have four important entities you will be interacting with:  - `messages`: these are the webhooks being sent. They can have contents and a few other properties. - `application`: this is where `messages` are sent to. Usually you want to create one application for each user on your platform. - `endpoint`: endpoints are the URLs messages will be sent to. Each application can have multiple `endpoints` and each message sent to that application will be sent to all of them (unless they are not subscribed to the sent event type). - `event-type`: event types are identifiers denoting the type of the message being sent. Event types are primarily used to decide which events are sent to which endpoint.   ## Authentication  Get your authentication token (`AUTH_TOKEN`) from the [Svix dashboard](https://dashboard.svix.com) and use it as part of the `Authorization` header as such: `Authorization: Bearer ${AUTH_TOKEN}`.  <SecurityDefinitions />   ## Code samples  The code samples assume you already have the respective libraries installed and you know how to use them. For the latest information on how to do that, please refer to [the documentation](https://docs.svix.com/).   ## Idempotency  Svix supports [idempotency](https://en.wikipedia.org/wiki/Idempotence) for safely retrying requests without accidentally performing the same operation twice. This is useful when an API call is disrupted in transit and you do not receive a response.  To perform an idempotent request, pass the idempotency key in the `Idempotency-Key` header to the request. The idempotency key should be a unique value generated by the client. You can create the key in however way you like, though we suggest using UUID v4, or any other string with enough entropy to avoid collisions.  Svix's idempotency works by saving the resulting status code and body of the first request made for any given idempotency key for any successful request. Subsequent requests with the same key return the same result.  Please note that idempotency is only supported for `POST` requests.   ## Cross-Origin Resource Sharing  This API features Cross-Origin Resource Sharing (CORS) implemented in compliance with [W3C spec](https://www.w3.org/TR/cors/). And that allows cross-domain communication from the browser. All responses have a wildcard same-origin which makes them completely public and accessible to everyone, including any code on any site. 
 
-The version of the OpenAPI document: 1.4
+The version of the OpenAPI document: 1.4.1
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.0
@@ -15,7 +15,6 @@ require 'time'
 
 module Svix
   class EventTypeSchemaIn
-    # The schema for an event type
     attr_accessor :schema
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/svix/models/event_type_update.rb

@@ -3,7 +3,7 @@
 
 #Welcome to the Svix API documentation!  Useful links: [Homepage](https://www.svix.com) | [Support email](mailto:support+docs@svix.com) | [Blog](https://www.svix.com/blog/) | [Slack Community](https://www.svix.com/slack/)  # Introduction  This is the reference documentation and schemas for the [Svix webhook service](https://www.svix.com) API. For tutorials and other documentation please refer to [the documentation](https://docs.svix.com).  ## Main concepts  In Svix you have four important entities you will be interacting with:  - `messages`: these are the webhooks being sent. They can have contents and a few other properties. - `application`: this is where `messages` are sent to. Usually you want to create one application for each user on your platform. - `endpoint`: endpoints are the URLs messages will be sent to. Each application can have multiple `endpoints` and each message sent to that application will be sent to all of them (unless they are not subscribed to the sent event type). - `event-type`: event types are identifiers denoting the type of the message being sent. Event types are primarily used to decide which events are sent to which endpoint.   ## Authentication  Get your authentication token (`AUTH_TOKEN`) from the [Svix dashboard](https://dashboard.svix.com) and use it as part of the `Authorization` header as such: `Authorization: Bearer ${AUTH_TOKEN}`.  <SecurityDefinitions />   ## Code samples  The code samples assume you already have the respective libraries installed and you know how to use them. For the latest information on how to do that, please refer to [the documentation](https://docs.svix.com/).   ## Idempotency  Svix supports [idempotency](https://en.wikipedia.org/wiki/Idempotence) for safely retrying requests without accidentally performing the same operation twice. This is useful when an API call is disrupted in transit and you do not receive a response.  To perform an idempotent request, pass the idempotency key in the `Idempotency-Key` header to the request. The idempotency key should be a unique value generated by the client. You can create the key in however way you like, though we suggest using UUID v4, or any other string with enough entropy to avoid collisions.  Svix's idempotency works by saving the resulting status code and body of the first request made for any given idempotency key for any successful request. Subsequent requests with the same key return the same result.  Please note that idempotency is only supported for `POST` requests.   ## Cross-Origin Resource Sharing  This API features Cross-Origin Resource Sharing (CORS) implemented in compliance with [W3C spec](https://www.w3.org/TR/cors/). And that allows cross-domain communication from the browser. All responses have a wildcard same-origin which makes them completely public and accessible to everyone, including any code on any site. 
 
-The version of the OpenAPI document: 1.4
+The version of the OpenAPI document: 1.4.1
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.0

data/lib/svix/models/font_size_config.rb

@@ -3,7 +3,7 @@
 
 #Welcome to the Svix API documentation!  Useful links: [Homepage](https://www.svix.com) | [Support email](mailto:support+docs@svix.com) | [Blog](https://www.svix.com/blog/) | [Slack Community](https://www.svix.com/slack/)  # Introduction  This is the reference documentation and schemas for the [Svix webhook service](https://www.svix.com) API. For tutorials and other documentation please refer to [the documentation](https://docs.svix.com).  ## Main concepts  In Svix you have four important entities you will be interacting with:  - `messages`: these are the webhooks being sent. They can have contents and a few other properties. - `application`: this is where `messages` are sent to. Usually you want to create one application for each user on your platform. - `endpoint`: endpoints are the URLs messages will be sent to. Each application can have multiple `endpoints` and each message sent to that application will be sent to all of them (unless they are not subscribed to the sent event type). - `event-type`: event types are identifiers denoting the type of the message being sent. Event types are primarily used to decide which events are sent to which endpoint.   ## Authentication  Get your authentication token (`AUTH_TOKEN`) from the [Svix dashboard](https://dashboard.svix.com) and use it as part of the `Authorization` header as such: `Authorization: Bearer ${AUTH_TOKEN}`.  <SecurityDefinitions />   ## Code samples  The code samples assume you already have the respective libraries installed and you know how to use them. For the latest information on how to do that, please refer to [the documentation](https://docs.svix.com/).   ## Idempotency  Svix supports [idempotency](https://en.wikipedia.org/wiki/Idempotence) for safely retrying requests without accidentally performing the same operation twice. This is useful when an API call is disrupted in transit and you do not receive a response.  To perform an idempotent request, pass the idempotency key in the `Idempotency-Key` header to the request. The idempotency key should be a unique value generated by the client. You can create the key in however way you like, though we suggest using UUID v4, or any other string with enough entropy to avoid collisions.  Svix's idempotency works by saving the resulting status code and body of the first request made for any given idempotency key for any successful request. Subsequent requests with the same key return the same result.  Please note that idempotency is only supported for `POST` requests.   ## Cross-Origin Resource Sharing  This API features Cross-Origin Resource Sharing (CORS) implemented in compliance with [W3C spec](https://www.w3.org/TR/cors/). And that allows cross-domain communication from the browser. All responses have a wildcard same-origin which makes them completely public and accessible to everyone, including any code on any site. 
 
-The version of the OpenAPI document: 1.4
+The version of the OpenAPI document: 1.4.1
 
 Generated by: https://openapi-generator.tech
 OpenAPI Generator version: 5.2.0