supply_drop 0.5.0 → 0.6.0

data/examples/vendored-puppet/vendor/puppet-2.7.8/lib/puppet/util/windows/security.rb

@@ -0,0 +1,657 @@
+# This class maps POSIX owner, group, and modes to the Windows
+# security model, and back.
+#
+# The primary goal of this mapping is to ensure that owner, group, and
+# modes can be round-tripped in a consistent and deterministic
+# way. Otherwise, Puppet might think file resources are out-of-sync
+# every time it runs. A secondary goal is to provide equivalent
+# permissions for common use-cases. For example, setting the owner to
+# "Administrators", group to "Users", and mode to 750 (which also
+# denies access to everyone else.
+#
+# There are some well-known problems mapping windows and POSIX
+# permissions due to differences between the two security
+# models. Search for "POSIX permission mapping leak". In POSIX, access
+# to a file is determined solely based on the most specific class
+# (user, group, other). So a mode of 460 would deny write access to
+# the owner even if they are a member of the group. But in Windows,
+# the entire access control list is walked until the user is
+# explicitly denied or allowed (denied take precedence, and if neither
+# occurs they are denied). As a result, a user could be allowed access
+# based on their group membership. To solve this problem, other people
+# have used deny access control entries to more closely model POSIX,
+# but this introduces a lot of complexity.
+#
+# In general, this implementation only supports "typical" permissions,
+# where group permissions are a subset of user, and other permissions
+# are a subset of group, e.g. 754, but not 467.  However, there are
+# some Windows quirks to be aware of.
+#
+# * The owner can be either a user or group SID, and most system files
+#   are owned by the Administrators group.
+# * The group can be either a user or group SID.
+# * Unexpected results can occur if the owner and group are the
+#   same, but the user and group classes are different, e.g. 750. In
+#   this case, it is not possible to allow write access to the owner,
+#   but not the group. As a result, the actual permissions set on the
+#   file would be 770.
+# * In general, only privileged users can set the owner, group, or
+#   change the mode for files they do not own. In 2003, the user must
+#   be a member of the Administrators group. In Vista/2008, the user
+#   must be running with elevated privileges.
+# * A file/dir can be deleted by anyone with the DELETE access right
+#   OR by anyone that has the FILE_DELETE_CHILD access right for the
+#   parent. See http://support.microsoft.com/kb/238018. But on Unix,
+#   the user must have write access to the file/dir AND execute access
+#   to all of the parent path components.
+# * Many access control entries are inherited from parent directories,
+#   and it is common for file/dirs to have more than 3 entries,
+#   e.g. Users, Power Users, Administrators, SYSTEM, etc, which cannot
+#   be mapped into the 3 class POSIX model. The get_mode method will
+#   set the S_IEXTRA bit flag indicating that an access control entry
+#   was found whose SID is neither the owner, group, or other. This
+#   enables Puppet to detect when file/dirs are out-of-sync,
+#   especially those that Puppet did not create, but is attempting
+#   to manage.
+# * On Unix, the owner and group can be modified without changing the
+#   mode. But on Windows, an access control entry specifies which SID
+#   it applies to. As a result, the set_owner and set_group methods
+#   automatically rebuild the access control list based on the new
+#   (and different) owner or group.
+
+require 'puppet/util/windows'
+require 'pathname'
+
+require 'win32/security'
+
+require 'windows/file'
+require 'windows/handle'
+require 'windows/security'
+require 'windows/process'
+require 'windows/memory'
+require 'windows/volume'
+
+module Puppet::Util::Windows::Security
+  include Windows::File
+  include Windows::Handle
+  include Windows::Security
+  include Windows::Process
+  include Windows::Memory
+  include Windows::MSVCRT::Buffer
+  include Windows::Volume
+
+  extend Puppet::Util::Windows::Security
+
+  # file modes
+  S_IRUSR = 0000400
+  S_IRGRP = 0000040
+  S_IROTH = 0000004
+  S_IWUSR = 0000200
+  S_IWGRP = 0000020
+  S_IWOTH = 0000002
+  S_IXUSR = 0000100
+  S_IXGRP = 0000010
+  S_IXOTH = 0000001
+  S_IRWXU = 0000700
+  S_IRWXG = 0000070
+  S_IRWXO = 0000007
+  S_ISVTX = 0001000
+  S_IEXTRA = 02000000  # represents an extra ace
+
+  # constants that are missing from Windows::Security
+  PROTECTED_DACL_SECURITY_INFORMATION   = 0x80000000
+  UNPROTECTED_DACL_SECURITY_INFORMATION = 0x20000000
+  NO_INHERITANCE = 0x0
+
+  # Set the owner of the object referenced by +path+ to the specified
+  # +owner_sid+.  The owner sid should be of the form "S-1-5-32-544"
+  # and can either be a user or group.  Only a user with the
+  # SE_RESTORE_NAME privilege in their process token can overwrite the
+  # object's owner to something other than the current user.
+  def set_owner(owner_sid, path)
+    old_sid = get_owner(path)
+
+    change_sid(old_sid, owner_sid, OWNER_SECURITY_INFORMATION, path)
+  end
+
+  # Get the owner of the object referenced by +path+.  The returned
+  # value is a SID string, e.g. "S-1-5-32-544".  Any user with read
+  # access to an object can get the owner. Only a user with the
+  # SE_BACKUP_NAME privilege in their process token can get the owner
+  # for objects they do not have read access to.
+  def get_owner(path)
+    return unless supports_acl?(path)
+
+    get_sid(OWNER_SECURITY_INFORMATION, path)
+  end
+
+  # Set the owner of the object referenced by +path+ to the specified
+  # +group_sid+.  The group sid should be of the form "S-1-5-32-544"
+  # and can either be a user or group.  Any user with WRITE_OWNER
+  # access to the object can change the group (regardless of whether
+  # the current user belongs to that group or not).
+  def set_group(group_sid, path)
+    old_sid = get_group(path)
+
+    change_sid(old_sid, group_sid, GROUP_SECURITY_INFORMATION, path)
+  end
+
+  # Get the group of the object referenced by +path+.  The returned
+  # value is a SID string, e.g. "S-1-5-32-544".  Any user with read
+  # access to an object can get the group. Only a user with the
+  # SE_BACKUP_NAME privilege in their process token can get the group
+  # for objects they do not have read access to.
+  def get_group(path)
+    return unless supports_acl?(path)
+
+    get_sid(GROUP_SECURITY_INFORMATION, path)
+  end
+
+  def supports_acl?(path)
+    flags = 0.chr * 4
+
+    root = Pathname.new(path).enum_for(:ascend).to_a.last.to_s
+    # 'A trailing backslash is required'
+    root = "#{root}\\" unless root =~ /[\/\\]$/
+    unless GetVolumeInformation(root, nil, 0, nil, nil, flags, nil, 0)
+      raise Puppet::Util::Windows::Error.new("Failed to get volume information")
+    end
+
+    (flags.unpack('L')[0] & Windows::File::FILE_PERSISTENT_ACLS) != 0
+  end
+
+  def change_sid(old_sid, new_sid, info, path)
+    if old_sid != new_sid
+      mode = get_mode(path)
+
+      string_to_sid_ptr(new_sid) do |psid|
+        with_privilege(SE_RESTORE_NAME) do
+          open_file(path, WRITE_OWNER) do |handle|
+            set_security_info(handle, info, psid)
+          end
+        end
+      end
+
+      # rebuild dacl now that sid has changed
+      set_mode(mode, path)
+    end
+  end
+
+  def get_sid(info, path)
+    with_privilege(SE_BACKUP_NAME) do
+      open_file(path, READ_CONTROL) do |handle|
+        get_security_info(handle, info)
+      end
+    end
+  end
+
+  def get_attributes(path)
+    attributes = GetFileAttributes(path)
+
+    raise Puppet::Util::Windows::Error.new("Failed to get file attributes") if attributes == INVALID_FILE_ATTRIBUTES
+
+    attributes
+  end
+
+  def add_attributes(path, flags)
+    oldattrs = get_attributes(path)
+
+    if (oldattrs | flags) != oldattrs
+      set_attributes(path, oldattrs | flags)
+    end
+  end
+
+  def remove_attributes(path, flags)
+    oldattrs = get_attributes(path)
+
+    if (oldattrs & ~flags) != oldattrs
+      set_attributes(path, oldattrs & ~flags)
+    end
+  end
+
+  def set_attributes(path, flags)
+    raise Puppet::Util::Windows::Error.new("Failed to set file attributes") unless SetFileAttributes(path, flags)
+  end
+
+  MASK_TO_MODE = {
+    FILE_GENERIC_READ => S_IROTH,
+    FILE_GENERIC_WRITE => S_IWOTH,
+    (FILE_GENERIC_EXECUTE & ~FILE_READ_ATTRIBUTES) => S_IXOTH
+  }
+
+  # Get the mode of the object referenced by +path+.  The returned
+  # integer value represents the POSIX-style read, write, and execute
+  # modes for the user, group, and other classes, e.g. 0640.  Any user
+  # with read access to an object can get the mode. Only a user with
+  # the SE_BACKUP_NAME privilege in their process token can get the
+  # mode for objects they do not have read access to.
+  def get_mode(path)
+    return unless supports_acl?(path)
+
+    owner_sid = get_owner(path)
+    group_sid = get_group(path)
+    well_known_world_sid = Win32::Security::SID::Everyone
+    well_known_nobody_sid = Win32::Security::SID::Nobody
+
+    with_privilege(SE_BACKUP_NAME) do
+      open_file(path, READ_CONTROL) do |handle|
+        mode = 0
+
+        get_dacl(handle).each do |ace|
+          case ace[:sid]
+          when owner_sid
+            MASK_TO_MODE.each_pair do |k,v|
+              if (ace[:mask] & k) == k
+                mode |= (v << 6)
+              end
+            end
+          when group_sid
+            MASK_TO_MODE.each_pair do |k,v|
+              if (ace[:mask] & k) == k
+                mode |= (v << 3)
+              end
+            end
+          when well_known_world_sid
+            MASK_TO_MODE.each_pair do |k,v|
+              if (ace[:mask] & k) == k
+                mode |= (v << 6) | (v << 3) | v
+              end
+            end
+            if File.directory?(path) and (ace[:mask] & (FILE_WRITE_DATA | FILE_EXECUTE | FILE_DELETE_CHILD)) == (FILE_WRITE_DATA | FILE_EXECUTE)
+              mode |= S_ISVTX;
+            end
+          when well_known_nobody_sid
+            if (ace[:mask] & FILE_APPEND_DATA).nonzero?
+              mode |= S_ISVTX
+            end
+          else
+            #puts "Warning, unable to map SID into POSIX mode: #{ace[:sid]}"
+            mode |= S_IEXTRA
+          end
+
+          # if owner and group the same, then user and group modes are the OR of both
+          if owner_sid == group_sid
+            mode |= ((mode & S_IRWXG) << 3) | ((mode & S_IRWXU) >> 3)
+            #puts "owner: #{group_sid}, 0x#{ace[:mask].to_s(16)}, #{mode.to_s(8)}"
+          end
+        end
+
+        #puts "get_mode: #{mode.to_s(8)}"
+        mode
+      end
+    end
+  end
+
+  MODE_TO_MASK = {
+    S_IROTH => FILE_GENERIC_READ,
+    S_IWOTH => FILE_GENERIC_WRITE,
+    S_IXOTH => (FILE_GENERIC_EXECUTE & ~FILE_READ_ATTRIBUTES),
+  }
+
+  # Set the mode of the object referenced by +path+ to the specified
+  # +mode+.  The mode should be specified as POSIX-stye read, write,
+  # and execute modes for the user, group, and other classes,
+  # e.g. 0640. The sticky bit, S_ISVTX, is supported, but is only
+  # meaningful for directories. If set, group and others are not
+  # allowed to delete child objects for which they are not the owner.
+  # By default, the DACL is set to protected, meaning it does not
+  # inherit access control entries from parent objects. This can be
+  # changed by setting +protected+ to false. The owner of the object
+  # (with READ_CONTROL and WRITE_DACL access) can always change the
+  # mode. Only a user with the SE_BACKUP_NAME and SE_RESTORE_NAME
+  # privileges in their process token can change the mode for objects
+  # that they do not have read and write access to.
+  def set_mode(mode, path, protected = true)
+    owner_sid = get_owner(path)
+    group_sid = get_group(path)
+    well_known_world_sid = Win32::Security::SID::Everyone
+    well_known_nobody_sid = Win32::Security::SID::Nobody
+
+    owner_allow = STANDARD_RIGHTS_ALL  | FILE_READ_ATTRIBUTES | FILE_WRITE_ATTRIBUTES
+    group_allow = STANDARD_RIGHTS_READ | FILE_READ_ATTRIBUTES | SYNCHRONIZE
+    other_allow = STANDARD_RIGHTS_READ | FILE_READ_ATTRIBUTES | SYNCHRONIZE
+    nobody_allow = 0
+
+    MODE_TO_MASK.each do |k,v|
+      if ((mode >> 6) & k) == k
+        owner_allow |= v
+      end
+      if ((mode >> 3) & k) == k
+        group_allow |= v
+      end
+      if (mode & k) == k
+        other_allow |= v
+      end
+    end
+
+    if (mode & S_ISVTX).nonzero?
+      nobody_allow |= FILE_APPEND_DATA;
+    end
+
+    isdir = File.directory?(path)
+
+    if isdir
+      if (mode & (S_IWUSR | S_IXUSR)) == (S_IWUSR | S_IXUSR)
+        owner_allow |= FILE_DELETE_CHILD
+      end
+      if (mode & (S_IWGRP | S_IXGRP)) == (S_IWGRP | S_IXGRP) and (mode & S_ISVTX) == 0
+        group_allow |= FILE_DELETE_CHILD
+      end
+      if (mode & (S_IWOTH | S_IXOTH)) == (S_IWOTH | S_IXOTH) and (mode & S_ISVTX) == 0
+        other_allow |= FILE_DELETE_CHILD
+      end
+    end
+
+    # if owner and group the same, then map group permissions to the one owner ACE
+    isownergroup = owner_sid == group_sid
+    if isownergroup
+      owner_allow |= group_allow
+    end
+
+    # if any ACE allows write, then clear readonly bit, but do this before we overwrite
+    # the DACl and lose our ability to set the attribute
+    if ((owner_allow | group_allow | other_allow ) & FILE_WRITE_DATA) == FILE_WRITE_DATA
+      remove_attributes(path, FILE_ATTRIBUTE_READONLY)
+    end
+
+    set_acl(path, protected) do |acl|
+      #puts "ace: owner #{owner_sid}, mask 0x#{owner_allow.to_s(16)}"
+      add_access_allowed_ace(acl, owner_allow, owner_sid)
+
+      unless isownergroup
+        #puts "ace: group #{group_sid}, mask 0x#{group_allow.to_s(16)}"
+        add_access_allowed_ace(acl, group_allow, group_sid)
+      end
+
+      #puts "ace: other #{well_known_world_sid}, mask 0x#{other_allow.to_s(16)}"
+      add_access_allowed_ace(acl, other_allow, well_known_world_sid)
+
+      #puts "ace: nobody #{well_known_nobody_sid}, mask 0x#{nobody_allow.to_s(16)}"
+      add_access_allowed_ace(acl, nobody_allow, well_known_nobody_sid)
+
+      # add inheritable aces for child dirs and files that are created within the dir
+      if isdir
+        inherit = INHERIT_ONLY_ACE | OBJECT_INHERIT_ACE | CONTAINER_INHERIT_ACE
+
+        add_access_allowed_ace(acl, owner_allow, Win32::Security::SID::CreatorOwner, inherit)
+        add_access_allowed_ace(acl, group_allow, Win32::Security::SID::CreatorGroup, inherit)
+        add_access_allowed_ace(acl, other_allow, well_known_world_sid, inherit)
+      end
+    end
+
+    nil
+  end
+
+  # setting DACL requires both READ_CONTROL and WRITE_DACL access rights,
+  # and their respective privileges, SE_BACKUP_NAME and SE_RESTORE_NAME.
+  def set_acl(path, protected = true)
+    with_privilege(SE_BACKUP_NAME) do
+      with_privilege(SE_RESTORE_NAME) do
+        open_file(path, READ_CONTROL | WRITE_DAC) do |handle|
+          acl = 0.chr * 1024 # This can be increased later as needed
+
+          unless InitializeAcl(acl, acl.size, ACL_REVISION)
+            raise Puppet::Util::Windows::Error.new("Failed to initialize ACL")
+          end
+
+          raise Puppet::Util::Windows::Error.new("Invalid DACL") unless IsValidAcl(acl)
+
+          yield acl
+
+          # protected means the object does not inherit aces from its parent
+          info = DACL_SECURITY_INFORMATION
+          info |= protected ? PROTECTED_DACL_SECURITY_INFORMATION : UNPROTECTED_DACL_SECURITY_INFORMATION
+
+          # set the DACL
+          set_security_info(handle, info, acl)
+        end
+      end
+    end
+  end
+
+  def add_access_allowed_ace(acl, mask, sid, inherit = NO_INHERITANCE)
+    string_to_sid_ptr(sid) do |sid_ptr|
+      raise Puppet::Util::Windows::Error.new("Invalid SID") unless IsValidSid(sid_ptr)
+
+      unless AddAccessAllowedAceEx(acl, ACL_REVISION, inherit, mask, sid_ptr)
+        raise Puppet::Util::Windows::Error.new("Failed to add access control entry")
+      end
+    end
+  end
+
+  def add_access_denied_ace(acl, mask, sid)
+    string_to_sid_ptr(sid) do |sid_ptr|
+      raise Puppet::Util::Windows::Error.new("Invalid SID") unless IsValidSid(sid_ptr)
+
+      unless AddAccessDeniedAce(acl, ACL_REVISION, mask, sid_ptr)
+        raise Puppet::Util::Windows::Error.new("Failed to add access control entry")
+      end
+    end
+  end
+
+  def get_dacl(handle)
+    get_dacl_ptr(handle) do |dacl_ptr|
+      # REMIND: need to handle NULL DACL
+      raise Puppet::Util::Windows::Error.new("Invalid DACL") unless IsValidAcl(dacl_ptr)
+
+      # ACL structure, size and count are the important parts. The
+      # size includes both the ACL structure and all the ACEs.
+      #
+      # BYTE AclRevision
+      # BYTE Padding1
+      # WORD AclSize
+      # WORD AceCount
+      # WORD Padding2
+      acl_buf = 0.chr * 8
+      memcpy(acl_buf, dacl_ptr, acl_buf.size)
+      ace_count = acl_buf.unpack('CCSSS')[3]
+
+      dacl = []
+
+      # deny all
+      return dacl if ace_count == 0
+
+      0.upto(ace_count - 1) do |i|
+        ace_ptr = [0].pack('L')
+
+        next unless GetAce(dacl_ptr, i, ace_ptr)
+
+        # ACE structures vary depending on the type. All structures
+        # begin with an ACE header, which specifies the type, flags
+        # and size of what follows. We are only concerned with
+        # ACCESS_ALLOWED_ACE and ACCESS_DENIED_ACEs, which have the
+        # same structure:
+        #
+        # BYTE  C AceType
+        # BYTE  C AceFlags
+        # WORD  S AceSize
+        # DWORD L ACCESS_MASK
+        # DWORD L Sid
+        # ..      ...
+        # DWORD L Sid
+
+        ace_buf = 0.chr * 8
+        memcpy(ace_buf, ace_ptr.unpack('L')[0], ace_buf.size)
+
+        ace_type, ace_flags, size, mask = ace_buf.unpack('CCSL')
+
+        # skip aces that only serve to propagate inheritance
+        next if (ace_flags & INHERIT_ONLY_ACE).nonzero?
+
+        case ace_type
+        when ACCESS_ALLOWED_ACE_TYPE
+          sid_ptr = ace_ptr.unpack('L')[0] + 8 # address of ace_ptr->SidStart
+          raise Puppet::Util::Windows::Error.new("Failed to read DACL, invalid SID") unless IsValidSid(sid_ptr)
+          sid = sid_ptr_to_string(sid_ptr)
+          dacl << {:sid => sid, :type => ace_type, :mask => mask}
+        else
+          Puppet.warning "Unsupported access control entry type: 0x#{ace_type.to_s(16)}"
+        end
+      end
+
+      dacl
+    end
+  end
+
+  def get_dacl_ptr(handle)
+    dacl = [0].pack('L')
+    sd = [0].pack('L')
+
+    rv = GetSecurityInfo(
+         handle,
+         SE_FILE_OBJECT,
+         DACL_SECURITY_INFORMATION,
+         nil,
+         nil,
+         dacl, #dacl
+         nil, #sacl
+         sd) #sec desc
+    raise Puppet::Util::Windows::Error.new("Failed to get DACL") unless rv == ERROR_SUCCESS
+    begin
+      yield dacl.unpack('L')[0]
+    ensure
+      LocalFree(sd.unpack('L')[0])
+    end
+  end
+
+  # Set the security info on the specified handle.
+  def set_security_info(handle, info, ptr)
+    rv = SetSecurityInfo(
+         handle,
+         SE_FILE_OBJECT,
+         info,
+         (info & OWNER_SECURITY_INFORMATION) == OWNER_SECURITY_INFORMATION ? ptr : nil,
+         (info & GROUP_SECURITY_INFORMATION) == GROUP_SECURITY_INFORMATION ? ptr : nil,
+         (info & DACL_SECURITY_INFORMATION) == DACL_SECURITY_INFORMATION ? ptr : nil,
+         nil)
+    raise Puppet::Util::Windows::Error.new("Failed to set security information") unless rv == ERROR_SUCCESS
+  end
+
+  # Get the SID string, e.g. "S-1-5-32-544", for the specified handle
+  # and type of information (owner, group).
+  def get_security_info(handle, info)
+    sid = [0].pack('L')
+    sd = [0].pack('L')
+
+    rv = GetSecurityInfo(
+         handle,
+         SE_FILE_OBJECT,
+         info, # security info
+         info == OWNER_SECURITY_INFORMATION ? sid : nil,
+         info == GROUP_SECURITY_INFORMATION ? sid : nil,
+         nil, #dacl
+         nil, #sacl
+         sd) #sec desc
+    raise Puppet::Util::Windows::Error.new("Failed to get security information") unless rv == ERROR_SUCCESS
+
+    begin
+      return sid_ptr_to_string(sid.unpack('L')[0])
+    ensure
+      LocalFree(sd.unpack('L')[0])
+    end
+  end
+
+  # Convert a SID pointer to a string, e.g. "S-1-5-32-544".
+  def sid_ptr_to_string(psid)
+    sid_buf = 0.chr * 256
+    str_ptr = 0.chr * 4
+
+    raise Puppet::Util::Windows::Error.new("Invalid SID") unless IsValidSid(psid)
+
+    raise Puppet::Util::Windows::Error.new("Failed to convert binary SID") unless ConvertSidToStringSid(psid, str_ptr)
+
+    begin
+      strncpy(sid_buf, str_ptr.unpack('L')[0], sid_buf.size - 1)
+      sid_buf[sid_buf.size - 1] = 0.chr
+      return sid_buf.strip
+    ensure
+      LocalFree(str_ptr.unpack('L')[0])
+    end
+  end
+
+  # Convert a SID string, e.g. "S-1-5-32-544" to a pointer (containing the
+  # address of the binary SID structure). The returned value can be used in
+  # Win32 APIs that expect a PSID, e.g. IsValidSid.
+  def string_to_sid_ptr(string)
+    sid_buf = 0.chr * 80
+    string_addr = [string].pack('p*').unpack('L')[0]
+
+    raise Puppet::Util::Windows::Error.new("Failed to convert string SID: #{string}") unless ConvertStringSidToSid(string_addr, sid_buf)
+
+    sid_ptr = sid_buf.unpack('L')[0]
+    begin
+      if block_given?
+        yield sid_ptr
+      else
+        true
+      end
+    ensure
+      LocalFree(sid_ptr)
+    end
+  end
+
+  # Open an existing file with the specified access mode, and execute a
+  # block with the opened file HANDLE.
+  def open_file(path, access)
+    handle = CreateFile(
+             path,
+             access,
+             FILE_SHARE_READ | FILE_SHARE_WRITE,
+             0, # security_attributes
+             OPEN_EXISTING,
+             FILE_FLAG_BACKUP_SEMANTICS,
+             0) # template
+    raise Puppet::Util::Windows::Error.new("Failed to open '#{path}'") if handle == INVALID_HANDLE_VALUE
+    begin
+      yield handle
+    ensure
+      CloseHandle(handle)
+    end
+  end
+
+  # Execute a block with the specified privilege enabled
+  def with_privilege(privilege)
+    set_privilege(privilege, true)
+    yield
+  ensure
+    set_privilege(privilege, false)
+  end
+
+  # Enable or disable a privilege. Note this doesn't add any privileges the
+  # user doesn't already has, it just enables privileges that are disabled.
+  def set_privilege(privilege, enable)
+    return unless Puppet.features.root?
+
+    with_process_token(TOKEN_ADJUST_PRIVILEGES | TOKEN_QUERY) do |token|
+      tmpLuid = 0.chr * 8
+
+      # Get the LUID for specified privilege.
+      unless LookupPrivilegeValue("", privilege, tmpLuid)
+        raise Puppet::Util::Windows::Error.new("Failed to lookup privilege")
+      end
+
+      # DWORD + [LUID + DWORD]
+      tkp = [1].pack('L') + tmpLuid + [enable ? SE_PRIVILEGE_ENABLED : 0].pack('L')
+
+      unless AdjustTokenPrivileges(token, 0, tkp, tkp.length , nil, nil)
+        raise Puppet::Util::Windows::Error.new("Failed to adjust process privileges")
+      end
+    end
+  end
+
+  # Execute a block with the current process token
+  def with_process_token(access)
+    token = 0.chr * 4
+
+    unless OpenProcessToken(GetCurrentProcess(), access, token)
+      raise Puppet::Util::Windows::Error.new("Failed to open process token")
+    end
+    begin
+      token = token.unpack('L')[0]
+
+      yield token
+    ensure
+      CloseHandle(token)
+    end
+  end
+end

data/examples/vendored-puppet/vendor/puppet-2.7.8/lib/puppet/util/windows.rb

@@ -0,0 +1,4 @@
+module Puppet::Util::Windows
+  require 'puppet/util/windows/error'
+  require 'puppet/util/windows/security'
+end