stripe 13.5.0 → 14.0.0

data/lib/stripe/services/account_session_service.rb

@@ -3,6 +3,490 @@
 
 module Stripe
   class AccountSessionService < StripeService
+    class CreateParams < Stripe::RequestParams
+      class Components < Stripe::RequestParams
+        class AccountManagement < Stripe::RequestParams
+          class Features < Stripe::RequestParams
+            # Disables Stripe user authentication for this embedded component. This value can only be true for accounts where `controller.requirement_collection` is `application`. The default value is the opposite of the `external_account_collection` value. For example, if you don’t set `external_account_collection`, it defaults to true and `disable_stripe_user_authentication` defaults to false.
+            attr_accessor :disable_stripe_user_authentication
+            # Whether to allow platforms to control bank account collection for their connected accounts. This feature can only be false for accounts where you’re responsible for collecting updated information when requirements are due or change, like custom accounts. Otherwise, bank account collection is determined by compliance requirements. The default value for this feature is `true`.
+            attr_accessor :external_account_collection
+
+            def initialize(
+              disable_stripe_user_authentication: nil,
+              external_account_collection: nil
+            )
+              @disable_stripe_user_authentication = disable_stripe_user_authentication
+              @external_account_collection = external_account_collection
+            end
+          end
+          # Whether the embedded component is enabled.
+          attr_accessor :enabled
+          # The list of features enabled in the embedded component.
+          attr_accessor :features
+
+          def initialize(enabled: nil, features: nil)
+            @enabled = enabled
+            @features = features
+          end
+        end
+
+        class AccountOnboarding < Stripe::RequestParams
+          class Features < Stripe::RequestParams
+            # Disables Stripe user authentication for this embedded component. This value can only be true for accounts where `controller.requirement_collection` is `application`. The default value is the opposite of the `external_account_collection` value. For example, if you don’t set `external_account_collection`, it defaults to true and `disable_stripe_user_authentication` defaults to false.
+            attr_accessor :disable_stripe_user_authentication
+            # Whether to allow platforms to control bank account collection for their connected accounts. This feature can only be false for accounts where you’re responsible for collecting updated information when requirements are due or change, like custom accounts. Otherwise, bank account collection is determined by compliance requirements. The default value for this feature is `true`.
+            attr_accessor :external_account_collection
+
+            def initialize(
+              disable_stripe_user_authentication: nil,
+              external_account_collection: nil
+            )
+              @disable_stripe_user_authentication = disable_stripe_user_authentication
+              @external_account_collection = external_account_collection
+            end
+          end
+          # Whether the embedded component is enabled.
+          attr_accessor :enabled
+          # The list of features enabled in the embedded component.
+          attr_accessor :features
+
+          def initialize(enabled: nil, features: nil)
+            @enabled = enabled
+            @features = features
+          end
+        end
+
+        class Balances < Stripe::RequestParams
+          class Features < Stripe::RequestParams
+            # Disables Stripe user authentication for this embedded component. This value can only be true for accounts where `controller.requirement_collection` is `application`. The default value is the opposite of the `external_account_collection` value. For example, if you don’t set `external_account_collection`, it defaults to true and `disable_stripe_user_authentication` defaults to false.
+            attr_accessor :disable_stripe_user_authentication
+            # Whether to allow payout schedule to be changed. Default `true` when Stripe owns Loss Liability, default `false` otherwise.
+            attr_accessor :edit_payout_schedule
+            # Whether to allow platforms to control bank account collection for their connected accounts. This feature can only be false for accounts where you’re responsible for collecting updated information when requirements are due or change, like custom accounts. Otherwise, bank account collection is determined by compliance requirements. The default value for this feature is `true`.
+            attr_accessor :external_account_collection
+            # Whether to allow creation of instant payouts. Default `true` when Stripe owns Loss Liability, default `false` otherwise.
+            attr_accessor :instant_payouts
+            # Whether to allow creation of standard payouts. Default `true` when Stripe owns Loss Liability, default `false` otherwise.
+            attr_accessor :standard_payouts
+
+            def initialize(
+              disable_stripe_user_authentication: nil,
+              edit_payout_schedule: nil,
+              external_account_collection: nil,
+              instant_payouts: nil,
+              standard_payouts: nil
+            )
+              @disable_stripe_user_authentication = disable_stripe_user_authentication
+              @edit_payout_schedule = edit_payout_schedule
+              @external_account_collection = external_account_collection
+              @instant_payouts = instant_payouts
+              @standard_payouts = standard_payouts
+            end
+          end
+          # Whether the embedded component is enabled.
+          attr_accessor :enabled
+          # The list of features enabled in the embedded component.
+          attr_accessor :features
+
+          def initialize(enabled: nil, features: nil)
+            @enabled = enabled
+            @features = features
+          end
+        end
+
+        class Documents < Stripe::RequestParams
+          class Features < Stripe::RequestParams
+          end
+          # Whether the embedded component is enabled.
+          attr_accessor :enabled
+          # The list of features enabled in the embedded component.
+          attr_accessor :features
+
+          def initialize(enabled: nil, features: nil)
+            @enabled = enabled
+            @features = features
+          end
+        end
+
+        class FinancialAccount < Stripe::RequestParams
+          class Features < Stripe::RequestParams
+            # Disables Stripe user authentication for this embedded component. This value can only be true for accounts where `controller.requirement_collection` is `application`. The default value is the opposite of the `external_account_collection` value. For example, if you don’t set `external_account_collection`, it defaults to true and `disable_stripe_user_authentication` defaults to false.
+            attr_accessor :disable_stripe_user_authentication
+            # Whether to allow external accounts to be linked for money transfer.
+            attr_accessor :external_account_collection
+            # Whether to allow sending money.
+            attr_accessor :send_money
+            # Whether to allow transferring balance.
+            attr_accessor :transfer_balance
+
+            def initialize(
+              disable_stripe_user_authentication: nil,
+              external_account_collection: nil,
+              send_money: nil,
+              transfer_balance: nil
+            )
+              @disable_stripe_user_authentication = disable_stripe_user_authentication
+              @external_account_collection = external_account_collection
+              @send_money = send_money
+              @transfer_balance = transfer_balance
+            end
+          end
+          # Whether the embedded component is enabled.
+          attr_accessor :enabled
+          # The list of features enabled in the embedded component.
+          attr_accessor :features
+
+          def initialize(enabled: nil, features: nil)
+            @enabled = enabled
+            @features = features
+          end
+        end
+
+        class FinancialAccountTransactions < Stripe::RequestParams
+          class Features < Stripe::RequestParams
+            # Whether to allow card spend dispute management features.
+            attr_accessor :card_spend_dispute_management
+
+            def initialize(card_spend_dispute_management: nil)
+              @card_spend_dispute_management = card_spend_dispute_management
+            end
+          end
+          # Whether the embedded component is enabled.
+          attr_accessor :enabled
+          # The list of features enabled in the embedded component.
+          attr_accessor :features
+
+          def initialize(enabled: nil, features: nil)
+            @enabled = enabled
+            @features = features
+          end
+        end
+
+        class IssuingCard < Stripe::RequestParams
+          class Features < Stripe::RequestParams
+            # Whether to allow card management features.
+            attr_accessor :card_management
+            # Whether to allow card spend dispute management features.
+            attr_accessor :card_spend_dispute_management
+            # Whether to allow cardholder management features.
+            attr_accessor :cardholder_management
+            # Whether to allow spend control management features.
+            attr_accessor :spend_control_management
+
+            def initialize(
+              card_management: nil,
+              card_spend_dispute_management: nil,
+              cardholder_management: nil,
+              spend_control_management: nil
+            )
+              @card_management = card_management
+              @card_spend_dispute_management = card_spend_dispute_management
+              @cardholder_management = cardholder_management
+              @spend_control_management = spend_control_management
+            end
+          end
+          # Whether the embedded component is enabled.
+          attr_accessor :enabled
+          # The list of features enabled in the embedded component.
+          attr_accessor :features
+
+          def initialize(enabled: nil, features: nil)
+            @enabled = enabled
+            @features = features
+          end
+        end
+
+        class IssuingCardsList < Stripe::RequestParams
+          class Features < Stripe::RequestParams
+            # Whether to allow card management features.
+            attr_accessor :card_management
+            # Whether to allow card spend dispute management features.
+            attr_accessor :card_spend_dispute_management
+            # Whether to allow cardholder management features.
+            attr_accessor :cardholder_management
+            # Disables Stripe user authentication for this embedded component. This feature can only be false for accounts where you’re responsible for collecting updated information when requirements are due or change, like custom accounts.
+            attr_accessor :disable_stripe_user_authentication
+            # Whether to allow spend control management features.
+            attr_accessor :spend_control_management
+
+            def initialize(
+              card_management: nil,
+              card_spend_dispute_management: nil,
+              cardholder_management: nil,
+              disable_stripe_user_authentication: nil,
+              spend_control_management: nil
+            )
+              @card_management = card_management
+              @card_spend_dispute_management = card_spend_dispute_management
+              @cardholder_management = cardholder_management
+              @disable_stripe_user_authentication = disable_stripe_user_authentication
+              @spend_control_management = spend_control_management
+            end
+          end
+          # Whether the embedded component is enabled.
+          attr_accessor :enabled
+          # The list of features enabled in the embedded component.
+          attr_accessor :features
+
+          def initialize(enabled: nil, features: nil)
+            @enabled = enabled
+            @features = features
+          end
+        end
+
+        class NotificationBanner < Stripe::RequestParams
+          class Features < Stripe::RequestParams
+            # Disables Stripe user authentication for this embedded component. This value can only be true for accounts where `controller.requirement_collection` is `application`. The default value is the opposite of the `external_account_collection` value. For example, if you don’t set `external_account_collection`, it defaults to true and `disable_stripe_user_authentication` defaults to false.
+            attr_accessor :disable_stripe_user_authentication
+            # Whether to allow platforms to control bank account collection for their connected accounts. This feature can only be false for accounts where you’re responsible for collecting updated information when requirements are due or change, like custom accounts. Otherwise, bank account collection is determined by compliance requirements. The default value for this feature is `true`.
+            attr_accessor :external_account_collection
+
+            def initialize(
+              disable_stripe_user_authentication: nil,
+              external_account_collection: nil
+            )
+              @disable_stripe_user_authentication = disable_stripe_user_authentication
+              @external_account_collection = external_account_collection
+            end
+          end
+          # Whether the embedded component is enabled.
+          attr_accessor :enabled
+          # The list of features enabled in the embedded component.
+          attr_accessor :features
+
+          def initialize(enabled: nil, features: nil)
+            @enabled = enabled
+            @features = features
+          end
+        end
+
+        class PaymentDetails < Stripe::RequestParams
+          class Features < Stripe::RequestParams
+            # Whether to allow capturing and cancelling payment intents. This is `true` by default.
+            attr_accessor :capture_payments
+            # Whether to allow connected accounts to manage destination charges that are created on behalf of them. This is `false` by default.
+            attr_accessor :destination_on_behalf_of_charge_management
+            # Whether to allow responding to disputes, including submitting evidence and accepting disputes. This is `true` by default.
+            attr_accessor :dispute_management
+            # Whether to allow sending refunds. This is `true` by default.
+            attr_accessor :refund_management
+
+            def initialize(
+              capture_payments: nil,
+              destination_on_behalf_of_charge_management: nil,
+              dispute_management: nil,
+              refund_management: nil
+            )
+              @capture_payments = capture_payments
+              @destination_on_behalf_of_charge_management = destination_on_behalf_of_charge_management
+              @dispute_management = dispute_management
+              @refund_management = refund_management
+            end
+          end
+          # Whether the embedded component is enabled.
+          attr_accessor :enabled
+          # The list of features enabled in the embedded component.
+          attr_accessor :features
+
+          def initialize(enabled: nil, features: nil)
+            @enabled = enabled
+            @features = features
+          end
+        end
+
+        class Payments < Stripe::RequestParams
+          class Features < Stripe::RequestParams
+            # Whether to allow capturing and cancelling payment intents. This is `true` by default.
+            attr_accessor :capture_payments
+            # Whether to allow connected accounts to manage destination charges that are created on behalf of them. This is `false` by default.
+            attr_accessor :destination_on_behalf_of_charge_management
+            # Whether to allow responding to disputes, including submitting evidence and accepting disputes. This is `true` by default.
+            attr_accessor :dispute_management
+            # Whether to allow sending refunds. This is `true` by default.
+            attr_accessor :refund_management
+
+            def initialize(
+              capture_payments: nil,
+              destination_on_behalf_of_charge_management: nil,
+              dispute_management: nil,
+              refund_management: nil
+            )
+              @capture_payments = capture_payments
+              @destination_on_behalf_of_charge_management = destination_on_behalf_of_charge_management
+              @dispute_management = dispute_management
+              @refund_management = refund_management
+            end
+          end
+          # Whether the embedded component is enabled.
+          attr_accessor :enabled
+          # The list of features enabled in the embedded component.
+          attr_accessor :features
+
+          def initialize(enabled: nil, features: nil)
+            @enabled = enabled
+            @features = features
+          end
+        end
+
+        class Payouts < Stripe::RequestParams
+          class Features < Stripe::RequestParams
+            # Disables Stripe user authentication for this embedded component. This value can only be true for accounts where `controller.requirement_collection` is `application`. The default value is the opposite of the `external_account_collection` value. For example, if you don’t set `external_account_collection`, it defaults to true and `disable_stripe_user_authentication` defaults to false.
+            attr_accessor :disable_stripe_user_authentication
+            # Whether to allow payout schedule to be changed. Default `true` when Stripe owns Loss Liability, default `false` otherwise.
+            attr_accessor :edit_payout_schedule
+            # Whether to allow platforms to control bank account collection for their connected accounts. This feature can only be false for accounts where you’re responsible for collecting updated information when requirements are due or change, like custom accounts. Otherwise, bank account collection is determined by compliance requirements. The default value for this feature is `true`.
+            attr_accessor :external_account_collection
+            # Whether to allow creation of instant payouts. Default `true` when Stripe owns Loss Liability, default `false` otherwise.
+            attr_accessor :instant_payouts
+            # Whether to allow creation of standard payouts. Default `true` when Stripe owns Loss Liability, default `false` otherwise.
+            attr_accessor :standard_payouts
+
+            def initialize(
+              disable_stripe_user_authentication: nil,
+              edit_payout_schedule: nil,
+              external_account_collection: nil,
+              instant_payouts: nil,
+              standard_payouts: nil
+            )
+              @disable_stripe_user_authentication = disable_stripe_user_authentication
+              @edit_payout_schedule = edit_payout_schedule
+              @external_account_collection = external_account_collection
+              @instant_payouts = instant_payouts
+              @standard_payouts = standard_payouts
+            end
+          end
+          # Whether the embedded component is enabled.
+          attr_accessor :enabled
+          # The list of features enabled in the embedded component.
+          attr_accessor :features
+
+          def initialize(enabled: nil, features: nil)
+            @enabled = enabled
+            @features = features
+          end
+        end
+
+        class PayoutsList < Stripe::RequestParams
+          class Features < Stripe::RequestParams
+          end
+          # Whether the embedded component is enabled.
+          attr_accessor :enabled
+          # The list of features enabled in the embedded component.
+          attr_accessor :features
+
+          def initialize(enabled: nil, features: nil)
+            @enabled = enabled
+            @features = features
+          end
+        end
+
+        class TaxRegistrations < Stripe::RequestParams
+          class Features < Stripe::RequestParams
+          end
+          # Whether the embedded component is enabled.
+          attr_accessor :enabled
+          # The list of features enabled in the embedded component.
+          attr_accessor :features
+
+          def initialize(enabled: nil, features: nil)
+            @enabled = enabled
+            @features = features
+          end
+        end
+
+        class TaxSettings < Stripe::RequestParams
+          class Features < Stripe::RequestParams
+          end
+          # Whether the embedded component is enabled.
+          attr_accessor :enabled
+          # The list of features enabled in the embedded component.
+          attr_accessor :features
+
+          def initialize(enabled: nil, features: nil)
+            @enabled = enabled
+            @features = features
+          end
+        end
+        # Configuration for the account management embedded component.
+        attr_accessor :account_management
+        # Configuration for the account onboarding embedded component.
+        attr_accessor :account_onboarding
+        # Configuration for the balances embedded component.
+        attr_accessor :balances
+        # Configuration for the documents embedded component.
+        attr_accessor :documents
+        # Configuration for the financial account embedded component.
+        attr_accessor :financial_account
+        # Configuration for the financial account transactions embedded component.
+        attr_accessor :financial_account_transactions
+        # Configuration for the issuing card embedded component.
+        attr_accessor :issuing_card
+        # Configuration for the issuing cards list embedded component.
+        attr_accessor :issuing_cards_list
+        # Configuration for the notification banner embedded component.
+        attr_accessor :notification_banner
+        # Configuration for the payment details embedded component.
+        attr_accessor :payment_details
+        # Configuration for the payments embedded component.
+        attr_accessor :payments
+        # Configuration for the payouts embedded component.
+        attr_accessor :payouts
+        # Configuration for the payouts list embedded component.
+        attr_accessor :payouts_list
+        # Configuration for the tax registrations embedded component.
+        attr_accessor :tax_registrations
+        # Configuration for the tax settings embedded component.
+        attr_accessor :tax_settings
+
+        def initialize(
+          account_management: nil,
+          account_onboarding: nil,
+          balances: nil,
+          documents: nil,
+          financial_account: nil,
+          financial_account_transactions: nil,
+          issuing_card: nil,
+          issuing_cards_list: nil,
+          notification_banner: nil,
+          payment_details: nil,
+          payments: nil,
+          payouts: nil,
+          payouts_list: nil,
+          tax_registrations: nil,
+          tax_settings: nil
+        )
+          @account_management = account_management
+          @account_onboarding = account_onboarding
+          @balances = balances
+          @documents = documents
+          @financial_account = financial_account
+          @financial_account_transactions = financial_account_transactions
+          @issuing_card = issuing_card
+          @issuing_cards_list = issuing_cards_list
+          @notification_banner = notification_banner
+          @payment_details = payment_details
+          @payments = payments
+          @payouts = payouts
+          @payouts_list = payouts_list
+          @tax_registrations = tax_registrations
+          @tax_settings = tax_settings
+        end
+      end
+      # The identifier of the account to create an Account Session for.
+      attr_accessor :account
+      # Each key of the dictionary represents an embedded component, and each embedded component maps to its configuration (e.g. whether it has been enabled or not).
+      attr_accessor :components
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+
+      def initialize(account: nil, components: nil, expand: nil)
+        @account = account
+        @components = components
+        @expand = expand
+      end
+    end
+
     # Creates a AccountSession object that includes a single-use token that the platform can use on their front-end to grant client-side API access.
     def create(params = {}, opts = {})
       request(

data/lib/stripe/services/apple_pay_domain_service.rb

@@ -3,6 +3,57 @@
 
 module Stripe
   class ApplePayDomainService < StripeService
+    class DeleteParams < Stripe::RequestParams
+    end
+
+    class RetrieveParams < Stripe::RequestParams
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+
+      def initialize(expand: nil)
+        @expand = expand
+      end
+    end
+
+    class ListParams < Stripe::RequestParams
+      # Attribute for param field domain_name
+      attr_accessor :domain_name
+      # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
+      attr_accessor :ending_before
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+      # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
+      attr_accessor :limit
+      # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
+      attr_accessor :starting_after
+
+      def initialize(
+        domain_name: nil,
+        ending_before: nil,
+        expand: nil,
+        limit: nil,
+        starting_after: nil
+      )
+        @domain_name = domain_name
+        @ending_before = ending_before
+        @expand = expand
+        @limit = limit
+        @starting_after = starting_after
+      end
+    end
+
+    class CreateParams < Stripe::RequestParams
+      # Attribute for param field domain_name
+      attr_accessor :domain_name
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+
+      def initialize(domain_name: nil, expand: nil)
+        @domain_name = domain_name
+        @expand = expand
+      end
+    end
+
     # Create an apple pay domain.
     def create(params = {}, opts = {})
       request(

data/lib/stripe/services/application_fee_refund_service.rb

@@ -3,6 +3,60 @@
 
 module Stripe
   class ApplicationFeeRefundService < StripeService
+    class RetrieveParams < Stripe::RequestParams
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+
+      def initialize(expand: nil)
+        @expand = expand
+      end
+    end
+
+    class UpdateParams < Stripe::RequestParams
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+      # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
+      attr_accessor :metadata
+
+      def initialize(expand: nil, metadata: nil)
+        @expand = expand
+        @metadata = metadata
+      end
+    end
+
+    class ListParams < Stripe::RequestParams
+      # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
+      attr_accessor :ending_before
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+      # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
+      attr_accessor :limit
+      # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
+      attr_accessor :starting_after
+
+      def initialize(ending_before: nil, expand: nil, limit: nil, starting_after: nil)
+        @ending_before = ending_before
+        @expand = expand
+        @limit = limit
+        @starting_after = starting_after
+      end
+    end
+
+    class CreateParams < Stripe::RequestParams
+      # A positive integer, in _cents (or local equivalent)_, representing how much of this fee to refund. Can refund only up to the remaining unrefunded amount of the fee.
+      attr_accessor :amount
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+      # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
+      attr_accessor :metadata
+
+      def initialize(amount: nil, expand: nil, metadata: nil)
+        @amount = amount
+        @expand = expand
+        @metadata = metadata
+      end
+    end
+
     # Refunds an application fee that has previously been collected but not yet refunded.
     # Funds will be refunded to the Stripe account from which the fee was originally collected.
     #

data/lib/stripe/services/application_fee_service.rb

@@ -10,6 +10,63 @@ module Stripe
       @refunds = Stripe::ApplicationFeeRefundService.new(@requestor)
     end
 
+    class ListParams < Stripe::RequestParams
+      class Created < Stripe::RequestParams
+        # Minimum value to filter by (exclusive)
+        attr_accessor :gt
+        # Minimum value to filter by (inclusive)
+        attr_accessor :gte
+        # Maximum value to filter by (exclusive)
+        attr_accessor :lt
+        # Maximum value to filter by (inclusive)
+        attr_accessor :lte
+
+        def initialize(gt: nil, gte: nil, lt: nil, lte: nil)
+          @gt = gt
+          @gte = gte
+          @lt = lt
+          @lte = lte
+        end
+      end
+      # Only return application fees for the charge specified by this charge ID.
+      attr_accessor :charge
+      # Only return applications fees that were created during the given date interval.
+      attr_accessor :created
+      # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
+      attr_accessor :ending_before
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+      # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
+      attr_accessor :limit
+      # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
+      attr_accessor :starting_after
+
+      def initialize(
+        charge: nil,
+        created: nil,
+        ending_before: nil,
+        expand: nil,
+        limit: nil,
+        starting_after: nil
+      )
+        @charge = charge
+        @created = created
+        @ending_before = ending_before
+        @expand = expand
+        @limit = limit
+        @starting_after = starting_after
+      end
+    end
+
+    class RetrieveParams < Stripe::RequestParams
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+
+      def initialize(expand: nil)
+        @expand = expand
+      end
+    end
+
     # Returns a list of application fees you've previously collected. The application fees are returned in sorted order, with the most recent fees appearing first.
     def list(params = {}, opts = {})
       request(