stripe 15.5.0 → 16.0.0

data/lib/stripe/resources/quote.rb

@@ -20,6 +20,14 @@ module Stripe
         attr_reader :account
         # Type of the account referenced.
         attr_reader :type
+
+        def self.inner_class_types
+          @inner_class_types = {}
+        end
+
+        def self.field_remappings
+          @field_remappings = {}
+        end
       end
       # Automatically calculate taxes
       attr_reader :enabled
@@ -29,6 +37,14 @@ module Stripe
       attr_reader :provider
       # The status of the most recent automated tax calculation for this quote.
       attr_reader :status
+
+      def self.inner_class_types
+        @inner_class_types = { liability: Liability }
+      end
+
+      def self.field_remappings
+        @field_remappings = {}
+      end
     end
 
     class Computed < Stripe::StripeObject
@@ -43,6 +59,14 @@ module Stripe
               #
               # Related guide: [Applying discounts to subscriptions](https://stripe.com/docs/billing/subscriptions/discounts)
               attr_reader :discount
+
+              def self.inner_class_types
+                @inner_class_types = {}
+              end
+
+              def self.field_remappings
+                @field_remappings = {}
+              end
             end
 
             class Tax < Stripe::StripeObject
@@ -56,11 +80,27 @@ module Stripe
               attr_reader :taxability_reason
               # The amount on which tax is calculated, in cents (or local equivalent).
               attr_reader :taxable_amount
+
+              def self.inner_class_types
+                @inner_class_types = {}
+              end
+
+              def self.field_remappings
+                @field_remappings = {}
+              end
             end
             # The aggregated discounts.
             attr_reader :discounts
             # The aggregated tax amounts by rate.
             attr_reader :taxes
+
+            def self.inner_class_types
+              @inner_class_types = { discounts: Discount, taxes: Tax }
+            end
+
+            def self.field_remappings
+              @field_remappings = {}
+            end
           end
           # This is the sum of all the discounts.
           attr_reader :amount_discount
@@ -70,6 +110,14 @@ module Stripe
           attr_reader :amount_tax
           # Attribute for field breakdown
           attr_reader :breakdown
+
+          def self.inner_class_types
+            @inner_class_types = { breakdown: Breakdown }
+          end
+
+          def self.field_remappings
+            @field_remappings = {}
+          end
         end
         # Total before any discounts or taxes are applied.
         attr_reader :amount_subtotal
@@ -81,6 +129,14 @@ module Stripe
         attr_reader :interval_count
         # Attribute for field total_details
         attr_reader :total_details
+
+        def self.inner_class_types
+          @inner_class_types = { total_details: TotalDetails }
+        end
+
+        def self.field_remappings
+          @field_remappings = {}
+        end
       end
 
       class Upfront < Stripe::StripeObject
@@ -94,6 +150,14 @@ module Stripe
               #
               # Related guide: [Applying discounts to subscriptions](https://stripe.com/docs/billing/subscriptions/discounts)
               attr_reader :discount
+
+              def self.inner_class_types
+                @inner_class_types = {}
+              end
+
+              def self.field_remappings
+                @field_remappings = {}
+              end
             end
 
             class Tax < Stripe::StripeObject
@@ -107,11 +171,27 @@ module Stripe
               attr_reader :taxability_reason
               # The amount on which tax is calculated, in cents (or local equivalent).
               attr_reader :taxable_amount
+
+              def self.inner_class_types
+                @inner_class_types = {}
+              end
+
+              def self.field_remappings
+                @field_remappings = {}
+              end
             end
             # The aggregated discounts.
             attr_reader :discounts
             # The aggregated tax amounts by rate.
             attr_reader :taxes
+
+            def self.inner_class_types
+              @inner_class_types = { discounts: Discount, taxes: Tax }
+            end
+
+            def self.field_remappings
+              @field_remappings = {}
+            end
           end
           # This is the sum of all the discounts.
           attr_reader :amount_discount
@@ -121,6 +201,14 @@ module Stripe
           attr_reader :amount_tax
           # Attribute for field breakdown
           attr_reader :breakdown
+
+          def self.inner_class_types
+            @inner_class_types = { breakdown: Breakdown }
+          end
+
+          def self.field_remappings
+            @field_remappings = {}
+          end
         end
         # Total before any discounts or taxes are applied.
         attr_reader :amount_subtotal
@@ -130,11 +218,27 @@ module Stripe
         attr_reader :line_items
         # Attribute for field total_details
         attr_reader :total_details
+
+        def self.inner_class_types
+          @inner_class_types = { total_details: TotalDetails }
+        end
+
+        def self.field_remappings
+          @field_remappings = {}
+        end
       end
       # The definitive totals and line items the customer will be charged on a recurring basis. Takes into account the line items with recurring prices and discounts with `duration=forever` coupons only. Defaults to `null` if no inputted line items with recurring prices.
       attr_reader :recurring
       # Attribute for field upfront
       attr_reader :upfront
+
+      def self.inner_class_types
+        @inner_class_types = { recurring: Recurring, upfront: Upfront }
+      end
+
+      def self.field_remappings
+        @field_remappings = {}
+      end
     end
 
     class FromQuote < Stripe::StripeObject
@@ -142,6 +246,14 @@ module Stripe
       attr_reader :is_revision
       # The quote that was cloned.
       attr_reader :quote
+
+      def self.inner_class_types
+        @inner_class_types = {}
+      end
+
+      def self.field_remappings
+        @field_remappings = {}
+      end
     end
 
     class InvoiceSettings < Stripe::StripeObject
@@ -150,11 +262,27 @@ module Stripe
         attr_reader :account
         # Type of the account referenced.
         attr_reader :type
+
+        def self.inner_class_types
+          @inner_class_types = {}
+        end
+
+        def self.field_remappings
+          @field_remappings = {}
+        end
       end
       # Number of days within which a customer must pay invoices generated by this quote. This value will be `null` for quotes where `collection_method=charge_automatically`.
       attr_reader :days_until_due
       # Attribute for field issuer
       attr_reader :issuer
+
+      def self.inner_class_types
+        @inner_class_types = { issuer: Issuer }
+      end
+
+      def self.field_remappings
+        @field_remappings = {}
+      end
     end
 
     class StatusTransitions < Stripe::StripeObject
@@ -164,12 +292,42 @@ module Stripe
       attr_reader :canceled_at
       # The time that the quote was finalized. Measured in seconds since Unix epoch.
       attr_reader :finalized_at
+
+      def self.inner_class_types
+        @inner_class_types = {}
+      end
+
+      def self.field_remappings
+        @field_remappings = {}
+      end
     end
 
     class SubscriptionData < Stripe::StripeObject
       class BillingMode < Stripe::StripeObject
+        class Flexible < Stripe::StripeObject
+          # Controls how invoices and invoice items display proration amounts and discount amounts.
+          attr_reader :proration_discounts
+
+          def self.inner_class_types
+            @inner_class_types = {}
+          end
+
+          def self.field_remappings
+            @field_remappings = {}
+          end
+        end
+        # Attribute for field flexible
+        attr_reader :flexible
         # Controls how prorations and invoices for subscriptions are calculated and orchestrated.
         attr_reader :type
+
+        def self.inner_class_types
+          @inner_class_types = { flexible: Flexible }
+        end
+
+        def self.field_remappings
+          @field_remappings = {}
+        end
       end
       # The billing mode of the quote.
       attr_reader :billing_mode
@@ -181,6 +339,14 @@ module Stripe
       attr_reader :metadata
       # Integer representing the number of trial period days before the customer is charged for the first time.
       attr_reader :trial_period_days
+
+      def self.inner_class_types
+        @inner_class_types = { billing_mode: BillingMode }
+      end
+
+      def self.field_remappings
+        @field_remappings = {}
+      end
     end
 
     class TotalDetails < Stripe::StripeObject
@@ -193,6 +359,14 @@ module Stripe
           #
           # Related guide: [Applying discounts to subscriptions](https://stripe.com/docs/billing/subscriptions/discounts)
           attr_reader :discount
+
+          def self.inner_class_types
+            @inner_class_types = {}
+          end
+
+          def self.field_remappings
+            @field_remappings = {}
+          end
         end
 
         class Tax < Stripe::StripeObject
@@ -206,11 +380,27 @@ module Stripe
           attr_reader :taxability_reason
           # The amount on which tax is calculated, in cents (or local equivalent).
           attr_reader :taxable_amount
+
+          def self.inner_class_types
+            @inner_class_types = {}
+          end
+
+          def self.field_remappings
+            @field_remappings = {}
+          end
         end
         # The aggregated discounts.
         attr_reader :discounts
         # The aggregated tax amounts by rate.
         attr_reader :taxes
+
+        def self.inner_class_types
+          @inner_class_types = { discounts: Discount, taxes: Tax }
+        end
+
+        def self.field_remappings
+          @field_remappings = {}
+        end
       end
       # This is the sum of all the discounts.
       attr_reader :amount_discount
@@ -220,6 +410,14 @@ module Stripe
       attr_reader :amount_tax
       # Attribute for field breakdown
       attr_reader :breakdown
+
+      def self.inner_class_types
+        @inner_class_types = { breakdown: Breakdown }
+      end
+
+      def self.field_remappings
+        @field_remappings = {}
+      end
     end
 
     class TransferData < Stripe::StripeObject
@@ -229,660 +427,13 @@ module Stripe
       attr_reader :amount_percent
       # The account where funds from the payment will be transferred to upon payment success.
       attr_reader :destination
-    end
 
-    class ListParams < Stripe::RequestParams
-      # The ID of the customer whose quotes will be retrieved.
-      attr_accessor :customer
-      # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
-      attr_accessor :ending_before
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-      # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
-      attr_accessor :limit
-      # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
-      attr_accessor :starting_after
-      # The status of the quote.
-      attr_accessor :status
-      # Provides a list of quotes that are associated with the specified test clock. The response will not include quotes with test clocks if this and the customer parameter is not set.
-      attr_accessor :test_clock
-
-      def initialize(
-        customer: nil,
-        ending_before: nil,
-        expand: nil,
-        limit: nil,
-        starting_after: nil,
-        status: nil,
-        test_clock: nil
-      )
-        @customer = customer
-        @ending_before = ending_before
-        @expand = expand
-        @limit = limit
-        @starting_after = starting_after
-        @status = status
-        @test_clock = test_clock
+      def self.inner_class_types
+        @inner_class_types = {}
       end
-    end
 
-    class CreateParams < Stripe::RequestParams
-      class AutomaticTax < Stripe::RequestParams
-        class Liability < Stripe::RequestParams
-          # The connected account being referenced when `type` is `account`.
-          attr_accessor :account
-          # Type of the account referenced in the request.
-          attr_accessor :type
-
-          def initialize(account: nil, type: nil)
-            @account = account
-            @type = type
-          end
-        end
-        # Controls whether Stripe will automatically compute tax on the resulting invoices or subscriptions as well as the quote itself.
-        attr_accessor :enabled
-        # The account that's liable for tax. If set, the business address and tax registrations required to perform the tax calculation are loaded from this account. The tax transaction is returned in the report of the connected account.
-        attr_accessor :liability
-
-        def initialize(enabled: nil, liability: nil)
-          @enabled = enabled
-          @liability = liability
-        end
-      end
-
-      class Discount < Stripe::RequestParams
-        # ID of the coupon to create a new discount for.
-        attr_accessor :coupon
-        # ID of an existing discount on the object (or one of its ancestors) to reuse.
-        attr_accessor :discount
-        # ID of the promotion code to create a new discount for.
-        attr_accessor :promotion_code
-
-        def initialize(coupon: nil, discount: nil, promotion_code: nil)
-          @coupon = coupon
-          @discount = discount
-          @promotion_code = promotion_code
-        end
-      end
-
-      class FromQuote < Stripe::RequestParams
-        # Whether this quote is a revision of the previous quote.
-        attr_accessor :is_revision
-        # The `id` of the quote that will be cloned.
-        attr_accessor :quote
-
-        def initialize(is_revision: nil, quote: nil)
-          @is_revision = is_revision
-          @quote = quote
-        end
-      end
-
-      class InvoiceSettings < Stripe::RequestParams
-        class Issuer < Stripe::RequestParams
-          # The connected account being referenced when `type` is `account`.
-          attr_accessor :account
-          # Type of the account referenced in the request.
-          attr_accessor :type
-
-          def initialize(account: nil, type: nil)
-            @account = account
-            @type = type
-          end
-        end
-        # Number of days within which a customer must pay the invoice generated by this quote. This value will be `null` for quotes where `collection_method=charge_automatically`.
-        attr_accessor :days_until_due
-        # The connected account that issues the invoice. The invoice is presented with the branding and support information of the specified account.
-        attr_accessor :issuer
-
-        def initialize(days_until_due: nil, issuer: nil)
-          @days_until_due = days_until_due
-          @issuer = issuer
-        end
-      end
-
-      class LineItem < Stripe::RequestParams
-        class Discount < Stripe::RequestParams
-          # ID of the coupon to create a new discount for.
-          attr_accessor :coupon
-          # ID of an existing discount on the object (or one of its ancestors) to reuse.
-          attr_accessor :discount
-          # ID of the promotion code to create a new discount for.
-          attr_accessor :promotion_code
-
-          def initialize(coupon: nil, discount: nil, promotion_code: nil)
-            @coupon = coupon
-            @discount = discount
-            @promotion_code = promotion_code
-          end
-        end
-
-        class PriceData < Stripe::RequestParams
-          class Recurring < Stripe::RequestParams
-            # Specifies billing frequency. Either `day`, `week`, `month` or `year`.
-            attr_accessor :interval
-            # The number of intervals between subscription billings. For example, `interval=month` and `interval_count=3` bills every 3 months. Maximum of three years interval allowed (3 years, 36 months, or 156 weeks).
-            attr_accessor :interval_count
-
-            def initialize(interval: nil, interval_count: nil)
-              @interval = interval
-              @interval_count = interval_count
-            end
-          end
-          # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
-          attr_accessor :currency
-          # The ID of the [Product](https://docs.stripe.com/api/products) that this [Price](https://docs.stripe.com/api/prices) will belong to.
-          attr_accessor :product
-          # The recurring components of a price such as `interval` and `interval_count`.
-          attr_accessor :recurring
-          # Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed.
-          attr_accessor :tax_behavior
-          # A positive integer in cents (or local equivalent) (or 0 for a free price) representing how much to charge.
-          attr_accessor :unit_amount
-          # Same as `unit_amount`, but accepts a decimal value in cents (or local equivalent) with at most 12 decimal places. Only one of `unit_amount` and `unit_amount_decimal` can be set.
-          attr_accessor :unit_amount_decimal
-
-          def initialize(
-            currency: nil,
-            product: nil,
-            recurring: nil,
-            tax_behavior: nil,
-            unit_amount: nil,
-            unit_amount_decimal: nil
-          )
-            @currency = currency
-            @product = product
-            @recurring = recurring
-            @tax_behavior = tax_behavior
-            @unit_amount = unit_amount
-            @unit_amount_decimal = unit_amount_decimal
-          end
-        end
-        # The discounts applied to this line item.
-        attr_accessor :discounts
-        # The ID of the price object. One of `price` or `price_data` is required.
-        attr_accessor :price
-        # Data used to generate a new [Price](https://stripe.com/docs/api/prices) object inline. One of `price` or `price_data` is required.
-        attr_accessor :price_data
-        # The quantity of the line item.
-        attr_accessor :quantity
-        # The tax rates which apply to the line item. When set, the `default_tax_rates` on the quote do not apply to this line item.
-        attr_accessor :tax_rates
-
-        def initialize(discounts: nil, price: nil, price_data: nil, quantity: nil, tax_rates: nil)
-          @discounts = discounts
-          @price = price
-          @price_data = price_data
-          @quantity = quantity
-          @tax_rates = tax_rates
-        end
-      end
-
-      class SubscriptionData < Stripe::RequestParams
-        class BillingMode < Stripe::RequestParams
-          # Controls the calculation and orchestration of prorations and invoices for subscriptions.
-          attr_accessor :type
-
-          def initialize(type: nil)
-            @type = type
-          end
-        end
-        # Controls how prorations and invoices for subscriptions are calculated and orchestrated.
-        attr_accessor :billing_mode
-        # The subscription's description, meant to be displayable to the customer. Use this field to optionally store an explanation of the subscription for rendering in Stripe surfaces and certain local payment methods UIs.
-        attr_accessor :description
-        # When creating a new subscription, the date of which the subscription schedule will start after the quote is accepted. The `effective_date` is ignored if it is in the past when the quote is accepted.
-        attr_accessor :effective_date
-        # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that will set metadata on the subscription or subscription schedule when the quote is accepted. If a recurring price is included in `line_items`, this field will be passed to the resulting subscription's `metadata` field. If `subscription_data.effective_date` is used, this field will be passed to the resulting subscription schedule's `phases.metadata` field. Unlike object-level metadata, this field is declarative. Updates will clear prior values.
-        attr_accessor :metadata
-        # Integer representing the number of trial period days before the customer is charged for the first time.
-        attr_accessor :trial_period_days
-
-        def initialize(
-          billing_mode: nil,
-          description: nil,
-          effective_date: nil,
-          metadata: nil,
-          trial_period_days: nil
-        )
-          @billing_mode = billing_mode
-          @description = description
-          @effective_date = effective_date
-          @metadata = metadata
-          @trial_period_days = trial_period_days
-        end
-      end
-
-      class TransferData < Stripe::RequestParams
-        # The amount that will be transferred automatically when the invoice is paid. If no amount is set, the full amount is transferred. There cannot be any line items with recurring prices when using this field.
-        attr_accessor :amount
-        # A non-negative decimal between 0 and 100, with at most two decimal places. This represents the percentage of the subscription invoice total that will be transferred to the destination account. By default, the entire amount is transferred to the destination. There must be at least 1 line item with a recurring price to use this field.
-        attr_accessor :amount_percent
-        # ID of an existing, connected Stripe account.
-        attr_accessor :destination
-
-        def initialize(amount: nil, amount_percent: nil, destination: nil)
-          @amount = amount
-          @amount_percent = amount_percent
-          @destination = destination
-        end
-      end
-      # The amount of the application fee (if any) that will be requested to be applied to the payment and transferred to the application owner's Stripe account. There cannot be any line items with recurring prices when using this field.
-      attr_accessor :application_fee_amount
-      # A non-negative decimal between 0 and 100, with at most two decimal places. This represents the percentage of the subscription invoice total that will be transferred to the application owner's Stripe account. There must be at least 1 line item with a recurring price to use this field.
-      attr_accessor :application_fee_percent
-      # Settings for automatic tax lookup for this quote and resulting invoices and subscriptions.
-      attr_accessor :automatic_tax
-      # Either `charge_automatically`, or `send_invoice`. When charging automatically, Stripe will attempt to pay invoices at the end of the subscription cycle or at invoice finalization using the default payment method attached to the subscription or customer. When sending an invoice, Stripe will email your customer an invoice with payment instructions and mark the subscription as `active`. Defaults to `charge_automatically`.
-      attr_accessor :collection_method
-      # The customer for which this quote belongs to. A customer is required before finalizing the quote. Once specified, it cannot be changed.
-      attr_accessor :customer
-      # The tax rates that will apply to any line item that does not have `tax_rates` set.
-      attr_accessor :default_tax_rates
-      # A description that will be displayed on the quote PDF. If no value is passed, the default description configured in your [quote template settings](https://dashboard.stripe.com/settings/billing/quote) will be used.
-      attr_accessor :description
-      # The discounts applied to the quote.
-      attr_accessor :discounts
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-      # A future timestamp on which the quote will be canceled if in `open` or `draft` status. Measured in seconds since the Unix epoch. If no value is passed, the default expiration date configured in your [quote template settings](https://dashboard.stripe.com/settings/billing/quote) will be used.
-      attr_accessor :expires_at
-      # A footer that will be displayed on the quote PDF. If no value is passed, the default footer configured in your [quote template settings](https://dashboard.stripe.com/settings/billing/quote) will be used.
-      attr_accessor :footer
-      # Clone an existing quote. The new quote will be created in `status=draft`. When using this parameter, you cannot specify any other parameters except for `expires_at`.
-      attr_accessor :from_quote
-      # A header that will be displayed on the quote PDF. If no value is passed, the default header configured in your [quote template settings](https://dashboard.stripe.com/settings/billing/quote) will be used.
-      attr_accessor :header
-      # All invoices will be billed using the specified settings.
-      attr_accessor :invoice_settings
-      # A list of line items the customer is being quoted for. Each line item includes information about the product, the quantity, and the resulting cost.
-      attr_accessor :line_items
-      # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
-      attr_accessor :metadata
-      # The account on behalf of which to charge.
-      attr_accessor :on_behalf_of
-      # When creating a subscription or subscription schedule, the specified configuration data will be used. There must be at least one line item with a recurring price for a subscription or subscription schedule to be created. A subscription schedule is created if `subscription_data[effective_date]` is present and in the future, otherwise a subscription is created.
-      attr_accessor :subscription_data
-      # ID of the test clock to attach to the quote.
-      attr_accessor :test_clock
-      # The data with which to automatically create a Transfer for each of the invoices.
-      attr_accessor :transfer_data
-
-      def initialize(
-        application_fee_amount: nil,
-        application_fee_percent: nil,
-        automatic_tax: nil,
-        collection_method: nil,
-        customer: nil,
-        default_tax_rates: nil,
-        description: nil,
-        discounts: nil,
-        expand: nil,
-        expires_at: nil,
-        footer: nil,
-        from_quote: nil,
-        header: nil,
-        invoice_settings: nil,
-        line_items: nil,
-        metadata: nil,
-        on_behalf_of: nil,
-        subscription_data: nil,
-        test_clock: nil,
-        transfer_data: nil
-      )
-        @application_fee_amount = application_fee_amount
-        @application_fee_percent = application_fee_percent
-        @automatic_tax = automatic_tax
-        @collection_method = collection_method
-        @customer = customer
-        @default_tax_rates = default_tax_rates
-        @description = description
-        @discounts = discounts
-        @expand = expand
-        @expires_at = expires_at
-        @footer = footer
-        @from_quote = from_quote
-        @header = header
-        @invoice_settings = invoice_settings
-        @line_items = line_items
-        @metadata = metadata
-        @on_behalf_of = on_behalf_of
-        @subscription_data = subscription_data
-        @test_clock = test_clock
-        @transfer_data = transfer_data
-      end
-    end
-
-    class UpdateParams < Stripe::RequestParams
-      class AutomaticTax < Stripe::RequestParams
-        class Liability < Stripe::RequestParams
-          # The connected account being referenced when `type` is `account`.
-          attr_accessor :account
-          # Type of the account referenced in the request.
-          attr_accessor :type
-
-          def initialize(account: nil, type: nil)
-            @account = account
-            @type = type
-          end
-        end
-        # Controls whether Stripe will automatically compute tax on the resulting invoices or subscriptions as well as the quote itself.
-        attr_accessor :enabled
-        # The account that's liable for tax. If set, the business address and tax registrations required to perform the tax calculation are loaded from this account. The tax transaction is returned in the report of the connected account.
-        attr_accessor :liability
-
-        def initialize(enabled: nil, liability: nil)
-          @enabled = enabled
-          @liability = liability
-        end
-      end
-
-      class Discount < Stripe::RequestParams
-        # ID of the coupon to create a new discount for.
-        attr_accessor :coupon
-        # ID of an existing discount on the object (or one of its ancestors) to reuse.
-        attr_accessor :discount
-        # ID of the promotion code to create a new discount for.
-        attr_accessor :promotion_code
-
-        def initialize(coupon: nil, discount: nil, promotion_code: nil)
-          @coupon = coupon
-          @discount = discount
-          @promotion_code = promotion_code
-        end
-      end
-
-      class InvoiceSettings < Stripe::RequestParams
-        class Issuer < Stripe::RequestParams
-          # The connected account being referenced when `type` is `account`.
-          attr_accessor :account
-          # Type of the account referenced in the request.
-          attr_accessor :type
-
-          def initialize(account: nil, type: nil)
-            @account = account
-            @type = type
-          end
-        end
-        # Number of days within which a customer must pay the invoice generated by this quote. This value will be `null` for quotes where `collection_method=charge_automatically`.
-        attr_accessor :days_until_due
-        # The connected account that issues the invoice. The invoice is presented with the branding and support information of the specified account.
-        attr_accessor :issuer
-
-        def initialize(days_until_due: nil, issuer: nil)
-          @days_until_due = days_until_due
-          @issuer = issuer
-        end
-      end
-
-      class LineItem < Stripe::RequestParams
-        class Discount < Stripe::RequestParams
-          # ID of the coupon to create a new discount for.
-          attr_accessor :coupon
-          # ID of an existing discount on the object (or one of its ancestors) to reuse.
-          attr_accessor :discount
-          # ID of the promotion code to create a new discount for.
-          attr_accessor :promotion_code
-
-          def initialize(coupon: nil, discount: nil, promotion_code: nil)
-            @coupon = coupon
-            @discount = discount
-            @promotion_code = promotion_code
-          end
-        end
-
-        class PriceData < Stripe::RequestParams
-          class Recurring < Stripe::RequestParams
-            # Specifies billing frequency. Either `day`, `week`, `month` or `year`.
-            attr_accessor :interval
-            # The number of intervals between subscription billings. For example, `interval=month` and `interval_count=3` bills every 3 months. Maximum of three years interval allowed (3 years, 36 months, or 156 weeks).
-            attr_accessor :interval_count
-
-            def initialize(interval: nil, interval_count: nil)
-              @interval = interval
-              @interval_count = interval_count
-            end
-          end
-          # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
-          attr_accessor :currency
-          # The ID of the [Product](https://docs.stripe.com/api/products) that this [Price](https://docs.stripe.com/api/prices) will belong to.
-          attr_accessor :product
-          # The recurring components of a price such as `interval` and `interval_count`.
-          attr_accessor :recurring
-          # Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed.
-          attr_accessor :tax_behavior
-          # A positive integer in cents (or local equivalent) (or 0 for a free price) representing how much to charge.
-          attr_accessor :unit_amount
-          # Same as `unit_amount`, but accepts a decimal value in cents (or local equivalent) with at most 12 decimal places. Only one of `unit_amount` and `unit_amount_decimal` can be set.
-          attr_accessor :unit_amount_decimal
-
-          def initialize(
-            currency: nil,
-            product: nil,
-            recurring: nil,
-            tax_behavior: nil,
-            unit_amount: nil,
-            unit_amount_decimal: nil
-          )
-            @currency = currency
-            @product = product
-            @recurring = recurring
-            @tax_behavior = tax_behavior
-            @unit_amount = unit_amount
-            @unit_amount_decimal = unit_amount_decimal
-          end
-        end
-        # The discounts applied to this line item.
-        attr_accessor :discounts
-        # The ID of an existing line item on the quote.
-        attr_accessor :id
-        # The ID of the price object. One of `price` or `price_data` is required.
-        attr_accessor :price
-        # Data used to generate a new [Price](https://stripe.com/docs/api/prices) object inline. One of `price` or `price_data` is required.
-        attr_accessor :price_data
-        # The quantity of the line item.
-        attr_accessor :quantity
-        # The tax rates which apply to the line item. When set, the `default_tax_rates` on the quote do not apply to this line item.
-        attr_accessor :tax_rates
-
-        def initialize(
-          discounts: nil,
-          id: nil,
-          price: nil,
-          price_data: nil,
-          quantity: nil,
-          tax_rates: nil
-        )
-          @discounts = discounts
-          @id = id
-          @price = price
-          @price_data = price_data
-          @quantity = quantity
-          @tax_rates = tax_rates
-        end
-      end
-
-      class SubscriptionData < Stripe::RequestParams
-        # The subscription's description, meant to be displayable to the customer. Use this field to optionally store an explanation of the subscription for rendering in Stripe surfaces and certain local payment methods UIs.
-        attr_accessor :description
-        # When creating a new subscription, the date of which the subscription schedule will start after the quote is accepted. The `effective_date` is ignored if it is in the past when the quote is accepted.
-        attr_accessor :effective_date
-        # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that will set metadata on the subscription or subscription schedule when the quote is accepted. If a recurring price is included in `line_items`, this field will be passed to the resulting subscription's `metadata` field. If `subscription_data.effective_date` is used, this field will be passed to the resulting subscription schedule's `phases.metadata` field. Unlike object-level metadata, this field is declarative. Updates will clear prior values.
-        attr_accessor :metadata
-        # Integer representing the number of trial period days before the customer is charged for the first time.
-        attr_accessor :trial_period_days
-
-        def initialize(description: nil, effective_date: nil, metadata: nil, trial_period_days: nil)
-          @description = description
-          @effective_date = effective_date
-          @metadata = metadata
-          @trial_period_days = trial_period_days
-        end
-      end
-
-      class TransferData < Stripe::RequestParams
-        # The amount that will be transferred automatically when the invoice is paid. If no amount is set, the full amount is transferred. There cannot be any line items with recurring prices when using this field.
-        attr_accessor :amount
-        # A non-negative decimal between 0 and 100, with at most two decimal places. This represents the percentage of the subscription invoice total that will be transferred to the destination account. By default, the entire amount is transferred to the destination. There must be at least 1 line item with a recurring price to use this field.
-        attr_accessor :amount_percent
-        # ID of an existing, connected Stripe account.
-        attr_accessor :destination
-
-        def initialize(amount: nil, amount_percent: nil, destination: nil)
-          @amount = amount
-          @amount_percent = amount_percent
-          @destination = destination
-        end
-      end
-      # The amount of the application fee (if any) that will be requested to be applied to the payment and transferred to the application owner's Stripe account. There cannot be any line items with recurring prices when using this field.
-      attr_accessor :application_fee_amount
-      # A non-negative decimal between 0 and 100, with at most two decimal places. This represents the percentage of the subscription invoice total that will be transferred to the application owner's Stripe account. There must be at least 1 line item with a recurring price to use this field.
-      attr_accessor :application_fee_percent
-      # Settings for automatic tax lookup for this quote and resulting invoices and subscriptions.
-      attr_accessor :automatic_tax
-      # Either `charge_automatically`, or `send_invoice`. When charging automatically, Stripe will attempt to pay invoices at the end of the subscription cycle or at invoice finalization using the default payment method attached to the subscription or customer. When sending an invoice, Stripe will email your customer an invoice with payment instructions and mark the subscription as `active`. Defaults to `charge_automatically`.
-      attr_accessor :collection_method
-      # The customer for which this quote belongs to. A customer is required before finalizing the quote. Once specified, it cannot be changed.
-      attr_accessor :customer
-      # The tax rates that will apply to any line item that does not have `tax_rates` set.
-      attr_accessor :default_tax_rates
-      # A description that will be displayed on the quote PDF.
-      attr_accessor :description
-      # The discounts applied to the quote.
-      attr_accessor :discounts
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-      # A future timestamp on which the quote will be canceled if in `open` or `draft` status. Measured in seconds since the Unix epoch.
-      attr_accessor :expires_at
-      # A footer that will be displayed on the quote PDF.
-      attr_accessor :footer
-      # A header that will be displayed on the quote PDF.
-      attr_accessor :header
-      # All invoices will be billed using the specified settings.
-      attr_accessor :invoice_settings
-      # A list of line items the customer is being quoted for. Each line item includes information about the product, the quantity, and the resulting cost.
-      attr_accessor :line_items
-      # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
-      attr_accessor :metadata
-      # The account on behalf of which to charge.
-      attr_accessor :on_behalf_of
-      # When creating a subscription or subscription schedule, the specified configuration data will be used. There must be at least one line item with a recurring price for a subscription or subscription schedule to be created. A subscription schedule is created if `subscription_data[effective_date]` is present and in the future, otherwise a subscription is created.
-      attr_accessor :subscription_data
-      # The data with which to automatically create a Transfer for each of the invoices.
-      attr_accessor :transfer_data
-
-      def initialize(
-        application_fee_amount: nil,
-        application_fee_percent: nil,
-        automatic_tax: nil,
-        collection_method: nil,
-        customer: nil,
-        default_tax_rates: nil,
-        description: nil,
-        discounts: nil,
-        expand: nil,
-        expires_at: nil,
-        footer: nil,
-        header: nil,
-        invoice_settings: nil,
-        line_items: nil,
-        metadata: nil,
-        on_behalf_of: nil,
-        subscription_data: nil,
-        transfer_data: nil
-      )
-        @application_fee_amount = application_fee_amount
-        @application_fee_percent = application_fee_percent
-        @automatic_tax = automatic_tax
-        @collection_method = collection_method
-        @customer = customer
-        @default_tax_rates = default_tax_rates
-        @description = description
-        @discounts = discounts
-        @expand = expand
-        @expires_at = expires_at
-        @footer = footer
-        @header = header
-        @invoice_settings = invoice_settings
-        @line_items = line_items
-        @metadata = metadata
-        @on_behalf_of = on_behalf_of
-        @subscription_data = subscription_data
-        @transfer_data = transfer_data
-      end
-    end
-
-    class ListComputedUpfrontLineItemsParams < Stripe::RequestParams
-      # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
-      attr_accessor :ending_before
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-      # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
-      attr_accessor :limit
-      # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
-      attr_accessor :starting_after
-
-      def initialize(ending_before: nil, expand: nil, limit: nil, starting_after: nil)
-        @ending_before = ending_before
-        @expand = expand
-        @limit = limit
-        @starting_after = starting_after
-      end
-    end
-
-    class ListLineItemsParams < Stripe::RequestParams
-      # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
-      attr_accessor :ending_before
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-      # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
-      attr_accessor :limit
-      # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
-      attr_accessor :starting_after
-
-      def initialize(ending_before: nil, expand: nil, limit: nil, starting_after: nil)
-        @ending_before = ending_before
-        @expand = expand
-        @limit = limit
-        @starting_after = starting_after
-      end
-    end
-
-    class AcceptParams < Stripe::RequestParams
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-
-      def initialize(expand: nil)
-        @expand = expand
-      end
-    end
-
-    class CancelParams < Stripe::RequestParams
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-
-      def initialize(expand: nil)
-        @expand = expand
-      end
-    end
-
-    class FinalizeQuoteParams < Stripe::RequestParams
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-      # A future timestamp on which the quote will be canceled if in `open` or `draft` status. Measured in seconds since the Unix epoch.
-      attr_accessor :expires_at
-
-      def initialize(expand: nil, expires_at: nil)
-        @expand = expand
-        @expires_at = expires_at
-      end
-    end
-
-    class PdfParams < Stripe::RequestParams
-      # Specifies which fields in the response should be expanded.
-      attr_accessor :expand
-
-      def initialize(expand: nil)
-        @expand = expand
+      def self.field_remappings
+        @field_remappings = {}
       end
     end
     # Total before any discounts or taxes are applied.
@@ -1101,5 +652,22 @@ module Stripe
         opts: opts
       )
     end
+
+    def self.inner_class_types
+      @inner_class_types = {
+        automatic_tax: AutomaticTax,
+        computed: Computed,
+        from_quote: FromQuote,
+        invoice_settings: InvoiceSettings,
+        status_transitions: StatusTransitions,
+        subscription_data: SubscriptionData,
+        total_details: TotalDetails,
+        transfer_data: TransferData,
+      }
+    end
+
+    def self.field_remappings
+      @field_remappings = {}
+    end
   end
 end