snaptrade 3.0.30 → 3.0.32

data/lib/snaptrade/models/account_information_get_user_holdings409_response.rb

@@ -0,0 +1,234 @@
+=begin
+#SnapTrade
+
+#Connect brokerage accounts to your app for live positions and trading.  ## Rate limiting  Two limits apply to requests signed with your `clientId`. The stricter one wins, and exceeding either returns `429 Too Many Requests`.  - **Customer-level** — 250 requests/minute by default, scoped to your   `clientId` and applied across all endpoints. Reported in   `X-RateLimit-Limit`, `X-RateLimit-Remaining` and `X-RateLimit-Reset`. - **Account-level** — 10 requests/minute per account, scoped to   (`clientId`, `accountId`). All covered operations for one account draw on   the same bucket — reading balances and reading positions share it — and   enforcement does not depend on the HTTP method, so updating an account   consumes the same bucket as reading it. Only enforced for Personal users,   and only for integrations it has been rolled out to — it is not yet in   force for every Personal integration. It also does not apply on every   operation that documents a 429 below. Where it applies it is reported in   `X-RateLimit-Account-Limit`, `X-RateLimit-Account-Remaining` and   `X-RateLimit-Account-Reset`. Do not read the absence of those headers as   proof the limit is off — some configurations omit the rate limit headers   while still enforcing the limit, so header absence tells you nothing   about your allowance.  On a 429, `X-RateLimit-Remaining: 0` means you hit the customer-level limit and `X-RateLimit-Account-Remaining: 0` means the account-level one. Wait for the corresponding `*-Reset` value (seconds) before retrying, or fall back to exponential backoff with jitter.  Not every 429 is explained by those headers. A separate per-authenticated-user limit, reported in no `X-RateLimit-*` header, covers OAuth-authenticated requests and signed requests in configurations where the customer-level limit is not in effect — on the operations that use the default throttles. A few operations override those and are governed by the customer-level limit alone. The two do not stack: a signed request governed by the customer-level limit above is not additionally subject to the per-user one. If a 429 arrives with no header at zero — or with no `X-RateLimit-*` headers at all — honour `Retry-After` and back off. Treat the remaining counts as a hint, not a guarantee that the next request will succeed.  Because the customer-level limit applies everywhere, any signed request can return 429.  **OAuth-authenticated requests are an exception.** They are not subject to the customer-level limit and do not receive `X-RateLimit-Limit`, `X-RateLimit-Remaining` or `X-RateLimit-Reset` — do not wait on those headers or design around a customer-level allowance on this path. The account-level limit still applies to them on the account-data endpoints above, reported in the `X-RateLimit-Account-*` headers. On operations using the default throttles the per-user limit above applies to them as well, so an OAuth request can be rejected while the account headers still show capacity; on the few operations that override those throttles, OAuth callers have no per-user ceiling at all. Drive retries from `Retry-After` and exponential backoff with jitter rather than from the headers.  See https://docs.snaptrade.com/docs/ratelimiting. 
+
+The version of the OpenAPI document: 1.0.0
+Contact: api@snaptrade.com
+=end
+
+require 'date'
+require 'time'
+
+module SnapTrade
+  class AccountInformationGetUserHoldings409Response
+    attr_accessor :detail
+
+    attr_accessor :status_code
+
+    attr_accessor :code
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'detail' => :'detail',
+        :'status_code' => :'status_code',
+        :'code' => :'code'
+      }
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'detail' => :'String',
+        :'status_code' => :'Integer',
+        :'code' => :'String'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `SnapTrade::AccountInformationGetUserHoldings409Response` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!self.class.attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `SnapTrade::AccountInformationGetUserHoldings409Response`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'detail')
+        self.detail = attributes[:'detail']
+      end
+
+      if attributes.key?(:'status_code')
+        self.status_code = attributes[:'status_code']
+      end
+
+      if attributes.key?(:'code')
+        self.code = attributes[:'code']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          detail == o.detail &&
+          status_code == o.status_code &&
+          code == o.code
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [detail, status_code, code].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      new.build_from_hash(attributes)
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
+      self.class.openapi_types.each_pair do |key, type|
+        if attributes[self.class.attribute_map[key]].nil? && self.class.openapi_nullable.include?(key)
+          self.send("#{key}=", nil)
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :Time
+        Time.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :Boolean
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        # models (e.g. Pet) or oneOf
+        klass = SnapTrade.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end

data/lib/snaptrade/models/account_position.rb

@@ -30,7 +30,7 @@ module SnapTrade
     # Present for mutual fund positions and for other instrument kinds when true. A true value means the position is also counted in cash balance or buying power.
     attr_accessor :cash_equivalent
 
-    # List of tax lots for the given position (disabled by default, only available on paid plans, contact support if needed)
+    # List of tax lots for the given position. Disabled by default; enable via the Customer Dashboard Add-ons page. When enabled, this field is included only for stocks, ADRs, ETFs, mutual funds, and crypto positions. For these positions, an empty list means no tax lot data is available. Availability varies by brokerage and position. This field is omitted for all other instrument kinds or when the feature is disabled.
     attr_accessor :tax_lots
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/snaptrade/models/account_value_history_response.rb

@@ -13,7 +13,7 @@ require 'time'
 module SnapTrade
   # The response to the account value history endpoint, containing a list of estimated account values at different points in time.
   class AccountValueHistoryResponse
-    # List of estimated account values over time returned by the endpoint.
+    # List of estimated account values over time returned by the endpoint. The data may contain gaps and is best used for charting trends, rather than as a complete or exact record of historical account values.
     attr_accessor :history
 
     # The ISO-4217 currency code for the account values.

data/lib/snaptrade/models/{account_type.rb → cash_or_margin.rb}

@@ -11,7 +11,7 @@ require 'date'
 require 'time'
 
 module SnapTrade
-  class AccountType
+  class CashOrMargin
     CASH = "cash".freeze
     MARGIN = "margin".freeze
     UNKNOWN = "unknown".freeze
@@ -31,8 +31,8 @@ module SnapTrade
     # @param [String] The enum value in the form of the string
     # @return [String] The enum value
     def build_from_hash(value)
-      return value if AccountType.all_vars.include?(value)
-      raise "Invalid ENUM value #{value} for class #AccountType"
+      return value if CashOrMargin.all_vars.include?(value)
+      raise "Invalid ENUM value #{value} for class #CashOrMargin"
     end
   end
 end

data/lib/snaptrade/models/institution.rb

@@ -34,7 +34,7 @@ module SnapTrade
     # URL of the institution's square logo.
     attr_accessor :square_logo_url
 
-    # How mature the integration is. - `GENERALLY_AVAILABLE`: fully supported and validated for production use. - `BETA`: production-ready, with ongoing validation and improvements. 
+    # How mature the integration is. - `GENERALLY_AVAILABLE`: fully supported and validated for production use. - `BETA`: production-ready, with ongoing validation and improvements. - `ALPHA`: early access with limited validation. Expect issues and incomplete functionality. 
     attr_accessor :release_stage
 
     # Regions where end users can connect to this institution. - `US`: United States - `CA`: Canada - `EUROPE`: Europe, including the United Kingdom - `AU`: Australia - `IN`: India 

data/lib/snaptrade/models/investment_account.rb

@@ -46,7 +46,7 @@ module SnapTrade
     attr_accessor :raw_type
 
     # Whether the institution reports the account as a cash or margin account, normalized across institutions. - `cash`: A cash account. The account cannot borrow on margin. - `margin`: A margin account, including portfolio margin accounts. Some institutions also report retirement accounts with limited margin (for example, trading before funds settle) as margin accounts. - `unknown`: The institution does not report whether the account is cash or margin.  **Beta:** only returned for some institutions and partners it has been enabled for. Omitted otherwise. 
-    attr_accessor :account_type
+    attr_accessor :cash_or_margin
 
     # Indicates whether the account is a paper (simulated) trading account.
     attr_accessor :is_paper
@@ -67,7 +67,7 @@ module SnapTrade
         :'funding_date' => :'funding_date',
         :'sync_status' => :'sync_status',
         :'raw_type' => :'raw_type',
-        :'account_type' => :'account_type',
+        :'cash_or_margin' => :'cash_or_margin',
         :'is_paper' => :'is_paper',
         :'net_value' => :'net_value'
       }
@@ -92,7 +92,7 @@ module SnapTrade
         :'funding_date' => :'Time',
         :'sync_status' => :'ConnectionAccountSyncStatus',
         :'raw_type' => :'String',
-        :'account_type' => :'AccountType',
+        :'cash_or_margin' => :'CashOrMargin',
         :'is_paper' => :'Boolean',
         :'net_value' => :'InvestmentAccountNetValue'
       }
@@ -169,8 +169,8 @@ module SnapTrade
         self.raw_type = attributes[:'raw_type']
       end
 
-      if attributes.key?(:'account_type')
-        self.account_type = attributes[:'account_type']
+      if attributes.key?(:'cash_or_margin')
+        self.cash_or_margin = attributes[:'cash_or_margin']
       end
 
       if attributes.key?(:'is_paper')
@@ -241,7 +241,7 @@ module SnapTrade
           funding_date == o.funding_date &&
           sync_status == o.sync_status &&
           raw_type == o.raw_type &&
-          account_type == o.account_type &&
+          cash_or_margin == o.cash_or_margin &&
           is_paper == o.is_paper &&
           net_value == o.net_value
     end
@@ -255,7 +255,7 @@ module SnapTrade
     # Calculates hash code according to all attributes.
     # @return [Integer] Hash code
     def hash
-      [kind, id, connection_id, display_name, masked_account_number, institution_account_id, institution_id, opening_date, funding_date, sync_status, raw_type, account_type, is_paper, net_value].hash
+      [kind, id, connection_id, display_name, masked_account_number, institution_account_id, institution_id, opening_date, funding_date, sync_status, raw_type, cash_or_margin, is_paper, net_value].hash
     end
 
     # Builds the object from hash

data/lib/snaptrade/models/position.rb

@@ -35,7 +35,7 @@ module SnapTrade
     # If the position is a cash equivalent (usually a money market fund) that is also counted in account cash balance and buying power
     attr_accessor :cash_equivalent
 
-    # List of tax lots for the given position. Disabled by default, only available on paid plans, enable this feature in the [Add-on page of the Customer Dashboard](https://dashboard.snaptrade.com/add-ons)
+    # List of tax lots for the given position. Disabled by default, enable this feature in the [Add-on page of the Customer Dashboard](https://dashboard.snaptrade.com/add-ons)
     attr_accessor :tax_lots
 
     # Attribute mapping from ruby-style variable name to JSON key.

data/lib/snaptrade/models/release_stage.rb

@@ -14,9 +14,10 @@ module SnapTrade
   class ReleaseStage
     GENERALLY_AVAILABLE = "GENERALLY_AVAILABLE".freeze
     BETA = "BETA".freeze
+    ALPHA = "ALPHA".freeze
 
     def self.all_vars
-      @all_vars ||= [GENERALLY_AVAILABLE, BETA].freeze
+      @all_vars ||= [GENERALLY_AVAILABLE, BETA, ALPHA].freeze
     end
 
     # Builds the enum from string