subskribe_dev2 1.3.2

data/docs/SettingsApi.md

@@ -0,0 +1,1415 @@
+# SubskribeDevClient::SettingsApi
+
+All URIs are relative to *https://api.app.subskribe.com*
+
+Method | HTTP request | Description
+------------- | ------------- | -------------
+[**activate_unit_of_measure**](SettingsApi.md#activate_unit_of_measure) | **POST** /unitsOfMeasure/{id}/activate | Activate unit of measure
+[**add_tax_rate**](SettingsApi.md#add_tax_rate) | **POST** /taxrates | Add tax rate
+[**add_term_section**](SettingsApi.md#add_term_section) | **POST** /termsections | Add predefined terms section
+[**add_unit_of_measure**](SettingsApi.md#add_unit_of_measure) | **POST** /unitsOfMeasure | Add unit of measure
+[**delete_tax_rate**](SettingsApi.md#delete_tax_rate) | **DELETE** /taxrates/{id} | Delete tax rate
+[**delete_term_section**](SettingsApi.md#delete_term_section) | **DELETE** /termsections/{id} | Delete predefined terms section
+[**delete_unit_of_measure**](SettingsApi.md#delete_unit_of_measure) | **DELETE** /unitsOfMeasure/{id} | Delete unit of measure
+[**deprecate_unit_of_measure**](SettingsApi.md#deprecate_unit_of_measure) | **POST** /unitsOfMeasure/{id}/deprecate | Deprecate unit of measure
+[**get_payment_term_settings**](SettingsApi.md#get_payment_term_settings) | **GET** /settings/paymentTerms | Get payment term settings
+[**get_supported_currencies**](SettingsApi.md#get_supported_currencies) | **GET** /settings/supportedCurrencies | Get supported currencies
+[**get_tax_rate**](SettingsApi.md#get_tax_rate) | **GET** /taxrates/{id} | Get tax rate by Id
+[**get_tax_rates**](SettingsApi.md#get_tax_rates) | **GET** /taxrates | Get tax rates
+[**get_tenant**](SettingsApi.md#get_tenant) | **GET** /tenants | Get tenant details
+[**get_tenant_logo**](SettingsApi.md#get_tenant_logo) | **GET** /tenants/logo | Get tenant logo
+[**get_tenant_setting**](SettingsApi.md#get_tenant_setting) | **GET** /settings | Get tenant settings
+[**get_term_section**](SettingsApi.md#get_term_section) | **GET** /termsections/{id} | Get predefined terms section detail
+[**get_term_sections**](SettingsApi.md#get_term_sections) | **GET** /termsections | Get predefined terms sections
+[**get_units_of_measure**](SettingsApi.md#get_units_of_measure) | **GET** /unitsOfMeasure | Get units of measure
+[**update_payment_term_settings**](SettingsApi.md#update_payment_term_settings) | **PUT** /settings/paymentTerms | Update payment term settings
+[**update_supported_currencies**](SettingsApi.md#update_supported_currencies) | **PUT** /settings/supportedCurrencies | Update supported currencies
+[**update_tax_rate**](SettingsApi.md#update_tax_rate) | **PUT** /taxrates/{id} | Update tax rate
+[**update_tenant**](SettingsApi.md#update_tenant) | **PUT** /tenants | Update tenant details
+[**update_tenant_setting**](SettingsApi.md#update_tenant_setting) | **PUT** /settings | Update tenant settings
+[**update_term_section**](SettingsApi.md#update_term_section) | **PUT** /termsections/{id} | Update predefined terms section
+[**update_unit_of_measure**](SettingsApi.md#update_unit_of_measure) | **PUT** /unitsOfMeasure/{id} | Update unit of measure
+[**upload_tenant_logo**](SettingsApi.md#upload_tenant_logo) | **PUT** /tenants/logo | Update tenant logo
+
+
+# **activate_unit_of_measure**
+> activate_unit_of_measure(id)
+
+Activate unit of measure
+
+Activates the specified unit of measure making it available to be attached to charges
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+id = 'id_example' # String | 
+
+
+begin
+  #Activate unit of measure
+  api_instance.activate_unit_of_measure(id)
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->activate_unit_of_measure: #{e}"
+end
+```
+
+### Parameters
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **id** | [**String**](.md)|  | 
+
+### Return type
+
+nil (empty response body)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: application/json
+
+
+
+# **add_tax_rate**
+> TaxRateJson add_tax_rate(opts)
+
+Add tax rate
+
+Add a new tax rate object
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+opts = { 
+  body: SubskribeDevClient::TaxRateJson.new # TaxRateJson | 
+}
+
+begin
+  #Add tax rate
+  result = api_instance.add_tax_rate(opts)
+  p result
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->add_tax_rate: #{e}"
+end
+```
+
+### Parameters
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **body** | [**TaxRateJson**](TaxRateJson.md)|  | [optional] 
+
+### Return type
+
+[**TaxRateJson**](TaxRateJson.md)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: application/json
+ - **Accept**: application/json
+
+
+
+# **add_term_section**
+> DocumentSection add_term_section(opts)
+
+Add predefined terms section
+
+Adds a predefined terms section.
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+opts = { 
+  body: SubskribeDevClient::DocumentSection.new # DocumentSection | 
+}
+
+begin
+  #Add predefined terms section
+  result = api_instance.add_term_section(opts)
+  p result
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->add_term_section: #{e}"
+end
+```
+
+### Parameters
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **body** | [**DocumentSection**](DocumentSection.md)|  | [optional] 
+
+### Return type
+
+[**DocumentSection**](DocumentSection.md)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: application/json
+
+
+
+# **add_unit_of_measure**
+> UnitOfMeasureJson add_unit_of_measure(opts)
+
+Add unit of measure
+
+Add a new instance of unit of measure as specified by the input
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+opts = { 
+  body: SubskribeDevClient::UnitOfMeasureJson.new # UnitOfMeasureJson | 
+}
+
+begin
+  #Add unit of measure
+  result = api_instance.add_unit_of_measure(opts)
+  p result
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->add_unit_of_measure: #{e}"
+end
+```
+
+### Parameters
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **body** | [**UnitOfMeasureJson**](UnitOfMeasureJson.md)|  | [optional] 
+
+### Return type
+
+[**UnitOfMeasureJson**](UnitOfMeasureJson.md)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: application/json
+ - **Accept**: application/json
+
+
+
+# **delete_tax_rate**
+> TaxRateJson delete_tax_rate(id)
+
+Delete tax rate
+
+Deletes the tax rate object by Id. If successful the deleted tax rate object is returned
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+id = 'id_example' # String | 
+
+
+begin
+  #Delete tax rate
+  result = api_instance.delete_tax_rate(id)
+  p result
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->delete_tax_rate: #{e}"
+end
+```
+
+### Parameters
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **id** | [**String**](.md)|  | 
+
+### Return type
+
+[**TaxRateJson**](TaxRateJson.md)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: application/json
+
+
+
+# **delete_term_section**
+> delete_term_section(id)
+
+Delete predefined terms section
+
+Deletes the predefined terms section specified.
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+id = 'id_example' # String | 
+
+
+begin
+  #Delete predefined terms section
+  api_instance.delete_term_section(id)
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->delete_term_section: #{e}"
+end
+```
+
+### Parameters
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **id** | **String**|  | 
+
+### Return type
+
+nil (empty response body)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: application/json
+
+
+
+# **delete_unit_of_measure**
+> UnitOfMeasureJson delete_unit_of_measure(id)
+
+Delete unit of measure
+
+Delete the unit of measure by Id provided. Returns the deleted unit of measure object if successful.
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+id = 'id_example' # String | 
+
+
+begin
+  #Delete unit of measure
+  result = api_instance.delete_unit_of_measure(id)
+  p result
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->delete_unit_of_measure: #{e}"
+end
+```
+
+### Parameters
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **id** | [**String**](.md)|  | 
+
+### Return type
+
+[**UnitOfMeasureJson**](UnitOfMeasureJson.md)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: application/json
+
+
+
+# **deprecate_unit_of_measure**
+> deprecate_unit_of_measure(id)
+
+Deprecate unit of measure
+
+Deprecates the specified unit of measure making it unavailable to be attached to charges going forward
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+id = 'id_example' # String | 
+
+
+begin
+  #Deprecate unit of measure
+  api_instance.deprecate_unit_of_measure(id)
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->deprecate_unit_of_measure: #{e}"
+end
+```
+
+### Parameters
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **id** | [**String**](.md)|  | 
+
+### Return type
+
+nil (empty response body)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: application/json
+
+
+
+# **get_payment_term_settings**
+> get_payment_term_settings
+
+Get payment term settings
+
+
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+begin
+  #Get payment term settings
+  api_instance.get_payment_term_settings
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->get_payment_term_settings: #{e}"
+end
+```
+
+### Parameters
+This endpoint does not need any parameter.
+
+### Return type
+
+nil (empty response body)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: application/json
+
+
+
+# **get_supported_currencies**
+> get_supported_currencies
+
+Get supported currencies
+
+Get supported currencies for your tenant
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+begin
+  #Get supported currencies
+  api_instance.get_supported_currencies
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->get_supported_currencies: #{e}"
+end
+```
+
+### Parameters
+This endpoint does not need any parameter.
+
+### Return type
+
+nil (empty response body)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: application/json
+
+
+
+# **get_tax_rate**
+> TaxRatePaginationResponseJson get_tax_rate(id)
+
+Get tax rate by Id
+
+Retrieves the tax rate object by Id
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+id = 'id_example' # String | 
+
+
+begin
+  #Get tax rate by Id
+  result = api_instance.get_tax_rate(id)
+  p result
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->get_tax_rate: #{e}"
+end
+```
+
+### Parameters
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **id** | [**String**](.md)|  | 
+
+### Return type
+
+[**TaxRatePaginationResponseJson**](TaxRatePaginationResponseJson.md)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: application/json
+
+
+
+# **get_tax_rates**
+> TaxRatePaginationResponseJson get_tax_rates(opts)
+
+Get tax rates
+
+Get all available tax rates. The result is paginated. To retrieve all results pass the cursor returned from a call to the next call until all results are returned.
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+opts = { 
+  cursor: 'cursor_example', # String | 
+  limit: 56 # Integer | 
+}
+
+begin
+  #Get tax rates
+  result = api_instance.get_tax_rates(opts)
+  p result
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->get_tax_rates: #{e}"
+end
+```
+
+### Parameters
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **cursor** | [**String**](.md)|  | [optional] 
+ **limit** | **Integer**|  | [optional] 
+
+### Return type
+
+[**TaxRatePaginationResponseJson**](TaxRatePaginationResponseJson.md)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: application/json
+
+
+
+# **get_tenant**
+> TenantJson get_tenant
+
+Get tenant details
+
+Get the details of the current tenant
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+begin
+  #Get tenant details
+  result = api_instance.get_tenant
+  p result
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->get_tenant: #{e}"
+end
+```
+
+### Parameters
+This endpoint does not need any parameter.
+
+### Return type
+
+[**TenantJson**](TenantJson.md)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: application/json
+
+
+
+# **get_tenant_logo**
+> get_tenant_logo
+
+Get tenant logo
+
+Get the current logo stored
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+begin
+  #Get tenant logo
+  api_instance.get_tenant_logo
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->get_tenant_logo: #{e}"
+end
+```
+
+### Parameters
+This endpoint does not need any parameter.
+
+### Return type
+
+nil (empty response body)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: image/png, application/json
+
+
+
+# **get_tenant_setting**
+> TenantSettingJson get_tenant_setting
+
+Get tenant settings
+
+Returns all tenant settings for your tenant.
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+begin
+  #Get tenant settings
+  result = api_instance.get_tenant_setting
+  p result
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->get_tenant_setting: #{e}"
+end
+```
+
+### Parameters
+This endpoint does not need any parameter.
+
+### Return type
+
+[**TenantSettingJson**](TenantSettingJson.md)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: application/json
+
+
+
+# **get_term_section**
+> DocumentSection get_term_section(id)
+
+Get predefined terms section detail
+
+Returns predefined terms section detail.
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+id = 'id_example' # String | 
+
+
+begin
+  #Get predefined terms section detail
+  result = api_instance.get_term_section(id)
+  p result
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->get_term_section: #{e}"
+end
+```
+
+### Parameters
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **id** | **String**|  | 
+
+### Return type
+
+[**DocumentSection**](DocumentSection.md)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: application/json
+
+
+
+# **get_term_sections**
+> DocumentSection get_term_sections
+
+Get predefined terms sections
+
+Returns predefined terms sections.
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+begin
+  #Get predefined terms sections
+  result = api_instance.get_term_sections
+  p result
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->get_term_sections: #{e}"
+end
+```
+
+### Parameters
+This endpoint does not need any parameter.
+
+### Return type
+
+[**DocumentSection**](DocumentSection.md)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: application/json
+
+
+
+# **get_units_of_measure**
+> UnitOfMeasurePaginationResponseJson get_units_of_measure(opts)
+
+Get units of measure
+
+Returns a paginated list of units of measure
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+opts = { 
+  cursor: 'cursor_example', # String | 
+  limit: 56 # Integer | 
+}
+
+begin
+  #Get units of measure
+  result = api_instance.get_units_of_measure(opts)
+  p result
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->get_units_of_measure: #{e}"
+end
+```
+
+### Parameters
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **cursor** | [**String**](.md)|  | [optional] 
+ **limit** | **Integer**|  | [optional] 
+
+### Return type
+
+[**UnitOfMeasurePaginationResponseJson**](UnitOfMeasurePaginationResponseJson.md)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: application/json
+
+
+
+# **update_payment_term_settings**
+> update_payment_term_settings(body)
+
+Update payment term settings
+
+
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+body = SubskribeDevClient::PaymentTermSettingsJson.new # PaymentTermSettingsJson | json representation of the payment term settings
+
+
+begin
+  #Update payment term settings
+  api_instance.update_payment_term_settings(body)
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->update_payment_term_settings: #{e}"
+end
+```
+
+### Parameters
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **body** | [**PaymentTermSettingsJson**](PaymentTermSettingsJson.md)| json representation of the payment term settings | 
+
+### Return type
+
+nil (empty response body)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: application/json
+
+
+
+# **update_supported_currencies**
+> update_supported_currencies(opts)
+
+Update supported currencies
+
+Update supported currencies for your tenant
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+opts = { 
+  body: [SubskribeDevClient::Array<String>.new] # Array<String> | 
+}
+
+begin
+  #Update supported currencies
+  api_instance.update_supported_currencies(opts)
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->update_supported_currencies: #{e}"
+end
+```
+
+### Parameters
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **body** | **Array&lt;String&gt;**|  | [optional] 
+
+### Return type
+
+nil (empty response body)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: application/json
+
+
+
+# **update_tax_rate**
+> update_tax_rate(id, opts)
+
+Update tax rate
+
+Updates the specific tax rate object
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+id = 'id_example' # String | 
+
+opts = { 
+  body: SubskribeDevClient::TaxRateJson.new # TaxRateJson | 
+}
+
+begin
+  #Update tax rate
+  api_instance.update_tax_rate(id, opts)
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->update_tax_rate: #{e}"
+end
+```
+
+### Parameters
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **id** | [**String**](.md)|  | 
+ **body** | [**TaxRateJson**](TaxRateJson.md)|  | [optional] 
+
+### Return type
+
+nil (empty response body)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: application/json
+ - **Accept**: application/json
+
+
+
+# **update_tenant**
+> update_tenant(opts)
+
+Update tenant details
+
+Updates the details of the current tenant based on the input
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+opts = { 
+  body: SubskribeDevClient::TenantJson.new # TenantJson | 
+}
+
+begin
+  #Update tenant details
+  api_instance.update_tenant(opts)
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->update_tenant: #{e}"
+end
+```
+
+### Parameters
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **body** | [**TenantJson**](TenantJson.md)|  | [optional] 
+
+### Return type
+
+nil (empty response body)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: application/json
+ - **Accept**: application/json
+
+
+
+# **update_tenant_setting**
+> update_tenant_setting(body)
+
+Update tenant settings
+
+Updates settings for your tenant.
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+body = SubskribeDevClient::TenantSettingJson.new # TenantSettingJson | json representation of the settings
+
+
+begin
+  #Update tenant settings
+  api_instance.update_tenant_setting(body)
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->update_tenant_setting: #{e}"
+end
+```
+
+### Parameters
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **body** | [**TenantSettingJson**](TenantSettingJson.md)| json representation of the settings | 
+
+### Return type
+
+nil (empty response body)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: application/json
+
+
+
+# **update_term_section**
+> DocumentSection update_term_section(id, opts)
+
+Update predefined terms section
+
+Updates the predefined terms section specified.
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+id = 'id_example' # String | 
+
+opts = { 
+  body: SubskribeDevClient::DocumentSection.new # DocumentSection | 
+}
+
+begin
+  #Update predefined terms section
+  result = api_instance.update_term_section(id, opts)
+  p result
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->update_term_section: #{e}"
+end
+```
+
+### Parameters
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **id** | **String**|  | 
+ **body** | [**DocumentSection**](DocumentSection.md)|  | [optional] 
+
+### Return type
+
+[**DocumentSection**](DocumentSection.md)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: application/json
+
+
+
+# **update_unit_of_measure**
+> UnitOfMeasureJson update_unit_of_measure(id, opts)
+
+Update unit of measure
+
+Update the unit of measure by Id provided.
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+id = 'id_example' # String | 
+
+opts = { 
+  body: SubskribeDevClient::UnitOfMeasureJson.new # UnitOfMeasureJson | 
+}
+
+begin
+  #Update unit of measure
+  result = api_instance.update_unit_of_measure(id, opts)
+  p result
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->update_unit_of_measure: #{e}"
+end
+```
+
+### Parameters
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **id** | [**String**](.md)|  | 
+ **body** | [**UnitOfMeasureJson**](UnitOfMeasureJson.md)|  | [optional] 
+
+### Return type
+
+[**UnitOfMeasureJson**](UnitOfMeasureJson.md)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: Not defined
+ - **Accept**: application/json
+
+
+
+# **upload_tenant_logo**
+> TenantJson upload_tenant_logo(opts)
+
+Update tenant logo
+
+Updates the logo used in external facing communication such as order forms and invoices
+
+### Example
+```ruby
+# load the gem
+require 'subskribe_dev2'
+# setup authorization
+SubskribeDevClient.configure do |config|
+  # Configure API key authorization: ApiKeyAuth
+  config.api_key['X-API-Key'] = 'YOUR API KEY'
+  # Uncomment the following line to set a prefix for the API key, e.g. 'Bearer' (defaults to nil)
+  #config.api_key_prefix['X-API-Key'] = 'Bearer'
+end
+
+api_instance = SubskribeDevClient::SettingsApi.new
+
+opts = { 
+  file: File.new('/path/to/file.txt') # File | 
+}
+
+begin
+  #Update tenant logo
+  result = api_instance.upload_tenant_logo(opts)
+  p result
+rescue SubskribeDevClient::ApiError => e
+  puts "Exception when calling SettingsApi->upload_tenant_logo: #{e}"
+end
+```
+
+### Parameters
+
+Name | Type | Description  | Notes
+------------- | ------------- | ------------- | -------------
+ **file** | **File**|  | [optional] 
+
+### Return type
+
+[**TenantJson**](TenantJson.md)
+
+### Authorization
+
+[ApiKeyAuth](../README.md#ApiKeyAuth)
+
+### HTTP request headers
+
+ - **Content-Type**: multipart/form-data
+ - **Accept**: application/json
+
+
+