stripe 17.1.0.pre.alpha.1 → 17.1.0.pre.beta.1

data/lib/stripe/resources/issuing/credit_underwriting_record.rb

@@ -14,7 +14,7 @@ module Stripe
         "issuing.credit_underwriting_record"
       end
 
-      class Application < ::Stripe::StripeObject
+      class Application < Stripe::StripeObject
         # The channel through which the applicant has submitted their application.
         attr_reader :application_method
         # Scope of demand made by the applicant.
@@ -31,7 +31,7 @@ module Stripe
         end
       end
 
-      class CreditUser < ::Stripe::StripeObject
+      class CreditUser < Stripe::StripeObject
         # Email of the applicant or accountholder.
         attr_reader :email
         # Full name of the company or person.
@@ -46,8 +46,8 @@ module Stripe
         end
       end
 
-      class Decision < ::Stripe::StripeObject
-        class ApplicationRejected < ::Stripe::StripeObject
+      class Decision < Stripe::StripeObject
+        class ApplicationRejected < Stripe::StripeObject
           # Details about the `reasons.other` when present.
           attr_reader :reason_other_explanation
           # List of reasons why the application was rejected up to 4 reasons, in order of importance.
@@ -62,7 +62,7 @@ module Stripe
           end
         end
 
-        class CreditLimitApproved < ::Stripe::StripeObject
+        class CreditLimitApproved < Stripe::StripeObject
           # Credit amount approved. An approved credit limit is required before you can set a amount in the [CreditPolicy API](https://stripe.com/docs/api/issuing/credit_policy).
           attr_reader :amount
           # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
@@ -77,7 +77,7 @@ module Stripe
           end
         end
 
-        class CreditLimitDecreased < ::Stripe::StripeObject
+        class CreditLimitDecreased < Stripe::StripeObject
           # Credit amount approved after decrease. An approved credit limit is required before you can set a amount in the [CreditPolicy API](https://stripe.com/docs/api/issuing/credit_policy).
           attr_reader :amount
           # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
@@ -96,7 +96,7 @@ module Stripe
           end
         end
 
-        class CreditLineClosed < ::Stripe::StripeObject
+        class CreditLineClosed < Stripe::StripeObject
           # Details about the `reasons.other` when present.
           attr_reader :reason_other_explanation
           # List of reasons why the existing account was closed, up to 4 reasons, in order of importance.
@@ -135,7 +135,7 @@ module Stripe
         end
       end
 
-      class UnderwritingException < ::Stripe::StripeObject
+      class UnderwritingException < Stripe::StripeObject
         # Written explanation for the exception.
         attr_reader :explanation
         # The decision before the exception was applied.

data/lib/stripe/resources/issuing/dispute.rb

@@ -16,8 +16,8 @@ module Stripe
         "issuing.dispute"
       end
 
-      class Evidence < ::Stripe::StripeObject
-        class Canceled < ::Stripe::StripeObject
+      class Evidence < Stripe::StripeObject
+        class Canceled < Stripe::StripeObject
           # (ID of a [file upload](https://stripe.com/docs/guides/file-upload)) Additional documentation supporting the dispute.
           attr_reader :additional_documentation
           # Date when order was canceled.
@@ -48,7 +48,7 @@ module Stripe
           end
         end
 
-        class Duplicate < ::Stripe::StripeObject
+        class Duplicate < Stripe::StripeObject
           # (ID of a [file upload](https://stripe.com/docs/guides/file-upload)) Additional documentation supporting the dispute.
           attr_reader :additional_documentation
           # (ID of a [file upload](https://stripe.com/docs/guides/file-upload)) Copy of the card statement showing that the product had already been paid for.
@@ -71,7 +71,7 @@ module Stripe
           end
         end
 
-        class Fraudulent < ::Stripe::StripeObject
+        class Fraudulent < Stripe::StripeObject
           # (ID of a [file upload](https://stripe.com/docs/guides/file-upload)) Additional documentation supporting the dispute.
           attr_reader :additional_documentation
           # Explanation of why the cardholder is disputing this transaction.
@@ -86,7 +86,7 @@ module Stripe
           end
         end
 
-        class MerchandiseNotAsDescribed < ::Stripe::StripeObject
+        class MerchandiseNotAsDescribed < Stripe::StripeObject
           # (ID of a [file upload](https://stripe.com/docs/guides/file-upload)) Additional documentation supporting the dispute.
           attr_reader :additional_documentation
           # Explanation of why the cardholder is disputing this transaction.
@@ -109,7 +109,7 @@ module Stripe
           end
         end
 
-        class NoValidAuthorization < ::Stripe::StripeObject
+        class NoValidAuthorization < Stripe::StripeObject
           # (ID of a [file upload](https://stripe.com/docs/guides/file-upload)) Additional documentation supporting the dispute.
           attr_reader :additional_documentation
           # Explanation of why the cardholder is disputing this transaction.
@@ -124,7 +124,7 @@ module Stripe
           end
         end
 
-        class NotReceived < ::Stripe::StripeObject
+        class NotReceived < Stripe::StripeObject
           # (ID of a [file upload](https://stripe.com/docs/guides/file-upload)) Additional documentation supporting the dispute.
           attr_reader :additional_documentation
           # Date when the cardholder expected to receive the product.
@@ -145,7 +145,7 @@ module Stripe
           end
         end
 
-        class Other < ::Stripe::StripeObject
+        class Other < Stripe::StripeObject
           # (ID of a [file upload](https://stripe.com/docs/guides/file-upload)) Additional documentation supporting the dispute.
           attr_reader :additional_documentation
           # Explanation of why the cardholder is disputing this transaction.
@@ -164,7 +164,7 @@ module Stripe
           end
         end
 
-        class ServiceNotAsDescribed < ::Stripe::StripeObject
+        class ServiceNotAsDescribed < Stripe::StripeObject
           # (ID of a [file upload](https://stripe.com/docs/guides/file-upload)) Additional documentation supporting the dispute.
           attr_reader :additional_documentation
           # Date when order was canceled.
@@ -221,7 +221,7 @@ module Stripe
         end
       end
 
-      class Treasury < ::Stripe::StripeObject
+      class Treasury < Stripe::StripeObject
         # The Treasury [DebitReversal](https://stripe.com/docs/api/treasury/debit_reversals) representing this Issuing dispute
         attr_reader :debit_reversal
         # The Treasury [ReceivedDebit](https://stripe.com/docs/api/treasury/received_debits) that is being disputed.

data/lib/stripe/resources/issuing/dispute_settlement_detail.rb

@@ -12,7 +12,7 @@ module Stripe
         "issuing.dispute_settlement_detail"
       end
 
-      class NetworkData < ::Stripe::StripeObject
+      class NetworkData < Stripe::StripeObject
         # The date the transaction was processed by the card network. This can be different from the date the seller recorded the transaction depending on when the acquirer submits the transaction to the network.
         attr_reader :processing_date
 

data/lib/stripe/resources/issuing/personalization_design.rb

@@ -14,7 +14,7 @@ module Stripe
         "issuing.personalization_design"
       end
 
-      class CarrierText < ::Stripe::StripeObject
+      class CarrierText < Stripe::StripeObject
         # The footer body text of the carrier letter.
         attr_reader :footer_body
         # The footer title text of the carrier letter.
@@ -33,7 +33,7 @@ module Stripe
         end
       end
 
-      class Preferences < ::Stripe::StripeObject
+      class Preferences < Stripe::StripeObject
         # Whether we use this personalization design to create cards when one isn't specified. A connected account uses the Connect platform's default design if no personalization design is set as the default design.
         attr_reader :is_default
         # Whether this personalization design is used to create cards when one is not specified and a default for this connected account does not exist.
@@ -48,7 +48,7 @@ module Stripe
         end
       end
 
-      class RejectionReasons < ::Stripe::StripeObject
+      class RejectionReasons < Stripe::StripeObject
         # The reason(s) the card logo was rejected.
         attr_reader :card_logo
         # The reason(s) the carrier text was rejected.

data/lib/stripe/resources/issuing/physical_bundle.rb

@@ -12,7 +12,7 @@ module Stripe
         "issuing.physical_bundle"
       end
 
-      class Features < ::Stripe::StripeObject
+      class Features < Stripe::StripeObject
         # The policy for how to use card logo images in a card design with this physical bundle.
         attr_reader :card_logo
         # The policy for how to use carrier letter text in a card design with this physical bundle.

data/lib/stripe/resources/issuing/token.rb

@@ -13,8 +13,8 @@ module Stripe
         "issuing.token"
       end
 
-      class NetworkData < ::Stripe::StripeObject
-        class Device < ::Stripe::StripeObject
+      class NetworkData < Stripe::StripeObject
+        class Device < Stripe::StripeObject
           # An obfuscated ID derived from the device ID.
           attr_reader :device_fingerprint
           # The IP address of the device at provisioning time.
@@ -37,7 +37,7 @@ module Stripe
           end
         end
 
-        class Mastercard < ::Stripe::StripeObject
+        class Mastercard < Stripe::StripeObject
           # A unique reference ID from MasterCard to represent the card account number.
           attr_reader :card_reference_id
           # The network-unique identifier for the token.
@@ -56,7 +56,7 @@ module Stripe
           end
         end
 
-        class Visa < ::Stripe::StripeObject
+        class Visa < Stripe::StripeObject
           # A unique reference ID from Visa to represent the card account number.
           attr_reader :card_reference_id
           # The network-unique identifier for the token.
@@ -75,8 +75,8 @@ module Stripe
           end
         end
 
-        class WalletProvider < ::Stripe::StripeObject
-          class CardholderAddress < ::Stripe::StripeObject
+        class WalletProvider < Stripe::StripeObject
+          class CardholderAddress < Stripe::StripeObject
             # The street address of the cardholder tokenizing the card.
             attr_reader :line1
             # The postal code of the cardholder tokenizing the card.

data/lib/stripe/resources/issuing/transaction.rb

@@ -17,7 +17,7 @@ module Stripe
         "issuing.transaction"
       end
 
-      class AmountDetails < ::Stripe::StripeObject
+      class AmountDetails < Stripe::StripeObject
         # The fee charged by the ATM for the cash withdrawal.
         attr_reader :atm_fee
         # The amount of cash requested by the cardholder.
@@ -32,7 +32,7 @@ module Stripe
         end
       end
 
-      class MerchantData < ::Stripe::StripeObject
+      class MerchantData < Stripe::StripeObject
         # A categorization of the seller's type of business. See our [merchant categories guide](https://stripe.com/docs/issuing/merchant-categories) for a list of possible values.
         attr_reader :category
         # The merchant category code for the seller’s business
@@ -65,7 +65,7 @@ module Stripe
         end
       end
 
-      class NetworkData < ::Stripe::StripeObject
+      class NetworkData < Stripe::StripeObject
         # A code created by Stripe which is shared with the merchant to validate the authorization. This field will be populated if the authorization message was approved. The code typically starts with the letter "S", followed by a six-digit number. For example, "S498162". Please note that the code is not guaranteed to be unique across authorizations.
         attr_reader :authorization_code
         # The date the transaction was processed by the card network. This can be different from the date the seller recorded the transaction depending on when the acquirer submits the transaction to the network.
@@ -82,9 +82,9 @@ module Stripe
         end
       end
 
-      class PurchaseDetails < ::Stripe::StripeObject
-        class Fleet < ::Stripe::StripeObject
-          class CardholderPromptData < ::Stripe::StripeObject
+      class PurchaseDetails < Stripe::StripeObject
+        class Fleet < Stripe::StripeObject
+          class CardholderPromptData < Stripe::StripeObject
             # Driver ID.
             attr_reader :driver_id
             # Odometer reading.
@@ -105,8 +105,8 @@ module Stripe
             end
           end
 
-          class ReportedBreakdown < ::Stripe::StripeObject
-            class Fuel < ::Stripe::StripeObject
+          class ReportedBreakdown < Stripe::StripeObject
+            class Fuel < Stripe::StripeObject
               # Gross fuel amount that should equal Fuel Volume multipled by Fuel Unit Cost, inclusive of taxes.
               attr_reader :gross_amount_decimal
 
@@ -119,7 +119,7 @@ module Stripe
               end
             end
 
-            class NonFuel < ::Stripe::StripeObject
+            class NonFuel < Stripe::StripeObject
               # Gross non-fuel amount that should equal the sum of the line items, inclusive of taxes.
               attr_reader :gross_amount_decimal
 
@@ -132,7 +132,7 @@ module Stripe
               end
             end
 
-            class Tax < ::Stripe::StripeObject
+            class Tax < Stripe::StripeObject
               # Amount of state or provincial Sales Tax included in the transaction amount. Null if not reported by merchant or not subject to tax.
               attr_reader :local_amount_decimal
               # Amount of national Sales Tax or VAT included in the transaction amount. Null if not reported by merchant or not subject to tax.
@@ -182,8 +182,8 @@ module Stripe
           end
         end
 
-        class Flight < ::Stripe::StripeObject
-          class Segment < ::Stripe::StripeObject
+        class Flight < Stripe::StripeObject
+          class Segment < Stripe::StripeObject
             # The three-letter IATA airport code of the flight's destination.
             attr_reader :arrival_airport_code
             # The airline carrier code.
@@ -225,7 +225,7 @@ module Stripe
           end
         end
 
-        class Fuel < ::Stripe::StripeObject
+        class Fuel < Stripe::StripeObject
           # [Conexxus Payment System Product Code](https://www.conexxus.org/conexxus-payment-system-product-codes) identifying the primary fuel product purchased.
           attr_reader :industry_product_code
           # The quantity of `unit`s of fuel that was dispensed, represented as a decimal string with at most 12 decimal places.
@@ -246,7 +246,7 @@ module Stripe
           end
         end
 
-        class Lodging < ::Stripe::StripeObject
+        class Lodging < Stripe::StripeObject
           # The time of checking into the lodging.
           attr_reader :check_in_at
           # The number of nights stayed at the lodging.
@@ -261,7 +261,7 @@ module Stripe
           end
         end
 
-        class Receipt < ::Stripe::StripeObject
+        class Receipt < Stripe::StripeObject
           # The description of the item. The maximum length of this field is 26 characters.
           attr_reader :description
           # The quantity of the item.
@@ -307,7 +307,7 @@ module Stripe
         end
       end
 
-      class Treasury < ::Stripe::StripeObject
+      class Treasury < Stripe::StripeObject
         # The Treasury [ReceivedCredit](https://stripe.com/docs/api/treasury/received_credits) representing this Issuing transaction if it is a refund
         attr_reader :received_credit
         # The Treasury [ReceivedDebit](https://stripe.com/docs/api/treasury/received_debits) representing this Issuing transaction if it is a capture

data/lib/stripe/resources/line_item.rb

@@ -9,7 +9,7 @@ module Stripe
       "item"
     end
 
-    class AdjustableQuantity < ::Stripe::StripeObject
+    class AdjustableQuantity < Stripe::StripeObject
       # Attribute for field enabled
       attr_reader :enabled
       # Attribute for field maximum
@@ -26,7 +26,7 @@ module Stripe
       end
     end
 
-    class Discount < ::Stripe::StripeObject
+    class Discount < Stripe::StripeObject
       # The amount discounted.
       attr_reader :amount
       # A discount represents the actual application of a [coupon](https://stripe.com/docs/api#coupons) or [promotion code](https://stripe.com/docs/api#promotion_codes).
@@ -44,7 +44,7 @@ module Stripe
       end
     end
 
-    class Display < ::Stripe::StripeObject
+    class Display < Stripe::StripeObject
       # Attribute for field description
       attr_reader :description
       # Attribute for field images
@@ -61,7 +61,7 @@ module Stripe
       end
     end
 
-    class TaxCalculationReference < ::Stripe::StripeObject
+    class TaxCalculationReference < Stripe::StripeObject
       # The calculation identifier for tax calculation response.
       attr_reader :calculation_id
       # The calculation identifier for tax calculation response line item.
@@ -76,7 +76,7 @@ module Stripe
       end
     end
 
-    class Tax < ::Stripe::StripeObject
+    class Tax < Stripe::StripeObject
       # Amount of tax applied for this rate.
       attr_reader :amount
       # Tax rates can be applied to [invoices](/invoicing/taxes/tax-rates), [subscriptions](/billing/taxes/tax-rates) and [Checkout Sessions](/payments/checkout/use-manual-tax-rates) to collect tax.

data/lib/stripe/resources/mandate.rb

@@ -11,8 +11,8 @@ module Stripe
       "mandate"
     end
 
-    class CustomerAcceptance < ::Stripe::StripeObject
-      class Offline < ::Stripe::StripeObject
+    class CustomerAcceptance < Stripe::StripeObject
+      class Offline < Stripe::StripeObject
         def self.inner_class_types
           @inner_class_types = {}
         end
@@ -22,7 +22,7 @@ module Stripe
         end
       end
 
-      class Online < ::Stripe::StripeObject
+      class Online < Stripe::StripeObject
         # The customer accepts the mandate from this IP address.
         attr_reader :ip_address
         # The customer accepts the mandate using the user agent of the browser.
@@ -54,7 +54,7 @@ module Stripe
       end
     end
 
-    class MultiUse < ::Stripe::StripeObject
+    class MultiUse < Stripe::StripeObject
       # The amount of the payment on a multi use mandate.
       attr_reader :amount
       # The currency of the payment on a multi use mandate.
@@ -69,8 +69,8 @@ module Stripe
       end
     end
 
-    class PaymentMethodDetails < ::Stripe::StripeObject
-      class AcssDebit < ::Stripe::StripeObject
+    class PaymentMethodDetails < Stripe::StripeObject
+      class AcssDebit < Stripe::StripeObject
         # List of Stripe products where this mandate can be selected automatically.
         attr_reader :default_for
         # Description of the interval. Only required if the 'payment_schedule' parameter is 'interval' or 'combined'.
@@ -89,7 +89,7 @@ module Stripe
         end
       end
 
-      class AmazonPay < ::Stripe::StripeObject
+      class AmazonPay < Stripe::StripeObject
         def self.inner_class_types
           @inner_class_types = {}
         end
@@ -99,7 +99,7 @@ module Stripe
         end
       end
 
-      class AuBecsDebit < ::Stripe::StripeObject
+      class AuBecsDebit < Stripe::StripeObject
         # The URL of the mandate. This URL generally contains sensitive information about the customer and should be shared with them exclusively.
         attr_reader :url
 
@@ -112,7 +112,7 @@ module Stripe
         end
       end
 
-      class BacsDebit < ::Stripe::StripeObject
+      class BacsDebit < Stripe::StripeObject
         # The status of the mandate on the Bacs network. Can be one of `pending`, `revoked`, `refused`, or `accepted`.
         attr_reader :network_status
         # The unique reference identifying the mandate on the Bacs network.
@@ -131,7 +131,7 @@ module Stripe
         end
       end
 
-      class Card < ::Stripe::StripeObject
+      class Card < Stripe::StripeObject
         def self.inner_class_types
           @inner_class_types = {}
         end
@@ -141,7 +141,7 @@ module Stripe
         end
       end
 
-      class Cashapp < ::Stripe::StripeObject
+      class Cashapp < Stripe::StripeObject
         def self.inner_class_types
           @inner_class_types = {}
         end
@@ -151,7 +151,7 @@ module Stripe
         end
       end
 
-      class KakaoPay < ::Stripe::StripeObject
+      class KakaoPay < Stripe::StripeObject
         def self.inner_class_types
           @inner_class_types = {}
         end
@@ -161,7 +161,7 @@ module Stripe
         end
       end
 
-      class Klarna < ::Stripe::StripeObject
+      class Klarna < Stripe::StripeObject
         def self.inner_class_types
           @inner_class_types = {}
         end
@@ -171,7 +171,7 @@ module Stripe
         end
       end
 
-      class KrCard < ::Stripe::StripeObject
+      class KrCard < Stripe::StripeObject
         def self.inner_class_types
           @inner_class_types = {}
         end
@@ -181,7 +181,7 @@ module Stripe
         end
       end
 
-      class Link < ::Stripe::StripeObject
+      class Link < Stripe::StripeObject
         def self.inner_class_types
           @inner_class_types = {}
         end
@@ -191,7 +191,7 @@ module Stripe
         end
       end
 
-      class NaverPay < ::Stripe::StripeObject
+      class NaverPay < Stripe::StripeObject
         def self.inner_class_types
           @inner_class_types = {}
         end
@@ -201,7 +201,7 @@ module Stripe
         end
       end
 
-      class NzBankAccount < ::Stripe::StripeObject
+      class NzBankAccount < Stripe::StripeObject
         def self.inner_class_types
           @inner_class_types = {}
         end
@@ -211,7 +211,7 @@ module Stripe
         end
       end
 
-      class Paypal < ::Stripe::StripeObject
+      class Paypal < Stripe::StripeObject
         # The PayPal Billing Agreement ID (BAID). This is an ID generated by PayPal which represents the mandate between the merchant and the customer.
         attr_reader :billing_agreement_id
         # Uniquely identifies this particular PayPal account. You can use this attribute to check whether two PayPal accounts are the same.
@@ -231,7 +231,7 @@ module Stripe
         end
       end
 
-      class Payto < ::Stripe::StripeObject
+      class Payto < Stripe::StripeObject
         # Amount that will be collected. It is required when `amount_type` is `fixed`.
         attr_reader :amount
         # The type of amount that will be collected. The amount charged must be exact or up to the value of `amount` param for `fixed` or `maximum` type respectively.
@@ -256,7 +256,7 @@ module Stripe
         end
       end
 
-      class Pix < ::Stripe::StripeObject
+      class Pix < Stripe::StripeObject
         # Determines if the amount includes the IOF tax.
         attr_reader :amount_includes_iof
         # Type of amount.
@@ -279,7 +279,7 @@ module Stripe
         end
       end
 
-      class RevolutPay < ::Stripe::StripeObject
+      class RevolutPay < Stripe::StripeObject
         def self.inner_class_types
           @inner_class_types = {}
         end
@@ -289,7 +289,7 @@ module Stripe
         end
       end
 
-      class SepaDebit < ::Stripe::StripeObject
+      class SepaDebit < Stripe::StripeObject
         # The unique reference of the mandate.
         attr_reader :reference
         # The URL of the mandate. This URL generally contains sensitive information about the customer and should be shared with them exclusively.
@@ -304,7 +304,7 @@ module Stripe
         end
       end
 
-      class UsBankAccount < ::Stripe::StripeObject
+      class UsBankAccount < Stripe::StripeObject
         # Mandate collection method
         attr_reader :collection_method
 
@@ -383,7 +383,7 @@ module Stripe
       end
     end
 
-    class SingleUse < ::Stripe::StripeObject
+    class SingleUse < Stripe::StripeObject
       # The amount of the payment on a single use mandate.
       attr_reader :amount
       # The currency of the payment on a single use mandate.