spree 0.8.1 → 0.8.2

data/vendor/plugins/rspec/lib/spec/matchers/be.rb

@@ -1,203 +0,0 @@
-module Spec
-  module Matchers
-    
-    class Be #:nodoc:
-      def initialize(*args)
-        @expected = args.empty? ? true : set_expected(args.shift)
-        @args = args
-      end
-      
-      def matches?(actual)
-        @actual = actual
-        handling_predicate? ? run_predicate_on(actual) : match_or_compare(actual)
-      end
-      
-      def run_predicate_on(actual)
-        begin
-          return @result = actual.__send__(predicate, *@args)
-        rescue NameError => predicate_missing_error
-          "this needs to be here or rcov will not count this branch even though it's executed in a code example"
-        end
-
-        begin
-          return @result = actual.__send__(present_tense_predicate, *@args)
-        rescue NameError
-          raise predicate_missing_error
-        end
-      end
-      
-      def failure_message
-        handling_predicate? ?
-          "expected #{predicate}#{args_to_s} to return true, got #{@result.inspect}" :
-          "expected #{@comparison_method} #{expected}, got #{@actual.inspect}".gsub('  ',' ')
-      end
-      
-      def negative_failure_message
-        if handling_predicate?
-          "expected #{predicate}#{args_to_s} to return false, got #{@result.inspect}"
-        else
-          message = <<-MESSAGE
-'should_not be #{@comparison_method} #{expected}' not only FAILED,
-it reads really poorly.
-          MESSAGE
-          
-          raise message << ([:===,:==].include?(@comparison_method) ?
-            "Why don't you try expressing it without the \"be\"?" :
-            "Why don't you try expressing it in the positive?")
-        end
-      end
-      
-      def description
-        "#{prefix_to_sentence}#{comparison} #{expected_to_sentence}#{args_to_sentence}".gsub(/\s+/,' ')
-      end
-
-      [:==, :<, :<=, :>=, :>, :===].each do |method|
-        define_method method do |expected|
-          compare_to(expected, :using => method)
-          self
-        end
-      end
-
-      private
-        def match_or_compare(actual)
-          case @expected
-          when TrueClass
-            @actual
-          else
-            @actual.__send__(comparison_method, @expected)
-          end
-        end
-      
-        def comparison_method
-          @comparison_method || :equal?
-        end
-      
-        def expected
-          @expected
-        end
-
-        def compare_to(expected, opts)
-          @expected, @comparison_method = expected, opts[:using]
-        end
-
-        def set_expected(expected)
-          Symbol === expected ? parse_expected(expected) : expected
-        end
-        
-        def parse_expected(expected)
-          ["be_an_","be_a_","be_"].each do |prefix|
-            handling_predicate!
-            if expected.starts_with?(prefix)
-              set_prefix(prefix)
-              expected = expected.to_s.sub(prefix,"")
-              [true, false, nil].each do |val|
-                return val if val.to_s == expected
-              end
-              return expected.to_sym
-            end
-          end
-        end
-        
-        def set_prefix(prefix)
-          @prefix = prefix
-        end
-        
-        def prefix
-          @prefix
-        end
-
-        def handling_predicate!
-          @handling_predicate = true
-        end
-        
-        def handling_predicate?
-          return false if [true, false, nil].include?(expected)
-          return @handling_predicate
-        end
-
-        def predicate
-          "#{@expected.to_s}?".to_sym
-        end
-        
-        def present_tense_predicate
-          "#{@expected.to_s}s?".to_sym
-        end
-        
-        def args_to_s
-          @args.empty? ? "" : parenthesize(inspected_args.join(', '))
-        end
-        
-        def parenthesize(string)
-          return "(#{string})"
-        end
-        
-        def inspected_args
-          @args.collect{|a| a.inspect}
-        end
-        
-        def comparison
-          @comparison_method.nil? ? " " : "be #{@comparison_method.to_s} "
-        end
-        
-        def expected_to_sentence
-          split_words(expected)
-        end
-        
-        def prefix_to_sentence
-          split_words(prefix)
-        end
-
-        def split_words(sym)
-          sym.to_s.gsub(/_/,' ')
-        end
-
-        def args_to_sentence
-          case @args.length
-            when 0
-              ""
-            when 1
-              " #{@args[0]}"
-            else
-              " #{@args[0...-1].join(', ')} and #{@args[-1]}"
-          end
-        end
-        
-    end
- 
-    # :call-seq:
-    #   should be_true
-    #   should be_false
-    #   should be_nil
-    #   should be_arbitrary_predicate(*args)
-    #   should_not be_nil
-    #   should_not be_arbitrary_predicate(*args)
-    #
-    # Given true, false, or nil, will pass if actual value is
-    # true, false or nil (respectively). Given no args means
-    # the caller should satisfy an if condition (to be or not to be). 
-    #
-    # Predicates are any Ruby method that ends in a "?" and returns true or false.
-    # Given be_ followed by arbitrary_predicate (without the "?"), RSpec will match
-    # convert that into a query against the target object.
-    #
-    # The arbitrary_predicate feature will handle any predicate
-    # prefixed with "be_an_" (e.g. be_an_instance_of), "be_a_" (e.g. be_a_kind_of)
-    # or "be_" (e.g. be_empty), letting you choose the prefix that best suits the predicate.
-    #
-    # == Examples 
-    #
-    #   target.should be_true
-    #   target.should be_false
-    #   target.should be_nil
-    #   target.should_not be_nil
-    #
-    #   collection.should be_empty #passes if target.empty?
-    #   "this string".should be_an_intance_of(String)
-    #
-    #   target.should_not be_empty #passes unless target.empty?
-    #   target.should_not be_old_enough(16) #passes unless target.old_enough?(16)
-    def be(*args)
-      Matchers::Be.new(*args)
-    end
-  end
-end

data/vendor/plugins/rspec/lib/spec/matchers/be_close.rb

@@ -1,21 +0,0 @@
-module Spec
-  module Matchers
-
-    # :call-seq:
-    #   should be_close(expected, delta)
-    #   should_not be_close(expected, delta)
-    #
-    # Passes if actual == expected +/- delta
-    #
-    # == Example
-    #
-    #   result.should be_close(3.0, 0.5)
-    def be_close(expected, delta)
-      simple_matcher do |actual, matcher|
-        matcher.failure_message = "expected #{expected} +/- (< #{delta}), got #{actual}"
-        matcher.description = "be close to #{expected} (within +- #{delta})"
-        (actual - expected).abs < delta
-      end
-    end
-  end
-end

data/vendor/plugins/rspec/lib/spec/matchers/change.rb

@@ -1,148 +0,0 @@
-module Spec
-  module Matchers
-    
-    #Based on patch from Wilson Bilkovich
-    class Change #:nodoc:
-      def initialize(receiver=nil, message=nil, &block)
-        @message = message || "result"
-        @value_proc = block || lambda {
-          receiver.__send__(message)
-        }
-      end
-      
-      def matches?(event_proc)
-        raise_block_syntax_error if block_given?
-        
-        @before = evaluate_value_proc
-        event_proc.call
-        @after = evaluate_value_proc
-        
-        return false if @from unless @from == @before
-        return false if @to unless @to == @after
-        return (@before + @amount == @after) if @amount
-        return ((@after - @before) >= @minimum) if @minimum
-        return ((@after - @before) <= @maximum) if @maximum        
-        return @before != @after
-      end
-      
-      def raise_block_syntax_error
-        raise MatcherError.new(<<-MESSAGE
-block passed to should or should_not change must use {} instead of do/end
-MESSAGE
-        )
-      end
-      
-      def evaluate_value_proc
-        @value_proc.call
-      end
-      
-      def failure_message
-        if @to
-          "#{@message} should have been changed to #{@to.inspect}, but is now #{@after.inspect}"
-        elsif @from
-          "#{@message} should have initially been #{@from.inspect}, but was #{@before.inspect}"
-        elsif @amount
-          "#{@message} should have been changed by #{@amount.inspect}, but was changed by #{actual_delta.inspect}"
-        elsif @minimum
-          "#{@message} should have been changed by at least #{@minimum.inspect}, but was changed by #{actual_delta.inspect}"
-        elsif @maximum
-          "#{@message} should have been changed by at most #{@maximum.inspect}, but was changed by #{actual_delta.inspect}"
-        else
-          "#{@message} should have changed, but is still #{@before.inspect}"
-        end
-      end
-      
-      def actual_delta
-        @after - @before
-      end
-      
-      def negative_failure_message
-        "#{@message} should not have changed, but did change from #{@before.inspect} to #{@after.inspect}"
-      end
-      
-      def by(amount)
-        @amount = amount
-        self
-      end
-      
-      def by_at_least(minimum)
-        @minimum = minimum
-        self
-      end
-      
-      def by_at_most(maximum)
-        @maximum = maximum
-        self
-      end      
-      
-      def to(to)
-        @to = to
-        self
-      end
-      
-      def from (from)
-        @from = from
-        self
-      end
-    end
-    
-    # :call-seq:
-    #   should change(receiver, message, &block)
-    #   should change(receiver, message, &block).by(value)
-    #   should change(receiver, message, &block).from(old).to(new)
-    #   should_not change(receiver, message, &block)
-    #
-    # Allows you to specify that a Proc will cause some value to change.
-    #
-    # == Examples
-    #
-    #   lambda {
-    #     team.add_player(player) 
-    #   }.should change(roster, :count)
-    #
-    #   lambda {
-    #     team.add_player(player) 
-    #   }.should change(roster, :count).by(1)
-    #
-    #   lambda {
-    #     team.add_player(player) 
-    #   }.should change(roster, :count).by_at_least(1)
-    #
-    #   lambda {
-    #     team.add_player(player)
-    #   }.should change(roster, :count).by_at_most(1)    
-    #
-    #   string = "string"
-    #   lambda {
-    #     string.reverse!
-    #   }.should change { string }.from("string").to("gnirts")
-    #
-    #   lambda {
-    #     person.happy_birthday
-    #   }.should change(person, :birthday).from(32).to(33)
-    #       
-    #   lambda {
-    #     employee.develop_great_new_social_networking_app
-    #   }.should change(employee, :title).from("Mail Clerk").to("CEO")
-    #
-    # Evaluates <tt>receiver.message</tt> or <tt>block</tt> before and after
-    # it evaluates the c object (generated by the lambdas in the examples
-    # above).
-    #
-    # Then compares the values before and after the <tt>receiver.message</tt>
-    # and evaluates the difference compared to the expected difference.
-    #
-    # == WARNING
-    # <tt>should_not change</tt> only supports the form with no
-    # subsequent calls to <tt>by</tt>, <tt>by_at_least</tt>,
-    # <tt>by_at_most</tt>, <tt>to</tt> or <tt>from</tt>.
-    #
-    # blocks passed to <tt>should</tt> <tt>change</tt> and <tt>should_not</tt>
-    # <tt>change</tt> must use the <tt>{}</tt> form (<tt>do/end</tt> is not
-    # supported).
-    #
-    def change(receiver=nil, message=nil, &block)
-      Matchers::Change.new(receiver, message, &block)
-    end
-  end
-end

data/vendor/plugins/rspec/lib/spec/matchers/eql.rb

@@ -1,25 +0,0 @@
-module Spec
-  module Matchers
-  
-    # :call-seq:
-    #   should eql(expected)
-    #   should_not eql(expected)
-    #
-    # Passes if actual and expected are of equal value, but not necessarily the same object.
-    #
-    # See http://www.ruby-doc.org/core/classes/Object.html#M001057 for more information about equality in Ruby.
-    #
-    # == Examples
-    #
-    #   5.should eql(5)
-    #   5.should_not eql(3)
-    def eql(expected)
-      simple_matcher do |actual, matcher|
-        matcher.failure_message          = "expected #{expected.inspect}, got #{actual.inspect} (using .eql?)", expected, actual
-        matcher.negative_failure_message = "expected #{actual.inspect} not to equal #{expected.inspect} (using .eql?)", expected, actual
-        matcher.description              = "eql #{expected.inspect}"
-        actual.eql?(expected)
-      end
-    end
-  end
-end

data/vendor/plugins/rspec/lib/spec/matchers/equal.rb

@@ -1,25 +0,0 @@
-module Spec
-  module Matchers
-  
-    # :call-seq:
-    #   should equal(expected)
-    #   should_not equal(expected)
-    #
-    # Passes if actual and expected are the same object (object identity).
-    #
-    # See http://www.ruby-doc.org/core/classes/Object.html#M001057 for more information about equality in Ruby.
-    #
-    # == Examples
-    #
-    #   5.should equal(5) #Fixnums are equal
-    #   "5".should_not equal("5") #Strings that look the same are not the same object
-    def equal(expected)
-      simple_matcher do |actual, matcher|
-        matcher.failure_message          = "expected #{expected.inspect}, got #{actual.inspect} (using .equal?)", expected, actual
-        matcher.negative_failure_message = "expected #{actual.inspect} not to equal #{expected.inspect} (using .equal?)", expected, actual
-        matcher.description              = "equal #{expected.inspect}"
-        actual.equal?(expected)
-      end
-    end
-  end
-end

data/vendor/plugins/rspec/lib/spec/matchers/errors.rb

@@ -1,5 +0,0 @@
-module Spec
-  module Matchers
-    class MatcherError < StandardError; end
-  end
-end

data/vendor/plugins/rspec/lib/spec/matchers/exist.rb

@@ -1,16 +0,0 @@
-module Spec
-  module Matchers
-    # :call-seq:
-    #   should exist
-    #   should_not exist
-    #
-    # Passes if actual.exist?
-    def exist
-      simple_matcher do |actual, matcher|
-        matcher.failure_message = "expected #{actual.inspect} to exist, but it doesn't."
-        matcher.negative_failure_message = "expected #{actual.inspect} to not exist, but it does."
-        actual.exist?
-      end
-    end
-  end
-end