snaptrade 3.0.44 → 3.0.46

data/lib/snaptrade/models/account_order.rb

@@ -0,0 +1,438 @@
+=begin
+#SnapTrade
+
+#Connect brokerage accounts to your app for live positions and trading.  ## Rate limiting  Two limits apply to requests signed with your `clientId`. The stricter one wins, and exceeding either returns `429 Too Many Requests`.  - **Customer-level** — 250 requests/minute by default, scoped to your   `clientId` and applied across all endpoints. Reported in   `X-RateLimit-Limit`, `X-RateLimit-Remaining` and `X-RateLimit-Reset`. - **Account-level** — 10 requests/minute per account, scoped to   (`clientId`, `accountId`). All covered operations for one account draw on   the same bucket — reading balances and reading positions share it — and   enforcement does not depend on the HTTP method, so updating an account   consumes the same bucket as reading it. Only enforced for Personal users,   and only for integrations it has been rolled out to — it is not yet in   force for every Personal integration. It also does not apply on every   operation that documents a 429 below. Where it applies it is reported in   `X-RateLimit-Account-Limit`, `X-RateLimit-Account-Remaining` and   `X-RateLimit-Account-Reset`. Do not read the absence of those headers as   proof the limit is off — some configurations omit the rate limit headers   while still enforcing the limit, so header absence tells you nothing   about your allowance.  On a 429, `X-RateLimit-Remaining: 0` means you hit the customer-level limit and `X-RateLimit-Account-Remaining: 0` means the account-level one. Wait for the corresponding `*-Reset` value (seconds) before retrying, or fall back to exponential backoff with jitter.  Not every 429 is explained by those headers. A separate per-authenticated-user limit, reported in no `X-RateLimit-*` header, covers OAuth-authenticated requests and signed requests in configurations where the customer-level limit is not in effect — on the operations that use the default throttles. A few operations override those and are governed by the customer-level limit alone. The two do not stack: a signed request governed by the customer-level limit above is not additionally subject to the per-user one. If a 429 arrives with no header at zero — or with no `X-RateLimit-*` headers at all — honour `Retry-After` and back off. Treat the remaining counts as a hint, not a guarantee that the next request will succeed.  Because the customer-level limit applies everywhere, any signed request can return 429.  **OAuth-authenticated requests are an exception.** They are not subject to the customer-level limit and do not receive `X-RateLimit-Limit`, `X-RateLimit-Remaining` or `X-RateLimit-Reset` — do not wait on those headers or design around a customer-level allowance on this path. The account-level limit still applies to them on the account-data endpoints above, reported in the `X-RateLimit-Account-*` headers. On operations using the default throttles the per-user limit above applies to them as well, so an OAuth request can be rejected while the account headers still show capacity; on the few operations that override those throttles, OAuth callers have no per-user ceiling at all. Drive retries from `Retry-After` and exponential backoff with jitter rather than from the headers.  See https://docs.snaptrade.com/docs/ratelimiting. 
+
+The version of the OpenAPI document: 1.0.0
+Contact: api@snaptrade.com
+=end
+
+require 'date'
+require 'time'
+
+module SnapTrade
+  # A single order. Single-leg orders have exactly one entry in `legs`; multi-leg orders (spreads, strangles, covered calls) have one entry per leg.
+  class AccountOrder
+    # Order ID returned by brokerage. This is the unique identifier for the order in the brokerage system.
+    attr_accessor :brokerage_order_id
+
+    # Indicates the status of an order. SnapTrade does a best effort to map brokerage statuses to statuses in this enum.
+    attr_accessor :status
+
+    attr_accessor :order_type
+
+    # How long the order remains active. Brokerage values that cannot be mapped to this list are returned as `OTHER`.   - `DAY` - valid only for the trading day on which it is placed.   - `GTC` - Good Til Canceled.   - `FOK` - Fill Or Kill.   - `IOC` - Immediate Or Cancel.   - `GTD` - Good Til Date; see `expiry_date`.   - `MOO` - Market On Open.   - `EHP` - Extended Hours P.M.   - `EHA` - Extended Hours A.M.   - `OTHER` - the brokerage reported a value outside this list. 
+    attr_accessor :time_in_force
+
+    # When the order expires, for orders with a `time_in_force` of `GTD`.
+    attr_accessor :expiry_date
+
+    # ISO-4217 currency code the order prices are denominated in. For crypto pairs this is the quote asset (for example `USDC` for `ETH-USDC`).
+    attr_accessor :price_currency
+
+    # Direction of the net order price. CREDIT means cash is received, DEBIT means cash is paid, EVEN means the net price is zero, and UNKNOWN means the direction could not be determined.
+    attr_accessor :price_effect
+
+    # Total quantity requested. For multi-leg orders this is the number of spreads, not the sum of leg quantities.
+    attr_accessor :total_quantity
+
+    # Quantity filled so far.
+    attr_accessor :filled_quantity
+
+    # Quantity canceled.
+    attr_accessor :canceled_quantity
+
+    # Quantity still open (not yet filled or canceled).
+    attr_accessor :open_quantity
+
+    # Average execution price. Per unit for single-leg orders; net price per spread for multi-leg orders.
+    attr_accessor :execution_price
+
+    # The time the order was submitted to the brokerage, when the brokerage reports it.
+    attr_accessor :time_placed
+
+    # The time the order was last updated at the brokerage, when available.
+    attr_accessor :time_updated
+
+    # The time the order was executed, when available.
+    attr_accessor :time_executed
+
+    attr_accessor :group
+
+    # The legs that make up the order. Always has at least one entry.
+    attr_accessor :legs
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'brokerage_order_id' => :'brokerage_order_id',
+        :'status' => :'status',
+        :'order_type' => :'order_type',
+        :'time_in_force' => :'time_in_force',
+        :'expiry_date' => :'expiry_date',
+        :'price_currency' => :'price_currency',
+        :'price_effect' => :'price_effect',
+        :'total_quantity' => :'total_quantity',
+        :'filled_quantity' => :'filled_quantity',
+        :'canceled_quantity' => :'canceled_quantity',
+        :'open_quantity' => :'open_quantity',
+        :'execution_price' => :'execution_price',
+        :'time_placed' => :'time_placed',
+        :'time_updated' => :'time_updated',
+        :'time_executed' => :'time_executed',
+        :'group' => :'group',
+        :'legs' => :'legs'
+      }
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'brokerage_order_id' => :'String',
+        :'status' => :'AccountOrderRecordStatusV2',
+        :'order_type' => :'OrderTypeConfiguration',
+        :'time_in_force' => :'AccountOrderTimeInForce',
+        :'expiry_date' => :'Time',
+        :'price_currency' => :'String',
+        :'price_effect' => :'PriceEffect',
+        :'total_quantity' => :'Float',
+        :'filled_quantity' => :'Float',
+        :'canceled_quantity' => :'Float',
+        :'open_quantity' => :'Float',
+        :'execution_price' => :'Float',
+        :'time_placed' => :'Time',
+        :'time_updated' => :'Time',
+        :'time_executed' => :'Time',
+        :'group' => :'AccountOrderGroup',
+        :'legs' => :'Array<AccountOrderLeg>'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+        :'expiry_date',
+        :'price_currency',
+        :'total_quantity',
+        :'filled_quantity',
+        :'canceled_quantity',
+        :'open_quantity',
+        :'execution_price',
+        :'time_placed',
+        :'time_updated',
+        :'time_executed',
+        :'group',
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `SnapTrade::AccountOrder` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!self.class.attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `SnapTrade::AccountOrder`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'brokerage_order_id')
+        self.brokerage_order_id = attributes[:'brokerage_order_id']
+      end
+
+      if attributes.key?(:'status')
+        self.status = attributes[:'status']
+      end
+
+      if attributes.key?(:'order_type')
+        self.order_type = attributes[:'order_type']
+      end
+
+      if attributes.key?(:'time_in_force')
+        self.time_in_force = attributes[:'time_in_force']
+      end
+
+      if attributes.key?(:'expiry_date')
+        self.expiry_date = attributes[:'expiry_date']
+      end
+
+      if attributes.key?(:'price_currency')
+        self.price_currency = attributes[:'price_currency']
+      end
+
+      if attributes.key?(:'price_effect')
+        self.price_effect = attributes[:'price_effect']
+      end
+
+      if attributes.key?(:'total_quantity')
+        self.total_quantity = attributes[:'total_quantity']
+      end
+
+      if attributes.key?(:'filled_quantity')
+        self.filled_quantity = attributes[:'filled_quantity']
+      end
+
+      if attributes.key?(:'canceled_quantity')
+        self.canceled_quantity = attributes[:'canceled_quantity']
+      end
+
+      if attributes.key?(:'open_quantity')
+        self.open_quantity = attributes[:'open_quantity']
+      end
+
+      if attributes.key?(:'execution_price')
+        self.execution_price = attributes[:'execution_price']
+      end
+
+      if attributes.key?(:'time_placed')
+        self.time_placed = attributes[:'time_placed']
+      end
+
+      if attributes.key?(:'time_updated')
+        self.time_updated = attributes[:'time_updated']
+      end
+
+      if attributes.key?(:'time_executed')
+        self.time_executed = attributes[:'time_executed']
+      end
+
+      if attributes.key?(:'group')
+        self.group = attributes[:'group']
+      end
+
+      if attributes.key?(:'legs')
+        if (value = attributes[:'legs']).is_a?(Array)
+          self.legs = value
+        end
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      if @brokerage_order_id.nil?
+        invalid_properties.push('invalid value for "brokerage_order_id", brokerage_order_id cannot be nil.')
+      end
+
+      if @status.nil?
+        invalid_properties.push('invalid value for "status", status cannot be nil.')
+      end
+
+      if @order_type.nil?
+        invalid_properties.push('invalid value for "order_type", order_type cannot be nil.')
+      end
+
+      if @time_in_force.nil?
+        invalid_properties.push('invalid value for "time_in_force", time_in_force cannot be nil.')
+      end
+
+      if @price_effect.nil?
+        invalid_properties.push('invalid value for "price_effect", price_effect cannot be nil.')
+      end
+
+      if @legs.nil?
+        invalid_properties.push('invalid value for "legs", legs cannot be nil.')
+      end
+
+      if @legs.length < 1
+        invalid_properties.push('invalid value for "legs", number of items must be greater than or equal to 1.')
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      return false if @brokerage_order_id.nil?
+      return false if @status.nil?
+      return false if @order_type.nil?
+      return false if @time_in_force.nil?
+      return false if @price_effect.nil?
+      return false if @legs.nil?
+      return false if @legs.length < 1
+      true
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] legs Value to be assigned
+    def legs=(legs)
+      if legs.nil?
+        fail ArgumentError, 'legs cannot be nil'
+      end
+
+      if legs.length < 1
+        fail ArgumentError, 'invalid value for "legs", number of items must be greater than or equal to 1.'
+      end
+
+      @legs = legs
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          brokerage_order_id == o.brokerage_order_id &&
+          status == o.status &&
+          order_type == o.order_type &&
+          time_in_force == o.time_in_force &&
+          expiry_date == o.expiry_date &&
+          price_currency == o.price_currency &&
+          price_effect == o.price_effect &&
+          total_quantity == o.total_quantity &&
+          filled_quantity == o.filled_quantity &&
+          canceled_quantity == o.canceled_quantity &&
+          open_quantity == o.open_quantity &&
+          execution_price == o.execution_price &&
+          time_placed == o.time_placed &&
+          time_updated == o.time_updated &&
+          time_executed == o.time_executed &&
+          group == o.group &&
+          legs == o.legs
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [brokerage_order_id, status, order_type, time_in_force, expiry_date, price_currency, price_effect, total_quantity, filled_quantity, canceled_quantity, open_quantity, execution_price, time_placed, time_updated, time_executed, group, legs].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      new.build_from_hash(attributes)
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
+      self.class.openapi_types.each_pair do |key, type|
+        if attributes[self.class.attribute_map[key]].nil? && self.class.openapi_nullable.include?(key)
+          self.send("#{key}=", nil)
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :Time
+        Time.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :Boolean
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        # models (e.g. Pet) or oneOf
+        klass = SnapTrade.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end

data/lib/snaptrade/models/account_order_group.rb

@@ -0,0 +1,241 @@
+=begin
+#SnapTrade
+
+#Connect brokerage accounts to your app for live positions and trading.  ## Rate limiting  Two limits apply to requests signed with your `clientId`. The stricter one wins, and exceeding either returns `429 Too Many Requests`.  - **Customer-level** — 250 requests/minute by default, scoped to your   `clientId` and applied across all endpoints. Reported in   `X-RateLimit-Limit`, `X-RateLimit-Remaining` and `X-RateLimit-Reset`. - **Account-level** — 10 requests/minute per account, scoped to   (`clientId`, `accountId`). All covered operations for one account draw on   the same bucket — reading balances and reading positions share it — and   enforcement does not depend on the HTTP method, so updating an account   consumes the same bucket as reading it. Only enforced for Personal users,   and only for integrations it has been rolled out to — it is not yet in   force for every Personal integration. It also does not apply on every   operation that documents a 429 below. Where it applies it is reported in   `X-RateLimit-Account-Limit`, `X-RateLimit-Account-Remaining` and   `X-RateLimit-Account-Reset`. Do not read the absence of those headers as   proof the limit is off — some configurations omit the rate limit headers   while still enforcing the limit, so header absence tells you nothing   about your allowance.  On a 429, `X-RateLimit-Remaining: 0` means you hit the customer-level limit and `X-RateLimit-Account-Remaining: 0` means the account-level one. Wait for the corresponding `*-Reset` value (seconds) before retrying, or fall back to exponential backoff with jitter.  Not every 429 is explained by those headers. A separate per-authenticated-user limit, reported in no `X-RateLimit-*` header, covers OAuth-authenticated requests and signed requests in configurations where the customer-level limit is not in effect — on the operations that use the default throttles. A few operations override those and are governed by the customer-level limit alone. The two do not stack: a signed request governed by the customer-level limit above is not additionally subject to the per-user one. If a 429 arrives with no header at zero — or with no `X-RateLimit-*` headers at all — honour `Retry-After` and back off. Treat the remaining counts as a hint, not a guarantee that the next request will succeed.  Because the customer-level limit applies everywhere, any signed request can return 429.  **OAuth-authenticated requests are an exception.** They are not subject to the customer-level limit and do not receive `X-RateLimit-Limit`, `X-RateLimit-Remaining` or `X-RateLimit-Reset` — do not wait on those headers or design around a customer-level allowance on this path. The account-level limit still applies to them on the account-data endpoints above, reported in the `X-RateLimit-Account-*` headers. On operations using the default throttles the per-user limit above applies to them as well, so an OAuth request can be rejected while the account headers still show capacity; on the few operations that override those throttles, OAuth callers have no per-user ceiling at all. Drive retries from `Retry-After` and exponential backoff with jitter rather than from the headers.  See https://docs.snaptrade.com/docs/ratelimiting. 
+
+The version of the OpenAPI document: 1.0.0
+Contact: api@snaptrade.com
+=end
+
+require 'date'
+require 'time'
+
+module SnapTrade
+  # Set when this order belongs to a complex order group (OCO, OTO, OTOCO). Null otherwise.
+  class AccountOrderGroup
+    # Brokerage-assigned identifier shared by every order in the group.
+    attr_accessor :id
+
+    # This order's role within the group, when the brokerage reports it.
+    attr_accessor :role
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'id' => :'id',
+        :'role' => :'role'
+      }
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'id' => :'String',
+        :'role' => :'AccountOrderRecordV2OrderRole'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+        :'role'
+      ])
+    end
+
+    # List of class defined in allOf (OpenAPI v3)
+    def self.openapi_all_of
+      [
+      :'AccountOrderGroup'
+      ]
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `SnapTrade::AccountOrderGroup` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!self.class.attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `SnapTrade::AccountOrderGroup`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'id')
+        self.id = attributes[:'id']
+      end
+
+      if attributes.key?(:'role')
+        self.role = attributes[:'role']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      if @id.nil?
+        invalid_properties.push('invalid value for "id", id cannot be nil.')
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      return false if @id.nil?
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          id == o.id &&
+          role == o.role
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [id, role].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      new.build_from_hash(attributes)
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
+      self.class.openapi_types.each_pair do |key, type|
+        if attributes[self.class.attribute_map[key]].nil? && self.class.openapi_nullable.include?(key)
+          self.send("#{key}=", nil)
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :Time
+        Time.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :Boolean
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        # models (e.g. Pet) or oneOf
+        klass = SnapTrade.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end