stripe 17.3.0.pre.alpha.2 → 18.0.0

data/lib/stripe/params/test_helpers/capital/financing_offer_create_params.rb

@@ -1,39 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module TestHelpers
-    module Capital
-      class FinancingOfferCreateParams < ::Stripe::RequestParams
-        # Amount of financing offered, in minor units. For example, 1,000 USD is represented as 100000.
-        attr_accessor :advance_amount
-        # Specifies which fields in the response should be expanded.
-        attr_accessor :expand
-        # Fixed fee amount, in minor units. For example, 100 USD is represented as 10000.
-        attr_accessor :fee_amount
-        # The type of financing offer.
-        attr_accessor :financing_type
-        # The status of the financing offer.
-        attr_accessor :status
-        # Per-transaction rate at which Stripe withholds funds to repay the financing.
-        attr_accessor :withhold_rate
-
-        def initialize(
-          advance_amount: nil,
-          expand: nil,
-          fee_amount: nil,
-          financing_type: nil,
-          status: nil,
-          withhold_rate: nil
-        )
-          @advance_amount = advance_amount
-          @expand = expand
-          @fee_amount = fee_amount
-          @financing_type = financing_type
-          @status = status
-          @withhold_rate = withhold_rate
-        end
-      end
-    end
-  end
-end

data/lib/stripe/params/test_helpers/capital/financing_offer_refill_params.rb

@@ -1,39 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module TestHelpers
-    module Capital
-      class FinancingOfferRefillParams < ::Stripe::RequestParams
-        # Amount of financing offered, in minor units. For example, 1,000 USD is represented as 100000.
-        attr_accessor :advance_amount
-        # Specifies which fields in the response should be expanded.
-        attr_accessor :expand
-        # Fixed fee amount, in minor units. For example, 100 USD is represented as 10000.
-        attr_accessor :fee_amount
-        # The type of financing offer
-        attr_accessor :financing_type
-        # The status of the financing offer
-        attr_accessor :status
-        # Per-transaction rate at which Stripe withholds funds to repay the financing.
-        attr_accessor :withhold_rate
-
-        def initialize(
-          advance_amount: nil,
-          expand: nil,
-          fee_amount: nil,
-          financing_type: nil,
-          status: nil,
-          withhold_rate: nil
-        )
-          @advance_amount = advance_amount
-          @expand = expand
-          @fee_amount = fee_amount
-          @financing_type = financing_type
-          @status = status
-          @withhold_rate = withhold_rate
-        end
-      end
-    end
-  end
-end

data/lib/stripe/params/v2/billing/bill_setting_create_params.rb

@@ -1,74 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module Billing
-      class BillSettingCreateParams < ::Stripe::RequestParams
-        class Calculation < ::Stripe::RequestParams
-          class Tax < ::Stripe::RequestParams
-            # Determines if tax will be calculated automatically based on a PTC or manually based on rules defined by the merchant. Defaults to "manual".
-            attr_accessor :type
-
-            def initialize(type: nil)
-              @type = type
-            end
-          end
-          # Settings for calculating tax.
-          attr_accessor :tax
-
-          def initialize(tax: nil)
-            @tax = tax
-          end
-        end
-
-        class Invoice < ::Stripe::RequestParams
-          class TimeUntilDue < ::Stripe::RequestParams
-            # The interval unit for the time until due.
-            attr_accessor :interval
-            # The number of interval units. For example, if interval=day and interval_count=30,
-            # the invoice will be due in 30 days.
-            attr_accessor :interval_count
-
-            def initialize(interval: nil, interval_count: nil)
-              @interval = interval
-              @interval_count = interval_count
-            end
-          end
-          # The amount of time until the invoice will be overdue for payment.
-          attr_accessor :time_until_due
-
-          def initialize(time_until_due: nil)
-            @time_until_due = time_until_due
-          end
-        end
-        # Settings related to calculating a bill.
-        attr_accessor :calculation
-        # An optional customer-facing display name for the CollectionSetting object.
-        # Maximum length of 250 characters.
-        attr_accessor :display_name
-        # Settings related to invoice behavior.
-        attr_accessor :invoice
-        # The ID of the invoice rendering template to be used when generating invoices.
-        attr_accessor :invoice_rendering_template
-        # A lookup key used to retrieve settings dynamically from a static string.
-        # This may be up to 200 characters.
-        attr_accessor :lookup_key
-
-        def initialize(
-          calculation: nil,
-          display_name: nil,
-          invoice: nil,
-          invoice_rendering_template: nil,
-          lookup_key: nil
-        )
-          @calculation = calculation
-          @display_name = display_name
-          @invoice = invoice
-          @invoice_rendering_template = invoice_rendering_template
-          @lookup_key = lookup_key
-        end
-      end
-    end
-  end
-end

data/lib/stripe/params/v2/billing/bill_setting_list_params.rb

@@ -1,21 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module Billing
-      class BillSettingListParams < ::Stripe::RequestParams
-        # Optionally set the maximum number of results per page. Defaults to 20.
-        attr_accessor :limit
-        # Only return the settings with these lookup_keys, if any exist.
-        # You can specify up to 10 lookup_keys.
-        attr_accessor :lookup_keys
-
-        def initialize(limit: nil, lookup_keys: nil)
-          @limit = limit
-          @lookup_keys = lookup_keys
-        end
-      end
-    end
-  end
-end

data/lib/stripe/params/v2/billing/bill_setting_retrieve_params.rb

@@ -1,10 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module Billing
-      class BillSettingRetrieveParams < ::Stripe::RequestParams; end
-    end
-  end
-end

data/lib/stripe/params/v2/billing/bill_setting_update_params.rb

@@ -1,80 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module Billing
-      class BillSettingUpdateParams < ::Stripe::RequestParams
-        class Calculation < ::Stripe::RequestParams
-          class Tax < ::Stripe::RequestParams
-            # Determines if tax will be calculated automatically based on a PTC or manually based on rules defined by the merchant. Defaults to "manual".
-            attr_accessor :type
-
-            def initialize(type: nil)
-              @type = type
-            end
-          end
-          # Settings for calculating tax.
-          attr_accessor :tax
-
-          def initialize(tax: nil)
-            @tax = tax
-          end
-        end
-
-        class Invoice < ::Stripe::RequestParams
-          class TimeUntilDue < ::Stripe::RequestParams
-            # The interval unit for the time until due.
-            attr_accessor :interval
-            # The number of interval units. For example, if interval=day and interval_count=30,
-            # the invoice will be due in 30 days.
-            attr_accessor :interval_count
-
-            def initialize(interval: nil, interval_count: nil)
-              @interval = interval
-              @interval_count = interval_count
-            end
-          end
-          # The amount of time until the invoice will be overdue for payment.
-          attr_accessor :time_until_due
-
-          def initialize(time_until_due: nil)
-            @time_until_due = time_until_due
-          end
-        end
-        # Settings related to calculating a bill.
-        attr_accessor :calculation
-        # An optional customer-facing display name for the BillSetting object.
-        # To remove the display name, set it to an empty string in the request.
-        # Maximum length of 250 characters.
-        attr_accessor :display_name
-        # Settings related to invoice behavior.
-        attr_accessor :invoice
-        # The ID of the invoice rendering template to be used when generating invoices.
-        attr_accessor :invoice_rendering_template
-        # Optionally change the live version of the BillSetting. Providing `live_version = "latest"` will set the
-        # BillSetting' `live_version` to its latest version.
-        attr_accessor :live_version
-        # A lookup key used to retrieve settings dynamically from a static string.
-        # This may be up to 200 characters.
-        attr_accessor :lookup_key
-
-        def initialize(
-          calculation: nil,
-          display_name: nil,
-          invoice: nil,
-          invoice_rendering_template: nil,
-          live_version: nil,
-          lookup_key: nil
-        )
-          @calculation = calculation
-          @display_name = display_name
-          @invoice = invoice
-          @invoice_rendering_template = invoice_rendering_template
-          @live_version = live_version
-          @lookup_key = lookup_key
-        end
-      end
-    end
-  end
-end

data/lib/stripe/params/v2/billing/bill_settings/version_list_params.rb

@@ -1,19 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module Billing
-      module BillSettings
-        class VersionListParams < ::Stripe::RequestParams
-          # Optionally set the maximum number of results per page. Defaults to 20.
-          attr_accessor :limit
-
-          def initialize(limit: nil)
-            @limit = limit
-          end
-        end
-      end
-    end
-  end
-end

data/lib/stripe/params/v2/billing/bill_settings/version_retrieve_params.rb

@@ -1,12 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module Billing
-      module BillSettings
-        class VersionRetrieveParams < ::Stripe::RequestParams; end
-      end
-    end
-  end
-end

data/lib/stripe/params/v2/billing/cadence_cancel_params.rb

@@ -1,17 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module Billing
-      class CadenceCancelParams < ::Stripe::RequestParams
-        # Additional resource to include in the response.
-        attr_accessor :include
-
-        def initialize(include: nil)
-          @include = include
-        end
-      end
-    end
-  end
-end

data/lib/stripe/params/v2/billing/cadence_create_params.rb

@@ -1,257 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module Billing
-      class CadenceCreateParams < ::Stripe::RequestParams
-        class BillingCycle < ::Stripe::RequestParams
-          class Day < ::Stripe::RequestParams
-            class Time < ::Stripe::RequestParams
-              # The hour at which the billing cycle ends.
-              # This must be an integer between 0 and 23, inclusive.
-              # 0 represents midnight, and 23 represents 11 PM.
-              attr_accessor :hour
-              # The minute at which the billing cycle ends.
-              # Must be an integer between 0 and 59, inclusive.
-              attr_accessor :minute
-              # The second at which the billing cycle ends.
-              # Must be an integer between 0 and 59, inclusive.
-              attr_accessor :second
-
-              def initialize(hour: nil, minute: nil, second: nil)
-                @hour = hour
-                @minute = minute
-                @second = second
-              end
-            end
-            # The time at which the billing cycle ends.
-            # This field is optional, and if not provided, it will default to
-            # the time at which the cadence was created in UTC timezone.
-            attr_accessor :time
-
-            def initialize(time: nil)
-              @time = time
-            end
-          end
-
-          class Month < ::Stripe::RequestParams
-            class Time < ::Stripe::RequestParams
-              # The hour at which the billing cycle ends.
-              # This must be an integer between 0 and 23, inclusive.
-              # 0 represents midnight, and 23 represents 11 PM.
-              attr_accessor :hour
-              # The minute at which the billing cycle ends.
-              # Must be an integer between 0 and 59, inclusive.
-              attr_accessor :minute
-              # The second at which the billing cycle ends.
-              # Must be an integer between 0 and 59, inclusive.
-              attr_accessor :second
-
-              def initialize(hour: nil, minute: nil, second: nil)
-                @hour = hour
-                @minute = minute
-                @second = second
-              end
-            end
-            # The day to anchor the billing on for a type="month" billing cycle from
-            # 1-31. If this number is greater than the number of days in the month being
-            # billed, this will anchor to the last day of the month. If not provided,
-            # this will default to the day the cadence was created.
-            attr_accessor :day_of_month
-            # The month to anchor the billing on for a type="month" billing cycle from
-            # 1-12. If not provided, this will default to the month the cadence was created.
-            # This setting can only be used for monthly billing cycles with `interval_count` of 2, 3, 4 or 6.
-            # All occurrences will be calculated from month provided.
-            attr_accessor :month_of_year
-            # The time at which the billing cycle ends.
-            # This field is optional, and if not provided, it will default to
-            # the time at which the cadence was created in UTC timezone.
-            attr_accessor :time
-
-            def initialize(day_of_month: nil, month_of_year: nil, time: nil)
-              @day_of_month = day_of_month
-              @month_of_year = month_of_year
-              @time = time
-            end
-          end
-
-          class Week < ::Stripe::RequestParams
-            class Time < ::Stripe::RequestParams
-              # The hour at which the billing cycle ends.
-              # This must be an integer between 0 and 23, inclusive.
-              # 0 represents midnight, and 23 represents 11 PM.
-              attr_accessor :hour
-              # The minute at which the billing cycle ends.
-              # Must be an integer between 0 and 59, inclusive.
-              attr_accessor :minute
-              # The second at which the billing cycle ends.
-              # Must be an integer between 0 and 59, inclusive.
-              attr_accessor :second
-
-              def initialize(hour: nil, minute: nil, second: nil)
-                @hour = hour
-                @minute = minute
-                @second = second
-              end
-            end
-            # The day of the week to bill the type=week billing cycle on.
-            # Numbered from 1-7 for Monday to Sunday respectively, based on the ISO-8601
-            # week day numbering. If not provided, this will default to the day the
-            # cadence was created.
-            attr_accessor :day_of_week
-            # The time at which the billing cycle ends.
-            # This field is optional, and if not provided, it will default to
-            # the time at which the cadence was created in UTC timezone.
-            attr_accessor :time
-
-            def initialize(day_of_week: nil, time: nil)
-              @day_of_week = day_of_week
-              @time = time
-            end
-          end
-
-          class Year < ::Stripe::RequestParams
-            class Time < ::Stripe::RequestParams
-              # The hour at which the billing cycle ends.
-              # This must be an integer between 0 and 23, inclusive.
-              # 0 represents midnight, and 23 represents 11 PM.
-              attr_accessor :hour
-              # The minute at which the billing cycle ends.
-              # Must be an integer between 0 and 59, inclusive.
-              attr_accessor :minute
-              # The second at which the billing cycle ends.
-              # Must be an integer between 0 and 59, inclusive.
-              attr_accessor :second
-
-              def initialize(hour: nil, minute: nil, second: nil)
-                @hour = hour
-                @minute = minute
-                @second = second
-              end
-            end
-            # The day to anchor the billing on for a type="month" billing cycle from
-            # 1-31. If this number is greater than the number of days in the month being
-            # billed, this will anchor to the last day of the month. If not provided,
-            # this will default to the day the cadence was created.
-            attr_accessor :day_of_month
-            # The month to bill on from 1-12. If not provided, this will default to the
-            # month the cadence was created.
-            attr_accessor :month_of_year
-            # The time at which the billing cycle ends.
-            # This field is optional, and if not provided, it will default to
-            # the time at which the cadence was created in UTC timezone.
-            attr_accessor :time
-
-            def initialize(day_of_month: nil, month_of_year: nil, time: nil)
-              @day_of_month = day_of_month
-              @month_of_year = month_of_year
-              @time = time
-            end
-          end
-          # The number of intervals (specified in the interval attribute) between
-          # cadence billings. For example, type=month and interval_count=3 bills every
-          # 3 months. If this is not provided, it will default to 1.
-          attr_accessor :interval_count
-          # The frequency at which a cadence bills.
-          attr_accessor :type
-          # Specific configuration for determining billing dates when type=day.
-          attr_accessor :day
-          # Specific configuration for determining billing dates when type=month.
-          attr_accessor :month
-          # Specific configuration for determining billing dates when type=week.
-          attr_accessor :week
-          # Specific configuration for determining billing dates when type=year.
-          attr_accessor :year
-
-          def initialize(interval_count: nil, type: nil, day: nil, month: nil, week: nil, year: nil)
-            @interval_count = interval_count
-            @type = type
-            @day = day
-            @month = month
-            @week = week
-            @year = year
-          end
-        end
-
-        class Payer < ::Stripe::RequestParams
-          # The ID of the Billing Profile object which determines how a bill will be paid.
-          attr_accessor :billing_profile
-
-          def initialize(billing_profile: nil)
-            @billing_profile = billing_profile
-          end
-        end
-
-        class Settings < ::Stripe::RequestParams
-          class Bill < ::Stripe::RequestParams
-            # The ID of the referenced settings object.
-            attr_accessor :id
-            # An optional field to specify the version of the Settings to use.
-            # If not provided, this will always default to the live version any time the settings are used.
-            attr_accessor :version
-
-            def initialize(id: nil, version: nil)
-              @id = id
-              @version = version
-            end
-          end
-
-          class Collection < ::Stripe::RequestParams
-            # The ID of the referenced settings object.
-            attr_accessor :id
-            # An optional field to specify the version of the Settings to use.
-            # If not provided, this will always default to the live version any time the settings are used.
-            attr_accessor :version
-
-            def initialize(id: nil, version: nil)
-              @id = id
-              @version = version
-            end
-          end
-          # Settings that configure bill generation, which includes calculating totals, tax, and presenting invoices.
-          # If no setting is provided here, the settings from the customer referenced on the payer will be used.
-          # If no customer settings are present, the merchant default settings will be used.
-          attr_accessor :bill
-          # Settings that configure and manage the behavior of collecting payments.
-          # If no setting is provided here, the settings from the customer referenced from the payer will be used if they exist.
-          # If no customer settings are present, the merchant default settings will be used.
-          attr_accessor :collection
-
-          def initialize(bill: nil, collection: nil)
-            @bill = bill
-            @collection = collection
-          end
-        end
-        # The billing cycle is the object that defines future billing cycle dates.
-        attr_accessor :billing_cycle
-        # Additional resource to include in the response.
-        attr_accessor :include
-        # A lookup key used to retrieve cadences dynamically from a static string. Maximum length of 200 characters.
-        attr_accessor :lookup_key
-        # Set of [key-value pairs](/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
-        attr_accessor :metadata
-        # The payer determines the entity financially responsible for the bill.
-        attr_accessor :payer
-        # The settings associated with the cadence.
-        attr_accessor :settings
-
-        def initialize(
-          billing_cycle: nil,
-          include: nil,
-          lookup_key: nil,
-          metadata: nil,
-          payer: nil,
-          settings: nil
-        )
-          @billing_cycle = billing_cycle
-          @include = include
-          @lookup_key = lookup_key
-          @metadata = metadata
-          @payer = payer
-          @settings = settings
-        end
-      end
-    end
-  end
-end

data/lib/stripe/params/v2/billing/cadence_list_params.rb

@@ -1,43 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module Billing
-      class CadenceListParams < ::Stripe::RequestParams
-        class Payer < ::Stripe::RequestParams
-          # The ID of the Customer object. If provided, only cadences that specifically reference the provided customer ID will be returned.
-          attr_accessor :customer
-          # A string identifying the type of the payer. Currently the only supported value is `customer`.
-          attr_accessor :type
-
-          def initialize(customer: nil, type: nil)
-            @customer = customer
-            @type = type
-          end
-        end
-        # Additional resource to include in the response.
-        attr_accessor :include
-        # Optionally set the maximum number of results per page. Defaults to 20.
-        attr_accessor :limit
-        # Only return the cadences with these lookup_keys, if any exist. You can specify up to 10 lookup_keys.
-        # Mutually exclusive with `test_clock` and `payer`.
-        attr_accessor :lookup_keys
-        # If provided, only cadences that specifically reference the payer will be returned. Mutually exclusive with `test_clock` and `lookup_keys`.
-        attr_accessor :payer
-        # If provided, only cadences that specifically reference the provided test clock ID (via the
-        # customer's test clock) will be returned.
-        # Mutually exclusive with `payer`.
-        attr_accessor :test_clock
-
-        def initialize(include: nil, limit: nil, lookup_keys: nil, payer: nil, test_clock: nil)
-          @include = include
-          @limit = limit
-          @lookup_keys = lookup_keys
-          @payer = payer
-          @test_clock = test_clock
-        end
-      end
-    end
-  end
-end

data/lib/stripe/params/v2/billing/cadence_retrieve_params.rb

@@ -1,17 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-module Stripe
-  module V2
-    module Billing
-      class CadenceRetrieveParams < ::Stripe::RequestParams
-        # Additional resource to include in the response.
-        attr_accessor :include
-
-        def initialize(include: nil)
-          @include = include
-        end
-      end
-    end
-  end
-end