stripe 17.0.1 → 17.1.0

data/lib/stripe/resources/payout.rb

@@ -20,7 +20,7 @@ module Stripe
       "payout"
     end
 
-    class TraceId < Stripe::StripeObject
+    class TraceId < ::Stripe::StripeObject
       # Possible values are `pending`, `supported`, and `unsupported`. When `payout.status` is `pending` or `in_transit`, this will be `pending`. When the payout transitions to `paid`, `failed`, or `canceled`, this status will become `supported` or `unsupported` shortly after in most cases. In some cases, this may appear as `pending` for up to 10 days after `arrival_date` until transitioning to `supported` or `unsupported`.
       attr_reader :status
       # The trace ID value if `trace_id.status` is `supported`, otherwise `nil`.
@@ -123,7 +123,7 @@ module Stripe
       request_stripe_object(method: :get, path: "/v1/payouts", params: params, opts: opts)
     end
 
-    # Reverses a payout by debiting the destination bank account. At this time, you can only reverse payouts for connected accounts to US bank accounts. If the payout is manual and in the pending status, use /v1/payouts/:id/cancel instead.
+    # Reverses a payout by debiting the destination bank account. At this time, you can only reverse payouts for connected accounts to US and Canadian bank accounts. If the payout is manual and in the pending status, use /v1/payouts/:id/cancel instead.
     #
     # By requesting a reversal through /v1/payouts/:id/reverse, you confirm that the authorized signatory of the selected bank account authorizes the debit on the bank account and that no other authorization is required.
     def reverse(params = {}, opts = {})
@@ -135,7 +135,7 @@ module Stripe
       )
     end
 
-    # Reverses a payout by debiting the destination bank account. At this time, you can only reverse payouts for connected accounts to US bank accounts. If the payout is manual and in the pending status, use /v1/payouts/:id/cancel instead.
+    # Reverses a payout by debiting the destination bank account. At this time, you can only reverse payouts for connected accounts to US and Canadian bank accounts. If the payout is manual and in the pending status, use /v1/payouts/:id/cancel instead.
     #
     # By requesting a reversal through /v1/payouts/:id/reverse, you confirm that the authorized signatory of the selected bank account authorizes the debit on the bank account and that no other authorization is required.
     def self.reverse(payout, params = {}, opts = {})

data/lib/stripe/resources/person.rb

@@ -15,8 +15,8 @@ module Stripe
       "person"
     end
 
-    class AdditionalTosAcceptances < Stripe::StripeObject
-      class Account < Stripe::StripeObject
+    class AdditionalTosAcceptances < ::Stripe::StripeObject
+      class Account < ::Stripe::StripeObject
         # The Unix timestamp marking when the legal guardian accepted the service agreement.
         attr_reader :date
         # The IP address from which the legal guardian accepted the service agreement.
@@ -44,7 +44,7 @@ module Stripe
       end
     end
 
-    class Address < Stripe::StripeObject
+    class Address < ::Stripe::StripeObject
       # City, district, suburb, town, or village.
       attr_reader :city
       # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
@@ -67,7 +67,7 @@ module Stripe
       end
     end
 
-    class AddressKana < Stripe::StripeObject
+    class AddressKana < ::Stripe::StripeObject
       # City/Ward.
       attr_reader :city
       # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
@@ -92,7 +92,7 @@ module Stripe
       end
     end
 
-    class AddressKanji < Stripe::StripeObject
+    class AddressKanji < ::Stripe::StripeObject
       # City/Ward.
       attr_reader :city
       # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
@@ -117,7 +117,7 @@ module Stripe
       end
     end
 
-    class Dob < Stripe::StripeObject
+    class Dob < ::Stripe::StripeObject
       # The day of birth, between 1 and 31.
       attr_reader :day
       # The month of birth, between 1 and 12.
@@ -134,8 +134,8 @@ module Stripe
       end
     end
 
-    class FutureRequirements < Stripe::StripeObject
-      class Alternative < Stripe::StripeObject
+    class FutureRequirements < ::Stripe::StripeObject
+      class Alternative < ::Stripe::StripeObject
         # Fields that can be provided to satisfy all fields in `original_fields_due`.
         attr_reader :alternative_fields_due
         # Fields that are due and can be satisfied by providing all fields in `alternative_fields_due`.
@@ -150,7 +150,7 @@ module Stripe
         end
       end
 
-      class Error < Stripe::StripeObject
+      class Error < ::Stripe::StripeObject
         # The code for the type of error.
         attr_reader :code
         # An informative message that indicates the error type and provides additional details about the error.
@@ -188,7 +188,7 @@ module Stripe
       end
     end
 
-    class RegisteredAddress < Stripe::StripeObject
+    class RegisteredAddress < ::Stripe::StripeObject
       # City, district, suburb, town, or village.
       attr_reader :city
       # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
@@ -211,7 +211,7 @@ module Stripe
       end
     end
 
-    class Relationship < Stripe::StripeObject
+    class Relationship < ::Stripe::StripeObject
       # Whether the person is the authorizer of the account's representative.
       attr_reader :authorizer
       # Whether the person is a director of the account's legal entity. Directors are typically members of the governing board of the company, or responsible for ensuring the company meets its regulatory obligations.
@@ -238,8 +238,8 @@ module Stripe
       end
     end
 
-    class Requirements < Stripe::StripeObject
-      class Alternative < Stripe::StripeObject
+    class Requirements < ::Stripe::StripeObject
+      class Alternative < ::Stripe::StripeObject
         # Fields that can be provided to satisfy all fields in `original_fields_due`.
         attr_reader :alternative_fields_due
         # Fields that are due and can be satisfied by providing all fields in `alternative_fields_due`.
@@ -254,7 +254,7 @@ module Stripe
         end
       end
 
-      class Error < Stripe::StripeObject
+      class Error < ::Stripe::StripeObject
         # The code for the type of error.
         attr_reader :code
         # An informative message that indicates the error type and provides additional details about the error.
@@ -292,8 +292,8 @@ module Stripe
       end
     end
 
-    class UsCfpbData < Stripe::StripeObject
-      class EthnicityDetails < Stripe::StripeObject
+    class UsCfpbData < ::Stripe::StripeObject
+      class EthnicityDetails < ::Stripe::StripeObject
         # The persons ethnicity
         attr_reader :ethnicity
         # Please specify your origin, when other is selected.
@@ -308,7 +308,7 @@ module Stripe
         end
       end
 
-      class RaceDetails < Stripe::StripeObject
+      class RaceDetails < ::Stripe::StripeObject
         # The persons race.
         attr_reader :race
         # Please specify your race, when other is selected.
@@ -338,8 +338,8 @@ module Stripe
       end
     end
 
-    class Verification < Stripe::StripeObject
-      class AdditionalDocument < Stripe::StripeObject
+    class Verification < ::Stripe::StripeObject
+      class AdditionalDocument < ::Stripe::StripeObject
         # The back of an ID returned by a [file upload](https://stripe.com/docs/api#create_file) with a `purpose` value of `identity_document`.
         attr_reader :back
         # A user-displayable string describing the verification state of this document. For example, if a document is uploaded and the picture is too fuzzy, this may say "Identity document is too unclear to read".
@@ -358,7 +358,7 @@ module Stripe
         end
       end
 
-      class Document < Stripe::StripeObject
+      class Document < ::Stripe::StripeObject
         # The back of an ID returned by a [file upload](https://stripe.com/docs/api#create_file) with a `purpose` value of `identity_document`.
         attr_reader :back
         # A user-displayable string describing the verification state of this document. For example, if a document is uploaded and the picture is too fuzzy, this may say "Identity document is too unclear to read".

data/lib/stripe/resources/plan.rb

@@ -21,7 +21,7 @@ module Stripe
       "plan"
     end
 
-    class Tier < Stripe::StripeObject
+    class Tier < ::Stripe::StripeObject
       # Price for the entire tier.
       attr_reader :flat_amount
       # Same as `flat_amount`, but contains a decimal value with at most 12 decimal places.
@@ -42,7 +42,7 @@ module Stripe
       end
     end
 
-    class TransformUsage < Stripe::StripeObject
+    class TransformUsage < ::Stripe::StripeObject
       # Divide usage by this number.
       attr_reader :divide_by
       # After division, either round the result `up` or `down`.

data/lib/stripe/resources/price.rb

@@ -19,8 +19,8 @@ module Stripe
       "price"
     end
 
-    class CurrencyOptions < Stripe::StripeObject
-      class CustomUnitAmount < Stripe::StripeObject
+    class CurrencyOptions < ::Stripe::StripeObject
+      class CustomUnitAmount < ::Stripe::StripeObject
         # The maximum unit amount the customer can specify for this item.
         attr_reader :maximum
         # The minimum unit amount the customer can specify for this item. Must be at least the minimum charge amount.
@@ -37,7 +37,7 @@ module Stripe
         end
       end
 
-      class Tier < Stripe::StripeObject
+      class Tier < ::Stripe::StripeObject
         # Price for the entire tier.
         attr_reader :flat_amount
         # Same as `flat_amount`, but contains a decimal value with at most 12 decimal places.
@@ -77,7 +77,7 @@ module Stripe
       end
     end
 
-    class CustomUnitAmount < Stripe::StripeObject
+    class CustomUnitAmount < ::Stripe::StripeObject
       # The maximum unit amount the customer can specify for this item.
       attr_reader :maximum
       # The minimum unit amount the customer can specify for this item. Must be at least the minimum charge amount.
@@ -94,7 +94,7 @@ module Stripe
       end
     end
 
-    class Recurring < Stripe::StripeObject
+    class Recurring < ::Stripe::StripeObject
       # The frequency at which a subscription is billed. One of `day`, `week`, `month` or `year`.
       attr_reader :interval
       # The number of intervals (specified in the `interval` attribute) between subscription billings. For example, `interval=month` and `interval_count=3` bills every 3 months.
@@ -115,7 +115,7 @@ module Stripe
       end
     end
 
-    class Tier < Stripe::StripeObject
+    class Tier < ::Stripe::StripeObject
       # Price for the entire tier.
       attr_reader :flat_amount
       # Same as `flat_amount`, but contains a decimal value with at most 12 decimal places.
@@ -136,7 +136,7 @@ module Stripe
       end
     end
 
-    class TransformQuantity < Stripe::StripeObject
+    class TransformQuantity < ::Stripe::StripeObject
       # Divide usage by this number.
       attr_reader :divide_by
       # After division, either round the result `up` or `down`.

data/lib/stripe/resources/product.rb

@@ -25,7 +25,7 @@ module Stripe
 
     nested_resource_class_methods :feature, operations: %i[create retrieve delete list]
 
-    class MarketingFeature < Stripe::StripeObject
+    class MarketingFeature < ::Stripe::StripeObject
       # The marketing feature name. Up to 80 characters long.
       attr_reader :name
 
@@ -38,7 +38,7 @@ module Stripe
       end
     end
 
-    class PackageDimensions < Stripe::StripeObject
+    class PackageDimensions < ::Stripe::StripeObject
       # Height, in inches.
       attr_reader :height
       # Length, in inches.

data/lib/stripe/resources/promotion_code.rb

@@ -17,7 +17,7 @@ module Stripe
       "promotion_code"
     end
 
-    class Promotion < Stripe::StripeObject
+    class Promotion < ::Stripe::StripeObject
       # If promotion `type` is `coupon`, the coupon for this promotion.
       attr_reader :coupon
       # The type of promotion.
@@ -32,8 +32,8 @@ module Stripe
       end
     end
 
-    class Restrictions < Stripe::StripeObject
-      class CurrencyOptions < Stripe::StripeObject
+    class Restrictions < ::Stripe::StripeObject
+      class CurrencyOptions < ::Stripe::StripeObject
         # Minimum amount required to redeem this Promotion Code into a Coupon (e.g., a purchase must be $100 or more to work).
         attr_reader :minimum_amount
 

data/lib/stripe/resources/quote.rb

@@ -14,8 +14,8 @@ module Stripe
       "quote"
     end
 
-    class AutomaticTax < Stripe::StripeObject
-      class Liability < Stripe::StripeObject
+    class AutomaticTax < ::Stripe::StripeObject
+      class Liability < ::Stripe::StripeObject
         # The connected account being referenced when `type` is `account`.
         attr_reader :account
         # Type of the account referenced.
@@ -47,11 +47,11 @@ module Stripe
       end
     end
 
-    class Computed < Stripe::StripeObject
-      class Recurring < Stripe::StripeObject
-        class TotalDetails < Stripe::StripeObject
-          class Breakdown < Stripe::StripeObject
-            class Discount < Stripe::StripeObject
+    class Computed < ::Stripe::StripeObject
+      class Recurring < ::Stripe::StripeObject
+        class TotalDetails < ::Stripe::StripeObject
+          class Breakdown < ::Stripe::StripeObject
+            class Discount < ::Stripe::StripeObject
               # The amount discounted.
               attr_reader :amount
               # A discount represents the actual application of a [coupon](https://stripe.com/docs/api#coupons) or [promotion code](https://stripe.com/docs/api#promotion_codes).
@@ -69,7 +69,7 @@ module Stripe
               end
             end
 
-            class Tax < Stripe::StripeObject
+            class Tax < ::Stripe::StripeObject
               # Amount of tax applied for this rate.
               attr_reader :amount
               # Tax rates can be applied to [invoices](/invoicing/taxes/tax-rates), [subscriptions](/billing/taxes/tax-rates) and [Checkout Sessions](/payments/checkout/use-manual-tax-rates) to collect tax.
@@ -139,10 +139,10 @@ module Stripe
         end
       end
 
-      class Upfront < Stripe::StripeObject
-        class TotalDetails < Stripe::StripeObject
-          class Breakdown < Stripe::StripeObject
-            class Discount < Stripe::StripeObject
+      class Upfront < ::Stripe::StripeObject
+        class TotalDetails < ::Stripe::StripeObject
+          class Breakdown < ::Stripe::StripeObject
+            class Discount < ::Stripe::StripeObject
               # The amount discounted.
               attr_reader :amount
               # A discount represents the actual application of a [coupon](https://stripe.com/docs/api#coupons) or [promotion code](https://stripe.com/docs/api#promotion_codes).
@@ -160,7 +160,7 @@ module Stripe
               end
             end
 
-            class Tax < Stripe::StripeObject
+            class Tax < ::Stripe::StripeObject
               # Amount of tax applied for this rate.
               attr_reader :amount
               # Tax rates can be applied to [invoices](/invoicing/taxes/tax-rates), [subscriptions](/billing/taxes/tax-rates) and [Checkout Sessions](/payments/checkout/use-manual-tax-rates) to collect tax.
@@ -241,7 +241,7 @@ module Stripe
       end
     end
 
-    class FromQuote < Stripe::StripeObject
+    class FromQuote < ::Stripe::StripeObject
       # Whether this quote is a revision of a different quote.
       attr_reader :is_revision
       # The quote that was cloned.
@@ -256,8 +256,8 @@ module Stripe
       end
     end
 
-    class InvoiceSettings < Stripe::StripeObject
-      class Issuer < Stripe::StripeObject
+    class InvoiceSettings < ::Stripe::StripeObject
+      class Issuer < ::Stripe::StripeObject
         # The connected account being referenced when `type` is `account`.
         attr_reader :account
         # Type of the account referenced.
@@ -285,7 +285,7 @@ module Stripe
       end
     end
 
-    class StatusTransitions < Stripe::StripeObject
+    class StatusTransitions < ::Stripe::StripeObject
       # The time that the quote was accepted. Measured in seconds since Unix epoch.
       attr_reader :accepted_at
       # The time that the quote was canceled. Measured in seconds since Unix epoch.
@@ -302,9 +302,9 @@ module Stripe
       end
     end
 
-    class SubscriptionData < Stripe::StripeObject
-      class BillingMode < Stripe::StripeObject
-        class Flexible < Stripe::StripeObject
+    class SubscriptionData < ::Stripe::StripeObject
+      class BillingMode < ::Stripe::StripeObject
+        class Flexible < ::Stripe::StripeObject
           # Controls how invoices and invoice items display proration amounts and discount amounts.
           attr_reader :proration_discounts
 
@@ -349,9 +349,9 @@ module Stripe
       end
     end
 
-    class TotalDetails < Stripe::StripeObject
-      class Breakdown < Stripe::StripeObject
-        class Discount < Stripe::StripeObject
+    class TotalDetails < ::Stripe::StripeObject
+      class Breakdown < ::Stripe::StripeObject
+        class Discount < ::Stripe::StripeObject
           # The amount discounted.
           attr_reader :amount
           # A discount represents the actual application of a [coupon](https://stripe.com/docs/api#coupons) or [promotion code](https://stripe.com/docs/api#promotion_codes).
@@ -369,7 +369,7 @@ module Stripe
           end
         end
 
-        class Tax < Stripe::StripeObject
+        class Tax < ::Stripe::StripeObject
           # Amount of tax applied for this rate.
           attr_reader :amount
           # Tax rates can be applied to [invoices](/invoicing/taxes/tax-rates), [subscriptions](/billing/taxes/tax-rates) and [Checkout Sessions](/payments/checkout/use-manual-tax-rates) to collect tax.
@@ -420,7 +420,7 @@ module Stripe
       end
     end
 
-    class TransferData < Stripe::StripeObject
+    class TransferData < ::Stripe::StripeObject
       # The amount in cents (or local equivalent) that will be transferred to the destination account when the invoice is paid. By default, the entire amount is transferred to the destination.
       attr_reader :amount
       # A non-negative decimal between 0 and 100, with at most two decimal places. This represents the percentage of the subscription invoice total that will be transferred to the destination account. By default, the entire amount will be transferred to the destination.