stripe 18.3.0.pre.alpha.1 → 18.3.0

data/lib/stripe/params/v2/money_management/inbound_transfer_list_params.rb

@@ -1,44 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module MoneyManagement
-      class InboundTransferListParams < ::Stripe::RequestParams
-        # Filter for objects created at the specified timestamp.
-        # Must be an RFC 3339 date & time value, for example: 2022-09-18T13:22:00Z.
-        attr_accessor :created
-        # Filter for objects created after the specified timestamp.
-        # Must be an RFC 3339 date & time value, for example: 2022-09-18T13:22:00Z.
-        attr_accessor :created_gt
-        # Filter for objects created on or after the specified timestamp.
-        # Must be an RFC 3339 date & time value, for example: 2022-09-18T13:22:00Z.
-        attr_accessor :created_gte
-        # Filter for objects created before the specified timestamp.
-        # Must be an RFC 3339 date & time value, for example: 2022-09-18T13:22:00Z.
-        attr_accessor :created_lt
-        # Filter for objects created on or before the specified timestamp.
-        # Must be an RFC 3339 date & time value, for example: 2022-09-18T13:22:00Z.
-        attr_accessor :created_lte
-        # The page limit.
-        attr_accessor :limit
-
-        def initialize(
-          created: nil,
-          created_gt: nil,
-          created_gte: nil,
-          created_lt: nil,
-          created_lte: nil,
-          limit: nil
-        )
-          @created = created
-          @created_gt = created_gt
-          @created_gte = created_gte
-          @created_lt = created_lt
-          @created_lte = created_lte
-          @limit = limit
-        end
-      end
-    end
-  end
-end

data/lib/stripe/params/v2/money_management/inbound_transfer_retrieve_params.rb

@@ -1,10 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module MoneyManagement
-      class InboundTransferRetrieveParams < ::Stripe::RequestParams; end
-    end
-  end
-end

data/lib/stripe/params/v2/money_management/outbound_payment_cancel_params.rb

@@ -1,10 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module MoneyManagement
-      class OutboundPaymentCancelParams < ::Stripe::RequestParams; end
-    end
-  end
-end

data/lib/stripe/params/v2/money_management/outbound_payment_create_params.rb

@@ -1,134 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module MoneyManagement
-      class OutboundPaymentCreateParams < ::Stripe::RequestParams
-        class Amount < ::Stripe::RequestParams
-          # A non-negative integer representing how much to charge in the [smallest currency unit](https://docs.stripe.com/currencies#minor-units).
-          attr_accessor :value
-          # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
-          attr_accessor :currency
-
-          def initialize(value: nil, currency: nil)
-            @value = value
-            @currency = currency
-          end
-        end
-
-        class DeliveryOptions < ::Stripe::RequestParams
-          class PaperCheck < ::Stripe::RequestParams
-            # Memo printed on the memo field of the check.
-            attr_accessor :memo
-            # Open Enum. Shipping speed of the paper check. Defaults to standard.
-            attr_accessor :shipping_speed
-            # Signature for the paper check.
-            attr_accessor :signature
-
-            def initialize(memo: nil, shipping_speed: nil, signature: nil)
-              @memo = memo
-              @shipping_speed = shipping_speed
-              @signature = signature
-            end
-          end
-          # Open Enum. Speed of the payout.
-          attr_accessor :speed
-          # Open Enum. Method for bank account.
-          attr_accessor :bank_account
-          # Delivery options for paper check.
-          attr_accessor :paper_check
-
-          def initialize(speed: nil, bank_account: nil, paper_check: nil)
-            @speed = speed
-            @bank_account = bank_account
-            @paper_check = paper_check
-          end
-        end
-
-        class From < ::Stripe::RequestParams
-          # Describes the FinancialAmount's currency drawn from.
-          attr_accessor :currency
-          # The FinancialAccount that funds were pulled from.
-          attr_accessor :financial_account
-
-          def initialize(currency: nil, financial_account: nil)
-            @currency = currency
-            @financial_account = financial_account
-          end
-        end
-
-        class RecipientNotification < ::Stripe::RequestParams
-          # Closed Enum. Configuration option to enable or disable notifications to recipients.
-          # Do not send notifications when setting is NONE. Default to account setting when setting is CONFIGURED or not set.
-          attr_accessor :setting
-
-          def initialize(setting: nil)
-            @setting = setting
-          end
-        end
-
-        class To < ::Stripe::RequestParams
-          # Describes the currency to send to the recipient.
-          # If included, this currency must match a currency supported by the destination.
-          # Can be omitted in the following cases:
-          # - destination only supports one currency
-          # - destination supports multiple currencies and one of the currencies matches the FA currency
-          # - destination supports multiple currencies and one of the currencies matches the presentment currency
-          # Note - when both FA currency and presentment currency are supported, we pick the FA currency to minimize FX.
-          attr_accessor :currency
-          # The payout method which the OutboundPayment uses to send payout.
-          attr_accessor :payout_method
-          # To which account the OutboundPayment is sent.
-          attr_accessor :recipient
-
-          def initialize(currency: nil, payout_method: nil, recipient: nil)
-            @currency = currency
-            @payout_method = payout_method
-            @recipient = recipient
-          end
-        end
-        # The "presentment amount" to be sent to the recipient.
-        attr_accessor :amount
-        # Delivery options to be used to send the OutboundPayment.
-        attr_accessor :delivery_options
-        # An arbitrary string attached to the OutboundPayment. Often useful for displaying to users.
-        attr_accessor :description
-        # From which FinancialAccount and BalanceType to pull funds from.
-        attr_accessor :from
-        # Set of key-value pairs that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
-        attr_accessor :metadata
-        # The quote for this OutboundPayment. Only required for countries with regulatory mandates to display fee estimates before OutboundPayment creation.
-        attr_accessor :outbound_payment_quote
-        # Details about the notification settings for the OutboundPayment recipient.
-        attr_accessor :recipient_notification
-        # The recipient verification id for this OutboundPayment. Only required for countries with regulatory mandates to verify recipient names before OutboundPayment creation.
-        attr_accessor :recipient_verification
-        # To which payout method to send the OutboundPayment.
-        attr_accessor :to
-
-        def initialize(
-          amount: nil,
-          delivery_options: nil,
-          description: nil,
-          from: nil,
-          metadata: nil,
-          outbound_payment_quote: nil,
-          recipient_notification: nil,
-          recipient_verification: nil,
-          to: nil
-        )
-          @amount = amount
-          @delivery_options = delivery_options
-          @description = description
-          @from = from
-          @metadata = metadata
-          @outbound_payment_quote = outbound_payment_quote
-          @recipient_notification = recipient_notification
-          @recipient_verification = recipient_verification
-          @to = to
-        end
-      end
-    end
-  end
-end

data/lib/stripe/params/v2/money_management/outbound_payment_list_params.rb

@@ -1,52 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module MoneyManagement
-      class OutboundPaymentListParams < ::Stripe::RequestParams
-        # Filter for objects created at the specified timestamp.
-        # Must be an RFC 3339 date & time value, for example: 2022-09-18T13:22:00Z.
-        attr_accessor :created
-        # Filter for objects created after the specified timestamp.
-        # Must be an RFC 3339 date & time value, for example: 2022-09-18T13:22:00Z.
-        attr_accessor :created_gt
-        # Filter for objects created on or after the specified timestamp.
-        # Must be an RFC 3339 date & time value, for example: 2022-09-18T13:22:00Z.
-        attr_accessor :created_gte
-        # Filter for objects created before the specified timestamp.
-        # Must be an RFC 3339 date & time value, for example: 2022-09-18T13:22:00Z.
-        attr_accessor :created_lt
-        # Filter for objects created on or before the specified timestamp.
-        # Must be an RFC 3339 date & time value, for example: 2022-09-18T13:22:00Z.
-        attr_accessor :created_lte
-        # The maximum number of results to return.
-        attr_accessor :limit
-        # Only return OutboundPayments sent to this recipient.
-        attr_accessor :recipient
-        # Closed Enum. Only return OutboundPayments with this status.
-        attr_accessor :status
-
-        def initialize(
-          created: nil,
-          created_gt: nil,
-          created_gte: nil,
-          created_lt: nil,
-          created_lte: nil,
-          limit: nil,
-          recipient: nil,
-          status: nil
-        )
-          @created = created
-          @created_gt = created_gt
-          @created_gte = created_gte
-          @created_lt = created_lt
-          @created_lte = created_lte
-          @limit = limit
-          @recipient = recipient
-          @status = status
-        end
-      end
-    end
-  end
-end

data/lib/stripe/params/v2/money_management/outbound_payment_quote_create_params.rb

@@ -1,82 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module MoneyManagement
-      class OutboundPaymentQuoteCreateParams < ::Stripe::RequestParams
-        class Amount < ::Stripe::RequestParams
-          # A non-negative integer representing how much to charge in the [smallest currency unit](https://docs.stripe.com/currencies#minor-units).
-          attr_accessor :value
-          # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
-          attr_accessor :currency
-
-          def initialize(value: nil, currency: nil)
-            @value = value
-            @currency = currency
-          end
-        end
-
-        class DeliveryOptions < ::Stripe::RequestParams
-          # Open Enum. Speed of the payout.
-          attr_accessor :speed
-          # Open Enum. Method for bank account.
-          attr_accessor :bank_account
-
-          def initialize(speed: nil, bank_account: nil)
-            @speed = speed
-            @bank_account = bank_account
-          end
-        end
-
-        class From < ::Stripe::RequestParams
-          # Describes the FinancialAccount's currency drawn from.
-          attr_accessor :currency
-          # The FinancialAccount that funds were pulled from.
-          attr_accessor :financial_account
-
-          def initialize(currency: nil, financial_account: nil)
-            @currency = currency
-            @financial_account = financial_account
-          end
-        end
-
-        class To < ::Stripe::RequestParams
-          # Describes the currency to send to the recipient.
-          # If included, this currency must match a currency supported by the destination.
-          # Can be omitted in the following cases:
-          # - destination only supports one currency
-          # - destination supports multiple currencies and one of the currencies matches the FA currency
-          # - destination supports multiple currencies and one of the currencies matches the presentment currency
-          # Note - when both FA currency and presentment currency are supported, we pick the FA currency to minimize FX.
-          attr_accessor :currency
-          # The payout method which the OutboundPayment uses to send payout.
-          attr_accessor :payout_method
-          # To which account the OutboundPayment is sent.
-          attr_accessor :recipient
-
-          def initialize(currency: nil, payout_method: nil, recipient: nil)
-            @currency = currency
-            @payout_method = payout_method
-            @recipient = recipient
-          end
-        end
-        # The "presentment amount" to be sent to the recipient.
-        attr_accessor :amount
-        # Method to be used to send the OutboundPayment.
-        attr_accessor :delivery_options
-        # Request details about the sender of an OutboundPaymentQuote.
-        attr_accessor :from
-        # Request details about the recipient of an OutboundPaymentQuote.
-        attr_accessor :to
-
-        def initialize(amount: nil, delivery_options: nil, from: nil, to: nil)
-          @amount = amount
-          @delivery_options = delivery_options
-          @from = from
-          @to = to
-        end
-      end
-    end
-  end
-end

data/lib/stripe/params/v2/money_management/outbound_payment_quote_retrieve_params.rb

@@ -1,10 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module MoneyManagement
-      class OutboundPaymentQuoteRetrieveParams < ::Stripe::RequestParams; end
-    end
-  end
-end

data/lib/stripe/params/v2/money_management/outbound_payment_retrieve_params.rb

@@ -1,10 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module MoneyManagement
-      class OutboundPaymentRetrieveParams < ::Stripe::RequestParams; end
-    end
-  end
-end

data/lib/stripe/params/v2/money_management/outbound_setup_intent_cancel_params.rb

@@ -1,10 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module MoneyManagement
-      class OutboundSetupIntentCancelParams < ::Stripe::RequestParams; end
-    end
-  end
-end

data/lib/stripe/params/v2/money_management/outbound_setup_intent_create_params.rb

@@ -1,103 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module MoneyManagement
-      class OutboundSetupIntentCreateParams < ::Stripe::RequestParams
-        class PayoutMethodData < ::Stripe::RequestParams
-          class BankAccount < ::Stripe::RequestParams
-            # The account number or IBAN of the bank account.
-            attr_accessor :account_number
-            # Closed Enum. The type of the bank account (checking or savings).
-            attr_accessor :bank_account_type
-            # The branch number of the bank account, if present.
-            attr_accessor :branch_number
-            # The country code of the bank account.
-            attr_accessor :country
-            # The routing number of the bank account, if present.
-            attr_accessor :routing_number
-            # The swift code of the bank account, if present.
-            attr_accessor :swift_code
-
-            def initialize(
-              account_number: nil,
-              bank_account_type: nil,
-              branch_number: nil,
-              country: nil,
-              routing_number: nil,
-              swift_code: nil
-            )
-              @account_number = account_number
-              @bank_account_type = bank_account_type
-              @branch_number = branch_number
-              @country = country
-              @routing_number = routing_number
-              @swift_code = swift_code
-            end
-          end
-
-          class Card < ::Stripe::RequestParams
-            # The expiration month of the card.
-            attr_accessor :exp_month
-            # The expiration year of the card.
-            attr_accessor :exp_year
-            # The card number.
-            attr_accessor :number
-
-            def initialize(exp_month: nil, exp_year: nil, number: nil)
-              @exp_month = exp_month
-              @exp_year = exp_year
-              @number = number
-            end
-          end
-
-          class CryptoWallet < ::Stripe::RequestParams
-            # Crypto wallet address.
-            attr_accessor :address
-            # Optional field, required if network supports memos (only "stellar" currently).
-            attr_accessor :memo
-            # Which rail we should use to make an Outbound money movement to this wallet.
-            attr_accessor :network
-
-            def initialize(address: nil, memo: nil, network: nil)
-              @address = address
-              @memo = memo
-              @network = network
-            end
-          end
-          # Closed Enum. The type of payout method to be created.
-          attr_accessor :type
-          # The type specific details of the bank account payout method.
-          attr_accessor :bank_account
-          # The type specific details of the card payout method.
-          attr_accessor :card
-          # The type specific details of the crypto wallet payout method.
-          attr_accessor :crypto_wallet
-
-          def initialize(type: nil, bank_account: nil, card: nil, crypto_wallet: nil)
-            @type = type
-            @bank_account = bank_account
-            @card = card
-            @crypto_wallet = crypto_wallet
-          end
-        end
-        # If provided, the existing payout method resource to link to this setup intent.
-        # Any payout_method_data provided is used to update information on this linked payout method resource.
-        attr_accessor :payout_method
-        # If no payout_method provided, used to create the underlying credential that is set up for outbound money movement.
-        # If a payout_method provided, used to update data on the credential linked to this setup intent.
-        attr_accessor :payout_method_data
-        # Specify which type of outbound money movement this credential should be set up for (payment | transfer).
-        # If not provided, defaults to payment.
-        attr_accessor :usage_intent
-
-        def initialize(payout_method: nil, payout_method_data: nil, usage_intent: nil)
-          @payout_method = payout_method
-          @payout_method_data = payout_method_data
-          @usage_intent = usage_intent
-        end
-      end
-    end
-  end
-end

data/lib/stripe/params/v2/money_management/outbound_setup_intent_list_params.rb

@@ -1,17 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module MoneyManagement
-      class OutboundSetupIntentListParams < ::Stripe::RequestParams
-        # The page size.
-        attr_accessor :limit
-
-        def initialize(limit: nil)
-          @limit = limit
-        end
-      end
-    end
-  end
-end

data/lib/stripe/params/v2/money_management/outbound_setup_intent_retrieve_params.rb

@@ -1,10 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module MoneyManagement
-      class OutboundSetupIntentRetrieveParams < ::Stripe::RequestParams; end
-    end
-  end
-end

data/lib/stripe/params/v2/money_management/outbound_setup_intent_update_params.rb

@@ -1,80 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module MoneyManagement
-      class OutboundSetupIntentUpdateParams < ::Stripe::RequestParams
-        class PayoutMethodData < ::Stripe::RequestParams
-          class BankAccount < ::Stripe::RequestParams
-            # The account number or IBAN of the bank account.
-            attr_accessor :account_number
-            # Closed Enum. The type of the bank account (checking or savings).
-            attr_accessor :bank_account_type
-            # The branch number of the bank account, if present.
-            attr_accessor :branch_number
-            # The country code of the bank account.
-            attr_accessor :country
-            # The routing number of the bank account, if present.
-            attr_accessor :routing_number
-            # The swift code of the bank account, if present.
-            attr_accessor :swift_code
-
-            def initialize(
-              account_number: nil,
-              bank_account_type: nil,
-              branch_number: nil,
-              country: nil,
-              routing_number: nil,
-              swift_code: nil
-            )
-              @account_number = account_number
-              @bank_account_type = bank_account_type
-              @branch_number = branch_number
-              @country = country
-              @routing_number = routing_number
-              @swift_code = swift_code
-            end
-          end
-
-          class Card < ::Stripe::RequestParams
-            # The expiration month of the card.
-            attr_accessor :exp_month
-            # The expiration year of the card.
-            attr_accessor :exp_year
-            # The card number. This can only be passed when creating a new credential on an outbound setup intent in the requires_payout_method state.
-            attr_accessor :number
-
-            def initialize(exp_month: nil, exp_year: nil, number: nil)
-              @exp_month = exp_month
-              @exp_year = exp_year
-              @number = number
-            end
-          end
-          # Closed Enum. The type of payout method to be created/updated.
-          attr_accessor :type
-          # The type specific details of the bank account payout method.
-          attr_accessor :bank_account
-          # The type specific details of the card payout method.
-          attr_accessor :card
-
-          def initialize(type: nil, bank_account: nil, card: nil)
-            @type = type
-            @bank_account = bank_account
-            @card = card
-          end
-        end
-        # If provided, the existing payout method resource to link to this outbound setup intent.
-        attr_accessor :payout_method
-        # If no payout_method provided, used to create the underlying credential that is set up for outbound money movement.
-        # If a payout_method provided, used to update data on the credential linked to this setup intent.
-        attr_accessor :payout_method_data
-
-        def initialize(payout_method: nil, payout_method_data: nil)
-          @payout_method = payout_method
-          @payout_method_data = payout_method_data
-        end
-      end
-    end
-  end
-end

data/lib/stripe/params/v2/money_management/outbound_transfer_cancel_params.rb

@@ -1,10 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module MoneyManagement
-      class OutboundTransferCancelParams < ::Stripe::RequestParams; end
-    end
-  end
-end