stripe 15.0.0 → 15.1.0.pre.beta.2

data/rbi/stripe/resources/terminal/reader.rbi

@@ -1,587 +0,0 @@
-# File generated from our OpenAPI spec
-# frozen_string_literal: true
-
-# typed: true
-module Stripe
-  module Terminal
-    # A Reader represents a physical device for accepting payment details.
-    #
-    # Related guide: [Connecting to a reader](https://stripe.com/docs/terminal/payments/connect-reader)
-    class Reader < APIResource
-      class Action < Stripe::StripeObject
-        class ProcessPaymentIntent < Stripe::StripeObject
-          class ProcessConfig < Stripe::StripeObject
-            class Tipping < Stripe::StripeObject
-              # Amount used to calculate tip suggestions on tipping selection screen for this transaction. Must be a positive integer in the smallest currency unit (e.g., 100 cents to represent $1.00 or 100 to represent ¥100, a zero-decimal currency).
-              sig { returns(Integer) }
-              attr_reader :amount_eligible
-            end
-            # Enable customer initiated cancellation when processing this payment.
-            sig { returns(T::Boolean) }
-            attr_reader :enable_customer_cancellation
-            # Override showing a tipping selection screen on this transaction.
-            sig { returns(T::Boolean) }
-            attr_reader :skip_tipping
-            # Represents a per-transaction tipping configuration
-            sig { returns(Tipping) }
-            attr_reader :tipping
-          end
-          # Most recent PaymentIntent processed by the reader.
-          sig { returns(T.any(String, Stripe::PaymentIntent)) }
-          attr_reader :payment_intent
-          # Represents a per-transaction override of a reader configuration
-          sig { returns(ProcessConfig) }
-          attr_reader :process_config
-        end
-        class ProcessSetupIntent < Stripe::StripeObject
-          class ProcessConfig < Stripe::StripeObject
-            # Enable customer initiated cancellation when processing this SetupIntent.
-            sig { returns(T::Boolean) }
-            attr_reader :enable_customer_cancellation
-          end
-          # ID of a card PaymentMethod generated from the card_present PaymentMethod that may be attached to a Customer for future transactions. Only present if it was possible to generate a card PaymentMethod.
-          sig { returns(String) }
-          attr_reader :generated_card
-          # Represents a per-setup override of a reader configuration
-          sig { returns(ProcessConfig) }
-          attr_reader :process_config
-          # Most recent SetupIntent processed by the reader.
-          sig { returns(T.any(String, Stripe::SetupIntent)) }
-          attr_reader :setup_intent
-        end
-        class RefundPayment < Stripe::StripeObject
-          class RefundPaymentConfig < Stripe::StripeObject
-            # Enable customer initiated cancellation when refunding this payment.
-            sig { returns(T::Boolean) }
-            attr_reader :enable_customer_cancellation
-          end
-          # The amount being refunded.
-          sig { returns(Integer) }
-          attr_reader :amount
-          # Charge that is being refunded.
-          sig { returns(T.any(String, Stripe::Charge)) }
-          attr_reader :charge
-          # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
-          sig { returns(T::Hash[String, String]) }
-          attr_reader :metadata
-          # Payment intent that is being refunded.
-          sig { returns(T.any(String, Stripe::PaymentIntent)) }
-          attr_reader :payment_intent
-          # The reason for the refund.
-          sig { returns(String) }
-          attr_reader :reason
-          # Unique identifier for the refund object.
-          sig { returns(T.any(String, Stripe::Refund)) }
-          attr_reader :refund
-          # Boolean indicating whether the application fee should be refunded when refunding this charge. If a full charge refund is given, the full application fee will be refunded. Otherwise, the application fee will be refunded in an amount proportional to the amount of the charge refunded. An application fee can be refunded only by the application that created the charge.
-          sig { returns(T::Boolean) }
-          attr_reader :refund_application_fee
-          # Represents a per-transaction override of a reader configuration
-          sig { returns(RefundPaymentConfig) }
-          attr_reader :refund_payment_config
-          # Boolean indicating whether the transfer should be reversed when refunding this charge. The transfer will be reversed proportionally to the amount being refunded (either the entire or partial amount). A transfer can be reversed only by the application that created the charge.
-          sig { returns(T::Boolean) }
-          attr_reader :reverse_transfer
-        end
-        class SetReaderDisplay < Stripe::StripeObject
-          class Cart < Stripe::StripeObject
-            class LineItem < Stripe::StripeObject
-              # The amount of the line item. A positive integer in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal).
-              sig { returns(Integer) }
-              attr_reader :amount
-              # Description of the line item.
-              sig { returns(String) }
-              attr_reader :description
-              # The quantity of the line item.
-              sig { returns(Integer) }
-              attr_reader :quantity
-            end
-            # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
-            sig { returns(String) }
-            attr_reader :currency
-            # List of line items in the cart.
-            sig { returns(T::Array[LineItem]) }
-            attr_reader :line_items
-            # Tax amount for the entire cart. A positive integer in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal).
-            sig { returns(T.nilable(Integer)) }
-            attr_reader :tax
-            # Total amount for the entire cart, including tax. A positive integer in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal).
-            sig { returns(Integer) }
-            attr_reader :total
-          end
-          # Cart object to be displayed by the reader.
-          sig { returns(T.nilable(Cart)) }
-          attr_reader :cart
-          # Type of information to be displayed by the reader.
-          sig { returns(String) }
-          attr_reader :type
-        end
-        # Failure code, only set if status is `failed`.
-        sig { returns(T.nilable(String)) }
-        attr_reader :failure_code
-        # Detailed failure message, only set if status is `failed`.
-        sig { returns(T.nilable(String)) }
-        attr_reader :failure_message
-        # Represents a reader action to process a payment intent
-        sig { returns(ProcessPaymentIntent) }
-        attr_reader :process_payment_intent
-        # Represents a reader action to process a setup intent
-        sig { returns(ProcessSetupIntent) }
-        attr_reader :process_setup_intent
-        # Represents a reader action to refund a payment
-        sig { returns(RefundPayment) }
-        attr_reader :refund_payment
-        # Represents a reader action to set the reader display
-        sig { returns(SetReaderDisplay) }
-        attr_reader :set_reader_display
-        # Status of the action performed by the reader.
-        sig { returns(String) }
-        attr_reader :status
-        # Type of action performed by the reader.
-        sig { returns(String) }
-        attr_reader :type
-      end
-      # The most recent action performed by the reader.
-      sig { returns(T.nilable(Action)) }
-      attr_reader :action
-      # The current software version of the reader.
-      sig { returns(T.nilable(String)) }
-      attr_reader :device_sw_version
-      # Type of reader, one of `bbpos_wisepad3`, `stripe_m2`, `stripe_s700`, `bbpos_chipper2x`, `bbpos_wisepos_e`, `verifone_P400`, `simulated_wisepos_e`, or `mobile_phone_reader`.
-      sig { returns(String) }
-      attr_reader :device_type
-      # Unique identifier for the object.
-      sig { returns(String) }
-      attr_reader :id
-      # The local IP address of the reader.
-      sig { returns(T.nilable(String)) }
-      attr_reader :ip_address
-      # Custom label given to the reader for easier identification.
-      sig { returns(String) }
-      attr_reader :label
-      # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
-      sig { returns(T::Boolean) }
-      attr_reader :livemode
-      # The location identifier of the reader.
-      sig { returns(T.nilable(T.any(String, Stripe::Terminal::Location))) }
-      attr_reader :location
-      # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format.
-      sig { returns(T::Hash[String, String]) }
-      attr_reader :metadata
-      # String representing the object's type. Objects of the same type share the same value.
-      sig { returns(String) }
-      attr_reader :object
-      # Serial number of the reader.
-      sig { returns(String) }
-      attr_reader :serial_number
-      # The networking status of the reader. We do not recommend using this field in flows that may block taking payments.
-      sig { returns(T.nilable(String)) }
-      attr_reader :status
-      # Always true for a deleted object
-      sig { returns(T::Boolean) }
-      attr_reader :deleted
-      class DeleteParams < Stripe::RequestParams
-
-      end
-      class UpdateParams < Stripe::RequestParams
-        # Specifies which fields in the response should be expanded.
-        sig { returns(T.nilable(T::Array[String])) }
-        attr_accessor :expand
-        # The new label of the reader.
-        sig { returns(T.nilable(T.nilable(String))) }
-        attr_accessor :label
-        # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
-        sig { returns(T.nilable(T.nilable(T.any(String, T::Hash[String, String])))) }
-        attr_accessor :metadata
-        sig {
-          params(expand: T.nilable(T::Array[String]), label: T.nilable(T.nilable(String)), metadata: T.nilable(T.nilable(T.any(String, T::Hash[String, String])))).void
-         }
-        def initialize(expand: nil, label: nil, metadata: nil); end
-      end
-      class ListParams < Stripe::RequestParams
-        # Filters readers by device type
-        sig { returns(T.nilable(String)) }
-        attr_accessor :device_type
-        # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
-        sig { returns(T.nilable(String)) }
-        attr_accessor :ending_before
-        # Specifies which fields in the response should be expanded.
-        sig { returns(T.nilable(T::Array[String])) }
-        attr_accessor :expand
-        # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
-        sig { returns(T.nilable(Integer)) }
-        attr_accessor :limit
-        # A location ID to filter the response list to only readers at the specific location
-        sig { returns(T.nilable(String)) }
-        attr_accessor :location
-        # Filters readers by serial number
-        sig { returns(T.nilable(String)) }
-        attr_accessor :serial_number
-        # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
-        sig { returns(T.nilable(String)) }
-        attr_accessor :starting_after
-        # A status filter to filter readers to only offline or online readers
-        sig { returns(T.nilable(String)) }
-        attr_accessor :status
-        sig {
-          params(device_type: T.nilable(String), ending_before: T.nilable(String), expand: T.nilable(T::Array[String]), limit: T.nilable(Integer), location: T.nilable(String), serial_number: T.nilable(String), starting_after: T.nilable(String), status: T.nilable(String)).void
-         }
-        def initialize(
-          device_type: nil,
-          ending_before: nil,
-          expand: nil,
-          limit: nil,
-          location: nil,
-          serial_number: nil,
-          starting_after: nil,
-          status: nil
-        ); end
-      end
-      class CreateParams < Stripe::RequestParams
-        # Specifies which fields in the response should be expanded.
-        sig { returns(T.nilable(T::Array[String])) }
-        attr_accessor :expand
-        # Custom label given to the reader for easier identification. If no label is specified, the registration code will be used.
-        sig { returns(T.nilable(String)) }
-        attr_accessor :label
-        # The location to assign the reader to.
-        sig { returns(T.nilable(String)) }
-        attr_accessor :location
-        # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
-        sig { returns(T.nilable(T.nilable(T.any(String, T::Hash[String, String])))) }
-        attr_accessor :metadata
-        # A code generated by the reader used for registering to an account.
-        sig { returns(String) }
-        attr_accessor :registration_code
-        sig {
-          params(expand: T.nilable(T::Array[String]), label: T.nilable(String), location: T.nilable(String), metadata: T.nilable(T.nilable(T.any(String, T::Hash[String, String]))), registration_code: String).void
-         }
-        def initialize(
-          expand: nil,
-          label: nil,
-          location: nil,
-          metadata: nil,
-          registration_code: nil
-        ); end
-      end
-      class CancelActionParams < Stripe::RequestParams
-        # Specifies which fields in the response should be expanded.
-        sig { returns(T.nilable(T::Array[String])) }
-        attr_accessor :expand
-        sig { params(expand: T.nilable(T::Array[String])).void }
-        def initialize(expand: nil); end
-      end
-      class ProcessPaymentIntentParams < Stripe::RequestParams
-        class ProcessConfig < Stripe::RequestParams
-          class Tipping < Stripe::RequestParams
-            # Amount used to calculate tip suggestions on tipping selection screen for this transaction. Must be a positive integer in the smallest currency unit (e.g., 100 cents to represent $1.00 or 100 to represent ¥100, a zero-decimal currency).
-            sig { returns(T.nilable(Integer)) }
-            attr_accessor :amount_eligible
-            sig { params(amount_eligible: T.nilable(Integer)).void }
-            def initialize(amount_eligible: nil); end
-          end
-          # This field indicates whether this payment method can be shown again to its customer in a checkout flow. Stripe products such as Checkout and Elements use this field to determine whether a payment method can be shown as a saved payment method in a checkout flow.
-          sig { returns(T.nilable(String)) }
-          attr_accessor :allow_redisplay
-          # Enables cancel button on transaction screens.
-          sig { returns(T.nilable(T::Boolean)) }
-          attr_accessor :enable_customer_cancellation
-          # Override showing a tipping selection screen on this transaction.
-          sig { returns(T.nilable(T::Boolean)) }
-          attr_accessor :skip_tipping
-          # Tipping configuration for this transaction.
-          sig {
-            returns(T.nilable(::Stripe::Terminal::Reader::ProcessPaymentIntentParams::ProcessConfig::Tipping))
-           }
-          attr_accessor :tipping
-          sig {
-            params(allow_redisplay: T.nilable(String), enable_customer_cancellation: T.nilable(T::Boolean), skip_tipping: T.nilable(T::Boolean), tipping: T.nilable(::Stripe::Terminal::Reader::ProcessPaymentIntentParams::ProcessConfig::Tipping)).void
-           }
-          def initialize(
-            allow_redisplay: nil,
-            enable_customer_cancellation: nil,
-            skip_tipping: nil,
-            tipping: nil
-          ); end
-        end
-        # Specifies which fields in the response should be expanded.
-        sig { returns(T.nilable(T::Array[String])) }
-        attr_accessor :expand
-        # PaymentIntent ID
-        sig { returns(String) }
-        attr_accessor :payment_intent
-        # Configuration overrides
-        sig {
-          returns(T.nilable(::Stripe::Terminal::Reader::ProcessPaymentIntentParams::ProcessConfig))
-         }
-        attr_accessor :process_config
-        sig {
-          params(expand: T.nilable(T::Array[String]), payment_intent: String, process_config: T.nilable(::Stripe::Terminal::Reader::ProcessPaymentIntentParams::ProcessConfig)).void
-         }
-        def initialize(expand: nil, payment_intent: nil, process_config: nil); end
-      end
-      class ProcessSetupIntentParams < Stripe::RequestParams
-        class ProcessConfig < Stripe::RequestParams
-          # Enables cancel button on transaction screens.
-          sig { returns(T.nilable(T::Boolean)) }
-          attr_accessor :enable_customer_cancellation
-          sig { params(enable_customer_cancellation: T.nilable(T::Boolean)).void }
-          def initialize(enable_customer_cancellation: nil); end
-        end
-        # This field indicates whether this payment method can be shown again to its customer in a checkout flow. Stripe products such as Checkout and Elements use this field to determine whether a payment method can be shown as a saved payment method in a checkout flow.
-        sig { returns(String) }
-        attr_accessor :allow_redisplay
-        # Specifies which fields in the response should be expanded.
-        sig { returns(T.nilable(T::Array[String])) }
-        attr_accessor :expand
-        # Configuration overrides
-        sig {
-          returns(T.nilable(::Stripe::Terminal::Reader::ProcessSetupIntentParams::ProcessConfig))
-         }
-        attr_accessor :process_config
-        # SetupIntent ID
-        sig { returns(String) }
-        attr_accessor :setup_intent
-        sig {
-          params(allow_redisplay: String, expand: T.nilable(T::Array[String]), process_config: T.nilable(::Stripe::Terminal::Reader::ProcessSetupIntentParams::ProcessConfig), setup_intent: String).void
-         }
-        def initialize(
-          allow_redisplay: nil,
-          expand: nil,
-          process_config: nil,
-          setup_intent: nil
-        ); end
-      end
-      class RefundPaymentParams < Stripe::RequestParams
-        class RefundPaymentConfig < Stripe::RequestParams
-          # Enables cancel button on transaction screens.
-          sig { returns(T.nilable(T::Boolean)) }
-          attr_accessor :enable_customer_cancellation
-          sig { params(enable_customer_cancellation: T.nilable(T::Boolean)).void }
-          def initialize(enable_customer_cancellation: nil); end
-        end
-        # A positive integer in __cents__ representing how much of this charge to refund.
-        sig { returns(T.nilable(Integer)) }
-        attr_accessor :amount
-        # ID of the Charge to refund.
-        sig { returns(T.nilable(String)) }
-        attr_accessor :charge
-        # Specifies which fields in the response should be expanded.
-        sig { returns(T.nilable(T::Array[String])) }
-        attr_accessor :expand
-        # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
-        sig { returns(T.nilable(T::Hash[String, String])) }
-        attr_accessor :metadata
-        # ID of the PaymentIntent to refund.
-        sig { returns(T.nilable(String)) }
-        attr_accessor :payment_intent
-        # Boolean indicating whether the application fee should be refunded when refunding this charge. If a full charge refund is given, the full application fee will be refunded. Otherwise, the application fee will be refunded in an amount proportional to the amount of the charge refunded. An application fee can be refunded only by the application that created the charge.
-        sig { returns(T.nilable(T::Boolean)) }
-        attr_accessor :refund_application_fee
-        # Configuration overrides
-        sig {
-          returns(T.nilable(::Stripe::Terminal::Reader::RefundPaymentParams::RefundPaymentConfig))
-         }
-        attr_accessor :refund_payment_config
-        # Boolean indicating whether the transfer should be reversed when refunding this charge. The transfer will be reversed proportionally to the amount being refunded (either the entire or partial amount). A transfer can be reversed only by the application that created the charge.
-        sig { returns(T.nilable(T::Boolean)) }
-        attr_accessor :reverse_transfer
-        sig {
-          params(amount: T.nilable(Integer), charge: T.nilable(String), expand: T.nilable(T::Array[String]), metadata: T.nilable(T::Hash[String, String]), payment_intent: T.nilable(String), refund_application_fee: T.nilable(T::Boolean), refund_payment_config: T.nilable(::Stripe::Terminal::Reader::RefundPaymentParams::RefundPaymentConfig), reverse_transfer: T.nilable(T::Boolean)).void
-         }
-        def initialize(
-          amount: nil,
-          charge: nil,
-          expand: nil,
-          metadata: nil,
-          payment_intent: nil,
-          refund_application_fee: nil,
-          refund_payment_config: nil,
-          reverse_transfer: nil
-        ); end
-      end
-      class SetReaderDisplayParams < Stripe::RequestParams
-        class Cart < Stripe::RequestParams
-          class LineItem < Stripe::RequestParams
-            # The price of the item in cents.
-            sig { returns(Integer) }
-            attr_accessor :amount
-            # The description or name of the item.
-            sig { returns(String) }
-            attr_accessor :description
-            # The quantity of the line item being purchased.
-            sig { returns(Integer) }
-            attr_accessor :quantity
-            sig { params(amount: Integer, description: String, quantity: Integer).void }
-            def initialize(amount: nil, description: nil, quantity: nil); end
-          end
-          # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
-          sig { returns(String) }
-          attr_accessor :currency
-          # Array of line items that were purchased.
-          sig {
-            returns(T::Array[::Stripe::Terminal::Reader::SetReaderDisplayParams::Cart::LineItem])
-           }
-          attr_accessor :line_items
-          # The amount of tax in cents.
-          sig { returns(T.nilable(Integer)) }
-          attr_accessor :tax
-          # Total balance of cart due in cents.
-          sig { returns(Integer) }
-          attr_accessor :total
-          sig {
-            params(currency: String, line_items: T::Array[::Stripe::Terminal::Reader::SetReaderDisplayParams::Cart::LineItem], tax: T.nilable(Integer), total: Integer).void
-           }
-          def initialize(currency: nil, line_items: nil, tax: nil, total: nil); end
-        end
-        # Cart
-        sig { returns(T.nilable(::Stripe::Terminal::Reader::SetReaderDisplayParams::Cart)) }
-        attr_accessor :cart
-        # Specifies which fields in the response should be expanded.
-        sig { returns(T.nilable(T::Array[String])) }
-        attr_accessor :expand
-        # Type
-        sig { returns(String) }
-        attr_accessor :type
-        sig {
-          params(cart: T.nilable(::Stripe::Terminal::Reader::SetReaderDisplayParams::Cart), expand: T.nilable(T::Array[String]), type: String).void
-         }
-        def initialize(cart: nil, expand: nil, type: nil); end
-      end
-      class PresentPaymentMethodParams < Stripe::RequestParams
-        class CardPresent < Stripe::RequestParams
-          # The card number, as a string without any separators.
-          sig { returns(T.nilable(String)) }
-          attr_accessor :number
-          sig { params(number: T.nilable(String)).void }
-          def initialize(number: nil); end
-        end
-        class InteracPresent < Stripe::RequestParams
-          # Card Number
-          sig { returns(T.nilable(String)) }
-          attr_accessor :number
-          sig { params(number: T.nilable(String)).void }
-          def initialize(number: nil); end
-        end
-        # Simulated on-reader tip amount.
-        sig { returns(T.nilable(Integer)) }
-        attr_accessor :amount_tip
-        # Simulated data for the card_present payment method.
-        sig {
-          returns(T.nilable(::Stripe::Terminal::Reader::PresentPaymentMethodParams::CardPresent))
-         }
-        attr_accessor :card_present
-        # Specifies which fields in the response should be expanded.
-        sig { returns(T.nilable(T::Array[String])) }
-        attr_accessor :expand
-        # Simulated data for the interac_present payment method.
-        sig {
-          returns(T.nilable(::Stripe::Terminal::Reader::PresentPaymentMethodParams::InteracPresent))
-         }
-        attr_accessor :interac_present
-        # Simulated payment type.
-        sig { returns(T.nilable(String)) }
-        attr_accessor :type
-        sig {
-          params(amount_tip: T.nilable(Integer), card_present: T.nilable(::Stripe::Terminal::Reader::PresentPaymentMethodParams::CardPresent), expand: T.nilable(T::Array[String]), interac_present: T.nilable(::Stripe::Terminal::Reader::PresentPaymentMethodParams::InteracPresent), type: T.nilable(String)).void
-         }
-        def initialize(
-          amount_tip: nil,
-          card_present: nil,
-          expand: nil,
-          interac_present: nil,
-          type: nil
-        ); end
-      end
-      # Cancels the current reader action.
-      sig {
-        params(params: T.any(::Stripe::Terminal::Reader::CancelActionParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::Terminal::Reader)
-       }
-      def cancel_action(params = {}, opts = {}); end
-
-      # Cancels the current reader action.
-      sig {
-        params(reader: String, params: T.any(::Stripe::Terminal::Reader::CancelActionParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::Terminal::Reader)
-       }
-      def self.cancel_action(reader, params = {}, opts = {}); end
-
-      # Creates a new Reader object.
-      sig {
-        params(params: T.any(::Stripe::Terminal::Reader::CreateParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::Terminal::Reader)
-       }
-      def self.create(params = {}, opts = {}); end
-
-      # Deletes a Reader object.
-      sig {
-        params(reader: String, params: T.any(::Stripe::Terminal::Reader::DeleteParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::Terminal::Reader)
-       }
-      def self.delete(reader, params = {}, opts = {}); end
-
-      # Deletes a Reader object.
-      sig {
-        params(params: T.any(::Stripe::Terminal::Reader::DeleteParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::Terminal::Reader)
-       }
-      def delete(params = {}, opts = {}); end
-
-      # Returns a list of Reader objects.
-      sig {
-        params(params: T.any(::Stripe::Terminal::Reader::ListParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::ListObject)
-       }
-      def self.list(params = {}, opts = {}); end
-
-      # Initiates a payment flow on a Reader.
-      sig {
-        params(params: T.any(::Stripe::Terminal::Reader::ProcessPaymentIntentParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::Terminal::Reader)
-       }
-      def process_payment_intent(params = {}, opts = {}); end
-
-      # Initiates a payment flow on a Reader.
-      sig {
-        params(reader: String, params: T.any(::Stripe::Terminal::Reader::ProcessPaymentIntentParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::Terminal::Reader)
-       }
-      def self.process_payment_intent(reader, params = {}, opts = {}); end
-
-      # Initiates a setup intent flow on a Reader.
-      sig {
-        params(params: T.any(::Stripe::Terminal::Reader::ProcessSetupIntentParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::Terminal::Reader)
-       }
-      def process_setup_intent(params = {}, opts = {}); end
-
-      # Initiates a setup intent flow on a Reader.
-      sig {
-        params(reader: String, params: T.any(::Stripe::Terminal::Reader::ProcessSetupIntentParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::Terminal::Reader)
-       }
-      def self.process_setup_intent(reader, params = {}, opts = {}); end
-
-      # Initiates a refund on a Reader
-      sig {
-        params(params: T.any(::Stripe::Terminal::Reader::RefundPaymentParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::Terminal::Reader)
-       }
-      def refund_payment(params = {}, opts = {}); end
-
-      # Initiates a refund on a Reader
-      sig {
-        params(reader: String, params: T.any(::Stripe::Terminal::Reader::RefundPaymentParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::Terminal::Reader)
-       }
-      def self.refund_payment(reader, params = {}, opts = {}); end
-
-      # Sets reader display to show cart details.
-      sig {
-        params(params: T.any(::Stripe::Terminal::Reader::SetReaderDisplayParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::Terminal::Reader)
-       }
-      def set_reader_display(params = {}, opts = {}); end
-
-      # Sets reader display to show cart details.
-      sig {
-        params(reader: String, params: T.any(::Stripe::Terminal::Reader::SetReaderDisplayParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::Terminal::Reader)
-       }
-      def self.set_reader_display(reader, params = {}, opts = {}); end
-
-      # Updates a Reader object by setting the values of the parameters passed. Any parameters not provided will be left unchanged.
-      sig {
-        params(reader: String, params: T.any(::Stripe::Terminal::Reader::UpdateParams, T::Hash[T.untyped, T.untyped]), opts: T.untyped).returns(Stripe::Terminal::Reader)
-       }
-      def self.update(reader, params = {}, opts = {}); end
-    end
-  end
-end