spiral_form 0.1.0

data/vendor/bundle/gems/activerecord-5.2.3/lib/active_record/connection_adapters/abstract/connection_pool.rb

@@ -0,0 +1,1068 @@
+# frozen_string_literal: true
+
+require "thread"
+require "concurrent/map"
+require "monitor"
+
+module ActiveRecord
+  # Raised when a connection could not be obtained within the connection
+  # acquisition timeout period: because max connections in pool
+  # are in use.
+  class ConnectionTimeoutError < ConnectionNotEstablished
+  end
+
+  # Raised when a pool was unable to get ahold of all its connections
+  # to perform a "group" action such as
+  # {ActiveRecord::Base.connection_pool.disconnect!}[rdoc-ref:ConnectionAdapters::ConnectionPool#disconnect!]
+  # or {ActiveRecord::Base.clear_reloadable_connections!}[rdoc-ref:ConnectionAdapters::ConnectionHandler#clear_reloadable_connections!].
+  class ExclusiveConnectionTimeoutError < ConnectionTimeoutError
+  end
+
+  module ConnectionAdapters
+    # Connection pool base class for managing Active Record database
+    # connections.
+    #
+    # == Introduction
+    #
+    # A connection pool synchronizes thread access to a limited number of
+    # database connections. The basic idea is that each thread checks out a
+    # database connection from the pool, uses that connection, and checks the
+    # connection back in. ConnectionPool is completely thread-safe, and will
+    # ensure that a connection cannot be used by two threads at the same time,
+    # as long as ConnectionPool's contract is correctly followed. It will also
+    # handle cases in which there are more threads than connections: if all
+    # connections have been checked out, and a thread tries to checkout a
+    # connection anyway, then ConnectionPool will wait until some other thread
+    # has checked in a connection.
+    #
+    # == Obtaining (checking out) a connection
+    #
+    # Connections can be obtained and used from a connection pool in several
+    # ways:
+    #
+    # 1. Simply use {ActiveRecord::Base.connection}[rdoc-ref:ConnectionHandling.connection]
+    #    as with Active Record 2.1 and
+    #    earlier (pre-connection-pooling). Eventually, when you're done with
+    #    the connection(s) and wish it to be returned to the pool, you call
+    #    {ActiveRecord::Base.clear_active_connections!}[rdoc-ref:ConnectionAdapters::ConnectionHandler#clear_active_connections!].
+    #    This will be the default behavior for Active Record when used in conjunction with
+    #    Action Pack's request handling cycle.
+    # 2. Manually check out a connection from the pool with
+    #    {ActiveRecord::Base.connection_pool.checkout}[rdoc-ref:#checkout]. You are responsible for
+    #    returning this connection to the pool when finished by calling
+    #    {ActiveRecord::Base.connection_pool.checkin(connection)}[rdoc-ref:#checkin].
+    # 3. Use {ActiveRecord::Base.connection_pool.with_connection(&block)}[rdoc-ref:#with_connection], which
+    #    obtains a connection, yields it as the sole argument to the block,
+    #    and returns it to the pool after the block completes.
+    #
+    # Connections in the pool are actually AbstractAdapter objects (or objects
+    # compatible with AbstractAdapter's interface).
+    #
+    # == Options
+    #
+    # There are several connection-pooling-related options that you can add to
+    # your database connection configuration:
+    #
+    # * +pool+: maximum number of connections the pool may manage (default 5).
+    # * +idle_timeout+: number of seconds that a connection will be kept
+    #   unused in the pool before it is automatically disconnected (default
+    #   300 seconds). Set this to zero to keep connections forever.
+    # * +checkout_timeout+: number of seconds to wait for a connection to
+    #   become available before giving up and raising a timeout error (default
+    #   5 seconds).
+    #
+    #--
+    # Synchronization policy:
+    # * all public methods can be called outside +synchronize+
+    # * access to these instance variables needs to be in +synchronize+:
+    #   * @connections
+    #   * @now_connecting
+    # * private methods that require being called in a +synchronize+ blocks
+    #   are now explicitly documented
+    class ConnectionPool
+      # Threadsafe, fair, LIFO queue.  Meant to be used by ConnectionPool
+      # with which it shares a Monitor.
+      class Queue
+        def initialize(lock = Monitor.new)
+          @lock = lock
+          @cond = @lock.new_cond
+          @num_waiting = 0
+          @queue = []
+        end
+
+        # Test if any threads are currently waiting on the queue.
+        def any_waiting?
+          synchronize do
+            @num_waiting > 0
+          end
+        end
+
+        # Returns the number of threads currently waiting on this
+        # queue.
+        def num_waiting
+          synchronize do
+            @num_waiting
+          end
+        end
+
+        # Add +element+ to the queue.  Never blocks.
+        def add(element)
+          synchronize do
+            @queue.push element
+            @cond.signal
+          end
+        end
+
+        # If +element+ is in the queue, remove and return it, or +nil+.
+        def delete(element)
+          synchronize do
+            @queue.delete(element)
+          end
+        end
+
+        # Remove all elements from the queue.
+        def clear
+          synchronize do
+            @queue.clear
+          end
+        end
+
+        # Remove the head of the queue.
+        #
+        # If +timeout+ is not given, remove and return the head the
+        # queue if the number of available elements is strictly
+        # greater than the number of threads currently waiting (that
+        # is, don't jump ahead in line).  Otherwise, return +nil+.
+        #
+        # If +timeout+ is given, block if there is no element
+        # available, waiting up to +timeout+ seconds for an element to
+        # become available.
+        #
+        # Raises:
+        # - ActiveRecord::ConnectionTimeoutError if +timeout+ is given and no element
+        # becomes available within +timeout+ seconds,
+        def poll(timeout = nil)
+          synchronize { internal_poll(timeout) }
+        end
+
+        private
+
+          def internal_poll(timeout)
+            no_wait_poll || (timeout && wait_poll(timeout))
+          end
+
+          def synchronize(&block)
+            @lock.synchronize(&block)
+          end
+
+          # Test if the queue currently contains any elements.
+          def any?
+            !@queue.empty?
+          end
+
+          # A thread can remove an element from the queue without
+          # waiting if and only if the number of currently available
+          # connections is strictly greater than the number of waiting
+          # threads.
+          def can_remove_no_wait?
+            @queue.size > @num_waiting
+          end
+
+          # Removes and returns the head of the queue if possible, or +nil+.
+          def remove
+            @queue.pop
+          end
+
+          # Remove and return the head the queue if the number of
+          # available elements is strictly greater than the number of
+          # threads currently waiting.  Otherwise, return +nil+.
+          def no_wait_poll
+            remove if can_remove_no_wait?
+          end
+
+          # Waits on the queue up to +timeout+ seconds, then removes and
+          # returns the head of the queue.
+          def wait_poll(timeout)
+            @num_waiting += 1
+
+            t0 = Time.now
+            elapsed = 0
+            loop do
+              ActiveSupport::Dependencies.interlock.permit_concurrent_loads do
+                @cond.wait(timeout - elapsed)
+              end
+
+              return remove if any?
+
+              elapsed = Time.now - t0
+              if elapsed >= timeout
+                msg = "could not obtain a connection from the pool within %0.3f seconds (waited %0.3f seconds); all pooled connections were in use" %
+                  [timeout, elapsed]
+                raise ConnectionTimeoutError, msg
+              end
+            end
+          ensure
+            @num_waiting -= 1
+          end
+      end
+
+      # Adds the ability to turn a basic fair FIFO queue into one
+      # biased to some thread.
+      module BiasableQueue # :nodoc:
+        class BiasedConditionVariable # :nodoc:
+          # semantics of condition variables guarantee that +broadcast+, +broadcast_on_biased+,
+          # +signal+ and +wait+ methods are only called while holding a lock
+          def initialize(lock, other_cond, preferred_thread)
+            @real_cond = lock.new_cond
+            @other_cond = other_cond
+            @preferred_thread = preferred_thread
+            @num_waiting_on_real_cond = 0
+          end
+
+          def broadcast
+            broadcast_on_biased
+            @other_cond.broadcast
+          end
+
+          def broadcast_on_biased
+            @num_waiting_on_real_cond = 0
+            @real_cond.broadcast
+          end
+
+          def signal
+            if @num_waiting_on_real_cond > 0
+              @num_waiting_on_real_cond -= 1
+              @real_cond
+            else
+              @other_cond
+            end.signal
+          end
+
+          def wait(timeout)
+            if Thread.current == @preferred_thread
+              @num_waiting_on_real_cond += 1
+              @real_cond
+            else
+              @other_cond
+            end.wait(timeout)
+          end
+        end
+
+        def with_a_bias_for(thread)
+          previous_cond = nil
+          new_cond      = nil
+          synchronize do
+            previous_cond = @cond
+            @cond = new_cond = BiasedConditionVariable.new(@lock, @cond, thread)
+          end
+          yield
+        ensure
+          synchronize do
+            @cond = previous_cond if previous_cond
+            new_cond.broadcast_on_biased if new_cond # wake up any remaining sleepers
+          end
+        end
+      end
+
+      # Connections must be leased while holding the main pool mutex. This is
+      # an internal subclass that also +.leases+ returned connections while
+      # still in queue's critical section (queue synchronizes with the same
+      # <tt>@lock</tt> as the main pool) so that a returned connection is already
+      # leased and there is no need to re-enter synchronized block.
+      class ConnectionLeasingQueue < Queue # :nodoc:
+        include BiasableQueue
+
+        private
+          def internal_poll(timeout)
+            conn = super
+            conn.lease if conn
+            conn
+          end
+      end
+
+      # Every +frequency+ seconds, the reaper will call +reap+ and +flush+ on
+      # +pool+. A reaper instantiated with a zero frequency will never reap
+      # the connection pool.
+      #
+      # Configure the frequency by setting +reaping_frequency+ in your database
+      # yaml file (default 60 seconds).
+      class Reaper
+        attr_reader :pool, :frequency
+
+        def initialize(pool, frequency)
+          @pool      = pool
+          @frequency = frequency
+        end
+
+        def run
+          return unless frequency && frequency > 0
+          Thread.new(frequency, pool) { |t, p|
+            loop do
+              sleep t
+              p.reap
+              p.flush
+            end
+          }
+        end
+      end
+
+      include MonitorMixin
+      include QueryCache::ConnectionPoolConfiguration
+
+      attr_accessor :automatic_reconnect, :checkout_timeout, :schema_cache
+      attr_reader :spec, :connections, :size, :reaper
+
+      # Creates a new ConnectionPool object. +spec+ is a ConnectionSpecification
+      # object which describes database connection information (e.g. adapter,
+      # host name, username, password, etc), as well as the maximum size for
+      # this ConnectionPool.
+      #
+      # The default ConnectionPool maximum size is 5.
+      def initialize(spec)
+        super()
+
+        @spec = spec
+
+        @checkout_timeout = (spec.config[:checkout_timeout] && spec.config[:checkout_timeout].to_f) || 5
+        if @idle_timeout = spec.config.fetch(:idle_timeout, 300)
+          @idle_timeout = @idle_timeout.to_f
+          @idle_timeout = nil if @idle_timeout <= 0
+        end
+
+        # default max pool size to 5
+        @size = (spec.config[:pool] && spec.config[:pool].to_i) || 5
+
+        # This variable tracks the cache of threads mapped to reserved connections, with the
+        # sole purpose of speeding up the +connection+ method. It is not the authoritative
+        # registry of which thread owns which connection. Connection ownership is tracked by
+        # the +connection.owner+ attr on each +connection+ instance.
+        # The invariant works like this: if there is mapping of <tt>thread => conn</tt>,
+        # then that +thread+ does indeed own that +conn+. However, an absence of a such
+        # mapping does not mean that the +thread+ doesn't own the said connection. In
+        # that case +conn.owner+ attr should be consulted.
+        # Access and modification of <tt>@thread_cached_conns</tt> does not require
+        # synchronization.
+        @thread_cached_conns = Concurrent::Map.new(initial_capacity: @size)
+
+        @connections         = []
+        @automatic_reconnect = true
+
+        # Connection pool allows for concurrent (outside the main +synchronize+ section)
+        # establishment of new connections. This variable tracks the number of threads
+        # currently in the process of independently establishing connections to the DB.
+        @now_connecting = 0
+
+        @threads_blocking_new_connections = 0
+
+        @available = ConnectionLeasingQueue.new self
+
+        @lock_thread = false
+
+        # +reaping_frequency+ is configurable mostly for historical reasons, but it could
+        # also be useful if someone wants a very low +idle_timeout+.
+        reaping_frequency = spec.config.fetch(:reaping_frequency, 60)
+        @reaper = Reaper.new(self, reaping_frequency && reaping_frequency.to_f)
+        @reaper.run
+      end
+
+      def lock_thread=(lock_thread)
+        if lock_thread
+          @lock_thread = Thread.current
+        else
+          @lock_thread = nil
+        end
+      end
+
+      # Retrieve the connection associated with the current thread, or call
+      # #checkout to obtain one if necessary.
+      #
+      # #connection can be called any number of times; the connection is
+      # held in a cache keyed by a thread.
+      def connection
+        @thread_cached_conns[connection_cache_key(@lock_thread || Thread.current)] ||= checkout
+      end
+
+      # Returns true if there is an open connection being used for the current thread.
+      #
+      # This method only works for connections that have been obtained through
+      # #connection or #with_connection methods. Connections obtained through
+      # #checkout will not be detected by #active_connection?
+      def active_connection?
+        @thread_cached_conns[connection_cache_key(Thread.current)]
+      end
+
+      # Signal that the thread is finished with the current connection.
+      # #release_connection releases the connection-thread association
+      # and returns the connection to the pool.
+      #
+      # This method only works for connections that have been obtained through
+      # #connection or #with_connection methods, connections obtained through
+      # #checkout will not be automatically released.
+      def release_connection(owner_thread = Thread.current)
+        if conn = @thread_cached_conns.delete(connection_cache_key(owner_thread))
+          checkin conn
+        end
+      end
+
+      # If a connection obtained through #connection or #with_connection methods
+      # already exists yield it to the block. If no such connection
+      # exists checkout a connection, yield it to the block, and checkin the
+      # connection when finished.
+      def with_connection
+        unless conn = @thread_cached_conns[connection_cache_key(Thread.current)]
+          conn = connection
+          fresh_connection = true
+        end
+        yield conn
+      ensure
+        release_connection if fresh_connection
+      end
+
+      # Returns true if a connection has already been opened.
+      def connected?
+        synchronize { @connections.any? }
+      end
+
+      # Disconnects all connections in the pool, and clears the pool.
+      #
+      # Raises:
+      # - ActiveRecord::ExclusiveConnectionTimeoutError if unable to gain ownership of all
+      #   connections in the pool within a timeout interval (default duration is
+      #   <tt>spec.config[:checkout_timeout] * 2</tt> seconds).
+      def disconnect(raise_on_acquisition_timeout = true)
+        with_exclusively_acquired_all_connections(raise_on_acquisition_timeout) do
+          synchronize do
+            @connections.each do |conn|
+              if conn.in_use?
+                conn.steal!
+                checkin conn
+              end
+              conn.disconnect!
+            end
+            @connections = []
+            @available.clear
+          end
+        end
+      end
+
+      # Disconnects all connections in the pool, and clears the pool.
+      #
+      # The pool first tries to gain ownership of all connections. If unable to
+      # do so within a timeout interval (default duration is
+      # <tt>spec.config[:checkout_timeout] * 2</tt> seconds), then the pool is forcefully
+      # disconnected without any regard for other connection owning threads.
+      def disconnect!
+        disconnect(false)
+      end
+
+      # Discards all connections in the pool (even if they're currently
+      # leased!), along with the pool itself. Any further interaction with the
+      # pool (except #spec and #schema_cache) is undefined.
+      #
+      # See AbstractAdapter#discard!
+      def discard! # :nodoc:
+        synchronize do
+          return if @connections.nil? # already discarded
+          @connections.each do |conn|
+            conn.discard!
+          end
+          @connections = @available = @thread_cached_conns = nil
+        end
+      end
+
+      # Clears the cache which maps classes and re-connects connections that
+      # require reloading.
+      #
+      # Raises:
+      # - ActiveRecord::ExclusiveConnectionTimeoutError if unable to gain ownership of all
+      #   connections in the pool within a timeout interval (default duration is
+      #   <tt>spec.config[:checkout_timeout] * 2</tt> seconds).
+      def clear_reloadable_connections(raise_on_acquisition_timeout = true)
+        with_exclusively_acquired_all_connections(raise_on_acquisition_timeout) do
+          synchronize do
+            @connections.each do |conn|
+              if conn.in_use?
+                conn.steal!
+                checkin conn
+              end
+              conn.disconnect! if conn.requires_reloading?
+            end
+            @connections.delete_if(&:requires_reloading?)
+            @available.clear
+          end
+        end
+      end
+
+      # Clears the cache which maps classes and re-connects connections that
+      # require reloading.
+      #
+      # The pool first tries to gain ownership of all connections. If unable to
+      # do so within a timeout interval (default duration is
+      # <tt>spec.config[:checkout_timeout] * 2</tt> seconds), then the pool forcefully
+      # clears the cache and reloads connections without any regard for other
+      # connection owning threads.
+      def clear_reloadable_connections!
+        clear_reloadable_connections(false)
+      end
+
+      # Check-out a database connection from the pool, indicating that you want
+      # to use it. You should call #checkin when you no longer need this.
+      #
+      # This is done by either returning and leasing existing connection, or by
+      # creating a new connection and leasing it.
+      #
+      # If all connections are leased and the pool is at capacity (meaning the
+      # number of currently leased connections is greater than or equal to the
+      # size limit set), an ActiveRecord::ConnectionTimeoutError exception will be raised.
+      #
+      # Returns: an AbstractAdapter object.
+      #
+      # Raises:
+      # - ActiveRecord::ConnectionTimeoutError no connection can be obtained from the pool.
+      def checkout(checkout_timeout = @checkout_timeout)
+        checkout_and_verify(acquire_connection(checkout_timeout))
+      end
+
+      # Check-in a database connection back into the pool, indicating that you
+      # no longer need this connection.
+      #
+      # +conn+: an AbstractAdapter object, which was obtained by earlier by
+      # calling #checkout on this pool.
+      def checkin(conn)
+        conn.lock.synchronize do
+          synchronize do
+            remove_connection_from_thread_cache conn
+
+            conn._run_checkin_callbacks do
+              conn.expire
+            end
+
+            @available.add conn
+          end
+        end
+      end
+
+      # Remove a connection from the connection pool. The connection will
+      # remain open and active but will no longer be managed by this pool.
+      def remove(conn)
+        needs_new_connection = false
+
+        synchronize do
+          remove_connection_from_thread_cache conn
+
+          @connections.delete conn
+          @available.delete conn
+
+          # @available.any_waiting? => true means that prior to removing this
+          # conn, the pool was at its max size (@connections.size == @size).
+          # This would mean that any threads stuck waiting in the queue wouldn't
+          # know they could checkout_new_connection, so let's do it for them.
+          # Because condition-wait loop is encapsulated in the Queue class
+          # (that in turn is oblivious to ConnectionPool implementation), threads
+          # that are "stuck" there are helpless. They have no way of creating
+          # new connections and are completely reliant on us feeding available
+          # connections into the Queue.
+          needs_new_connection = @available.any_waiting?
+        end
+
+        # This is intentionally done outside of the synchronized section as we
+        # would like not to hold the main mutex while checking out new connections.
+        # Thus there is some chance that needs_new_connection information is now
+        # stale, we can live with that (bulk_make_new_connections will make
+        # sure not to exceed the pool's @size limit).
+        bulk_make_new_connections(1) if needs_new_connection
+      end
+
+      # Recover lost connections for the pool. A lost connection can occur if
+      # a programmer forgets to checkin a connection at the end of a thread
+      # or a thread dies unexpectedly.
+      def reap
+        stale_connections = synchronize do
+          @connections.select do |conn|
+            conn.in_use? && !conn.owner.alive?
+          end.each do |conn|
+            conn.steal!
+          end
+        end
+
+        stale_connections.each do |conn|
+          if conn.active?
+            conn.reset!
+            checkin conn
+          else
+            remove conn
+          end
+        end
+      end
+
+      # Disconnect all connections that have been idle for at least
+      # +minimum_idle+ seconds. Connections currently checked out, or that were
+      # checked in less than +minimum_idle+ seconds ago, are unaffected.
+      def flush(minimum_idle = @idle_timeout)
+        return if minimum_idle.nil?
+
+        idle_connections = synchronize do
+          @connections.select do |conn|
+            !conn.in_use? && conn.seconds_idle >= minimum_idle
+          end.each do |conn|
+            conn.lease
+
+            @available.delete conn
+            @connections.delete conn
+          end
+        end
+
+        idle_connections.each do |conn|
+          conn.disconnect!
+        end
+      end
+
+      # Disconnect all currently idle connections. Connections currently checked
+      # out are unaffected.
+      def flush!
+        reap
+        flush(-1)
+      end
+
+      def num_waiting_in_queue # :nodoc:
+        @available.num_waiting
+      end
+
+      # Return connection pool's usage statistic
+      # Example:
+      #
+      #    ActiveRecord::Base.connection_pool.stat # => { size: 15, connections: 1, busy: 1, dead: 0, idle: 0, waiting: 0, checkout_timeout: 5 }
+      def stat
+        synchronize do
+          {
+            size: size,
+            connections: @connections.size,
+            busy: @connections.count { |c| c.in_use? && c.owner.alive? },
+            dead: @connections.count { |c| c.in_use? && !c.owner.alive? },
+            idle: @connections.count { |c| !c.in_use? },
+            waiting: num_waiting_in_queue,
+            checkout_timeout: checkout_timeout
+          }
+        end
+      end
+
+      private
+        #--
+        # this is unfortunately not concurrent
+        def bulk_make_new_connections(num_new_conns_needed)
+          num_new_conns_needed.times do
+            # try_to_checkout_new_connection will not exceed pool's @size limit
+            if new_conn = try_to_checkout_new_connection
+              # make the new_conn available to the starving threads stuck @available Queue
+              checkin(new_conn)
+            end
+          end
+        end
+
+        #--
+        # From the discussion on GitHub:
+        #  https://github.com/rails/rails/pull/14938#commitcomment-6601951
+        # This hook-in method allows for easier monkey-patching fixes needed by
+        # JRuby users that use Fibers.
+        def connection_cache_key(thread)
+          thread
+        end
+
+        # Take control of all existing connections so a "group" action such as
+        # reload/disconnect can be performed safely. It is no longer enough to
+        # wrap it in +synchronize+ because some pool's actions are allowed
+        # to be performed outside of the main +synchronize+ block.
+        def with_exclusively_acquired_all_connections(raise_on_acquisition_timeout = true)
+          with_new_connections_blocked do
+            attempt_to_checkout_all_existing_connections(raise_on_acquisition_timeout)
+            yield
+          end
+        end
+
+        def attempt_to_checkout_all_existing_connections(raise_on_acquisition_timeout = true)
+          collected_conns = synchronize do
+            # account for our own connections
+            @connections.select { |conn| conn.owner == Thread.current }
+          end
+
+          newly_checked_out = []
+          timeout_time      = Time.now + (@checkout_timeout * 2)
+
+          @available.with_a_bias_for(Thread.current) do
+            loop do
+              synchronize do
+                return if collected_conns.size == @connections.size && @now_connecting == 0
+                remaining_timeout = timeout_time - Time.now
+                remaining_timeout = 0 if remaining_timeout < 0
+                conn = checkout_for_exclusive_access(remaining_timeout)
+                collected_conns   << conn
+                newly_checked_out << conn
+              end
+            end
+          end
+        rescue ExclusiveConnectionTimeoutError
+          # <tt>raise_on_acquisition_timeout == false</tt> means we are directed to ignore any
+          # timeouts and are expected to just give up: we've obtained as many connections
+          # as possible, note that in a case like that we don't return any of the
+          # +newly_checked_out+ connections.
+
+          if raise_on_acquisition_timeout
+            release_newly_checked_out = true
+            raise
+          end
+        rescue Exception # if something else went wrong
+          # this can't be a "naked" rescue, because we have should return conns
+          # even for non-StandardErrors
+          release_newly_checked_out = true
+          raise
+        ensure
+          if release_newly_checked_out && newly_checked_out
+            # releasing only those conns that were checked out in this method, conns
+            # checked outside this method (before it was called) are not for us to release
+            newly_checked_out.each { |conn| checkin(conn) }
+          end
+        end
+
+        #--
+        # Must be called in a synchronize block.
+        def checkout_for_exclusive_access(checkout_timeout)
+          checkout(checkout_timeout)
+        rescue ConnectionTimeoutError
+          # this block can't be easily moved into attempt_to_checkout_all_existing_connections's
+          # rescue block, because doing so would put it outside of synchronize section, without
+          # being in a critical section thread_report might become inaccurate
+          msg = "could not obtain ownership of all database connections in #{checkout_timeout} seconds".dup
+
+          thread_report = []
+          @connections.each do |conn|
+            unless conn.owner == Thread.current
+              thread_report << "#{conn} is owned by #{conn.owner}"
+            end
+          end
+
+          msg << " (#{thread_report.join(', ')})" if thread_report.any?
+
+          raise ExclusiveConnectionTimeoutError, msg
+        end
+
+        def with_new_connections_blocked
+          synchronize do
+            @threads_blocking_new_connections += 1
+          end
+
+          yield
+        ensure
+          num_new_conns_required = 0
+
+          synchronize do
+            @threads_blocking_new_connections -= 1
+
+            if @threads_blocking_new_connections.zero?
+              @available.clear
+
+              num_new_conns_required = num_waiting_in_queue
+
+              @connections.each do |conn|
+                next if conn.in_use?
+
+                @available.add conn
+                num_new_conns_required -= 1
+              end
+            end
+          end
+
+          bulk_make_new_connections(num_new_conns_required) if num_new_conns_required > 0
+        end
+
+        # Acquire a connection by one of 1) immediately removing one
+        # from the queue of available connections, 2) creating a new
+        # connection if the pool is not at capacity, 3) waiting on the
+        # queue for a connection to become available.
+        #
+        # Raises:
+        # - ActiveRecord::ConnectionTimeoutError if a connection could not be acquired
+        #
+        #--
+        # Implementation detail: the connection returned by +acquire_connection+
+        # will already be "+connection.lease+ -ed" to the current thread.
+        def acquire_connection(checkout_timeout)
+          # NOTE: we rely on <tt>@available.poll</tt> and +try_to_checkout_new_connection+ to
+          # +conn.lease+ the returned connection (and to do this in a +synchronized+
+          # section). This is not the cleanest implementation, as ideally we would
+          # <tt>synchronize { conn.lease }</tt> in this method, but by leaving it to <tt>@available.poll</tt>
+          # and +try_to_checkout_new_connection+ we can piggyback on +synchronize+ sections
+          # of the said methods and avoid an additional +synchronize+ overhead.
+          if conn = @available.poll || try_to_checkout_new_connection
+            conn
+          else
+            reap
+            @available.poll(checkout_timeout)
+          end
+        end
+
+        #--
+        # if owner_thread param is omitted, this must be called in synchronize block
+        def remove_connection_from_thread_cache(conn, owner_thread = conn.owner)
+          @thread_cached_conns.delete_pair(connection_cache_key(owner_thread), conn)
+        end
+        alias_method :release, :remove_connection_from_thread_cache
+
+        def new_connection
+          Base.send(spec.adapter_method, spec.config).tap do |conn|
+            conn.schema_cache = schema_cache.dup if schema_cache
+          end
+        end
+
+        # If the pool is not at a <tt>@size</tt> limit, establish new connection. Connecting
+        # to the DB is done outside main synchronized section.
+        #--
+        # Implementation constraint: a newly established connection returned by this
+        # method must be in the +.leased+ state.
+        def try_to_checkout_new_connection
+          # first in synchronized section check if establishing new conns is allowed
+          # and increment @now_connecting, to prevent overstepping this pool's @size
+          # constraint
+          do_checkout = synchronize do
+            if @threads_blocking_new_connections.zero? && (@connections.size + @now_connecting) < @size
+              @now_connecting += 1
+            end
+          end
+          if do_checkout
+            begin
+              # if successfully incremented @now_connecting establish new connection
+              # outside of synchronized section
+              conn = checkout_new_connection
+            ensure
+              synchronize do
+                if conn
+                  adopt_connection(conn)
+                  # returned conn needs to be already leased
+                  conn.lease
+                end
+                @now_connecting -= 1
+              end
+            end
+          end
+        end
+
+        def adopt_connection(conn)
+          conn.pool = self
+          @connections << conn
+        end
+
+        def checkout_new_connection
+          raise ConnectionNotEstablished unless @automatic_reconnect
+          new_connection
+        end
+
+        def checkout_and_verify(c)
+          c._run_checkout_callbacks do
+            c.verify!
+          end
+          c
+        rescue
+          remove c
+          c.disconnect!
+          raise
+        end
+    end
+
+    # ConnectionHandler is a collection of ConnectionPool objects. It is used
+    # for keeping separate connection pools that connect to different databases.
+    #
+    # For example, suppose that you have 5 models, with the following hierarchy:
+    #
+    #   class Author < ActiveRecord::Base
+    #   end
+    #
+    #   class BankAccount < ActiveRecord::Base
+    #   end
+    #
+    #   class Book < ActiveRecord::Base
+    #     establish_connection :library_db
+    #   end
+    #
+    #   class ScaryBook < Book
+    #   end
+    #
+    #   class GoodBook < Book
+    #   end
+    #
+    # And a database.yml that looked like this:
+    #
+    #   development:
+    #     database: my_application
+    #     host: localhost
+    #
+    #   library_db:
+    #     database: library
+    #     host: some.library.org
+    #
+    # Your primary database in the development environment is "my_application"
+    # but the Book model connects to a separate database called "library_db"
+    # (this can even be a database on a different machine).
+    #
+    # Book, ScaryBook and GoodBook will all use the same connection pool to
+    # "library_db" while Author, BankAccount, and any other models you create
+    # will use the default connection pool to "my_application".
+    #
+    # The various connection pools are managed by a single instance of
+    # ConnectionHandler accessible via ActiveRecord::Base.connection_handler.
+    # All Active Record models use this handler to determine the connection pool that they
+    # should use.
+    #
+    # The ConnectionHandler class is not coupled with the Active models, as it has no knowledge
+    # about the model. The model needs to pass a specification name to the handler,
+    # in order to look up the correct connection pool.
+    class ConnectionHandler
+      def self.create_owner_to_pool # :nodoc:
+        Concurrent::Map.new(initial_capacity: 2) do |h, k|
+          # Discard the parent's connection pools immediately; we have no need
+          # of them
+          discard_unowned_pools(h)
+
+          h[k] = Concurrent::Map.new(initial_capacity: 2)
+        end
+      end
+
+      def self.unowned_pool_finalizer(pid_map) # :nodoc:
+        lambda do |_|
+          discard_unowned_pools(pid_map)
+        end
+      end
+
+      def self.discard_unowned_pools(pid_map) # :nodoc:
+        pid_map.each do |pid, pools|
+          pools.values.compact.each(&:discard!) unless pid == Process.pid
+        end
+      end
+
+      def initialize
+        # These caches are keyed by spec.name (ConnectionSpecification#name).
+        @owner_to_pool = ConnectionHandler.create_owner_to_pool
+
+        # Backup finalizer: if the forked child never needed a pool, the above
+        # early discard has not occurred
+        ObjectSpace.define_finalizer self, ConnectionHandler.unowned_pool_finalizer(@owner_to_pool)
+      end
+
+      def connection_pool_list
+        owner_to_pool.values.compact
+      end
+      alias :connection_pools :connection_pool_list
+
+      def establish_connection(config)
+        resolver = ConnectionSpecification::Resolver.new(Base.configurations)
+        spec = resolver.spec(config)
+
+        remove_connection(spec.name)
+
+        message_bus = ActiveSupport::Notifications.instrumenter
+        payload = {
+          connection_id: object_id
+        }
+        if spec
+          payload[:spec_name] = spec.name
+          payload[:config] = spec.config
+        end
+
+        message_bus.instrument("!connection.active_record", payload) do
+          owner_to_pool[spec.name] = ConnectionAdapters::ConnectionPool.new(spec)
+        end
+
+        owner_to_pool[spec.name]
+      end
+
+      # Returns true if there are any active connections among the connection
+      # pools that the ConnectionHandler is managing.
+      def active_connections?
+        connection_pool_list.any?(&:active_connection?)
+      end
+
+      # Returns any connections in use by the current thread back to the pool,
+      # and also returns connections to the pool cached by threads that are no
+      # longer alive.
+      def clear_active_connections!
+        connection_pool_list.each(&:release_connection)
+      end
+
+      # Clears the cache which maps classes.
+      #
+      # See ConnectionPool#clear_reloadable_connections! for details.
+      def clear_reloadable_connections!
+        connection_pool_list.each(&:clear_reloadable_connections!)
+      end
+
+      def clear_all_connections!
+        connection_pool_list.each(&:disconnect!)
+      end
+
+      # Disconnects all currently idle connections.
+      #
+      # See ConnectionPool#flush! for details.
+      def flush_idle_connections!
+        connection_pool_list.each(&:flush!)
+      end
+
+      # Locate the connection of the nearest super class. This can be an
+      # active or defined connection: if it is the latter, it will be
+      # opened and set as the active connection for the class it was defined
+      # for (not necessarily the current class).
+      def retrieve_connection(spec_name) #:nodoc:
+        pool = retrieve_connection_pool(spec_name)
+        raise ConnectionNotEstablished, "No connection pool with '#{spec_name}' found." unless pool
+        pool.connection
+      end
+
+      # Returns true if a connection that's accessible to this class has
+      # already been opened.
+      def connected?(spec_name)
+        conn = retrieve_connection_pool(spec_name)
+        conn && conn.connected?
+      end
+
+      # Remove the connection for this class. This will close the active
+      # connection and the defined connection (if they exist). The result
+      # can be used as an argument for #establish_connection, for easily
+      # re-establishing the connection.
+      def remove_connection(spec_name)
+        if pool = owner_to_pool.delete(spec_name)
+          pool.automatic_reconnect = false
+          pool.disconnect!
+          pool.spec.config
+        end
+      end
+
+      # Retrieving the connection pool happens a lot, so we cache it in @owner_to_pool.
+      # This makes retrieving the connection pool O(1) once the process is warm.
+      # When a connection is established or removed, we invalidate the cache.
+      def retrieve_connection_pool(spec_name)
+        owner_to_pool.fetch(spec_name) do
+          # Check if a connection was previously established in an ancestor process,
+          # which may have been forked.
+          if ancestor_pool = pool_from_any_process_for(spec_name)
+            # A connection was established in an ancestor process that must have
+            # subsequently forked. We can't reuse the connection, but we can copy
+            # the specification and establish a new connection with it.
+            establish_connection(ancestor_pool.spec.to_hash).tap do |pool|
+              pool.schema_cache = ancestor_pool.schema_cache if ancestor_pool.schema_cache
+            end
+          else
+            owner_to_pool[spec_name] = nil
+          end
+        end
+      end
+
+      private
+
+        def owner_to_pool
+          @owner_to_pool[Process.pid]
+        end
+
+        def pool_from_any_process_for(spec_name)
+          owner_to_pool = @owner_to_pool.values.reverse.find { |v| v[spec_name] }
+          owner_to_pool && owner_to_pool[spec_name]
+        end
+    end
+  end
+end