stripe 18.1.0.pre.alpha.4 → 18.1.0

data/lib/stripe/resources/issuing/card.rb

@@ -3,7 +3,7 @@
 
 module Stripe
   module Issuing
-    # You can [create physical or virtual cards](https://stripe.com/docs/issuing) that are issued to cardholders.
+    # You can [create physical or virtual cards](https://docs.stripe.com/issuing) that are issued to cardholders.
     class Card < APIResource
       extend Stripe::APIOperations::Create
       extend Stripe::APIOperations::List
@@ -41,7 +41,7 @@ module Stripe
           attr_reader :line2
           # ZIP or postal code.
           attr_reader :postal_code
-          # State, county, province, or region.
+          # State, county, province, or region ([ISO 3166-2](https://en.wikipedia.org/wiki/ISO_3166-2)).
           attr_reader :state
 
           def self.inner_class_types
@@ -65,7 +65,7 @@ module Stripe
             attr_reader :line2
             # ZIP or postal code.
             attr_reader :postal_code
-            # State, county, province, or region.
+            # State, county, province, or region ([ISO 3166-2](https://en.wikipedia.org/wiki/ISO_3166-2)).
             attr_reader :state
 
             def self.inner_class_types
@@ -146,9 +146,9 @@ module Stripe
 
       class SpendingControls < ::Stripe::StripeObject
         class SpendingLimit < ::Stripe::StripeObject
-          # Maximum amount allowed to spend per interval. This amount is in the card's currency and in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal).
+          # Maximum amount allowed to spend per interval. This amount is in the card's currency and in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal).
           attr_reader :amount
-          # Array of strings containing [categories](https://stripe.com/docs/api#issuing_authorization_object-merchant_data-category) this limit applies to. Omitting this field will apply the limit to all categories.
+          # Array of strings containing [categories](https://docs.stripe.com/api#issuing_authorization_object-merchant_data-category) this limit applies to. Omitting this field will apply the limit to all categories.
           attr_reader :categories
           # Interval (or event) to which the amount applies.
           attr_reader :interval
@@ -161,11 +161,11 @@ module Stripe
             @field_remappings = {}
           end
         end
-        # Array of strings containing [categories](https://stripe.com/docs/api#issuing_authorization_object-merchant_data-category) of authorizations to allow. All other categories will be blocked. Cannot be set with `blocked_categories`.
+        # Array of strings containing [categories](https://docs.stripe.com/api#issuing_authorization_object-merchant_data-category) of authorizations to allow. All other categories will be blocked. Cannot be set with `blocked_categories`.
         attr_reader :allowed_categories
         # Array of strings containing representing countries from which authorizations will be allowed. Authorizations from merchants in all other countries will be declined. Country codes should be ISO 3166 alpha-2 country codes (e.g. `US`). Cannot be set with `blocked_merchant_countries`. Provide an empty value to unset this control.
         attr_reader :allowed_merchant_countries
-        # Array of strings containing [categories](https://stripe.com/docs/api#issuing_authorization_object-merchant_data-category) of authorizations to decline. All other categories will be allowed. Cannot be set with `allowed_categories`.
+        # Array of strings containing [categories](https://docs.stripe.com/api#issuing_authorization_object-merchant_data-category) of authorizations to decline. All other categories will be allowed. Cannot be set with `allowed_categories`.
         attr_reader :blocked_categories
         # Array of strings containing representing countries from which authorizations will be declined. Country codes should be ISO 3166 alpha-2 country codes (e.g. `US`). Cannot be set with `allowed_merchant_countries`. Provide an empty value to unset this control.
         attr_reader :blocked_merchant_countries
@@ -232,15 +232,15 @@ module Stripe
       attr_reader :brand
       # The reason why the card was canceled.
       attr_reader :cancellation_reason
-      # An Issuing `Cardholder` object represents an individual or business entity who is [issued](https://stripe.com/docs/issuing) cards.
+      # An Issuing `Cardholder` object represents an individual or business entity who is [issued](https://docs.stripe.com/issuing) cards.
       #
-      # Related guide: [How to create a cardholder](https://stripe.com/docs/issuing/cards/virtual/issue-cards#create-cardholder)
+      # Related guide: [How to create a cardholder](https://docs.stripe.com/issuing/cards/virtual/issue-cards#create-cardholder)
       attr_reader :cardholder
       # Time at which the object was created. Measured in seconds since the Unix epoch.
       attr_reader :created
       # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Supported currencies are `usd` in the US, `eur` in the EU, and `gbp` in the UK.
       attr_reader :currency
-      # The card's CVC. For security reasons, this is only available for virtual cards, and will be omitted unless you explicitly request it with [the `expand` parameter](https://stripe.com/docs/api/expanding_objects). Additionally, it's only available via the ["Retrieve a card" endpoint](https://stripe.com/docs/api/issuing/cards/retrieve), not via "List all cards" or any other endpoint.
+      # The card's CVC. For security reasons, this is only available for virtual cards, and will be omitted unless you explicitly request it with [the `expand` parameter](https://docs.stripe.com/api/expanding_objects). Additionally, it's only available via the ["Retrieve a card" endpoint](https://docs.stripe.com/api/issuing/cards/retrieve), not via "List all cards" or any other endpoint.
       attr_reader :cvc
       # The expiration month of the card.
       attr_reader :exp_month
@@ -256,9 +256,9 @@ module Stripe
       attr_reader :latest_fraud_warning
       # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
       attr_reader :livemode
-      # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
+      # Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
       attr_reader :metadata
-      # The full unredacted card number. For security reasons, this is only available for virtual cards, and will be omitted unless you explicitly request it with [the `expand` parameter](https://stripe.com/docs/api/expanding_objects). Additionally, it's only available via the ["Retrieve a card" endpoint](https://stripe.com/docs/api/issuing/cards/retrieve), not via "List all cards" or any other endpoint.
+      # The full unredacted card number. For security reasons, this is only available for virtual cards, and will be omitted unless you explicitly request it with [the `expand` parameter](https://docs.stripe.com/api/expanding_objects). Additionally, it's only available via the ["Retrieve a card" endpoint](https://docs.stripe.com/api/issuing/cards/retrieve), not via "List all cards" or any other endpoint.
       attr_reader :number
       # String representing the object's type. Objects of the same type share the same value.
       attr_reader :object

data/lib/stripe/resources/issuing/cardholder.rb

@@ -3,9 +3,9 @@
 
 module Stripe
   module Issuing
-    # An Issuing `Cardholder` object represents an individual or business entity who is [issued](https://stripe.com/docs/issuing) cards.
+    # An Issuing `Cardholder` object represents an individual or business entity who is [issued](https://docs.stripe.com/issuing) cards.
     #
-    # Related guide: [How to create a cardholder](https://stripe.com/docs/issuing/cards/virtual/issue-cards#create-cardholder)
+    # Related guide: [How to create a cardholder](https://docs.stripe.com/issuing/cards/virtual/issue-cards#create-cardholder)
     class Cardholder < APIResource
       extend Stripe::APIOperations::Create
       extend Stripe::APIOperations::List
@@ -28,7 +28,7 @@ module Stripe
           attr_reader :line2
           # ZIP or postal code.
           attr_reader :postal_code
-          # State, county, province, or region.
+          # State, county, province, or region ([ISO 3166-2](https://en.wikipedia.org/wiki/ISO_3166-2)).
           attr_reader :state
 
           def self.inner_class_types
@@ -113,9 +113,9 @@ module Stripe
 
         class Verification < ::Stripe::StripeObject
           class Document < ::Stripe::StripeObject
-            # The back of a document returned by a [file upload](https://stripe.com/docs/api#create_file) with a `purpose` value of `identity_document`.
+            # The back of a document returned by a [file upload](https://api.stripe.com#create_file) with a `purpose` value of `identity_document`.
             attr_reader :back
-            # The front of a document returned by a [file upload](https://stripe.com/docs/api#create_file) with a `purpose` value of `identity_document`.
+            # The front of a document returned by a [file upload](https://api.stripe.com#create_file) with a `purpose` value of `identity_document`.
             attr_reader :front
 
             def self.inner_class_types
@@ -174,9 +174,9 @@ module Stripe
 
       class SpendingControls < ::Stripe::StripeObject
         class SpendingLimit < ::Stripe::StripeObject
-          # Maximum amount allowed to spend per interval. This amount is in the card's currency and in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal).
+          # Maximum amount allowed to spend per interval. This amount is in the card's currency and in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal).
           attr_reader :amount
-          # Array of strings containing [categories](https://stripe.com/docs/api#issuing_authorization_object-merchant_data-category) this limit applies to. Omitting this field will apply the limit to all categories.
+          # Array of strings containing [categories](https://docs.stripe.com/api#issuing_authorization_object-merchant_data-category) this limit applies to. Omitting this field will apply the limit to all categories.
           attr_reader :categories
           # Interval (or event) to which the amount applies.
           attr_reader :interval
@@ -189,11 +189,11 @@ module Stripe
             @field_remappings = {}
           end
         end
-        # Array of strings containing [categories](https://stripe.com/docs/api#issuing_authorization_object-merchant_data-category) of authorizations to allow. All other categories will be blocked. Cannot be set with `blocked_categories`.
+        # Array of strings containing [categories](https://docs.stripe.com/api#issuing_authorization_object-merchant_data-category) of authorizations to allow. All other categories will be blocked. Cannot be set with `blocked_categories`.
         attr_reader :allowed_categories
         # Array of strings containing representing countries from which authorizations will be allowed. Authorizations from merchants in all other countries will be declined. Country codes should be ISO 3166 alpha-2 country codes (e.g. `US`). Cannot be set with `blocked_merchant_countries`. Provide an empty value to unset this control.
         attr_reader :allowed_merchant_countries
-        # Array of strings containing [categories](https://stripe.com/docs/api#issuing_authorization_object-merchant_data-category) of authorizations to decline. All other categories will be allowed. Cannot be set with `allowed_categories`.
+        # Array of strings containing [categories](https://docs.stripe.com/api#issuing_authorization_object-merchant_data-category) of authorizations to decline. All other categories will be allowed. Cannot be set with `allowed_categories`.
         attr_reader :blocked_categories
         # Array of strings containing representing countries from which authorizations will be declined. Country codes should be ISO 3166 alpha-2 country codes (e.g. `US`). Cannot be set with `allowed_merchant_countries`. Provide an empty value to unset this control.
         attr_reader :blocked_merchant_countries
@@ -224,24 +224,24 @@ module Stripe
       attr_reader :individual
       # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
       attr_reader :livemode
-      # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
+      # Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
       attr_reader :metadata
       # The cardholder's name. This will be printed on cards issued to them.
       attr_reader :name
       # String representing the object's type. Objects of the same type share the same value.
       attr_reader :object
-      # The cardholder's phone number. This is required for all cardholders who will be creating EU cards. See the [3D Secure documentation](https://stripe.com/docs/issuing/3d-secure#when-is-3d-secure-applied) for more details.
+      # The cardholder's phone number. This is required for all cardholders who will be creating EU cards. See the [3D Secure documentation](https://docs.stripe.com/issuing/3d-secure#when-is-3d-secure-applied) for more details.
       attr_reader :phone_number
       # The cardholder’s preferred locales (languages), ordered by preference. Locales can be `de`, `en`, `es`, `fr`, or `it`.
-      #  This changes the language of the [3D Secure flow](https://stripe.com/docs/issuing/3d-secure) and one-time password messages sent to the cardholder.
+      #  This changes the language of the [3D Secure flow](https://docs.stripe.com/issuing/3d-secure) and one-time password messages sent to the cardholder.
       attr_reader :preferred_locales
       # Attribute for field requirements
       attr_reader :requirements
-      # Rules that control spending across this cardholder's cards. Refer to our [documentation](https://stripe.com/docs/issuing/controls/spending-controls) for more details.
+      # Rules that control spending across this cardholder's cards. Refer to our [documentation](https://docs.stripe.com/issuing/controls/spending-controls) for more details.
       attr_reader :spending_controls
       # Specifies whether to permit authorizations on this cardholder's cards.
       attr_reader :status
-      # One of `individual` or `company`. See [Choose a cardholder type](https://stripe.com/docs/issuing/other/choose-cardholder) for more details.
+      # One of `individual` or `company`. See [Choose a cardholder type](https://docs.stripe.com/issuing/other/choose-cardholder) for more details.
       attr_reader :type
 
       # Creates a new Issuing Cardholder object that can be issued cards.

data/lib/stripe/resources/issuing/dispute.rb

@@ -3,9 +3,9 @@
 
 module Stripe
   module Issuing
-    # As a [card issuer](https://stripe.com/docs/issuing), you can dispute transactions that the cardholder does not recognize, suspects to be fraudulent, or has other issues with.
+    # As a [card issuer](https://docs.stripe.com/issuing), you can dispute transactions that the cardholder does not recognize, suspects to be fraudulent, or has other issues with.
     #
-    # Related guide: [Issuing disputes](https://stripe.com/docs/issuing/purchases/disputes)
+    # Related guide: [Issuing disputes](https://docs.stripe.com/issuing/purchases/disputes)
     class Dispute < APIResource
       extend Stripe::APIOperations::Create
       extend Stripe::APIOperations::List
@@ -222,9 +222,9 @@ module Stripe
       end
 
       class Treasury < ::Stripe::StripeObject
-        # The Treasury [DebitReversal](https://stripe.com/docs/api/treasury/debit_reversals) representing this Issuing dispute
+        # The Treasury [DebitReversal](https://docs.stripe.com/api/treasury/debit_reversals) representing this Issuing dispute
         attr_reader :debit_reversal
-        # The Treasury [ReceivedDebit](https://stripe.com/docs/api/treasury/received_debits) that is being disputed.
+        # The Treasury [ReceivedDebit](https://docs.stripe.com/api/treasury/received_debits) that is being disputed.
         attr_reader :received_debit
 
         def self.inner_class_types
@@ -235,7 +235,7 @@ module Stripe
           @field_remappings = {}
         end
       end
-      # Disputed amount in the card's currency and in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal). Usually the amount of the `transaction`, but can differ (usually because of currency fluctuation).
+      # Disputed amount in the card's currency and in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). Usually the amount of the `transaction`, but can differ (usually because of currency fluctuation).
       attr_reader :amount
       # List of balance transactions associated with the dispute.
       attr_reader :balance_transactions
@@ -251,7 +251,7 @@ module Stripe
       attr_reader :livemode
       # The enum that describes the dispute loss outcome. If the dispute is not lost, this field will be absent. New enum values may be added in the future, so be sure to handle unknown values.
       attr_reader :loss_reason
-      # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
+      # Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
       attr_reader :metadata
       # String representing the object's type. Objects of the same type share the same value.
       attr_reader :object
@@ -259,7 +259,7 @@ module Stripe
       attr_reader :status
       # The transaction being disputed.
       attr_reader :transaction
-      # [Treasury](https://stripe.com/docs/api/treasury) details related to this dispute if it was created on a [FinancialAccount](/docs/api/treasury/financial_accounts
+      # [Treasury](https://docs.stripe.com/api/treasury) details related to this dispute if it was created on a [FinancialAccount](/docs/api/treasury/financial_accounts
       attr_reader :treasury
 
       # Creates an Issuing Dispute object. Individual pieces of evidence within the evidence object are optional at this point. Stripe only validates that required evidence is present during submission. Refer to [Dispute reasons and evidence](https://docs.stripe.com/docs/issuing/purchases/disputes#dispute-reasons-and-evidence) for more details about evidence requirements.

data/lib/stripe/resources/issuing/personalization_design.rb

@@ -74,7 +74,7 @@ module Stripe
       attr_reader :livemode
       # A lookup key used to retrieve personalization designs dynamically from a static string. This may be up to 200 characters.
       attr_reader :lookup_key
-      # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
+      # Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
       attr_reader :metadata
       # Friendly display name.
       attr_reader :name

data/lib/stripe/resources/issuing/token.rb

@@ -3,7 +3,7 @@
 
 module Stripe
   module Issuing
-    # An issuing token object is created when an issued card is added to a digital wallet. As a [card issuer](https://stripe.com/docs/issuing), you can [view and manage these tokens](https://stripe.com/docs/issuing/controls/token-management) through Stripe.
+    # An issuing token object is created when an issued card is added to a digital wallet. As a [card issuer](https://docs.stripe.com/issuing), you can [view and manage these tokens](https://docs.stripe.com/issuing/controls/token-management) through Stripe.
     class Token < APIResource
       extend Stripe::APIOperations::List
       include Stripe::APIOperations::Save

data/lib/stripe/resources/issuing/transaction.rb

@@ -3,11 +3,11 @@
 
 module Stripe
   module Issuing
-    # Any use of an [issued card](https://stripe.com/docs/issuing) that results in funds entering or leaving
+    # Any use of an [issued card](https://docs.stripe.com/issuing) that results in funds entering or leaving
     # your Stripe account, such as a completed purchase or refund, is represented by an Issuing
     # `Transaction` object.
     #
-    # Related guide: [Issued card transactions](https://stripe.com/docs/issuing/purchases/transactions)
+    # Related guide: [Issued card transactions](https://docs.stripe.com/issuing/purchases/transactions)
     class Transaction < APIResource
       extend Stripe::APIOperations::List
       include Stripe::APIOperations::Save
@@ -33,7 +33,7 @@ module Stripe
       end
 
       class MerchantData < ::Stripe::StripeObject
-        # A categorization of the seller's type of business. See our [merchant categories guide](https://stripe.com/docs/issuing/merchant-categories) for a list of possible values.
+        # A categorization of the seller's type of business. See our [merchant categories guide](https://docs.stripe.com/issuing/merchant-categories) for a list of possible values.
         attr_reader :category
         # The merchant category code for the seller’s business
         attr_reader :category_code
@@ -308,9 +308,9 @@ module Stripe
       end
 
       class Treasury < ::Stripe::StripeObject
-        # The Treasury [ReceivedCredit](https://stripe.com/docs/api/treasury/received_credits) representing this Issuing transaction if it is a refund
+        # The Treasury [ReceivedCredit](https://docs.stripe.com/api/treasury/received_credits) representing this Issuing transaction if it is a refund
         attr_reader :received_credit
-        # The Treasury [ReceivedDebit](https://stripe.com/docs/api/treasury/received_debits) representing this Issuing transaction if it is a capture
+        # The Treasury [ReceivedDebit](https://docs.stripe.com/api/treasury/received_debits) representing this Issuing transaction if it is a capture
         attr_reader :received_debit
 
         def self.inner_class_types
@@ -321,13 +321,13 @@ module Stripe
           @field_remappings = {}
         end
       end
-      # The transaction amount, which will be reflected in your balance. This amount is in your currency and in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal).
+      # The transaction amount, which will be reflected in your balance. This amount is in your currency and in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal).
       attr_reader :amount
-      # Detailed breakdown of amount components. These amounts are denominated in `currency` and in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal).
+      # Detailed breakdown of amount components. These amounts are denominated in `currency` and in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal).
       attr_reader :amount_details
       # The `Authorization` object that led to this transaction.
       attr_reader :authorization
-      # ID of the [balance transaction](https://stripe.com/docs/api/balance_transactions) associated with this transaction.
+      # ID of the [balance transaction](https://docs.stripe.com/api/balance_transactions) associated with this transaction.
       attr_reader :balance_transaction
       # The card used to make this transaction.
       attr_reader :card
@@ -343,13 +343,13 @@ module Stripe
       attr_reader :id
       # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
       attr_reader :livemode
-      # The amount that the merchant will receive, denominated in `merchant_currency` and in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal). It will be different from `amount` if the merchant is taking payment in a different currency.
+      # The amount that the merchant will receive, denominated in `merchant_currency` and in the [smallest currency unit](https://docs.stripe.com/currencies#zero-decimal). It will be different from `amount` if the merchant is taking payment in a different currency.
       attr_reader :merchant_amount
       # The currency with which the merchant is taking payment.
       attr_reader :merchant_currency
       # Attribute for field merchant_data
       attr_reader :merchant_data
-      # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
+      # Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
       attr_reader :metadata
       # Details about the transaction, such as processing dates, set by the card network.
       attr_reader :network_data
@@ -357,11 +357,9 @@ module Stripe
       attr_reader :object
       # Additional purchase information that is optionally provided by the merchant.
       attr_reader :purchase_details
-      # The ID of the [settlement](https://stripe.com/docs/api/issuing/settlements) to which this transaction belongs.
-      attr_reader :settlement
-      # [Token](https://stripe.com/docs/api/issuing/tokens/object) object used for this transaction. If a network token was not used for this transaction, this field will be null.
+      # [Token](https://docs.stripe.com/api/issuing/tokens/object) object used for this transaction. If a network token was not used for this transaction, this field will be null.
       attr_reader :token
-      # [Treasury](https://stripe.com/docs/api/treasury) details related to this transaction if it was created on a [FinancialAccount](/docs/api/treasury/financial_accounts
+      # [Treasury](https://docs.stripe.com/api/treasury) details related to this transaction if it was created on a [FinancialAccount](/docs/api/treasury/financial_accounts
       attr_reader :treasury
       # The nature of the transaction.
       attr_reader :type

data/lib/stripe/resources/line_item.rb

@@ -9,30 +9,13 @@ module Stripe
       "item"
     end
 
-    class AdjustableQuantity < ::Stripe::StripeObject
-      # Attribute for field enabled
-      attr_reader :enabled
-      # Attribute for field maximum
-      attr_reader :maximum
-      # Attribute for field minimum
-      attr_reader :minimum
-
-      def self.inner_class_types
-        @inner_class_types = {}
-      end
-
-      def self.field_remappings
-        @field_remappings = {}
-      end
-    end
-
     class Discount < ::Stripe::StripeObject
       # The amount discounted.
       attr_reader :amount
-      # A discount represents the actual application of a [coupon](https://stripe.com/docs/api#coupons) or [promotion code](https://stripe.com/docs/api#promotion_codes).
+      # A discount represents the actual application of a [coupon](https://api.stripe.com#coupons) or [promotion code](https://api.stripe.com#promotion_codes).
       # It contains information about when the discount began, when it will end, and what it is applied to.
       #
-      # Related guide: [Applying discounts to subscriptions](https://stripe.com/docs/billing/subscriptions/discounts)
+      # Related guide: [Applying discounts to subscriptions](https://docs.stripe.com/billing/subscriptions/discounts)
       attr_reader :discount
 
       def self.inner_class_types
@@ -44,38 +27,6 @@ module Stripe
       end
     end
 
-    class Display < ::Stripe::StripeObject
-      # Attribute for field description
-      attr_reader :description
-      # Attribute for field images
-      attr_reader :images
-      # Attribute for field name
-      attr_reader :name
-
-      def self.inner_class_types
-        @inner_class_types = {}
-      end
-
-      def self.field_remappings
-        @field_remappings = {}
-      end
-    end
-
-    class TaxCalculationReference < ::Stripe::StripeObject
-      # The calculation identifier for tax calculation response.
-      attr_reader :calculation_id
-      # The calculation identifier for tax calculation response line item.
-      attr_reader :calculation_item_id
-
-      def self.inner_class_types
-        @inner_class_types = {}
-      end
-
-      def self.field_remappings
-        @field_remappings = {}
-      end
-    end
-
     class Tax < ::Stripe::StripeObject
       # Amount of tax applied for this rate.
       attr_reader :amount
@@ -96,8 +47,6 @@ module Stripe
         @field_remappings = {}
       end
     end
-    # Attribute for field adjustable_quantity
-    attr_reader :adjustable_quantity
     # Total discount amount applied. If no discounts were applied, defaults to 0.
     attr_reader :amount_discount
     # Total before any discounts or taxes are applied.
@@ -112,35 +61,21 @@ module Stripe
     attr_reader :description
     # The discounts applied to the line item.
     attr_reader :discounts
-    # Attribute for field display
-    attr_reader :display
     # Unique identifier for the object.
     attr_reader :id
-    # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
+    # Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
     attr_reader :metadata
     # String representing the object's type. Objects of the same type share the same value.
     attr_reader :object
     # The price used to generate the line item.
     attr_reader :price
-    # The ID of the product for this line item.
-    #
-    # This will always be the same as `price.product`.
-    attr_reader :product
     # The quantity of products being purchased.
     attr_reader :quantity
-    # The tax calculation identifiers of the line item.
-    attr_reader :tax_calculation_reference
     # The taxes applied to the line item.
     attr_reader :taxes
 
     def self.inner_class_types
-      @inner_class_types = {
-        adjustable_quantity: AdjustableQuantity,
-        discounts: Discount,
-        display: Display,
-        tax_calculation_reference: TaxCalculationReference,
-        taxes: Tax,
-      }
+      @inner_class_types = { discounts: Discount, taxes: Tax }
     end
 
     def self.field_remappings

data/lib/stripe/resources/login_link.rb

@@ -3,7 +3,7 @@
 
 module Stripe
   # Login Links are single-use URLs that takes an Express account to the login page for their Stripe dashboard.
-  # A Login Link differs from an [Account Link](https://stripe.com/docs/api/account_links) in that it takes the user directly to their [Express dashboard for the specified account](https://stripe.com/docs/connect/integrate-express-dashboard#create-login-link)
+  # A Login Link differs from an [Account Link](https://docs.stripe.com/api/account_links) in that it takes the user directly to their [Express dashboard for the specified account](https://docs.stripe.com/connect/integrate-express-dashboard#create-login-link)
   class LoginLink < APIResource
     OBJECT_NAME = "login_link"
     def self.object_name

data/lib/stripe/resources/mandate.rb

@@ -4,8 +4,6 @@
 module Stripe
   # A Mandate is a record of the permission that your customer gives you to debit their payment method.
   class Mandate < APIResource
-    extend Stripe::APIOperations::List
-
     OBJECT_NAME = "mandate"
     def self.object_name
       "mandate"
@@ -55,11 +53,6 @@ module Stripe
     end
 
     class MultiUse < ::Stripe::StripeObject
-      # The amount of the payment on a multi use mandate.
-      attr_reader :amount
-      # The currency of the payment on a multi use mandate.
-      attr_reader :currency
-
       def self.inner_class_types
         @inner_class_types = {}
       end
@@ -214,13 +207,8 @@ module Stripe
       class Paypal < ::Stripe::StripeObject
         # The PayPal Billing Agreement ID (BAID). This is an ID generated by PayPal which represents the mandate between the merchant and the customer.
         attr_reader :billing_agreement_id
-        # Uniquely identifies this particular PayPal account. You can use this attribute to check whether two PayPal accounts are the same.
-        attr_reader :fingerprint
         # PayPal account PayerID. This identifier uniquely identifies the PayPal customer.
         attr_reader :payer_id
-        # Owner's verified email. Values are verified or provided by PayPal directly
-        # (if supported) at the time of authorization or settlement. They cannot be set or mutated.
-        attr_reader :verified_email
 
         def self.inner_class_types
           @inner_class_types = {}
@@ -256,29 +244,6 @@ module Stripe
         end
       end
 
-      class Pix < ::Stripe::StripeObject
-        # Determines if the amount includes the IOF tax.
-        attr_reader :amount_includes_iof
-        # Type of amount.
-        attr_reader :amount_type
-        # Date when the mandate expires and no further payments will be charged, in `YYYY-MM-DD`.
-        attr_reader :end_date
-        # Schedule at which the future payments will be charged.
-        attr_reader :payment_schedule
-        # Subscription name displayed to buyers in their bank app.
-        attr_reader :reference
-        # Start date of the mandate, in `YYYY-MM-DD`.
-        attr_reader :start_date
-
-        def self.inner_class_types
-          @inner_class_types = {}
-        end
-
-        def self.field_remappings
-          @field_remappings = {}
-        end
-      end
-
       class RevolutPay < ::Stripe::StripeObject
         def self.inner_class_types
           @inner_class_types = {}
@@ -344,8 +309,6 @@ module Stripe
       attr_reader :paypal
       # Attribute for field payto
       attr_reader :payto
-      # Attribute for field pix
-      attr_reader :pix
       # Attribute for field revolut_pay
       attr_reader :revolut_pay
       # Attribute for field sepa_debit
@@ -371,7 +334,6 @@ module Stripe
           nz_bank_account: NzBankAccount,
           paypal: Paypal,
           payto: Payto,
-          pix: Pix,
           revolut_pay: RevolutPay,
           sepa_debit: SepaDebit,
           us_bank_account: UsBankAccount,
@@ -420,11 +382,6 @@ module Stripe
     # The type of the mandate.
     attr_reader :type
 
-    # Retrieves a list of Mandates for a given PaymentMethod.
-    def self.list(params = {}, opts = {})
-      request_stripe_object(method: :get, path: "/v1/mandates", params: params, opts: opts)
-    end
-
     def self.inner_class_types
       @inner_class_types = {
         customer_acceptance: CustomerAcceptance,