stripe 14.0.0 → 14.1.0.pre.beta.1

data/lib/stripe/resources/setup_intent.rb

@@ -237,6 +237,31 @@ module Stripe
       class Paypal < Stripe::StripeObject
         # The PayPal Billing Agreement ID (BAID). This is an ID generated by PayPal which represents the mandate between the merchant and the customer.
         attr_reader :billing_agreement_id
+        # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
+        attr_reader :currency
+        # The Stripe connected account IDs of the sellers on the platform for this transaction (optional). Only allowed when [separate charges and transfers](https://stripe.com/docs/connect/separate-charges-and-transfers) are used.
+        attr_reader :subsellers
+      end
+
+      class Payto < Stripe::StripeObject
+        class MandateOptions < Stripe::StripeObject
+          # Amount that will be collected. It is required when `amount_type` is `fixed`.
+          attr_reader :amount
+          # The type of amount that will be collected. The amount charged must be exact or up to the value of `amount` param for `fixed` or `maximum` type respectively.
+          attr_reader :amount_type
+          # Date, in YYYY-MM-DD format, after which payments will not be collected. Defaults to no end date.
+          attr_reader :end_date
+          # The periodicity at which payments will be collected.
+          attr_reader :payment_schedule
+          # The number of payments that will be made during a payment period. Defaults to 1 except for when `payment_schedule` is `adhoc`. In that case, it defaults to no limit.
+          attr_reader :payments_per_period
+          # The purpose for which payments are made. Defaults to retail.
+          attr_reader :purpose
+          # Date, in YYYY-MM-DD format, from which payments will be collected. Defaults to confirmation time.
+          attr_reader :start_date
+        end
+        # Attribute for field mandate_options
+        attr_reader :mandate_options
       end
 
       class SepaDebit < Stripe::StripeObject
@@ -253,9 +278,18 @@ module Stripe
           class Filters < Stripe::StripeObject
             # The account subcategories to use to filter for possible accounts to link. Valid subcategories are `checking` and `savings`.
             attr_reader :account_subcategories
+            # The institution to use to filter for possible accounts to link.
+            attr_reader :institution
+          end
+
+          class ManualEntry < Stripe::StripeObject
+            # Settings for configuring manual entry of account details.
+            attr_reader :mode
           end
           # Attribute for field filters
           attr_reader :filters
+          # Attribute for field manual_entry
+          attr_reader :manual_entry
           # The list of permissions to request. The `payment_method` permission must be included.
           attr_reader :permissions
           # Data features requested to be retrieved upon account creation.
@@ -289,6 +323,8 @@ module Stripe
       attr_reader :link
       # Attribute for field paypal
       attr_reader :paypal
+      # Attribute for field payto
+      attr_reader :payto
       # Attribute for field sepa_debit
       attr_reader :sepa_debit
       # Attribute for field us_bank_account
@@ -321,6 +357,8 @@ module Stripe
       attr_accessor :created
       # Only return SetupIntents for the customer specified by this customer ID.
       attr_accessor :customer
+      # Only return SetupIntents for the account specified by this customer ID.
+      attr_accessor :customer_account
       # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
       attr_accessor :ending_before
       # Specifies which fields in the response should be expanded.
@@ -336,6 +374,7 @@ module Stripe
         attach_to_self: nil,
         created: nil,
         customer: nil,
+        customer_account: nil,
         ending_before: nil,
         expand: nil,
         limit: nil,
@@ -345,6 +384,7 @@ module Stripe
         @attach_to_self = attach_to_self
         @created = created
         @customer = customer
+        @customer_account = customer_account
         @ending_before = ending_before
         @expand = expand
         @limit = limit
@@ -559,9 +599,21 @@ module Stripe
         class Giropay < Stripe::RequestParams
         end
 
+        class Gopay < Stripe::RequestParams
+        end
+
         class Grabpay < Stripe::RequestParams
         end
 
+        class IdBankTransfer < Stripe::RequestParams
+          # Bank where the account is held.
+          attr_accessor :bank
+
+          def initialize(bank: nil)
+            @bank = bank
+          end
+        end
+
         class Ideal < Stripe::RequestParams
           # The customer's bank. Only use this parameter for existing customers. Don't use it for new customers.
           attr_accessor :bank
@@ -609,6 +661,9 @@ module Stripe
         class Link < Stripe::RequestParams
         end
 
+        class MbWay < Stripe::RequestParams
+        end
+
         class Mobilepay < Stripe::RequestParams
         end
 
@@ -679,12 +734,30 @@ module Stripe
         class Paypal < Stripe::RequestParams
         end
 
+        class Payto < Stripe::RequestParams
+          # The account number for the bank account.
+          attr_accessor :account_number
+          # Bank-State-Branch number of the bank account.
+          attr_accessor :bsb_number
+          # The PayID alias for the bank account.
+          attr_accessor :pay_id
+
+          def initialize(account_number: nil, bsb_number: nil, pay_id: nil)
+            @account_number = account_number
+            @bsb_number = bsb_number
+            @pay_id = pay_id
+          end
+        end
+
         class Pix < Stripe::RequestParams
         end
 
         class Promptpay < Stripe::RequestParams
         end
 
+        class Qris < Stripe::RequestParams
+        end
+
         class RadarOptions < Stripe::RequestParams
           # A [Radar Session](https://stripe.com/docs/radar/radar-session) is a snapshot of the browser metadata and device details that help Radar make more accurate predictions on your payments.
           attr_accessor :session
@@ -694,6 +767,29 @@ module Stripe
           end
         end
 
+        class Rechnung < Stripe::RequestParams
+          class Dob < Stripe::RequestParams
+            # The day of birth, between 1 and 31.
+            attr_accessor :day
+            # The month of birth, between 1 and 12.
+            attr_accessor :month
+            # The four-digit year of birth.
+            attr_accessor :year
+
+            def initialize(day: nil, month: nil, year: nil)
+              @day = day
+              @month = month
+              @year = year
+            end
+          end
+          # Customer's date of birth
+          attr_accessor :dob
+
+          def initialize(dob: nil)
+            @dob = dob
+          end
+        end
+
         class RevolutPay < Stripe::RequestParams
         end
 
@@ -712,6 +808,9 @@ module Stripe
           end
         end
 
+        class Shopeepay < Stripe::RequestParams
+        end
+
         class Sofort < Stripe::RequestParams
           # Two-letter ISO code representing the country the bank account is located in.
           attr_accessor :country
@@ -721,6 +820,18 @@ module Stripe
           end
         end
 
+        class StripeBalance < Stripe::RequestParams
+          # The connected account ID whose Stripe balance to use as the source of payment
+          attr_accessor :account
+          # The [source_type](https://docs.stripe.com/api/balance/balance_object#balance_object-available-source_types) of the balance
+          attr_accessor :source_type
+
+          def initialize(account: nil, source_type: nil)
+            @account = account
+            @source_type = source_type
+          end
+        end
+
         class Swish < Stripe::RequestParams
         end
 
@@ -797,8 +908,12 @@ module Stripe
         attr_accessor :fpx
         # If this is a `giropay` PaymentMethod, this hash contains details about the Giropay payment method.
         attr_accessor :giropay
+        # If this is a Gopay PaymentMethod, this hash contains details about the Gopay payment method.
+        attr_accessor :gopay
         # If this is a `grabpay` PaymentMethod, this hash contains details about the GrabPay payment method.
         attr_accessor :grabpay
+        # If this is an `IdBankTransfer` PaymentMethod, this hash contains details about the IdBankTransfer payment method.
+        attr_accessor :id_bank_transfer
         # If this is an `ideal` PaymentMethod, this hash contains details about the iDEAL payment method.
         attr_accessor :ideal
         # If this is an `interac_present` PaymentMethod, this hash contains details about the Interac Present payment method.
@@ -813,6 +928,8 @@ module Stripe
         attr_accessor :kr_card
         # If this is an `Link` PaymentMethod, this hash contains details about the Link payment method.
         attr_accessor :link
+        # If this is a MB WAY PaymentMethod, this hash contains details about the MB WAY payment method.
+        attr_accessor :mb_way
         # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
         attr_accessor :metadata
         # If this is a `mobilepay` PaymentMethod, this hash contains details about the MobilePay payment method.
@@ -835,12 +952,18 @@ module Stripe
         attr_accessor :paynow
         # If this is a `paypal` PaymentMethod, this hash contains details about the PayPal payment method.
         attr_accessor :paypal
+        # If this is a `payto` PaymentMethod, this hash contains details about the PayTo payment method.
+        attr_accessor :payto
         # If this is a `pix` PaymentMethod, this hash contains details about the Pix payment method.
         attr_accessor :pix
         # If this is a `promptpay` PaymentMethod, this hash contains details about the PromptPay payment method.
         attr_accessor :promptpay
+        # If this is a `qris` PaymentMethod, this hash contains details about the QRIS payment method.
+        attr_accessor :qris
         # Options to configure Radar. See [Radar Session](https://stripe.com/docs/radar/radar-session) for more information.
         attr_accessor :radar_options
+        # If this is a `rechnung` PaymentMethod, this hash contains details about the Rechnung payment method.
+        attr_accessor :rechnung
         # If this is a `Revolut Pay` PaymentMethod, this hash contains details about the Revolut Pay payment method.
         attr_accessor :revolut_pay
         # If this is a `samsung_pay` PaymentMethod, this hash contains details about the SamsungPay payment method.
@@ -849,8 +972,12 @@ module Stripe
         attr_accessor :satispay
         # If this is a `sepa_debit` PaymentMethod, this hash contains details about the SEPA debit bank account.
         attr_accessor :sepa_debit
+        # If this is a Shopeepay PaymentMethod, this hash contains details about the Shopeepay payment method.
+        attr_accessor :shopeepay
         # If this is a `sofort` PaymentMethod, this hash contains details about the SOFORT payment method.
         attr_accessor :sofort
+        # This hash contains details about the Stripe balance payment method.
+        attr_accessor :stripe_balance
         # If this is a `swish` PaymentMethod, this hash contains details about the Swish payment method.
         attr_accessor :swish
         # If this is a TWINT PaymentMethod, this hash contains details about the TWINT payment method.
@@ -884,7 +1011,9 @@ module Stripe
           eps: nil,
           fpx: nil,
           giropay: nil,
+          gopay: nil,
           grabpay: nil,
+          id_bank_transfer: nil,
           ideal: nil,
           interac_present: nil,
           kakao_pay: nil,
@@ -892,6 +1021,7 @@ module Stripe
           konbini: nil,
           kr_card: nil,
           link: nil,
+          mb_way: nil,
           metadata: nil,
           mobilepay: nil,
           multibanco: nil,
@@ -903,14 +1033,19 @@ module Stripe
           payco: nil,
           paynow: nil,
           paypal: nil,
+          payto: nil,
           pix: nil,
           promptpay: nil,
+          qris: nil,
           radar_options: nil,
+          rechnung: nil,
           revolut_pay: nil,
           samsung_pay: nil,
           satispay: nil,
           sepa_debit: nil,
+          shopeepay: nil,
           sofort: nil,
+          stripe_balance: nil,
           swish: nil,
           twint: nil,
           type: nil,
@@ -937,7 +1072,9 @@ module Stripe
           @eps = eps
           @fpx = fpx
           @giropay = giropay
+          @gopay = gopay
           @grabpay = grabpay
+          @id_bank_transfer = id_bank_transfer
           @ideal = ideal
           @interac_present = interac_present
           @kakao_pay = kakao_pay
@@ -945,6 +1082,7 @@ module Stripe
           @konbini = konbini
           @kr_card = kr_card
           @link = link
+          @mb_way = mb_way
           @metadata = metadata
           @mobilepay = mobilepay
           @multibanco = multibanco
@@ -956,14 +1094,19 @@ module Stripe
           @payco = payco
           @paynow = paynow
           @paypal = paypal
+          @payto = payto
           @pix = pix
           @promptpay = promptpay
+          @qris = qris
           @radar_options = radar_options
+          @rechnung = rechnung
           @revolut_pay = revolut_pay
           @samsung_pay = samsung_pay
           @satispay = satispay
           @sepa_debit = sepa_debit
+          @shopeepay = shopeepay
           @sofort = sofort
+          @stripe_balance = stripe_balance
           @swish = swish
           @twint = twint
           @type = type
@@ -1199,9 +1342,58 @@ module Stripe
         class Paypal < Stripe::RequestParams
           # The PayPal Billing Agreement ID (BAID). This is an ID generated by PayPal which represents the mandate between the merchant and the customer.
           attr_accessor :billing_agreement_id
+          # Attribute for param field currency
+          attr_accessor :currency
+          # The Stripe connected account IDs of the sellers on the platform for this transaction (optional). Only allowed when [separate charges and transfers](https://stripe.com/docs/connect/separate-charges-and-transfers) are used.
+          attr_accessor :subsellers
 
-          def initialize(billing_agreement_id: nil)
+          def initialize(billing_agreement_id: nil, currency: nil, subsellers: nil)
             @billing_agreement_id = billing_agreement_id
+            @currency = currency
+            @subsellers = subsellers
+          end
+        end
+
+        class Payto < Stripe::RequestParams
+          class MandateOptions < Stripe::RequestParams
+            # Amount that will be collected. It is required when `amount_type` is `fixed`.
+            attr_accessor :amount
+            # The type of amount that will be collected. The amount charged must be exact or up to the value of `amount` param for `fixed` or `maximum` type respectively.
+            attr_accessor :amount_type
+            # Date, in YYYY-MM-DD format, after which payments will not be collected. Defaults to no end date.
+            attr_accessor :end_date
+            # The periodicity at which payments will be collected.
+            attr_accessor :payment_schedule
+            # The number of payments that will be made during a payment period. Defaults to 1 except for when `payment_schedule` is `adhoc`. In that case, it defaults to no limit.
+            attr_accessor :payments_per_period
+            # The purpose for which payments are made. Defaults to retail.
+            attr_accessor :purpose
+            # Date, in YYYY-MM-DD format, from which payments will be collected. Defaults to confirmation time.
+            attr_accessor :start_date
+
+            def initialize(
+              amount: nil,
+              amount_type: nil,
+              end_date: nil,
+              payment_schedule: nil,
+              payments_per_period: nil,
+              purpose: nil,
+              start_date: nil
+            )
+              @amount = amount
+              @amount_type = amount_type
+              @end_date = end_date
+              @payment_schedule = payment_schedule
+              @payments_per_period = payments_per_period
+              @purpose = purpose
+              @start_date = start_date
+            end
+          end
+          # Additional fields for Mandate creation.
+          attr_accessor :mandate_options
+
+          def initialize(mandate_options: nil)
+            @mandate_options = mandate_options
           end
         end
 
@@ -1227,13 +1419,27 @@ module Stripe
             class Filters < Stripe::RequestParams
               # The account subcategories to use to filter for selectable accounts. Valid subcategories are `checking` and `savings`.
               attr_accessor :account_subcategories
+              # ID of the institution to use to filter for selectable accounts.
+              attr_accessor :institution
 
-              def initialize(account_subcategories: nil)
+              def initialize(account_subcategories: nil, institution: nil)
                 @account_subcategories = account_subcategories
+                @institution = institution
+              end
+            end
+
+            class ManualEntry < Stripe::RequestParams
+              # Settings for configuring manual entry of account details.
+              attr_accessor :mode
+
+              def initialize(mode: nil)
+                @mode = mode
               end
             end
             # Provide filters for the linked accounts that the customer can select for the payment method.
             attr_accessor :filters
+            # Customize manual entry behavior
+            attr_accessor :manual_entry
             # The list of permissions to request. If this parameter is passed, the `payment_method` permission must be included. Valid permissions include: `balances`, `ownership`, `payment_method`, and `transactions`.
             attr_accessor :permissions
             # List of data features that you would like to retrieve upon account creation.
@@ -1241,8 +1447,15 @@ module Stripe
             # For webview integrations only. Upon completing OAuth login in the native browser, the user will be redirected to this URL to return to your app.
             attr_accessor :return_url
 
-            def initialize(filters: nil, permissions: nil, prefetch: nil, return_url: nil)
+            def initialize(
+              filters: nil,
+              manual_entry: nil,
+              permissions: nil,
+              prefetch: nil,
+              return_url: nil
+            )
               @filters = filters
+              @manual_entry = manual_entry
               @permissions = permissions
               @prefetch = prefetch
               @return_url = return_url
@@ -1301,6 +1514,8 @@ module Stripe
         attr_accessor :link
         # If this is a `paypal` PaymentMethod, this sub-hash contains details about the PayPal payment method options.
         attr_accessor :paypal
+        # If this is a `payto` SetupIntent, this sub-hash contains details about the PayTo payment method options.
+        attr_accessor :payto
         # If this is a `sepa_debit` SetupIntent, this sub-hash contains details about the SEPA Debit payment method options.
         attr_accessor :sepa_debit
         # If this is a `us_bank_account` SetupIntent, this sub-hash contains details about the US bank account payment method options.
@@ -1314,6 +1529,7 @@ module Stripe
           card_present: nil,
           link: nil,
           paypal: nil,
+          payto: nil,
           sepa_debit: nil,
           us_bank_account: nil
         )
@@ -1324,6 +1540,7 @@ module Stripe
           @card_present = card_present
           @link = link
           @paypal = paypal
+          @payto = payto
           @sepa_debit = sepa_debit
           @us_bank_account = us_bank_account
         end
@@ -1356,6 +1573,10 @@ module Stripe
       #
       # If present, the SetupIntent's payment method will be attached to the Customer on successful setup. Payment methods attached to other Customers cannot be used with this SetupIntent.
       attr_accessor :customer
+      # ID of the Account this SetupIntent belongs to, if one exists.
+      #
+      # If present, the SetupIntent's payment method will be attached to the Account on successful setup. Payment methods attached to other Accounts cannot be used with this SetupIntent.
+      attr_accessor :customer_account
       # An arbitrary string attached to the object. Often useful for displaying to users.
       attr_accessor :description
       # Specifies which fields in the response should be expanded.
@@ -1398,6 +1619,7 @@ module Stripe
         confirm: nil,
         confirmation_token: nil,
         customer: nil,
+        customer_account: nil,
         description: nil,
         expand: nil,
         flow_directions: nil,
@@ -1419,6 +1641,7 @@ module Stripe
         @confirm = confirm
         @confirmation_token = confirmation_token
         @customer = customer
+        @customer_account = customer_account
         @description = description
         @expand = expand
         @flow_directions = flow_directions
@@ -1589,9 +1812,21 @@ module Stripe
         class Giropay < Stripe::RequestParams
         end
 
+        class Gopay < Stripe::RequestParams
+        end
+
         class Grabpay < Stripe::RequestParams
         end
 
+        class IdBankTransfer < Stripe::RequestParams
+          # Bank where the account is held.
+          attr_accessor :bank
+
+          def initialize(bank: nil)
+            @bank = bank
+          end
+        end
+
         class Ideal < Stripe::RequestParams
           # The customer's bank. Only use this parameter for existing customers. Don't use it for new customers.
           attr_accessor :bank
@@ -1639,6 +1874,9 @@ module Stripe
         class Link < Stripe::RequestParams
         end
 
+        class MbWay < Stripe::RequestParams
+        end
+
         class Mobilepay < Stripe::RequestParams
         end
 
@@ -1709,12 +1947,30 @@ module Stripe
         class Paypal < Stripe::RequestParams
         end
 
+        class Payto < Stripe::RequestParams
+          # The account number for the bank account.
+          attr_accessor :account_number
+          # Bank-State-Branch number of the bank account.
+          attr_accessor :bsb_number
+          # The PayID alias for the bank account.
+          attr_accessor :pay_id
+
+          def initialize(account_number: nil, bsb_number: nil, pay_id: nil)
+            @account_number = account_number
+            @bsb_number = bsb_number
+            @pay_id = pay_id
+          end
+        end
+
         class Pix < Stripe::RequestParams
         end
 
         class Promptpay < Stripe::RequestParams
         end
 
+        class Qris < Stripe::RequestParams
+        end
+
         class RadarOptions < Stripe::RequestParams
           # A [Radar Session](https://stripe.com/docs/radar/radar-session) is a snapshot of the browser metadata and device details that help Radar make more accurate predictions on your payments.
           attr_accessor :session
@@ -1724,6 +1980,29 @@ module Stripe
           end
         end
 
+        class Rechnung < Stripe::RequestParams
+          class Dob < Stripe::RequestParams
+            # The day of birth, between 1 and 31.
+            attr_accessor :day
+            # The month of birth, between 1 and 12.
+            attr_accessor :month
+            # The four-digit year of birth.
+            attr_accessor :year
+
+            def initialize(day: nil, month: nil, year: nil)
+              @day = day
+              @month = month
+              @year = year
+            end
+          end
+          # Customer's date of birth
+          attr_accessor :dob
+
+          def initialize(dob: nil)
+            @dob = dob
+          end
+        end
+
         class RevolutPay < Stripe::RequestParams
         end
 
@@ -1742,6 +2021,9 @@ module Stripe
           end
         end
 
+        class Shopeepay < Stripe::RequestParams
+        end
+
         class Sofort < Stripe::RequestParams
           # Two-letter ISO code representing the country the bank account is located in.
           attr_accessor :country
@@ -1751,6 +2033,18 @@ module Stripe
           end
         end
 
+        class StripeBalance < Stripe::RequestParams
+          # The connected account ID whose Stripe balance to use as the source of payment
+          attr_accessor :account
+          # The [source_type](https://docs.stripe.com/api/balance/balance_object#balance_object-available-source_types) of the balance
+          attr_accessor :source_type
+
+          def initialize(account: nil, source_type: nil)
+            @account = account
+            @source_type = source_type
+          end
+        end
+
         class Swish < Stripe::RequestParams
         end
 
@@ -1827,8 +2121,12 @@ module Stripe
         attr_accessor :fpx
         # If this is a `giropay` PaymentMethod, this hash contains details about the Giropay payment method.
         attr_accessor :giropay
+        # If this is a Gopay PaymentMethod, this hash contains details about the Gopay payment method.
+        attr_accessor :gopay
         # If this is a `grabpay` PaymentMethod, this hash contains details about the GrabPay payment method.
         attr_accessor :grabpay
+        # If this is an `IdBankTransfer` PaymentMethod, this hash contains details about the IdBankTransfer payment method.
+        attr_accessor :id_bank_transfer
         # If this is an `ideal` PaymentMethod, this hash contains details about the iDEAL payment method.
         attr_accessor :ideal
         # If this is an `interac_present` PaymentMethod, this hash contains details about the Interac Present payment method.
@@ -1843,6 +2141,8 @@ module Stripe
         attr_accessor :kr_card
         # If this is an `Link` PaymentMethod, this hash contains details about the Link payment method.
         attr_accessor :link
+        # If this is a MB WAY PaymentMethod, this hash contains details about the MB WAY payment method.
+        attr_accessor :mb_way
         # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
         attr_accessor :metadata
         # If this is a `mobilepay` PaymentMethod, this hash contains details about the MobilePay payment method.
@@ -1865,12 +2165,18 @@ module Stripe
         attr_accessor :paynow
         # If this is a `paypal` PaymentMethod, this hash contains details about the PayPal payment method.
         attr_accessor :paypal
+        # If this is a `payto` PaymentMethod, this hash contains details about the PayTo payment method.
+        attr_accessor :payto
         # If this is a `pix` PaymentMethod, this hash contains details about the Pix payment method.
         attr_accessor :pix
         # If this is a `promptpay` PaymentMethod, this hash contains details about the PromptPay payment method.
         attr_accessor :promptpay
+        # If this is a `qris` PaymentMethod, this hash contains details about the QRIS payment method.
+        attr_accessor :qris
         # Options to configure Radar. See [Radar Session](https://stripe.com/docs/radar/radar-session) for more information.
         attr_accessor :radar_options
+        # If this is a `rechnung` PaymentMethod, this hash contains details about the Rechnung payment method.
+        attr_accessor :rechnung
         # If this is a `Revolut Pay` PaymentMethod, this hash contains details about the Revolut Pay payment method.
         attr_accessor :revolut_pay
         # If this is a `samsung_pay` PaymentMethod, this hash contains details about the SamsungPay payment method.
@@ -1879,8 +2185,12 @@ module Stripe
         attr_accessor :satispay
         # If this is a `sepa_debit` PaymentMethod, this hash contains details about the SEPA debit bank account.
         attr_accessor :sepa_debit
+        # If this is a Shopeepay PaymentMethod, this hash contains details about the Shopeepay payment method.
+        attr_accessor :shopeepay
         # If this is a `sofort` PaymentMethod, this hash contains details about the SOFORT payment method.
         attr_accessor :sofort
+        # This hash contains details about the Stripe balance payment method.
+        attr_accessor :stripe_balance
         # If this is a `swish` PaymentMethod, this hash contains details about the Swish payment method.
         attr_accessor :swish
         # If this is a TWINT PaymentMethod, this hash contains details about the TWINT payment method.
@@ -1914,7 +2224,9 @@ module Stripe
           eps: nil,
           fpx: nil,
           giropay: nil,
+          gopay: nil,
           grabpay: nil,
+          id_bank_transfer: nil,
           ideal: nil,
           interac_present: nil,
           kakao_pay: nil,
@@ -1922,6 +2234,7 @@ module Stripe
           konbini: nil,
           kr_card: nil,
           link: nil,
+          mb_way: nil,
           metadata: nil,
           mobilepay: nil,
           multibanco: nil,
@@ -1933,14 +2246,19 @@ module Stripe
           payco: nil,
           paynow: nil,
           paypal: nil,
+          payto: nil,
           pix: nil,
           promptpay: nil,
+          qris: nil,
           radar_options: nil,
+          rechnung: nil,
           revolut_pay: nil,
           samsung_pay: nil,
           satispay: nil,
           sepa_debit: nil,
+          shopeepay: nil,
           sofort: nil,
+          stripe_balance: nil,
           swish: nil,
           twint: nil,
           type: nil,
@@ -1967,7 +2285,9 @@ module Stripe
           @eps = eps
           @fpx = fpx
           @giropay = giropay
+          @gopay = gopay
           @grabpay = grabpay
+          @id_bank_transfer = id_bank_transfer
           @ideal = ideal
           @interac_present = interac_present
           @kakao_pay = kakao_pay
@@ -1975,6 +2295,7 @@ module Stripe
           @konbini = konbini
           @kr_card = kr_card
           @link = link
+          @mb_way = mb_way
           @metadata = metadata
           @mobilepay = mobilepay
           @multibanco = multibanco
@@ -1986,14 +2307,19 @@ module Stripe
           @payco = payco
           @paynow = paynow
           @paypal = paypal
+          @payto = payto
           @pix = pix
           @promptpay = promptpay
+          @qris = qris
           @radar_options = radar_options
+          @rechnung = rechnung
           @revolut_pay = revolut_pay
           @samsung_pay = samsung_pay
           @satispay = satispay
           @sepa_debit = sepa_debit
+          @shopeepay = shopeepay
           @sofort = sofort
+          @stripe_balance = stripe_balance
           @swish = swish
           @twint = twint
           @type = type
@@ -2229,9 +2555,58 @@ module Stripe
         class Paypal < Stripe::RequestParams
           # The PayPal Billing Agreement ID (BAID). This is an ID generated by PayPal which represents the mandate between the merchant and the customer.
           attr_accessor :billing_agreement_id
+          # Attribute for param field currency
+          attr_accessor :currency
+          # The Stripe connected account IDs of the sellers on the platform for this transaction (optional). Only allowed when [separate charges and transfers](https://stripe.com/docs/connect/separate-charges-and-transfers) are used.
+          attr_accessor :subsellers
 
-          def initialize(billing_agreement_id: nil)
+          def initialize(billing_agreement_id: nil, currency: nil, subsellers: nil)
             @billing_agreement_id = billing_agreement_id
+            @currency = currency
+            @subsellers = subsellers
+          end
+        end
+
+        class Payto < Stripe::RequestParams
+          class MandateOptions < Stripe::RequestParams
+            # Amount that will be collected. It is required when `amount_type` is `fixed`.
+            attr_accessor :amount
+            # The type of amount that will be collected. The amount charged must be exact or up to the value of `amount` param for `fixed` or `maximum` type respectively.
+            attr_accessor :amount_type
+            # Date, in YYYY-MM-DD format, after which payments will not be collected. Defaults to no end date.
+            attr_accessor :end_date
+            # The periodicity at which payments will be collected.
+            attr_accessor :payment_schedule
+            # The number of payments that will be made during a payment period. Defaults to 1 except for when `payment_schedule` is `adhoc`. In that case, it defaults to no limit.
+            attr_accessor :payments_per_period
+            # The purpose for which payments are made. Defaults to retail.
+            attr_accessor :purpose
+            # Date, in YYYY-MM-DD format, from which payments will be collected. Defaults to confirmation time.
+            attr_accessor :start_date
+
+            def initialize(
+              amount: nil,
+              amount_type: nil,
+              end_date: nil,
+              payment_schedule: nil,
+              payments_per_period: nil,
+              purpose: nil,
+              start_date: nil
+            )
+              @amount = amount
+              @amount_type = amount_type
+              @end_date = end_date
+              @payment_schedule = payment_schedule
+              @payments_per_period = payments_per_period
+              @purpose = purpose
+              @start_date = start_date
+            end
+          end
+          # Additional fields for Mandate creation.
+          attr_accessor :mandate_options
+
+          def initialize(mandate_options: nil)
+            @mandate_options = mandate_options
           end
         end
 
@@ -2257,13 +2632,27 @@ module Stripe
             class Filters < Stripe::RequestParams
               # The account subcategories to use to filter for selectable accounts. Valid subcategories are `checking` and `savings`.
               attr_accessor :account_subcategories
+              # ID of the institution to use to filter for selectable accounts.
+              attr_accessor :institution
 
-              def initialize(account_subcategories: nil)
+              def initialize(account_subcategories: nil, institution: nil)
                 @account_subcategories = account_subcategories
+                @institution = institution
+              end
+            end
+
+            class ManualEntry < Stripe::RequestParams
+              # Settings for configuring manual entry of account details.
+              attr_accessor :mode
+
+              def initialize(mode: nil)
+                @mode = mode
               end
             end
             # Provide filters for the linked accounts that the customer can select for the payment method.
             attr_accessor :filters
+            # Customize manual entry behavior
+            attr_accessor :manual_entry
             # The list of permissions to request. If this parameter is passed, the `payment_method` permission must be included. Valid permissions include: `balances`, `ownership`, `payment_method`, and `transactions`.
             attr_accessor :permissions
             # List of data features that you would like to retrieve upon account creation.
@@ -2271,8 +2660,15 @@ module Stripe
             # For webview integrations only. Upon completing OAuth login in the native browser, the user will be redirected to this URL to return to your app.
             attr_accessor :return_url
 
-            def initialize(filters: nil, permissions: nil, prefetch: nil, return_url: nil)
+            def initialize(
+              filters: nil,
+              manual_entry: nil,
+              permissions: nil,
+              prefetch: nil,
+              return_url: nil
+            )
               @filters = filters
+              @manual_entry = manual_entry
               @permissions = permissions
               @prefetch = prefetch
               @return_url = return_url
@@ -2331,6 +2727,8 @@ module Stripe
         attr_accessor :link
         # If this is a `paypal` PaymentMethod, this sub-hash contains details about the PayPal payment method options.
         attr_accessor :paypal
+        # If this is a `payto` SetupIntent, this sub-hash contains details about the PayTo payment method options.
+        attr_accessor :payto
         # If this is a `sepa_debit` SetupIntent, this sub-hash contains details about the SEPA Debit payment method options.
         attr_accessor :sepa_debit
         # If this is a `us_bank_account` SetupIntent, this sub-hash contains details about the US bank account payment method options.
@@ -2344,6 +2742,7 @@ module Stripe
           card_present: nil,
           link: nil,
           paypal: nil,
+          payto: nil,
           sepa_debit: nil,
           us_bank_account: nil
         )
@@ -2354,6 +2753,7 @@ module Stripe
           @card_present = card_present
           @link = link
           @paypal = paypal
+          @payto = payto
           @sepa_debit = sepa_debit
           @us_bank_account = us_bank_account
         end
@@ -2366,6 +2766,10 @@ module Stripe
       #
       # If present, the SetupIntent's payment method will be attached to the Customer on successful setup. Payment methods attached to other Customers cannot be used with this SetupIntent.
       attr_accessor :customer
+      # ID of the Account this SetupIntent belongs to, if one exists.
+      #
+      # If present, the SetupIntent's payment method will be attached to the Account on successful setup. Payment methods attached to other Accounts cannot be used with this SetupIntent.
+      attr_accessor :customer_account
       # An arbitrary string attached to the object. Often useful for displaying to users.
       attr_accessor :description
       # Specifies which fields in the response should be expanded.
@@ -2391,6 +2795,7 @@ module Stripe
       def initialize(
         attach_to_self: nil,
         customer: nil,
+        customer_account: nil,
         description: nil,
         expand: nil,
         flow_directions: nil,
@@ -2403,6 +2808,7 @@ module Stripe
       )
         @attach_to_self = attach_to_self
         @customer = customer
+        @customer_account = customer_account
         @description = description
         @expand = expand
         @flow_directions = flow_directions
@@ -2619,9 +3025,21 @@ module Stripe
         class Giropay < Stripe::RequestParams
         end
 
+        class Gopay < Stripe::RequestParams
+        end
+
         class Grabpay < Stripe::RequestParams
         end
 
+        class IdBankTransfer < Stripe::RequestParams
+          # Bank where the account is held.
+          attr_accessor :bank
+
+          def initialize(bank: nil)
+            @bank = bank
+          end
+        end
+
         class Ideal < Stripe::RequestParams
           # The customer's bank. Only use this parameter for existing customers. Don't use it for new customers.
           attr_accessor :bank
@@ -2669,6 +3087,9 @@ module Stripe
         class Link < Stripe::RequestParams
         end
 
+        class MbWay < Stripe::RequestParams
+        end
+
         class Mobilepay < Stripe::RequestParams
         end
 
@@ -2739,12 +3160,30 @@ module Stripe
         class Paypal < Stripe::RequestParams
         end
 
+        class Payto < Stripe::RequestParams
+          # The account number for the bank account.
+          attr_accessor :account_number
+          # Bank-State-Branch number of the bank account.
+          attr_accessor :bsb_number
+          # The PayID alias for the bank account.
+          attr_accessor :pay_id
+
+          def initialize(account_number: nil, bsb_number: nil, pay_id: nil)
+            @account_number = account_number
+            @bsb_number = bsb_number
+            @pay_id = pay_id
+          end
+        end
+
         class Pix < Stripe::RequestParams
         end
 
         class Promptpay < Stripe::RequestParams
         end
 
+        class Qris < Stripe::RequestParams
+        end
+
         class RadarOptions < Stripe::RequestParams
           # A [Radar Session](https://stripe.com/docs/radar/radar-session) is a snapshot of the browser metadata and device details that help Radar make more accurate predictions on your payments.
           attr_accessor :session
@@ -2754,6 +3193,29 @@ module Stripe
           end
         end
 
+        class Rechnung < Stripe::RequestParams
+          class Dob < Stripe::RequestParams
+            # The day of birth, between 1 and 31.
+            attr_accessor :day
+            # The month of birth, between 1 and 12.
+            attr_accessor :month
+            # The four-digit year of birth.
+            attr_accessor :year
+
+            def initialize(day: nil, month: nil, year: nil)
+              @day = day
+              @month = month
+              @year = year
+            end
+          end
+          # Customer's date of birth
+          attr_accessor :dob
+
+          def initialize(dob: nil)
+            @dob = dob
+          end
+        end
+
         class RevolutPay < Stripe::RequestParams
         end
 
@@ -2772,6 +3234,9 @@ module Stripe
           end
         end
 
+        class Shopeepay < Stripe::RequestParams
+        end
+
         class Sofort < Stripe::RequestParams
           # Two-letter ISO code representing the country the bank account is located in.
           attr_accessor :country
@@ -2781,6 +3246,18 @@ module Stripe
           end
         end
 
+        class StripeBalance < Stripe::RequestParams
+          # The connected account ID whose Stripe balance to use as the source of payment
+          attr_accessor :account
+          # The [source_type](https://docs.stripe.com/api/balance/balance_object#balance_object-available-source_types) of the balance
+          attr_accessor :source_type
+
+          def initialize(account: nil, source_type: nil)
+            @account = account
+            @source_type = source_type
+          end
+        end
+
         class Swish < Stripe::RequestParams
         end
 
@@ -2857,8 +3334,12 @@ module Stripe
         attr_accessor :fpx
         # If this is a `giropay` PaymentMethod, this hash contains details about the Giropay payment method.
         attr_accessor :giropay
+        # If this is a Gopay PaymentMethod, this hash contains details about the Gopay payment method.
+        attr_accessor :gopay
         # If this is a `grabpay` PaymentMethod, this hash contains details about the GrabPay payment method.
         attr_accessor :grabpay
+        # If this is an `IdBankTransfer` PaymentMethod, this hash contains details about the IdBankTransfer payment method.
+        attr_accessor :id_bank_transfer
         # If this is an `ideal` PaymentMethod, this hash contains details about the iDEAL payment method.
         attr_accessor :ideal
         # If this is an `interac_present` PaymentMethod, this hash contains details about the Interac Present payment method.
@@ -2873,6 +3354,8 @@ module Stripe
         attr_accessor :kr_card
         # If this is an `Link` PaymentMethod, this hash contains details about the Link payment method.
         attr_accessor :link
+        # If this is a MB WAY PaymentMethod, this hash contains details about the MB WAY payment method.
+        attr_accessor :mb_way
         # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
         attr_accessor :metadata
         # If this is a `mobilepay` PaymentMethod, this hash contains details about the MobilePay payment method.
@@ -2895,12 +3378,18 @@ module Stripe
         attr_accessor :paynow
         # If this is a `paypal` PaymentMethod, this hash contains details about the PayPal payment method.
         attr_accessor :paypal
+        # If this is a `payto` PaymentMethod, this hash contains details about the PayTo payment method.
+        attr_accessor :payto
         # If this is a `pix` PaymentMethod, this hash contains details about the Pix payment method.
         attr_accessor :pix
         # If this is a `promptpay` PaymentMethod, this hash contains details about the PromptPay payment method.
         attr_accessor :promptpay
+        # If this is a `qris` PaymentMethod, this hash contains details about the QRIS payment method.
+        attr_accessor :qris
         # Options to configure Radar. See [Radar Session](https://stripe.com/docs/radar/radar-session) for more information.
         attr_accessor :radar_options
+        # If this is a `rechnung` PaymentMethod, this hash contains details about the Rechnung payment method.
+        attr_accessor :rechnung
         # If this is a `Revolut Pay` PaymentMethod, this hash contains details about the Revolut Pay payment method.
         attr_accessor :revolut_pay
         # If this is a `samsung_pay` PaymentMethod, this hash contains details about the SamsungPay payment method.
@@ -2909,8 +3398,12 @@ module Stripe
         attr_accessor :satispay
         # If this is a `sepa_debit` PaymentMethod, this hash contains details about the SEPA debit bank account.
         attr_accessor :sepa_debit
+        # If this is a Shopeepay PaymentMethod, this hash contains details about the Shopeepay payment method.
+        attr_accessor :shopeepay
         # If this is a `sofort` PaymentMethod, this hash contains details about the SOFORT payment method.
         attr_accessor :sofort
+        # This hash contains details about the Stripe balance payment method.
+        attr_accessor :stripe_balance
         # If this is a `swish` PaymentMethod, this hash contains details about the Swish payment method.
         attr_accessor :swish
         # If this is a TWINT PaymentMethod, this hash contains details about the TWINT payment method.
@@ -2944,7 +3437,9 @@ module Stripe
           eps: nil,
           fpx: nil,
           giropay: nil,
+          gopay: nil,
           grabpay: nil,
+          id_bank_transfer: nil,
           ideal: nil,
           interac_present: nil,
           kakao_pay: nil,
@@ -2952,6 +3447,7 @@ module Stripe
           konbini: nil,
           kr_card: nil,
           link: nil,
+          mb_way: nil,
           metadata: nil,
           mobilepay: nil,
           multibanco: nil,
@@ -2963,14 +3459,19 @@ module Stripe
           payco: nil,
           paynow: nil,
           paypal: nil,
+          payto: nil,
           pix: nil,
           promptpay: nil,
+          qris: nil,
           radar_options: nil,
+          rechnung: nil,
           revolut_pay: nil,
           samsung_pay: nil,
           satispay: nil,
           sepa_debit: nil,
+          shopeepay: nil,
           sofort: nil,
+          stripe_balance: nil,
           swish: nil,
           twint: nil,
           type: nil,
@@ -2997,7 +3498,9 @@ module Stripe
           @eps = eps
           @fpx = fpx
           @giropay = giropay
+          @gopay = gopay
           @grabpay = grabpay
+          @id_bank_transfer = id_bank_transfer
           @ideal = ideal
           @interac_present = interac_present
           @kakao_pay = kakao_pay
@@ -3005,6 +3508,7 @@ module Stripe
           @konbini = konbini
           @kr_card = kr_card
           @link = link
+          @mb_way = mb_way
           @metadata = metadata
           @mobilepay = mobilepay
           @multibanco = multibanco
@@ -3016,14 +3520,19 @@ module Stripe
           @payco = payco
           @paynow = paynow
           @paypal = paypal
+          @payto = payto
           @pix = pix
           @promptpay = promptpay
+          @qris = qris
           @radar_options = radar_options
+          @rechnung = rechnung
           @revolut_pay = revolut_pay
           @samsung_pay = samsung_pay
           @satispay = satispay
           @sepa_debit = sepa_debit
+          @shopeepay = shopeepay
           @sofort = sofort
+          @stripe_balance = stripe_balance
           @swish = swish
           @twint = twint
           @type = type
@@ -3259,9 +3768,58 @@ module Stripe
         class Paypal < Stripe::RequestParams
           # The PayPal Billing Agreement ID (BAID). This is an ID generated by PayPal which represents the mandate between the merchant and the customer.
           attr_accessor :billing_agreement_id
+          # Attribute for param field currency
+          attr_accessor :currency
+          # The Stripe connected account IDs of the sellers on the platform for this transaction (optional). Only allowed when [separate charges and transfers](https://stripe.com/docs/connect/separate-charges-and-transfers) are used.
+          attr_accessor :subsellers
 
-          def initialize(billing_agreement_id: nil)
+          def initialize(billing_agreement_id: nil, currency: nil, subsellers: nil)
             @billing_agreement_id = billing_agreement_id
+            @currency = currency
+            @subsellers = subsellers
+          end
+        end
+
+        class Payto < Stripe::RequestParams
+          class MandateOptions < Stripe::RequestParams
+            # Amount that will be collected. It is required when `amount_type` is `fixed`.
+            attr_accessor :amount
+            # The type of amount that will be collected. The amount charged must be exact or up to the value of `amount` param for `fixed` or `maximum` type respectively.
+            attr_accessor :amount_type
+            # Date, in YYYY-MM-DD format, after which payments will not be collected. Defaults to no end date.
+            attr_accessor :end_date
+            # The periodicity at which payments will be collected.
+            attr_accessor :payment_schedule
+            # The number of payments that will be made during a payment period. Defaults to 1 except for when `payment_schedule` is `adhoc`. In that case, it defaults to no limit.
+            attr_accessor :payments_per_period
+            # The purpose for which payments are made. Defaults to retail.
+            attr_accessor :purpose
+            # Date, in YYYY-MM-DD format, from which payments will be collected. Defaults to confirmation time.
+            attr_accessor :start_date
+
+            def initialize(
+              amount: nil,
+              amount_type: nil,
+              end_date: nil,
+              payment_schedule: nil,
+              payments_per_period: nil,
+              purpose: nil,
+              start_date: nil
+            )
+              @amount = amount
+              @amount_type = amount_type
+              @end_date = end_date
+              @payment_schedule = payment_schedule
+              @payments_per_period = payments_per_period
+              @purpose = purpose
+              @start_date = start_date
+            end
+          end
+          # Additional fields for Mandate creation.
+          attr_accessor :mandate_options
+
+          def initialize(mandate_options: nil)
+            @mandate_options = mandate_options
           end
         end
 
@@ -3287,13 +3845,27 @@ module Stripe
             class Filters < Stripe::RequestParams
               # The account subcategories to use to filter for selectable accounts. Valid subcategories are `checking` and `savings`.
               attr_accessor :account_subcategories
+              # ID of the institution to use to filter for selectable accounts.
+              attr_accessor :institution
 
-              def initialize(account_subcategories: nil)
+              def initialize(account_subcategories: nil, institution: nil)
                 @account_subcategories = account_subcategories
+                @institution = institution
+              end
+            end
+
+            class ManualEntry < Stripe::RequestParams
+              # Settings for configuring manual entry of account details.
+              attr_accessor :mode
+
+              def initialize(mode: nil)
+                @mode = mode
               end
             end
             # Provide filters for the linked accounts that the customer can select for the payment method.
             attr_accessor :filters
+            # Customize manual entry behavior
+            attr_accessor :manual_entry
             # The list of permissions to request. If this parameter is passed, the `payment_method` permission must be included. Valid permissions include: `balances`, `ownership`, `payment_method`, and `transactions`.
             attr_accessor :permissions
             # List of data features that you would like to retrieve upon account creation.
@@ -3301,8 +3873,15 @@ module Stripe
             # For webview integrations only. Upon completing OAuth login in the native browser, the user will be redirected to this URL to return to your app.
             attr_accessor :return_url
 
-            def initialize(filters: nil, permissions: nil, prefetch: nil, return_url: nil)
+            def initialize(
+              filters: nil,
+              manual_entry: nil,
+              permissions: nil,
+              prefetch: nil,
+              return_url: nil
+            )
               @filters = filters
+              @manual_entry = manual_entry
               @permissions = permissions
               @prefetch = prefetch
               @return_url = return_url
@@ -3361,6 +3940,8 @@ module Stripe
         attr_accessor :link
         # If this is a `paypal` PaymentMethod, this sub-hash contains details about the PayPal payment method options.
         attr_accessor :paypal
+        # If this is a `payto` SetupIntent, this sub-hash contains details about the PayTo payment method options.
+        attr_accessor :payto
         # If this is a `sepa_debit` SetupIntent, this sub-hash contains details about the SEPA Debit payment method options.
         attr_accessor :sepa_debit
         # If this is a `us_bank_account` SetupIntent, this sub-hash contains details about the US bank account payment method options.
@@ -3374,6 +3955,7 @@ module Stripe
           card_present: nil,
           link: nil,
           paypal: nil,
+          payto: nil,
           sepa_debit: nil,
           us_bank_account: nil
         )
@@ -3384,6 +3966,7 @@ module Stripe
           @card_present = card_present
           @link = link
           @paypal = paypal
+          @payto = payto
           @sepa_debit = sepa_debit
           @us_bank_account = us_bank_account
         end
@@ -3465,6 +4048,10 @@ module Stripe
     #
     # If present, the SetupIntent's payment method will be attached to the Customer on successful setup. Payment methods attached to other Customers cannot be used with this SetupIntent.
     attr_reader :customer
+    # ID of the Account this SetupIntent belongs to, if one exists.
+    #
+    # If present, the SetupIntent's payment method will be attached to the Account on successful setup. Payment methods attached to other Accounts cannot be used with this SetupIntent.
+    attr_reader :customer_account
     # An arbitrary string attached to the object. Often useful for displaying to users.
     attr_reader :description
     # Indicates the directions of money movement for which this payment method is intended to be used.