squib 0.17.2 → 0.19.0a

data/lib/squib/commands/make_sprue.rb

@@ -1,277 +1,277 @@
-require 'fileutils'
-require 'pathname'
-require 'highline'
-require 'bigdecimal'
-require 'yaml'
-require_relative 'data/template_option'
-
-module Squib
-  # Squib's command-line option
-  module Commands
-    # Generate a template definition file that can be used for
-    # +save_templated_sheet+
-    #
-    # @api public
-    class MakeSprue
-      # :nodoc:
-      # @api private
-      def process(args, input = $stdin, output = $stdout)
-        # Get definitions from the user
-        @option = prompt(input, output)
-
-        @printable_edge_right = (
-          @option.sheet_width - @option.sheet_margin.right)
-        @printable_edge_bottom = (
-          @option.sheet_height - @option.sheet_margin.bottom)
-        @card_iter_x = @option.card_width + @option.card_gap.horizontal
-        @card_iter_y = @option.card_height + @option.card_gap.vertical
-
-        # Recalculate the sheet margin if the sheet alignment is in the center
-        if @option.sheet_align == :center
-          @option.sheet_margin = recalculate_center_align_sheet
-        end
-
-        # We would now have to output the file
-        YAML.dump generate_template, File.new(@option.output_file, 'w')
-      end
-
-      private
-
-      # Accept user input that defines the template.
-      def prompt(input, output)
-        option = TemplateOption.new
-        cli = HighLine.new(input, output)
-
-        option.unit = cli.choose do |menu|
-          menu.prompt = 'What measure unit should we use? '
-          menu.choice(:in)
-          menu.choice(:cm)
-          menu.choice(:mm)
-        end
-
-        cli.choose do |menu|
-          menu.prompt = 'What paper size you are using? '
-          menu.choice('A4, portrait') do
-            option.sheet_width = convert_measurement_value(
-              210, :mm, option.unit
-            )
-            option.sheet_height = convert_measurement_value(
-              297, :mm, option.unit
-            )
-          end
-          menu.choice('A4, landscape') do
-            option.sheet_width = convert_measurement_value(
-              297, :mm, option.unit
-            )
-            option.sheet_height = convert_measurement_value(
-              210, :mm, option.unit
-            )
-          end
-          menu.choice('US letter, portrait') do
-            option.sheet_width = convert_measurement_value(
-              8.5, :in, option.unit
-            )
-            option.sheet_height = convert_measurement_value(
-              11, :in, option.unit
-            )
-          end
-          menu.choice('US letter, landscape') do
-            option.sheet_width = convert_measurement_value(
-              11, :in, option.unit
-            )
-            option.sheet_height = convert_measurement_value(
-              8.5, :in, option.unit
-            )
-          end
-          menu.choice('Custom size') do
-            option.sheet_width = cli.ask(
-              "Custom paper width? (#{option.unit}) ", Float
-            )
-            option.sheet_height = cli.ask(
-              "Custom paper height? (#{option.unit}) ", Float
-            )
-          end
-        end
-
-        option.sheet_margin = cli.ask(
-          "Sheet margins? (#{option.unit}) "
-        ) do |q|
-          q.validate = /^((\d+\.\d+|\d+) ){0,3}(\d+\.\d+|\d+)/
-        end
-        option.sheet_align = cli.choose do |menu|
-          menu.prompt = 'How to align cards on sheet? [left] '
-          menu.choice(:left)
-          menu.choice(:right)
-          menu.choice(:center)
-          menu.default = :left
-        end
-
-        option.card_width = cli.ask(
-          "Card width? (#{option.unit}) ", Float
-        ) { |q| q.above = 0 }
-        option.card_height = cli.ask(
-          "Card height? (#{option.unit}) ", Float
-        ) { |q| q.above = 0 }
-        option.card_gap = cli.ask(
-          "Gap between cards? (#{option.unit}) "
-        ) { |q| q.validate = /^((\d+\.\d+|\d+))(\s+(\d+\.\d+|\d+))?/ }
-
-        option.card_ordering = cli.choose do |menu|
-          menu.prompt = 'How to layout your cards? [rows]'
-          menu.choice(:rows, text: 'In rows')
-          menu.choice(:columns, text: 'In columns')
-          menu.default = :rows
-        end
-
-        option.crop_lines = cli.choose do |menu|
-          menu.prompt = 'Generate crop lines? [true]'
-          menu.choice(:true)
-          menu.choice(:false)
-          menu.default = :true
-        end
-
-        option.output_file = cli.ask('Output to? ') do |q|
-          q.validate = lambda do |path_str|
-            path = Pathname.new path_str
-            if path.exist?
-              path.writable? && !path.directory?
-            else
-              path.dirname.writable?
-            end
-          end
-
-          q.responses[:not_valid] = (
-            'The filename specified is not a writable file or is a directory.'
-          )
-          q.default = 'template.yml'
-        end
-
-        option
-      end
-
-      def convert_measurement_value(val, from_unit, to_unit)
-        return val if from_unit == to_unit
-
-        if from_unit == :in
-          val_mm = val * 25.4
-        elsif from_unit == :cm
-          val_mm = val * 10.0
-        else
-          val_mm = val
-        end
-
-        if to_unit == :in
-          val_mm / 25.4
-        elsif to_unit == :cm
-          val_mm / 10.0
-        else
-          val_mm
-        end
-      end
-
-      def generate_template
-        x = @option.sheet_margin.left
-        y = @option.sheet_margin.top
-        cards = []
-        horizontal_crop_lines = Set.new
-        vertical_crop_lines = Set.new
-
-        while (
-            x + @card_iter_x < @printable_edge_right &&
-            y + @card_iter_y < @printable_edge_bottom)
-          xpos = x + @option.card_gap.horizontal
-          ypos = y + @option.card_gap.vertical
-          cards.push(
-            'x' => "#{xpos}#{@option.unit}",
-            'y' => "#{ypos}#{@option.unit}"
-          )
-
-          # Append the crop lines
-          vertical_crop_lines.add xpos
-          vertical_crop_lines.add xpos + @option.card_width
-          horizontal_crop_lines.add ypos
-          horizontal_crop_lines.add ypos + @option.card_height
-
-          # Calculate the next iterator
-          if @option.card_ordering == :rows
-            x, y = next_card_pos_row(x, y)
-          elsif @option.card_ordering == :columns
-            x, y = next_card_pos_col(x, y)
-          else
-            raise RunTimeException, 'Invalid card ordering value received'
-          end
-        end
-
-        output = {
-          'sheet_width' => "#{@option.sheet_width}#{@option.unit}",
-          'sheet_height' => "#{@option.sheet_height}#{@option.unit}",
-          'card_width' => "#{@option.card_width}#{@option.unit}",
-          'card_height' => "#{@option.card_height}#{@option.unit}",
-          'cards' => cards
-        }
-
-        if @option.crop_lines == :true
-          lines = []
-          vertical_crop_lines.each do |val|
-            lines.push(
-              'type' => :vertical, 'position' => "#{val}#{@option.unit}"
-            )
-          end
-          horizontal_crop_lines.each do |val|
-            lines.push(
-              'type' => :horizontal, 'position' => "#{val}#{@option.unit}"
-            )
-          end
-          output['crop_line'] = { 'lines' => lines }
-        end
-
-        # Return the output data
-        output
-      end
-
-      def recalculate_center_align_sheet
-        # We will still respect the user specified margins
-        printable_width = (
-          @option.sheet_width - @option.sheet_margin.left -
-          @option.sheet_margin.right)
-        num_of_cols, remainder = printable_width.divmod(@card_iter_x)
-        if (
-            @option.card_gap.horizontal > 0 &&
-            remainder < @option.card_gap.horizontal)
-          num_of_cols -= 1
-        end
-
-        new_hor_margin = (
-          (@option.sheet_width - num_of_cols * @card_iter_x -
-           @option.card_gap.horizontal) / 2)
-        Margin.new [
-          @option.sheet_margin.top,
-          new_hor_margin,
-          @option.sheet_margin.bottom
-        ]
-      end
-
-      def next_card_pos_row(x, y)
-        x += @card_iter_x
-
-        if (x + @card_iter_x) > @printable_edge_right
-          x = @option.sheet_margin.left
-          y += @card_iter_y
-        end
-
-        [x, y]
-      end
-
-      def next_card_pos_col(x, y)
-        y += @card_iter_y
-
-        if (y + @card_iter_y) > @printable_edge_bottom
-          x += @card_iter_x
-          y = @option.sheet_margin.top
-        end
-
-        [x, y]
-      end
-    end
-  end
-end
+require 'fileutils'
+require 'pathname'
+require 'highline'
+require 'bigdecimal'
+require 'yaml'
+require_relative 'data/template_option'
+
+module Squib
+  # Squib's command-line option
+  module Commands
+    # Generate a template definition file that can be used for
+    # +save_templated_sheet+
+    #
+    # @api public
+    class MakeSprue
+      # :nodoc:
+      # @api private
+      def process(args, input = $stdin, output = $stdout)
+        # Get definitions from the user
+        @option = prompt(input, output)
+
+        @printable_edge_right = (
+          @option.sheet_width - @option.sheet_margin.right)
+        @printable_edge_bottom = (
+          @option.sheet_height - @option.sheet_margin.bottom)
+        @card_iter_x = @option.card_width + @option.card_gap.horizontal
+        @card_iter_y = @option.card_height + @option.card_gap.vertical
+
+        # Recalculate the sheet margin if the sheet alignment is in the center
+        if @option.sheet_align == :center
+          @option.sheet_margin = recalculate_center_align_sheet
+        end
+
+        # We would now have to output the file
+        YAML.dump generate_template, File.new(@option.output_file, 'w')
+      end
+
+      private
+
+      # Accept user input that defines the template.
+      def prompt(input, output)
+        option = TemplateOption.new
+        cli = HighLine.new(input, output)
+
+        option.unit = cli.choose do |menu|
+          menu.prompt = 'What measure unit should we use? '
+          menu.choice(:in)
+          menu.choice(:cm)
+          menu.choice(:mm)
+        end
+
+        cli.choose do |menu|
+          menu.prompt = 'What paper size you are using? '
+          menu.choice('A4, portrait') do
+            option.sheet_width = convert_measurement_value(
+              210, :mm, option.unit
+            )
+            option.sheet_height = convert_measurement_value(
+              297, :mm, option.unit
+            )
+          end
+          menu.choice('A4, landscape') do
+            option.sheet_width = convert_measurement_value(
+              297, :mm, option.unit
+            )
+            option.sheet_height = convert_measurement_value(
+              210, :mm, option.unit
+            )
+          end
+          menu.choice('US letter, portrait') do
+            option.sheet_width = convert_measurement_value(
+              8.5, :in, option.unit
+            )
+            option.sheet_height = convert_measurement_value(
+              11, :in, option.unit
+            )
+          end
+          menu.choice('US letter, landscape') do
+            option.sheet_width = convert_measurement_value(
+              11, :in, option.unit
+            )
+            option.sheet_height = convert_measurement_value(
+              8.5, :in, option.unit
+            )
+          end
+          menu.choice('Custom size') do
+            option.sheet_width = cli.ask(
+              "Custom paper width? (#{option.unit}) ", Float
+            )
+            option.sheet_height = cli.ask(
+              "Custom paper height? (#{option.unit}) ", Float
+            )
+          end
+        end
+
+        option.sheet_margin = cli.ask(
+          "Sheet margins? (#{option.unit}) "
+        ) do |q|
+          q.validate = /^((\d+\.\d+|\d+) ){0,3}(\d+\.\d+|\d+)/
+        end
+        option.sheet_align = cli.choose do |menu|
+          menu.prompt = 'How to align cards on sheet? [left] '
+          menu.choice(:left)
+          menu.choice(:right)
+          menu.choice(:center)
+          menu.default = :left
+        end
+
+        option.card_width = cli.ask(
+          "Card width? (#{option.unit}) ", Float
+        ) { |q| q.above = 0 }
+        option.card_height = cli.ask(
+          "Card height? (#{option.unit}) ", Float
+        ) { |q| q.above = 0 }
+        option.card_gap = cli.ask(
+          "Gap between cards? (#{option.unit}) "
+        ) { |q| q.validate = /^((\d+\.\d+|\d+))(\s+(\d+\.\d+|\d+))?/ }
+
+        option.card_ordering = cli.choose do |menu|
+          menu.prompt = 'How to layout your cards? [rows]'
+          menu.choice(:rows, text: 'In rows')
+          menu.choice(:columns, text: 'In columns')
+          menu.default = :rows
+        end
+
+        option.crop_lines = cli.choose do |menu|
+          menu.prompt = 'Generate crop lines? [true]'
+          menu.choice(:true)
+          menu.choice(:false)
+          menu.default = :true
+        end
+
+        option.output_file = cli.ask('Output to? ') do |q|
+          q.validate = lambda do |path_str|
+            path = Pathname.new path_str
+            if path.exist?
+              path.writable? && !path.directory?
+            else
+              path.dirname.writable?
+            end
+          end
+
+          q.responses[:not_valid] = (
+            'The filename specified is not a writable file or is a directory.'
+          )
+          q.default = 'template.yml'
+        end
+
+        option
+      end
+
+      def convert_measurement_value(val, from_unit, to_unit)
+        return val if from_unit == to_unit
+
+        if from_unit == :in
+          val_mm = val * 25.4
+        elsif from_unit == :cm
+          val_mm = val * 10.0
+        else
+          val_mm = val
+        end
+
+        if to_unit == :in
+          val_mm / 25.4
+        elsif to_unit == :cm
+          val_mm / 10.0
+        else
+          val_mm
+        end
+      end
+
+      def generate_template
+        x = @option.sheet_margin.left
+        y = @option.sheet_margin.top
+        cards = []
+        horizontal_crop_lines = Set.new
+        vertical_crop_lines = Set.new
+
+        while (
+            x + @card_iter_x < @printable_edge_right &&
+            y + @card_iter_y < @printable_edge_bottom)
+          xpos = x + @option.card_gap.horizontal
+          ypos = y + @option.card_gap.vertical
+          cards.push(
+            'x' => "#{xpos}#{@option.unit}",
+            'y' => "#{ypos}#{@option.unit}"
+          )
+
+          # Append the crop lines
+          vertical_crop_lines.add xpos
+          vertical_crop_lines.add xpos + @option.card_width
+          horizontal_crop_lines.add ypos
+          horizontal_crop_lines.add ypos + @option.card_height
+
+          # Calculate the next iterator
+          if @option.card_ordering == :rows
+            x, y = next_card_pos_row(x, y)
+          elsif @option.card_ordering == :columns
+            x, y = next_card_pos_col(x, y)
+          else
+            raise RunTimeException, 'Invalid card ordering value received'
+          end
+        end
+
+        output = {
+          'sheet_width' => "#{@option.sheet_width}#{@option.unit}",
+          'sheet_height' => "#{@option.sheet_height}#{@option.unit}",
+          'card_width' => "#{@option.card_width}#{@option.unit}",
+          'card_height' => "#{@option.card_height}#{@option.unit}",
+          'cards' => cards
+        }
+
+        if @option.crop_lines == :true
+          lines = []
+          vertical_crop_lines.each do |val|
+            lines.push(
+              'type' => :vertical, 'position' => "#{val}#{@option.unit}"
+            )
+          end
+          horizontal_crop_lines.each do |val|
+            lines.push(
+              'type' => :horizontal, 'position' => "#{val}#{@option.unit}"
+            )
+          end
+          output['crop_line'] = { 'lines' => lines }
+        end
+
+        # Return the output data
+        output
+      end
+
+      def recalculate_center_align_sheet
+        # We will still respect the user specified margins
+        printable_width = (
+          @option.sheet_width - @option.sheet_margin.left -
+          @option.sheet_margin.right)
+        num_of_cols, remainder = printable_width.divmod(@card_iter_x)
+        if (
+            @option.card_gap.horizontal > 0 &&
+            remainder < @option.card_gap.horizontal)
+          num_of_cols -= 1
+        end
+
+        new_hor_margin = (
+          (@option.sheet_width - num_of_cols * @card_iter_x -
+           @option.card_gap.horizontal) / 2)
+        Margin.new [
+          @option.sheet_margin.top,
+          new_hor_margin,
+          @option.sheet_margin.bottom
+        ]
+      end
+
+      def next_card_pos_row(x, y)
+        x += @card_iter_x
+
+        if (x + @card_iter_x) > @printable_edge_right
+          x = @option.sheet_margin.left
+          y += @card_iter_y
+        end
+
+        [x, y]
+      end
+
+      def next_card_pos_col(x, y)
+        y += @card_iter_y
+
+        if (y + @card_iter_y) > @printable_edge_bottom
+          x += @card_iter_x
+          y = @option.sheet_margin.top
+        end
+
+        [x, y]
+      end
+    end
+  end
+end