stripe 17.3.0.pre.alpha.2 → 18.1.0.pre.beta.1

data/lib/stripe/resources/setup_attempt.rb

@@ -273,7 +273,7 @@ module Stripe
       end
 
       class Ideal < ::Stripe::StripeObject
-        # The customer's bank. Can be one of `abn_amro`, `asn_bank`, `bunq`, `buut`, `handelsbanken`, `ing`, `knab`, `moneyou`, `n26`, `nn`, `rabobank`, `regiobank`, `revolut`, `sns_bank`, `triodos_bank`, `van_lanschot`, or `yoursafe`.
+        # The customer's bank. Can be one of `abn_amro`, `asn_bank`, `bunq`, `buut`, `finom`, `handelsbanken`, `ing`, `knab`, `moneyou`, `n26`, `nn`, `rabobank`, `regiobank`, `revolut`, `sns_bank`, `triodos_bank`, `van_lanschot`, or `yoursafe`.
         attr_reader :bank
         # The Bank Identifier Code of the customer's bank.
         attr_reader :bic

data/lib/stripe/resources/setup_intent.rb

@@ -434,15 +434,15 @@ module Stripe
         class MandateOptions < ::Stripe::StripeObject
           # Amount that will be collected. It is required when `amount_type` is `fixed`.
           attr_reader :amount
-          # The type of amount that will be collected. The amount charged must be exact or up to the value of `amount` param for `fixed` or `maximum` type respectively.
+          # The type of amount that will be collected. The amount charged must be exact or up to the value of `amount` param for `fixed` or `maximum` type respectively. Defaults to `maximum`.
           attr_reader :amount_type
           # Date, in YYYY-MM-DD format, after which payments will not be collected. Defaults to no end date.
           attr_reader :end_date
-          # The periodicity at which payments will be collected.
+          # The periodicity at which payments will be collected. Defaults to `adhoc`.
           attr_reader :payment_schedule
           # The number of payments that will be made during a payment period. Defaults to 1 except for when `payment_schedule` is `adhoc`. In that case, it defaults to no limit.
           attr_reader :payments_per_period
-          # The purpose for which payments are made. Defaults to retail.
+          # The purpose for which payments are made. Has a default value based on your merchant category code.
           attr_reader :purpose
           # Date, in YYYY-MM-DD format, from which payments will be collected. Defaults to confirmation time.
           attr_reader :start_date
@@ -656,43 +656,6 @@ module Stripe
         @field_remappings = {}
       end
     end
-
-    class SetupDetails < ::Stripe::StripeObject
-      class Benefit < ::Stripe::StripeObject
-        class FrMealVoucher < ::Stripe::StripeObject
-          # The 14-digit SIRET of the meal voucher acceptor.
-          attr_reader :siret
-
-          def self.inner_class_types
-            @inner_class_types = {}
-          end
-
-          def self.field_remappings
-            @field_remappings = {}
-          end
-        end
-        # Attribute for field fr_meal_voucher
-        attr_reader :fr_meal_voucher
-
-        def self.inner_class_types
-          @inner_class_types = { fr_meal_voucher: FrMealVoucher }
-        end
-
-        def self.field_remappings
-          @field_remappings = {}
-        end
-      end
-      # Attribute for field benefit
-      attr_reader :benefit
-
-      def self.inner_class_types
-        @inner_class_types = { benefit: Benefit }
-      end
-
-      def self.field_remappings
-        @field_remappings = {}
-      end
-    end
     # ID of the Connect application that created the SetupIntent.
     attr_reader :application
     # If present, the SetupIntent's payment method will be attached to the in-context Stripe Account.
@@ -751,8 +714,6 @@ module Stripe
     attr_reader :payment_method_options
     # The list of payment method types (e.g. card) that this SetupIntent is allowed to set up. A list of valid payment method types can be found [here](https://docs.stripe.com/api/payment_methods/object#payment_method_object-type).
     attr_reader :payment_method_types
-    # Attribute for field setup_details
-    attr_reader :setup_details
     # ID of the single_use Mandate generated by the SetupIntent.
     attr_reader :single_use_mandate
     # [Status](https://stripe.com/docs/payments/intents#intent-statuses) of this SetupIntent, one of `requires_payment_method`, `requires_confirmation`, `requires_action`, `processing`, `canceled`, or `succeeded`.
@@ -882,7 +843,6 @@ module Stripe
         next_action: NextAction,
         payment_method_configuration_details: PaymentMethodConfigurationDetails,
         payment_method_options: PaymentMethodOptions,
-        setup_details: SetupDetails,
       }
     end
 

data/lib/stripe/resources/subscription.rb

@@ -113,87 +113,7 @@ module Stripe
         end
       end
 
-      class BillFrom < ::Stripe::StripeObject
-        class AmendmentStart < ::Stripe::StripeObject
-          # Use an index to specify the position of an amendment to start prebilling with.
-          attr_reader :index
-
-          def self.inner_class_types
-            @inner_class_types = {}
-          end
-
-          def self.field_remappings
-            @field_remappings = {}
-          end
-        end
-
-        class LineStartsAt < ::Stripe::StripeObject
-          # Unique identifier for the object.
-          attr_reader :id
-
-          def self.inner_class_types
-            @inner_class_types = {}
-          end
-
-          def self.field_remappings
-            @field_remappings = {}
-          end
-        end
-
-        class Relative < ::Stripe::StripeObject
-          # Specifies billing duration. Possible values are `day`, `week`, `month`, or `year`.
-          attr_reader :interval
-          # The multiplier applied to the interval.
-          attr_reader :interval_count
-
-          def self.inner_class_types
-            @inner_class_types = {}
-          end
-
-          def self.field_remappings
-            @field_remappings = {}
-          end
-        end
-        # Use an index to specify the position of an amendment to start prebilling with.
-        attr_reader :amendment_start
-        # The time the billing schedule applies from.
-        attr_reader :computed_timestamp
-        # Lets you bill the period starting from a particular Quote line.
-        attr_reader :line_starts_at
-        # Timestamp is calculated from the request time.
-        attr_reader :relative
-        # Use a precise Unix timestamp for prebilling to start. Must be earlier than `bill_until`.
-        attr_reader :timestamp
-        # Describes how the billing schedule determines the start date. Possible values are `timestamp`, `relative`, `amendment_start`, `now`, `quote_acceptance_date`, `line_starts_at`, or `pause_collection_start`.
-        attr_reader :type
-
-        def self.inner_class_types
-          @inner_class_types = {
-            amendment_start: AmendmentStart,
-            line_starts_at: LineStartsAt,
-            relative: Relative,
-          }
-        end
-
-        def self.field_remappings
-          @field_remappings = {}
-        end
-      end
-
       class BillUntil < ::Stripe::StripeObject
-        class AmendmentEnd < ::Stripe::StripeObject
-          # Use an index to specify the position of an amendment to end prebilling with.
-          attr_reader :index
-
-          def self.inner_class_types
-            @inner_class_types = {}
-          end
-
-          def self.field_remappings
-            @field_remappings = {}
-          end
-        end
-
         class Duration < ::Stripe::StripeObject
           # Specifies billing duration. Either `day`, `week`, `month` or `year`.
           attr_reader :interval
@@ -208,19 +128,6 @@ module Stripe
             @field_remappings = {}
           end
         end
-
-        class LineEndsAt < ::Stripe::StripeObject
-          # Unique identifier for the object.
-          attr_reader :id
-
-          def self.inner_class_types
-            @inner_class_types = {}
-          end
-
-          def self.field_remappings
-            @field_remappings = {}
-          end
-        end
         # The timestamp the billing schedule will apply until.
         attr_reader :computed_timestamp
         # Specifies the billing period.
@@ -229,17 +136,9 @@ module Stripe
         attr_reader :timestamp
         # Describes how the billing schedule will determine the end date. Either `duration` or `timestamp`.
         attr_reader :type
-        # Use an index to specify the position of an amendment to end prebilling with.
-        attr_reader :amendment_end
-        # Lets you bill the period ending at a particular Quote line.
-        attr_reader :line_ends_at
 
         def self.inner_class_types
-          @inner_class_types = {
-            duration: Duration,
-            amendment_end: AmendmentEnd,
-            line_ends_at: LineEndsAt,
-          }
+          @inner_class_types = { duration: Duration }
         end
 
         def self.field_remappings
@@ -248,15 +147,13 @@ module Stripe
       end
       # Specifies which subscription items the billing schedule applies to.
       attr_reader :applies_to
-      # Specifies the billing period.
+      # Specifies the end of billing period.
       attr_reader :bill_until
       # Unique identifier for the billing schedule.
       attr_reader :key
-      # Specifies the start of the billing period.
-      attr_reader :bill_from
 
       def self.inner_class_types
-        @inner_class_types = { applies_to: AppliesTo, bill_until: BillUntil, bill_from: BillFrom }
+        @inner_class_types = { applies_to: AppliesTo, bill_until: BillUntil }
       end
 
       def self.field_remappings

data/lib/stripe/resources/subscription_schedule.rb

@@ -171,8 +171,6 @@ module Stripe
       attr_reader :on_behalf_of
       # The account (if any) the associated subscription's payments will be attributed to for tax reporting, and where funds from each payment will be transferred to for each of the subscription's invoices.
       attr_reader :transfer_data
-      # Configures how the subscription schedule handles billing for phase transitions. Possible values are `phase_start` (default) or `billing_period_start`. `phase_start` bills based on the current state of the subscription, ignoring changes scheduled in future phases. `billing_period_start` bills predictively for upcoming phase transitions within the current billing cycle, including pricing changes and service period adjustments that will occur before the next invoice.
-      attr_reader :phase_effective_at
 
       def self.inner_class_types
         @inner_class_types = {
@@ -656,173 +654,6 @@ module Stripe
         @field_remappings = {}
       end
     end
-
-    class BillingSchedule < ::Stripe::StripeObject
-      class AppliesTo < ::Stripe::StripeObject
-        # The billing schedule will apply to the subscription item with the given price ID.
-        attr_reader :price
-        # Controls which subscription items the billing schedule applies to.
-        attr_reader :type
-
-        def self.inner_class_types
-          @inner_class_types = {}
-        end
-
-        def self.field_remappings
-          @field_remappings = {}
-        end
-      end
-
-      class BillFrom < ::Stripe::StripeObject
-        class AmendmentStart < ::Stripe::StripeObject
-          # Use an index to specify the position of an amendment to start prebilling with.
-          attr_reader :index
-
-          def self.inner_class_types
-            @inner_class_types = {}
-          end
-
-          def self.field_remappings
-            @field_remappings = {}
-          end
-        end
-
-        class LineStartsAt < ::Stripe::StripeObject
-          # Unique identifier for the object.
-          attr_reader :id
-
-          def self.inner_class_types
-            @inner_class_types = {}
-          end
-
-          def self.field_remappings
-            @field_remappings = {}
-          end
-        end
-
-        class Relative < ::Stripe::StripeObject
-          # Specifies billing duration. Possible values are `day`, `week`, `month`, or `year`.
-          attr_reader :interval
-          # The multiplier applied to the interval.
-          attr_reader :interval_count
-
-          def self.inner_class_types
-            @inner_class_types = {}
-          end
-
-          def self.field_remappings
-            @field_remappings = {}
-          end
-        end
-        # Use an index to specify the position of an amendment to start prebilling with.
-        attr_reader :amendment_start
-        # The time the billing schedule applies from.
-        attr_reader :computed_timestamp
-        # Lets you bill the period starting from a particular Quote line.
-        attr_reader :line_starts_at
-        # Timestamp is calculated from the request time.
-        attr_reader :relative
-        # Use a precise Unix timestamp for prebilling to start. Must be earlier than `bill_until`.
-        attr_reader :timestamp
-        # Describes how the billing schedule determines the start date. Possible values are `timestamp`, `relative`, `amendment_start`, `now`, `quote_acceptance_date`, `line_starts_at`, or `pause_collection_start`.
-        attr_reader :type
-
-        def self.inner_class_types
-          @inner_class_types = {
-            amendment_start: AmendmentStart,
-            line_starts_at: LineStartsAt,
-            relative: Relative,
-          }
-        end
-
-        def self.field_remappings
-          @field_remappings = {}
-        end
-      end
-
-      class BillUntil < ::Stripe::StripeObject
-        class AmendmentEnd < ::Stripe::StripeObject
-          # Use an index to specify the position of an amendment to end prebilling with.
-          attr_reader :index
-
-          def self.inner_class_types
-            @inner_class_types = {}
-          end
-
-          def self.field_remappings
-            @field_remappings = {}
-          end
-        end
-
-        class Duration < ::Stripe::StripeObject
-          # Specifies billing duration. Either `day`, `week`, `month` or `year`.
-          attr_reader :interval
-          # The multiplier applied to the interval.
-          attr_reader :interval_count
-
-          def self.inner_class_types
-            @inner_class_types = {}
-          end
-
-          def self.field_remappings
-            @field_remappings = {}
-          end
-        end
-
-        class LineEndsAt < ::Stripe::StripeObject
-          # Unique identifier for the object.
-          attr_reader :id
-
-          def self.inner_class_types
-            @inner_class_types = {}
-          end
-
-          def self.field_remappings
-            @field_remappings = {}
-          end
-        end
-        # The timestamp the billing schedule will apply until.
-        attr_reader :computed_timestamp
-        # Specifies the billing period.
-        attr_reader :duration
-        # If specified, the billing schedule will apply until the specified timestamp.
-        attr_reader :timestamp
-        # Describes how the billing schedule will determine the end date. Either `duration` or `timestamp`.
-        attr_reader :type
-        # Use an index to specify the position of an amendment to end prebilling with.
-        attr_reader :amendment_end
-        # Lets you bill the period ending at a particular Quote line.
-        attr_reader :line_ends_at
-
-        def self.inner_class_types
-          @inner_class_types = {
-            duration: Duration,
-            amendment_end: AmendmentEnd,
-            line_ends_at: LineEndsAt,
-          }
-        end
-
-        def self.field_remappings
-          @field_remappings = {}
-        end
-      end
-      # Specifies which subscription items the billing schedule applies to.
-      attr_reader :applies_to
-      # Specifies the billing period.
-      attr_reader :bill_until
-      # Unique identifier for the billing schedule.
-      attr_reader :key
-      # Specifies the start of the billing period.
-      attr_reader :bill_from
-
-      def self.inner_class_types
-        @inner_class_types = { applies_to: AppliesTo, bill_until: BillUntil, bill_from: BillFrom }
-      end
-
-      def self.field_remappings
-        @field_remappings = {}
-      end
-    end
     # ID of the Connect Application that created the schedule.
     attr_reader :application
     # Configures when the subscription schedule generates prorations for phase transitions. Possible values are `prorate_on_next_phase` or `prorate_up_front` with the default being `prorate_on_next_phase`. `prorate_on_next_phase` will apply phase changes and generate prorations at transition time. `prorate_up_front` will bill for all phases within the current billing cycle up front.
@@ -869,10 +700,6 @@ module Stripe
     attr_reader :subscription
     # ID of the test clock this subscription schedule belongs to.
     attr_reader :test_clock
-    # Billing schedules for this subscription schedule.
-    attr_reader :billing_schedules
-    # The most recent invoice this subscription schedule has generated.
-    attr_reader :latest_invoice
 
     # Amends an existing subscription schedule.
     def amend(params = {}, opts = {})
@@ -972,7 +799,6 @@ module Stripe
         last_price_migration_error: LastPriceMigrationError,
         phases: Phase,
         prebilling: Prebilling,
-        billing_schedules: BillingSchedule,
       }
     end
 

data/lib/stripe/resources/transfer.rb

@@ -61,10 +61,6 @@ module Stripe
     attr_reader :source_type
     # A string that identifies this transaction as part of a group. See the [Connect documentation](https://stripe.com/docs/connect/separate-charges-and-transfers#transfer-options) for details.
     attr_reader :transfer_group
-    # Attribute for field application_fee
-    attr_reader :application_fee
-    # Attribute for field application_fee_amount
-    attr_reader :application_fee_amount
 
     # To send funds from your Stripe account to a connected account, you create a new transfer object. Your [Stripe balance](https://docs.stripe.com/api#balance) must be able to cover the transfer amount, or you'll receive an “Insufficient Funds” error.
     def self.create(params = {}, opts = {})

data/lib/stripe/resources/v2/billing/cadence.rb

@@ -180,49 +180,6 @@ module Stripe
           end
         end
 
-        class InvoiceDiscountRule < ::Stripe::StripeObject
-          class PercentOff < ::Stripe::StripeObject
-            class MaximumApplications < ::Stripe::StripeObject
-              # Max applications type of this discount, ex: indefinite.
-              attr_reader :type
-
-              def self.inner_class_types
-                @inner_class_types = {}
-              end
-
-              def self.field_remappings
-                @field_remappings = {}
-              end
-            end
-            # The maximum applications configuration for this discount.
-            attr_reader :maximum_applications
-            # Percent that will be taken off of the amount. For example, percent_off of 50.0 will make $100 amount $50 instead.
-            attr_reader :percent_off
-
-            def self.inner_class_types
-              @inner_class_types = { maximum_applications: MaximumApplications }
-            end
-
-            def self.field_remappings
-              @field_remappings = {}
-            end
-          end
-          # Unique identifier for the object.
-          attr_reader :id
-          # The type of the discount.
-          attr_reader :type
-          # Details if the discount is a percentage off.
-          attr_reader :percent_off
-
-          def self.inner_class_types
-            @inner_class_types = { percent_off: PercentOff }
-          end
-
-          def self.field_remappings
-            @field_remappings = {}
-          end
-        end
-
         class Payer < ::Stripe::StripeObject
           # The ID of the Billing Profile object which determines how a bill will be paid.
           attr_reader :billing_profile
@@ -445,9 +402,9 @@ module Stripe
                 # Selected network to process the payment on. Depends on the available networks of the card.
                 attr_reader :network
                 # An advanced option 3D Secure. We strongly recommend that you rely on our SCA Engine to automatically prompt your customers
-                # for authentication based on risk level and [other requirements](https://docs.corp.stripe.com/strong-customer-authentication).
+                # for authentication based on risk level and [other requirements](https://docs.stripe.com/strong-customer-authentication).
                 # However, if you wish to request 3D Secure based on logic from your own fraud engine, provide this option.
-                # Read our guide on [manually requesting 3D Secure](https://docs.corp.stripe.com/payments/3d-secure/authentication-flow#manual-three-ds) for more information on how this configuration interacts with Radar and our SCA Engine.
+                # Read our guide on [manually requesting 3D Secure](https://docs.stripe.com/payments/3d-secure/authentication-flow#manual-three-ds) for more information on how this configuration interacts with Radar and our SCA Engine.
                 attr_reader :request_three_d_secure
 
                 def self.inner_class_types
@@ -613,8 +570,6 @@ module Stripe
         attr_reader :created
         # Unique identifier for the object.
         attr_reader :id
-        # The discount rules applied to all invoices for the cadence.
-        attr_reader :invoice_discount_rules
         # A lookup key used to retrieve cadences dynamically from a static string. Maximum length of 200 characters.
         attr_reader :lookup_key
         # Set of [key-value pairs](/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
@@ -639,7 +594,6 @@ module Stripe
         def self.inner_class_types
           @inner_class_types = {
             billing_cycle: BillingCycle,
-            invoice_discount_rules: InvoiceDiscountRule,
             payer: Payer,
             settings: Settings,
             settings_data: SettingsData,

data/lib/stripe/resources/v2/billing/collection_setting.rb

@@ -101,9 +101,9 @@ module Stripe
             # Selected network to process the payment on. Depends on the available networks of the card.
             attr_reader :network
             # An advanced option 3D Secure. We strongly recommend that you rely on our SCA Engine to automatically prompt your customers
-            # for authentication based on risk level and [other requirements](https://docs.corp.stripe.com/strong-customer-authentication).
+            # for authentication based on risk level and [other requirements](https://docs.stripe.com/strong-customer-authentication).
             # However, if you wish to request 3D Secure based on logic from your own fraud engine, provide this option.
-            # Read our guide on [manually requesting 3D Secure](https://docs.corp.stripe.com/payments/3d-secure/authentication-flow#manual-three-ds) for more information on how this configuration interacts with Radar and our SCA Engine.
+            # Read our guide on [manually requesting 3D Secure](https://docs.stripe.com/payments/3d-secure/authentication-flow#manual-three-ds) for more information on how this configuration interacts with Radar and our SCA Engine.
             attr_reader :request_three_d_secure
 
             def self.inner_class_types

data/lib/stripe/resources/v2/billing/collection_setting_version.rb

@@ -100,9 +100,9 @@ module Stripe
             # Selected network to process the payment on. Depends on the available networks of the card.
             attr_reader :network
             # An advanced option 3D Secure. We strongly recommend that you rely on our SCA Engine to automatically prompt your customers
-            # for authentication based on risk level and [other requirements](https://docs.corp.stripe.com/strong-customer-authentication).
+            # for authentication based on risk level and [other requirements](https://docs.stripe.com/strong-customer-authentication).
             # However, if you wish to request 3D Secure based on logic from your own fraud engine, provide this option.
-            # Read our guide on [manually requesting 3D Secure](https://docs.corp.stripe.com/payments/3d-secure/authentication-flow#manual-three-ds) for more information on how this configuration interacts with Radar and our SCA Engine.
+            # Read our guide on [manually requesting 3D Secure](https://docs.stripe.com/payments/3d-secure/authentication-flow#manual-three-ds) for more information on how this configuration interacts with Radar and our SCA Engine.
             attr_reader :request_three_d_secure
 
             def self.inner_class_types

data/lib/stripe/resources/v2/billing/meter_event.rb

@@ -21,7 +21,8 @@ module Stripe
         attr_reader :object
         # The payload of the event. This must contain the fields corresponding to a meter’s
         # `customer_mapping.event_payload_key` (default is `stripe_customer_id`) and
-        # `value_settings.event_payload_key` (default is `value`). Read more about the payload.
+        # `value_settings.event_payload_key` (default is `value`). Read more about
+        # the [payload](https://docs.stripe.com/billing/subscriptions/usage-based/recording-usage#payload-key-overrides)..
         attr_reader :payload
         # The time of the event. Must be within the past 35 calendar days or up to
         # 5 minutes in the future. Defaults to current timestamp if not specified.