stripe 15.6.0.pre.beta.1 → 16.0.0

data/lib/stripe/params/setup_intent_verify_microdeposits_params.rb

@@ -0,0 +1,19 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  class SetupIntentVerifyMicrodepositsParams < Stripe::RequestParams
+    # Two positive integers, in *cents*, equal to the values of the microdeposits sent to the bank account.
+    attr_accessor :amounts
+    # A six-character code starting with SM present in the microdeposit sent to the bank account.
+    attr_accessor :descriptor_code
+    # Specifies which fields in the response should be expanded.
+    attr_accessor :expand
+
+    def initialize(amounts: nil, descriptor_code: nil, expand: nil)
+      @amounts = amounts
+      @descriptor_code = descriptor_code
+      @expand = expand
+    end
+  end
+end

data/lib/stripe/params/shipping_rate_create_params.rb

@@ -0,0 +1,103 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  class ShippingRateCreateParams < Stripe::RequestParams
+    class DeliveryEstimate < Stripe::RequestParams
+      class Maximum < Stripe::RequestParams
+        # A unit of time.
+        attr_accessor :unit
+        # Must be greater than 0.
+        attr_accessor :value
+
+        def initialize(unit: nil, value: nil)
+          @unit = unit
+          @value = value
+        end
+      end
+
+      class Minimum < Stripe::RequestParams
+        # A unit of time.
+        attr_accessor :unit
+        # Must be greater than 0.
+        attr_accessor :value
+
+        def initialize(unit: nil, value: nil)
+          @unit = unit
+          @value = value
+        end
+      end
+      # The upper bound of the estimated range. If empty, represents no upper bound i.e., infinite.
+      attr_accessor :maximum
+      # The lower bound of the estimated range. If empty, represents no lower bound.
+      attr_accessor :minimum
+
+      def initialize(maximum: nil, minimum: nil)
+        @maximum = maximum
+        @minimum = minimum
+      end
+    end
+
+    class FixedAmount < Stripe::RequestParams
+      class CurrencyOptions < Stripe::RequestParams
+        # A non-negative integer in cents representing how much to charge.
+        attr_accessor :amount
+        # Specifies whether the rate is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`.
+        attr_accessor :tax_behavior
+
+        def initialize(amount: nil, tax_behavior: nil)
+          @amount = amount
+          @tax_behavior = tax_behavior
+        end
+      end
+      # A non-negative integer in cents representing how much to charge.
+      attr_accessor :amount
+      # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
+      attr_accessor :currency
+      # Shipping rates defined in each available currency option. Each key must be a three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html) and a [supported currency](https://stripe.com/docs/currencies).
+      attr_accessor :currency_options
+
+      def initialize(amount: nil, currency: nil, currency_options: nil)
+        @amount = amount
+        @currency = currency
+        @currency_options = currency_options
+      end
+    end
+    # The estimated range for how long shipping will take, meant to be displayable to the customer. This will appear on CheckoutSessions.
+    attr_accessor :delivery_estimate
+    # The name of the shipping rate, meant to be displayable to the customer. This will appear on CheckoutSessions.
+    attr_accessor :display_name
+    # Specifies which fields in the response should be expanded.
+    attr_accessor :expand
+    # Describes a fixed amount to charge for shipping. Must be present if type is `fixed_amount`.
+    attr_accessor :fixed_amount
+    # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
+    attr_accessor :metadata
+    # Specifies whether the rate is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`.
+    attr_accessor :tax_behavior
+    # A [tax code](https://stripe.com/docs/tax/tax-categories) ID. The Shipping tax code is `txcd_92010001`.
+    attr_accessor :tax_code
+    # The type of calculation to use on the shipping rate.
+    attr_accessor :type
+
+    def initialize(
+      delivery_estimate: nil,
+      display_name: nil,
+      expand: nil,
+      fixed_amount: nil,
+      metadata: nil,
+      tax_behavior: nil,
+      tax_code: nil,
+      type: nil
+    )
+      @delivery_estimate = delivery_estimate
+      @display_name = display_name
+      @expand = expand
+      @fixed_amount = fixed_amount
+      @metadata = metadata
+      @tax_behavior = tax_behavior
+      @tax_code = tax_code
+      @type = type
+    end
+  end
+end

data/lib/stripe/params/shipping_rate_list_params.rb

@@ -0,0 +1,56 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  class ShippingRateListParams < Stripe::RequestParams
+    class Created < Stripe::RequestParams
+      # Minimum value to filter by (exclusive)
+      attr_accessor :gt
+      # Minimum value to filter by (inclusive)
+      attr_accessor :gte
+      # Maximum value to filter by (exclusive)
+      attr_accessor :lt
+      # Maximum value to filter by (inclusive)
+      attr_accessor :lte
+
+      def initialize(gt: nil, gte: nil, lt: nil, lte: nil)
+        @gt = gt
+        @gte = gte
+        @lt = lt
+        @lte = lte
+      end
+    end
+    # Only return shipping rates that are active or inactive.
+    attr_accessor :active
+    # A filter on the list, based on the object `created` field. The value can be a string with an integer Unix timestamp, or it can be a dictionary with a number of different query options.
+    attr_accessor :created
+    # Only return shipping rates for the given currency.
+    attr_accessor :currency
+    # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
+    attr_accessor :ending_before
+    # Specifies which fields in the response should be expanded.
+    attr_accessor :expand
+    # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
+    attr_accessor :limit
+    # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
+    attr_accessor :starting_after
+
+    def initialize(
+      active: nil,
+      created: nil,
+      currency: nil,
+      ending_before: nil,
+      expand: nil,
+      limit: nil,
+      starting_after: nil
+    )
+      @active = active
+      @created = created
+      @currency = currency
+      @ending_before = ending_before
+      @expand = expand
+      @limit = limit
+      @starting_after = starting_after
+    end
+  end
+end

data/lib/stripe/params/shipping_rate_retrieve_params.rb

@@ -0,0 +1,13 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  class ShippingRateRetrieveParams < Stripe::RequestParams
+    # Specifies which fields in the response should be expanded.
+    attr_accessor :expand
+
+    def initialize(expand: nil)
+      @expand = expand
+    end
+  end
+end

data/lib/stripe/params/shipping_rate_update_params.rb

@@ -0,0 +1,44 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  class ShippingRateUpdateParams < Stripe::RequestParams
+    class FixedAmount < Stripe::RequestParams
+      class CurrencyOptions < Stripe::RequestParams
+        # A non-negative integer in cents representing how much to charge.
+        attr_accessor :amount
+        # Specifies whether the rate is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`.
+        attr_accessor :tax_behavior
+
+        def initialize(amount: nil, tax_behavior: nil)
+          @amount = amount
+          @tax_behavior = tax_behavior
+        end
+      end
+      # Shipping rates defined in each available currency option. Each key must be a three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html) and a [supported currency](https://stripe.com/docs/currencies).
+      attr_accessor :currency_options
+
+      def initialize(currency_options: nil)
+        @currency_options = currency_options
+      end
+    end
+    # Whether the shipping rate can be used for new purchases. Defaults to `true`.
+    attr_accessor :active
+    # Specifies which fields in the response should be expanded.
+    attr_accessor :expand
+    # Describes a fixed amount to charge for shipping. Must be present if type is `fixed_amount`.
+    attr_accessor :fixed_amount
+    # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
+    attr_accessor :metadata
+    # Specifies whether the rate is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`.
+    attr_accessor :tax_behavior
+
+    def initialize(active: nil, expand: nil, fixed_amount: nil, metadata: nil, tax_behavior: nil)
+      @active = active
+      @expand = expand
+      @fixed_amount = fixed_amount
+      @metadata = metadata
+      @tax_behavior = tax_behavior
+    end
+  end
+end

data/lib/stripe/params/sigma/scheduled_query_run_list_params.rb

@@ -0,0 +1,24 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module Sigma
+    class ScheduledQueryRunListParams < Stripe::RequestParams
+      # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
+      attr_accessor :ending_before
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+      # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
+      attr_accessor :limit
+      # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
+      attr_accessor :starting_after
+
+      def initialize(ending_before: nil, expand: nil, limit: nil, starting_after: nil)
+        @ending_before = ending_before
+        @expand = expand
+        @limit = limit
+        @starting_after = starting_after
+      end
+    end
+  end
+end

data/lib/stripe/params/sigma/scheduled_query_run_retrieve_params.rb

@@ -0,0 +1,15 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module Sigma
+    class ScheduledQueryRunRetrieveParams < Stripe::RequestParams
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+
+      def initialize(expand: nil)
+        @expand = expand
+      end
+    end
+  end
+end

data/lib/stripe/params/source_create_params.rb

@@ -0,0 +1,317 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  class SourceCreateParams < Stripe::RequestParams
+    class Mandate < Stripe::RequestParams
+      class Acceptance < Stripe::RequestParams
+        class Offline < Stripe::RequestParams
+          # An email to contact you with if a copy of the mandate is requested, required if `type` is `offline`.
+          attr_accessor :contact_email
+
+          def initialize(contact_email: nil)
+            @contact_email = contact_email
+          end
+        end
+
+        class Online < Stripe::RequestParams
+          # The Unix timestamp (in seconds) when the mandate was accepted or refused by the customer.
+          attr_accessor :date
+          # The IP address from which the mandate was accepted or refused by the customer.
+          attr_accessor :ip
+          # The user agent of the browser from which the mandate was accepted or refused by the customer.
+          attr_accessor :user_agent
+
+          def initialize(date: nil, ip: nil, user_agent: nil)
+            @date = date
+            @ip = ip
+            @user_agent = user_agent
+          end
+        end
+        # The Unix timestamp (in seconds) when the mandate was accepted or refused by the customer.
+        attr_accessor :date
+        # The IP address from which the mandate was accepted or refused by the customer.
+        attr_accessor :ip
+        # The parameters required to store a mandate accepted offline. Should only be set if `mandate[type]` is `offline`
+        attr_accessor :offline
+        # The parameters required to store a mandate accepted online. Should only be set if `mandate[type]` is `online`
+        attr_accessor :online
+        # The status of the mandate acceptance. Either `accepted` (the mandate was accepted) or `refused` (the mandate was refused).
+        attr_accessor :status
+        # The type of acceptance information included with the mandate. Either `online` or `offline`
+        attr_accessor :type
+        # The user agent of the browser from which the mandate was accepted or refused by the customer.
+        attr_accessor :user_agent
+
+        def initialize(
+          date: nil,
+          ip: nil,
+          offline: nil,
+          online: nil,
+          status: nil,
+          type: nil,
+          user_agent: nil
+        )
+          @date = date
+          @ip = ip
+          @offline = offline
+          @online = online
+          @status = status
+          @type = type
+          @user_agent = user_agent
+        end
+      end
+      # The parameters required to notify Stripe of a mandate acceptance or refusal by the customer.
+      attr_accessor :acceptance
+      # The amount specified by the mandate. (Leave null for a mandate covering all amounts)
+      attr_accessor :amount
+      # The currency specified by the mandate. (Must match `currency` of the source)
+      attr_accessor :currency
+      # The interval of debits permitted by the mandate. Either `one_time` (just permitting a single debit), `scheduled` (with debits on an agreed schedule or for clearly-defined events), or `variable`(for debits with any frequency)
+      attr_accessor :interval
+      # The method Stripe should use to notify the customer of upcoming debit instructions and/or mandate confirmation as required by the underlying debit network. Either `email` (an email is sent directly to the customer), `manual` (a `source.mandate_notification` event is sent to your webhooks endpoint and you should handle the notification) or `none` (the underlying debit network does not require any notification).
+      attr_accessor :notification_method
+
+      def initialize(
+        acceptance: nil,
+        amount: nil,
+        currency: nil,
+        interval: nil,
+        notification_method: nil
+      )
+        @acceptance = acceptance
+        @amount = amount
+        @currency = currency
+        @interval = interval
+        @notification_method = notification_method
+      end
+    end
+
+    class Owner < Stripe::RequestParams
+      class Address < Stripe::RequestParams
+        # City, district, suburb, town, or village.
+        attr_accessor :city
+        # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
+        attr_accessor :country
+        # Address line 1, such as the street, PO Box, or company name.
+        attr_accessor :line1
+        # Address line 2, such as the apartment, suite, unit, or building.
+        attr_accessor :line2
+        # ZIP or postal code.
+        attr_accessor :postal_code
+        # State, county, province, or region.
+        attr_accessor :state
+
+        def initialize(
+          city: nil,
+          country: nil,
+          line1: nil,
+          line2: nil,
+          postal_code: nil,
+          state: nil
+        )
+          @city = city
+          @country = country
+          @line1 = line1
+          @line2 = line2
+          @postal_code = postal_code
+          @state = state
+        end
+      end
+      # Owner's address.
+      attr_accessor :address
+      # Owner's email address.
+      attr_accessor :email
+      # Owner's full name.
+      attr_accessor :name
+      # Owner's phone number.
+      attr_accessor :phone
+
+      def initialize(address: nil, email: nil, name: nil, phone: nil)
+        @address = address
+        @email = email
+        @name = name
+        @phone = phone
+      end
+    end
+
+    class Receiver < Stripe::RequestParams
+      # The method Stripe should use to request information needed to process a refund or mispayment. Either `email` (an email is sent directly to the customer) or `manual` (a `source.refund_attributes_required` event is sent to your webhooks endpoint). Refer to each payment method's documentation to learn which refund attributes may be required.
+      attr_accessor :refund_attributes_method
+
+      def initialize(refund_attributes_method: nil)
+        @refund_attributes_method = refund_attributes_method
+      end
+    end
+
+    class Redirect < Stripe::RequestParams
+      # The URL you provide to redirect the customer back to you after they authenticated their payment. It can use your application URI scheme in the context of a mobile application.
+      attr_accessor :return_url
+
+      def initialize(return_url: nil)
+        @return_url = return_url
+      end
+    end
+
+    class SourceOrder < Stripe::RequestParams
+      class Item < Stripe::RequestParams
+        # Attribute for param field amount
+        attr_accessor :amount
+        # Attribute for param field currency
+        attr_accessor :currency
+        # Attribute for param field description
+        attr_accessor :description
+        # The ID of the SKU being ordered.
+        attr_accessor :parent
+        # The quantity of this order item. When type is `sku`, this is the number of instances of the SKU to be ordered.
+        attr_accessor :quantity
+        # Attribute for param field type
+        attr_accessor :type
+
+        def initialize(
+          amount: nil,
+          currency: nil,
+          description: nil,
+          parent: nil,
+          quantity: nil,
+          type: nil
+        )
+          @amount = amount
+          @currency = currency
+          @description = description
+          @parent = parent
+          @quantity = quantity
+          @type = type
+        end
+      end
+
+      class Shipping < Stripe::RequestParams
+        class Address < Stripe::RequestParams
+          # City, district, suburb, town, or village.
+          attr_accessor :city
+          # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
+          attr_accessor :country
+          # Address line 1, such as the street, PO Box, or company name.
+          attr_accessor :line1
+          # Address line 2, such as the apartment, suite, unit, or building.
+          attr_accessor :line2
+          # ZIP or postal code.
+          attr_accessor :postal_code
+          # State, county, province, or region.
+          attr_accessor :state
+
+          def initialize(
+            city: nil,
+            country: nil,
+            line1: nil,
+            line2: nil,
+            postal_code: nil,
+            state: nil
+          )
+            @city = city
+            @country = country
+            @line1 = line1
+            @line2 = line2
+            @postal_code = postal_code
+            @state = state
+          end
+        end
+        # Shipping address.
+        attr_accessor :address
+        # The delivery service that shipped a physical product, such as Fedex, UPS, USPS, etc.
+        attr_accessor :carrier
+        # Recipient name.
+        attr_accessor :name
+        # Recipient phone (including extension).
+        attr_accessor :phone
+        # The tracking number for a physical product, obtained from the delivery service. If multiple tracking numbers were generated for this purchase, please separate them with commas.
+        attr_accessor :tracking_number
+
+        def initialize(address: nil, carrier: nil, name: nil, phone: nil, tracking_number: nil)
+          @address = address
+          @carrier = carrier
+          @name = name
+          @phone = phone
+          @tracking_number = tracking_number
+        end
+      end
+      # List of items constituting the order.
+      attr_accessor :items
+      # Shipping address for the order. Required if any of the SKUs are for products that have `shippable` set to true.
+      attr_accessor :shipping
+
+      def initialize(items: nil, shipping: nil)
+        @items = items
+        @shipping = shipping
+      end
+    end
+    # Amount associated with the source. This is the amount for which the source will be chargeable once ready. Required for `single_use` sources. Not supported for `receiver` type sources, where charge amount may not be specified until funds land.
+    attr_accessor :amount
+    # Three-letter [ISO code for the currency](https://stripe.com/docs/currencies) associated with the source. This is the currency for which the source will be chargeable once ready.
+    attr_accessor :currency
+    # The `Customer` to whom the original source is attached to. Must be set when the original source is not a `Source` (e.g., `Card`).
+    attr_accessor :customer
+    # Specifies which fields in the response should be expanded.
+    attr_accessor :expand
+    # The authentication `flow` of the source to create. `flow` is one of `redirect`, `receiver`, `code_verification`, `none`. It is generally inferred unless a type supports multiple flows.
+    attr_accessor :flow
+    # Information about a mandate possibility attached to a source object (generally for bank debits) as well as its acceptance status.
+    attr_accessor :mandate
+    # Attribute for param field metadata
+    attr_accessor :metadata
+    # The source to share.
+    attr_accessor :original_source
+    # Information about the owner of the payment instrument that may be used or required by particular source types.
+    attr_accessor :owner
+    # Optional parameters for the receiver flow. Can be set only if the source is a receiver (`flow` is `receiver`).
+    attr_accessor :receiver
+    # Parameters required for the redirect flow. Required if the source is authenticated by a redirect (`flow` is `redirect`).
+    attr_accessor :redirect
+    # Information about the items and shipping associated with the source. Required for transactional credit (for example Klarna) sources before you can charge it.
+    attr_accessor :source_order
+    # An arbitrary string to be displayed on your customer's statement. As an example, if your website is `RunClub` and the item you're charging for is a race ticket, you may want to specify a `statement_descriptor` of `RunClub 5K race ticket.` While many payment types will display this information, some may not display it at all.
+    attr_accessor :statement_descriptor
+    # An optional token used to create the source. When passed, token properties will override source parameters.
+    attr_accessor :token
+    # The `type` of the source to create. Required unless `customer` and `original_source` are specified (see the [Cloning card Sources](https://stripe.com/docs/sources/connect#cloning-card-sources) guide)
+    attr_accessor :type
+    # Attribute for param field usage
+    attr_accessor :usage
+
+    def initialize(
+      amount: nil,
+      currency: nil,
+      customer: nil,
+      expand: nil,
+      flow: nil,
+      mandate: nil,
+      metadata: nil,
+      original_source: nil,
+      owner: nil,
+      receiver: nil,
+      redirect: nil,
+      source_order: nil,
+      statement_descriptor: nil,
+      token: nil,
+      type: nil,
+      usage: nil
+    )
+      @amount = amount
+      @currency = currency
+      @customer = customer
+      @expand = expand
+      @flow = flow
+      @mandate = mandate
+      @metadata = metadata
+      @original_source = original_source
+      @owner = owner
+      @receiver = receiver
+      @redirect = redirect
+      @source_order = source_order
+      @statement_descriptor = statement_descriptor
+      @token = token
+      @type = type
+      @usage = usage
+    end
+  end
+end

data/lib/stripe/params/source_detach_params.rb

@@ -0,0 +1,13 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  class SourceDetachParams < Stripe::RequestParams
+    # Specifies which fields in the response should be expanded.
+    attr_accessor :expand
+
+    def initialize(expand: nil)
+      @expand = expand
+    end
+  end
+end

data/lib/stripe/params/source_retrieve_params.rb

@@ -0,0 +1,16 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  class SourceRetrieveParams < Stripe::RequestParams
+    # The client secret of the source. Required if a publishable key is used to retrieve the source.
+    attr_accessor :client_secret
+    # Specifies which fields in the response should be expanded.
+    attr_accessor :expand
+
+    def initialize(client_secret: nil, expand: nil)
+      @client_secret = client_secret
+      @expand = expand
+    end
+  end
+end

data/lib/stripe/params/source_transaction_list_params.rb

@@ -0,0 +1,22 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  class SourceTransactionListParams < Stripe::RequestParams
+    # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
+    attr_accessor :ending_before
+    # Specifies which fields in the response should be expanded.
+    attr_accessor :expand
+    # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
+    attr_accessor :limit
+    # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
+    attr_accessor :starting_after
+
+    def initialize(ending_before: nil, expand: nil, limit: nil, starting_after: nil)
+      @ending_before = ending_before
+      @expand = expand
+      @limit = limit
+      @starting_after = starting_after
+    end
+  end
+end