stripe 17.1.0.pre.alpha.3 → 17.1.0.pre.beta.1

data/lib/stripe/resources/invoice_payment.rb

@@ -18,7 +18,7 @@ module Stripe
       "invoice_payment"
     end
 
-    class Payment < ::Stripe::StripeObject
+    class Payment < Stripe::StripeObject
       # ID of the successful charge for this payment when `type` is `charge`.Note: charge is only surfaced if the charge object is not associated with a payment intent. If the charge object does have a payment intent, the Invoice Payment surfaces the payment intent instead.
       attr_reader :charge
       # ID of the PaymentIntent associated with this payment when `type` is `payment_intent`. Note: This property is only populated for invoices finalized on or after March 15th, 2019.
@@ -37,7 +37,7 @@ module Stripe
       end
     end
 
-    class StatusTransitions < ::Stripe::StripeObject
+    class StatusTransitions < Stripe::StripeObject
       # The time that the payment was canceled.
       attr_reader :canceled_at
       # The time that the payment succeeded.

data/lib/stripe/resources/issuing/authorization.rb

@@ -18,7 +18,7 @@ module Stripe
         "issuing.authorization"
       end
 
-      class AmountDetails < ::Stripe::StripeObject
+      class AmountDetails < Stripe::StripeObject
         # The fee charged by the ATM for the cash withdrawal.
         attr_reader :atm_fee
         # The amount of cash requested by the cardholder.
@@ -33,8 +33,8 @@ module Stripe
         end
       end
 
-      class Fleet < ::Stripe::StripeObject
-        class CardholderPromptData < ::Stripe::StripeObject
+      class Fleet < Stripe::StripeObject
+        class CardholderPromptData < Stripe::StripeObject
           # [Deprecated] An alphanumeric ID, though typical point of sales only support numeric entry. The card program can be configured to prompt for a vehicle ID, driver ID, or generic ID.
           attr_reader :alphanumeric_id
           # Driver ID.
@@ -57,8 +57,8 @@ module Stripe
           end
         end
 
-        class ReportedBreakdown < ::Stripe::StripeObject
-          class Fuel < ::Stripe::StripeObject
+        class ReportedBreakdown < Stripe::StripeObject
+          class Fuel < Stripe::StripeObject
             # Gross fuel amount that should equal Fuel Quantity multiplied by Fuel Unit Cost, inclusive of taxes.
             attr_reader :gross_amount_decimal
 
@@ -71,7 +71,7 @@ module Stripe
             end
           end
 
-          class NonFuel < ::Stripe::StripeObject
+          class NonFuel < Stripe::StripeObject
             # Gross non-fuel amount that should equal the sum of the line items, inclusive of taxes.
             attr_reader :gross_amount_decimal
 
@@ -84,7 +84,7 @@ module Stripe
             end
           end
 
-          class Tax < ::Stripe::StripeObject
+          class Tax < Stripe::StripeObject
             # Amount of state or provincial Sales Tax included in the transaction amount. `null` if not reported by merchant or not subject to tax.
             attr_reader :local_amount_decimal
             # Amount of national Sales Tax or VAT included in the transaction amount. `null` if not reported by merchant or not subject to tax.
@@ -134,7 +134,7 @@ module Stripe
         end
       end
 
-      class FraudChallenge < ::Stripe::StripeObject
+      class FraudChallenge < Stripe::StripeObject
         # The method by which the fraud challenge was delivered to the cardholder.
         attr_reader :channel
         # The status of the fraud challenge.
@@ -151,7 +151,7 @@ module Stripe
         end
       end
 
-      class Fuel < ::Stripe::StripeObject
+      class Fuel < Stripe::StripeObject
         # [Conexxus Payment System Product Code](https://www.conexxus.org/conexxus-payment-system-product-codes) identifying the primary fuel product purchased.
         attr_reader :industry_product_code
         # The quantity of `unit`s of fuel that was dispensed, represented as a decimal string with at most 12 decimal places.
@@ -172,7 +172,7 @@ module Stripe
         end
       end
 
-      class MerchantData < ::Stripe::StripeObject
+      class MerchantData < Stripe::StripeObject
         # A categorization of the seller's type of business. See our [merchant categories guide](https://stripe.com/docs/issuing/merchant-categories) for a list of possible values.
         attr_reader :category
         # The merchant category code for the seller’s business
@@ -205,7 +205,7 @@ module Stripe
         end
       end
 
-      class NetworkData < ::Stripe::StripeObject
+      class NetworkData < Stripe::StripeObject
         # Identifier assigned to the acquirer by the card network. Sometimes this value is not provided by the network; in this case, the value will be `null`.
         attr_reader :acquiring_institution_id
         # The System Trace Audit Number (STAN) is a 6-digit identifier assigned by the acquirer. Prefer `network_data.transaction_id` if present, unless you have special requirements.
@@ -222,8 +222,8 @@ module Stripe
         end
       end
 
-      class PendingRequest < ::Stripe::StripeObject
-        class AmountDetails < ::Stripe::StripeObject
+      class PendingRequest < Stripe::StripeObject
+        class AmountDetails < Stripe::StripeObject
           # The fee charged by the ATM for the cash withdrawal.
           attr_reader :atm_fee
           # The amount of cash requested by the cardholder.
@@ -261,8 +261,8 @@ module Stripe
         end
       end
 
-      class RequestHistory < ::Stripe::StripeObject
-        class AmountDetails < ::Stripe::StripeObject
+      class RequestHistory < Stripe::StripeObject
+        class AmountDetails < Stripe::StripeObject
           # The fee charged by the ATM for the cash withdrawal.
           attr_reader :atm_fee
           # The amount of cash requested by the cardholder.
@@ -310,7 +310,7 @@ module Stripe
         end
       end
 
-      class Treasury < ::Stripe::StripeObject
+      class Treasury < Stripe::StripeObject
         # The array of [ReceivedCredits](https://stripe.com/docs/api/treasury/received_credits) associated with this authorization
         attr_reader :received_credits
         # The array of [ReceivedDebits](https://stripe.com/docs/api/treasury/received_debits) associated with this authorization
@@ -327,8 +327,8 @@ module Stripe
         end
       end
 
-      class VerificationData < ::Stripe::StripeObject
-        class AuthenticationExemption < ::Stripe::StripeObject
+      class VerificationData < Stripe::StripeObject
+        class AuthenticationExemption < Stripe::StripeObject
           # The entity that requested the exemption, either the acquiring merchant or the Issuing user.
           attr_reader :claimed_by
           # The specific exemption claimed for this authorization.
@@ -343,7 +343,7 @@ module Stripe
           end
         end
 
-        class ThreeDSecure < ::Stripe::StripeObject
+        class ThreeDSecure < Stripe::StripeObject
           # The outcome of the 3D Secure authentication request.
           attr_reader :result
 

data/lib/stripe/resources/issuing/card.rb

@@ -14,8 +14,8 @@ module Stripe
         "issuing.card"
       end
 
-      class Shipping < ::Stripe::StripeObject
-        class Address < ::Stripe::StripeObject
+      class Shipping < Stripe::StripeObject
+        class Address < Stripe::StripeObject
           # City, district, suburb, town, or village.
           attr_reader :city
           # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
@@ -38,8 +38,8 @@ module Stripe
           end
         end
 
-        class AddressValidation < ::Stripe::StripeObject
-          class NormalizedAddress < ::Stripe::StripeObject
+        class AddressValidation < Stripe::StripeObject
+          class NormalizedAddress < Stripe::StripeObject
             # City, district, suburb, town, or village.
             attr_reader :city
             # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
@@ -77,7 +77,7 @@ module Stripe
           end
         end
 
-        class Customs < ::Stripe::StripeObject
+        class Customs < Stripe::StripeObject
           # A registration number used for customs in Europe. See [https://www.gov.uk/eori](https://www.gov.uk/eori) for the UK and [https://ec.europa.eu/taxation_customs/business/customs-procedures-import-and-export/customs-procedures/economic-operators-registration-and-identification-number-eori_en](https://ec.europa.eu/taxation_customs/business/customs-procedures-import-and-export/customs-procedures/economic-operators-registration-and-identification-number-eori_en) for the EU.
           attr_reader :eori_number
 
@@ -129,8 +129,8 @@ module Stripe
         end
       end
 
-      class SpendingControls < ::Stripe::StripeObject
-        class SpendingLimit < ::Stripe::StripeObject
+      class SpendingControls < Stripe::StripeObject
+        class SpendingLimit < Stripe::StripeObject
           # Maximum amount allowed to spend per interval. This amount is in the card's currency and in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal).
           attr_reader :amount
           # Array of strings containing [categories](https://stripe.com/docs/api#issuing_authorization_object-merchant_data-category) this limit applies to. Omitting this field will apply the limit to all categories.
@@ -168,8 +168,8 @@ module Stripe
         end
       end
 
-      class Wallets < ::Stripe::StripeObject
-        class ApplePay < ::Stripe::StripeObject
+      class Wallets < Stripe::StripeObject
+        class ApplePay < Stripe::StripeObject
           # Apple Pay Eligibility
           attr_reader :eligible
           # Reason the card is ineligible for Apple Pay
@@ -184,7 +184,7 @@ module Stripe
           end
         end
 
-        class GooglePay < ::Stripe::StripeObject
+        class GooglePay < Stripe::StripeObject
           # Google Pay Eligibility
           attr_reader :eligible
           # Reason the card is ineligible for Google Pay

data/lib/stripe/resources/issuing/cardholder.rb

@@ -16,8 +16,8 @@ module Stripe
         "issuing.cardholder"
       end
 
-      class Billing < ::Stripe::StripeObject
-        class Address < ::Stripe::StripeObject
+      class Billing < Stripe::StripeObject
+        class Address < Stripe::StripeObject
           # City, district, suburb, town, or village.
           attr_reader :city
           # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
@@ -51,7 +51,7 @@ module Stripe
         end
       end
 
-      class Company < ::Stripe::StripeObject
+      class Company < Stripe::StripeObject
         # Whether the company's business ID number was provided.
         attr_reader :tax_id_provided
 
@@ -64,9 +64,9 @@ module Stripe
         end
       end
 
-      class Individual < ::Stripe::StripeObject
-        class CardIssuing < ::Stripe::StripeObject
-          class UserTermsAcceptance < ::Stripe::StripeObject
+      class Individual < Stripe::StripeObject
+        class CardIssuing < Stripe::StripeObject
+          class UserTermsAcceptance < Stripe::StripeObject
             # The Unix timestamp marking when the cardholder accepted the Authorized User Terms.
             attr_reader :date
             # The IP address from which the cardholder accepted the Authorized User Terms.
@@ -94,7 +94,7 @@ module Stripe
           end
         end
 
-        class Dob < ::Stripe::StripeObject
+        class Dob < Stripe::StripeObject
           # The day of birth, between 1 and 31.
           attr_reader :day
           # The month of birth, between 1 and 12.
@@ -111,8 +111,8 @@ module Stripe
           end
         end
 
-        class Verification < ::Stripe::StripeObject
-          class Document < ::Stripe::StripeObject
+        class Verification < Stripe::StripeObject
+          class Document < Stripe::StripeObject
             # The back of a document returned by a [file upload](https://stripe.com/docs/api#create_file) with a `purpose` value of `identity_document`.
             attr_reader :back
             # The front of a document returned by a [file upload](https://stripe.com/docs/api#create_file) with a `purpose` value of `identity_document`.
@@ -157,7 +157,7 @@ module Stripe
         end
       end
 
-      class Requirements < ::Stripe::StripeObject
+      class Requirements < Stripe::StripeObject
         # If `disabled_reason` is present, all cards will decline authorizations with `cardholder_verification_required` reason.
         attr_reader :disabled_reason
         # Array of fields that need to be collected in order to verify and re-enable the cardholder.
@@ -172,8 +172,8 @@ module Stripe
         end
       end
 
-      class SpendingControls < ::Stripe::StripeObject
-        class SpendingLimit < ::Stripe::StripeObject
+      class SpendingControls < Stripe::StripeObject
+        class SpendingLimit < Stripe::StripeObject
           # Maximum amount allowed to spend per interval. This amount is in the card's currency and in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal).
           attr_reader :amount
           # Array of strings containing [categories](https://stripe.com/docs/api#issuing_authorization_object-merchant_data-category) this limit applies to. Omitting this field will apply the limit to all categories.

data/lib/stripe/resources/issuing/credit_underwriting_record.rb

@@ -14,7 +14,7 @@ module Stripe
         "issuing.credit_underwriting_record"
       end
 
-      class Application < ::Stripe::StripeObject
+      class Application < Stripe::StripeObject
         # The channel through which the applicant has submitted their application.
         attr_reader :application_method
         # Scope of demand made by the applicant.
@@ -31,7 +31,7 @@ module Stripe
         end
       end
 
-      class CreditUser < ::Stripe::StripeObject
+      class CreditUser < Stripe::StripeObject
         # Email of the applicant or accountholder.
         attr_reader :email
         # Full name of the company or person.
@@ -46,8 +46,8 @@ module Stripe
         end
       end
 
-      class Decision < ::Stripe::StripeObject
-        class ApplicationRejected < ::Stripe::StripeObject
+      class Decision < Stripe::StripeObject
+        class ApplicationRejected < Stripe::StripeObject
           # Details about the `reasons.other` when present.
           attr_reader :reason_other_explanation
           # List of reasons why the application was rejected up to 4 reasons, in order of importance.
@@ -62,7 +62,7 @@ module Stripe
           end
         end
 
-        class CreditLimitApproved < ::Stripe::StripeObject
+        class CreditLimitApproved < Stripe::StripeObject
           # Credit amount approved. An approved credit limit is required before you can set a amount in the [CreditPolicy API](https://stripe.com/docs/api/issuing/credit_policy).
           attr_reader :amount
           # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
@@ -77,7 +77,7 @@ module Stripe
           end
         end
 
-        class CreditLimitDecreased < ::Stripe::StripeObject
+        class CreditLimitDecreased < Stripe::StripeObject
           # Credit amount approved after decrease. An approved credit limit is required before you can set a amount in the [CreditPolicy API](https://stripe.com/docs/api/issuing/credit_policy).
           attr_reader :amount
           # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
@@ -96,7 +96,7 @@ module Stripe
           end
         end
 
-        class CreditLineClosed < ::Stripe::StripeObject
+        class CreditLineClosed < Stripe::StripeObject
           # Details about the `reasons.other` when present.
           attr_reader :reason_other_explanation
           # List of reasons why the existing account was closed, up to 4 reasons, in order of importance.
@@ -135,7 +135,7 @@ module Stripe
         end
       end
 
-      class UnderwritingException < ::Stripe::StripeObject
+      class UnderwritingException < Stripe::StripeObject
         # Written explanation for the exception.
         attr_reader :explanation
         # The decision before the exception was applied.

data/lib/stripe/resources/issuing/dispute.rb

@@ -16,8 +16,8 @@ module Stripe
         "issuing.dispute"
       end
 
-      class Evidence < ::Stripe::StripeObject
-        class Canceled < ::Stripe::StripeObject
+      class Evidence < Stripe::StripeObject
+        class Canceled < Stripe::StripeObject
           # (ID of a [file upload](https://stripe.com/docs/guides/file-upload)) Additional documentation supporting the dispute.
           attr_reader :additional_documentation
           # Date when order was canceled.
@@ -48,7 +48,7 @@ module Stripe
           end
         end
 
-        class Duplicate < ::Stripe::StripeObject
+        class Duplicate < Stripe::StripeObject
           # (ID of a [file upload](https://stripe.com/docs/guides/file-upload)) Additional documentation supporting the dispute.
           attr_reader :additional_documentation
           # (ID of a [file upload](https://stripe.com/docs/guides/file-upload)) Copy of the card statement showing that the product had already been paid for.
@@ -71,7 +71,7 @@ module Stripe
           end
         end
 
-        class Fraudulent < ::Stripe::StripeObject
+        class Fraudulent < Stripe::StripeObject
           # (ID of a [file upload](https://stripe.com/docs/guides/file-upload)) Additional documentation supporting the dispute.
           attr_reader :additional_documentation
           # Explanation of why the cardholder is disputing this transaction.
@@ -86,7 +86,7 @@ module Stripe
           end
         end
 
-        class MerchandiseNotAsDescribed < ::Stripe::StripeObject
+        class MerchandiseNotAsDescribed < Stripe::StripeObject
           # (ID of a [file upload](https://stripe.com/docs/guides/file-upload)) Additional documentation supporting the dispute.
           attr_reader :additional_documentation
           # Explanation of why the cardholder is disputing this transaction.
@@ -109,7 +109,7 @@ module Stripe
           end
         end
 
-        class NoValidAuthorization < ::Stripe::StripeObject
+        class NoValidAuthorization < Stripe::StripeObject
           # (ID of a [file upload](https://stripe.com/docs/guides/file-upload)) Additional documentation supporting the dispute.
           attr_reader :additional_documentation
           # Explanation of why the cardholder is disputing this transaction.
@@ -124,7 +124,7 @@ module Stripe
           end
         end
 
-        class NotReceived < ::Stripe::StripeObject
+        class NotReceived < Stripe::StripeObject
           # (ID of a [file upload](https://stripe.com/docs/guides/file-upload)) Additional documentation supporting the dispute.
           attr_reader :additional_documentation
           # Date when the cardholder expected to receive the product.
@@ -145,7 +145,7 @@ module Stripe
           end
         end
 
-        class Other < ::Stripe::StripeObject
+        class Other < Stripe::StripeObject
           # (ID of a [file upload](https://stripe.com/docs/guides/file-upload)) Additional documentation supporting the dispute.
           attr_reader :additional_documentation
           # Explanation of why the cardholder is disputing this transaction.
@@ -164,7 +164,7 @@ module Stripe
           end
         end
 
-        class ServiceNotAsDescribed < ::Stripe::StripeObject
+        class ServiceNotAsDescribed < Stripe::StripeObject
           # (ID of a [file upload](https://stripe.com/docs/guides/file-upload)) Additional documentation supporting the dispute.
           attr_reader :additional_documentation
           # Date when order was canceled.
@@ -221,7 +221,7 @@ module Stripe
         end
       end
 
-      class Treasury < ::Stripe::StripeObject
+      class Treasury < Stripe::StripeObject
         # The Treasury [DebitReversal](https://stripe.com/docs/api/treasury/debit_reversals) representing this Issuing dispute
         attr_reader :debit_reversal
         # The Treasury [ReceivedDebit](https://stripe.com/docs/api/treasury/received_debits) that is being disputed.

data/lib/stripe/resources/issuing/dispute_settlement_detail.rb

@@ -12,7 +12,7 @@ module Stripe
         "issuing.dispute_settlement_detail"
       end
 
-      class NetworkData < ::Stripe::StripeObject
+      class NetworkData < Stripe::StripeObject
         # The date the transaction was processed by the card network. This can be different from the date the seller recorded the transaction depending on when the acquirer submits the transaction to the network.
         attr_reader :processing_date
 

data/lib/stripe/resources/issuing/personalization_design.rb

@@ -14,7 +14,7 @@ module Stripe
         "issuing.personalization_design"
       end
 
-      class CarrierText < ::Stripe::StripeObject
+      class CarrierText < Stripe::StripeObject
         # The footer body text of the carrier letter.
         attr_reader :footer_body
         # The footer title text of the carrier letter.
@@ -33,7 +33,7 @@ module Stripe
         end
       end
 
-      class Preferences < ::Stripe::StripeObject
+      class Preferences < Stripe::StripeObject
         # Whether we use this personalization design to create cards when one isn't specified. A connected account uses the Connect platform's default design if no personalization design is set as the default design.
         attr_reader :is_default
         # Whether this personalization design is used to create cards when one is not specified and a default for this connected account does not exist.
@@ -48,7 +48,7 @@ module Stripe
         end
       end
 
-      class RejectionReasons < ::Stripe::StripeObject
+      class RejectionReasons < Stripe::StripeObject
         # The reason(s) the card logo was rejected.
         attr_reader :card_logo
         # The reason(s) the carrier text was rejected.

data/lib/stripe/resources/issuing/physical_bundle.rb

@@ -12,7 +12,7 @@ module Stripe
         "issuing.physical_bundle"
       end
 
-      class Features < ::Stripe::StripeObject
+      class Features < Stripe::StripeObject
         # The policy for how to use card logo images in a card design with this physical bundle.
         attr_reader :card_logo
         # The policy for how to use carrier letter text in a card design with this physical bundle.

data/lib/stripe/resources/issuing/token.rb

@@ -13,8 +13,8 @@ module Stripe
         "issuing.token"
       end
 
-      class NetworkData < ::Stripe::StripeObject
-        class Device < ::Stripe::StripeObject
+      class NetworkData < Stripe::StripeObject
+        class Device < Stripe::StripeObject
           # An obfuscated ID derived from the device ID.
           attr_reader :device_fingerprint
           # The IP address of the device at provisioning time.
@@ -37,7 +37,7 @@ module Stripe
           end
         end
 
-        class Mastercard < ::Stripe::StripeObject
+        class Mastercard < Stripe::StripeObject
           # A unique reference ID from MasterCard to represent the card account number.
           attr_reader :card_reference_id
           # The network-unique identifier for the token.
@@ -56,7 +56,7 @@ module Stripe
           end
         end
 
-        class Visa < ::Stripe::StripeObject
+        class Visa < Stripe::StripeObject
           # A unique reference ID from Visa to represent the card account number.
           attr_reader :card_reference_id
           # The network-unique identifier for the token.
@@ -75,8 +75,8 @@ module Stripe
           end
         end
 
-        class WalletProvider < ::Stripe::StripeObject
-          class CardholderAddress < ::Stripe::StripeObject
+        class WalletProvider < Stripe::StripeObject
+          class CardholderAddress < Stripe::StripeObject
             # The street address of the cardholder tokenizing the card.
             attr_reader :line1
             # The postal code of the cardholder tokenizing the card.

data/lib/stripe/resources/issuing/transaction.rb

@@ -17,7 +17,7 @@ module Stripe
         "issuing.transaction"
       end
 
-      class AmountDetails < ::Stripe::StripeObject
+      class AmountDetails < Stripe::StripeObject
         # The fee charged by the ATM for the cash withdrawal.
         attr_reader :atm_fee
         # The amount of cash requested by the cardholder.
@@ -32,7 +32,7 @@ module Stripe
         end
       end
 
-      class MerchantData < ::Stripe::StripeObject
+      class MerchantData < Stripe::StripeObject
         # A categorization of the seller's type of business. See our [merchant categories guide](https://stripe.com/docs/issuing/merchant-categories) for a list of possible values.
         attr_reader :category
         # The merchant category code for the seller’s business
@@ -65,7 +65,7 @@ module Stripe
         end
       end
 
-      class NetworkData < ::Stripe::StripeObject
+      class NetworkData < Stripe::StripeObject
         # A code created by Stripe which is shared with the merchant to validate the authorization. This field will be populated if the authorization message was approved. The code typically starts with the letter "S", followed by a six-digit number. For example, "S498162". Please note that the code is not guaranteed to be unique across authorizations.
         attr_reader :authorization_code
         # The date the transaction was processed by the card network. This can be different from the date the seller recorded the transaction depending on when the acquirer submits the transaction to the network.
@@ -82,9 +82,9 @@ module Stripe
         end
       end
 
-      class PurchaseDetails < ::Stripe::StripeObject
-        class Fleet < ::Stripe::StripeObject
-          class CardholderPromptData < ::Stripe::StripeObject
+      class PurchaseDetails < Stripe::StripeObject
+        class Fleet < Stripe::StripeObject
+          class CardholderPromptData < Stripe::StripeObject
             # Driver ID.
             attr_reader :driver_id
             # Odometer reading.
@@ -105,8 +105,8 @@ module Stripe
             end
           end
 
-          class ReportedBreakdown < ::Stripe::StripeObject
-            class Fuel < ::Stripe::StripeObject
+          class ReportedBreakdown < Stripe::StripeObject
+            class Fuel < Stripe::StripeObject
               # Gross fuel amount that should equal Fuel Volume multipled by Fuel Unit Cost, inclusive of taxes.
               attr_reader :gross_amount_decimal
 
@@ -119,7 +119,7 @@ module Stripe
               end
             end
 
-            class NonFuel < ::Stripe::StripeObject
+            class NonFuel < Stripe::StripeObject
               # Gross non-fuel amount that should equal the sum of the line items, inclusive of taxes.
               attr_reader :gross_amount_decimal
 
@@ -132,7 +132,7 @@ module Stripe
               end
             end
 
-            class Tax < ::Stripe::StripeObject
+            class Tax < Stripe::StripeObject
               # Amount of state or provincial Sales Tax included in the transaction amount. Null if not reported by merchant or not subject to tax.
               attr_reader :local_amount_decimal
               # Amount of national Sales Tax or VAT included in the transaction amount. Null if not reported by merchant or not subject to tax.
@@ -182,8 +182,8 @@ module Stripe
           end
         end
 
-        class Flight < ::Stripe::StripeObject
-          class Segment < ::Stripe::StripeObject
+        class Flight < Stripe::StripeObject
+          class Segment < Stripe::StripeObject
             # The three-letter IATA airport code of the flight's destination.
             attr_reader :arrival_airport_code
             # The airline carrier code.
@@ -225,7 +225,7 @@ module Stripe
           end
         end
 
-        class Fuel < ::Stripe::StripeObject
+        class Fuel < Stripe::StripeObject
           # [Conexxus Payment System Product Code](https://www.conexxus.org/conexxus-payment-system-product-codes) identifying the primary fuel product purchased.
           attr_reader :industry_product_code
           # The quantity of `unit`s of fuel that was dispensed, represented as a decimal string with at most 12 decimal places.
@@ -246,7 +246,7 @@ module Stripe
           end
         end
 
-        class Lodging < ::Stripe::StripeObject
+        class Lodging < Stripe::StripeObject
           # The time of checking into the lodging.
           attr_reader :check_in_at
           # The number of nights stayed at the lodging.
@@ -261,7 +261,7 @@ module Stripe
           end
         end
 
-        class Receipt < ::Stripe::StripeObject
+        class Receipt < Stripe::StripeObject
           # The description of the item. The maximum length of this field is 26 characters.
           attr_reader :description
           # The quantity of the item.
@@ -307,7 +307,7 @@ module Stripe
         end
       end
 
-      class Treasury < ::Stripe::StripeObject
+      class Treasury < Stripe::StripeObject
         # The Treasury [ReceivedCredit](https://stripe.com/docs/api/treasury/received_credits) representing this Issuing transaction if it is a refund
         attr_reader :received_credit
         # The Treasury [ReceivedDebit](https://stripe.com/docs/api/treasury/received_debits) representing this Issuing transaction if it is a capture