stripe 13.3.0 → 13.4.0.pre.beta.1

data/lib/stripe/services/radar/early_fraud_warning_service.rb

@@ -4,6 +4,76 @@
 module Stripe
   module Radar
     class EarlyFraudWarningService < StripeService
+      class ListParams < Stripe::RequestParams
+        class Created < Stripe::RequestParams
+          # Minimum value to filter by (exclusive)
+          attr_accessor :gt
+
+          # Minimum value to filter by (inclusive)
+          attr_accessor :gte
+
+          # Maximum value to filter by (exclusive)
+          attr_accessor :lt
+
+          # Maximum value to filter by (inclusive)
+          attr_accessor :lte
+
+          def initialize(gt: nil, gte: nil, lt: nil, lte: nil)
+            @gt = gt
+            @gte = gte
+            @lt = lt
+            @lte = lte
+          end
+        end
+        # Only return early fraud warnings for the charge specified by this charge ID.
+        attr_accessor :charge
+
+        # Only return early fraud warnings that were created during the given date interval.
+        attr_accessor :created
+
+        # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
+        attr_accessor :ending_before
+
+        # Specifies which fields in the response should be expanded.
+        attr_accessor :expand
+
+        # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
+        attr_accessor :limit
+
+        # Only return early fraud warnings for charges that were created by the PaymentIntent specified by this PaymentIntent ID.
+        attr_accessor :payment_intent
+
+        # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
+        attr_accessor :starting_after
+
+        def initialize(
+          charge: nil,
+          created: nil,
+          ending_before: nil,
+          expand: nil,
+          limit: nil,
+          payment_intent: nil,
+          starting_after: nil
+        )
+          @charge = charge
+          @created = created
+          @ending_before = ending_before
+          @expand = expand
+          @limit = limit
+          @payment_intent = payment_intent
+          @starting_after = starting_after
+        end
+      end
+
+      class RetrieveParams < Stripe::RequestParams
+        # Specifies which fields in the response should be expanded.
+        attr_accessor :expand
+
+        def initialize(expand: nil)
+          @expand = expand
+        end
+      end
+
       # Returns a list of early fraud warnings.
       def list(params = {}, opts = {})
         request(

data/lib/stripe/services/radar/value_list_item_service.rb

@@ -4,6 +4,96 @@
 module Stripe
   module Radar
     class ValueListItemService < StripeService
+      class DeleteParams < Stripe::RequestParams
+      end
+
+      class RetrieveParams < Stripe::RequestParams
+        # Specifies which fields in the response should be expanded.
+        attr_accessor :expand
+
+        def initialize(expand: nil)
+          @expand = expand
+        end
+      end
+
+      class ListParams < Stripe::RequestParams
+        class Created < Stripe::RequestParams
+          # Minimum value to filter by (exclusive)
+          attr_accessor :gt
+
+          # Minimum value to filter by (inclusive)
+          attr_accessor :gte
+
+          # Maximum value to filter by (exclusive)
+          attr_accessor :lt
+
+          # Maximum value to filter by (inclusive)
+          attr_accessor :lte
+
+          def initialize(gt: nil, gte: nil, lt: nil, lte: nil)
+            @gt = gt
+            @gte = gte
+            @lt = lt
+            @lte = lte
+          end
+        end
+        # Only return items that were created during the given date interval.
+        attr_accessor :created
+
+        # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
+        attr_accessor :ending_before
+
+        # Specifies which fields in the response should be expanded.
+        attr_accessor :expand
+
+        # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
+        attr_accessor :limit
+
+        # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
+        attr_accessor :starting_after
+
+        # Return items belonging to the parent list whose value matches the specified value (using an "is like" match).
+        attr_accessor :value
+
+        # Identifier for the parent value list this item belongs to.
+        attr_accessor :value_list
+
+        def initialize(
+          created: nil,
+          ending_before: nil,
+          expand: nil,
+          limit: nil,
+          starting_after: nil,
+          value: nil,
+          value_list: nil
+        )
+          @created = created
+          @ending_before = ending_before
+          @expand = expand
+          @limit = limit
+          @starting_after = starting_after
+          @value = value
+          @value_list = value_list
+        end
+      end
+
+      class CreateParams < Stripe::RequestParams
+        # Specifies which fields in the response should be expanded.
+        attr_accessor :expand
+
+        # The value of the item (whose type must match the type of the parent value list).
+        attr_accessor :value
+
+        # The identifier of the value list which the created item will be added to.
+        attr_accessor :value_list
+
+        def initialize(expand: nil, value: nil, value_list: nil)
+          @expand = expand
+          @value = value
+          @value_list = value_list
+        end
+      end
+
       # Creates a new ValueListItem object, which is added to the specified parent value list.
       def create(params = {}, opts = {})
         request(

data/lib/stripe/services/radar/value_list_service.rb

@@ -4,6 +4,125 @@
 module Stripe
   module Radar
     class ValueListService < StripeService
+      class DeleteParams < Stripe::RequestParams
+      end
+
+      class RetrieveParams < Stripe::RequestParams
+        # Specifies which fields in the response should be expanded.
+        attr_accessor :expand
+
+        def initialize(expand: nil)
+          @expand = expand
+        end
+      end
+
+      class UpdateParams < Stripe::RequestParams
+        # The name of the value list for use in rules.
+        attr_accessor :alias
+
+        # Specifies which fields in the response should be expanded.
+        attr_accessor :expand
+
+        # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
+        attr_accessor :metadata
+
+        # The human-readable name of the value list.
+        attr_accessor :name
+
+        def initialize(alias_: nil, expand: nil, metadata: nil, name: nil)
+          @alias = alias_
+          @expand = expand
+          @metadata = metadata
+          @name = name
+        end
+      end
+
+      class ListParams < Stripe::RequestParams
+        class Created < Stripe::RequestParams
+          # Minimum value to filter by (exclusive)
+          attr_accessor :gt
+
+          # Minimum value to filter by (inclusive)
+          attr_accessor :gte
+
+          # Maximum value to filter by (exclusive)
+          attr_accessor :lt
+
+          # Maximum value to filter by (inclusive)
+          attr_accessor :lte
+
+          def initialize(gt: nil, gte: nil, lt: nil, lte: nil)
+            @gt = gt
+            @gte = gte
+            @lt = lt
+            @lte = lte
+          end
+        end
+        # The alias used to reference the value list when writing rules.
+        attr_accessor :alias
+
+        # A value contained within a value list - returns all value lists containing this value.
+        attr_accessor :contains
+
+        # Only return value lists that were created during the given date interval.
+        attr_accessor :created
+
+        # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
+        attr_accessor :ending_before
+
+        # Specifies which fields in the response should be expanded.
+        attr_accessor :expand
+
+        # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
+        attr_accessor :limit
+
+        # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
+        attr_accessor :starting_after
+
+        def initialize(
+          alias_: nil,
+          contains: nil,
+          created: nil,
+          ending_before: nil,
+          expand: nil,
+          limit: nil,
+          starting_after: nil
+        )
+          @alias = alias_
+          @contains = contains
+          @created = created
+          @ending_before = ending_before
+          @expand = expand
+          @limit = limit
+          @starting_after = starting_after
+        end
+      end
+
+      class CreateParams < Stripe::RequestParams
+        # The name of the value list for use in rules.
+        attr_accessor :alias
+
+        # Specifies which fields in the response should be expanded.
+        attr_accessor :expand
+
+        # Type of the items in the value list. One of `card_fingerprint`, `us_bank_account_fingerprint`, `sepa_debit_fingerprint`, `card_bin`, `email`, `ip_address`, `country`, `string`, `case_sensitive_string`, or `customer_id`. Use `string` if the item type is unknown or mixed.
+        attr_accessor :item_type
+
+        # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
+        attr_accessor :metadata
+
+        # The human-readable name of the value list.
+        attr_accessor :name
+
+        def initialize(alias_: nil, expand: nil, item_type: nil, metadata: nil, name: nil)
+          @alias = alias_
+          @expand = expand
+          @item_type = item_type
+          @metadata = metadata
+          @name = name
+        end
+      end
+
       # Creates a new ValueList object, which can then be referenced in rules.
       def create(params = {}, opts = {})
         request(

data/lib/stripe/services/refund_service.rb

@@ -3,6 +3,164 @@
 
 module Stripe
   class RefundService < StripeService
+    class ListParams < Stripe::RequestParams
+      class Created < Stripe::RequestParams
+        # Minimum value to filter by (exclusive)
+        attr_accessor :gt
+
+        # Minimum value to filter by (inclusive)
+        attr_accessor :gte
+
+        # Maximum value to filter by (exclusive)
+        attr_accessor :lt
+
+        # Maximum value to filter by (inclusive)
+        attr_accessor :lte
+
+        def initialize(gt: nil, gte: nil, lt: nil, lte: nil)
+          @gt = gt
+          @gte = gte
+          @lt = lt
+          @lte = lte
+        end
+      end
+      # Only return refunds for the charge specified by this charge ID.
+      attr_accessor :charge
+
+      # Only return refunds that were created during the given date interval.
+      attr_accessor :created
+
+      # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
+      attr_accessor :ending_before
+
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+
+      # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
+      attr_accessor :limit
+
+      # Only return refunds for the PaymentIntent specified by this ID.
+      attr_accessor :payment_intent
+
+      # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
+      attr_accessor :starting_after
+
+      def initialize(
+        charge: nil,
+        created: nil,
+        ending_before: nil,
+        expand: nil,
+        limit: nil,
+        payment_intent: nil,
+        starting_after: nil
+      )
+        @charge = charge
+        @created = created
+        @ending_before = ending_before
+        @expand = expand
+        @limit = limit
+        @payment_intent = payment_intent
+        @starting_after = starting_after
+      end
+    end
+
+    class CreateParams < Stripe::RequestParams
+      # Attribute for param field amount
+      attr_accessor :amount
+
+      # The identifier of the charge to refund.
+      attr_accessor :charge
+
+      # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
+      attr_accessor :currency
+
+      # Customer whose customer balance to refund from.
+      attr_accessor :customer
+
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+
+      # For payment methods without native refund support (e.g., Konbini, PromptPay), use this email from the customer to receive refund instructions.
+      attr_accessor :instructions_email
+
+      # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
+      attr_accessor :metadata
+
+      # Origin of the refund
+      attr_accessor :origin
+
+      # The identifier of the PaymentIntent to refund.
+      attr_accessor :payment_intent
+
+      # String indicating the reason for the refund. If set, possible values are `duplicate`, `fraudulent`, and `requested_by_customer`. If you believe the charge to be fraudulent, specifying `fraudulent` as the reason will add the associated card and email to your [block lists](https://stripe.com/docs/radar/lists), and will also help us improve our fraud detection algorithms.
+      attr_accessor :reason
+
+      # Boolean indicating whether the application fee should be refunded when refunding this charge. If a full charge refund is given, the full application fee will be refunded. Otherwise, the application fee will be refunded in an amount proportional to the amount of the charge refunded. An application fee can be refunded only by the application that created the charge.
+      attr_accessor :refund_application_fee
+
+      # Boolean indicating whether the transfer should be reversed when refunding this charge. The transfer will be reversed proportionally to the amount being refunded (either the entire or partial amount).<br><br>A transfer can be reversed only by the application that created the charge.
+      attr_accessor :reverse_transfer
+
+      def initialize(
+        amount: nil,
+        charge: nil,
+        currency: nil,
+        customer: nil,
+        expand: nil,
+        instructions_email: nil,
+        metadata: nil,
+        origin: nil,
+        payment_intent: nil,
+        reason: nil,
+        refund_application_fee: nil,
+        reverse_transfer: nil
+      )
+        @amount = amount
+        @charge = charge
+        @currency = currency
+        @customer = customer
+        @expand = expand
+        @instructions_email = instructions_email
+        @metadata = metadata
+        @origin = origin
+        @payment_intent = payment_intent
+        @reason = reason
+        @refund_application_fee = refund_application_fee
+        @reverse_transfer = reverse_transfer
+      end
+    end
+
+    class RetrieveParams < Stripe::RequestParams
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+
+      def initialize(expand: nil)
+        @expand = expand
+      end
+    end
+
+    class UpdateParams < Stripe::RequestParams
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+
+      # Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
+      attr_accessor :metadata
+
+      def initialize(expand: nil, metadata: nil)
+        @expand = expand
+        @metadata = metadata
+      end
+    end
+
+    class CancelParams < Stripe::RequestParams
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+
+      def initialize(expand: nil)
+        @expand = expand
+      end
+    end
+
     # Cancels a refund with a status of requires_action.
     #
     # You can't cancel refunds in other states. Only refunds for payment methods that require customer action can enter the requires_action state.

data/lib/stripe/services/reporting/report_run_service.rb

@@ -4,6 +4,128 @@
 module Stripe
   module Reporting
     class ReportRunService < StripeService
+      class ListParams < Stripe::RequestParams
+        class Created < Stripe::RequestParams
+          # Minimum value to filter by (exclusive)
+          attr_accessor :gt
+
+          # Minimum value to filter by (inclusive)
+          attr_accessor :gte
+
+          # Maximum value to filter by (exclusive)
+          attr_accessor :lt
+
+          # Maximum value to filter by (inclusive)
+          attr_accessor :lte
+
+          def initialize(gt: nil, gte: nil, lt: nil, lte: nil)
+            @gt = gt
+            @gte = gte
+            @lt = lt
+            @lte = lte
+          end
+        end
+        # Only return Report Runs that were created during the given date interval.
+        attr_accessor :created
+
+        # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
+        attr_accessor :ending_before
+
+        # Specifies which fields in the response should be expanded.
+        attr_accessor :expand
+
+        # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
+        attr_accessor :limit
+
+        # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
+        attr_accessor :starting_after
+
+        def initialize(
+          created: nil,
+          ending_before: nil,
+          expand: nil,
+          limit: nil,
+          starting_after: nil
+        )
+          @created = created
+          @ending_before = ending_before
+          @expand = expand
+          @limit = limit
+          @starting_after = starting_after
+        end
+      end
+
+      class CreateParams < Stripe::RequestParams
+        class Parameters < Stripe::RequestParams
+          # The set of report columns to include in the report output. If omitted, the Report Type is run with its default column set.
+          attr_accessor :columns
+
+          # Connected account ID to filter for in the report run.
+          attr_accessor :connected_account
+
+          # Currency of objects to be included in the report run.
+          attr_accessor :currency
+
+          # Ending timestamp of data to be included in the report run (exclusive).
+          attr_accessor :interval_end
+
+          # Starting timestamp of data to be included in the report run.
+          attr_accessor :interval_start
+
+          # Payout ID by which to filter the report run.
+          attr_accessor :payout
+
+          # Category of balance transactions to be included in the report run.
+          attr_accessor :reporting_category
+
+          # Defaults to `Etc/UTC`. The output timezone for all timestamps in the report. A list of possible time zone values is maintained at the [IANA Time Zone Database](http://www.iana.org/time-zones). Has no effect on `interval_start` or `interval_end`.
+          attr_accessor :timezone
+
+          def initialize(
+            columns: nil,
+            connected_account: nil,
+            currency: nil,
+            interval_end: nil,
+            interval_start: nil,
+            payout: nil,
+            reporting_category: nil,
+            timezone: nil
+          )
+            @columns = columns
+            @connected_account = connected_account
+            @currency = currency
+            @interval_end = interval_end
+            @interval_start = interval_start
+            @payout = payout
+            @reporting_category = reporting_category
+            @timezone = timezone
+          end
+        end
+        # Specifies which fields in the response should be expanded.
+        attr_accessor :expand
+
+        # Parameters specifying how the report should be run. Different Report Types have different required and optional parameters, listed in the [API Access to Reports](https://stripe.com/docs/reporting/statements/api) documentation.
+        attr_accessor :parameters
+
+        # The ID of the [report type](https://stripe.com/docs/reporting/statements/api#report-types) to run, such as `"balance.summary.1"`.
+        attr_accessor :report_type
+
+        def initialize(expand: nil, parameters: nil, report_type: nil)
+          @expand = expand
+          @parameters = parameters
+          @report_type = report_type
+        end
+      end
+
+      class RetrieveParams < Stripe::RequestParams
+        # Specifies which fields in the response should be expanded.
+        attr_accessor :expand
+
+        def initialize(expand: nil)
+          @expand = expand
+        end
+      end
+
       # Creates a new object and begin running the report. (Certain report types require a [live-mode API key](https://stripe.com/docs/keys#test-live-modes).)
       def create(params = {}, opts = {})
         request(

data/lib/stripe/services/reporting/report_type_service.rb

@@ -4,6 +4,24 @@
 module Stripe
   module Reporting
     class ReportTypeService < StripeService
+      class ListParams < Stripe::RequestParams
+        # Specifies which fields in the response should be expanded.
+        attr_accessor :expand
+
+        def initialize(expand: nil)
+          @expand = expand
+        end
+      end
+
+      class RetrieveParams < Stripe::RequestParams
+        # Specifies which fields in the response should be expanded.
+        attr_accessor :expand
+
+        def initialize(expand: nil)
+          @expand = expand
+        end
+      end
+
       # Returns a full list of Report Types.
       def list(params = {}, opts = {})
         request(

data/lib/stripe/services/review_service.rb

@@ -3,6 +3,69 @@
 
 module Stripe
   class ReviewService < StripeService
+    class ListParams < Stripe::RequestParams
+      class Created < Stripe::RequestParams
+        # Minimum value to filter by (exclusive)
+        attr_accessor :gt
+
+        # Minimum value to filter by (inclusive)
+        attr_accessor :gte
+
+        # Maximum value to filter by (exclusive)
+        attr_accessor :lt
+
+        # Maximum value to filter by (inclusive)
+        attr_accessor :lte
+
+        def initialize(gt: nil, gte: nil, lt: nil, lte: nil)
+          @gt = gt
+          @gte = gte
+          @lt = lt
+          @lte = lte
+        end
+      end
+      # Only return reviews that were created during the given date interval.
+      attr_accessor :created
+
+      # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
+      attr_accessor :ending_before
+
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+
+      # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
+      attr_accessor :limit
+
+      # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
+      attr_accessor :starting_after
+
+      def initialize(created: nil, ending_before: nil, expand: nil, limit: nil, starting_after: nil)
+        @created = created
+        @ending_before = ending_before
+        @expand = expand
+        @limit = limit
+        @starting_after = starting_after
+      end
+    end
+
+    class RetrieveParams < Stripe::RequestParams
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+
+      def initialize(expand: nil)
+        @expand = expand
+      end
+    end
+
+    class ApproveParams < Stripe::RequestParams
+      # Specifies which fields in the response should be expanded.
+      attr_accessor :expand
+
+      def initialize(expand: nil)
+        @expand = expand
+      end
+    end
+
     # Approves a Review object, closing it and removing it from the list of reviews.
     def approve(review, params = {}, opts = {})
       request(