stripe 17.1.0.pre.beta.2 → 17.2.0.pre.beta.1

data/lib/stripe/resources/financial_connections/account.rb

@@ -15,7 +15,7 @@ module Stripe
 
       nested_resource_class_methods :inferred_balance, operations: %i[list]
 
-      class AccountHolder < Stripe::StripeObject
+      class AccountHolder < ::Stripe::StripeObject
         # The ID of the Stripe account this account belongs to. Should only be present if `account_holder.type` is `account`.
         attr_reader :account
         # ID of the Stripe customer this account belongs to. Present if and only if `account_holder.type` is `customer`.
@@ -34,8 +34,8 @@ module Stripe
         end
       end
 
-      class Balance < Stripe::StripeObject
-        class Cash < Stripe::StripeObject
+      class Balance < ::Stripe::StripeObject
+        class Cash < ::Stripe::StripeObject
           # The funds available to the account holder. Typically this is the current balance after subtracting any outbound pending transactions and adding any inbound pending transactions.
           #
           # Each key is a three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase.
@@ -52,7 +52,7 @@ module Stripe
           end
         end
 
-        class Credit < Stripe::StripeObject
+        class Credit < ::Stripe::StripeObject
           # The credit that has been used by the account holder.
           #
           # Each key is a three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase.
@@ -92,7 +92,7 @@ module Stripe
         end
       end
 
-      class BalanceRefresh < Stripe::StripeObject
+      class BalanceRefresh < ::Stripe::StripeObject
         # The time at which the last refresh attempt was initiated. Measured in seconds since the Unix epoch.
         attr_reader :last_attempted_at
         # Time at which the next balance refresh can be initiated. This value will be `null` when `status` is `pending`. Measured in seconds since the Unix epoch.
@@ -109,7 +109,7 @@ module Stripe
         end
       end
 
-      class InferredBalancesRefresh < Stripe::StripeObject
+      class InferredBalancesRefresh < ::Stripe::StripeObject
         # The time at which the last refresh attempt was initiated. Measured in seconds since the Unix epoch.
         attr_reader :last_attempted_at
         # Time at which the next inferred balance refresh can be initiated. This value will be `null` when `status` is `pending`. Measured in seconds since the Unix epoch.
@@ -126,7 +126,7 @@ module Stripe
         end
       end
 
-      class OwnershipRefresh < Stripe::StripeObject
+      class OwnershipRefresh < ::Stripe::StripeObject
         # The time at which the last refresh attempt was initiated. Measured in seconds since the Unix epoch.
         attr_reader :last_attempted_at
         # Time at which the next ownership refresh can be initiated. This value will be `null` when `status` is `pending`. Measured in seconds since the Unix epoch.
@@ -143,7 +143,7 @@ module Stripe
         end
       end
 
-      class TransactionRefresh < Stripe::StripeObject
+      class TransactionRefresh < ::Stripe::StripeObject
         # Unique identifier for the object.
         attr_reader :id
         # The time at which the last refresh attempt was initiated. Measured in seconds since the Unix epoch.
@@ -287,7 +287,7 @@ module Stripe
         )
       end
 
-      # Subscribes to periodic refreshes of data associated with a Financial Connections Account.
+      # Subscribes to periodic refreshes of data associated with a Financial Connections Account. When the account status is active, data is typically refreshed once a day.
       def subscribe(params = {}, opts = {})
         request_stripe_object(
           method: :post,
@@ -297,7 +297,7 @@ module Stripe
         )
       end
 
-      # Subscribes to periodic refreshes of data associated with a Financial Connections Account.
+      # Subscribes to periodic refreshes of data associated with a Financial Connections Account. When the account status is active, data is typically refreshed once a day.
       def self.subscribe(account, params = {}, opts = {})
         request_stripe_object(
           method: :post,

data/lib/stripe/resources/financial_connections/institution.rb

@@ -12,8 +12,8 @@ module Stripe
         "financial_connections.institution"
       end
 
-      class Features < Stripe::StripeObject
-        class Balances < Stripe::StripeObject
+      class Features < ::Stripe::StripeObject
+        class Balances < ::Stripe::StripeObject
           # Whether the given feature is supported by this institution.
           attr_reader :supported
 
@@ -26,7 +26,7 @@ module Stripe
           end
         end
 
-        class Ownership < Stripe::StripeObject
+        class Ownership < ::Stripe::StripeObject
           # Whether the given feature is supported by this institution.
           attr_reader :supported
 
@@ -39,7 +39,7 @@ module Stripe
           end
         end
 
-        class PaymentMethod < Stripe::StripeObject
+        class PaymentMethod < ::Stripe::StripeObject
           # Whether the given feature is supported by this institution.
           attr_reader :supported
 
@@ -52,7 +52,7 @@ module Stripe
           end
         end
 
-        class Transactions < Stripe::StripeObject
+        class Transactions < ::Stripe::StripeObject
           # Whether the given feature is supported by this institution.
           attr_reader :supported
 

data/lib/stripe/resources/financial_connections/session.rb

@@ -12,7 +12,7 @@ module Stripe
         "financial_connections.session"
       end
 
-      class AccountHolder < Stripe::StripeObject
+      class AccountHolder < ::Stripe::StripeObject
         # The ID of the Stripe account this account belongs to. Should only be present if `account_holder.type` is `account`.
         attr_reader :account
         # ID of the Stripe customer this account belongs to. Present if and only if `account_holder.type` is `customer`.
@@ -31,7 +31,7 @@ module Stripe
         end
       end
 
-      class Filters < Stripe::StripeObject
+      class Filters < ::Stripe::StripeObject
         # Restricts the Session to subcategories of accounts that can be linked. Valid subcategories are: `checking`, `savings`, `mortgage`, `line_of_credit`, `credit_card`.
         attr_reader :account_subcategories
         # List of countries from which to filter accounts.
@@ -48,7 +48,7 @@ module Stripe
         end
       end
 
-      class Limits < Stripe::StripeObject
+      class Limits < ::Stripe::StripeObject
         # The number of accounts that can be linked in this Session.
         attr_reader :accounts
 
@@ -61,7 +61,7 @@ module Stripe
         end
       end
 
-      class ManualEntry < Stripe::StripeObject
+      class ManualEntry < ::Stripe::StripeObject
         def self.inner_class_types
           @inner_class_types = {}
         end
@@ -71,8 +71,8 @@ module Stripe
         end
       end
 
-      class StatusDetails < Stripe::StripeObject
-        class Cancelled < Stripe::StripeObject
+      class StatusDetails < ::Stripe::StripeObject
+        class Cancelled < ::Stripe::StripeObject
           # The reason for the Session being cancelled.
           attr_reader :reason
 

data/lib/stripe/resources/financial_connections/transaction.rb

@@ -12,7 +12,7 @@ module Stripe
         "financial_connections.transaction"
       end
 
-      class StatusTransitions < Stripe::StripeObject
+      class StatusTransitions < ::Stripe::StripeObject
         # Time at which this transaction posted. Measured in seconds since the Unix epoch.
         attr_reader :posted_at
         # Time at which this transaction was voided. Measured in seconds since the Unix epoch.

data/lib/stripe/resources/forwarding/request.rb

@@ -28,7 +28,7 @@ module Stripe
         "forwarding.request"
       end
 
-      class RequestContext < Stripe::StripeObject
+      class RequestContext < ::Stripe::StripeObject
         # The time it took in milliseconds for the destination endpoint to respond.
         attr_reader :destination_duration
         # The IP address of the destination.
@@ -43,8 +43,8 @@ module Stripe
         end
       end
 
-      class RequestDetails < Stripe::StripeObject
-        class Header < Stripe::StripeObject
+      class RequestDetails < ::Stripe::StripeObject
+        class Header < ::Stripe::StripeObject
           # The header name.
           attr_reader :name
           # The header value.
@@ -74,8 +74,8 @@ module Stripe
         end
       end
 
-      class ResponseDetails < Stripe::StripeObject
-        class Header < Stripe::StripeObject
+      class ResponseDetails < ::Stripe::StripeObject
+        class Header < ::Stripe::StripeObject
           # The header name.
           attr_reader :name
           # The header value.

data/lib/stripe/resources/funding_instructions.rb

@@ -13,10 +13,10 @@ module Stripe
       "funding_instructions"
     end
 
-    class BankTransfer < Stripe::StripeObject
-      class FinancialAddress < Stripe::StripeObject
-        class Aba < Stripe::StripeObject
-          class AccountHolderAddress < Stripe::StripeObject
+    class BankTransfer < ::Stripe::StripeObject
+      class FinancialAddress < ::Stripe::StripeObject
+        class Aba < ::Stripe::StripeObject
+          class AccountHolderAddress < ::Stripe::StripeObject
             # City, district, suburb, town, or village.
             attr_reader :city
             # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
@@ -39,7 +39,7 @@ module Stripe
             end
           end
 
-          class BankAddress < Stripe::StripeObject
+          class BankAddress < ::Stripe::StripeObject
             # City, district, suburb, town, or village.
             attr_reader :city
             # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
@@ -88,8 +88,8 @@ module Stripe
           end
         end
 
-        class Iban < Stripe::StripeObject
-          class AccountHolderAddress < Stripe::StripeObject
+        class Iban < ::Stripe::StripeObject
+          class AccountHolderAddress < ::Stripe::StripeObject
             # City, district, suburb, town, or village.
             attr_reader :city
             # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
@@ -112,7 +112,7 @@ module Stripe
             end
           end
 
-          class BankAddress < Stripe::StripeObject
+          class BankAddress < ::Stripe::StripeObject
             # City, district, suburb, town, or village.
             attr_reader :city
             # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
@@ -159,8 +159,8 @@ module Stripe
           end
         end
 
-        class SortCode < Stripe::StripeObject
-          class AccountHolderAddress < Stripe::StripeObject
+        class SortCode < ::Stripe::StripeObject
+          class AccountHolderAddress < ::Stripe::StripeObject
             # City, district, suburb, town, or village.
             attr_reader :city
             # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
@@ -183,7 +183,7 @@ module Stripe
             end
           end
 
-          class BankAddress < Stripe::StripeObject
+          class BankAddress < ::Stripe::StripeObject
             # City, district, suburb, town, or village.
             attr_reader :city
             # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
@@ -228,8 +228,8 @@ module Stripe
           end
         end
 
-        class Spei < Stripe::StripeObject
-          class AccountHolderAddress < Stripe::StripeObject
+        class Spei < ::Stripe::StripeObject
+          class AccountHolderAddress < ::Stripe::StripeObject
             # City, district, suburb, town, or village.
             attr_reader :city
             # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
@@ -252,7 +252,7 @@ module Stripe
             end
           end
 
-          class BankAddress < Stripe::StripeObject
+          class BankAddress < ::Stripe::StripeObject
             # City, district, suburb, town, or village.
             attr_reader :city
             # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
@@ -299,8 +299,8 @@ module Stripe
           end
         end
 
-        class Swift < Stripe::StripeObject
-          class AccountHolderAddress < Stripe::StripeObject
+        class Swift < ::Stripe::StripeObject
+          class AccountHolderAddress < ::Stripe::StripeObject
             # City, district, suburb, town, or village.
             attr_reader :city
             # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
@@ -323,7 +323,7 @@ module Stripe
             end
           end
 
-          class BankAddress < Stripe::StripeObject
+          class BankAddress < ::Stripe::StripeObject
             # City, district, suburb, town, or village.
             attr_reader :city
             # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
@@ -372,8 +372,8 @@ module Stripe
           end
         end
 
-        class Zengin < Stripe::StripeObject
-          class AccountHolderAddress < Stripe::StripeObject
+        class Zengin < ::Stripe::StripeObject
+          class AccountHolderAddress < ::Stripe::StripeObject
             # City, district, suburb, town, or village.
             attr_reader :city
             # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
@@ -396,7 +396,7 @@ module Stripe
             end
           end
 
-          class BankAddress < Stripe::StripeObject
+          class BankAddress < ::Stripe::StripeObject
             # City, district, suburb, town, or village.
             attr_reader :city
             # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).

data/lib/stripe/resources/fx_quote.rb

@@ -17,8 +17,8 @@ module Stripe
       "fx_quote"
     end
 
-    class Rates < Stripe::StripeObject
-      class RateDetails < Stripe::StripeObject
+    class Rates < ::Stripe::StripeObject
+      class RateDetails < ::Stripe::StripeObject
         # The rate for the currency pair.
         attr_reader :base_rate
         # The fee for locking the conversion rates.
@@ -52,8 +52,8 @@ module Stripe
       end
     end
 
-    class Usage < Stripe::StripeObject
-      class Payment < Stripe::StripeObject
+    class Usage < ::Stripe::StripeObject
+      class Payment < ::Stripe::StripeObject
         # The Stripe account ID that the funds will be transferred to.
         #
         # This field should match the account ID that would be used in the PaymentIntent’s transfer_data[destination] field.
@@ -72,7 +72,7 @@ module Stripe
         end
       end
 
-      class Transfer < Stripe::StripeObject
+      class Transfer < ::Stripe::StripeObject
         # The Stripe account ID that the funds will be transferred to.
         #
         # This field should match the account ID that would be used in the Transfer’s destination field.

data/lib/stripe/resources/identity/verification_report.rb

@@ -22,8 +22,8 @@ module Stripe
         "identity.verification_report"
       end
 
-      class Document < Stripe::StripeObject
-        class Address < Stripe::StripeObject
+      class Document < ::Stripe::StripeObject
+        class Address < ::Stripe::StripeObject
           # City, district, suburb, town, or village.
           attr_reader :city
           # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
@@ -46,7 +46,7 @@ module Stripe
           end
         end
 
-        class Dob < Stripe::StripeObject
+        class Dob < ::Stripe::StripeObject
           # Numerical day between 1 and 31.
           attr_reader :day
           # Numerical month between 1 and 12.
@@ -63,7 +63,7 @@ module Stripe
           end
         end
 
-        class Error < Stripe::StripeObject
+        class Error < ::Stripe::StripeObject
           # A short machine-readable string giving the reason for the verification failure.
           attr_reader :code
           # A human-readable message giving the reason for the failure. These messages can be shown to your users.
@@ -78,7 +78,7 @@ module Stripe
           end
         end
 
-        class ExpirationDate < Stripe::StripeObject
+        class ExpirationDate < ::Stripe::StripeObject
           # Numerical day between 1 and 31.
           attr_reader :day
           # Numerical month between 1 and 12.
@@ -95,7 +95,7 @@ module Stripe
           end
         end
 
-        class IssuedDate < Stripe::StripeObject
+        class IssuedDate < ::Stripe::StripeObject
           # Numerical day between 1 and 31.
           attr_reader :day
           # Numerical month between 1 and 12.
@@ -157,8 +157,8 @@ module Stripe
         end
       end
 
-      class Email < Stripe::StripeObject
-        class Error < Stripe::StripeObject
+      class Email < ::Stripe::StripeObject
+        class Error < ::Stripe::StripeObject
           # A short machine-readable string giving the reason for the verification failure.
           attr_reader :code
           # A human-readable message giving the reason for the failure. These messages can be shown to your users.
@@ -188,8 +188,8 @@ module Stripe
         end
       end
 
-      class IdNumber < Stripe::StripeObject
-        class Dob < Stripe::StripeObject
+      class IdNumber < ::Stripe::StripeObject
+        class Dob < ::Stripe::StripeObject
           # Numerical day between 1 and 31.
           attr_reader :day
           # Numerical month between 1 and 12.
@@ -206,7 +206,7 @@ module Stripe
           end
         end
 
-        class Error < Stripe::StripeObject
+        class Error < ::Stripe::StripeObject
           # A short machine-readable string giving the reason for the verification failure.
           attr_reader :code
           # A human-readable message giving the reason for the failure. These messages can be shown to your users.
@@ -244,8 +244,8 @@ module Stripe
         end
       end
 
-      class Options < Stripe::StripeObject
-        class Document < Stripe::StripeObject
+      class Options < ::Stripe::StripeObject
+        class Document < ::Stripe::StripeObject
           # Array of strings of allowed identity document types. If the provided identity document isn’t one of the allowed types, the verification check will fail with a document_type_not_allowed error code.
           attr_reader :allowed_types
           # Collect an ID number and perform an [ID number check](https://stripe.com/docs/identity/verification-checks?type=id-number) with the document’s extracted name and date of birth.
@@ -264,7 +264,7 @@ module Stripe
           end
         end
 
-        class IdNumber < Stripe::StripeObject
+        class IdNumber < ::Stripe::StripeObject
           def self.inner_class_types
             @inner_class_types = {}
           end
@@ -287,8 +287,8 @@ module Stripe
         end
       end
 
-      class Phone < Stripe::StripeObject
-        class Error < Stripe::StripeObject
+      class Phone < ::Stripe::StripeObject
+        class Error < ::Stripe::StripeObject
           # A short machine-readable string giving the reason for the verification failure.
           attr_reader :code
           # A human-readable message giving the reason for the failure. These messages can be shown to your users.
@@ -318,8 +318,8 @@ module Stripe
         end
       end
 
-      class Selfie < Stripe::StripeObject
-        class Error < Stripe::StripeObject
+      class Selfie < ::Stripe::StripeObject
+        class Error < ::Stripe::StripeObject
           # A short machine-readable string giving the reason for the verification failure.
           attr_reader :code
           # A human-readable message giving the reason for the failure. These messages can be shown to your users.

data/lib/stripe/resources/identity/verification_session.rb

@@ -24,7 +24,7 @@ module Stripe
         "identity.verification_session"
       end
 
-      class LastError < Stripe::StripeObject
+      class LastError < ::Stripe::StripeObject
         # A short machine-readable string giving the reason for the verification or user-session failure.
         attr_reader :code
         # A message that explains the reason for verification or user-session failure.
@@ -39,8 +39,8 @@ module Stripe
         end
       end
 
-      class Options < Stripe::StripeObject
-        class Document < Stripe::StripeObject
+      class Options < ::Stripe::StripeObject
+        class Document < ::Stripe::StripeObject
           # Array of strings of allowed identity document types. If the provided identity document isn’t one of the allowed types, the verification check will fail with a document_type_not_allowed error code.
           attr_reader :allowed_types
           # Collect an ID number and perform an [ID number check](https://stripe.com/docs/identity/verification-checks?type=id-number) with the document’s extracted name and date of birth.
@@ -59,7 +59,7 @@ module Stripe
           end
         end
 
-        class Email < Stripe::StripeObject
+        class Email < ::Stripe::StripeObject
           # Request one time password verification of `provided_details.email`.
           attr_reader :require_verification
 
@@ -72,7 +72,7 @@ module Stripe
           end
         end
 
-        class IdNumber < Stripe::StripeObject
+        class IdNumber < ::Stripe::StripeObject
           def self.inner_class_types
             @inner_class_types = {}
           end
@@ -82,7 +82,7 @@ module Stripe
           end
         end
 
-        class Matching < Stripe::StripeObject
+        class Matching < ::Stripe::StripeObject
           # Strictness of the DOB matching policy to apply.
           attr_reader :dob
           # Strictness of the name matching policy to apply.
@@ -97,7 +97,7 @@ module Stripe
           end
         end
 
-        class Phone < Stripe::StripeObject
+        class Phone < ::Stripe::StripeObject
           # Request one time password verification of `provided_details.phone`.
           attr_reader :require_verification
 
@@ -135,7 +135,7 @@ module Stripe
         end
       end
 
-      class ProvidedDetails < Stripe::StripeObject
+      class ProvidedDetails < ::Stripe::StripeObject
         # Email of user being verified
         attr_reader :email
         # Phone number of user being verified
@@ -150,7 +150,7 @@ module Stripe
         end
       end
 
-      class Redaction < Stripe::StripeObject
+      class Redaction < ::Stripe::StripeObject
         # Indicates whether this object and its related objects have been redacted or not.
         attr_reader :status
 
@@ -163,7 +163,7 @@ module Stripe
         end
       end
 
-      class RelatedPerson < Stripe::StripeObject
+      class RelatedPerson < ::Stripe::StripeObject
         # Token referencing the associated Account of the related Person resource.
         attr_reader :account
         # Token referencing the related Person resource.
@@ -178,8 +178,8 @@ module Stripe
         end
       end
 
-      class VerifiedOutputs < Stripe::StripeObject
-        class Address < Stripe::StripeObject
+      class VerifiedOutputs < ::Stripe::StripeObject
+        class Address < ::Stripe::StripeObject
           # City, district, suburb, town, or village.
           attr_reader :city
           # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
@@ -202,7 +202,7 @@ module Stripe
           end
         end
 
-        class Dob < Stripe::StripeObject
+        class Dob < ::Stripe::StripeObject
           # Numerical day between 1 and 31.
           attr_reader :day
           # Numerical month between 1 and 12.