squib 0.14.2 → 0.14.3.pre1

data/samples/saves/_saves.rb

@@ -1,51 +1,51 @@
-require 'squib'
-
-# This sample demonstrates how to use the various save methods
-
-Squib::Deck.new(width: 825, height: 1125, cards: 16) do
-  background color: :gray
-  rect x: 38, y: 38, width: 750, height: 1050,
-       x_radius: 38, y_radius: 38, stroke: 3.0, dash: '4 4'
-
-  text str: (1..16).to_a, x: 220, y: 78, font: 'Arial 18'
-
-  # Here's what a regular save_png looks like for just the first card
-  save_png range: 0, prefix: 'save_png_'
-
-  # save_png supports trim and trim_radius
-  save_png trim: 30, trim_radius: 38,
-           range: 0, prefix: 'save_png_trimmed_'
-
-  # Place on multiple pages over the PDF, with bleed beeing trimmed off
-  save_pdf file: 'save-pdf.pdf', margin: 75, gap: 5, trim: 37
-
-  # PDFs also support arbitrary paper sizes, in pixels or any other supported units
-  save_pdf file: 'save-pdf-small.pdf',
-           width: '7in', height: '5in',
-           range: 0..1
-
-  # Note that our PNGs still are not trimmed even though the pdf ones were
-  save_png range: 1, prefix: 'saves_notrim_'
-
-  # We can also save our PNGs into a single sheet,
-  #  rows are calculated based on cols and number of cards
-  save_sheet prefix: 'save_single_sheet_',
-             columns: 2, margin: 75, gap: 5, trim: 37
-
-  # Or multiple sheets if rows are also specified
-  save_sheet prefix: 'save_sheet_',
-             columns: 4, rows: 2,
-             margin: 75, gap: 5, trim: 37
-
-  # Sheets support ranges too
-  save_sheet prefix: 'save_sheet_range_',
-             range: 0..5,
-             columns: 2, rows: 2,
-             margin: 75, gap: 5, trim: 37
-
-  # Sheets can arrange left-to-right and right-to-left
-  save_sheet prefix: 'save_sheet_rtl_',
-             range: 0..1, rtl: true,
-             columns: 2, rows: 1,
-             margin: 75, gap: 5, trim: 37
-end
+require 'squib'
+
+# This sample demonstrates how to use the various save methods
+
+Squib::Deck.new(width: 825, height: 1125, cards: 16) do
+  background color: :gray
+  rect x: 38, y: 38, width: 750, height: 1050,
+       x_radius: 38, y_radius: 38, stroke: 3.0, dash: '4 4'
+
+  text str: (1..16).to_a, x: 220, y: 78, font: 'Arial 18'
+
+  # Here's what a regular save_png looks like for just the first card
+  save_png range: 0, prefix: 'save_png_'
+
+  # save_png supports trim and trim_radius
+  save_png trim: 30, trim_radius: 38,
+           range: 0, prefix: 'save_png_trimmed_'
+
+  # Place on multiple pages over the PDF, with bleed beeing trimmed off
+  save_pdf file: 'save-pdf.pdf', margin: 75, gap: 5, trim: 37
+
+  # PDFs also support arbitrary paper sizes, in pixels or any other supported units
+  save_pdf file: 'save-pdf-small.pdf',
+           width: '7in', height: '5in',
+           range: 0..1
+
+  # Note that our PNGs still are not trimmed even though the pdf ones were
+  save_png range: 1, prefix: 'saves_notrim_'
+
+  # We can also save our PNGs into a single sheet,
+  #  rows are calculated based on cols and number of cards
+  save_sheet prefix: 'save_single_sheet_',
+             columns: 2, margin: 75, gap: 5, trim: 37
+
+  # Or multiple sheets if rows are also specified
+  save_sheet prefix: 'save_sheet_',
+             columns: 4, rows: 2,
+             margin: 75, gap: 5, trim: 37
+
+  # Sheets support ranges too
+  save_sheet prefix: 'save_sheet_range_',
+             range: 0..5,
+             columns: 2, rows: 2,
+             margin: 75, gap: 5, trim: 37
+
+  # Sheets can arrange left-to-right and right-to-left
+  save_sheet prefix: 'save_sheet_rtl_',
+             range: 0..1, rtl: true,
+             columns: 2, rows: 1,
+             margin: 75, gap: 5, trim: 37
+end

data/samples/saves/_showcase.rb

@@ -1,25 +1,25 @@
-require 'squib'
-
-# Showcases are a neat way to show off your cards in a modern way, using a
-# reflection and a persepctive effect to make them look 3D
-Squib::Deck.new(cards: 4) do
-  background color: '#CE534D'
-  rect fill_color: '#DED4B9', x: 78, y: 78,
-       width: '2.25in', height: '3.25in', radius: 32
-  text str: %w(Grifter Thief Thug Kingpin),
-       font: 'Helvetica,Sans weight=800 40',
-       x: 78, y: 78, width: '2.25in', align: :center
-  svg file: 'spanner.svg', x: (825 - 500) / 2, y: 500, width: 500, height: 500
-
-  # Defaults are pretty sensible.
-  showcase file: 'showcase.png'
-
-  # Here's a more complete example.
-  # Tons of ways to tweak it if you like - check the docs.
-  showcase trim: 32, trim_radius: 32, margin: 100, face: :right,
-           scale: 0.85, offset: 0.95, fill_color: :black,
-           reflect_offset: 25, reflect_strength: 0.1, reflect_percent: 0.4,
-           file: 'showcase2.png'
-
-  save_png prefix: 'showcase_individual_' # to show that they're not trimmed
-end
+require 'squib'
+
+# Showcases are a neat way to show off your cards in a modern way, using a
+# reflection and a persepctive effect to make them look 3D
+Squib::Deck.new(cards: 4) do
+  background color: '#CE534D'
+  rect fill_color: '#DED4B9', x: 78, y: 78,
+       width: '2.25in', height: '3.25in', radius: 32
+  text str: %w(Grifter Thief Thug Kingpin),
+       font: 'Helvetica,Sans weight=800 40',
+       x: 78, y: 78, width: '2.25in', align: :center
+  svg file: 'spanner.svg', x: (825 - 500) / 2, y: 500, width: 500, height: 500
+
+  # Defaults are pretty sensible.
+  showcase file: 'showcase.png'
+
+  # Here's a more complete example.
+  # Tons of ways to tweak it if you like - check the docs.
+  showcase trim: 32, trim_radius: 32, margin: 100, face: :right,
+           scale: 0.85, offset: 0.95, fill_color: :black,
+           reflect_offset: 25, reflect_strength: 0.1, reflect_percent: 0.4,
+           file: 'showcase2.png'
+
+  save_png prefix: 'showcase_individual_' # to show that they're not trimmed
+end

data/samples/shapes/_draw_shapes.rb

@@ -1,60 +1,60 @@
-require 'squib'
-
-Squib::Deck.new do
-  background color: :white
-
-  grid x: 10, y: 10, width: 50,  height: 50,  stroke_color: '#0066FF', stroke_width: 1.5, angle: 0.1
-  grid x: 10, y: 10, width: 200, height: 200, stroke_color: '#0066FF', stroke_width: 3, angle: 0.1
-
-  rect x: 305, y: 105, width: 200, height: 50, dash: '4 2'
-
-  rect x: 300, y: 300, width: 400, height: 400,
-       fill_color: :blue, stroke_color: :red, stroke_width: 50.0,
-       join: 'bevel'
-
-  rect x: 550, y: 105, width: 100, height: 100,
-       stroke_width: 5, stroke_color: :orange, angle: -0.2
-
-  ellipse x: 675, y: 105, width: 65, height: 100,
-       stroke_width: 5, stroke_color: :orange, angle: -0.2
-
-  text str: 'Shapes!' # regression test for bug 248
-
-  circle x: 450, y: 600, radius: 75,
-         fill_color: :gray, stroke_color: :green, stroke_width: 8.0
-
-  circle x: 600, y: 600, radius: 75, # partial circle
-         arc_start: 1, arc_end: 4, arc_direction: :counter_clockwise,
-         fill_color: :gray, stroke_color: :green, stroke_width: 8.0
-
-  triangle x1: 50, y1: 50,
-           x2: 150, y2: 150,
-           x3: 75, y3: 250,
-           fill_color: :gray, stroke_color: :green, stroke_width: 3.0
-
-  line x1: 50, y1: 550,
-       x2: 150, y2: 650,
-       stroke_width: 25.0
-
-  curve x1: 50,  y1: 850, cx1: 150, cy1: 700,
-        x2: 625, y2: 900, cx2: 150, cy2: 700,
-        stroke_width: 12.0, stroke_color: :cyan,
-        fill_color: :burgundy, cap: 'round'
-
-  ellipse x: 50, y: 925, width: 200, height: 100,
-          stroke_width: 5.0, stroke_color: :cyan,
-          fill_color: :burgundy
-
-  star x: 300, y: 1000, n: 5, inner_radius: 15, outer_radius: 40,
-       fill_color: :cyan, stroke_color: :burgundy, stroke_width: 5
-
-  # default draw is fill-then-stroke. Can be changed to stroke-then-fill
-  star x: 375, y: 1000, n: 5, inner_radius: 15, outer_radius: 40,
-       fill_color: :cyan, stroke_color: :burgundy,
-       stroke_width: 5, stroke_strategy: :stroke_first
-
-  polygon x: 500, y: 1000, n: 5, radius: 25, angle: Math::PI / 2,
-          fill_color: :cyan, stroke_color: :burgundy, stroke_width: 2
-
-  save_png prefix: 'shape_'
-end
+require 'squib'
+
+Squib::Deck.new do
+  background color: :white
+
+  grid x: 10, y: 10, width: 50,  height: 50,  stroke_color: '#0066FF', stroke_width: 1.5, angle: 0.1
+  grid x: 10, y: 10, width: 200, height: 200, stroke_color: '#0066FF', stroke_width: 3, angle: 0.1
+
+  rect x: 305, y: 105, width: 200, height: 50, dash: '4 2'
+
+  rect x: 300, y: 300, width: 400, height: 400,
+       fill_color: :blue, stroke_color: :red, stroke_width: 50.0,
+       join: 'bevel'
+
+  rect x: 550, y: 105, width: 100, height: 100,
+       stroke_width: 5, stroke_color: :orange, angle: -0.2
+
+  ellipse x: 675, y: 105, width: 65, height: 100,
+       stroke_width: 5, stroke_color: :orange, angle: -0.2
+
+  text str: 'Shapes!' # regression test for bug 248
+
+  circle x: 450, y: 600, radius: 75,
+         fill_color: :gray, stroke_color: :green, stroke_width: 8.0
+
+  circle x: 600, y: 600, radius: 75, # partial circle
+         arc_start: 1, arc_end: 4, arc_direction: :counter_clockwise,
+         fill_color: :gray, stroke_color: :green, stroke_width: 8.0
+
+  triangle x1: 50, y1: 50,
+           x2: 150, y2: 150,
+           x3: 75, y3: 250,
+           fill_color: :gray, stroke_color: :green, stroke_width: 3.0
+
+  line x1: 50, y1: 550,
+       x2: 150, y2: 650,
+       stroke_width: 25.0
+
+  curve x1: 50,  y1: 850, cx1: 150, cy1: 700,
+        x2: 625, y2: 900, cx2: 150, cy2: 700,
+        stroke_width: 12.0, stroke_color: :cyan,
+        fill_color: :burgundy, cap: 'round'
+
+  ellipse x: 50, y: 925, width: 200, height: 100,
+          stroke_width: 5.0, stroke_color: :cyan,
+          fill_color: :burgundy
+
+  star x: 300, y: 1000, n: 5, inner_radius: 15, outer_radius: 40,
+       fill_color: :cyan, stroke_color: :burgundy, stroke_width: 5
+
+  # default draw is fill-then-stroke. Can be changed to stroke-then-fill
+  star x: 375, y: 1000, n: 5, inner_radius: 15, outer_radius: 40,
+       fill_color: :cyan, stroke_color: :burgundy,
+       stroke_width: 5, stroke_strategy: :stroke_first
+
+  polygon x: 500, y: 1000, n: 5, radius: 25, angle: Math::PI / 2,
+          fill_color: :cyan, stroke_color: :burgundy, stroke_width: 2
+
+  save_png prefix: 'shape_'
+end

data/samples/shapes/_proofs.rb

@@ -1,22 +1,22 @@
-require 'squib'
-
-Squib::Deck.new do
-  background color: :white
-  safe_zone # defaults TheGameCrafter 0.25in around the edge, rounded corners
-  cut_zone  # defaults TheGameCrafter 0.125in around the edge
-
-  text str: 'Poker card with proof lines', x: '0.25in', y: '0.25in'
-  save_png prefix: 'proof_poker_'
-end
-
-
-Squib::Deck.new(width:'2in', height: '1in')do
-  background color: :white
-  safe_zone stroke_color: :purple, margin: '0.1in'
-  cut_zone stroke_color: :purple, margin: '0.05in'
-
-  text str: 'Small card with proof lines', x: '0.1in', y: '0.1in',
-       font: 'Arial 10'
-
-  save_png prefix: 'proof_tiny_'
-end
+require 'squib'
+
+Squib::Deck.new do
+  background color: :white
+  safe_zone # defaults TheGameCrafter 0.25in around the edge, rounded corners
+  cut_zone  # defaults TheGameCrafter 0.125in around the edge
+
+  text str: 'Poker card with proof lines', x: '0.25in', y: '0.25in'
+  save_png prefix: 'proof_poker_'
+end
+
+
+Squib::Deck.new(width:'2in', height: '1in')do
+  background color: :white
+  safe_zone stroke_color: :purple, margin: '0.1in'
+  cut_zone stroke_color: :purple, margin: '0.05in'
+
+  text str: 'Small card with proof lines', x: '0.1in', y: '0.1in',
+       font: 'Arial 10'
+
+  save_png prefix: 'proof_tiny_'
+end

data/samples/sprues/_advanced_sprues.rb

@@ -1,24 +1,24 @@
-require 'squib'
-
-# This is a more advanced example of Sprues
-# (mostly so we can have a torturous regression test)
-#  - Uses a custom sprue
-#  - Weird rotations
-#  - Center-positioned
-#  - Multiple pages
-Squib::Deck.new(cards: 6, width: '2.2in', height: '2.1in') do
-  background color: :blue #blue never shows up! Yay clipping...
-  rect stroke_width: 5, stroke_color: :red, fill_color: :salmon
-  cut_zone margin: '0.125in',
-           stroke_width: 2, stroke_color: :purple
-
-  circle x: width/2, y: height/2, radius: 20 # midpoint
-
-  text str: (0..9).map{ |i| "Card #{i}\n\n" },
-       font: 'Sans 32', align: :center, valign: :middle,
-       height: :deck, width: :deck
-  
-  save_sheet sprue: 'my_sprues/weird_sprue.yml',
-             trim: '0.2in', trim_radius: '10pt',
-             prefix: "advanced_sprues_"
-end
+require 'squib'
+
+# This is a more advanced example of Sprues
+# (mostly so we can have a torturous regression test)
+#  - Uses a custom sprue
+#  - Weird rotations
+#  - Center-positioned
+#  - Multiple pages
+Squib::Deck.new(cards: 6, width: '2.2in', height: '2.1in') do
+  background color: :blue #blue never shows up! Yay clipping...
+  rect stroke_width: 5, stroke_color: :red, fill_color: :salmon
+  cut_zone margin: '0.125in',
+           stroke_width: 2, stroke_color: :purple
+
+  circle x: width/2, y: height/2, radius: 20 # midpoint
+
+  text str: (0..9).map{ |i| "Card #{i}\n\n" },
+       font: 'Sans 32', align: :center, valign: :middle,
+       height: :deck, width: :deck
+  
+  save_sheet sprue: 'my_sprues/weird_sprue.yml',
+             trim: '0.2in', trim_radius: '10pt',
+             prefix: "advanced_sprues_"
+end

data/samples/sprues/_builtin_sprues.rb

@@ -1,21 +1,21 @@
-require 'squib'
-
-Squib::Deck.new(width: '50mm', height: '70mm', cards: 9) do
-  background color: :white
-  rect stroke_width: 5, stroke_color: :red
-  text str: (0..9).map{ |i| "Card! #{i}\n50x77mm" },
-       font: 'Sans 32', align: :center, valign: :middle,
-       height: :deck, width: :deck
-
-  %w(
-    a4_poker_card_8up.yml
-    a4_euro_card.yml
-    a4_poker_card_9up.yml
-    a4_usa_card.yml
-    letter_poker_card_9up.yml
-    printplaygames_18up.yml
-    drivethrucards_1up.yml
-  ).each do |builtin|
-    save_sheet sprue: builtin, prefix: "sprue_#{builtin}_"
-  end
-end
+require 'squib'
+
+Squib::Deck.new(width: '50mm', height: '70mm', cards: 9) do
+  background color: :white
+  rect stroke_width: 5, stroke_color: :red
+  text str: (0..9).map{ |i| "Card! #{i}\n50x77mm" },
+       font: 'Sans 32', align: :center, valign: :middle,
+       height: :deck, width: :deck
+
+  %w(
+    a4_poker_card_8up.yml
+    a4_euro_card.yml
+    a4_poker_card_9up.yml
+    a4_usa_card.yml
+    letter_poker_card_9up.yml
+    printplaygames_18up.yml
+    drivethrucards_1up.yml
+  ).each do |builtin|
+    save_sheet sprue: builtin, prefix: "sprue_#{builtin}_"
+  end
+end

data/samples/sprues/_fold_sheet.rb

@@ -1,27 +1,27 @@
-require 'squib'
-
-# Note that this sample has no bleed - you might want to have bleed
-# but tighter than usual: 0.1 instead of 0.125in since this sprue is
-# crowded horizontally on US letter
-Squib::Deck.new(width: '2.5in', height: '3.5in', cards: 8) do
-  background color: :white
-  rect stroke_width: 5, stroke_color: :red
-  # Note that we are interleaving strings
-  # This could be used as a secondary Squib script that loads
-  # Squib-generated individual images
-  strings = [
-    "Front 1",
-    "Back 1",
-    "Front 2",
-    "Back 2",
-    "Front 3",
-    "Back 3",
-    "Front 4",
-    "Back 4",
-  ]
-
-  text str: strings,font: 'Sans 32', align: :center, valign: :middle,
-       height: :deck, width: :deck
-  save_sheet prefix: 'foldable_',
-             sprue: 'letter_poker_foldable_8up.yml'
-end
+require 'squib'
+
+# Note that this sample has no bleed - you might want to have bleed
+# but tighter than usual: 0.1 instead of 0.125in since this sprue is
+# crowded horizontally on US letter
+Squib::Deck.new(width: '2.5in', height: '3.5in', cards: 8) do
+  background color: :white
+  rect stroke_width: 5, stroke_color: :red
+  # Note that we are interleaving strings
+  # This could be used as a secondary Squib script that loads
+  # Squib-generated individual images
+  strings = [
+    "Front 1",
+    "Back 1",
+    "Front 2",
+    "Back 2",
+    "Front 3",
+    "Back 3",
+    "Front 4",
+    "Back 4",
+  ]
+
+  text str: strings,font: 'Sans 32', align: :center, valign: :middle,
+       height: :deck, width: :deck
+  save_sheet prefix: 'foldable_',
+             sprue: 'letter_poker_foldable_8up.yml'
+end