stripe 15.5.0.pre.beta.2 → 15.5.0

data/lib/stripe/resources/charge.rb

@@ -96,11 +96,11 @@ module Stripe
       attr_reader :advice_code
       # For charges declined by the network, a 2 digit code which indicates the advice returned by the network on how to proceed with an error.
       attr_reader :network_advice_code
-      # For charges declined by the network, a brand specific 2, 3, or 4 digit code which indicates the reason the authorization failed.
+      # For charges declined by the network, an alphanumeric code which indicates the reason the charge failed.
       attr_reader :network_decline_code
       # Possible values are `approved_by_network`, `declined_by_network`, `not_sent_to_network`, and `reversed_after_approval`. The value `reversed_after_approval` indicates the payment was [blocked by Stripe](https://stripe.com/docs/declines#blocked-payments) after bank authorization, and may temporarily appear as "pending" on a cardholder's statement.
       attr_reader :network_status
-      # An enumerated value providing a more detailed explanation of the outcome's `type`. Charges blocked by Radar's default block rule have the value `highest_risk_level`. Charges placed in review by Radar's default review rule have the value `elevated_risk_level`. Charges authorized, blocked, or placed in review by custom rules have the value `rule`. See [understanding declines](https://stripe.com/docs/declines) for more details.
+      # An enumerated value providing a more detailed explanation of the outcome's `type`. Charges blocked by Radar's default block rule have the value `highest_risk_level`. Charges placed in review by Radar's default review rule have the value `elevated_risk_level`. Charges blocked because the payment is unlikely to be authorized have the value `low_probability_of_authorization`. Charges authorized, blocked, or placed in review by custom rules have the value `rule`. See [understanding declines](https://stripe.com/docs/declines) for more details.
       attr_reader :reason
       # Stripe Radar's evaluation of the riskiness of the payment. Possible values for evaluated payments are `normal`, `elevated`, `highest`. For non-card payments, and card-based payments predating the public assignment of risk levels, this field will have the value `not_assessed`. In the event of an error in the evaluation, this field will have the value `unknown`. This field is only available with Radar.
       attr_reader :risk_level
@@ -181,15 +181,22 @@ module Stripe
         attr_reader :transaction_id
       end
 
-      class Alma < Stripe::StripeObject; end
+      class Alma < Stripe::StripeObject
+        class Installments < Stripe::StripeObject
+          # The number of installments.
+          attr_reader :count
+        end
+        # Attribute for field installments
+        attr_reader :installments
+        # The Alma transaction ID associated with this payment.
+        attr_reader :transaction_id
+      end
 
       class AmazonPay < Stripe::StripeObject
         class Funding < Stripe::StripeObject
           class Card < Stripe::StripeObject
             # Card brand. Can be `amex`, `cartes_bancaires`, `diners`, `discover`, `eftpos_au`, `jcb`, `link`, `mastercard`, `unionpay`, `visa` or `unknown`.
             attr_reader :brand
-            # The [product code](https://stripe.com/docs/card-product-codes) that identifies the specific program or product associated with a card. (For internal use only and not typically available in standard API requests.)
-            attr_reader :brand_product
             # Two-letter ISO code representing the country of the card. You could use this attribute to get a sense of the international breakdown of cards you've collected.
             attr_reader :country
             # Two-digit number representing the card's expiration month.
@@ -208,6 +215,8 @@ module Stripe
         end
         # Attribute for field funding
         attr_reader :funding
+        # The Amazon Pay transaction ID associated with this payment.
+        attr_reader :transaction_id
       end
 
       class AuBecsDebit < Stripe::StripeObject
@@ -253,7 +262,10 @@ module Stripe
         attr_reader :verified_name
       end
 
-      class Billie < Stripe::StripeObject; end
+      class Billie < Stripe::StripeObject
+        # The Billie transaction ID associated with this payment.
+        attr_reader :transaction_id
+      end
 
       class Blik < Stripe::StripeObject
         # A unique and immutable identifier assigned by BLIK to every buyer.
@@ -275,11 +287,6 @@ module Stripe
           attr_reader :cvc_check
         end
 
-        class DecrementalAuthorization < Stripe::StripeObject
-          # Indicates whether or not the decremental authorization feature is supported.
-          attr_reader :status
-        end
-
         class ExtendedAuthorization < Stripe::StripeObject
           # Indicates whether or not the capture window is extended beyond the standard authorization.
           attr_reader :status
@@ -321,11 +328,6 @@ module Stripe
           attr_reader :status
         end
 
-        class PartialAuthorization < Stripe::StripeObject
-          # Indicates whether the transaction requested for partial authorization feature and the authorization outcome.
-          attr_reader :status
-        end
-
         class ThreeDSecure < Stripe::StripeObject
           # For authenticated transactions: how the customer was authenticated by
           # the issuing bank.
@@ -458,8 +460,6 @@ module Stripe
         end
         # The authorized amount.
         attr_reader :amount_authorized
-        # The latest amount intended to be authorized by this charge.
-        attr_reader :amount_requested
         # Authorization code on the charge.
         attr_reader :authorization_code
         # Card brand. Can be `amex`, `cartes_bancaires`, `diners`, `discover`, `eftpos_au`, `jcb`, `link`, `mastercard`, `unionpay`, `visa` or `unknown`.
@@ -470,8 +470,6 @@ module Stripe
         attr_reader :checks
         # Two-letter ISO code representing the country of the card. You could use this attribute to get a sense of the international breakdown of cards you've collected.
         attr_reader :country
-        # Attribute for field decremental_authorization
-        attr_reader :decremental_authorization
         # A high-level description of the type of cards issued in this range. (For internal use only and not typically available in standard API requests.)
         attr_reader :description
         # Two-digit number representing the card's expiration month.
@@ -512,8 +510,6 @@ module Stripe
         attr_reader :network_transaction_id
         # Attribute for field overcapture
         attr_reader :overcapture
-        # Attribute for field partial_authorization
-        attr_reader :partial_authorization
         # Status of a card based on the card issuer.
         attr_reader :regulated_status
         # Populated if this transaction used 3D Secure authentication.
@@ -662,26 +658,11 @@ module Stripe
         attr_reader :verified_name
       end
 
-      class Gopay < Stripe::StripeObject; end
-
       class Grabpay < Stripe::StripeObject
         # Unique transaction id generated by GrabPay
         attr_reader :transaction_id
       end
 
-      class IdBankTransfer < Stripe::StripeObject
-        # Account number of the bank account to transfer funds to.
-        attr_reader :account_number
-        # Bank where the account is located.
-        attr_reader :bank
-        # Local bank code of the bank.
-        attr_reader :bank_code
-        # Name of the bank associated with the bank account.
-        attr_reader :bank_name
-        # Merchant name and billing details name, for the customer to check for the correct merchant when performing the bank transfer.
-        attr_reader :display_name
-      end
-
       class Ideal < Stripe::StripeObject
         # The customer's bank. Can be one of `abn_amro`, `asn_bank`, `bunq`, `buut`, `handelsbanken`, `ing`, `knab`, `moneyou`, `n26`, `nn`, `rabobank`, `regiobank`, `revolut`, `sns_bank`, `triodos_bank`, `van_lanschot`, or `yoursafe`.
         attr_reader :bank
@@ -762,6 +743,8 @@ module Stripe
       class KakaoPay < Stripe::StripeObject
         # A unique identifier for the buyer as determined by the local payment processor.
         attr_reader :buyer_id
+        # The Kakao Pay transaction ID associated with this payment.
+        attr_reader :transaction_id
       end
 
       class Klarna < Stripe::StripeObject
@@ -799,6 +782,8 @@ module Stripe
         attr_reader :buyer_id
         # The last four digits of the card. This may not be present for American Express cards.
         attr_reader :last4
+        # The Korean Card transaction ID associated with this payment.
+        attr_reader :transaction_id
       end
 
       class Link < Stripe::StripeObject
@@ -807,8 +792,6 @@ module Stripe
         attr_reader :country
       end
 
-      class MbWay < Stripe::StripeObject; end
-
       class Mobilepay < Stripe::StripeObject
         class Card < Stripe::StripeObject
           # Brand of the card used in the transaction
@@ -836,6 +819,8 @@ module Stripe
       class NaverPay < Stripe::StripeObject
         # A unique identifier for the buyer as determined by the local payment processor.
         attr_reader :buyer_id
+        # The Naver Pay transaction ID associated with this payment.
+        attr_reader :transaction_id
       end
 
       class NzBankAccount < Stripe::StripeObject
@@ -874,9 +859,15 @@ module Stripe
       class Payco < Stripe::StripeObject
         # A unique identifier for the buyer as determined by the local payment processor.
         attr_reader :buyer_id
+        # The Payco transaction ID associated with this payment.
+        attr_reader :transaction_id
       end
 
       class Paynow < Stripe::StripeObject
+        # ID of the [location](https://stripe.com/docs/api/terminal/locations) that this transaction's reader is assigned to.
+        attr_reader :location
+        # ID of the [reader](https://stripe.com/docs/api/terminal/readers) this transaction was made on.
+        attr_reader :reader
         # Reference number associated with this PayNow payment
         attr_reader :reference
       end
@@ -888,36 +879,6 @@ module Stripe
           # Indicates whether the transaction is eligible for PayPal's seller protection.
           attr_reader :status
         end
-
-        class Shipping < Stripe::StripeObject
-          # City, district, suburb, town, or village.
-          attr_reader :city
-          # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
-          attr_reader :country
-          # Address line 1 (e.g., street, PO Box, or company name).
-          attr_reader :line1
-          # Address line 2 (e.g., apartment, suite, unit, or building).
-          attr_reader :line2
-          # ZIP or postal code.
-          attr_reader :postal_code
-          # State, county, province, or region.
-          attr_reader :state
-        end
-
-        class VerifiedAddress < Stripe::StripeObject
-          # City, district, suburb, town, or village.
-          attr_reader :city
-          # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
-          attr_reader :country
-          # Address line 1 (e.g., street, PO Box, or company name).
-          attr_reader :line1
-          # Address line 2 (e.g., apartment, suite, unit, or building).
-          attr_reader :line2
-          # ZIP or postal code.
-          attr_reader :postal_code
-          # State, county, province, or region.
-          attr_reader :state
-        end
         # Two-letter ISO code representing the buyer's country. Values are provided by PayPal directly (if supported) at the time of authorization or settlement. They cannot be set or mutated.
         attr_reader :country
         # Owner's email. Values are provided by PayPal directly
@@ -930,33 +891,8 @@ module Stripe
         attr_reader :payer_name
         # The level of protection offered as defined by PayPal Seller Protection for Merchants, for this transaction.
         attr_reader :seller_protection
-        # The shipping address for the customer, as supplied by the merchant at the point of payment
-        # execution. This shipping address will not be updated if the merchant updates the shipping
-        # address on the PaymentIntent after the PaymentIntent was successfully confirmed.
-        attr_reader :shipping
         # A unique ID generated by PayPal for this transaction.
         attr_reader :transaction_id
-        # The shipping address for the customer, as supplied by the merchant at the point of payment
-        # execution. This shipping address will not be updated if the merchant updates the shipping
-        # address on the PaymentIntent after the PaymentIntent was successfully confirmed.
-        attr_reader :verified_address
-        # Owner's verified email. Values are verified or provided by PayPal directly
-        # (if supported) at the time of authorization or settlement. They cannot be set or mutated.
-        attr_reader :verified_email
-        # Owner's verified full name. Values are verified or provided by PayPal directly
-        # (if supported) at the time of authorization or settlement. They cannot be set or mutated.
-        attr_reader :verified_name
-      end
-
-      class Payto < Stripe::StripeObject
-        # Bank-State-Branch number of the bank account.
-        attr_reader :bsb_number
-        # Last four digits of the bank account number.
-        attr_reader :last4
-        # ID of the mandate used to make this payment.
-        attr_reader :mandate
-        # The PayID alias for the bank account.
-        attr_reader :pay_id
       end
 
       class Pix < Stripe::StripeObject
@@ -969,16 +905,11 @@ module Stripe
         attr_reader :reference
       end
 
-      class Qris < Stripe::StripeObject; end
-      class Rechnung < Stripe::StripeObject; end
-
       class RevolutPay < Stripe::StripeObject
         class Funding < Stripe::StripeObject
           class Card < Stripe::StripeObject
             # Card brand. Can be `amex`, `cartes_bancaires`, `diners`, `discover`, `eftpos_au`, `jcb`, `link`, `mastercard`, `unionpay`, `visa` or `unknown`.
             attr_reader :brand
-            # The [product code](https://stripe.com/docs/card-product-codes) that identifies the specific program or product associated with a card. (For internal use only and not typically available in standard API requests.)
-            attr_reader :brand_product
             # Two-letter ISO code representing the country of the card. You could use this attribute to get a sense of the international breakdown of cards you've collected.
             attr_reader :country
             # Two-digit number representing the card's expiration month.
@@ -997,14 +928,21 @@ module Stripe
         end
         # Attribute for field funding
         attr_reader :funding
+        # The Revolut Pay transaction ID associated with this payment.
+        attr_reader :transaction_id
       end
 
       class SamsungPay < Stripe::StripeObject
         # A unique identifier for the buyer as determined by the local payment processor.
         attr_reader :buyer_id
+        # The Samsung Pay transaction ID associated with this payment.
+        attr_reader :transaction_id
       end
 
-      class Satispay < Stripe::StripeObject; end
+      class Satispay < Stripe::StripeObject
+        # The Satispay transaction ID associated with this payment.
+        attr_reader :transaction_id
+      end
 
       class SepaCreditTransfer < Stripe::StripeObject
         # Name of the bank associated with the bank account.
@@ -1030,8 +968,6 @@ module Stripe
         attr_reader :mandate
       end
 
-      class Shopeepay < Stripe::StripeObject; end
-
       class Sofort < Stripe::StripeObject
         # Bank code of bank associated with the bank account.
         attr_reader :bank_code
@@ -1057,13 +993,6 @@ module Stripe
 
       class StripeAccount < Stripe::StripeObject; end
 
-      class StripeBalance < Stripe::StripeObject
-        # The connected account ID whose Stripe balance to use as the source of payment
-        attr_reader :account
-        # The [source_type](https://docs.stripe.com/api/balance/balance_object#balance_object-available-source_types) of the balance
-        attr_reader :source_type
-      end
-
       class Swish < Stripe::StripeObject
         # Uniquely identifies the payer's Swish account. You can use this attribute to check whether two Swish transactions were paid for by the same payer
         attr_reader :fingerprint
@@ -1152,12 +1081,8 @@ module Stripe
       attr_reader :fpx
       # Attribute for field giropay
       attr_reader :giropay
-      # Attribute for field gopay
-      attr_reader :gopay
       # Attribute for field grabpay
       attr_reader :grabpay
-      # Attribute for field id_bank_transfer
-      attr_reader :id_bank_transfer
       # Attribute for field ideal
       attr_reader :ideal
       # Attribute for field interac_present
@@ -1172,8 +1097,6 @@ module Stripe
       attr_reader :kr_card
       # Attribute for field link
       attr_reader :link
-      # Attribute for field mb_way
-      attr_reader :mb_way
       # Attribute for field mobilepay
       attr_reader :mobilepay
       # Attribute for field multibanco
@@ -1194,16 +1117,10 @@ module Stripe
       attr_reader :paynow
       # Attribute for field paypal
       attr_reader :paypal
-      # Attribute for field payto
-      attr_reader :payto
       # Attribute for field pix
       attr_reader :pix
       # Attribute for field promptpay
       attr_reader :promptpay
-      # Attribute for field qris
-      attr_reader :qris
-      # Attribute for field rechnung
-      attr_reader :rechnung
       # Attribute for field revolut_pay
       attr_reader :revolut_pay
       # Attribute for field samsung_pay
@@ -1214,14 +1131,10 @@ module Stripe
       attr_reader :sepa_credit_transfer
       # Attribute for field sepa_debit
       attr_reader :sepa_debit
-      # Attribute for field shopeepay
-      attr_reader :shopeepay
       # Attribute for field sofort
       attr_reader :sofort
       # Attribute for field stripe_account
       attr_reader :stripe_account
-      # Attribute for field stripe_balance
-      attr_reader :stripe_balance
       # Attribute for field swish
       attr_reader :swish
       # Attribute for field twint
@@ -1520,711 +1433,6 @@ module Stripe
         end
       end
 
-      class PaymentDetails < Stripe::RequestParams
-        class CarRental < Stripe::RequestParams
-          class Affiliate < Stripe::RequestParams
-            # The name of the affiliate that originated the purchase.
-            attr_accessor :name
-
-            def initialize(name: nil)
-              @name = name
-            end
-          end
-
-          class Delivery < Stripe::RequestParams
-            class Recipient < Stripe::RequestParams
-              # The email of the recipient the ticket is delivered to.
-              attr_accessor :email
-              # The name of the recipient the ticket is delivered to.
-              attr_accessor :name
-              # The phone number of the recipient the ticket is delivered to.
-              attr_accessor :phone
-
-              def initialize(email: nil, name: nil, phone: nil)
-                @email = email
-                @name = name
-                @phone = phone
-              end
-            end
-            # The delivery method for the payment
-            attr_accessor :mode
-            # Details of the recipient.
-            attr_accessor :recipient
-
-            def initialize(mode: nil, recipient: nil)
-              @mode = mode
-              @recipient = recipient
-            end
-          end
-
-          class Distance < Stripe::RequestParams
-            # Distance traveled.
-            attr_accessor :amount
-            # Unit of measurement for the distance traveled. One of `miles` or `kilometers`.
-            attr_accessor :unit
-
-            def initialize(amount: nil, unit: nil)
-              @amount = amount
-              @unit = unit
-            end
-          end
-
-          class Driver < Stripe::RequestParams
-            # Driver's identification number.
-            attr_accessor :driver_identification_number
-            # Driver's tax number.
-            attr_accessor :driver_tax_number
-            # Full name of the person or entity on the car reservation.
-            attr_accessor :name
-
-            def initialize(driver_identification_number: nil, driver_tax_number: nil, name: nil)
-              @driver_identification_number = driver_identification_number
-              @driver_tax_number = driver_tax_number
-              @name = name
-            end
-          end
-
-          class PickupAddress < Stripe::RequestParams
-            # City, district, suburb, town, or village.
-            attr_accessor :city
-            # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
-            attr_accessor :country
-            # Address line 1 (e.g., street, PO Box, or company name).
-            attr_accessor :line1
-            # Address line 2 (e.g., apartment, suite, unit, or building).
-            attr_accessor :line2
-            # ZIP or postal code.
-            attr_accessor :postal_code
-            # State, county, province, or region.
-            attr_accessor :state
-
-            def initialize(
-              city: nil,
-              country: nil,
-              line1: nil,
-              line2: nil,
-              postal_code: nil,
-              state: nil
-            )
-              @city = city
-              @country = country
-              @line1 = line1
-              @line2 = line2
-              @postal_code = postal_code
-              @state = state
-            end
-          end
-
-          class ReturnAddress < Stripe::RequestParams
-            # City, district, suburb, town, or village.
-            attr_accessor :city
-            # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
-            attr_accessor :country
-            # Address line 1 (e.g., street, PO Box, or company name).
-            attr_accessor :line1
-            # Address line 2 (e.g., apartment, suite, unit, or building).
-            attr_accessor :line2
-            # ZIP or postal code.
-            attr_accessor :postal_code
-            # State, county, province, or region.
-            attr_accessor :state
-
-            def initialize(
-              city: nil,
-              country: nil,
-              line1: nil,
-              line2: nil,
-              postal_code: nil,
-              state: nil
-            )
-              @city = city
-              @country = country
-              @line1 = line1
-              @line2 = line2
-              @postal_code = postal_code
-              @state = state
-            end
-          end
-          # Affiliate details for this purchase.
-          attr_accessor :affiliate
-          # The booking number associated with the car rental.
-          attr_accessor :booking_number
-          # Class code of the car.
-          attr_accessor :car_class_code
-          # Make of the car.
-          attr_accessor :car_make
-          # Model of the car.
-          attr_accessor :car_model
-          # The name of the rental car company.
-          attr_accessor :company
-          # The customer service phone number of the car rental company.
-          attr_accessor :customer_service_phone_number
-          # Number of days the car is being rented.
-          attr_accessor :days_rented
-          # Delivery details for this purchase.
-          attr_accessor :delivery
-          # The details of the distance traveled during the rental period.
-          attr_accessor :distance
-          # The details of the passengers in the travel reservation
-          attr_accessor :drivers
-          # List of additional charges being billed.
-          attr_accessor :extra_charges
-          # Indicates if the customer did not keep nor cancel their booking.
-          attr_accessor :no_show
-          # Car pick-up address.
-          attr_accessor :pickup_address
-          # Car pick-up time. Measured in seconds since the Unix epoch.
-          attr_accessor :pickup_at
-          # Name of the pickup location.
-          attr_accessor :pickup_location_name
-          # Rental rate.
-          attr_accessor :rate_amount
-          # The frequency at which the rate amount is applied. One of `day`, `week` or `month`
-          attr_accessor :rate_interval
-          # The name of the person or entity renting the car.
-          attr_accessor :renter_name
-          # Car return address.
-          attr_accessor :return_address
-          # Car return time. Measured in seconds since the Unix epoch.
-          attr_accessor :return_at
-          # Name of the return location.
-          attr_accessor :return_location_name
-          # Indicates whether the goods or services are tax-exempt or tax is not collected.
-          attr_accessor :tax_exempt
-          # The vehicle identification number.
-          attr_accessor :vehicle_identification_number
-
-          def initialize(
-            affiliate: nil,
-            booking_number: nil,
-            car_class_code: nil,
-            car_make: nil,
-            car_model: nil,
-            company: nil,
-            customer_service_phone_number: nil,
-            days_rented: nil,
-            delivery: nil,
-            distance: nil,
-            drivers: nil,
-            extra_charges: nil,
-            no_show: nil,
-            pickup_address: nil,
-            pickup_at: nil,
-            pickup_location_name: nil,
-            rate_amount: nil,
-            rate_interval: nil,
-            renter_name: nil,
-            return_address: nil,
-            return_at: nil,
-            return_location_name: nil,
-            tax_exempt: nil,
-            vehicle_identification_number: nil
-          )
-            @affiliate = affiliate
-            @booking_number = booking_number
-            @car_class_code = car_class_code
-            @car_make = car_make
-            @car_model = car_model
-            @company = company
-            @customer_service_phone_number = customer_service_phone_number
-            @days_rented = days_rented
-            @delivery = delivery
-            @distance = distance
-            @drivers = drivers
-            @extra_charges = extra_charges
-            @no_show = no_show
-            @pickup_address = pickup_address
-            @pickup_at = pickup_at
-            @pickup_location_name = pickup_location_name
-            @rate_amount = rate_amount
-            @rate_interval = rate_interval
-            @renter_name = renter_name
-            @return_address = return_address
-            @return_at = return_at
-            @return_location_name = return_location_name
-            @tax_exempt = tax_exempt
-            @vehicle_identification_number = vehicle_identification_number
-          end
-        end
-
-        class EventDetails < Stripe::RequestParams
-          class Address < Stripe::RequestParams
-            # City, district, suburb, town, or village.
-            attr_accessor :city
-            # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
-            attr_accessor :country
-            # Address line 1 (e.g., street, PO Box, or company name).
-            attr_accessor :line1
-            # Address line 2 (e.g., apartment, suite, unit, or building).
-            attr_accessor :line2
-            # ZIP or postal code.
-            attr_accessor :postal_code
-            # State, county, province, or region.
-            attr_accessor :state
-
-            def initialize(
-              city: nil,
-              country: nil,
-              line1: nil,
-              line2: nil,
-              postal_code: nil,
-              state: nil
-            )
-              @city = city
-              @country = country
-              @line1 = line1
-              @line2 = line2
-              @postal_code = postal_code
-              @state = state
-            end
-          end
-
-          class Affiliate < Stripe::RequestParams
-            # The name of the affiliate that originated the purchase.
-            attr_accessor :name
-
-            def initialize(name: nil)
-              @name = name
-            end
-          end
-
-          class Delivery < Stripe::RequestParams
-            class Recipient < Stripe::RequestParams
-              # The email of the recipient the ticket is delivered to.
-              attr_accessor :email
-              # The name of the recipient the ticket is delivered to.
-              attr_accessor :name
-              # The phone number of the recipient the ticket is delivered to.
-              attr_accessor :phone
-
-              def initialize(email: nil, name: nil, phone: nil)
-                @email = email
-                @name = name
-                @phone = phone
-              end
-            end
-            # The delivery method for the payment
-            attr_accessor :mode
-            # Details of the recipient.
-            attr_accessor :recipient
-
-            def initialize(mode: nil, recipient: nil)
-              @mode = mode
-              @recipient = recipient
-            end
-          end
-          # Indicates if the tickets are digitally checked when entering the venue.
-          attr_accessor :access_controlled_venue
-          # The event location's address.
-          attr_accessor :address
-          # Affiliate details for this purchase.
-          attr_accessor :affiliate
-          # The name of the company
-          attr_accessor :company
-          # Delivery details for this purchase.
-          attr_accessor :delivery
-          # Event end time. Measured in seconds since the Unix epoch.
-          attr_accessor :ends_at
-          # Type of the event entertainment (concert, sports event etc)
-          attr_accessor :genre
-          # The name of the event.
-          attr_accessor :name
-          # Event start time. Measured in seconds since the Unix epoch.
-          attr_accessor :starts_at
-
-          def initialize(
-            access_controlled_venue: nil,
-            address: nil,
-            affiliate: nil,
-            company: nil,
-            delivery: nil,
-            ends_at: nil,
-            genre: nil,
-            name: nil,
-            starts_at: nil
-          )
-            @access_controlled_venue = access_controlled_venue
-            @address = address
-            @affiliate = affiliate
-            @company = company
-            @delivery = delivery
-            @ends_at = ends_at
-            @genre = genre
-            @name = name
-            @starts_at = starts_at
-          end
-        end
-
-        class Flight < Stripe::RequestParams
-          class Affiliate < Stripe::RequestParams
-            # The name of the affiliate that originated the purchase.
-            attr_accessor :name
-
-            def initialize(name: nil)
-              @name = name
-            end
-          end
-
-          class Delivery < Stripe::RequestParams
-            class Recipient < Stripe::RequestParams
-              # The email of the recipient the ticket is delivered to.
-              attr_accessor :email
-              # The name of the recipient the ticket is delivered to.
-              attr_accessor :name
-              # The phone number of the recipient the ticket is delivered to.
-              attr_accessor :phone
-
-              def initialize(email: nil, name: nil, phone: nil)
-                @email = email
-                @name = name
-                @phone = phone
-              end
-            end
-            # The delivery method for the payment
-            attr_accessor :mode
-            # Details of the recipient.
-            attr_accessor :recipient
-
-            def initialize(mode: nil, recipient: nil)
-              @mode = mode
-              @recipient = recipient
-            end
-          end
-
-          class Passenger < Stripe::RequestParams
-            # Full name of the person or entity on the flight reservation.
-            attr_accessor :name
-
-            def initialize(name: nil)
-              @name = name
-            end
-          end
-
-          class Segment < Stripe::RequestParams
-            # The flight segment amount.
-            attr_accessor :amount
-            # The International Air Transport Association (IATA) airport code for the arrival airport.
-            attr_accessor :arrival_airport
-            # The arrival time for the flight segment. Measured in seconds since the Unix epoch.
-            attr_accessor :arrives_at
-            # The International Air Transport Association (IATA) carrier code of the carrier operating the flight segment.
-            attr_accessor :carrier
-            # The departure time for the flight segment. Measured in seconds since the Unix epoch.
-            attr_accessor :departs_at
-            # The International Air Transport Association (IATA) airport code for the departure airport.
-            attr_accessor :departure_airport
-            # The flight number associated with the segment
-            attr_accessor :flight_number
-            # The fare class for the segment.
-            attr_accessor :service_class
-
-            def initialize(
-              amount: nil,
-              arrival_airport: nil,
-              arrives_at: nil,
-              carrier: nil,
-              departs_at: nil,
-              departure_airport: nil,
-              flight_number: nil,
-              service_class: nil
-            )
-              @amount = amount
-              @arrival_airport = arrival_airport
-              @arrives_at = arrives_at
-              @carrier = carrier
-              @departs_at = departs_at
-              @departure_airport = departure_airport
-              @flight_number = flight_number
-              @service_class = service_class
-            end
-          end
-          # Affiliate details for this purchase.
-          attr_accessor :affiliate
-          # The agency number (i.e. International Air Transport Association (IATA) agency number) of the travel agency that made the booking.
-          attr_accessor :agency_number
-          # The International Air Transport Association (IATA) carrier code of the carrier that issued the ticket.
-          attr_accessor :carrier
-          # Delivery details for this purchase.
-          attr_accessor :delivery
-          # The name of the person or entity on the reservation.
-          attr_accessor :passenger_name
-          # The details of the passengers in the travel reservation.
-          attr_accessor :passengers
-          # The individual flight segments associated with the trip.
-          attr_accessor :segments
-          # The ticket number associated with the travel reservation.
-          attr_accessor :ticket_number
-
-          def initialize(
-            affiliate: nil,
-            agency_number: nil,
-            carrier: nil,
-            delivery: nil,
-            passenger_name: nil,
-            passengers: nil,
-            segments: nil,
-            ticket_number: nil
-          )
-            @affiliate = affiliate
-            @agency_number = agency_number
-            @carrier = carrier
-            @delivery = delivery
-            @passenger_name = passenger_name
-            @passengers = passengers
-            @segments = segments
-            @ticket_number = ticket_number
-          end
-        end
-
-        class Lodging < Stripe::RequestParams
-          class Address < Stripe::RequestParams
-            # City, district, suburb, town, or village.
-            attr_accessor :city
-            # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
-            attr_accessor :country
-            # Address line 1 (e.g., street, PO Box, or company name).
-            attr_accessor :line1
-            # Address line 2 (e.g., apartment, suite, unit, or building).
-            attr_accessor :line2
-            # ZIP or postal code.
-            attr_accessor :postal_code
-            # State, county, province, or region.
-            attr_accessor :state
-
-            def initialize(
-              city: nil,
-              country: nil,
-              line1: nil,
-              line2: nil,
-              postal_code: nil,
-              state: nil
-            )
-              @city = city
-              @country = country
-              @line1 = line1
-              @line2 = line2
-              @postal_code = postal_code
-              @state = state
-            end
-          end
-
-          class Affiliate < Stripe::RequestParams
-            # The name of the affiliate that originated the purchase.
-            attr_accessor :name
-
-            def initialize(name: nil)
-              @name = name
-            end
-          end
-
-          class Delivery < Stripe::RequestParams
-            class Recipient < Stripe::RequestParams
-              # The email of the recipient the ticket is delivered to.
-              attr_accessor :email
-              # The name of the recipient the ticket is delivered to.
-              attr_accessor :name
-              # The phone number of the recipient the ticket is delivered to.
-              attr_accessor :phone
-
-              def initialize(email: nil, name: nil, phone: nil)
-                @email = email
-                @name = name
-                @phone = phone
-              end
-            end
-            # The delivery method for the payment
-            attr_accessor :mode
-            # Details of the recipient.
-            attr_accessor :recipient
-
-            def initialize(mode: nil, recipient: nil)
-              @mode = mode
-              @recipient = recipient
-            end
-          end
-
-          class Passenger < Stripe::RequestParams
-            # Full name of the person or entity on the lodging reservation.
-            attr_accessor :name
-
-            def initialize(name: nil)
-              @name = name
-            end
-          end
-          # The lodging location's address.
-          attr_accessor :address
-          # The number of adults on the booking
-          attr_accessor :adults
-          # Affiliate details for this purchase.
-          attr_accessor :affiliate
-          # The booking number associated with the lodging reservation.
-          attr_accessor :booking_number
-          # The lodging category
-          attr_accessor :category
-          # Lodging check-in time. Measured in seconds since the Unix epoch.
-          attr_accessor :checkin_at
-          # Lodging check-out time. Measured in seconds since the Unix epoch.
-          attr_accessor :checkout_at
-          # The customer service phone number of the lodging company.
-          attr_accessor :customer_service_phone_number
-          # The daily lodging room rate.
-          attr_accessor :daily_room_rate_amount
-          # Delivery details for this purchase.
-          attr_accessor :delivery
-          # List of additional charges being billed.
-          attr_accessor :extra_charges
-          # Indicates whether the lodging location is compliant with the Fire Safety Act.
-          attr_accessor :fire_safety_act_compliance
-          # The name of the lodging location.
-          attr_accessor :name
-          # Indicates if the customer did not keep their booking while failing to cancel the reservation.
-          attr_accessor :no_show
-          # The number of rooms on the booking
-          attr_accessor :number_of_rooms
-          # The details of the passengers in the travel reservation
-          attr_accessor :passengers
-          # The phone number of the lodging location.
-          attr_accessor :property_phone_number
-          # The room class for this purchase.
-          attr_accessor :room_class
-          # The number of room nights
-          attr_accessor :room_nights
-          # The total tax amount associating with the room reservation.
-          attr_accessor :total_room_tax_amount
-          # The total tax amount
-          attr_accessor :total_tax_amount
-
-          def initialize(
-            address: nil,
-            adults: nil,
-            affiliate: nil,
-            booking_number: nil,
-            category: nil,
-            checkin_at: nil,
-            checkout_at: nil,
-            customer_service_phone_number: nil,
-            daily_room_rate_amount: nil,
-            delivery: nil,
-            extra_charges: nil,
-            fire_safety_act_compliance: nil,
-            name: nil,
-            no_show: nil,
-            number_of_rooms: nil,
-            passengers: nil,
-            property_phone_number: nil,
-            room_class: nil,
-            room_nights: nil,
-            total_room_tax_amount: nil,
-            total_tax_amount: nil
-          )
-            @address = address
-            @adults = adults
-            @affiliate = affiliate
-            @booking_number = booking_number
-            @category = category
-            @checkin_at = checkin_at
-            @checkout_at = checkout_at
-            @customer_service_phone_number = customer_service_phone_number
-            @daily_room_rate_amount = daily_room_rate_amount
-            @delivery = delivery
-            @extra_charges = extra_charges
-            @fire_safety_act_compliance = fire_safety_act_compliance
-            @name = name
-            @no_show = no_show
-            @number_of_rooms = number_of_rooms
-            @passengers = passengers
-            @property_phone_number = property_phone_number
-            @room_class = room_class
-            @room_nights = room_nights
-            @total_room_tax_amount = total_room_tax_amount
-            @total_tax_amount = total_tax_amount
-          end
-        end
-
-        class Subscription < Stripe::RequestParams
-          class Affiliate < Stripe::RequestParams
-            # The name of the affiliate that originated the purchase.
-            attr_accessor :name
-
-            def initialize(name: nil)
-              @name = name
-            end
-          end
-
-          class BillingInterval < Stripe::RequestParams
-            # The number of intervals, as an whole number greater than 0. Stripe multiplies this by the interval type to get the overall duration.
-            attr_accessor :count
-            # Specifies a type of interval unit. Either `day`, `week`, `month` or `year`.
-            attr_accessor :interval
-
-            def initialize(count: nil, interval: nil)
-              @count = count
-              @interval = interval
-            end
-          end
-          # Affiliate details for this purchase.
-          attr_accessor :affiliate
-          # Info whether the subscription will be auto renewed upon expiry.
-          attr_accessor :auto_renewal
-          # Subscription billing details for this purchase.
-          attr_accessor :billing_interval
-          # Subscription end time. Measured in seconds since the Unix epoch.
-          attr_accessor :ends_at
-          # Name of the product on subscription. e.g. Apple Music Subscription
-          attr_accessor :name
-          # Subscription start time. Measured in seconds since the Unix epoch.
-          attr_accessor :starts_at
-
-          def initialize(
-            affiliate: nil,
-            auto_renewal: nil,
-            billing_interval: nil,
-            ends_at: nil,
-            name: nil,
-            starts_at: nil
-          )
-            @affiliate = affiliate
-            @auto_renewal = auto_renewal
-            @billing_interval = billing_interval
-            @ends_at = ends_at
-            @name = name
-            @starts_at = starts_at
-          end
-        end
-        # Car rental details for this PaymentIntent.
-        attr_accessor :car_rental
-        # Some customers might be required by their company or organization to provide this information. If so, provide this value. Otherwise you can ignore this field.
-        attr_accessor :customer_reference
-        # Event details for this PaymentIntent
-        attr_accessor :event_details
-        # Flight reservation details for this PaymentIntent
-        attr_accessor :flight
-        # Lodging reservation details for this PaymentIntent
-        attr_accessor :lodging
-        # A unique value assigned by the business to identify the transaction.
-        attr_accessor :order_reference
-        # Subscription details for this PaymentIntent
-        attr_accessor :subscription
-
-        def initialize(
-          car_rental: nil,
-          customer_reference: nil,
-          event_details: nil,
-          flight: nil,
-          lodging: nil,
-          order_reference: nil,
-          subscription: nil
-        )
-          @car_rental = car_rental
-          @customer_reference = customer_reference
-          @event_details = event_details
-          @flight = flight
-          @lodging = lodging
-          @order_reference = order_reference
-          @subscription = subscription
-        end
-      end
-
       class Shipping < Stripe::RequestParams
         class Address < Stripe::RequestParams
           # City, district, suburb, town, or village.
@@ -2285,8 +1493,6 @@ module Stripe
       attr_accessor :fraud_details
       # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
       attr_accessor :metadata
-      # Provides industry-specific information about the charge.
-      attr_accessor :payment_details
       # This is the email address that the receipt for this charge will be sent to. If this field is updated, then a new email receipt will be sent to the updated address.
       attr_accessor :receipt_email
       # Shipping information for the charge. Helps prevent fraud on charges for physical goods.
@@ -2300,7 +1506,6 @@ module Stripe
         expand: nil,
         fraud_details: nil,
         metadata: nil,
-        payment_details: nil,
         receipt_email: nil,
         shipping: nil,
         transfer_group: nil
@@ -2310,7 +1515,6 @@ module Stripe
         @expand = expand
         @fraud_details = fraud_details
         @metadata = metadata
-        @payment_details = payment_details
         @receipt_email = receipt_email
         @shipping = shipping
         @transfer_group = transfer_group
@@ -2336,711 +1540,6 @@ module Stripe
     end
 
     class CaptureParams < Stripe::RequestParams
-      class PaymentDetails < Stripe::RequestParams
-        class CarRental < Stripe::RequestParams
-          class Affiliate < Stripe::RequestParams
-            # The name of the affiliate that originated the purchase.
-            attr_accessor :name
-
-            def initialize(name: nil)
-              @name = name
-            end
-          end
-
-          class Delivery < Stripe::RequestParams
-            class Recipient < Stripe::RequestParams
-              # The email of the recipient the ticket is delivered to.
-              attr_accessor :email
-              # The name of the recipient the ticket is delivered to.
-              attr_accessor :name
-              # The phone number of the recipient the ticket is delivered to.
-              attr_accessor :phone
-
-              def initialize(email: nil, name: nil, phone: nil)
-                @email = email
-                @name = name
-                @phone = phone
-              end
-            end
-            # The delivery method for the payment
-            attr_accessor :mode
-            # Details of the recipient.
-            attr_accessor :recipient
-
-            def initialize(mode: nil, recipient: nil)
-              @mode = mode
-              @recipient = recipient
-            end
-          end
-
-          class Distance < Stripe::RequestParams
-            # Distance traveled.
-            attr_accessor :amount
-            # Unit of measurement for the distance traveled. One of `miles` or `kilometers`.
-            attr_accessor :unit
-
-            def initialize(amount: nil, unit: nil)
-              @amount = amount
-              @unit = unit
-            end
-          end
-
-          class Driver < Stripe::RequestParams
-            # Driver's identification number.
-            attr_accessor :driver_identification_number
-            # Driver's tax number.
-            attr_accessor :driver_tax_number
-            # Full name of the person or entity on the car reservation.
-            attr_accessor :name
-
-            def initialize(driver_identification_number: nil, driver_tax_number: nil, name: nil)
-              @driver_identification_number = driver_identification_number
-              @driver_tax_number = driver_tax_number
-              @name = name
-            end
-          end
-
-          class PickupAddress < Stripe::RequestParams
-            # City, district, suburb, town, or village.
-            attr_accessor :city
-            # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
-            attr_accessor :country
-            # Address line 1 (e.g., street, PO Box, or company name).
-            attr_accessor :line1
-            # Address line 2 (e.g., apartment, suite, unit, or building).
-            attr_accessor :line2
-            # ZIP or postal code.
-            attr_accessor :postal_code
-            # State, county, province, or region.
-            attr_accessor :state
-
-            def initialize(
-              city: nil,
-              country: nil,
-              line1: nil,
-              line2: nil,
-              postal_code: nil,
-              state: nil
-            )
-              @city = city
-              @country = country
-              @line1 = line1
-              @line2 = line2
-              @postal_code = postal_code
-              @state = state
-            end
-          end
-
-          class ReturnAddress < Stripe::RequestParams
-            # City, district, suburb, town, or village.
-            attr_accessor :city
-            # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
-            attr_accessor :country
-            # Address line 1 (e.g., street, PO Box, or company name).
-            attr_accessor :line1
-            # Address line 2 (e.g., apartment, suite, unit, or building).
-            attr_accessor :line2
-            # ZIP or postal code.
-            attr_accessor :postal_code
-            # State, county, province, or region.
-            attr_accessor :state
-
-            def initialize(
-              city: nil,
-              country: nil,
-              line1: nil,
-              line2: nil,
-              postal_code: nil,
-              state: nil
-            )
-              @city = city
-              @country = country
-              @line1 = line1
-              @line2 = line2
-              @postal_code = postal_code
-              @state = state
-            end
-          end
-          # Affiliate details for this purchase.
-          attr_accessor :affiliate
-          # The booking number associated with the car rental.
-          attr_accessor :booking_number
-          # Class code of the car.
-          attr_accessor :car_class_code
-          # Make of the car.
-          attr_accessor :car_make
-          # Model of the car.
-          attr_accessor :car_model
-          # The name of the rental car company.
-          attr_accessor :company
-          # The customer service phone number of the car rental company.
-          attr_accessor :customer_service_phone_number
-          # Number of days the car is being rented.
-          attr_accessor :days_rented
-          # Delivery details for this purchase.
-          attr_accessor :delivery
-          # The details of the distance traveled during the rental period.
-          attr_accessor :distance
-          # The details of the passengers in the travel reservation
-          attr_accessor :drivers
-          # List of additional charges being billed.
-          attr_accessor :extra_charges
-          # Indicates if the customer did not keep nor cancel their booking.
-          attr_accessor :no_show
-          # Car pick-up address.
-          attr_accessor :pickup_address
-          # Car pick-up time. Measured in seconds since the Unix epoch.
-          attr_accessor :pickup_at
-          # Name of the pickup location.
-          attr_accessor :pickup_location_name
-          # Rental rate.
-          attr_accessor :rate_amount
-          # The frequency at which the rate amount is applied. One of `day`, `week` or `month`
-          attr_accessor :rate_interval
-          # The name of the person or entity renting the car.
-          attr_accessor :renter_name
-          # Car return address.
-          attr_accessor :return_address
-          # Car return time. Measured in seconds since the Unix epoch.
-          attr_accessor :return_at
-          # Name of the return location.
-          attr_accessor :return_location_name
-          # Indicates whether the goods or services are tax-exempt or tax is not collected.
-          attr_accessor :tax_exempt
-          # The vehicle identification number.
-          attr_accessor :vehicle_identification_number
-
-          def initialize(
-            affiliate: nil,
-            booking_number: nil,
-            car_class_code: nil,
-            car_make: nil,
-            car_model: nil,
-            company: nil,
-            customer_service_phone_number: nil,
-            days_rented: nil,
-            delivery: nil,
-            distance: nil,
-            drivers: nil,
-            extra_charges: nil,
-            no_show: nil,
-            pickup_address: nil,
-            pickup_at: nil,
-            pickup_location_name: nil,
-            rate_amount: nil,
-            rate_interval: nil,
-            renter_name: nil,
-            return_address: nil,
-            return_at: nil,
-            return_location_name: nil,
-            tax_exempt: nil,
-            vehicle_identification_number: nil
-          )
-            @affiliate = affiliate
-            @booking_number = booking_number
-            @car_class_code = car_class_code
-            @car_make = car_make
-            @car_model = car_model
-            @company = company
-            @customer_service_phone_number = customer_service_phone_number
-            @days_rented = days_rented
-            @delivery = delivery
-            @distance = distance
-            @drivers = drivers
-            @extra_charges = extra_charges
-            @no_show = no_show
-            @pickup_address = pickup_address
-            @pickup_at = pickup_at
-            @pickup_location_name = pickup_location_name
-            @rate_amount = rate_amount
-            @rate_interval = rate_interval
-            @renter_name = renter_name
-            @return_address = return_address
-            @return_at = return_at
-            @return_location_name = return_location_name
-            @tax_exempt = tax_exempt
-            @vehicle_identification_number = vehicle_identification_number
-          end
-        end
-
-        class EventDetails < Stripe::RequestParams
-          class Address < Stripe::RequestParams
-            # City, district, suburb, town, or village.
-            attr_accessor :city
-            # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
-            attr_accessor :country
-            # Address line 1 (e.g., street, PO Box, or company name).
-            attr_accessor :line1
-            # Address line 2 (e.g., apartment, suite, unit, or building).
-            attr_accessor :line2
-            # ZIP or postal code.
-            attr_accessor :postal_code
-            # State, county, province, or region.
-            attr_accessor :state
-
-            def initialize(
-              city: nil,
-              country: nil,
-              line1: nil,
-              line2: nil,
-              postal_code: nil,
-              state: nil
-            )
-              @city = city
-              @country = country
-              @line1 = line1
-              @line2 = line2
-              @postal_code = postal_code
-              @state = state
-            end
-          end
-
-          class Affiliate < Stripe::RequestParams
-            # The name of the affiliate that originated the purchase.
-            attr_accessor :name
-
-            def initialize(name: nil)
-              @name = name
-            end
-          end
-
-          class Delivery < Stripe::RequestParams
-            class Recipient < Stripe::RequestParams
-              # The email of the recipient the ticket is delivered to.
-              attr_accessor :email
-              # The name of the recipient the ticket is delivered to.
-              attr_accessor :name
-              # The phone number of the recipient the ticket is delivered to.
-              attr_accessor :phone
-
-              def initialize(email: nil, name: nil, phone: nil)
-                @email = email
-                @name = name
-                @phone = phone
-              end
-            end
-            # The delivery method for the payment
-            attr_accessor :mode
-            # Details of the recipient.
-            attr_accessor :recipient
-
-            def initialize(mode: nil, recipient: nil)
-              @mode = mode
-              @recipient = recipient
-            end
-          end
-          # Indicates if the tickets are digitally checked when entering the venue.
-          attr_accessor :access_controlled_venue
-          # The event location's address.
-          attr_accessor :address
-          # Affiliate details for this purchase.
-          attr_accessor :affiliate
-          # The name of the company
-          attr_accessor :company
-          # Delivery details for this purchase.
-          attr_accessor :delivery
-          # Event end time. Measured in seconds since the Unix epoch.
-          attr_accessor :ends_at
-          # Type of the event entertainment (concert, sports event etc)
-          attr_accessor :genre
-          # The name of the event.
-          attr_accessor :name
-          # Event start time. Measured in seconds since the Unix epoch.
-          attr_accessor :starts_at
-
-          def initialize(
-            access_controlled_venue: nil,
-            address: nil,
-            affiliate: nil,
-            company: nil,
-            delivery: nil,
-            ends_at: nil,
-            genre: nil,
-            name: nil,
-            starts_at: nil
-          )
-            @access_controlled_venue = access_controlled_venue
-            @address = address
-            @affiliate = affiliate
-            @company = company
-            @delivery = delivery
-            @ends_at = ends_at
-            @genre = genre
-            @name = name
-            @starts_at = starts_at
-          end
-        end
-
-        class Flight < Stripe::RequestParams
-          class Affiliate < Stripe::RequestParams
-            # The name of the affiliate that originated the purchase.
-            attr_accessor :name
-
-            def initialize(name: nil)
-              @name = name
-            end
-          end
-
-          class Delivery < Stripe::RequestParams
-            class Recipient < Stripe::RequestParams
-              # The email of the recipient the ticket is delivered to.
-              attr_accessor :email
-              # The name of the recipient the ticket is delivered to.
-              attr_accessor :name
-              # The phone number of the recipient the ticket is delivered to.
-              attr_accessor :phone
-
-              def initialize(email: nil, name: nil, phone: nil)
-                @email = email
-                @name = name
-                @phone = phone
-              end
-            end
-            # The delivery method for the payment
-            attr_accessor :mode
-            # Details of the recipient.
-            attr_accessor :recipient
-
-            def initialize(mode: nil, recipient: nil)
-              @mode = mode
-              @recipient = recipient
-            end
-          end
-
-          class Passenger < Stripe::RequestParams
-            # Full name of the person or entity on the flight reservation.
-            attr_accessor :name
-
-            def initialize(name: nil)
-              @name = name
-            end
-          end
-
-          class Segment < Stripe::RequestParams
-            # The flight segment amount.
-            attr_accessor :amount
-            # The International Air Transport Association (IATA) airport code for the arrival airport.
-            attr_accessor :arrival_airport
-            # The arrival time for the flight segment. Measured in seconds since the Unix epoch.
-            attr_accessor :arrives_at
-            # The International Air Transport Association (IATA) carrier code of the carrier operating the flight segment.
-            attr_accessor :carrier
-            # The departure time for the flight segment. Measured in seconds since the Unix epoch.
-            attr_accessor :departs_at
-            # The International Air Transport Association (IATA) airport code for the departure airport.
-            attr_accessor :departure_airport
-            # The flight number associated with the segment
-            attr_accessor :flight_number
-            # The fare class for the segment.
-            attr_accessor :service_class
-
-            def initialize(
-              amount: nil,
-              arrival_airport: nil,
-              arrives_at: nil,
-              carrier: nil,
-              departs_at: nil,
-              departure_airport: nil,
-              flight_number: nil,
-              service_class: nil
-            )
-              @amount = amount
-              @arrival_airport = arrival_airport
-              @arrives_at = arrives_at
-              @carrier = carrier
-              @departs_at = departs_at
-              @departure_airport = departure_airport
-              @flight_number = flight_number
-              @service_class = service_class
-            end
-          end
-          # Affiliate details for this purchase.
-          attr_accessor :affiliate
-          # The agency number (i.e. International Air Transport Association (IATA) agency number) of the travel agency that made the booking.
-          attr_accessor :agency_number
-          # The International Air Transport Association (IATA) carrier code of the carrier that issued the ticket.
-          attr_accessor :carrier
-          # Delivery details for this purchase.
-          attr_accessor :delivery
-          # The name of the person or entity on the reservation.
-          attr_accessor :passenger_name
-          # The details of the passengers in the travel reservation.
-          attr_accessor :passengers
-          # The individual flight segments associated with the trip.
-          attr_accessor :segments
-          # The ticket number associated with the travel reservation.
-          attr_accessor :ticket_number
-
-          def initialize(
-            affiliate: nil,
-            agency_number: nil,
-            carrier: nil,
-            delivery: nil,
-            passenger_name: nil,
-            passengers: nil,
-            segments: nil,
-            ticket_number: nil
-          )
-            @affiliate = affiliate
-            @agency_number = agency_number
-            @carrier = carrier
-            @delivery = delivery
-            @passenger_name = passenger_name
-            @passengers = passengers
-            @segments = segments
-            @ticket_number = ticket_number
-          end
-        end
-
-        class Lodging < Stripe::RequestParams
-          class Address < Stripe::RequestParams
-            # City, district, suburb, town, or village.
-            attr_accessor :city
-            # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
-            attr_accessor :country
-            # Address line 1 (e.g., street, PO Box, or company name).
-            attr_accessor :line1
-            # Address line 2 (e.g., apartment, suite, unit, or building).
-            attr_accessor :line2
-            # ZIP or postal code.
-            attr_accessor :postal_code
-            # State, county, province, or region.
-            attr_accessor :state
-
-            def initialize(
-              city: nil,
-              country: nil,
-              line1: nil,
-              line2: nil,
-              postal_code: nil,
-              state: nil
-            )
-              @city = city
-              @country = country
-              @line1 = line1
-              @line2 = line2
-              @postal_code = postal_code
-              @state = state
-            end
-          end
-
-          class Affiliate < Stripe::RequestParams
-            # The name of the affiliate that originated the purchase.
-            attr_accessor :name
-
-            def initialize(name: nil)
-              @name = name
-            end
-          end
-
-          class Delivery < Stripe::RequestParams
-            class Recipient < Stripe::RequestParams
-              # The email of the recipient the ticket is delivered to.
-              attr_accessor :email
-              # The name of the recipient the ticket is delivered to.
-              attr_accessor :name
-              # The phone number of the recipient the ticket is delivered to.
-              attr_accessor :phone
-
-              def initialize(email: nil, name: nil, phone: nil)
-                @email = email
-                @name = name
-                @phone = phone
-              end
-            end
-            # The delivery method for the payment
-            attr_accessor :mode
-            # Details of the recipient.
-            attr_accessor :recipient
-
-            def initialize(mode: nil, recipient: nil)
-              @mode = mode
-              @recipient = recipient
-            end
-          end
-
-          class Passenger < Stripe::RequestParams
-            # Full name of the person or entity on the lodging reservation.
-            attr_accessor :name
-
-            def initialize(name: nil)
-              @name = name
-            end
-          end
-          # The lodging location's address.
-          attr_accessor :address
-          # The number of adults on the booking
-          attr_accessor :adults
-          # Affiliate details for this purchase.
-          attr_accessor :affiliate
-          # The booking number associated with the lodging reservation.
-          attr_accessor :booking_number
-          # The lodging category
-          attr_accessor :category
-          # Lodging check-in time. Measured in seconds since the Unix epoch.
-          attr_accessor :checkin_at
-          # Lodging check-out time. Measured in seconds since the Unix epoch.
-          attr_accessor :checkout_at
-          # The customer service phone number of the lodging company.
-          attr_accessor :customer_service_phone_number
-          # The daily lodging room rate.
-          attr_accessor :daily_room_rate_amount
-          # Delivery details for this purchase.
-          attr_accessor :delivery
-          # List of additional charges being billed.
-          attr_accessor :extra_charges
-          # Indicates whether the lodging location is compliant with the Fire Safety Act.
-          attr_accessor :fire_safety_act_compliance
-          # The name of the lodging location.
-          attr_accessor :name
-          # Indicates if the customer did not keep their booking while failing to cancel the reservation.
-          attr_accessor :no_show
-          # The number of rooms on the booking
-          attr_accessor :number_of_rooms
-          # The details of the passengers in the travel reservation
-          attr_accessor :passengers
-          # The phone number of the lodging location.
-          attr_accessor :property_phone_number
-          # The room class for this purchase.
-          attr_accessor :room_class
-          # The number of room nights
-          attr_accessor :room_nights
-          # The total tax amount associating with the room reservation.
-          attr_accessor :total_room_tax_amount
-          # The total tax amount
-          attr_accessor :total_tax_amount
-
-          def initialize(
-            address: nil,
-            adults: nil,
-            affiliate: nil,
-            booking_number: nil,
-            category: nil,
-            checkin_at: nil,
-            checkout_at: nil,
-            customer_service_phone_number: nil,
-            daily_room_rate_amount: nil,
-            delivery: nil,
-            extra_charges: nil,
-            fire_safety_act_compliance: nil,
-            name: nil,
-            no_show: nil,
-            number_of_rooms: nil,
-            passengers: nil,
-            property_phone_number: nil,
-            room_class: nil,
-            room_nights: nil,
-            total_room_tax_amount: nil,
-            total_tax_amount: nil
-          )
-            @address = address
-            @adults = adults
-            @affiliate = affiliate
-            @booking_number = booking_number
-            @category = category
-            @checkin_at = checkin_at
-            @checkout_at = checkout_at
-            @customer_service_phone_number = customer_service_phone_number
-            @daily_room_rate_amount = daily_room_rate_amount
-            @delivery = delivery
-            @extra_charges = extra_charges
-            @fire_safety_act_compliance = fire_safety_act_compliance
-            @name = name
-            @no_show = no_show
-            @number_of_rooms = number_of_rooms
-            @passengers = passengers
-            @property_phone_number = property_phone_number
-            @room_class = room_class
-            @room_nights = room_nights
-            @total_room_tax_amount = total_room_tax_amount
-            @total_tax_amount = total_tax_amount
-          end
-        end
-
-        class Subscription < Stripe::RequestParams
-          class Affiliate < Stripe::RequestParams
-            # The name of the affiliate that originated the purchase.
-            attr_accessor :name
-
-            def initialize(name: nil)
-              @name = name
-            end
-          end
-
-          class BillingInterval < Stripe::RequestParams
-            # The number of intervals, as an whole number greater than 0. Stripe multiplies this by the interval type to get the overall duration.
-            attr_accessor :count
-            # Specifies a type of interval unit. Either `day`, `week`, `month` or `year`.
-            attr_accessor :interval
-
-            def initialize(count: nil, interval: nil)
-              @count = count
-              @interval = interval
-            end
-          end
-          # Affiliate details for this purchase.
-          attr_accessor :affiliate
-          # Info whether the subscription will be auto renewed upon expiry.
-          attr_accessor :auto_renewal
-          # Subscription billing details for this purchase.
-          attr_accessor :billing_interval
-          # Subscription end time. Measured in seconds since the Unix epoch.
-          attr_accessor :ends_at
-          # Name of the product on subscription. e.g. Apple Music Subscription
-          attr_accessor :name
-          # Subscription start time. Measured in seconds since the Unix epoch.
-          attr_accessor :starts_at
-
-          def initialize(
-            affiliate: nil,
-            auto_renewal: nil,
-            billing_interval: nil,
-            ends_at: nil,
-            name: nil,
-            starts_at: nil
-          )
-            @affiliate = affiliate
-            @auto_renewal = auto_renewal
-            @billing_interval = billing_interval
-            @ends_at = ends_at
-            @name = name
-            @starts_at = starts_at
-          end
-        end
-        # Car rental details for this PaymentIntent.
-        attr_accessor :car_rental
-        # Some customers might be required by their company or organization to provide this information. If so, provide this value. Otherwise you can ignore this field.
-        attr_accessor :customer_reference
-        # Event details for this PaymentIntent
-        attr_accessor :event_details
-        # Flight reservation details for this PaymentIntent
-        attr_accessor :flight
-        # Lodging reservation details for this PaymentIntent
-        attr_accessor :lodging
-        # A unique value assigned by the business to identify the transaction.
-        attr_accessor :order_reference
-        # Subscription details for this PaymentIntent
-        attr_accessor :subscription
-
-        def initialize(
-          car_rental: nil,
-          customer_reference: nil,
-          event_details: nil,
-          flight: nil,
-          lodging: nil,
-          order_reference: nil,
-          subscription: nil
-        )
-          @car_rental = car_rental
-          @customer_reference = customer_reference
-          @event_details = event_details
-          @flight = flight
-          @lodging = lodging
-          @order_reference = order_reference
-          @subscription = subscription
-        end
-      end
-
       class TransferData < Stripe::RequestParams
         # The amount transferred to the destination account, if specified. By default, the entire charge amount is transferred to the destination account.
         attr_accessor :amount
@@ -3057,8 +1556,6 @@ module Stripe
       attr_accessor :application_fee_amount
       # Specifies which fields in the response should be expanded.
       attr_accessor :expand
-      # Provides industry-specific information about the charge.
-      attr_accessor :payment_details
       # The email address to send this charge's receipt to. This will override the previously-specified email address for this charge, if one was set. Receipts will not be sent in test mode.
       attr_accessor :receipt_email
       # For a non-card charge, text that appears on the customer's statement as the statement descriptor. This value overrides the account's default statement descriptor. For information about requirements, including the 22-character limit, see [the Statement Descriptor docs](https://docs.stripe.com/get-started/account/statement-descriptors).
@@ -3077,7 +1574,6 @@ module Stripe
         application_fee: nil,
         application_fee_amount: nil,
         expand: nil,
-        payment_details: nil,
         receipt_email: nil,
         statement_descriptor: nil,
         statement_descriptor_suffix: nil,
@@ -3088,7 +1584,6 @@ module Stripe
         @application_fee = application_fee
         @application_fee_amount = application_fee_amount
         @expand = expand
-        @payment_details = payment_details
         @receipt_email = receipt_email
         @statement_descriptor = statement_descriptor
         @statement_descriptor_suffix = statement_descriptor_suffix