snaptrade 3.0.28 → 3.0.30

data/lib/snaptrade/models/all_user_accounts_response.rb

@@ -0,0 +1,225 @@
+=begin
+#SnapTrade
+
+#Connect brokerage accounts to your app for live positions and trading.  ## Rate limiting  Two limits apply to requests signed with your `clientId`. The stricter one wins, and exceeding either returns `429 Too Many Requests`.  - **Customer-level** — 250 requests/minute by default, scoped to your   `clientId` and applied across all endpoints. Reported in   `X-RateLimit-Limit`, `X-RateLimit-Remaining` and `X-RateLimit-Reset`. - **Account-level** — 10 requests/minute per account, scoped to   (`clientId`, `accountId`). All covered operations for one account draw on   the same bucket — reading balances and reading positions share it — and   enforcement does not depend on the HTTP method, so updating an account   consumes the same bucket as reading it. Only enforced for Personal users,   and only for integrations it has been rolled out to — it is not yet in   force for every Personal integration. It also does not apply on every   operation that documents a 429 below. Where it applies it is reported in   `X-RateLimit-Account-Limit`, `X-RateLimit-Account-Remaining` and   `X-RateLimit-Account-Reset`. Do not read the absence of those headers as   proof the limit is off — some configurations omit the rate limit headers   while still enforcing the limit, so header absence tells you nothing   about your allowance.  On a 429, `X-RateLimit-Remaining: 0` means you hit the customer-level limit and `X-RateLimit-Account-Remaining: 0` means the account-level one. Wait for the corresponding `*-Reset` value (seconds) before retrying, or fall back to exponential backoff with jitter.  Not every 429 is explained by those headers. A separate per-authenticated-user limit, reported in no `X-RateLimit-*` header, covers OAuth-authenticated requests and signed requests in configurations where the customer-level limit is not in effect — on the operations that use the default throttles. A few operations override those and are governed by the customer-level limit alone. The two do not stack: a signed request governed by the customer-level limit above is not additionally subject to the per-user one. If a 429 arrives with no header at zero — or with no `X-RateLimit-*` headers at all — honour `Retry-After` and back off. Treat the remaining counts as a hint, not a guarantee that the next request will succeed.  Because the customer-level limit applies everywhere, any signed request can return 429.  **OAuth-authenticated requests are an exception.** They are not subject to the customer-level limit and do not receive `X-RateLimit-Limit`, `X-RateLimit-Remaining` or `X-RateLimit-Reset` — do not wait on those headers or design around a customer-level allowance on this path. The account-level limit still applies to them on the account-data endpoints above, reported in the `X-RateLimit-Account-*` headers. On operations using the default throttles the per-user limit above applies to them as well, so an OAuth request can be rejected while the account headers still show capacity; on the few operations that override those throttles, OAuth callers have no per-user ceiling at all. Drive retries from `Retry-After` and exponential backoff with jitter rather than from the headers.  See https://docs.snaptrade.com/docs/ratelimiting. 
+
+The version of the OpenAPI document: 1.0.0
+Contact: api@snaptrade.com
+=end
+
+require 'date'
+require 'time'
+
+module SnapTrade
+  # Accounts across all of the user's connections.
+  class AllUserAccountsResponse
+    # Accounts returned for the request.
+    attr_accessor :results
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'results' => :'results'
+      }
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'results' => :'Array<ConnectionAccount>'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `SnapTrade::AllUserAccountsResponse` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!self.class.attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `SnapTrade::AllUserAccountsResponse`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'results')
+        if (value = attributes[:'results']).is_a?(Array)
+          self.results = value
+        end
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      if @results.nil?
+        invalid_properties.push('invalid value for "results", results cannot be nil.')
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      return false if @results.nil?
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          results == o.results
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [results].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      new.build_from_hash(attributes)
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
+      self.class.openapi_types.each_pair do |key, type|
+        if attributes[self.class.attribute_map[key]].nil? && self.class.openapi_nullable.include?(key)
+          self.send("#{key}=", nil)
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :Time
+        Time.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :Boolean
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        # models (e.g. Pet) or oneOf
+        klass = SnapTrade.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end

data/lib/snaptrade/models/connection_account.rb

@@ -11,7 +11,7 @@ require 'date'
 require 'time'
 
 module SnapTrade
-  # A single account under a connection, from the `kind`-discriminated union used by `Connections_listConnectionAccounts`. Use `kind` to determine which schema is present.  `investment`, `deposit`, and `line_of_credit` are implemented today. 
+  # A single account under a connection, from the `kind`-discriminated union used by `Connections_listConnectionAccounts` and `AccountInformation_listAllUserAccounts`. Use `kind` to determine which schema is present.  `investment`, `deposit`, and `line_of_credit` are implemented today. 
   module ConnectionAccount
     class << self
       # List of class defined in oneOf (OpenAPI v3)

data/lib/snaptrade/models/investment_account.rb

@@ -11,7 +11,7 @@ require 'date'
 require 'time'
 
 module SnapTrade
-  # An investment account under a connection. `opening_date`, `funding_date`, and `net_value` are real-time or cached depending on the caller's plan -- see `Connections_listConnectionAccounts`. 
+  # An investment account under a connection. `opening_date`, `funding_date`, and `net_value` are real-time or cached depending on the caller's plan -- see `Connections_listConnectionAccounts` -- and always cached on `AccountInformation_listAllUserAccounts`. 
   class InvestmentAccount
     # Discriminator for the account kind.
     attr_accessor :kind
@@ -45,6 +45,9 @@ module SnapTrade
     # The account type as provided by the institution.
     attr_accessor :raw_type
 
+    # Whether the institution reports the account as a cash or margin account, normalized across institutions. - `cash`: A cash account. The account cannot borrow on margin. - `margin`: A margin account, including portfolio margin accounts. Some institutions also report retirement accounts with limited margin (for example, trading before funds settle) as margin accounts. - `unknown`: The institution does not report whether the account is cash or margin.  **Beta:** only returned for some institutions and partners it has been enabled for. Omitted otherwise. 
+    attr_accessor :account_type
+
     # Indicates whether the account is a paper (simulated) trading account.
     attr_accessor :is_paper
 
@@ -64,6 +67,7 @@ module SnapTrade
         :'funding_date' => :'funding_date',
         :'sync_status' => :'sync_status',
         :'raw_type' => :'raw_type',
+        :'account_type' => :'account_type',
         :'is_paper' => :'is_paper',
         :'net_value' => :'net_value'
       }
@@ -88,6 +92,7 @@ module SnapTrade
         :'funding_date' => :'Time',
         :'sync_status' => :'ConnectionAccountSyncStatus',
         :'raw_type' => :'String',
+        :'account_type' => :'AccountType',
         :'is_paper' => :'Boolean',
         :'net_value' => :'InvestmentAccountNetValue'
       }
@@ -164,6 +169,10 @@ module SnapTrade
         self.raw_type = attributes[:'raw_type']
       end
 
+      if attributes.key?(:'account_type')
+        self.account_type = attributes[:'account_type']
+      end
+
       if attributes.key?(:'is_paper')
         self.is_paper = attributes[:'is_paper']
       end
@@ -232,6 +241,7 @@ module SnapTrade
           funding_date == o.funding_date &&
           sync_status == o.sync_status &&
           raw_type == o.raw_type &&
+          account_type == o.account_type &&
           is_paper == o.is_paper &&
           net_value == o.net_value
     end
@@ -245,7 +255,7 @@ module SnapTrade
     # Calculates hash code according to all attributes.
     # @return [Integer] Hash code
     def hash
-      [kind, id, connection_id, display_name, masked_account_number, institution_account_id, institution_id, opening_date, funding_date, sync_status, raw_type, is_paper, net_value].hash
+      [kind, id, connection_id, display_name, masked_account_number, institution_account_id, institution_id, opening_date, funding_date, sync_status, raw_type, account_type, is_paper, net_value].hash
     end
 
     # Builds the object from hash

data/lib/snaptrade/models/trading_get_user_account_option_quotes410_response.rb

@@ -0,0 +1,216 @@
+=begin
+#SnapTrade
+
+#Connect brokerage accounts to your app for live positions and trading.  ## Rate limiting  Two limits apply to requests signed with your `clientId`. The stricter one wins, and exceeding either returns `429 Too Many Requests`.  - **Customer-level** — 250 requests/minute by default, scoped to your   `clientId` and applied across all endpoints. Reported in   `X-RateLimit-Limit`, `X-RateLimit-Remaining` and `X-RateLimit-Reset`. - **Account-level** — 10 requests/minute per account, scoped to   (`clientId`, `accountId`). All covered operations for one account draw on   the same bucket — reading balances and reading positions share it — and   enforcement does not depend on the HTTP method, so updating an account   consumes the same bucket as reading it. Only enforced for Personal users,   and only for integrations it has been rolled out to — it is not yet in   force for every Personal integration. It also does not apply on every   operation that documents a 429 below. Where it applies it is reported in   `X-RateLimit-Account-Limit`, `X-RateLimit-Account-Remaining` and   `X-RateLimit-Account-Reset`. Do not read the absence of those headers as   proof the limit is off — some configurations omit the rate limit headers   while still enforcing the limit, so header absence tells you nothing   about your allowance.  On a 429, `X-RateLimit-Remaining: 0` means you hit the customer-level limit and `X-RateLimit-Account-Remaining: 0` means the account-level one. Wait for the corresponding `*-Reset` value (seconds) before retrying, or fall back to exponential backoff with jitter.  Not every 429 is explained by those headers. A separate per-authenticated-user limit, reported in no `X-RateLimit-*` header, covers OAuth-authenticated requests and signed requests in configurations where the customer-level limit is not in effect — on the operations that use the default throttles. A few operations override those and are governed by the customer-level limit alone. The two do not stack: a signed request governed by the customer-level limit above is not additionally subject to the per-user one. If a 429 arrives with no header at zero — or with no `X-RateLimit-*` headers at all — honour `Retry-After` and back off. Treat the remaining counts as a hint, not a guarantee that the next request will succeed.  Because the customer-level limit applies everywhere, any signed request can return 429.  **OAuth-authenticated requests are an exception.** They are not subject to the customer-level limit and do not receive `X-RateLimit-Limit`, `X-RateLimit-Remaining` or `X-RateLimit-Reset` — do not wait on those headers or design around a customer-level allowance on this path. The account-level limit still applies to them on the account-data endpoints above, reported in the `X-RateLimit-Account-*` headers. On operations using the default throttles the per-user limit above applies to them as well, so an OAuth request can be rejected while the account headers still show capacity; on the few operations that override those throttles, OAuth callers have no per-user ceiling at all. Drive retries from `Retry-After` and exponential backoff with jitter rather than from the headers.  See https://docs.snaptrade.com/docs/ratelimiting. 
+
+The version of the OpenAPI document: 1.0.0
+Contact: api@snaptrade.com
+=end
+
+require 'date'
+require 'time'
+
+module SnapTrade
+  class TradingGetUserAccountOptionQuotes410Response
+    attr_accessor :detail
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'detail' => :'detail'
+      }
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'detail' => :'String'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `SnapTrade::TradingGetUserAccountOptionQuotes410Response` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!self.class.attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `SnapTrade::TradingGetUserAccountOptionQuotes410Response`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'detail')
+        self.detail = attributes[:'detail']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          detail == o.detail
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [detail].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      new.build_from_hash(attributes)
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
+      self.class.openapi_types.each_pair do |key, type|
+        if attributes[self.class.attribute_map[key]].nil? && self.class.openapi_nullable.include?(key)
+          self.send("#{key}=", nil)
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :Time
+        Time.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :Boolean
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        # models (e.g. Pet) or oneOf
+        klass = SnapTrade.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end

data/lib/snaptrade/version.rb

@@ -8,5 +8,5 @@ Contact: api@snaptrade.com
 =end
 
 module SnapTrade
-  VERSION = '3.0.28'
+  VERSION = '3.0.30'
 end

data/lib/snaptrade.rb

@@ -41,6 +41,7 @@ require 'snaptrade/models/account_position'
 require 'snaptrade/models/account_simple'
 require 'snaptrade/models/account_status'
 require 'snaptrade/models/account_sync_status'
+require 'snaptrade/models/account_type'
 require 'snaptrade/models/account_universal_activity'
 require 'snaptrade/models/account_universal_activity_currency'
 require 'snaptrade/models/account_universal_activity_currency_universal_symbol'
@@ -54,6 +55,7 @@ require 'snaptrade/models/adr_instrument'
 require 'snaptrade/models/adr_instrument_kind'
 require 'snaptrade/models/all_account_positions_response'
 require 'snaptrade/models/all_account_positions_response_data_freshness'
+require 'snaptrade/models/all_user_accounts_response'
 require 'snaptrade/models/auth_type'
 require 'snaptrade/models/authentication_login_snap_trade_user200_response'
 require 'snaptrade/models/balance'
@@ -247,6 +249,7 @@ require 'snaptrade/models/trade_detection_add_subscription_request'
 require 'snaptrade/models/trade_detection_cancel_subscription_request'
 require 'snaptrade/models/trade_detection_cancel_subscription_response'
 require 'snaptrade/models/trade_detection_subscription'
+require 'snaptrade/models/trading_get_user_account_option_quotes410_response'
 require 'snaptrade/models/trading_instrument'
 require 'snaptrade/models/trading_instrument_type'
 require 'snaptrade/models/trading_search_cryptocurrency_pair_instruments200_response'

data/spec/api/experimental_endpoints_api_spec.rb

@@ -53,6 +53,20 @@ describe 'ExperimentalEndpointsApi' do
     end
   end
 
+  # unit tests for get_account_details
+  # Get account details
+  # Experimental and subject to change without notice.  Returns the specified account for the authenticated user, using the `kind`-discriminated account shape. Use the `kind` discriminator to determine the shape of the account, which can be an investment, deposit, or line of credit account.  On Pay as you Go / Real-time, this endpoint refreshes the account's opening date and total net value (`net_value`) live from the institution on each call, along with funding date for `investment` accounts.  On Pay as you Go / Daily, this endpoint returns Daily data. Daily data is cached and refreshed once a day. Exact refresh timing may vary by institution. To force a refresh, use the [manual refresh endpoint](/reference/Connections/Connections_refreshBrokerageAuthorization).  Check your API key on the [Customer Dashboard billing page](https://dashboard.snaptrade.com/settings/billing) to see whether your plan includes real-time data.  If the connection has become disabled, it can no longer access the latest data from the institution, but will continue to return the last available cached state. Please see [this guide](/docs/fix-broken-connections) on how to fix a disabled connection. 
+  # @param user_id 
+  # @param user_secret 
+  # @param account_id 
+  # @param [Hash] opts the optional parameters
+  # @return [ConnectionAccount]
+  describe 'get_account_details test' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
   # unit tests for get_user_account_order_detail_v2
   # Get account order detail (V2)
   # Returns the detail of a single order using the brokerage order ID provided as a path parameter.  The V2 order response format includes all legs of the order in the `legs` list field. If the order is single legged, `legs` will be a list of one leg.  This endpoint is always realtime and does not rely on cached data.  This endpoint only returns orders placed through SnapTrade. In other words, orders placed outside of the SnapTrade network are not returned by this endpoint. 
@@ -99,6 +113,19 @@ describe 'ExperimentalEndpointsApi' do
     end
   end
 
+  # unit tests for list_all_user_accounts
+  # List all user accounts
+  # Experimental and subject to change without notice.  Returns all accounts across all connections known to SnapTrade for the authenticated user.  The `results` list can contain multiple account kinds in the same response, including investment, deposit, and line of credit accounts. Use the `kind` discriminator to determine the shape for each account.  This endpoint returns Daily data regardless of the customer's plan. Daily data is cached and refreshed once a day, which makes this endpoint fast and well-suited to listing accounts across all of a user's connections in a single call. Exact refresh timing may vary by institution. To get real-time data on Pay as you Go / Real-time, use the [list accounts for a connection endpoint](/reference/Connections/Connections_listConnectionAccounts). Customers on Pay as you Go / Daily can force a refresh with the [manual refresh endpoint](/reference/Connections/Connections_refreshBrokerageAuthorization). 
+  # @param user_id 
+  # @param user_secret 
+  # @param [Hash] opts the optional parameters
+  # @return [AllUserAccountsResponse]
+  describe 'list_all_user_accounts test' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
   # unit tests for list_subscriptions
   # List active Trade Detection subscriptions
   # Returns active Trade Detection subscriptions for your Client ID. Cancelled subscriptions are not returned.

data/spec/api/trading_api_spec.rb

@@ -88,7 +88,7 @@ describe 'TradingApi' do
 
   # unit tests for get_user_account_option_quotes
   # Get option quote
-  # Returns a quote for a single option contract. The option contract is specified using in the 21 character OCC format. For example `AAPL  251114C00240000` represents a call option on AAPL expiring on 2025-11-14 with a strike price of $240. For more information on the OCC format, see [here](https://en.wikipedia.org/wiki/Option_symbol#OCC_format) **Note:** These are derived values and are not suitable for trading purposes.  **This Endpoint is deprecated and will cease to return data as of October 1, 2026** 
+  # **Deprecated.** This endpoint was sunset on October 1, 2026 and now always returns `410 Gone`.  Returns a quote for a single option contract. The option contract is specified using in the 21 character OCC format. For example `AAPL  251114C00240000` represents a call option on AAPL expiring on 2025-11-14 with a strike price of $240. For more information on the OCC format, see [here](https://en.wikipedia.org/wiki/Option_symbol#OCC_format) **Note:** These are derived values and are not suitable for trading purposes. 
   # @param user_id 
   # @param user_secret 
   # @param account_id 

data/spec/models/account_type_spec.rb

@@ -0,0 +1,23 @@
+=begin
+#SnapTrade
+
+#Connect brokerage accounts to your app for live positions and trading.  ## Rate limiting  Two limits apply to requests signed with your `clientId`. The stricter one wins, and exceeding either returns `429 Too Many Requests`.  - **Customer-level** — 250 requests/minute by default, scoped to your   `clientId` and applied across all endpoints. Reported in   `X-RateLimit-Limit`, `X-RateLimit-Remaining` and `X-RateLimit-Reset`. - **Account-level** — 10 requests/minute per account, scoped to   (`clientId`, `accountId`). All covered operations for one account draw on   the same bucket — reading balances and reading positions share it — and   enforcement does not depend on the HTTP method, so updating an account   consumes the same bucket as reading it. Only enforced for Personal users,   and only for integrations it has been rolled out to — it is not yet in   force for every Personal integration. It also does not apply on every   operation that documents a 429 below. Where it applies it is reported in   `X-RateLimit-Account-Limit`, `X-RateLimit-Account-Remaining` and   `X-RateLimit-Account-Reset`. Do not read the absence of those headers as   proof the limit is off — some configurations omit the rate limit headers   while still enforcing the limit, so header absence tells you nothing   about your allowance.  On a 429, `X-RateLimit-Remaining: 0` means you hit the customer-level limit and `X-RateLimit-Account-Remaining: 0` means the account-level one. Wait for the corresponding `*-Reset` value (seconds) before retrying, or fall back to exponential backoff with jitter.  Not every 429 is explained by those headers. A separate per-authenticated-user limit, reported in no `X-RateLimit-*` header, covers OAuth-authenticated requests and signed requests in configurations where the customer-level limit is not in effect — on the operations that use the default throttles. A few operations override those and are governed by the customer-level limit alone. The two do not stack: a signed request governed by the customer-level limit above is not additionally subject to the per-user one. If a 429 arrives with no header at zero — or with no `X-RateLimit-*` headers at all — honour `Retry-After` and back off. Treat the remaining counts as a hint, not a guarantee that the next request will succeed.  Because the customer-level limit applies everywhere, any signed request can return 429.  **OAuth-authenticated requests are an exception.** They are not subject to the customer-level limit and do not receive `X-RateLimit-Limit`, `X-RateLimit-Remaining` or `X-RateLimit-Reset` — do not wait on those headers or design around a customer-level allowance on this path. The account-level limit still applies to them on the account-data endpoints above, reported in the `X-RateLimit-Account-*` headers. On operations using the default throttles the per-user limit above applies to them as well, so an OAuth request can be rejected while the account headers still show capacity; on the few operations that override those throttles, OAuth callers have no per-user ceiling at all. Drive retries from `Retry-After` and exponential backoff with jitter rather than from the headers.  See https://docs.snaptrade.com/docs/ratelimiting. 
+
+The version of the OpenAPI document: 1.0.0
+Contact: api@snaptrade.com
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for SnapTrade::AccountType
+describe SnapTrade::AccountType do
+  let(:instance) { SnapTrade::AccountType.new }
+
+  describe 'test an instance of AccountType' do
+    it 'should create an instance of AccountType' do
+      expect(instance).to be_instance_of(SnapTrade::AccountType)
+    end
+  end
+end

data/spec/models/all_user_accounts_response_spec.rb

@@ -0,0 +1,29 @@
+=begin
+#SnapTrade
+
+#Connect brokerage accounts to your app for live positions and trading.  ## Rate limiting  Two limits apply to requests signed with your `clientId`. The stricter one wins, and exceeding either returns `429 Too Many Requests`.  - **Customer-level** — 250 requests/minute by default, scoped to your   `clientId` and applied across all endpoints. Reported in   `X-RateLimit-Limit`, `X-RateLimit-Remaining` and `X-RateLimit-Reset`. - **Account-level** — 10 requests/minute per account, scoped to   (`clientId`, `accountId`). All covered operations for one account draw on   the same bucket — reading balances and reading positions share it — and   enforcement does not depend on the HTTP method, so updating an account   consumes the same bucket as reading it. Only enforced for Personal users,   and only for integrations it has been rolled out to — it is not yet in   force for every Personal integration. It also does not apply on every   operation that documents a 429 below. Where it applies it is reported in   `X-RateLimit-Account-Limit`, `X-RateLimit-Account-Remaining` and   `X-RateLimit-Account-Reset`. Do not read the absence of those headers as   proof the limit is off — some configurations omit the rate limit headers   while still enforcing the limit, so header absence tells you nothing   about your allowance.  On a 429, `X-RateLimit-Remaining: 0` means you hit the customer-level limit and `X-RateLimit-Account-Remaining: 0` means the account-level one. Wait for the corresponding `*-Reset` value (seconds) before retrying, or fall back to exponential backoff with jitter.  Not every 429 is explained by those headers. A separate per-authenticated-user limit, reported in no `X-RateLimit-*` header, covers OAuth-authenticated requests and signed requests in configurations where the customer-level limit is not in effect — on the operations that use the default throttles. A few operations override those and are governed by the customer-level limit alone. The two do not stack: a signed request governed by the customer-level limit above is not additionally subject to the per-user one. If a 429 arrives with no header at zero — or with no `X-RateLimit-*` headers at all — honour `Retry-After` and back off. Treat the remaining counts as a hint, not a guarantee that the next request will succeed.  Because the customer-level limit applies everywhere, any signed request can return 429.  **OAuth-authenticated requests are an exception.** They are not subject to the customer-level limit and do not receive `X-RateLimit-Limit`, `X-RateLimit-Remaining` or `X-RateLimit-Reset` — do not wait on those headers or design around a customer-level allowance on this path. The account-level limit still applies to them on the account-data endpoints above, reported in the `X-RateLimit-Account-*` headers. On operations using the default throttles the per-user limit above applies to them as well, so an OAuth request can be rejected while the account headers still show capacity; on the few operations that override those throttles, OAuth callers have no per-user ceiling at all. Drive retries from `Retry-After` and exponential backoff with jitter rather than from the headers.  See https://docs.snaptrade.com/docs/ratelimiting. 
+
+The version of the OpenAPI document: 1.0.0
+Contact: api@snaptrade.com
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for SnapTrade::AllUserAccountsResponse
+describe SnapTrade::AllUserAccountsResponse do
+  let(:instance) { SnapTrade::AllUserAccountsResponse.new }
+
+  describe 'test an instance of AllUserAccountsResponse' do
+    it 'should create an instance of AllUserAccountsResponse' do
+      expect(instance).to be_instance_of(SnapTrade::AllUserAccountsResponse)
+    end
+  end
+  describe 'test attribute "results"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end