stripe 18.1.0.pre.beta.1 → 18.2.0.pre.alpha.1

data/lib/stripe/params/payment_intent_create_params.rb

@@ -3,6 +3,15 @@
 
 module Stripe
   class PaymentIntentCreateParams < ::Stripe::RequestParams
+    class AllocatedFunds < ::Stripe::RequestParams
+      # Whether Allocated Funds creation is enabled for this PaymentIntent.
+      attr_accessor :enabled
+
+      def initialize(enabled: nil)
+        @enabled = enabled
+      end
+    end
+
     class AmountDetails < ::Stripe::RequestParams
       class LineItem < ::Stripe::RequestParams
         class PaymentMethodOptions < ::Stripe::RequestParams
@@ -79,7 +88,7 @@ module Stripe
         end
 
         class Tax < ::Stripe::RequestParams
-          # The total amount of tax on a single line item represented in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal). Required for L3 rates. An integer greater than or equal to 0.
+          # The total amount of tax on a single line item represented in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). Required for L3 rates. An integer greater than or equal to 0.
           #
           # This field is mutually exclusive with the `amount_details[tax][total_tax_amount]` field.
           attr_accessor :total_tax_amount
@@ -88,7 +97,7 @@ module Stripe
             @total_tax_amount = total_tax_amount
           end
         end
-        # The discount applied on this line item represented in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal). An integer greater than 0.
+        # The discount applied on this line item represented in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). An integer greater than 0.
         #
         # This field is mutually exclusive with the `amount_details[discount_amount]` field.
         attr_accessor :discount_amount
@@ -104,7 +113,7 @@ module Stripe
         attr_accessor :quantity
         # Contains information about the tax on the item.
         attr_accessor :tax
-        # The unit cost of the line item represented in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal). Required for L3 rates. An integer greater than or equal to 0.
+        # The unit cost of the line item represented in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). Required for L3 rates. An integer greater than or equal to 0.
         attr_accessor :unit_cost
         # A unit of measure for the line item, such as gallons, feet, meters, etc.
         attr_accessor :unit_of_measure
@@ -131,7 +140,7 @@ module Stripe
       end
 
       class Shipping < ::Stripe::RequestParams
-        # If a physical good is being shipped, the cost of shipping represented in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal). An integer greater than or equal to 0.
+        # If a physical good is being shipped, the cost of shipping represented in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). An integer greater than or equal to 0.
         attr_accessor :amount
         # If a physical good is being shipped, the postal code of where it is being shipped from. At most 10 alphanumeric characters long, hyphens are allowed.
         attr_accessor :from_postal_code
@@ -146,7 +155,7 @@ module Stripe
       end
 
       class Tax < ::Stripe::RequestParams
-        # The total amount of tax on the transaction represented in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal). Required for L2 rates. An integer greater than or equal to 0.
+        # The total amount of tax on the transaction represented in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). Required for L2 rates. An integer greater than or equal to 0.
         #
         # This field is mutually exclusive with the `amount_details[line_items][#][tax][total_tax_amount]` field.
         attr_accessor :total_tax_amount
@@ -155,7 +164,7 @@ module Stripe
           @total_tax_amount = total_tax_amount
         end
       end
-      # The total discount applied on the transaction represented in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal). An integer greater than 0.
+      # The total discount applied on the transaction represented in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). An integer greater than 0.
       #
       # This field is mutually exclusive with the `amount_details[line_items][#][discount_amount]` field.
       attr_accessor :discount_amount
@@ -177,7 +186,7 @@ module Stripe
     class AutomaticPaymentMethods < ::Stripe::RequestParams
       # Controls whether this PaymentIntent will accept redirect-based payment methods.
       #
-      # Redirect-based payment methods may require your customer to be redirected to a payment method's app or site for authentication or additional steps. To [confirm](https://stripe.com/docs/api/payment_intents/confirm) this PaymentIntent, you may be required to provide a `return_url` to redirect customers back to your site after they authenticate or complete the payment.
+      # Redirect-based payment methods may require your customer to be redirected to a payment method's app or site for authentication or additional steps. To [confirm](https://docs.stripe.com/api/payment_intents/confirm) this PaymentIntent, you may be required to provide a `return_url` to redirect customers back to your site after they authenticate or complete the payment.
       attr_accessor :allow_redirects
       # Whether this feature is enabled.
       attr_accessor :enabled
@@ -191,7 +200,7 @@ module Stripe
     class Hooks < ::Stripe::RequestParams
       class Inputs < ::Stripe::RequestParams
         class Tax < ::Stripe::RequestParams
-          # The [TaxCalculation](https://stripe.com/docs/api/tax/calculations) id
+          # The [TaxCalculation](https://docs.stripe.com/api/tax/calculations) id
           attr_accessor :calculation
 
           def initialize(calculation: nil)
@@ -253,6 +262,23 @@ module Stripe
     end
 
     class PaymentDetails < ::Stripe::RequestParams
+      class Benefit < ::Stripe::RequestParams
+        class FrMealVoucher < ::Stripe::RequestParams
+          # The 14-digit SIRET of the meal voucher acceptor.
+          attr_accessor :siret
+
+          def initialize(siret: nil)
+            @siret = siret
+          end
+        end
+        # French meal voucher benefit details for this PaymentIntent.
+        attr_accessor :fr_meal_voucher
+
+        def initialize(fr_meal_voucher: nil)
+          @fr_meal_voucher = fr_meal_voucher
+        end
+      end
+
       class CarRental < ::Stripe::RequestParams
         class Affiliate < ::Stripe::RequestParams
           # The name of the affiliate that originated the purchase.
@@ -327,7 +353,7 @@ module Stripe
           attr_accessor :line2
           # ZIP or postal code.
           attr_accessor :postal_code
-          # State, county, province, or region.
+          # State, county, province, or region ([ISO 3166-2](https://en.wikipedia.org/wiki/ISO_3166-2)).
           attr_accessor :state
 
           def initialize(
@@ -358,7 +384,7 @@ module Stripe
           attr_accessor :line2
           # ZIP or postal code.
           attr_accessor :postal_code
-          # State, county, province, or region.
+          # State, county, province, or region ([ISO 3166-2](https://en.wikipedia.org/wiki/ISO_3166-2)).
           attr_accessor :state
 
           def initialize(
@@ -553,7 +579,7 @@ module Stripe
             attr_accessor :line2
             # ZIP or postal code.
             attr_accessor :postal_code
-            # State, county, province, or region.
+            # State, county, province, or region ([ISO 3166-2](https://en.wikipedia.org/wiki/ISO_3166-2)).
             attr_accessor :state
 
             def initialize(
@@ -621,7 +647,7 @@ module Stripe
             attr_accessor :line2
             # ZIP or postal code.
             attr_accessor :postal_code
-            # State, county, province, or region.
+            # State, county, province, or region ([ISO 3166-2](https://en.wikipedia.org/wiki/ISO_3166-2)).
             attr_accessor :state
 
             def initialize(
@@ -849,7 +875,7 @@ module Stripe
           attr_accessor :line2
           # ZIP or postal code.
           attr_accessor :postal_code
-          # State, county, province, or region.
+          # State, county, province, or region ([ISO 3166-2](https://en.wikipedia.org/wiki/ISO_3166-2)).
           attr_accessor :state
 
           def initialize(
@@ -1347,7 +1373,7 @@ module Stripe
           attr_accessor :line2
           # ZIP or postal code.
           attr_accessor :postal_code
-          # State, county, province, or region.
+          # State, county, province, or region ([ISO 3166-2](https://en.wikipedia.org/wiki/ISO_3166-2)).
           attr_accessor :state
 
           def initialize(
@@ -1569,7 +1595,7 @@ module Stripe
             attr_accessor :line2
             # ZIP or postal code.
             attr_accessor :postal_code
-            # State, county, province, or region.
+            # State, county, province, or region ([ISO 3166-2](https://en.wikipedia.org/wiki/ISO_3166-2)).
             attr_accessor :state
 
             def initialize(
@@ -1844,6 +1870,8 @@ module Stripe
           @starts_at = starts_at
         end
       end
+      # Benefit details for this PaymentIntent
+      attr_accessor :benefit
       # Car rental details for this PaymentIntent.
       attr_accessor :car_rental
       # Car rental data for this PaymentIntent.
@@ -1872,6 +1900,7 @@ module Stripe
       attr_accessor :subscription
 
       def initialize(
+        benefit: nil,
         car_rental: nil,
         car_rental_data: nil,
         customer_reference: nil,
@@ -1883,6 +1912,7 @@ module Stripe
         order_reference: nil,
         subscription: nil
       )
+        @benefit = benefit
         @car_rental = car_rental
         @car_rental_data = car_rental_data
         @customer_reference = customer_reference
@@ -1957,7 +1987,7 @@ module Stripe
           attr_accessor :line2
           # ZIP or postal code.
           attr_accessor :postal_code
-          # State, county, province, or region.
+          # State, county, province, or region ([ISO 3166-2](https://en.wikipedia.org/wiki/ISO_3166-2)).
           attr_accessor :state
 
           def initialize(
@@ -2164,7 +2194,7 @@ module Stripe
       class Qris < ::Stripe::RequestParams; end
 
       class RadarOptions < ::Stripe::RequestParams
-        # A [Radar Session](https://stripe.com/docs/radar/radar-session) is a snapshot of the browser metadata and device details that help Radar make more accurate predictions on your payments.
+        # A [Radar Session](https://docs.stripe.com/radar/radar-session) is a snapshot of the browser metadata and device details that help Radar make more accurate predictions on your payments.
         attr_accessor :session
 
         def initialize(session: nil)
@@ -2325,7 +2355,7 @@ module Stripe
       attr_accessor :link
       # If this is a MB WAY PaymentMethod, this hash contains details about the MB WAY payment method.
       attr_accessor :mb_way
-      # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
+      # Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
       attr_accessor :metadata
       # If this is a `mobilepay` PaymentMethod, this hash contains details about the MobilePay payment method.
       attr_accessor :mobilepay
@@ -2357,7 +2387,7 @@ module Stripe
       attr_accessor :promptpay
       # If this is a `qris` PaymentMethod, this hash contains details about the QRIS payment method.
       attr_accessor :qris
-      # Options to configure Radar. See [Radar Session](https://stripe.com/docs/radar/radar-session) for more information.
+      # Options to configure Radar. See [Radar Session](https://docs.stripe.com/radar/radar-session) for more information.
       attr_accessor :radar_options
       # If this is a `rechnung` PaymentMethod, this hash contains details about the Rechnung payment method.
       attr_accessor :rechnung
@@ -2890,7 +2920,7 @@ module Stripe
             attr_accessor :line2
             # ZIP or postal code.
             attr_accessor :postal_code
-            # State, county, province, or region.
+            # State, county, province, or region ([ISO 3166-2](https://en.wikipedia.org/wiki/ISO_3166-2)).
             attr_accessor :state
 
             def initialize(
@@ -3004,7 +3034,7 @@ module Stripe
         attr_accessor :cvc_token
         # Installment configuration for payments attempted on this PaymentIntent.
         #
-        # For more information, see the [installments integration guide](https://stripe.com/docs/payments/installments).
+        # For more information, see the [installments integration guide](https://docs.stripe.com/payments/installments).
         attr_accessor :installments
         # Configuration options for setting up an eMandate for cards issued in India.
         attr_accessor :mandate_options
@@ -3014,19 +3044,19 @@ module Stripe
         attr_accessor :moto
         # Selected network to process this PaymentIntent on. Depends on the available networks of the card attached to the PaymentIntent. Can be only set confirm-time.
         attr_accessor :network
-        # Request ability to [decrement the authorization](https://stripe.com/docs/payments/decremental-authorization) for this PaymentIntent.
+        # Request ability to [decrement the authorization](https://docs.stripe.com/payments/decremental-authorization) for this PaymentIntent.
         attr_accessor :request_decremental_authorization
-        # Request ability to [capture beyond the standard authorization validity window](https://stripe.com/docs/payments/extended-authorization) for this PaymentIntent.
+        # Request ability to [capture beyond the standard authorization validity window](https://docs.stripe.com/payments/extended-authorization) for this PaymentIntent.
         attr_accessor :request_extended_authorization
-        # Request ability to [increment the authorization](https://stripe.com/docs/payments/incremental-authorization) for this PaymentIntent.
+        # Request ability to [increment the authorization](https://docs.stripe.com/payments/incremental-authorization) for this PaymentIntent.
         attr_accessor :request_incremental_authorization
-        # Request ability to make [multiple captures](https://stripe.com/docs/payments/multicapture) for this PaymentIntent.
+        # Request ability to make [multiple captures](https://docs.stripe.com/payments/multicapture) for this PaymentIntent.
         attr_accessor :request_multicapture
-        # Request ability to [overcapture](https://stripe.com/docs/payments/overcapture) for this PaymentIntent.
+        # Request ability to [overcapture](https://docs.stripe.com/payments/overcapture) for this PaymentIntent.
         attr_accessor :request_overcapture
         # Request partial authorization on this PaymentIntent.
         attr_accessor :request_partial_authorization
-        # We strongly recommend that you rely on our SCA Engine to automatically prompt your customers for authentication based on risk level and [other requirements](https://stripe.com/docs/strong-customer-authentication). However, if you wish to request 3D Secure based on logic from your own fraud engine, provide this option. If not provided, this value defaults to `automatic`. Read our guide on [manually requesting 3D Secure](https://stripe.com/docs/payments/3d-secure/authentication-flow#manual-three-ds) for more information on how this configuration interacts with Radar and our SCA Engine.
+        # We strongly recommend that you rely on our SCA Engine to automatically prompt your customers for authentication based on risk level and [other requirements](https://docs.stripe.com/strong-customer-authentication). However, if you wish to request 3D Secure based on logic from your own fraud engine, provide this option. If not provided, this value defaults to `automatic`. Read our guide on [manually requesting 3D Secure](https://docs.stripe.com/payments/3d-secure/authentication-flow#manual-three-ds) for more information on how this configuration interacts with Radar and our SCA Engine.
         attr_accessor :request_three_d_secure
         # When enabled, using a card that is attached to a customer will require the CVC to be provided again (i.e. using the cvc_token parameter).
         attr_accessor :require_cvc_recollection
@@ -3108,9 +3138,9 @@ module Stripe
         #
         # If `capture_method` is already set on the PaymentIntent, providing an empty value for this parameter unsets the stored value for this payment method type.
         attr_accessor :capture_method
-        # Request ability to capture this payment beyond the standard [authorization validity window](https://stripe.com/docs/terminal/features/extended-authorizations#authorization-validity)
+        # Request ability to capture this payment beyond the standard [authorization validity window](https://docs.stripe.com/terminal/features/extended-authorizations#authorization-validity)
         attr_accessor :request_extended_authorization
-        # Request ability to [increment](https://stripe.com/docs/terminal/features/incremental-authorizations) this PaymentIntent if the combination of MCC and card brand is eligible. Check [incremental_authorization_supported](https://stripe.com/docs/api/charges/object#charge_object-payment_method_details-card_present-incremental_authorization_supported) in the [Confirm](https://stripe.com/docs/api/payment_intents/confirm) response to verify support.
+        # Request ability to [increment](https://docs.stripe.com/terminal/features/incremental-authorizations) this PaymentIntent if the combination of MCC and card brand is eligible. Check [incremental_authorization_supported](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-incremental_authorization_supported) in the [Confirm](https://docs.stripe.com/api/payment_intents/confirm) response to verify support.
         attr_accessor :request_incremental_authorization_support
         # Network routing priority on co-branded EMV cards supporting domestic debit and international card schemes.
         attr_accessor :routing
@@ -4715,7 +4745,7 @@ module Stripe
         attr_accessor :capture_method
         # The line items purchased by the customer.
         attr_accessor :line_items
-        # [Preferred locale](https://stripe.com/docs/payments/paypal/supported-locales) of the PayPal checkout page that the customer is redirected to.
+        # [Preferred locale](https://docs.stripe.com/payments/paypal/supported-locales) of the PayPal checkout page that the customer is redirected to.
         attr_accessor :preferred_locale
         # A reference of the PayPal transaction visible to customer which is mapped to PayPal's invoice ID. This must be a globally unique ID if you have configured in your PayPal settings to block multiple payments per invoice ID.
         attr_accessor :reference
@@ -5487,8 +5517,17 @@ module Stripe
       end
     end
 
+    class PaymentsOrchestration < ::Stripe::RequestParams
+      # Whether this feature is enabled.
+      attr_accessor :enabled
+
+      def initialize(enabled: nil)
+        @enabled = enabled
+      end
+    end
+
     class RadarOptions < ::Stripe::RequestParams
-      # A [Radar Session](https://stripe.com/docs/radar/radar-session) is a snapshot of the browser metadata and device details that help Radar make more accurate predictions on your payments.
+      # A [Radar Session](https://docs.stripe.com/radar/radar-session) is a snapshot of the browser metadata and device details that help Radar make more accurate predictions on your payments.
       attr_accessor :session
 
       def initialize(session: nil)
@@ -5508,7 +5547,7 @@ module Stripe
         attr_accessor :line2
         # ZIP or postal code.
         attr_accessor :postal_code
-        # State, county, province, or region.
+        # State, county, province, or region ([ISO 3166-2](https://en.wikipedia.org/wiki/ISO_3166-2)).
         attr_accessor :state
 
         def initialize(
@@ -5553,7 +5592,7 @@ module Stripe
       # the full amount is transferred.
       #
       # If you intend to collect a fee and you need a more robust reporting experience, using
-      # [application_fee_amount](https://stripe.com/docs/api/payment_intents/create#create_payment_intent-application_fee_amount)
+      # [application_fee_amount](https://docs.stripe.com/api/payment_intents/create#create_payment_intent-application_fee_amount)
       # might be a better fit for your integration.
       attr_accessor :amount
       # If specified, successful charges will be attributed to the destination
@@ -5567,17 +5606,19 @@ module Stripe
         @destination = destination
       end
     end
-    # Amount intended to be collected by this PaymentIntent. A positive integer representing how much to charge in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal) (e.g., 100 cents to charge $1.00 or 100 to charge ¥100, a zero-decimal currency). The minimum amount is $0.50 US or [equivalent in charge currency](https://stripe.com/docs/currencies#minimum-and-maximum-charge-amounts). The amount value supports up to eight digits (e.g., a value of 99999999 for a USD charge of $999,999.99).
+    # Allocated Funds configuration for this PaymentIntent.
+    attr_accessor :allocated_funds
+    # Amount intended to be collected by this PaymentIntent. A positive integer representing how much to charge in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal) (e.g., 100 cents to charge $1.00 or 100 to charge ¥100, a zero-decimal currency). The minimum amount is $0.50 US or [equivalent in charge currency](https://docs.stripe.com/currencies#minimum-and-maximum-charge-amounts). The amount value supports up to eight digits (e.g., a value of 99999999 for a USD charge of $999,999.99).
     attr_accessor :amount
     # Provides industry-specific information about the amount.
     attr_accessor :amount_details
-    # The amount of the application fee (if any) that will be requested to be applied to the payment and transferred to the application owner's Stripe account. The amount of the application fee collected will be capped at the total amount captured. For more information, see the PaymentIntents [use case for connected accounts](https://stripe.com/docs/payments/connected-accounts).
+    # The amount of the application fee (if any) that will be requested to be applied to the payment and transferred to the application owner's Stripe account. The amount of the application fee collected will be capped at the total amount captured. For more information, see the PaymentIntents [use case for connected accounts](https://docs.stripe.com/payments/connected-accounts).
     attr_accessor :application_fee_amount
     # When you enable this parameter, this PaymentIntent accepts payment methods that you enable in the Dashboard and that are compatible with this PaymentIntent's other parameters.
     attr_accessor :automatic_payment_methods
     # Controls when the funds will be captured from the customer's account.
     attr_accessor :capture_method
-    # Set to `true` to attempt to [confirm this PaymentIntent](https://stripe.com/docs/api/payment_intents/confirm) immediately. This parameter defaults to `false`. When creating and confirming a PaymentIntent at the same time, you can also provide the parameters available in the [Confirm API](https://stripe.com/docs/api/payment_intents/confirm).
+    # Set to `true` to attempt to [confirm this PaymentIntent](https://docs.stripe.com/api/payment_intents/confirm) immediately. This parameter defaults to `false`. When creating and confirming a PaymentIntent at the same time, you can also provide the parameters available in the [Confirm API](https://docs.stripe.com/api/payment_intents/confirm).
     attr_accessor :confirm
     # Describes whether we can confirm this PaymentIntent automatically, or if it requires customer action to confirm the payment.
     attr_accessor :confirmation_method
@@ -5591,17 +5632,17 @@ module Stripe
     #
     # Payment methods attached to other Customers cannot be used with this PaymentIntent.
     #
-    # If [setup_future_usage](https://stripe.com/docs/api#payment_intent_object-setup_future_usage) is set and this PaymentIntent's payment method is not `card_present`, then the payment method attaches to the Customer after the PaymentIntent has been confirmed and any required actions from the user are complete. If the payment method is `card_present` and isn't a digital wallet, then a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card is created and attached to the Customer instead.
+    # If [setup_future_usage](https://api.stripe.com#payment_intent_object-setup_future_usage) is set and this PaymentIntent's payment method is not `card_present`, then the payment method attaches to the Customer after the PaymentIntent has been confirmed and any required actions from the user are complete. If the payment method is `card_present` and isn't a digital wallet, then a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card is created and attached to the Customer instead.
     attr_accessor :customer
-    # ID of the Account this PaymentIntent belongs to, if one exists.
+    # ID of the Account representing the customer that this PaymentIntent belongs to, if one exists.
     #
     # Payment methods attached to other Accounts cannot be used with this PaymentIntent.
     #
-    # If [setup_future_usage](https://stripe.com/docs/api#payment_intent_object-setup_future_usage) is set and this PaymentIntent's payment method is not `card_present`, then the payment method attaches to the Account after the PaymentIntent has been confirmed and any required actions from the user are complete. If the payment method is `card_present` and isn't a digital wallet, then a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card is created and attached to the Account instead.
+    # If [setup_future_usage](https://api.stripe.com#payment_intent_object-setup_future_usage) is set and this PaymentIntent's payment method is not `card_present`, then the payment method attaches to the Account after the PaymentIntent has been confirmed and any required actions from the user are complete. If the payment method is `card_present` and isn't a digital wallet, then a [generated_card](https://docs.stripe.com/api/charges/object#charge_object-payment_method_details-card_present-generated_card) payment method representing the card is created and attached to the Account instead.
     attr_accessor :customer_account
     # An arbitrary string attached to the object. Often useful for displaying to users.
     attr_accessor :description
-    # Set to `true` to fail the payment attempt if the PaymentIntent transitions into `requires_action`. Use this parameter for simpler integrations that don't handle customer actions, such as [saving cards without authentication](https://stripe.com/docs/payments/save-card-without-authentication). This parameter can only be used with [`confirm=true`](https://stripe.com/docs/api/payment_intents/create#create_payment_intent-confirm).
+    # Set to `true` to fail the payment attempt if the PaymentIntent transitions into `requires_action`. Use this parameter for simpler integrations that don't handle customer actions, such as [saving cards without authentication](https://docs.stripe.com/payments/save-card-without-authentication). This parameter can only be used with [`confirm=true`](https://docs.stripe.com/api/payment_intents/create#create_payment_intent-confirm).
     attr_accessor :error_on_requires_action
     # The list of payment method types to exclude from use with this payment.
     attr_accessor :excluded_payment_method_types
@@ -5611,39 +5652,41 @@ module Stripe
     attr_accessor :fx_quote
     # Automations to be run during the PaymentIntent lifecycle
     attr_accessor :hooks
-    # ID of the mandate that's used for this payment. This parameter can only be used with [`confirm=true`](https://stripe.com/docs/api/payment_intents/create#create_payment_intent-confirm).
+    # ID of the mandate that's used for this payment. This parameter can only be used with [`confirm=true`](https://docs.stripe.com/api/payment_intents/create#create_payment_intent-confirm).
     attr_accessor :mandate
-    # This hash contains details about the Mandate to create. This parameter can only be used with [`confirm=true`](https://stripe.com/docs/api/payment_intents/create#create_payment_intent-confirm).
+    # This hash contains details about the Mandate to create. This parameter can only be used with [`confirm=true`](https://docs.stripe.com/api/payment_intents/create#create_payment_intent-confirm).
     attr_accessor :mandate_data
-    # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
+    # Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
     attr_accessor :metadata
-    # Set to `true` to indicate that the customer isn't in your checkout flow during this payment attempt and can't authenticate. Use this parameter in scenarios where you collect card details and [charge them later](https://stripe.com/docs/payments/cards/charging-saved-cards). This parameter can only be used with [`confirm=true`](https://stripe.com/docs/api/payment_intents/create#create_payment_intent-confirm).
+    # Set to `true` to indicate that the customer isn't in your checkout flow during this payment attempt and can't authenticate. Use this parameter in scenarios where you collect card details and [charge them later](https://docs.stripe.com/payments/cards/charging-saved-cards). This parameter can only be used with [`confirm=true`](https://docs.stripe.com/api/payment_intents/create#create_payment_intent-confirm).
     attr_accessor :off_session
-    # The Stripe account ID that these funds are intended for. Learn more about the [use case for connected accounts](https://stripe.com/docs/payments/connected-accounts).
+    # The Stripe account ID that these funds are intended for. Learn more about the [use case for connected accounts](https://docs.stripe.com/payments/connected-accounts).
     attr_accessor :on_behalf_of
     # Provides industry-specific information about the charge.
     attr_accessor :payment_details
-    # ID of the payment method (a PaymentMethod, Card, or [compatible Source](https://stripe.com/docs/payments/payment-methods#compatibility) object) to attach to this PaymentIntent.
+    # ID of the payment method (a PaymentMethod, Card, or [compatible Source](https://docs.stripe.com/payments/payment-methods#compatibility) object) to attach to this PaymentIntent.
     #
     # If you don't provide the `payment_method` parameter or the `source` parameter with `confirm=true`, `source` automatically populates with `customer.default_source` to improve migration for users of the Charges API. We recommend that you explicitly provide the `payment_method` moving forward.
-    # If the payment method is attached to a Customer, you must also provide the ID of that Customer as the [customer](https://stripe.com/docs/api#create_payment_intent-customer) parameter of this PaymentIntent.
+    # If the payment method is attached to a Customer, you must also provide the ID of that Customer as the [customer](https://api.stripe.com#create_payment_intent-customer) parameter of this PaymentIntent.
     # end
     attr_accessor :payment_method
-    # The ID of the [payment method configuration](https://stripe.com/docs/api/payment_method_configurations) to use with this PaymentIntent.
+    # The ID of the [payment method configuration](https://docs.stripe.com/api/payment_method_configurations) to use with this PaymentIntent.
     attr_accessor :payment_method_configuration
     # If provided, this hash will be used to create a PaymentMethod. The new PaymentMethod will appear
-    # in the [payment_method](https://stripe.com/docs/api/payment_intents/object#payment_intent_object-payment_method)
+    # in the [payment_method](https://docs.stripe.com/api/payment_intents/object#payment_intent_object-payment_method)
     # property on the PaymentIntent.
     attr_accessor :payment_method_data
     # Payment method-specific configuration for this PaymentIntent.
     attr_accessor :payment_method_options
     # The list of payment method types (for example, a card) that this PaymentIntent can use. If you don't provide this, Stripe will dynamically show relevant payment methods from your [payment method settings](https://dashboard.stripe.com/settings/payment_methods). A list of valid payment method types can be found [here](https://docs.stripe.com/api/payment_methods/object#payment_method_object-type).
     attr_accessor :payment_method_types
-    # Options to configure Radar. Learn more about [Radar Sessions](https://stripe.com/docs/radar/radar-session).
+    # When you enable this parameter, this PaymentIntent will route your payment to processors that you configure in the dashboard.
+    attr_accessor :payments_orchestration
+    # Options to configure Radar. Learn more about [Radar Sessions](https://docs.stripe.com/radar/radar-session).
     attr_accessor :radar_options
     # Email address to send the receipt to. If you specify `receipt_email` for a payment in live mode, you send a receipt regardless of your [email settings](https://dashboard.stripe.com/account/emails).
     attr_accessor :receipt_email
-    # The URL to redirect your customer back to after they authenticate or cancel their payment on the payment method's app or site. If you'd prefer to redirect to a mobile application, you can alternatively supply an application URI scheme. This parameter can only be used with [`confirm=true`](https://stripe.com/docs/api/payment_intents/create#create_payment_intent-confirm).
+    # The URL to redirect your customer back to after they authenticate or cancel their payment on the payment method's app or site. If you'd prefer to redirect to a mobile application, you can alternatively supply an application URI scheme. This parameter can only be used with [`confirm=true`](https://docs.stripe.com/api/payment_intents/create#create_payment_intent-confirm).
     attr_accessor :return_url
     # Indicates whether confirmation for this PaymentIntent using a secret key is `required` or `optional`.
     attr_accessor :secret_key_confirmation
@@ -5664,14 +5707,17 @@ module Stripe
     # Provides information about a card charge. Concatenated to the account's [statement descriptor prefix](https://docs.stripe.com/get-started/account/statement-descriptors#static) to form the complete statement descriptor that appears on the customer's statement.
     attr_accessor :statement_descriptor_suffix
     # The parameters that you can use to automatically create a Transfer.
-    # Learn more about the [use case for connected accounts](https://stripe.com/docs/payments/connected-accounts).
+    # Learn more about the [use case for connected accounts](https://docs.stripe.com/payments/connected-accounts).
     attr_accessor :transfer_data
-    # A string that identifies the resulting payment as part of a group. Learn more about the [use case for connected accounts](https://stripe.com/docs/connect/separate-charges-and-transfers).
+    # A string that identifies the resulting payment as part of a group. Learn more about the [use case for connected accounts](https://docs.stripe.com/connect/separate-charges-and-transfers).
     attr_accessor :transfer_group
     # Set to `true` when confirming server-side and using Stripe.js, iOS, or Android client-side SDKs to handle the next actions.
     attr_accessor :use_stripe_sdk
+    # ID of the SharedPaymentToken used to confirm this PaymentIntent.
+    attr_accessor :shared_payment_granted_token
 
     def initialize(
+      allocated_funds: nil,
       amount: nil,
       amount_details: nil,
       application_fee_amount: nil,
@@ -5700,6 +5746,7 @@ module Stripe
       payment_method_data: nil,
       payment_method_options: nil,
       payment_method_types: nil,
+      payments_orchestration: nil,
       radar_options: nil,
       receipt_email: nil,
       return_url: nil,
@@ -5710,8 +5757,10 @@ module Stripe
       statement_descriptor_suffix: nil,
       transfer_data: nil,
       transfer_group: nil,
-      use_stripe_sdk: nil
+      use_stripe_sdk: nil,
+      shared_payment_granted_token: nil
     )
+      @allocated_funds = allocated_funds
       @amount = amount
       @amount_details = amount_details
       @application_fee_amount = application_fee_amount
@@ -5740,6 +5789,7 @@ module Stripe
       @payment_method_data = payment_method_data
       @payment_method_options = payment_method_options
       @payment_method_types = payment_method_types
+      @payments_orchestration = payments_orchestration
       @radar_options = radar_options
       @receipt_email = receipt_email
       @return_url = return_url
@@ -5751,6 +5801,7 @@ module Stripe
       @transfer_data = transfer_data
       @transfer_group = transfer_group
       @use_stripe_sdk = use_stripe_sdk
+      @shared_payment_granted_token = shared_payment_granted_token
     end
   end
 end

data/lib/stripe/params/payment_intent_decrement_authorization_params.rb

@@ -6,7 +6,7 @@ module Stripe
     class Hooks < ::Stripe::RequestParams
       class Inputs < ::Stripe::RequestParams
         class Tax < ::Stripe::RequestParams
-          # The [TaxCalculation](https://stripe.com/docs/api/tax/calculations) id
+          # The [TaxCalculation](https://docs.stripe.com/api/tax/calculations) id
           attr_accessor :calculation
 
           def initialize(calculation: nil)
@@ -38,7 +38,7 @@ module Stripe
     end
     # The updated total amount that you intend to collect from the cardholder. This amount must be smaller than the currently authorized amount and greater than the already captured amount.
     attr_accessor :amount
-    # The amount of the application fee (if any) that will be requested to be applied to the payment and transferred to the application owner's Stripe account. The amount of the application fee collected will be capped at the total amount captured. For more information, see the PaymentIntents [use case for connected accounts](https://stripe.com/docs/payments/connected-accounts).
+    # The amount of the application fee (if any) that will be requested to be applied to the payment and transferred to the application owner's Stripe account. The amount of the application fee collected will be capped at the total amount captured. For more information, see the PaymentIntents [use case for connected accounts](https://docs.stripe.com/payments/connected-accounts).
     attr_accessor :application_fee_amount
     # An arbitrary string attached to the object. Often useful for displaying to users.
     attr_accessor :description
@@ -46,10 +46,10 @@ module Stripe
     attr_accessor :expand
     # Automations to be run during the PaymentIntent lifecycle
     attr_accessor :hooks
-    # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
+    # Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
     attr_accessor :metadata
     # The parameters used to automatically create a transfer after the payment is captured.
-    # Learn more about the [use case for connected accounts](https://stripe.com/docs/payments/connected-accounts).
+    # Learn more about the [use case for connected accounts](https://docs.stripe.com/payments/connected-accounts).
     attr_accessor :transfer_data
 
     def initialize(

data/lib/stripe/params/payment_intent_increment_authorization_params.rb

@@ -79,7 +79,7 @@ module Stripe
         end
 
         class Tax < ::Stripe::RequestParams
-          # The total amount of tax on a single line item represented in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal). Required for L3 rates. An integer greater than or equal to 0.
+          # The total amount of tax on a single line item represented in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). Required for L3 rates. An integer greater than or equal to 0.
           #
           # This field is mutually exclusive with the `amount_details[tax][total_tax_amount]` field.
           attr_accessor :total_tax_amount
@@ -88,7 +88,7 @@ module Stripe
             @total_tax_amount = total_tax_amount
           end
         end
-        # The discount applied on this line item represented in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal). An integer greater than 0.
+        # The discount applied on this line item represented in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). An integer greater than 0.
         #
         # This field is mutually exclusive with the `amount_details[discount_amount]` field.
         attr_accessor :discount_amount
@@ -104,7 +104,7 @@ module Stripe
         attr_accessor :quantity
         # Contains information about the tax on the item.
         attr_accessor :tax
-        # The unit cost of the line item represented in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal). Required for L3 rates. An integer greater than or equal to 0.
+        # The unit cost of the line item represented in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). Required for L3 rates. An integer greater than or equal to 0.
         attr_accessor :unit_cost
         # A unit of measure for the line item, such as gallons, feet, meters, etc.
         attr_accessor :unit_of_measure
@@ -131,7 +131,7 @@ module Stripe
       end
 
       class Shipping < ::Stripe::RequestParams
-        # If a physical good is being shipped, the cost of shipping represented in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal). An integer greater than or equal to 0.
+        # If a physical good is being shipped, the cost of shipping represented in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). An integer greater than or equal to 0.
         attr_accessor :amount
         # If a physical good is being shipped, the postal code of where it is being shipped from. At most 10 alphanumeric characters long, hyphens are allowed.
         attr_accessor :from_postal_code
@@ -146,7 +146,7 @@ module Stripe
       end
 
       class Tax < ::Stripe::RequestParams
-        # The total amount of tax on the transaction represented in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal). Required for L2 rates. An integer greater than or equal to 0.
+        # The total amount of tax on the transaction represented in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). Required for L2 rates. An integer greater than or equal to 0.
         #
         # This field is mutually exclusive with the `amount_details[line_items][#][tax][total_tax_amount]` field.
         attr_accessor :total_tax_amount
@@ -155,7 +155,7 @@ module Stripe
           @total_tax_amount = total_tax_amount
         end
       end
-      # The total discount applied on the transaction represented in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal). An integer greater than 0.
+      # The total discount applied on the transaction represented in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). An integer greater than 0.
       #
       # This field is mutually exclusive with the `amount_details[line_items][#][discount_amount]` field.
       attr_accessor :discount_amount
@@ -177,7 +177,7 @@ module Stripe
     class Hooks < ::Stripe::RequestParams
       class Inputs < ::Stripe::RequestParams
         class Tax < ::Stripe::RequestParams
-          # The [TaxCalculation](https://stripe.com/docs/api/tax/calculations) id
+          # The [TaxCalculation](https://docs.stripe.com/api/tax/calculations) id
           attr_accessor :calculation
 
           def initialize(calculation: nil)
@@ -246,7 +246,7 @@ module Stripe
     attr_accessor :amount
     # Provides industry-specific information about the amount.
     attr_accessor :amount_details
-    # The amount of the application fee (if any) that will be requested to be applied to the payment and transferred to the application owner's Stripe account. The amount of the application fee collected will be capped at the total amount captured. For more information, see the PaymentIntents [use case for connected accounts](https://stripe.com/docs/payments/connected-accounts).
+    # The amount of the application fee (if any) that will be requested to be applied to the payment and transferred to the application owner's Stripe account. The amount of the application fee collected will be capped at the total amount captured. For more information, see the PaymentIntents [use case for connected accounts](https://docs.stripe.com/payments/connected-accounts).
     attr_accessor :application_fee_amount
     # An arbitrary string attached to the object. Often useful for displaying to users.
     attr_accessor :description
@@ -254,7 +254,7 @@ module Stripe
     attr_accessor :expand
     # Automations to be run during the PaymentIntent lifecycle
     attr_accessor :hooks
-    # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
+    # Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
     attr_accessor :metadata
     # Provides industry-specific information about the charge.
     attr_accessor :payment_details
@@ -263,7 +263,7 @@ module Stripe
     # Text that appears on the customer's statement as the statement descriptor for a non-card or card charge. This value overrides the account's default statement descriptor. For information about requirements, including the 22-character limit, see [the Statement Descriptor docs](https://docs.stripe.com/get-started/account/statement-descriptors).
     attr_accessor :statement_descriptor
     # The parameters used to automatically create a transfer after the payment is captured.
-    # Learn more about the [use case for connected accounts](https://stripe.com/docs/payments/connected-accounts).
+    # Learn more about the [use case for connected accounts](https://docs.stripe.com/payments/connected-accounts).
     attr_accessor :transfer_data
 
     def initialize(

data/lib/stripe/params/payment_intent_list_params.rb

@@ -24,7 +24,7 @@ module Stripe
     attr_accessor :created
     # Only return PaymentIntents for the customer that this customer ID specifies.
     attr_accessor :customer
-    # Only return PaymentIntents for the account that this ID specifies.
+    # Only return PaymentIntents for the account representing the customer that this ID specifies.
     attr_accessor :customer_account
     # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
     attr_accessor :ending_before