stripe 18.0.0 → 18.1.0.pre.alpha.2

data/lib/stripe/params/subscription_update_params.rb

@@ -5,16 +5,44 @@ module Stripe
   class SubscriptionUpdateParams < ::Stripe::RequestParams
     class AddInvoiceItem < ::Stripe::RequestParams
       class Discount < ::Stripe::RequestParams
+        class DiscountEnd < ::Stripe::RequestParams
+          class Duration < ::Stripe::RequestParams
+            # Specifies a type of interval unit. Either `day`, `week`, `month` or `year`.
+            attr_accessor :interval
+            # The number of intervals, as an whole number greater than 0. Stripe multiplies this by the interval type to get the overall duration.
+            attr_accessor :interval_count
+
+            def initialize(interval: nil, interval_count: nil)
+              @interval = interval
+              @interval_count = interval_count
+            end
+          end
+          # Time span for the redeemed discount.
+          attr_accessor :duration
+          # A precise Unix timestamp for the discount to end. Must be in the future.
+          attr_accessor :timestamp
+          # The type of calculation made to determine when the discount ends.
+          attr_accessor :type
+
+          def initialize(duration: nil, timestamp: nil, type: nil)
+            @duration = duration
+            @timestamp = timestamp
+            @type = type
+          end
+        end
         # ID of the coupon to create a new discount for.
         attr_accessor :coupon
         # ID of an existing discount on the object (or one of its ancestors) to reuse.
         attr_accessor :discount
+        # Details to determine how long the discount should be applied for.
+        attr_accessor :discount_end
         # ID of the promotion code to create a new discount for.
         attr_accessor :promotion_code
 
-        def initialize(coupon: nil, discount: nil, promotion_code: nil)
+        def initialize(coupon: nil, discount: nil, discount_end: nil, promotion_code: nil)
           @coupon = coupon
           @discount = discount
+          @discount_end = discount_end
           @promotion_code = promotion_code
         end
       end
@@ -137,6 +165,58 @@ module Stripe
       end
     end
 
+    class BillingSchedule < ::Stripe::RequestParams
+      class AppliesTo < ::Stripe::RequestParams
+        # The ID of the price object.
+        attr_accessor :price
+        # Controls which subscription items the billing schedule applies to.
+        attr_accessor :type
+
+        def initialize(price: nil, type: nil)
+          @price = price
+          @type = type
+        end
+      end
+
+      class BillUntil < ::Stripe::RequestParams
+        class Duration < ::Stripe::RequestParams
+          # Specifies billing duration. Either `day`, `week`, `month` or `year`.
+          attr_accessor :interval
+          # The multiplier applied to the interval.
+          attr_accessor :interval_count
+
+          def initialize(interval: nil, interval_count: nil)
+            @interval = interval
+            @interval_count = interval_count
+          end
+        end
+        # Specifies the billing period.
+        attr_accessor :duration
+        # The end date of the billing schedule.
+        attr_accessor :timestamp
+        # Describes how the billing schedule will determine the end date. Either `duration` or `timestamp`.
+        attr_accessor :type
+
+        def initialize(duration: nil, timestamp: nil, type: nil)
+          @duration = duration
+          @timestamp = timestamp
+          @type = type
+        end
+      end
+      # Configure billing schedule differently for individual subscription items.
+      attr_accessor :applies_to
+      # The end date for the billing schedule.
+      attr_accessor :bill_until
+      # Specify a key for the billing schedule. Must be unique to this field, alphanumeric, and up to 200 characters. If not provided, a unique key will be generated.
+      attr_accessor :key
+
+      def initialize(applies_to: nil, bill_until: nil, key: nil)
+        @applies_to = applies_to
+        @bill_until = bill_until
+        @key = key
+      end
+    end
+
     class BillingThresholds < ::Stripe::RequestParams
       # Monetary threshold that triggers the subscription to advance to a new billing period
       attr_accessor :amount_gte
@@ -162,16 +242,44 @@ module Stripe
     end
 
     class Discount < ::Stripe::RequestParams
+      class DiscountEnd < ::Stripe::RequestParams
+        class Duration < ::Stripe::RequestParams
+          # Specifies a type of interval unit. Either `day`, `week`, `month` or `year`.
+          attr_accessor :interval
+          # The number of intervals, as an whole number greater than 0. Stripe multiplies this by the interval type to get the overall duration.
+          attr_accessor :interval_count
+
+          def initialize(interval: nil, interval_count: nil)
+            @interval = interval
+            @interval_count = interval_count
+          end
+        end
+        # Time span for the redeemed discount.
+        attr_accessor :duration
+        # A precise Unix timestamp for the discount to end. Must be in the future.
+        attr_accessor :timestamp
+        # The type of calculation made to determine when the discount ends.
+        attr_accessor :type
+
+        def initialize(duration: nil, timestamp: nil, type: nil)
+          @duration = duration
+          @timestamp = timestamp
+          @type = type
+        end
+      end
       # ID of the coupon to create a new discount for.
       attr_accessor :coupon
       # ID of an existing discount on the object (or one of its ancestors) to reuse.
       attr_accessor :discount
+      # Details to determine how long the discount should be applied for.
+      attr_accessor :discount_end
       # ID of the promotion code to create a new discount for.
       attr_accessor :promotion_code
 
-      def initialize(coupon: nil, discount: nil, promotion_code: nil)
+      def initialize(coupon: nil, discount: nil, discount_end: nil, promotion_code: nil)
         @coupon = coupon
         @discount = discount
+        @discount_end = discount_end
         @promotion_code = promotion_code
       end
     end
@@ -209,17 +317,57 @@ module Stripe
         end
       end
 
+      class CurrentTrial < ::Stripe::RequestParams
+        # Unix timestamp representing the end of the trial offer period. Required when the trial offer has `duration.type=timestamp`. Cannot be specified when `duration.type=relative`.
+        attr_accessor :trial_end
+        # The ID of the trial offer to apply to the subscription item.
+        attr_accessor :trial_offer
+
+        def initialize(trial_end: nil, trial_offer: nil)
+          @trial_end = trial_end
+          @trial_offer = trial_offer
+        end
+      end
+
       class Discount < ::Stripe::RequestParams
+        class DiscountEnd < ::Stripe::RequestParams
+          class Duration < ::Stripe::RequestParams
+            # Specifies a type of interval unit. Either `day`, `week`, `month` or `year`.
+            attr_accessor :interval
+            # The number of intervals, as an whole number greater than 0. Stripe multiplies this by the interval type to get the overall duration.
+            attr_accessor :interval_count
+
+            def initialize(interval: nil, interval_count: nil)
+              @interval = interval
+              @interval_count = interval_count
+            end
+          end
+          # Time span for the redeemed discount.
+          attr_accessor :duration
+          # A precise Unix timestamp for the discount to end. Must be in the future.
+          attr_accessor :timestamp
+          # The type of calculation made to determine when the discount ends.
+          attr_accessor :type
+
+          def initialize(duration: nil, timestamp: nil, type: nil)
+            @duration = duration
+            @timestamp = timestamp
+            @type = type
+          end
+        end
         # ID of the coupon to create a new discount for.
         attr_accessor :coupon
         # ID of an existing discount on the object (or one of its ancestors) to reuse.
         attr_accessor :discount
+        # Details to determine how long the discount should be applied for.
+        attr_accessor :discount_end
         # ID of the promotion code to create a new discount for.
         attr_accessor :promotion_code
 
-        def initialize(coupon: nil, discount: nil, promotion_code: nil)
+        def initialize(coupon: nil, discount: nil, discount_end: nil, promotion_code: nil)
           @coupon = coupon
           @discount = discount
+          @discount_end = discount_end
           @promotion_code = promotion_code
         end
       end
@@ -287,6 +435,8 @@ module Stripe
       attr_accessor :quantity
       # A list of [Tax Rate](https://stripe.com/docs/api/tax_rates) ids. These Tax Rates will override the [`default_tax_rates`](https://stripe.com/docs/api/subscriptions/create#create_subscription-default_tax_rates) on the Subscription. When updating, pass an empty string to remove previously-defined tax rates.
       attr_accessor :tax_rates
+      # The trial offer to apply to this subscription item.
+      attr_accessor :current_trial
 
       def initialize(
         billing_thresholds: nil,
@@ -299,7 +449,8 @@ module Stripe
         price: nil,
         price_data: nil,
         quantity: nil,
-        tax_rates: nil
+        tax_rates: nil,
+        current_trial: nil
       )
         @billing_thresholds = billing_thresholds
         @clear_usage = clear_usage
@@ -312,6 +463,7 @@ module Stripe
         @price_data = price_data
         @quantity = quantity
         @tax_rates = tax_rates
+        @current_trial = current_trial
       end
     end
 
@@ -418,17 +570,79 @@ module Stripe
           end
         end
 
+        class IdBankTransfer < ::Stripe::RequestParams; end
         class Konbini < ::Stripe::RequestParams; end
+
+        class Pix < ::Stripe::RequestParams
+          class MandateOptions < ::Stripe::RequestParams
+            # Amount to be charged for future payments. If not provided, defaults to 40000.
+            attr_accessor :amount
+            # Determines if the amount includes the IOF tax. Defaults to `never`.
+            attr_accessor :amount_includes_iof
+            # Date when the mandate expires and no further payments will be charged, in `YYYY-MM-DD`. If not provided, the mandate will be active until canceled.
+            attr_accessor :end_date
+            # Schedule at which the future payments will be charged. Defaults to `weekly`.
+            attr_accessor :payment_schedule
+
+            def initialize(
+              amount: nil,
+              amount_includes_iof: nil,
+              end_date: nil,
+              payment_schedule: nil
+            )
+              @amount = amount
+              @amount_includes_iof = amount_includes_iof
+              @end_date = end_date
+              @payment_schedule = payment_schedule
+            end
+          end
+          # Configuration options for setting up a mandate
+          attr_accessor :mandate_options
+
+          def initialize(mandate_options: nil)
+            @mandate_options = mandate_options
+          end
+        end
+
         class SepaDebit < ::Stripe::RequestParams; end
 
+        class Upi < ::Stripe::RequestParams
+          class MandateOptions < ::Stripe::RequestParams
+            # Amount to be charged for future payments.
+            attr_accessor :amount
+            # One of `fixed` or `maximum`. If `fixed`, the `amount` param refers to the exact amount to be charged in future payments. If `maximum`, the amount charged can be up to the value passed for the `amount` param.
+            attr_accessor :amount_type
+            # A description of the mandate or subscription that is meant to be displayed to the customer.
+            attr_accessor :description
+            # End date of the mandate or subscription. If not provided, the mandate will be active until canceled. If provided, end date should be after start date.
+            attr_accessor :end_date
+
+            def initialize(amount: nil, amount_type: nil, description: nil, end_date: nil)
+              @amount = amount
+              @amount_type = amount_type
+              @description = description
+              @end_date = end_date
+            end
+          end
+          # Configuration options for setting up an eMandate
+          attr_accessor :mandate_options
+
+          def initialize(mandate_options: nil)
+            @mandate_options = mandate_options
+          end
+        end
+
         class UsBankAccount < ::Stripe::RequestParams
           class FinancialConnections < ::Stripe::RequestParams
             class Filters < ::Stripe::RequestParams
               # The account subcategories to use to filter for selectable accounts. Valid subcategories are `checking` and `savings`.
               attr_accessor :account_subcategories
+              # ID of the institution to use to filter for selectable accounts.
+              attr_accessor :institution
 
-              def initialize(account_subcategories: nil)
+              def initialize(account_subcategories: nil, institution: nil)
                 @account_subcategories = account_subcategories
+                @institution = institution
               end
             end
             # Provide filters for the linked accounts that the customer can select for the payment method.
@@ -462,10 +676,16 @@ module Stripe
         attr_accessor :card
         # This sub-hash contains details about the Bank transfer payment method options to pass to the invoice’s PaymentIntent.
         attr_accessor :customer_balance
+        # This sub-hash contains details about the Indonesia bank transfer payment method options to pass to the invoice’s PaymentIntent.
+        attr_accessor :id_bank_transfer
         # This sub-hash contains details about the Konbini payment method options to pass to the invoice’s PaymentIntent.
         attr_accessor :konbini
+        # This sub-hash contains details about the Pix payment method options to pass to the invoice’s PaymentIntent.
+        attr_accessor :pix
         # This sub-hash contains details about the SEPA Direct Debit payment method options to pass to the invoice’s PaymentIntent.
         attr_accessor :sepa_debit
+        # This sub-hash contains details about the UPI payment method options to pass to the invoice’s PaymentIntent.
+        attr_accessor :upi
         # This sub-hash contains details about the ACH direct debit payment method options to pass to the invoice’s PaymentIntent.
         attr_accessor :us_bank_account
 
@@ -474,16 +694,22 @@ module Stripe
           bancontact: nil,
           card: nil,
           customer_balance: nil,
+          id_bank_transfer: nil,
           konbini: nil,
+          pix: nil,
           sepa_debit: nil,
+          upi: nil,
           us_bank_account: nil
         )
           @acss_debit = acss_debit
           @bancontact = bancontact
           @card = card
           @customer_balance = customer_balance
+          @id_bank_transfer = id_bank_transfer
           @konbini = konbini
+          @pix = pix
           @sepa_debit = sepa_debit
+          @upi = upi
           @us_bank_account = us_bank_account
         end
       end
@@ -517,6 +743,18 @@ module Stripe
       end
     end
 
+    class Prebilling < ::Stripe::RequestParams
+      # This is used to determine the number of billing cycles to prebill.
+      attr_accessor :iterations
+      # Whether to cancel or preserve `prebilling` if the subscription is updated during the prebilled period. The default value is `reset`.
+      attr_accessor :update_behavior
+
+      def initialize(iterations: nil, update_behavior: nil)
+        @iterations = iterations
+        @update_behavior = update_behavior
+      end
+    end
+
     class TransferData < ::Stripe::RequestParams
       # A non-negative decimal between 0 and 100, with at most two decimal places. This represents the percentage of the subscription invoice total that will be transferred to the destination account. By default, the entire amount is transferred to the destination.
       attr_accessor :amount_percent
@@ -551,8 +789,12 @@ module Stripe
     attr_accessor :application_fee_percent
     # Automatic tax settings for this subscription. We recommend you only include this parameter when the existing value is being changed.
     attr_accessor :automatic_tax
+    # The Billing Cadence which controls the timing of recurring invoice generation for this subscription. If unset, the subscription will bill according to its own configured schedule and create its own invoices. If set, this subscription will be billed by the cadence instead, potentially sharing invoices with the other subscriptions linked to that Cadence.
+    attr_accessor :billing_cadence
     # Either `now` or `unchanged`. Setting the value to `now` resets the subscription's billing cycle anchor to the current time (in UTC). For more information, see the billing cycle [documentation](https://stripe.com/docs/billing/subscriptions/billing-cycle).
     attr_accessor :billing_cycle_anchor
+    # Sets the billing schedules for the subscription.
+    attr_accessor :billing_schedules
     # Define thresholds at which an invoice will be sent, and the subscription advanced to a new billing period. When updating, pass an empty string to remove previously-defined thresholds.
     attr_accessor :billing_thresholds
     # A timestamp at which the subscription should cancel. If set to a date before the current period ends, this will cause a proration if prorations have been enabled using `proration_behavior`. If set during a future period, this will always cause a proration for that period.
@@ -601,6 +843,8 @@ module Stripe
     attr_accessor :payment_settings
     # Specifies an interval for how often to bill for any pending invoice items. It is analogous to calling [Create an invoice](https://stripe.com/docs/api#create_invoice) for the given subscription at the specified interval.
     attr_accessor :pending_invoice_item_interval
+    # If specified, the invoicing for the given billing cycle iterations will be processed now.
+    attr_accessor :prebilling
     # Determines how to handle [prorations](https://stripe.com/docs/billing/subscriptions/prorations) when the billing cycle changes (e.g., when switching plans, resetting `billing_cycle_anchor=now`, or starting a trial), or if an item's `quantity` changes. The default value is `create_prorations`.
     attr_accessor :proration_behavior
     # If set, prorations will be calculated as though the subscription was updated at the given time. This can be used to apply exactly the same prorations that were previewed with the [create preview](https://stripe.com/docs/api/invoices/create_preview) endpoint. `proration_date` can also be used to implement custom proration logic, such as prorating by day instead of by second, by providing the time that you wish to use for proration calculations.
@@ -618,7 +862,9 @@ module Stripe
       add_invoice_items: nil,
       application_fee_percent: nil,
       automatic_tax: nil,
+      billing_cadence: nil,
       billing_cycle_anchor: nil,
+      billing_schedules: nil,
       billing_thresholds: nil,
       cancel_at: nil,
       cancel_at_period_end: nil,
@@ -640,6 +886,7 @@ module Stripe
       payment_behavior: nil,
       payment_settings: nil,
       pending_invoice_item_interval: nil,
+      prebilling: nil,
       proration_behavior: nil,
       proration_date: nil,
       transfer_data: nil,
@@ -650,7 +897,9 @@ module Stripe
       @add_invoice_items = add_invoice_items
       @application_fee_percent = application_fee_percent
       @automatic_tax = automatic_tax
+      @billing_cadence = billing_cadence
       @billing_cycle_anchor = billing_cycle_anchor
+      @billing_schedules = billing_schedules
       @billing_thresholds = billing_thresholds
       @cancel_at = cancel_at
       @cancel_at_period_end = cancel_at_period_end
@@ -672,6 +921,7 @@ module Stripe
       @payment_behavior = payment_behavior
       @payment_settings = payment_settings
       @pending_invoice_item_interval = pending_invoice_item_interval
+      @prebilling = prebilling
       @proration_behavior = proration_behavior
       @proration_date = proration_date
       @transfer_data = transfer_data

data/lib/stripe/params/tax/form_list_params.rb

@@ -0,0 +1,51 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module Tax
+    class FormListParams < ::Stripe::RequestParams
+      class Payee < ::Stripe::RequestParams
+        # The ID of the Stripe account whose forms will be retrieved.
+        attr_accessor :account
+        # The external reference to the payee whose forms will be retrieved.
+        attr_accessor :external_reference
+        # Specifies the payee type. Either `account` or `external_reference`.
+        attr_accessor :type
+
+        def initialize(account: nil, external_reference: nil, type: nil)
+          @account = account
+          @external_reference = external_reference
+          @type = type
+        end
+      end
+      # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
+      attr_accessor :ending_before
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+      # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
+      attr_accessor :limit
+      # The payee whose volume is represented on the tax form.
+      attr_accessor :payee
+      # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
+      attr_accessor :starting_after
+      # An optional filter on the list, based on the object `type` field. Without the filter, the list includes all current and future tax form types. If your integration expects only one type of tax form in the response, make sure to provide a type value in the request.
+      attr_accessor :type
+
+      def initialize(
+        ending_before: nil,
+        expand: nil,
+        limit: nil,
+        payee: nil,
+        starting_after: nil,
+        type: nil
+      )
+        @ending_before = ending_before
+        @expand = expand
+        @limit = limit
+        @payee = payee
+        @starting_after = starting_after
+        @type = type
+      end
+    end
+  end
+end

data/lib/stripe/params/tax/form_pdf_params.rb

@@ -0,0 +1,15 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module Tax
+    class FormPdfParams < ::Stripe::RequestParams
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+
+      def initialize(expand: nil)
+        @expand = expand
+      end
+    end
+  end
+end

data/lib/stripe/params/tax/form_retrieve_params.rb

@@ -0,0 +1,15 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module Tax
+    class FormRetrieveParams < ::Stripe::RequestParams
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+
+      def initialize(expand: nil)
+        @expand = expand
+      end
+    end
+  end
+end

data/lib/stripe/params/tax_id_create_params.rb

@@ -8,12 +8,15 @@ module Stripe
       attr_accessor :account
       # Customer the tax ID belongs to. Required when `type=customer`
       attr_accessor :customer
+      # v2 Account the tax ID belongs to. Can be used in place of `customer` when `type=customer`
+      attr_accessor :customer_account
       # Type of owner referenced.
       attr_accessor :type
 
-      def initialize(account: nil, customer: nil, type: nil)
+      def initialize(account: nil, customer: nil, customer_account: nil, type: nil)
         @account = account
         @customer = customer
+        @customer_account = customer_account
         @type = type
       end
     end

data/lib/stripe/params/tax_id_list_params.rb

@@ -8,12 +8,15 @@ module Stripe
       attr_accessor :account
       # Customer the tax ID belongs to. Required when `type=customer`
       attr_accessor :customer
+      # v2 Account the tax ID belongs to. Can be used in place of `customer` when `type=customer`
+      attr_accessor :customer_account
       # Type of owner referenced.
       attr_accessor :type
 
-      def initialize(account: nil, customer: nil, type: nil)
+      def initialize(account: nil, customer: nil, customer_account: nil, type: nil)
         @account = account
         @customer = customer
+        @customer_account = customer_account
         @type = type
       end
     end

data/lib/stripe/params/terminal/configuration_create_params.rb

@@ -31,6 +31,15 @@ module Stripe
         end
       end
 
+      class ReaderSecurity < ::Stripe::RequestParams
+        # Passcode used to access a reader's admin menu.
+        attr_accessor :admin_menu_passcode
+
+        def initialize(admin_menu_passcode: nil)
+          @admin_menu_passcode = admin_menu_passcode
+        end
+      end
+
       class RebootWindow < ::Stripe::RequestParams
         # Integer between 0 to 23 that represents the end hour of the reboot time window. The value must be different than the start_hour.
         attr_accessor :end_hour
@@ -573,6 +582,8 @@ module Stripe
       attr_accessor :name
       # Configurations for collecting transactions offline.
       attr_accessor :offline
+      # Configurations for reader security settings.
+      attr_accessor :reader_security
       # Reboot time settings for readers. that support customized reboot time configuration.
       attr_accessor :reboot_window
       # An object containing device type specific settings for Stripe S700 readers.
@@ -590,6 +601,7 @@ module Stripe
         expand: nil,
         name: nil,
         offline: nil,
+        reader_security: nil,
         reboot_window: nil,
         stripe_s700: nil,
         tipping: nil,
@@ -601,6 +613,7 @@ module Stripe
         @expand = expand
         @name = name
         @offline = offline
+        @reader_security = reader_security
         @reboot_window = reboot_window
         @stripe_s700 = stripe_s700
         @tipping = tipping

data/lib/stripe/params/terminal/configuration_update_params.rb

@@ -31,6 +31,15 @@ module Stripe
         end
       end
 
+      class ReaderSecurity < ::Stripe::RequestParams
+        # Passcode used to access a reader's admin menu.
+        attr_accessor :admin_menu_passcode
+
+        def initialize(admin_menu_passcode: nil)
+          @admin_menu_passcode = admin_menu_passcode
+        end
+      end
+
       class RebootWindow < ::Stripe::RequestParams
         # Integer between 0 to 23 that represents the end hour of the reboot time window. The value must be different than the start_hour.
         attr_accessor :end_hour
@@ -573,6 +582,8 @@ module Stripe
       attr_accessor :name
       # Configurations for collecting transactions offline.
       attr_accessor :offline
+      # Configurations for reader security settings.
+      attr_accessor :reader_security
       # Reboot time settings for readers. that support customized reboot time configuration.
       attr_accessor :reboot_window
       # An object containing device type specific settings for Stripe S700 readers.
@@ -590,6 +601,7 @@ module Stripe
         expand: nil,
         name: nil,
         offline: nil,
+        reader_security: nil,
         reboot_window: nil,
         stripe_s700: nil,
         tipping: nil,
@@ -601,6 +613,7 @@ module Stripe
         @expand = expand
         @name = name
         @offline = offline
+        @reader_security = reader_security
         @reboot_window = reboot_window
         @stripe_s700 = stripe_s700
         @tipping = tipping

data/lib/stripe/params/terminal/reader_collected_data_retrieve_params.rb

@@ -0,0 +1,15 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module Terminal
+    class ReaderCollectedDataRetrieveParams < ::Stripe::RequestParams
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+
+      def initialize(expand: nil)
+        @expand = expand
+      end
+    end
+  end
+end

data/lib/stripe/params/test_helpers/capital/financing_offer_create_params.rb

@@ -0,0 +1,39 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module TestHelpers
+    module Capital
+      class FinancingOfferCreateParams < ::Stripe::RequestParams
+        # Amount of financing offered, in minor units. For example, 1,000 USD is represented as 100000.
+        attr_accessor :advance_amount
+        # Specifies which fields in the response should be expanded.
+        attr_accessor :expand
+        # Fixed fee amount, in minor units. For example, 100 USD is represented as 10000.
+        attr_accessor :fee_amount
+        # The type of financing offer.
+        attr_accessor :financing_type
+        # The status of the financing offer.
+        attr_accessor :status
+        # Per-transaction rate at which Stripe withholds funds to repay the financing.
+        attr_accessor :withhold_rate
+
+        def initialize(
+          advance_amount: nil,
+          expand: nil,
+          fee_amount: nil,
+          financing_type: nil,
+          status: nil,
+          withhold_rate: nil
+        )
+          @advance_amount = advance_amount
+          @expand = expand
+          @fee_amount = fee_amount
+          @financing_type = financing_type
+          @status = status
+          @withhold_rate = withhold_rate
+        end
+      end
+    end
+  end
+end