sqlite-ruby 2.2.1-mswin32 → 2.2.2-mswin32

data/test/lib/sqlite/resultset.rb

@@ -1,168 +0,0 @@
-#--
-# =============================================================================
-# Copyright (c) 2004, Jamis Buck (jgb3@email.byu.edu)
-# All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-# 
-#     * Redistributions of source code must retain the above copyright notice,
-#       this list of conditions and the following disclaimer.
-# 
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in the
-#       documentation and/or other materials provided with the distribution.
-# 
-#     * The names of its contributors may not be used to endorse or promote
-#       products derived from this software without specific prior written
-#       permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
-# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# =============================================================================
-#++
-
-require 'sqlite_api'
-
-module SQLite
-
-  # The ResultSet object encapsulates the enumerability of a query's output.
-  # It is a simple cursor over the data that the query returns. It will
-  # very rarely (if ever) be instantiated directly. Instead, client's should
-  # obtain a ResultSet instance via Statement#execute.
-  class ResultSet
-    include Enumerable
-
-    # A trivial module for adding a +types+ accessor to an object.
-    module TypesContainer
-      attr_accessor :types
-    end
-
-    # A trivial module for adding a +fields+ accessor to an object.
-    module FieldsContainer
-      attr_accessor :fields
-    end
-
-    # An array of the column names for this result set (may be empty)
-    attr_reader :columns
-
-    # An array of the column types for this result set (may be empty)
-    attr_reader :types
-
-    # Create a new ResultSet attached to the given database, using the
-    # given sql text.
-    def initialize( db, sql )
-      @db = db
-      @sql = sql
-      commence
-    end
-
-    # A convenience method for compiling the virtual machine and stepping
-    # to the first row of the result set.
-    def commence
-      @vm, = API.compile( @db.handle, @sql )
-
-      @current_row = API.step( @vm )
-
-      @columns = @current_row[ :columns ]
-      @types = @current_row[ :types ]
-
-      check_eof( @current_row )
-    end
-    private :commence
-
-    # A convenience method for checking for EOF.
-    def check_eof( row )
-      @eof = !row.has_key?( :row )
-    end
-    private :check_eof
-
-    # Close the result set. Attempting to perform any operation (including
-    # #close) on a closed result set will have undefined results.
-    def close
-      API.finalize( @vm )
-    end
-
-    # Reset the cursor, so that a result set which has reached end-of-file
-    # can be rewound and reiterated. _Note_: this uses an experimental API,
-    # which is subject to change. Use at your own risk.
-    def reset
-      API.finalize( @vm )
-      commence
-      @eof = false
-    end
-
-    # Query whether the cursor has reached the end of the result set or not.
-    def eof?
-      @eof
-    end
-
-    # Obtain the next row from the cursor. If there are no more rows to be
-    # had, this will return +nil+. If type translation is active on the
-    # corresponding database, the values in the row will be translated
-    # according to their types.
-    #
-    # The returned value will be an array, unless Database#results_as_hash has
-    # been set to +true+, in which case the returned value will be a hash.
-    #
-    # For arrays, the column names are accessible via the +fields+ property,
-    # and the column types are accessible via the +types+ property.
-    #
-    # For hashes, the column names are the keys of the hash, and the column
-    # types are accessible via the +types+ property.
-    def next
-      return nil if @eof
-
-      if @current_row
-        result, @current_row = @current_row, nil
-      else
-        result = API.step( @vm )
-        check_eof( result )
-      end
-
-      unless @eof
-        row = result[:row]
-
-        if @db.type_translation
-          row = @types.zip( row ).map do |type, value|
-            @db.translator.translate( type, value )
-          end
-        end
-
-        if @db.results_as_hash
-          new_row = Hash[ *( @columns.zip( row ).flatten ) ]
-          row.each_with_index { |value,idx| new_row[idx] = value }
-          row = new_row
-        else
-          row.extend FieldsContainer unless row.respond_to?(:fields)
-          row.fields = @columns
-        end
-
-        row.extend TypesContainer
-        row.types = @types
-
-        return row
-      end
-
-      nil
-    end
-
-    # Required by the Enumerable mixin. Provides an internal iterator over the
-    # rows of the result set.
-    def each
-      while row=self.next
-        yield row
-      end
-    end
-
-  end
-
-end

data/test/lib/sqlite/statement.rb

@@ -1,177 +0,0 @@
-#--
-# =============================================================================
-# Copyright (c) 2004, Jamis Buck (jgb3@email.byu.edu)
-# All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-# 
-#     * Redistributions of source code must retain the above copyright notice,
-#       this list of conditions and the following disclaimer.
-# 
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in the
-#       documentation and/or other materials provided with the distribution.
-# 
-#     * The names of its contributors may not be used to endorse or promote
-#       products derived from this software without specific prior written
-#       permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
-# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# =============================================================================
-#++
-
-require 'sqlite_api'
-require 'sqlite/resultset'
-require 'sqlite/parsed_statement'
-
-module SQLite
-
-  # A statement represents a prepared-but-unexecuted SQL query. It will rarely
-  # (if ever) be instantiated directly by a client, and is most often obtained
-  # via the Database#prepare method.
-  class Statement
-
-    # This is any text that followed the first valid SQL statement in the text
-    # with which the statement was initialized. If there was no trailing text,
-    # this will be the empty string.
-    attr_reader :remainder
-
-    # Create a new statement attached to the given Database instance, and which
-    # encapsulates the given SQL text. If the text contains more than one
-    # statement (i.e., separated by semicolons), then the #remainder property
-    # will be set to the trailing text.
-    def initialize( db, sql )
-      @db = db
-      @statement = ParsedStatement.new( sql )
-      @remainder = @statement.trailing.strip
-      @sql = @statement.to_s
-    end
-
-    # Binds the given variables to the corresponding placeholders in the SQL
-    # text.
-    #
-    # See Database#execute for a description of the valid placeholder
-    # syntaxes.
-    #
-    # Example:
-    #
-    #   stmt = db.prepare( "select * from table where a=? and b=?" )
-    #   stmt.bind_params( 15, "hello" )
-    #
-    # See also #execute, #bind_param, Statement#bind_param, and
-    # Statement#bind_params.
-    def bind_params( *bind_vars )
-      @statement.bind_params( *bind_vars )
-    end
-
-    # Binds value to the named (or positional) placeholder. If +param+ is a
-    # Fixnum, it is treated as an index for a positional placeholder.
-    # Otherwise it is used as the name of the placeholder to bind to.
-    #
-    # See also #bind_params.
-    def bind_param( param, value )
-      @statement.bind_param( param, value )
-    end
-
-    # Execute the statement. This creates a new ResultSet object for the
-    # statement's virtual machine. If a block was given, the new ResultSet will
-    # be yielded to it and then closed; otherwise, the ResultSet will be
-    # returned. In that case, it is the client's responsibility to close the
-    # ResultSet.
-    #
-    # Any parameters will be bound to the statement using #bind_params.
-    #
-    # Example:
-    #
-    #   stmt = db.prepare( "select * from table" )
-    #   stmt.execute do |result|
-    #     ...
-    #   end
-    #
-    # See also #bind_params, #execute!.
-    def execute( *bind_vars )
-      bind_params *bind_vars unless bind_vars.empty?
-      results = ResultSet.new( @db, @statement.to_s )
-
-      if block_given?
-        begin
-          yield results
-        ensure
-          results.close
-        end
-      else
-        return results
-      end
-    end
-
-    # Execute the statement. If no block was given, this returns an array of
-    # rows returned by executing the statement. Otherwise, each row will be
-    # yielded to the block and then closed.
-    #
-    # Any parameters will be bound to the statement using #bind_params.
-    #
-    # Example:
-    #
-    #   stmt = db.prepare( "select * from table" )
-    #   stmt.execute! do |row|
-    #     ...
-    #   end
-    #
-    # See also #bind_params, #execute.
-    def execute!( *bind_vars )
-      result = execute( *bind_vars )
-      rows = [] unless block_given?
-      while row = result.next
-        if block_given?
-          yield row
-        else
-          rows << row
-        end
-      end
-      rows
-    ensure
-      result.close if result
-    end
-
-    # Return an array of the column names for this statement. Note that this
-    # may execute the statement in order to obtain the metadata; this makes it
-    # a (potentially) expensive operation.
-    def columns
-      get_metadata unless @columns
-      return @columns
-    end
-
-    # Return an array of the data types for each column in this statement. Note
-    # that this may execute the statement in order to obtain the metadata; this
-    # makes it a (potentially) expensive operation.
-    def types
-      get_metadata unless @types
-      return @types
-    end
-
-    # A convenience method for obtaining the metadata about the query. Note
-    # that this will actually execute the SQL, which means it can be a
-    # (potentially) expensive operation.
-    def get_metadata
-      vm, rest = API.compile( @db.handle, @statement.to_s )
-      result = API.step( vm )
-      API.finalize( vm )
-
-      @columns = result[:columns]
-      @types = result[:types]
-    end
-    private :get_metadata
-
-  end
-
-end

data/test/lib/sqlite/translator.rb

@@ -1,135 +0,0 @@
-#--
-# =============================================================================
-# Copyright (c) 2004, Jamis Buck (jgb3@email.byu.edu)
-# All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-# 
-#     * Redistributions of source code must retain the above copyright notice,
-#       this list of conditions and the following disclaimer.
-# 
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in the
-#       documentation and/or other materials provided with the distribution.
-# 
-#     * The names of its contributors may not be used to endorse or promote
-#       products derived from this software without specific prior written
-#       permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
-# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# =============================================================================
-#++
-
-require 'time'
-
-module SQLite
-
-  # The Translator class encapsulates the logic and callbacks necessary for
-  # converting string data to a value of some specified type. Every Database
-  # instance may have a Translator instance, in order to assist in type
-  # translation (Database#type_translation).
-  #
-  # Further, applications may define their own custom type translation logic
-  # by registering translator blocks with the corresponding database's
-  # translator instance (Database#translator).
-  class Translator
-
-    # Create a new Translator instance. It will be preinitialized with default
-    # translators for most SQL data types.
-    def initialize
-      @translators = Hash.new( proc { |type,value| value } )
-      register_default_translators
-    end
-
-    # Add a new translator block, which will be invoked to process type
-    # translations to the given type. The type should be an SQL datatype, and
-    # may include parentheses (i.e., "VARCHAR(30)"). However, any parenthetical
-    # information is stripped off and discarded, so type translation decisions
-    # are made solely on the "base" type name.
-    #
-    # The translator block itself should accept two parameters, "type" and
-    # "value". In this case, the "type" is the full type name (including
-    # parentheses), so the block itself may include logic for changing how a
-    # type is translated based on the additional data. The "value" parameter
-    # is the (string) data to convert.
-    #
-    # The block should return the translated value.
-    def add_translator( type, &block ) # :yields: type, value
-      @translators[ type_name( type ) ] = block
-    end
-
-    # Translate the given string value to a value of the given type. In the
-    # absense of an installed translator block for the given type, the value
-    # itself is always returned. Further, +nil+ values are never translated,
-    # and are always passed straight through regardless of the type parameter.
-    def translate( type, value )
-      unless value.nil?
-        @translators[ type_name( type ) ].call( type, value )
-      end
-    end
-
-    # A convenience method for working with type names. This returns the "base"
-    # type name, without any parenthetical data.
-    def type_name( type )
-      type = $1 if type =~ /^(.*?)\(/
-      type.upcase
-    end
-    private :type_name
-
-    # Register the default translators for the current Translator instance.
-    # This includes translators for most major SQL data types.
-    def register_default_translators
-      [ "date",
-        "datetime",
-        "time" ].each { |type| add_translator( type ) { |t,v| Time.parse( v ) } }
-
-      [ "decimal",
-        "float",
-        "numeric",
-        "double",
-        "real",
-        "dec",
-        "fixed" ].each { |type| add_translator( type ) { |t,v| v.to_f } }
-
-      [ "integer",
-        "smallint",
-        "mediumint",
-        "int",
-        "bigint" ].each { |type| add_translator( type ) { |t,v| v.to_i } }
-
-      [ "bit",
-        "bool",
-        "boolean" ].each do |type|
-        add_translator( type ) do |t,v|
-          !( v.strip.gsub(/00+/,"0") == "0" ||
-             v.downcase == "false" ||
-             v.downcase == "f" ||
-             v.downcase == "no" ||
-             v.downcase == "n" )
-        end
-      end
-
-      add_translator( "timestamp" ) { |type, value| Time.at( value.to_i ) }
-      add_translator( "tinyint" ) do |type, value|
-        if type =~ /\(\s*1\s*\)/
-          value.to_i == 1
-        else
-          value.to_i
-        end
-      end
-    end
-    private :register_default_translators
-
-  end
-
-end