stitches 4.0.2 → 4.2.0.RC3

data/spec/fake_app/config/environment.rb

@@ -0,0 +1,5 @@
+# Load the Rails application.
+require_relative "application"
+
+# Initialize the Rails application.
+Rails.application.initialize!

data/spec/fake_app/config/environments/development.rb

@@ -0,0 +1,71 @@
+require "active_support/core_ext/integer/time"
+
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # In the development environment your application's code is reloaded any time
+  # it changes. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  # Show full error reports.
+  config.consider_all_requests_local = true
+
+  # Enable/disable caching. By default caching is disabled.
+  # Run rails dev:cache to toggle caching.
+  if Rails.root.join('tmp', 'caching-dev.txt').exist?
+    config.action_controller.perform_caching = true
+    config.action_controller.enable_fragment_cache_logging = true
+
+    config.cache_store = :memory_store
+    config.public_file_server.headers = {
+      'Cache-Control' => "public, max-age=#{2.days.to_i}"
+    }
+  else
+    config.action_controller.perform_caching = false
+
+    config.cache_store = :null_store
+  end
+
+  # Store uploaded files on the local file system (see config/storage.yml for options).
+  config.active_storage.service = :local
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Raise exceptions for disallowed deprecations.
+  config.active_support.disallowed_deprecation = :raise
+
+  # Tell Active Support which deprecation messages to disallow.
+  config.active_support.disallowed_deprecation_warnings = []
+
+  # Raise an error on page load if there are pending migrations.
+  config.active_record.migration_error = :page_load
+
+  # Highlight code that triggered database queries in logs.
+  config.active_record.verbose_query_logs = true
+
+  # Debug mode disables concatenation and preprocessing of assets.
+  # This option may cause significant delays in view rendering with a large
+  # number of complex assets.
+  config.assets.debug = true
+
+  # Suppress logger output for asset requests.
+  config.assets.quiet = true
+
+  # Raises error for missing translations.
+  # config.i18n.raise_on_missing_translations = true
+
+  # Annotate rendered view with file names.
+  # config.action_view.annotate_rendered_view_with_filenames = true
+
+  # Use an evented file watcher to asynchronously detect changes in source code,
+  # routes, locales, etc. This feature depends on the listen gem.
+  # config.file_watcher = ActiveSupport::EventedFileUpdateChecker
+
+  # Uncomment if you wish to allow Action Cable access from any origin.
+  # config.action_cable.disable_request_forgery_protection = true
+end

data/spec/fake_app/config/environments/production.rb

@@ -0,0 +1,109 @@
+require "active_support/core_ext/integer/time"
+
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.cache_classes = true
+
+  # Eager load code on boot. This eager loads most of Rails and
+  # your application in memory, allowing both threaded web servers
+  # and those relying on copy on write to perform better.
+  # Rake tasks automatically ignore this option for performance.
+  config.eager_load = true
+
+  # Full error reports are disabled and caching is turned on.
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Ensures that a master key has been made available in either ENV["RAILS_MASTER_KEY"]
+  # or in config/master.key. This key is used to decrypt credentials (and other encrypted files).
+  # config.require_master_key = true
+
+  # Disable serving static files from the `/public` folder by default since
+  # Apache or NGINX already handles this.
+  config.public_file_server.enabled = ENV['RAILS_SERVE_STATIC_FILES'].present?
+
+  # Compress CSS using a preprocessor.
+  # config.assets.css_compressor = :sass
+
+  # Do not fallback to assets pipeline if a precompiled asset is missed.
+  config.assets.compile = false
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.asset_host = 'http://assets.example.com'
+
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
+
+  # Store uploaded files on the local file system (see config/storage.yml for options).
+  config.active_storage.service = :local
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # Include generic and useful information about system operation, but avoid logging too much
+  # information to avoid inadvertent exposure of personally identifiable information (PII).
+  config.log_level = :info
+
+  # Prepend all log lines with the following tags.
+  config.log_tags = [ :request_id ]
+
+  # Use a different cache store in production.
+  # config.cache_store = :mem_cache_store
+
+  # Use a real queuing backend for Active Job (and separate queues per environment).
+  # config.active_job.queue_adapter     = :resque
+  # config.active_job.queue_name_prefix = "fake_app_production"
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation cannot be found).
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners.
+  config.active_support.deprecation = :notify
+
+  # Log disallowed deprecations.
+  config.active_support.disallowed_deprecation = :log
+
+  # Tell Active Support which deprecation messages to disallow.
+  config.active_support.disallowed_deprecation_warnings = []
+
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = ::Logger::Formatter.new
+
+  # Use a different logger for distributed setups.
+  # require "syslog/logger"
+  # config.logger = ActiveSupport::TaggedLogging.new(Syslog::Logger.new 'app-name')
+
+  if ENV["RAILS_LOG_TO_STDOUT"].present?
+    logger           = ActiveSupport::Logger.new(STDOUT)
+    logger.formatter = config.log_formatter
+    config.logger    = ActiveSupport::TaggedLogging.new(logger)
+  end
+
+  # Do not dump schema after migrations.
+  config.active_record.dump_schema_after_migration = false
+
+  # Inserts middleware to perform automatic connection switching.
+  # The `database_selector` hash is used to pass options to the DatabaseSelector
+  # middleware. The `delay` is used to determine how long to wait after a write
+  # to send a subsequent read to the primary.
+  #
+  # The `database_resolver` class is used by the middleware to determine which
+  # database is appropriate to use based on the time delay.
+  #
+  # The `database_resolver_context` class is used by the middleware to set
+  # timestamps for the last write to the primary. The resolver uses the context
+  # class timestamps to determine how long to wait before reading from the
+  # replica.
+  #
+  # By default Rails will store a last write timestamp in the session. The
+  # DatabaseSelector middleware is designed as such you can define your own
+  # strategy for connection switching and pass that into the middleware through
+  # these configuration options.
+  # config.active_record.database_selector = { delay: 2.seconds }
+  # config.active_record.database_resolver = ActiveRecord::Middleware::DatabaseSelector::Resolver
+  # config.active_record.database_resolver_context = ActiveRecord::Middleware::DatabaseSelector::Resolver::Session
+end

data/spec/fake_app/config/environments/test.rb

@@ -0,0 +1,52 @@
+require "active_support/core_ext/integer/time"
+
+# The test environment is used exclusively to run your application's
+# test suite. You never need to work with it otherwise. Remember that
+# your test database is "scratch space" for the test suite and is wiped
+# and recreated between test runs. Don't rely on the data there!
+
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  config.cache_classes = true
+
+  # Do not eager load code on boot. This avoids loading your whole application
+  # just for the purpose of running a single test. If you are using a tool that
+  # preloads Rails for running tests, you may have to set it to true.
+  config.eager_load = false
+
+  # Configure public file server for tests with Cache-Control for performance.
+  config.public_file_server.enabled = true
+  config.public_file_server.headers = {
+    'Cache-Control' => "public, max-age=#{1.hour.to_i}"
+  }
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+  config.cache_store = :null_store
+
+  # Raise exceptions instead of rendering exception templates.
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment.
+  config.action_controller.allow_forgery_protection = false
+
+  # Store uploaded files on the local file system in a temporary directory.
+  config.active_storage.service = :test
+
+  # Print deprecation notices to the stderr.
+  config.active_support.deprecation = :stderr
+
+  # Raise exceptions for disallowed deprecations.
+  config.active_support.disallowed_deprecation = :raise
+
+  # Tell Active Support which deprecation messages to disallow.
+  config.active_support.disallowed_deprecation_warnings = []
+
+  # Raises error for missing translations.
+  # config.i18n.raise_on_missing_translations = true
+
+  # Annotate rendered view with file names.
+  # config.action_view.annotate_rendered_view_with_filenames = true
+end

data/spec/fake_app/config/initializers/assets.rb

@@ -0,0 +1,12 @@
+# Be sure to restart your server when you modify this file.
+
+# Version of your assets, change this if you want to expire all your assets.
+Rails.application.config.assets.version = '1.0'
+
+# Add additional assets to the asset load path.
+# Rails.application.config.assets.paths << Emoji.images_path
+
+# Precompile additional assets.
+# application.js, application.css, and all non-JS/CSS in the app/assets
+# folder are already added.
+# Rails.application.config.assets.precompile += %w( admin.js admin.css )

data/spec/fake_app/config/initializers/cookies_serializer.rb

@@ -0,0 +1,5 @@
+# Be sure to restart your server when you modify this file.
+
+# Specify a serializer for the signed and encrypted cookie jars.
+# Valid options are :json, :marshal, and :hybrid.
+Rails.application.config.action_dispatch.cookies_serializer = :json

data/spec/fake_app/config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,6 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure sensitive parameters which will be filtered from the log file.
+Rails.application.config.filter_parameters += [
+  :passw, :secret, :token, :_key, :crypt, :salt, :certificate, :otp, :ssn
+]

data/spec/fake_app/config/initializers/stitches.rb

@@ -0,0 +1,24 @@
+require 'stitches'
+
+Stitches.configure do |configuration|
+  # Regexp of urls that do not require ApiKeys or valid, versioned mime types
+  configuration.allowlist_regexp = %r{\A/(resque|docs|assets)(\Z|/.*\Z)}
+
+  # Name of the custom Authorization scheme.  See http://www.ietf.org/rfc/rfc2617.txt for details,
+  # but generally should be a string with no spaces or special characters.
+  configuration.custom_http_auth_scheme = "CustomKeyAuth"
+
+  # Env var that gets the primary key of the authenticated ApiKey
+  # for access in your controllers, so they don't need to re-parse the header
+  # configuration.env_var_to_hold_api_client_primary_key = "YOUR_ENV_VAR"
+
+  # Configures how long to cache ApiKeys in memory (In Seconds)
+  # A value of 0 will disable the cache entierly
+  # Default is 0
+  # configuration.max_cache_ttl = 5
+
+  # Configures how many ApiKeys to cache at one time
+  # This should be larger then the number of clients
+  # Default is 0
+  # configuration.max_cache_size = 100
+end

data/spec/fake_app/config/locales/en.yml

@@ -0,0 +1,33 @@
+# Files in the config/locales directory are used for internationalization
+# and are automatically loaded by Rails. If you want to use locales other
+# than English, add the necessary files in this directory.
+#
+# To use the locales, use `I18n.t`:
+#
+#     I18n.t 'hello'
+#
+# In views, this is aliased to just `t`:
+#
+#     <%= t('hello') %>
+#
+# To use a different locale, set it with `I18n.locale`:
+#
+#     I18n.locale = :es
+#
+# This would use the information in config/locales/es.yml.
+#
+# The following keys must be escaped otherwise they will not be retrieved by
+# the default I18n backend:
+#
+# true, false, on, off, yes, no
+#
+# Instead, surround them with single quotes.
+#
+# en:
+#   'true': 'foo'
+#
+# To learn more, please read the Rails Internationalization guide
+# available at https://guides.rubyonrails.org/i18n.html.
+
+en:
+  hello: "Hello world"

data/spec/fake_app/config/master.key

@@ -0,0 +1 @@
+a91e4dee79a29b1b046fc275265a713d

data/spec/fake_app/config/puma.rb

@@ -0,0 +1,43 @@
+# Puma can serve each request in a thread from an internal thread pool.
+# The `threads` method setting takes two numbers: a minimum and maximum.
+# Any libraries that use thread pools should be configured to match
+# the maximum value specified for Puma. Default is set to 5 threads for minimum
+# and maximum; this matches the default thread size of Active Record.
+#
+max_threads_count = ENV.fetch("RAILS_MAX_THREADS") { 5 }
+min_threads_count = ENV.fetch("RAILS_MIN_THREADS") { max_threads_count }
+threads min_threads_count, max_threads_count
+
+# Specifies the `worker_timeout` threshold that Puma will use to wait before
+# terminating a worker in development environments.
+#
+worker_timeout 3600 if ENV.fetch("RAILS_ENV", "development") == "development"
+
+# Specifies the `port` that Puma will listen on to receive requests; default is 3000.
+#
+port ENV.fetch("PORT") { 3000 }
+
+# Specifies the `environment` that Puma will run in.
+#
+environment ENV.fetch("RAILS_ENV") { "development" }
+
+# Specifies the `pidfile` that Puma will use.
+pidfile ENV.fetch("PIDFILE") { "tmp/pids/server.pid" }
+
+# Specifies the number of `workers` to boot in clustered mode.
+# Workers are forked web server processes. If using threads and workers together
+# the concurrency of the application would be max `threads` * `workers`.
+# Workers do not work on JRuby or Windows (both of which do not support
+# processes).
+#
+# workers ENV.fetch("WEB_CONCURRENCY") { 2 }
+
+# Use the `preload_app!` method when specifying a `workers` number.
+# This directive tells Puma to first boot the application and load code
+# before forking the application. This takes advantage of Copy On Write
+# process behavior so workers use less memory.
+#
+# preload_app!
+
+# Allow puma to be restarted by `rails restart` command.
+plugin :tmp_restart

data/spec/fake_app/config/routes.rb

@@ -0,0 +1,17 @@
+Rails.application.routes.draw do
+  # For details on the DSL available within this file, see https://guides.rubyonrails.org/routing.html
+namespace :api do
+  scope module: :v1, constraints: Stitches::ApiVersionConstraint.new(1) do
+    resource 'ping', only: [ :create ]
+    resource 'hellos'
+    # Add your V1 resources here
+  end
+  scope module: :v2, constraints: Stitches::ApiVersionConstraint.new(2) do
+    resource 'ping', only: [ :create ]
+    resource 'hellos'
+    # This is here simply to validate that versioning is working
+    # as well as for your client to be able to validate this as well.
+  end
+end
+
+end

data/spec/fake_app/config/storage.yml

@@ -0,0 +1,34 @@
+test:
+  service: Disk
+  root: <%= Rails.root.join("tmp/storage") %>
+
+local:
+  service: Disk
+  root: <%= Rails.root.join("storage") %>
+
+# Use rails credentials:edit to set the AWS secrets (as aws:access_key_id|secret_access_key)
+# amazon:
+#   service: S3
+#   access_key_id: <%= Rails.application.credentials.dig(:aws, :access_key_id) %>
+#   secret_access_key: <%= Rails.application.credentials.dig(:aws, :secret_access_key) %>
+#   region: us-east-1
+#   bucket: your_own_bucket
+
+# Remember not to checkin your GCS keyfile to a repository
+# google:
+#   service: GCS
+#   project: your_project
+#   credentials: <%= Rails.root.join("path/to/gcs.keyfile") %>
+#   bucket: your_own_bucket
+
+# Use rails credentials:edit to set the Azure Storage secret (as azure_storage:storage_access_key)
+# microsoft:
+#   service: AzureStorage
+#   storage_account_name: your_account_name
+#   storage_access_key: <%= Rails.application.credentials.dig(:azure_storage, :storage_access_key) %>
+#   container: your_container_name
+
+# mirror:
+#   service: Mirror
+#   primary: local
+#   mirrors: [ amazon, google, microsoft ]

data/spec/fake_app/db/migrate/20210802153118_enable_uuid_ossp_extension.rb

@@ -0,0 +1,7 @@
+
+class EnableUuidOsspExtension < ActiveRecord::Migration[6.1]
+
+  def change
+    enable_extension 'uuid-ossp'
+  end
+end