squib 0.12.0 → 0.13.0

data/spec/args/sheet_spec.rb

@@ -1,80 +0,0 @@
-require 'spec_helper'
-require 'squib/args/sheet'
-
-describe Squib::Args::Sheet do
-
-  context 'dsl overrides' do
-    subject(:sheet) { Squib::Args::Sheet.new({}, { file: 'foo' }) }
-
-    it 'works when specified' do
-      sheet.load!({}) # go right to defaults
-      expect(sheet.file).to eq('foo') # dsl method default override
-    end
-
-  end
-
-  context 'rows and colums' do
-    subject(:sheet) { Squib::Args::Sheet.new({}, {}, 4) }
-
-    it 'does nothing on a perfect fit' do
-      opts = { columns: 2, rows: 2 }
-      sheet.load! opts
-      expect(sheet).to have_attributes(columns: 2, rows: 2)
-    end
-
-    it 'keeps both if specified' do
-      opts = { columns: 1, rows: 1 }
-      sheet.load! opts
-      expect(sheet).to have_attributes(columns: 1, rows: 1)
-    end
-
-    it 'computes properly on non-integer' do
-      opts = { columns: 1, rows: :infinite }
-      sheet.load! opts
-      expect(sheet).to have_attributes(columns: 1, rows: 4)
-    end
-
-    it 'computes properly on unspecified rows' do
-      opts = { columns: 1 }
-      sheet.load! opts
-      expect(sheet).to have_attributes(columns: 1, rows: 4)
-    end
-
-    it 'computes properly on unspecified, too-big column' do
-      opts = {}
-      sheet.load! opts
-      expect(sheet).to have_attributes(columns: 5, rows: 1)
-    end
-
-    it 'fails on a non-integer column' do
-      opts = { columns: :infinite }
-      expect { sheet.load!(opts) }.to raise_error('columns must be an integer')
-    end
-  end
-
-  context 'crop marks' do
-    subject(:sheet) { Squib::Args::Sheet.new({}, {}, 4) }
-
-    it 'computes crop marks properly' do
-      opts = {
-        width: 1000,
-        height: 1100,
-        trim: 10,
-        crop_margin_top: 20,
-        crop_margin_left: 30,
-        crop_margin_right: 40,
-        crop_margin_bottom: 50,
-      }
-      expect(sheet.load!(opts).crop_coords(3,4, 300, 400)).to eq(
-        [ {:x1=>43, :y1=>0, :x2=>43, :y2=>74},
-          {:x1=>253, :y1=>0, :x2=>253, :y2=>74},
-          {:x1=>43, :y1=>1100, :x2=>43, :y2=>1026},
-          {:x1=>253, :y1=>1100, :x2=>253, :y2=>1026},
-          {:x1=>0, :y1=>34, :x2=>74, :y2=>34},
-          {:x1=>1000, :y1=>34, :x2=>926, :y2=>34},
-          {:x1=>0, :y1=>344, :x2=>74, :y2=>344},
-          {:x1=>1000, :y1=>344, :x2=>926, :y2=>344}]
-      )
-    end
-  end
-end

data/spec/args/showcase_special_spec.rb

@@ -1,15 +0,0 @@
-require 'spec_helper'
-require 'squib/args/showcase_special'
-
-describe Squib::Args::ShowcaseSpecial do
-  subject(:showcase_special) { Squib::Args::ShowcaseSpecial.new }
-
-  context '#face_right?' do
-    it 'compares face to right' do
-      opts = { face: 'LEFT ' }
-      showcase_special.load! opts
-      expect(showcase_special.face_right?).to be false
-    end
-  end
-
-end

data/spec/args/transform_spec.rb

@@ -1,25 +0,0 @@
-require 'spec_helper'
-require 'squib/args/transform'
-
-describe Squib::Args::Box do
-  subject(:trans) { Squib::Args::Transform.new }
-  let(:expected_defaults) { { x: [0], y: [0], crop_width: [:native], crop_height: [:native] } }
-
-  context 'validation' do
-    it 'replaces with deck width and height' do
-      args  = { crop_width: :deck, crop_height: :deck }
-      deck  = OpenStruct.new(width: 123, height: 456)
-      trans = Squib::Args::Transform.new(deck)
-      trans.load!(args, expand_by: 1)
-      expect(trans).to have_attributes(crop_width: [123], crop_height: [456])
-    end
-
-    it 'has radius override x_radius and y_radius' do
-      args = { crop_corner_x_radius: 1, crop_corner_y_radius: 2, crop_corner_radius: 3 }
-      trans.load!(args, expand_by: 2)
-      expect(trans).to have_attributes(crop_corner_x_radius: [3, 3], crop_corner_y_radius: [3, 3])
-    end
-
-  end
-
-end

data/spec/args/typographer_spec.rb

@@ -1,71 +0,0 @@
-require 'spec_helper'
-require 'squib/args/typographer'
-
-describe Squib::Args::Typographer do
-  subject(:t) { Squib::Args::Typographer.new }
-
-  it 'does nothing on a non-quoted string' do
-    expect(t.process(%{nothing})).to eq(%{nothing})
-  end
-
-  it 'left quotes at the beginning' do
-    expect(t.process(%{"foo})).to eq(%{\u201Cfoo})
-  end
-
-  it 'left quotes in the middle of the string' do
-    expect(t.process(%{hello "foo})).to eq(%{hello \u201Cfoo})
-  end
-
-  it 'right quotes at the end' do
-    expect(t.process(%{foo"})).to eq(%{foo\u201D})
-  end
-
-  it 'handles the entire string quoted' do
-    expect(t.process(%{"foo"})).to eq(%{\u201Cfoo\u201D})
-  end
-
-  it 'quotes in the middle of the string' do
-    expect(t.process(%{hello "foo" world})).to eq(%{hello \u201Cfoo\u201D world})
-  end
-
-  it 'single left quotes at the beginning' do
-    expect(t.process(%{'foo})).to eq(%{\u2018foo})
-  end
-
-  it 'single right quotes at the end' do
-    expect(t.process(%{foo'})).to eq(%{foo\u2019})
-  end
-
-  it 'single quotes in the middle' do
-    expect(t.process(%{a 'foo' bar})).to eq(%{a \u2018foo\u2019 bar})
-  end
-
-  it 'handles apostraphes' do
-    expect(t.process(%{can't})).to eq(%{can\u2019t})
-  end
-
-it 'single quotes inside double quotes' do
-    expect(t.process(%{"'I can't do that', he said"})).to eq(%{\u201C\u2018I can\u2019t do that\u2019, he said\u201D})
-  end
-
-  it 'replaces the straightforward ones' do
-    expect(t.process(%{``hi...'' -- ---})).to eq(%{\u201Chi\u2026\u201D \u2013 \u2014})
-  end
-
-  it 'does nothing on lone quotes' do
-    expect(t.process(%{"})).to eq(%{"})
-    expect(t.process(%{'})).to eq(%{'})
-  end
-
-  it 'ignores stuff in <tags>' do
-    expect(t.process(%{<span weight="bold">"can't"</span>})).to eq(%{<span weight="bold">\u201Ccan\u2019t\u201D</span>})
-  end
-
-
-  context 'configured' do
-    # TODO
-  end
-
-
-
-end

data/spec/args/unit_conversion_spec.rb

@@ -1,29 +0,0 @@
-require 'spec_helper'
-require 'squib/args/unit_conversion'
-
-describe Squib::Args::UnitConversion do
-
-  it 'does nothing on just numbers'  do
-    expect(subject.parse(20)).to eq(20)
-  end
-
-  it 'strips trailing whitespace' do
-    expect(subject.parse('1in ')).to eq(300)
-  end
-
-  it 'is ok w/internal whitesapce' do
-    expect(subject.parse('1 in')).to eq(300)
-  end
-
-  it 'does cm' do
-    expect(subject.parse('1cm')).to eq(118.1102361)
-    expect(subject.parse('1cm  ')).to eq(118.1102361)
-  end
-
-  it 'does mm' do
-    expect(subject.parse('1mm')).to eq(11.81102361)
-    expect(subject.parse('1mm  ')).to eq(11.81102361)
-  end
-
-
-end

data/spec/card_spec.rb

@@ -1,11 +0,0 @@
-require 'spec_helper'
-require 'squib/card'
-
-describe Squib::Card do
-  it 'logs fatal for unknown backend' do
-    deck = OpenStruct.new(dir: '.', prefix: '', count_format: '%02d', backend: 'broken robots')
-
-    expect(Squib::logger).to receive(:fatal).with("Back end not recognized: 'broken robots'")
-    expect { Squib::Card.new(deck, 100, 100, 0) }.to raise_error SystemExit
-  end
-end

data/spec/commands/new_spec.rb

@@ -1,48 +0,0 @@
-require 'spec_helper'
-require 'squib'
-
-describe Squib::Commands::New do
-
-  describe '#process' do
-    before(:all) do
-      @old_stderr = $stderr
-      $stderr = StringIO.new
-      @oldpwd = Dir.pwd
-      Dir.chdir(output_dir)
-    end
-
-    before(:each) do
-      FileUtils.rm_rf('foo', secure: true)
-      @cmd = Squib::Commands::New.new
-    end
-
-    it 'raises an error if no directory was specified' do
-      expect{@cmd.process([])}.to raise_error(ArgumentError, 'Please specify a path.')
-    end
-
-    it 'creates a new template on an fresh directory' do
-      @cmd.process(['foo'])
-      expect(File.exists?('foo/deck.rb')).to be true
-    end
-
-    it 'creates a new template on an empty directory' do
-      Dir.mkdir('foo')
-      @cmd.process(['foo'])
-      expect(File.exists?('foo/deck.rb')).to be true
-    end
-
-    it 'does not create a new template on an empty ' do
-      Dir.mkdir('foo')
-      File.new('foo/somefile.txt', 'w+')
-      @cmd.process(['foo'])
-      $stderr.rewind
-      expect($stderr.string.chomp).to end_with ' exists and is not empty. Doing nothing and quitting.'
-    end
-
-    after(:all) do
-      $stderr = @old_stderr
-      Dir.chdir(@oldpwd)
-    end
-  end
-
-end

data/spec/conf_spec.rb

@@ -1,47 +0,0 @@
-require 'squib'
-require 'spec_helper'
-
-describe Squib::Conf do
-
-  it 'parses the project template file just fine' do
-    conf = Squib::Conf.load project_template('config.yml')
-    expect(conf.backend).to eq(Squib::Conf::DEFAULTS['backend'])
-  end
-
-  it 'parses an empty file' do
-    conf = Squib::Conf.load conf('empty.yml')
-    expect(conf.backend).to eq(Squib::Conf::DEFAULTS['backend'])
-  end
-
-  it 'parses the sample custom config' do
-    conf = Squib::Conf.load sample_file('custom-config.yml')
-    expect(conf.progress_bars).to  be true
-    expect(conf.text_hint).to      eq '#FF0000'
-    expect(conf.custom_colors).to  eq({ 'foo' => '#ccc' })
-    expect(conf.img_dir).to        eq 'customconfig-imgdir'
-  end
-
-  it 'normalizes antialias automatically' do
-    expect(Squib::Conf::DEFAULTS['antialias']).to eq 'best'
-    expect(Squib::Conf.new.antialias).to          eq 'subpixel'
-  end
-
-  it 'warns when the yml has an unrecognized option' do
-    expect(Squib::logger).to receive(:warn).with('Unrecognized configuration option(s): unicorns')
-    Squib::Conf.load conf('unrecognized.yml')
-  end
-
-  it 'helps Andy get full coverage with a test on to_s' do
-    conf = Squib::Conf.load conf('empty.yml')
-    expect(conf.to_s).to start_with 'Conf: '
-  end
-
-  it 'allows Squib.configure to override yml' do
-    Squib.configure img_dir: 'color'
-    c = Squib::Conf.load conf('basic.yml')
-    expect(c.img_dir).to eq 'color'
-    # reset our state to be nice
-    Squib::USER_CONFIG.clear
-  end
-
-end

data/spec/data/conf/basic.yml

@@ -1 +0,0 @@
-img_dir: bw

data/spec/data/conf/empty.yml

@@ -1 +0,0 @@
-# Intentionally empty

data/spec/data/conf/unrecognized.yml

@@ -1,4 +0,0 @@
-# This is recognized, so it should be fine.
-backend: svg
-# This is not recognized.
-unicorns: true

data/spec/data/csv/basic.csv

@@ -1,3 +0,0 @@
-h1,h2
-1,2
-3,4

data/spec/data/csv/custom_opts.csv

@@ -1,2 +0,0 @@
-x-y
-p-|q-r|

data/spec/data/csv/dup_cols.csv

@@ -1,3 +0,0 @@
-h1,h1,h2,H2,h3
-1,2,5,6,9
-3,4,7,8,10

data/spec/data/csv/newline.csv

@@ -1,3 +0,0 @@
-title,level,notes
-Foo,1,"a
-b"

data/spec/data/csv/qty.csv

@@ -1,3 +0,0 @@
-Name,Qty
-Ha, 3
-Ho, 1

data/spec/data/csv/qty_named.csv

@@ -1,3 +0,0 @@
-Name,Quantity
-Ha, 3
-Ho, 1

data/spec/data/csv/with_spaces.csv

@@ -1,3 +0,0 @@
-  With Spaces  ,h2,h3
-a b c      , 2,3
-3          ,4

data/spec/data/csv/yield.csv

@@ -1,3 +0,0 @@
-a,b
-foo%nbar,1
-1,blah%n

data/spec/data/layouts/easy-circular-extends.yml

@@ -1,6 +0,0 @@
-a:
-  extends: b
-  x: 50
-b:
-  extends: a
-  x: 150

data/spec/data/layouts/empty-rule.yml

@@ -1 +0,0 @@
-empty: #no rules actually set

data/spec/data/layouts/empty.yml

@@ -1 +0,0 @@
-# testing for an empty yaml file here

data/spec/data/layouts/extends-nonexists.yml

@@ -1,3 +0,0 @@
-verbal:
-  extends: kaisersoze
-  font_size: 25

data/spec/data/layouts/extends-units-mixed.yml

@@ -1,8 +0,0 @@
-parent:
-  x: 0.5in
-  y: 1in
-
-child:
-  extends: parent
-  x: += 1in
-  y: -= 0.5in

data/spec/data/layouts/extends-units.yml

@@ -1,8 +0,0 @@
-parent:
-  x: 0.5in
-  y: 1in
-
-child:
-  extends: parent
-  x: += 1in
-  y: -= 0.5in

data/spec/data/layouts/hard-circular-extends.yml

@@ -1,9 +0,0 @@
-a:
-  extends: c
-  x: 50
-b:
-  extends: a
-  x: 150
-c:
-  extends: b
-  y: 250

data/spec/data/layouts/multi-extends-single-entry.yml

@@ -1,14 +0,0 @@
-aunt:
-  a: 101
-  b: 102
-  c: 103
-uncle:
-  x: 104
-  y: 105
-  b: 106
-child:
-  extends:
-    - uncle
-    - aunt
-  a: 107
-  x: 108