stripe 16.1.0.pre.beta.1 → 17.1.0.pre.alpha.1

data/lib/stripe/resources/v2/money_management/outbound_transfer.rb

@@ -11,7 +11,7 @@ module Stripe
           "v2.money_management.outbound_transfer"
         end
 
-        class DeliveryOptions < Stripe::StripeObject
+        class DeliveryOptions < ::Stripe::StripeObject
           # Open Enum. Method for bank account.
           attr_reader :bank_account
 
@@ -24,7 +24,7 @@ module Stripe
           end
         end
 
-        class From < Stripe::StripeObject
+        class From < ::Stripe::StripeObject
           # The monetary amount debited from the sender, only set on responses.
           attr_reader :debited
           # The FinancialAccount that funds were pulled from.
@@ -39,8 +39,8 @@ module Stripe
           end
         end
 
-        class StatusDetails < Stripe::StripeObject
-          class Failed < Stripe::StripeObject
+        class StatusDetails < ::Stripe::StripeObject
+          class Failed < ::Stripe::StripeObject
             # Open Enum. The `failed` status reason.
             attr_reader :reason
 
@@ -53,7 +53,7 @@ module Stripe
             end
           end
 
-          class Returned < Stripe::StripeObject
+          class Returned < ::Stripe::StripeObject
             # Open Enum. The `returned` status reason.
             attr_reader :reason
 
@@ -79,7 +79,7 @@ module Stripe
           end
         end
 
-        class StatusTransitions < Stripe::StripeObject
+        class StatusTransitions < ::Stripe::StripeObject
           # Timestamp describing when an OutboundTransfer changed status to `canceled`.
           # Represented as a RFC 3339 date & time UTC value in millisecond precision, for example: 2022-09-18T13:22:18.123Z.
           attr_reader :canceled_at
@@ -102,7 +102,7 @@ module Stripe
           end
         end
 
-        class To < Stripe::StripeObject
+        class To < ::Stripe::StripeObject
           # The monetary amount being credited to the destination.
           attr_reader :credited
           # The payout method which the OutboundTransfer uses to send payout.
@@ -117,7 +117,7 @@ module Stripe
           end
         end
 
-        class TraceId < Stripe::StripeObject
+        class TraceId < ::Stripe::StripeObject
           # Possible values are `pending`, `supported`, and `unsupported`. Initially set to `pending`, it changes to
           # `supported` when the recipient bank provides a trace ID, or `unsupported` if the recipient bank doesn't support it.
           # Note that this status may not align with the OutboundPayment or OutboundTransfer status and can remain `pending`
@@ -158,6 +158,8 @@ module Stripe
         attr_reader :object
         # A link to the Stripe-hosted receipt for this OutboundTransfer. The receipt link remains active for 60 days from the OutboundTransfer creation date. After this period, the link will expire and the receipt url value will be null.
         attr_reader :receipt_url
+        # The recipient verification id for this OutboundTransfer. Only required for countries with regulatory mandates to verify recipient names before OutboundTransfer creation.
+        attr_reader :recipient_verification
         # The description that appears on the receiving end for an OutboundTransfer (for example, bank statement for external bank transfer). It will default to `STRIPE` if not set on the account settings.
         attr_reader :statement_descriptor
         # Closed Enum. Current status of the OutboundTransfer: `processing`, `failed`, `posted`, `returned`, `canceled`.

data/lib/stripe/resources/v2/money_management/payout_method.rb

@@ -11,7 +11,7 @@ module Stripe
           "v2.money_management.payout_method"
         end
 
-        class UsageStatus < Stripe::StripeObject
+        class UsageStatus < ::Stripe::StripeObject
           # Payments status - used when sending OutboundPayments (sending funds to recipients).
           attr_reader :payments
           # Transfers status - used when making an OutboundTransfer (sending funds to yourself).
@@ -26,7 +26,7 @@ module Stripe
           end
         end
 
-        class BankAccount < Stripe::StripeObject
+        class BankAccount < ::Stripe::StripeObject
           # Whether this PayoutMethodBankAccount object was archived. PayoutMethodBankAccount objects can be archived through
           # the /archive API, and they will not be automatically archived by Stripe. Archived PayoutMethodBankAccount objects
           # cannot be used as payout methods and will not appear in the payout method list.
@@ -55,7 +55,7 @@ module Stripe
           end
         end
 
-        class Card < Stripe::StripeObject
+        class Card < ::Stripe::StripeObject
           # Whether the PayoutMethodCard object was archived. PayoutMethodCard objects can be archived through
           # the /archive API, and they will not be automatically archived by Stripe. Archived PayoutMethodCard objects
           # cannot be used as payout methods and will not appear in the payout method list.
@@ -75,6 +75,27 @@ module Stripe
             @field_remappings = {}
           end
         end
+
+        class CryptoWallet < ::Stripe::StripeObject
+          # Destination wallet address.
+          attr_reader :address
+          # Whether the crypto wallet was archived. Crypto wallets can be archived through the /archive API,
+          # and they will not be automatically archived by Stripe. Archived crypto wallets cannot be used as
+          # payout method and will not appear in the payout method list.
+          attr_reader :archived
+          # Optional field, required if network supports memos (only "stellar" currently).
+          attr_reader :memo
+          # Which rail is being used to make an outbound money movement to this wallet.
+          attr_reader :network
+
+          def self.inner_class_types
+            @inner_class_types = {}
+          end
+
+          def self.field_remappings
+            @field_remappings = {}
+          end
+        end
         # A set of available payout speeds for this payout method.
         attr_reader :available_payout_speeds
         # Created timestamp.
@@ -95,9 +116,16 @@ module Stripe
         attr_reader :bank_account
         # The PayoutMethodCard object details.
         attr_reader :card
+        # The PayoutMethodCryptoWallet object details.
+        attr_reader :crypto_wallet
 
         def self.inner_class_types
-          @inner_class_types = { usage_status: UsageStatus, bank_account: BankAccount, card: Card }
+          @inner_class_types = {
+            usage_status: UsageStatus,
+            bank_account: BankAccount,
+            card: Card,
+            crypto_wallet: CryptoWallet,
+          }
         end
 
         def self.field_remappings

data/lib/stripe/resources/v2/money_management/payout_methods_bank_account_spec.rb

@@ -11,9 +11,9 @@ module Stripe
           "v2.money_management.payout_methods_bank_account_spec"
         end
 
-        class Countries < Stripe::StripeObject
-          class Field < Stripe::StripeObject
-            class LocalNameHuman < Stripe::StripeObject
+        class Countries < ::Stripe::StripeObject
+          class Field < ::Stripe::StripeObject
+            class LocalNameHuman < ::Stripe::StripeObject
               # The default content of the localizable string.
               attr_reader :content
               # A unique key representing the instance of this localizable string.

data/lib/stripe/resources/v2/money_management/received_credit.rb

@@ -11,8 +11,8 @@ module Stripe
           "v2.money_management.received_credit"
         end
 
-        class StatusDetails < Stripe::StripeObject
-          class Failed < Stripe::StripeObject
+        class StatusDetails < ::Stripe::StripeObject
+          class Failed < ::Stripe::StripeObject
             # Open Enum. The `failed` status reason.
             attr_reader :reason
 
@@ -25,7 +25,7 @@ module Stripe
             end
           end
 
-          class Returned < Stripe::StripeObject
+          class Returned < ::Stripe::StripeObject
             # Open Enum. The `returned` status reason.
             attr_reader :reason
 
@@ -51,7 +51,7 @@ module Stripe
           end
         end
 
-        class StatusTransitions < Stripe::StripeObject
+        class StatusTransitions < ::Stripe::StripeObject
           # Timestamp describing when the ReceivedCredit was marked as `failed`.
           # Represented as a RFC 3339 date & time UTC value in millisecond precision, for example: 2022-09-18T13:22:18.123Z.
           attr_reader :failed_at
@@ -71,7 +71,7 @@ module Stripe
           end
         end
 
-        class BalanceTransfer < Stripe::StripeObject
+        class BalanceTransfer < ::Stripe::StripeObject
           # The ID of the account that owns the source object originated the ReceivedCredit.
           attr_reader :from_account
           # Open Enum. The type of Stripe Money Movement that originated the ReceivedCredit.
@@ -92,8 +92,8 @@ module Stripe
           end
         end
 
-        class BankTransfer < Stripe::StripeObject
-          class GbBankAccount < Stripe::StripeObject
+        class BankTransfer < ::Stripe::StripeObject
+          class GbBankAccount < ::Stripe::StripeObject
             # The bank name the transfer was received from.
             attr_reader :account_holder_name
             # The bank name the transfer was received from.
@@ -114,7 +114,7 @@ module Stripe
             end
           end
 
-          class SepaBankAccount < Stripe::StripeObject
+          class SepaBankAccount < ::Stripe::StripeObject
             # The account holder name of the bank account the transfer was received from.
             attr_reader :account_holder_name
             # The bank name the transfer was received from.
@@ -137,7 +137,7 @@ module Stripe
             end
           end
 
-          class UsBankAccount < Stripe::StripeObject
+          class UsBankAccount < ::Stripe::StripeObject
             # The bank name the transfer was received from.
             attr_reader :bank_name
             # The last 4 digits of the account number that originated the transfer.

data/lib/stripe/resources/v2/money_management/received_debit.rb

@@ -11,8 +11,8 @@ module Stripe
           "v2.money_management.received_debit"
         end
 
-        class StatusDetails < Stripe::StripeObject
-          class Failed < Stripe::StripeObject
+        class StatusDetails < ::Stripe::StripeObject
+          class Failed < ::Stripe::StripeObject
             # Open Enum. The reason for the failure of the ReceivedDebit.
             attr_reader :reason
 
@@ -37,7 +37,7 @@ module Stripe
           end
         end
 
-        class StatusTransitions < Stripe::StripeObject
+        class StatusTransitions < ::Stripe::StripeObject
           # The time when the ReceivedDebit was marked as `canceled`.
           # Represented as a RFC 3339 date & time UTC value in millisecond precision, for example: `2022-09-18T13:22:18.123Z`.
           attr_reader :canceled_at
@@ -57,8 +57,8 @@ module Stripe
           end
         end
 
-        class BankTransfer < Stripe::StripeObject
-          class UsBankAccount < Stripe::StripeObject
+        class BankTransfer < ::Stripe::StripeObject
+          class UsBankAccount < ::Stripe::StripeObject
             # The name of the bank the debit originated from.
             attr_reader :bank_name
             # Open Enum. The bank network the debit was originated on.
@@ -76,6 +76,8 @@ module Stripe
           end
           # The Financial Address that was debited.
           attr_reader :financial_address
+          # Open Enum. Indicates the origin type through which this debit was initiated.
+          attr_reader :origin_type
           # Open Enum. The type of the payment method used to originate the debit.
           attr_reader :payment_method_type
           # The statement descriptor set by the originator of the debit.

data/lib/stripe/resources/v2/money_management/recipient_verification.rb

@@ -0,0 +1,83 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module V2
+    module MoneyManagement
+      # RecipientVerification represents a verification of recipient you intend to send funds to.
+      class RecipientVerification < APIResource
+        OBJECT_NAME = "v2.money_management.recipient_verification"
+        def self.object_name
+          "v2.money_management.recipient_verification"
+        end
+
+        class MatchResultDetails < ::Stripe::StripeObject
+          # The account name associated with the bank account as provided by the VoP provider, only present if there is a match or close match.
+          attr_reader :matched_name
+          # A message describing the match result.
+          attr_reader :message
+          # The name associated with the provided recipient.
+          attr_reader :provided_name
+
+          def self.inner_class_types
+            @inner_class_types = {}
+          end
+
+          def self.field_remappings
+            @field_remappings = {}
+          end
+        end
+
+        class StatusTransitions < ::Stripe::StripeObject
+          # Timestamp describing when a RecipientVerification changed status to `acknowledged`.
+          # Represented as a RFC 3339 date & time UTC value in millisecond precision, for example: 2022-09-18T13:22:18.123Z.
+          attr_reader :acknowledged_at
+          # Timestamp describing when a RecipientVerification changed status to `consumed`.
+          # Represented as a RFC 3339 date & time UTC value in millisecond precision, for example: 2022-09-18T13:22:18.123Z.
+          attr_reader :consumed_at
+
+          def self.inner_class_types
+            @inner_class_types = {}
+          end
+
+          def self.field_remappings
+            @field_remappings = {}
+          end
+        end
+        # The OBP/OBT ID that consumed this verification, present if one is successfully created.
+        attr_reader :consumed_by
+        # Time at which the RecipientVerification was created.
+        # Represented as a RFC 3339 date & time UTC value in millisecond precision, for example: 2022-09-18T13:22:18.123Z.
+        attr_reader :created
+        # Time at which the RecipientVerification expires, 5 minutes after the creation.
+        # Represented as a RFC 3339 date & time UTC value in millisecond precision, for example: 2022-09-18T13:22:18.123Z.
+        attr_reader :expires_at
+        # The ID of the RecipientVerification.
+        attr_reader :id
+        # Closed Enum. Match level of the RecipientVerification: `match`, `close_match`, `no_match`, `unavailable`.
+        attr_reader :match_result
+        # Details for the match result.
+        attr_reader :match_result_details
+        # String representing the object's type. Objects of the same type share the same value of the object field.
+        attr_reader :object
+        # Closed Enum. Current status of the RecipientVerification: `verified`, `consumed`, `expired`, `awaiting_acknowledgement`, `acknowledged`.
+        attr_reader :status
+        # Hash containing timestamps of when the object transitioned to a particular status.
+        attr_reader :status_transitions
+        # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
+        attr_reader :livemode
+
+        def self.inner_class_types
+          @inner_class_types = {
+            match_result_details: MatchResultDetails,
+            status_transitions: StatusTransitions,
+          }
+        end
+
+        def self.field_remappings
+          @field_remappings = {}
+        end
+      end
+    end
+  end
+end

data/lib/stripe/resources/v2/money_management/transaction.rb

@@ -11,7 +11,7 @@ module Stripe
           "v2.money_management.transaction"
         end
 
-        class BalanceImpact < Stripe::StripeObject
+        class BalanceImpact < ::Stripe::StripeObject
           # Impact to the available balance.
           attr_reader :available
           # Impact to the inbound_pending balance.
@@ -28,7 +28,7 @@ module Stripe
           end
         end
 
-        class Flow < Stripe::StripeObject
+        class Flow < ::Stripe::StripeObject
           # Open Enum. Type of the flow that created the Transaction. The field matching this value will contain the ID of the flow.
           attr_reader :type
           # If applicable, the ID of the Adjustment that created this Transaction.
@@ -57,7 +57,7 @@ module Stripe
           end
         end
 
-        class StatusTransitions < Stripe::StripeObject
+        class StatusTransitions < ::Stripe::StripeObject
           # The time at which the Transaction became posted. Only present if status == posted.
           attr_reader :posted_at
           # The time at which the Transaction became void. Only present if status == void.

data/lib/stripe/resources/v2/money_management/transaction_entry.rb

@@ -11,7 +11,7 @@ module Stripe
           "v2.money_management.transaction_entry"
         end
 
-        class BalanceImpact < Stripe::StripeObject
+        class BalanceImpact < ::Stripe::StripeObject
           # Impact to the available balance.
           attr_reader :available
           # Impact to the inbound_pending balance.
@@ -28,8 +28,8 @@ module Stripe
           end
         end
 
-        class TransactionDetails < Stripe::StripeObject
-          class Flow < Stripe::StripeObject
+        class TransactionDetails < ::Stripe::StripeObject
+          class Flow < ::Stripe::StripeObject
             # Open Enum. Type of the flow that created the Transaction. The field matching this value will contain the ID of the flow.
             attr_reader :type
             # If applicable, the ID of the Adjustment that created this Transaction.

data/lib/stripe/resources/v2/payments/off_session_payment.rb

@@ -11,9 +11,9 @@ module Stripe
           "v2.payments.off_session_payment"
         end
 
-        class AmountDetails < Stripe::StripeObject
-          class LineItem < Stripe::StripeObject
-            class Tax < Stripe::StripeObject
+        class AmountDetails < ::Stripe::StripeObject
+          class LineItem < ::Stripe::StripeObject
+            class Tax < ::Stripe::StripeObject
               # Total portion of the amount that is for tax.
               attr_reader :total_tax_amount
 
@@ -47,7 +47,7 @@ module Stripe
             end
           end
 
-          class Shipping < Stripe::StripeObject
+          class Shipping < ::Stripe::StripeObject
             # Portion of the amount that is for shipping.
             attr_reader :amount
             # The postal code that represents the shipping source.
@@ -64,7 +64,7 @@ module Stripe
             end
           end
 
-          class Tax < Stripe::StripeObject
+          class Tax < ::Stripe::StripeObject
             # Total portion of the amount that is for tax.
             attr_reader :total_tax_amount
 
@@ -94,7 +94,7 @@ module Stripe
           end
         end
 
-        class Capture < Stripe::StripeObject
+        class Capture < ::Stripe::StripeObject
           # The timestamp when this payment is no longer eligible to be captured.
           attr_reader :capture_before
           # The method to use to capture the payment.
@@ -109,7 +109,7 @@ module Stripe
           end
         end
 
-        class PaymentsOrchestration < Stripe::StripeObject
+        class PaymentsOrchestration < ::Stripe::StripeObject
           # True when you want to enable payments orchestration for this off-session payment. False otherwise.
           attr_reader :enabled
 
@@ -122,7 +122,7 @@ module Stripe
           end
         end
 
-        class RetryDetails < Stripe::StripeObject
+        class RetryDetails < ::Stripe::StripeObject
           # Number of authorization attempts so far.
           attr_reader :attempts
           # The pre-configured retry policy to use for the payment.
@@ -139,7 +139,7 @@ module Stripe
           end
         end
 
-        class TransferData < Stripe::StripeObject
+        class TransferData < ::Stripe::StripeObject
           # The amount transferred to the destination account. This transfer will occur
           # automatically after the payment succeeds. If no amount is specified, by default
           # the entire payment amount is transferred to the destination account. The amount

data/lib/stripe/resources/v2/tax/automatic_rule.rb

@@ -0,0 +1,39 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module V2
+    module Tax
+      # An AutomaticRule holds automatic Tax configuration for a BillableItem.
+      class AutomaticRule < APIResource
+        OBJECT_NAME = "v2.tax.automatic_rule"
+        def self.object_name
+          "v2.tax.automatic_rule"
+        end
+
+        # The ID of the BillableItem.
+        attr_reader :billable_item
+        # The time at which the AutomaticRule object was created.
+        attr_reader :created
+        # The ID of the AutomaticRule object.
+        attr_reader :id
+        # String representing the object's type. Objects of the same type share the same value of the object field.
+        attr_reader :object
+        # The status of the AutomaticRule object.
+        attr_reader :status
+        # A TaxCode object that will be used for automatic tax calculations.
+        attr_reader :tax_code
+        # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
+        attr_reader :livemode
+
+        def self.inner_class_types
+          @inner_class_types = {}
+        end
+
+        def self.field_remappings
+          @field_remappings = {}
+        end
+      end
+    end
+  end
+end