stripe 17.1.0 → 17.2.0.pre.beta.1

data/lib/stripe/params/v2/money_management/transaction_list_params.rb

@@ -0,0 +1,47 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module V2
+    module MoneyManagement
+      class TransactionListParams < ::Stripe::RequestParams
+        # Filter for Transactions created at an exact time.
+        attr_accessor :created
+        # Filter for Transactions created after the specified timestamp.
+        attr_accessor :created_gt
+        # Filter for Transactions created at or after the specified timestamp.
+        attr_accessor :created_gte
+        # Filter for Transactions created before the specified timestamp.
+        attr_accessor :created_lt
+        # Filter for Transactions created at or before the specified timestamp.
+        attr_accessor :created_lte
+        # Filter for Transactions belonging to a FinancialAccount.
+        attr_accessor :financial_account
+        # Filter for Transactions corresponding to a Flow.
+        attr_accessor :flow
+        # The page limit.
+        attr_accessor :limit
+
+        def initialize(
+          created: nil,
+          created_gt: nil,
+          created_gte: nil,
+          created_lt: nil,
+          created_lte: nil,
+          financial_account: nil,
+          flow: nil,
+          limit: nil
+        )
+          @created = created
+          @created_gt = created_gt
+          @created_gte = created_gte
+          @created_lt = created_lt
+          @created_lte = created_lte
+          @financial_account = financial_account
+          @flow = flow
+          @limit = limit
+        end
+      end
+    end
+  end
+end

data/lib/stripe/params/v2/money_management/transaction_retrieve_params.rb

@@ -0,0 +1,10 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module V2
+    module MoneyManagement
+      class TransactionRetrieveParams < ::Stripe::RequestParams; end
+    end
+  end
+end

data/lib/stripe/params/v2/payments/off_session_payment_cancel_params.rb

@@ -0,0 +1,10 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module V2
+    module Payments
+      class OffSessionPaymentCancelParams < ::Stripe::RequestParams; end
+    end
+  end
+end

data/lib/stripe/params/v2/payments/off_session_payment_capture_params.rb

@@ -0,0 +1,61 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module V2
+    module Payments
+      class OffSessionPaymentCaptureParams < ::Stripe::RequestParams
+        class TransferData < ::Stripe::RequestParams
+          # The amount transferred to the destination account. This transfer will occur
+          # automatically after the payment succeeds. If no amount is specified, by default
+          # the entire payment amount is transferred to the destination account. The amount
+          # must be less than or equal to the
+          # [amount_requested](https://docs.corp.stripe.com/api/v2/off-session-payments/object?api-version=2025-05-28.preview#v2_off_session_payment_object-amount_requested),
+          # and must be a positive integer representing how much to transfer in the smallest
+          # currency unit (e.g., 100 cents to charge $1.00).
+          attr_accessor :amount
+          # The account (if any) that the payment is attributed to for tax reporting, and
+          # where funds from the payment are transferred to after payment success.
+          attr_accessor :destination
+
+          def initialize(amount: nil, destination: nil)
+            @amount = amount
+            @destination = destination
+          end
+        end
+        # The amount to capture.
+        attr_accessor :amount_to_capture
+        # Set of [key-value pairs](https://docs.corp.stripe.com/api/metadata) that you can
+        # attach to an object. This can be useful for storing additional information about
+        # the object in a structured format. Learn more about
+        # [storing information in metadata](https://docs.corp.stripe.com/payments/payment-intents#storing-information-in-metadata).
+        attr_accessor :metadata
+        # Text that appears on the customer’s statement as the statement descriptor for a
+        # non-card charge. This value overrides the account’s default statement descriptor.
+        # For information about requirements, including the 22-character limit, see the
+        # [Statement Descriptor docs](https://docs.stripe.com/get-started/account/statement-descriptors).
+        attr_accessor :statement_descriptor
+        # Provides information about a card charge. Concatenated to the account’s
+        # [statement descriptor prefix](https://docs.stripe.com/get-started/account/statement-descriptors#static)
+        # to form the complete statement descriptor that appears on the customer’s statement.
+        attr_accessor :statement_descriptor_suffix
+        # The data that automatically creates a Transfer after the payment finalizes. Learn more about the use case for [connected accounts](https://docs.corp.stripe.com/payments/connected-accounts).
+        attr_accessor :transfer_data
+
+        def initialize(
+          amount_to_capture: nil,
+          metadata: nil,
+          statement_descriptor: nil,
+          statement_descriptor_suffix: nil,
+          transfer_data: nil
+        )
+          @amount_to_capture = amount_to_capture
+          @metadata = metadata
+          @statement_descriptor = statement_descriptor
+          @statement_descriptor_suffix = statement_descriptor_suffix
+          @transfer_data = transfer_data
+        end
+      end
+    end
+  end
+end

data/lib/stripe/params/v2/payments/off_session_payment_create_params.rb

@@ -0,0 +1,237 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module V2
+    module Payments
+      class OffSessionPaymentCreateParams < ::Stripe::RequestParams
+        class AmountDetails < ::Stripe::RequestParams
+          class LineItem < ::Stripe::RequestParams
+            class Tax < ::Stripe::RequestParams
+              # Total portion of the amount that is for tax.
+              attr_accessor :total_tax_amount
+
+              def initialize(total_tax_amount: nil)
+                @total_tax_amount = total_tax_amount
+              end
+            end
+            # The amount an item was discounted for. Positive integer.
+            attr_accessor :discount_amount
+            # Unique identifier of the product. At most 12 characters long.
+            attr_accessor :product_code
+            # Name of the product. At most 100 characters long.
+            attr_accessor :product_name
+            # Number of items of the product. Positive integer.
+            attr_accessor :quantity
+            # Contains information about the tax on the item.
+            attr_accessor :tax
+            # Cost of the product. Non-negative integer.
+            attr_accessor :unit_cost
+
+            def initialize(
+              discount_amount: nil,
+              product_code: nil,
+              product_name: nil,
+              quantity: nil,
+              tax: nil,
+              unit_cost: nil
+            )
+              @discount_amount = discount_amount
+              @product_code = product_code
+              @product_name = product_name
+              @quantity = quantity
+              @tax = tax
+              @unit_cost = unit_cost
+            end
+          end
+
+          class Shipping < ::Stripe::RequestParams
+            # Portion of the amount that is for shipping.
+            attr_accessor :amount
+            # The postal code that represents the shipping source.
+            attr_accessor :from_postal_code
+            # The postal code that represents the shipping destination.
+            attr_accessor :to_postal_code
+
+            def initialize(amount: nil, from_postal_code: nil, to_postal_code: nil)
+              @amount = amount
+              @from_postal_code = from_postal_code
+              @to_postal_code = to_postal_code
+            end
+          end
+
+          class Tax < ::Stripe::RequestParams
+            # Total portion of the amount that is for tax.
+            attr_accessor :total_tax_amount
+
+            def initialize(total_tax_amount: nil)
+              @total_tax_amount = total_tax_amount
+            end
+          end
+          # The amount the total transaction was discounted for.
+          attr_accessor :discount_amount
+          # A list of line items, each containing information about a product in the PaymentIntent. There is a maximum of 100 line items.
+          attr_accessor :line_items
+          # Contains information about the shipping portion of the amount.
+          attr_accessor :shipping
+          # Contains information about the tax portion of the amount.
+          attr_accessor :tax
+
+          def initialize(discount_amount: nil, line_items: nil, shipping: nil, tax: nil)
+            @discount_amount = discount_amount
+            @line_items = line_items
+            @shipping = shipping
+            @tax = tax
+          end
+        end
+
+        class Capture < ::Stripe::RequestParams
+          # The method to use to capture the payment.
+          attr_accessor :capture_method
+
+          def initialize(capture_method: nil)
+            @capture_method = capture_method
+          end
+        end
+
+        class PaymentMethodOptions < ::Stripe::RequestParams
+          class Card < ::Stripe::RequestParams
+            # If you are making a Credential On File transaction with a previously saved card, you should pass the Network Transaction ID
+            # from a prior initial authorization on Stripe (from a successful SetupIntent or a PaymentIntent with `setup_future_usage` set),
+            # or one that you have obtained from another payment processor. This is a token from the network which uniquely identifies the transaction.
+            # Visa calls this the Transaction ID, Mastercard calls this the Trace ID, and American Express calls this the Acquirer Reference Data.
+            # Note that you should pass in a Network Transaction ID if you have one, regardless of whether this is a
+            # Customer-Initiated Transaction (CIT) or a Merchant-Initiated Transaction (MIT).
+            attr_accessor :network_transaction_id
+
+            def initialize(network_transaction_id: nil)
+              @network_transaction_id = network_transaction_id
+            end
+          end
+          # Payment method options for the card payment type.
+          attr_accessor :card
+
+          def initialize(card: nil)
+            @card = card
+          end
+        end
+
+        class PaymentsOrchestration < ::Stripe::RequestParams
+          # True when you want to enable payments orchestration for this off-session payment. False otherwise.
+          attr_accessor :enabled
+
+          def initialize(enabled: nil)
+            @enabled = enabled
+          end
+        end
+
+        class RetryDetails < ::Stripe::RequestParams
+          # The pre-configured retry policy to use for the payment.
+          attr_accessor :retry_policy
+          # Indicates the strategy for how you want Stripe to retry the payment.
+          attr_accessor :retry_strategy
+
+          def initialize(retry_policy: nil, retry_strategy: nil)
+            @retry_policy = retry_policy
+            @retry_strategy = retry_strategy
+          end
+        end
+
+        class TransferData < ::Stripe::RequestParams
+          # The amount transferred to the destination account. This transfer will occur
+          # automatically after the payment succeeds. If no amount is specified, by default
+          # the entire payment amount is transferred to the destination account. The amount
+          # must be less than or equal to the
+          # [amount_requested](https://docs.corp.stripe.com/api/v2/off-session-payments/object?api-version=2025-05-28.preview#v2_off_session_payment_object-amount_requested),
+          # and must be a positive integer representing how much to transfer in the smallest
+          # currency unit (e.g., 100 cents to charge $1.00).
+          attr_accessor :amount
+          # The account (if any) that the payment is attributed to for tax reporting, and
+          # where funds from the payment are transferred to after payment success.
+          attr_accessor :destination
+
+          def initialize(amount: nil, destination: nil)
+            @amount = amount
+            @destination = destination
+          end
+        end
+        # The “presentment amount” to be collected from the customer.
+        attr_accessor :amount
+        # Provides industry-specific information about the amount.
+        attr_accessor :amount_details
+        # The frequency of the underlying payment.
+        attr_accessor :cadence
+        # Details about the capture configuration for the OffSessionPayment.
+        attr_accessor :capture
+        # Whether the OffSessionPayment should be captured automatically or manually.
+        attr_accessor :capture_method
+        # ID of the Customer to which this OffSessionPayment belongs.
+        attr_accessor :customer
+        # Set of [key-value pairs](https://docs.corp.stripe.com/api/metadata) that you can
+        # attach to an object. This can be useful for storing additional information about
+        # the object in a structured format. Learn more about
+        # [storing information in metadata](https://docs.corp.stripe.com/payments/payment-intents#storing-information-in-metadata).
+        attr_accessor :metadata
+        # The account (if any) for which the funds of the OffSessionPayment are intended.
+        attr_accessor :on_behalf_of
+        # ID of the payment method used in this OffSessionPayment.
+        attr_accessor :payment_method
+        # Payment method options for the off-session payment.
+        attr_accessor :payment_method_options
+        # Details about the payments orchestration configuration.
+        attr_accessor :payments_orchestration
+        # Details about the OffSessionPayment retries.
+        attr_accessor :retry_details
+        # Text that appears on the customer’s statement as the statement descriptor for a
+        # non-card charge. This value overrides the account’s default statement descriptor.
+        # For information about requirements, including the 22-character limit, see the
+        # [Statement Descriptor docs](https://docs.stripe.com/get-started/account/statement-descriptors).
+        attr_accessor :statement_descriptor
+        # Provides information about a card charge. Concatenated to the account’s
+        # [statement descriptor prefix](https://docs.stripe.com/get-started/account/statement-descriptors#static)
+        # to form the complete statement descriptor that appears on the customer’s statement.
+        attr_accessor :statement_descriptor_suffix
+        # Test clock that can be used to advance the retry attempts in a sandbox.
+        attr_accessor :test_clock
+        # The data that automatically creates a Transfer after the payment finalizes. Learn more about the use case for [connected accounts](https://docs.corp.stripe.com/payments/connected-accounts).
+        attr_accessor :transfer_data
+
+        def initialize(
+          amount: nil,
+          amount_details: nil,
+          cadence: nil,
+          capture: nil,
+          capture_method: nil,
+          customer: nil,
+          metadata: nil,
+          on_behalf_of: nil,
+          payment_method: nil,
+          payment_method_options: nil,
+          payments_orchestration: nil,
+          retry_details: nil,
+          statement_descriptor: nil,
+          statement_descriptor_suffix: nil,
+          test_clock: nil,
+          transfer_data: nil
+        )
+          @amount = amount
+          @amount_details = amount_details
+          @cadence = cadence
+          @capture = capture
+          @capture_method = capture_method
+          @customer = customer
+          @metadata = metadata
+          @on_behalf_of = on_behalf_of
+          @payment_method = payment_method
+          @payment_method_options = payment_method_options
+          @payments_orchestration = payments_orchestration
+          @retry_details = retry_details
+          @statement_descriptor = statement_descriptor
+          @statement_descriptor_suffix = statement_descriptor_suffix
+          @test_clock = test_clock
+          @transfer_data = transfer_data
+        end
+      end
+    end
+  end
+end

data/lib/stripe/params/v2/payments/off_session_payment_list_params.rb

@@ -0,0 +1,17 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module V2
+    module Payments
+      class OffSessionPaymentListParams < ::Stripe::RequestParams
+        # The page size limit. If not provided, the default is 20.
+        attr_accessor :limit
+
+        def initialize(limit: nil)
+          @limit = limit
+        end
+      end
+    end
+  end
+end

data/lib/stripe/params/v2/payments/off_session_payment_retrieve_params.rb

@@ -0,0 +1,10 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module V2
+    module Payments
+      class OffSessionPaymentRetrieveParams < ::Stripe::RequestParams; end
+    end
+  end
+end

data/lib/stripe/params/v2/test_helpers/financial_address_credit_params.rb

@@ -0,0 +1,23 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module V2
+    module TestHelpers
+      class FinancialAddressCreditParams < ::Stripe::RequestParams
+        # Object containing the amount value and currency to credit.
+        attr_accessor :amount
+        # Open Enum. The network to use in simulating the funds flow. This will be the reflected in the resulting ReceivedCredit.
+        attr_accessor :network
+        # String explaining funds flow. Use this field to populate the statement descriptor of the ReceivedCredit created as an eventual result of this simulation.
+        attr_accessor :statement_descriptor
+
+        def initialize(amount: nil, network: nil, statement_descriptor: nil)
+          @amount = amount
+          @network = network
+          @statement_descriptor = statement_descriptor
+        end
+      end
+    end
+  end
+end

data/lib/stripe/params/v2/test_helpers/financial_address_generate_microdeposits_params.rb

@@ -0,0 +1,10 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module V2
+    module TestHelpers
+      class FinancialAddressGenerateMicrodepositsParams < ::Stripe::RequestParams; end
+    end
+  end
+end