stripe 15.2.0 → 15.3.0.pre.beta.1

data/rbi/stripe/resources/treasury/transaction.rbi

@@ -1,215 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-# typed: true
-module Stripe
-  module Treasury
-    # Transactions represent changes to a [FinancialAccount's](https://stripe.com/docs/api#financial_accounts) balance.
-    class Transaction < APIResource
-      class BalanceImpact < Stripe::StripeObject
-        # The change made to funds the user can spend right now.
-        sig { returns(Integer) }
-        attr_reader :cash
-        # The change made to funds that are not spendable yet, but will become available at a later time.
-        sig { returns(Integer) }
-        attr_reader :inbound_pending
-        # The change made to funds in the account, but not spendable because they are being held for pending outbound flows.
-        sig { returns(Integer) }
-        attr_reader :outbound_pending
-      end
-      class FlowDetails < Stripe::StripeObject
-        # You can reverse some [ReceivedCredits](https://stripe.com/docs/api#received_credits) depending on their network and source flow. Reversing a ReceivedCredit leads to the creation of a new object known as a CreditReversal.
-        sig { returns(Stripe::Treasury::CreditReversal) }
-        attr_reader :credit_reversal
-        # You can reverse some [ReceivedDebits](https://stripe.com/docs/api#received_debits) depending on their network and source flow. Reversing a ReceivedDebit leads to the creation of a new object known as a DebitReversal.
-        sig { returns(Stripe::Treasury::DebitReversal) }
-        attr_reader :debit_reversal
-        # Use [InboundTransfers](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/into/inbound-transfers) to add funds to your [FinancialAccount](https://stripe.com/docs/api#financial_accounts) via a PaymentMethod that is owned by you. The funds will be transferred via an ACH debit.
-        #
-        # Related guide: [Moving money with Treasury using InboundTransfer objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/into/inbound-transfers)
-        sig { returns(Stripe::Treasury::InboundTransfer) }
-        attr_reader :inbound_transfer
-        # When an [issued card](https://stripe.com/docs/issuing) is used to make a purchase, an Issuing `Authorization`
-        # object is created. [Authorizations](https://stripe.com/docs/issuing/purchases/authorizations) must be approved for the
-        # purchase to be completed successfully.
-        #
-        # Related guide: [Issued card authorizations](https://stripe.com/docs/issuing/purchases/authorizations)
-        sig { returns(Stripe::Issuing::Authorization) }
-        attr_reader :issuing_authorization
-        # Use [OutboundPayments](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-payments) to send funds to another party's external bank account or [FinancialAccount](https://stripe.com/docs/api#financial_accounts). To send money to an account belonging to the same user, use an [OutboundTransfer](https://stripe.com/docs/api#outbound_transfers).
-        #
-        # Simulate OutboundPayment state changes with the `/v1/test_helpers/treasury/outbound_payments` endpoints. These methods can only be called on test mode objects.
-        #
-        # Related guide: [Moving money with Treasury using OutboundPayment objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-payments)
-        sig { returns(Stripe::Treasury::OutboundPayment) }
-        attr_reader :outbound_payment
-        # Use [OutboundTransfers](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-transfers) to transfer funds from a [FinancialAccount](https://stripe.com/docs/api#financial_accounts) to a PaymentMethod belonging to the same entity. To send funds to a different party, use [OutboundPayments](https://stripe.com/docs/api#outbound_payments) instead. You can send funds over ACH rails or through a domestic wire transfer to a user's own external bank account.
-        #
-        # Simulate OutboundTransfer state changes with the `/v1/test_helpers/treasury/outbound_transfers` endpoints. These methods can only be called on test mode objects.
-        #
-        # Related guide: [Moving money with Treasury using OutboundTransfer objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-transfers)
-        sig { returns(Stripe::Treasury::OutboundTransfer) }
-        attr_reader :outbound_transfer
-        # ReceivedCredits represent funds sent to a [FinancialAccount](https://stripe.com/docs/api#financial_accounts) (for example, via ACH or wire). These money movements are not initiated from the FinancialAccount.
-        sig { returns(Stripe::Treasury::ReceivedCredit) }
-        attr_reader :received_credit
-        # ReceivedDebits represent funds pulled from a [FinancialAccount](https://stripe.com/docs/api#financial_accounts). These are not initiated from the FinancialAccount.
-        sig { returns(Stripe::Treasury::ReceivedDebit) }
-        attr_reader :received_debit
-        # Type of the flow that created the Transaction. Set to the same value as `flow_type`.
-        sig { returns(String) }
-        attr_reader :type
-      end
-      class StatusTransitions < Stripe::StripeObject
-        # Timestamp describing when the Transaction changed status to `posted`.
-        sig { returns(T.nilable(Integer)) }
-        attr_reader :posted_at
-        # Timestamp describing when the Transaction changed status to `void`.
-        sig { returns(T.nilable(Integer)) }
-        attr_reader :void_at
-      end
-      # Amount (in cents) transferred.
-      sig { returns(Integer) }
-      attr_reader :amount
-      # Change to a FinancialAccount's balance
-      sig { returns(BalanceImpact) }
-      attr_reader :balance_impact
-      # Time at which the object was created. Measured in seconds since the Unix epoch.
-      sig { returns(Integer) }
-      attr_reader :created
-      # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
-      sig { returns(String) }
-      attr_reader :currency
-      # An arbitrary string attached to the object. Often useful for displaying to users.
-      sig { returns(String) }
-      attr_reader :description
-      # A list of TransactionEntries that are part of this Transaction. This cannot be expanded in any list endpoints.
-      sig { returns(T.nilable(Stripe::ListObject)) }
-      attr_reader :entries
-      # The FinancialAccount associated with this object.
-      sig { returns(String) }
-      attr_reader :financial_account
-      # ID of the flow that created the Transaction.
-      sig { returns(T.nilable(String)) }
-      attr_reader :flow
-      # Details of the flow that created the Transaction.
-      sig { returns(T.nilable(FlowDetails)) }
-      attr_reader :flow_details
-      # Type of the flow that created the Transaction.
-      sig { returns(String) }
-      attr_reader :flow_type
-      # Unique identifier for the object.
-      sig { returns(String) }
-      attr_reader :id
-      # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
-      sig { returns(T::Boolean) }
-      attr_reader :livemode
-      # String representing the object's type. Objects of the same type share the same value.
-      sig { returns(String) }
-      attr_reader :object
-      # Status of the Transaction.
-      sig { returns(String) }
-      attr_reader :status
-      # Attribute for field status_transitions
-      sig { returns(StatusTransitions) }
-      attr_reader :status_transitions
-      class ListParams < Stripe::RequestParams
-        class Created < Stripe::RequestParams
-          # Minimum value to filter by (exclusive)
-          sig { returns(T.nilable(Integer)) }
-          attr_accessor :gt
-          # Minimum value to filter by (inclusive)
-          sig { returns(T.nilable(Integer)) }
-          attr_accessor :gte
-          # Maximum value to filter by (exclusive)
-          sig { returns(T.nilable(Integer)) }
-          attr_accessor :lt
-          # Maximum value to filter by (inclusive)
-          sig { returns(T.nilable(Integer)) }
-          attr_accessor :lte
-          sig {
-            params(gt: T.nilable(Integer), gte: T.nilable(Integer), lt: T.nilable(Integer), lte: T.nilable(Integer)).void
-           }
-          def initialize(gt: nil, gte: nil, lt: nil, lte: nil); end
-        end
-        class StatusTransitions < Stripe::RequestParams
-          class PostedAt < Stripe::RequestParams
-            # Minimum value to filter by (exclusive)
-            sig { returns(T.nilable(Integer)) }
-            attr_accessor :gt
-            # Minimum value to filter by (inclusive)
-            sig { returns(T.nilable(Integer)) }
-            attr_accessor :gte
-            # Maximum value to filter by (exclusive)
-            sig { returns(T.nilable(Integer)) }
-            attr_accessor :lt
-            # Maximum value to filter by (inclusive)
-            sig { returns(T.nilable(Integer)) }
-            attr_accessor :lte
-            sig {
-              params(gt: T.nilable(Integer), gte: T.nilable(Integer), lt: T.nilable(Integer), lte: T.nilable(Integer)).void
-             }
-            def initialize(gt: nil, gte: nil, lt: nil, lte: nil); end
-          end
-          # Returns Transactions with `posted_at` within the specified range.
-          sig {
-            returns(T.nilable(T.any(::Stripe::Treasury::Transaction::ListParams::StatusTransitions::PostedAt, Integer)))
-           }
-          attr_accessor :posted_at
-          sig {
-            params(posted_at: T.nilable(T.any(::Stripe::Treasury::Transaction::ListParams::StatusTransitions::PostedAt, Integer))).void
-           }
-          def initialize(posted_at: nil); end
-        end
-        # Only return Transactions that were created during the given date interval.
-        sig {
-          returns(T.nilable(T.any(::Stripe::Treasury::Transaction::ListParams::Created, Integer)))
-         }
-        attr_accessor :created
-        # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
-        sig { returns(T.nilable(String)) }
-        attr_accessor :ending_before
-        # Specifies which fields in the response should be expanded.
-        sig { returns(T.nilable(T::Array[String])) }
-        attr_accessor :expand
-        # Returns objects associated with this FinancialAccount.
-        sig { returns(String) }
-        attr_accessor :financial_account
-        # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
-        sig { returns(T.nilable(Integer)) }
-        attr_accessor :limit
-        # The results are in reverse chronological order by `created` or `posted_at`. The default is `created`.
-        sig { returns(T.nilable(String)) }
-        attr_accessor :order_by
-        # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
-        sig { returns(T.nilable(String)) }
-        attr_accessor :starting_after
-        # Only return Transactions that have the given status: `open`, `posted`, or `void`.
-        sig { returns(T.nilable(String)) }
-        attr_accessor :status
-        # A filter for the `status_transitions.posted_at` timestamp. When using this filter, `status=posted` and `order_by=posted_at` must also be specified.
-        sig { returns(T.nilable(::Stripe::Treasury::Transaction::ListParams::StatusTransitions)) }
-        attr_accessor :status_transitions
-        sig {
-          params(created: T.nilable(T.any(::Stripe::Treasury::Transaction::ListParams::Created, Integer)), ending_before: T.nilable(String), expand: T.nilable(T::Array[String]), financial_account: String, limit: T.nilable(Integer), order_by: T.nilable(String), starting_after: T.nilable(String), status: T.nilable(String), status_transitions: T.nilable(::Stripe::Treasury::Transaction::ListParams::StatusTransitions)).void
-         }
-        def initialize(
-          created: nil,
-          ending_before: nil,
-          expand: nil,
-          financial_account: nil,
-          limit: nil,
-          order_by: nil,
-          starting_after: nil,
-          status: nil,
-          status_transitions: nil
-        ); end
-      end
-      # Retrieves a list of Transaction objects.
-      sig {
-        params(params: T.any(::Stripe::Treasury::Transaction::ListParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::ListObject)
-       }
-      def self.list(params = {}, opts = {}); end
-    end
-  end
-end

data/rbi/stripe/resources/treasury/transaction_entry.rbi

@@ -1,192 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-# typed: true
-module Stripe
-  module Treasury
-    # TransactionEntries represent individual units of money movements within a single [Transaction](https://stripe.com/docs/api#transactions).
-    class TransactionEntry < APIResource
-      class BalanceImpact < Stripe::StripeObject
-        # The change made to funds the user can spend right now.
-        sig { returns(Integer) }
-        attr_reader :cash
-        # The change made to funds that are not spendable yet, but will become available at a later time.
-        sig { returns(Integer) }
-        attr_reader :inbound_pending
-        # The change made to funds in the account, but not spendable because they are being held for pending outbound flows.
-        sig { returns(Integer) }
-        attr_reader :outbound_pending
-      end
-      class FlowDetails < Stripe::StripeObject
-        # You can reverse some [ReceivedCredits](https://stripe.com/docs/api#received_credits) depending on their network and source flow. Reversing a ReceivedCredit leads to the creation of a new object known as a CreditReversal.
-        sig { returns(Stripe::Treasury::CreditReversal) }
-        attr_reader :credit_reversal
-        # You can reverse some [ReceivedDebits](https://stripe.com/docs/api#received_debits) depending on their network and source flow. Reversing a ReceivedDebit leads to the creation of a new object known as a DebitReversal.
-        sig { returns(Stripe::Treasury::DebitReversal) }
-        attr_reader :debit_reversal
-        # Use [InboundTransfers](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/into/inbound-transfers) to add funds to your [FinancialAccount](https://stripe.com/docs/api#financial_accounts) via a PaymentMethod that is owned by you. The funds will be transferred via an ACH debit.
-        #
-        # Related guide: [Moving money with Treasury using InboundTransfer objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/into/inbound-transfers)
-        sig { returns(Stripe::Treasury::InboundTransfer) }
-        attr_reader :inbound_transfer
-        # When an [issued card](https://stripe.com/docs/issuing) is used to make a purchase, an Issuing `Authorization`
-        # object is created. [Authorizations](https://stripe.com/docs/issuing/purchases/authorizations) must be approved for the
-        # purchase to be completed successfully.
-        #
-        # Related guide: [Issued card authorizations](https://stripe.com/docs/issuing/purchases/authorizations)
-        sig { returns(Stripe::Issuing::Authorization) }
-        attr_reader :issuing_authorization
-        # Use [OutboundPayments](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-payments) to send funds to another party's external bank account or [FinancialAccount](https://stripe.com/docs/api#financial_accounts). To send money to an account belonging to the same user, use an [OutboundTransfer](https://stripe.com/docs/api#outbound_transfers).
-        #
-        # Simulate OutboundPayment state changes with the `/v1/test_helpers/treasury/outbound_payments` endpoints. These methods can only be called on test mode objects.
-        #
-        # Related guide: [Moving money with Treasury using OutboundPayment objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-payments)
-        sig { returns(Stripe::Treasury::OutboundPayment) }
-        attr_reader :outbound_payment
-        # Use [OutboundTransfers](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-transfers) to transfer funds from a [FinancialAccount](https://stripe.com/docs/api#financial_accounts) to a PaymentMethod belonging to the same entity. To send funds to a different party, use [OutboundPayments](https://stripe.com/docs/api#outbound_payments) instead. You can send funds over ACH rails or through a domestic wire transfer to a user's own external bank account.
-        #
-        # Simulate OutboundTransfer state changes with the `/v1/test_helpers/treasury/outbound_transfers` endpoints. These methods can only be called on test mode objects.
-        #
-        # Related guide: [Moving money with Treasury using OutboundTransfer objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-transfers)
-        sig { returns(Stripe::Treasury::OutboundTransfer) }
-        attr_reader :outbound_transfer
-        # ReceivedCredits represent funds sent to a [FinancialAccount](https://stripe.com/docs/api#financial_accounts) (for example, via ACH or wire). These money movements are not initiated from the FinancialAccount.
-        sig { returns(Stripe::Treasury::ReceivedCredit) }
-        attr_reader :received_credit
-        # ReceivedDebits represent funds pulled from a [FinancialAccount](https://stripe.com/docs/api#financial_accounts). These are not initiated from the FinancialAccount.
-        sig { returns(Stripe::Treasury::ReceivedDebit) }
-        attr_reader :received_debit
-        # Type of the flow that created the Transaction. Set to the same value as `flow_type`.
-        sig { returns(String) }
-        attr_reader :type
-      end
-      # Change to a FinancialAccount's balance
-      sig { returns(BalanceImpact) }
-      attr_reader :balance_impact
-      # Time at which the object was created. Measured in seconds since the Unix epoch.
-      sig { returns(Integer) }
-      attr_reader :created
-      # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
-      sig { returns(String) }
-      attr_reader :currency
-      # When the TransactionEntry will impact the FinancialAccount's balance.
-      sig { returns(Integer) }
-      attr_reader :effective_at
-      # The FinancialAccount associated with this object.
-      sig { returns(String) }
-      attr_reader :financial_account
-      # Token of the flow associated with the TransactionEntry.
-      sig { returns(T.nilable(String)) }
-      attr_reader :flow
-      # Details of the flow associated with the TransactionEntry.
-      sig { returns(T.nilable(FlowDetails)) }
-      attr_reader :flow_details
-      # Type of the flow associated with the TransactionEntry.
-      sig { returns(String) }
-      attr_reader :flow_type
-      # Unique identifier for the object.
-      sig { returns(String) }
-      attr_reader :id
-      # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
-      sig { returns(T::Boolean) }
-      attr_reader :livemode
-      # String representing the object's type. Objects of the same type share the same value.
-      sig { returns(String) }
-      attr_reader :object
-      # The Transaction associated with this object.
-      sig { returns(T.any(String, Stripe::Treasury::Transaction)) }
-      attr_reader :transaction
-      # The specific money movement that generated the TransactionEntry.
-      sig { returns(String) }
-      attr_reader :type
-      class ListParams < Stripe::RequestParams
-        class Created < Stripe::RequestParams
-          # Minimum value to filter by (exclusive)
-          sig { returns(T.nilable(Integer)) }
-          attr_accessor :gt
-          # Minimum value to filter by (inclusive)
-          sig { returns(T.nilable(Integer)) }
-          attr_accessor :gte
-          # Maximum value to filter by (exclusive)
-          sig { returns(T.nilable(Integer)) }
-          attr_accessor :lt
-          # Maximum value to filter by (inclusive)
-          sig { returns(T.nilable(Integer)) }
-          attr_accessor :lte
-          sig {
-            params(gt: T.nilable(Integer), gte: T.nilable(Integer), lt: T.nilable(Integer), lte: T.nilable(Integer)).void
-           }
-          def initialize(gt: nil, gte: nil, lt: nil, lte: nil); end
-        end
-        class EffectiveAt < Stripe::RequestParams
-          # Minimum value to filter by (exclusive)
-          sig { returns(T.nilable(Integer)) }
-          attr_accessor :gt
-          # Minimum value to filter by (inclusive)
-          sig { returns(T.nilable(Integer)) }
-          attr_accessor :gte
-          # Maximum value to filter by (exclusive)
-          sig { returns(T.nilable(Integer)) }
-          attr_accessor :lt
-          # Maximum value to filter by (inclusive)
-          sig { returns(T.nilable(Integer)) }
-          attr_accessor :lte
-          sig {
-            params(gt: T.nilable(Integer), gte: T.nilable(Integer), lt: T.nilable(Integer), lte: T.nilable(Integer)).void
-           }
-          def initialize(gt: nil, gte: nil, lt: nil, lte: nil); end
-        end
-        # Only return TransactionEntries that were created during the given date interval.
-        sig {
-          returns(T.nilable(T.any(::Stripe::Treasury::TransactionEntry::ListParams::Created, Integer)))
-         }
-        attr_accessor :created
-        # Attribute for param field effective_at
-        sig {
-          returns(T.nilable(T.any(::Stripe::Treasury::TransactionEntry::ListParams::EffectiveAt, Integer)))
-         }
-        attr_accessor :effective_at
-        # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
-        sig { returns(T.nilable(String)) }
-        attr_accessor :ending_before
-        # Specifies which fields in the response should be expanded.
-        sig { returns(T.nilable(T::Array[String])) }
-        attr_accessor :expand
-        # Returns objects associated with this FinancialAccount.
-        sig { returns(String) }
-        attr_accessor :financial_account
-        # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
-        sig { returns(T.nilable(Integer)) }
-        attr_accessor :limit
-        # The results are in reverse chronological order by `created` or `effective_at`. The default is `created`.
-        sig { returns(T.nilable(String)) }
-        attr_accessor :order_by
-        # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
-        sig { returns(T.nilable(String)) }
-        attr_accessor :starting_after
-        # Only return TransactionEntries associated with this Transaction.
-        sig { returns(T.nilable(String)) }
-        attr_accessor :transaction
-        sig {
-          params(created: T.nilable(T.any(::Stripe::Treasury::TransactionEntry::ListParams::Created, Integer)), effective_at: T.nilable(T.any(::Stripe::Treasury::TransactionEntry::ListParams::EffectiveAt, Integer)), ending_before: T.nilable(String), expand: T.nilable(T::Array[String]), financial_account: String, limit: T.nilable(Integer), order_by: T.nilable(String), starting_after: T.nilable(String), transaction: T.nilable(String)).void
-         }
-        def initialize(
-          created: nil,
-          effective_at: nil,
-          ending_before: nil,
-          expand: nil,
-          financial_account: nil,
-          limit: nil,
-          order_by: nil,
-          starting_after: nil,
-          transaction: nil
-        ); end
-      end
-      # Retrieves a list of TransactionEntry objects.
-      sig {
-        params(params: T.any(::Stripe::Treasury::TransactionEntry::ListParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::ListObject)
-       }
-      def self.list(params = {}, opts = {}); end
-    end
-  end
-end

data/rbi/stripe/resources/v2/amount.rbi

@@ -1,14 +0,0 @@
-# frozen_string_literal: true
-# typed: true
-
-module Stripe
-  module V2
-    class Amount
-      sig { returns(Integer) }
-      attr_reader :value
-
-      sig { returns(String) }
-      attr_reader :currency
-    end
-  end
-end

data/rbi/stripe/resources/v2/billing/meter_event.rbi

@@ -1,37 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-# typed: true
-module Stripe
-  module V2
-    module Billing
-      # Fix me empty_doc_string.
-      class MeterEvent < APIResource
-        # The creation time of this meter event.
-        sig { returns(String) }
-        attr_reader :created
-        # The name of the meter event. Corresponds with the `event_name` field on a meter.
-        sig { returns(String) }
-        attr_reader :event_name
-        # A unique identifier for the event. If not provided, one will be generated. We recommend using a globally unique identifier for this. We’ll enforce uniqueness within a rolling 24 hour period.
-        sig { returns(String) }
-        attr_reader :identifier
-        # String representing the object's type. Objects of the same type share the same value of the object field.
-        sig { returns(String) }
-        attr_reader :object
-        # The payload of the event. This must contain the fields corresponding to a meter’s
-        # `customer_mapping.event_payload_key` (default is `stripe_customer_id`) and
-        # `value_settings.event_payload_key` (default is `value`). Read more about the payload.
-        sig { returns(T::Hash[String, String]) }
-        attr_reader :payload
-        # The time of the event. Must be within the past 35 calendar days or up to
-        # 5 minutes in the future. Defaults to current timestamp if not specified.
-        sig { returns(String) }
-        attr_reader :timestamp
-        # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
-        sig { returns(T::Boolean) }
-        attr_reader :livemode
-      end
-    end
-  end
-end

data/rbi/stripe/resources/v2/billing/meter_event_adjustment.rbi

@@ -1,41 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-# typed: true
-module Stripe
-  module V2
-    module Billing
-      class MeterEventAdjustment < APIResource
-        class Cancel < Stripe::StripeObject
-          # Unique identifier for the event. You can only cancel events within 24 hours of Stripe receiving them.
-          sig { returns(String) }
-          attr_reader :identifier
-        end
-        # Specifies which event to cancel.
-        sig { returns(Cancel) }
-        attr_reader :cancel
-        # The time the adjustment was created.
-        sig { returns(String) }
-        attr_reader :created
-        # The name of the meter event. Corresponds with the `event_name` field on a meter.
-        sig { returns(String) }
-        attr_reader :event_name
-        # The unique id of this meter event adjustment.
-        sig { returns(String) }
-        attr_reader :id
-        # String representing the object's type. Objects of the same type share the same value of the object field.
-        sig { returns(String) }
-        attr_reader :object
-        # Open Enum. The meter event adjustment’s status.
-        sig { returns(String) }
-        attr_reader :status
-        # Open Enum. Specifies whether to cancel a single event or a range of events for a time period. Time period cancellation is not supported yet.
-        sig { returns(String) }
-        attr_reader :type
-        # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
-        sig { returns(T::Boolean) }
-        attr_reader :livemode
-      end
-    end
-  end
-end

data/rbi/stripe/resources/v2/billing/meter_event_session.rbi

@@ -1,31 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-# typed: true
-module Stripe
-  module V2
-    module Billing
-      class MeterEventSession < APIResource
-        # The authentication token for this session.  Use this token when calling the
-        # high-throughput meter event API.
-        sig { returns(String) }
-        attr_reader :authentication_token
-        # The creation time of this session.
-        sig { returns(String) }
-        attr_reader :created
-        # The time at which this session will expire.
-        sig { returns(String) }
-        attr_reader :expires_at
-        # The unique id of this auth session.
-        sig { returns(String) }
-        attr_reader :id
-        # String representing the object's type. Objects of the same type share the same value of the object field.
-        sig { returns(String) }
-        attr_reader :object
-        # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
-        sig { returns(T::Boolean) }
-        attr_reader :livemode
-      end
-    end
-  end
-end

data/rbi/stripe/resources/v2/event.rbi

@@ -1,48 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-# typed: true
-module Stripe
-  module V2
-    # Events are generated to keep you informed of activity in your business account. APIs in the /v2 namespace generate [thin events](https://docs.stripe.com/event-destinations#benefits-of-thin-events) which have small, unversioned payloads that include a reference to the ID of the object that has changed. The Events v2 API returns these new thin events. [Retrieve the event object](https://docs.stripe.com/event-destinations#fetch-data) for additional data about the event. Use the related object ID in the event payload to [fetch the API resource](https://docs.stripe.com/event-destinations#retrieve-the-object-associated-with-thin-events) of the object associated with the event. Comparatively, events generated by most API v1 include a versioned snapshot of an API object in their payload.
-    class Event < APIResource
-      class Reason < Stripe::StripeObject
-        class Request < Stripe::StripeObject
-          # ID of the API request that caused the event.
-          sig { returns(String) }
-          attr_reader :id
-          # The idempotency key transmitted during the request.
-          sig { returns(String) }
-          attr_reader :idempotency_key
-        end
-        # Event reason type.
-        sig { returns(String) }
-        attr_reader :type
-        # Information on the API request that instigated the event.
-        sig { returns(T.nilable(Request)) }
-        attr_reader :request
-      end
-      # Authentication context needed to fetch the event or related object.
-      sig { returns(T.nilable(String)) }
-      attr_reader :context
-      # Time at which the object was created.
-      sig { returns(String) }
-      attr_reader :created
-      # Unique identifier for the event.
-      sig { returns(String) }
-      attr_reader :id
-      # String representing the object's type. Objects of the same type share the same value of the object field.
-      sig { returns(String) }
-      attr_reader :object
-      # Reason for the event.
-      sig { returns(T.nilable(Reason)) }
-      attr_reader :reason
-      # The type of the event.
-      sig { returns(String) }
-      attr_reader :type
-      # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
-      sig { returns(T::Boolean) }
-      attr_reader :livemode
-    end
-  end
-end