snaptrade 3.0.21 → 3.0.23

data/lib/snaptrade/models/tokenized_asset_instrument.rb

@@ -0,0 +1,277 @@
+=begin
+#SnapTrade
+
+#Connect brokerage accounts to your app for live positions and trading.  ## Rate limiting  Two limits apply to requests signed with your `clientId`. The stricter one wins, and exceeding either returns `429 Too Many Requests`.  - **Customer-level** — 250 requests/minute by default, scoped to your   `clientId` and applied across all endpoints. Reported in   `X-RateLimit-Limit`, `X-RateLimit-Remaining` and `X-RateLimit-Reset`. - **Account-level** — 10 requests/minute per account, scoped to   (`clientId`, `accountId`). All covered operations for one account draw on   the same bucket — reading balances and reading positions share it — and   enforcement does not depend on the HTTP method, so updating an account   consumes the same bucket as reading it. Only enforced for Personal users,   and only for integrations it has been rolled out to — it is not yet in   force for every Personal integration. It also does not apply on every   operation that documents a 429 below. Where it applies it is reported in   `X-RateLimit-Account-Limit`, `X-RateLimit-Account-Remaining` and   `X-RateLimit-Account-Reset`. Do not read the absence of those headers as   proof the limit is off — some configurations omit the rate limit headers   while still enforcing the limit, so header absence tells you nothing   about your allowance.  On a 429, `X-RateLimit-Remaining: 0` means you hit the customer-level limit and `X-RateLimit-Account-Remaining: 0` means the account-level one. Wait for the corresponding `*-Reset` value (seconds) before retrying, or fall back to exponential backoff with jitter.  Not every 429 is explained by those headers. A separate per-authenticated-user limit, reported in no `X-RateLimit-*` header, covers OAuth-authenticated requests and signed requests in configurations where the customer-level limit is not in effect — on the operations that use the default throttles. A few operations override those and are governed by the customer-level limit alone. The two do not stack: a signed request governed by the customer-level limit above is not additionally subject to the per-user one. If a 429 arrives with no header at zero — or with no `X-RateLimit-*` headers at all — honour `Retry-After` and back off. Treat the remaining counts as a hint, not a guarantee that the next request will succeed.  Because the customer-level limit applies everywhere, any signed request can return 429.  **OAuth-authenticated requests are an exception.** They are not subject to the customer-level limit and do not receive `X-RateLimit-Limit`, `X-RateLimit-Remaining` or `X-RateLimit-Reset` — do not wait on those headers or design around a customer-level allowance on this path. The account-level limit still applies to them on the account-data endpoints above, reported in the `X-RateLimit-Account-*` headers. On operations using the default throttles the per-user limit above applies to them as well, so an OAuth request can be rejected while the account headers still show capacity; on the few operations that override those throttles, OAuth callers have no per-user ceiling at all. Drive retries from `Retry-After` and exponential backoff with jitter rather than from the headers.  See https://docs.snaptrade.com/docs/ratelimiting. 
+
+The version of the OpenAPI document: 1.0.0
+Contact: api@snaptrade.com
+=end
+
+require 'date'
+require 'time'
+
+module SnapTrade
+  # Canonical tokenized asset wrapper for a V2 position. Symbol and description duplicate the listed underlying's display metadata for convenience; they are not token-specific identifiers or labels. Currency and exchange metadata are provided only in underlying_instrument. 
+  class TokenizedAssetInstrument
+    # Type of security instrument.
+    attr_accessor :kind
+
+    # Unique identifier for the canonical tokenized asset wrapper.
+    attr_accessor :id
+
+    # Display symbol of the underlying stock or ETF, not a token-specific ticker.
+    attr_accessor :symbol
+
+    # Display name of the underlying stock or ETF, when available.
+    attr_accessor :description
+
+    attr_accessor :underlying_instrument
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'kind' => :'kind',
+        :'id' => :'id',
+        :'symbol' => :'symbol',
+        :'description' => :'description',
+        :'underlying_instrument' => :'underlying_instrument'
+      }
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'kind' => :'TokenizedAssetInstrumentKind',
+        :'id' => :'String',
+        :'symbol' => :'String',
+        :'description' => :'String',
+        :'underlying_instrument' => :'UnderlyingTokenizedAssetInstrument'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `SnapTrade::TokenizedAssetInstrument` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!self.class.attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `SnapTrade::TokenizedAssetInstrument`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'kind')
+        self.kind = attributes[:'kind']
+      end
+
+      if attributes.key?(:'id')
+        self.id = attributes[:'id']
+      end
+
+      if attributes.key?(:'symbol')
+        self.symbol = attributes[:'symbol']
+      end
+
+      if attributes.key?(:'description')
+        self.description = attributes[:'description']
+      end
+
+      if attributes.key?(:'underlying_instrument')
+        self.underlying_instrument = attributes[:'underlying_instrument']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      if @kind.nil?
+        invalid_properties.push('invalid value for "kind", kind cannot be nil.')
+      end
+
+      if @id.nil?
+        invalid_properties.push('invalid value for "id", id cannot be nil.')
+      end
+
+      if @symbol.nil?
+        invalid_properties.push('invalid value for "symbol", symbol cannot be nil.')
+      end
+
+      if @underlying_instrument.nil?
+        invalid_properties.push('invalid value for "underlying_instrument", underlying_instrument cannot be nil.')
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      return false if @kind.nil?
+      return false if @id.nil?
+      return false if @symbol.nil?
+      return false if @underlying_instrument.nil?
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          kind == o.kind &&
+          id == o.id &&
+          symbol == o.symbol &&
+          description == o.description &&
+          underlying_instrument == o.underlying_instrument
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [kind, id, symbol, description, underlying_instrument].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      new.build_from_hash(attributes)
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
+      self.class.openapi_types.each_pair do |key, type|
+        if attributes[self.class.attribute_map[key]].nil? && self.class.openapi_nullable.include?(key)
+          self.send("#{key}=", nil)
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :Time
+        Time.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :Boolean
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        # models (e.g. Pet) or oneOf
+        klass = SnapTrade.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end

data/lib/snaptrade/models/tokenized_asset_instrument_kind.rb

@@ -0,0 +1,36 @@
+=begin
+#SnapTrade
+
+#Connect brokerage accounts to your app for live positions and trading.  ## Rate limiting  Two limits apply to requests signed with your `clientId`. The stricter one wins, and exceeding either returns `429 Too Many Requests`.  - **Customer-level** — 250 requests/minute by default, scoped to your   `clientId` and applied across all endpoints. Reported in   `X-RateLimit-Limit`, `X-RateLimit-Remaining` and `X-RateLimit-Reset`. - **Account-level** — 10 requests/minute per account, scoped to   (`clientId`, `accountId`). All covered operations for one account draw on   the same bucket — reading balances and reading positions share it — and   enforcement does not depend on the HTTP method, so updating an account   consumes the same bucket as reading it. Only enforced for Personal users,   and only for integrations it has been rolled out to — it is not yet in   force for every Personal integration. It also does not apply on every   operation that documents a 429 below. Where it applies it is reported in   `X-RateLimit-Account-Limit`, `X-RateLimit-Account-Remaining` and   `X-RateLimit-Account-Reset`. Do not read the absence of those headers as   proof the limit is off — some configurations omit the rate limit headers   while still enforcing the limit, so header absence tells you nothing   about your allowance.  On a 429, `X-RateLimit-Remaining: 0` means you hit the customer-level limit and `X-RateLimit-Account-Remaining: 0` means the account-level one. Wait for the corresponding `*-Reset` value (seconds) before retrying, or fall back to exponential backoff with jitter.  Not every 429 is explained by those headers. A separate per-authenticated-user limit, reported in no `X-RateLimit-*` header, covers OAuth-authenticated requests and signed requests in configurations where the customer-level limit is not in effect — on the operations that use the default throttles. A few operations override those and are governed by the customer-level limit alone. The two do not stack: a signed request governed by the customer-level limit above is not additionally subject to the per-user one. If a 429 arrives with no header at zero — or with no `X-RateLimit-*` headers at all — honour `Retry-After` and back off. Treat the remaining counts as a hint, not a guarantee that the next request will succeed.  Because the customer-level limit applies everywhere, any signed request can return 429.  **OAuth-authenticated requests are an exception.** They are not subject to the customer-level limit and do not receive `X-RateLimit-Limit`, `X-RateLimit-Remaining` or `X-RateLimit-Reset` — do not wait on those headers or design around a customer-level allowance on this path. The account-level limit still applies to them on the account-data endpoints above, reported in the `X-RateLimit-Account-*` headers. On operations using the default throttles the per-user limit above applies to them as well, so an OAuth request can be rejected while the account headers still show capacity; on the few operations that override those throttles, OAuth callers have no per-user ceiling at all. Drive retries from `Retry-After` and exponential backoff with jitter rather than from the headers.  See https://docs.snaptrade.com/docs/ratelimiting. 
+
+The version of the OpenAPI document: 1.0.0
+Contact: api@snaptrade.com
+=end
+
+require 'date'
+require 'time'
+
+module SnapTrade
+  class TokenizedAssetInstrumentKind
+    TOKENIZED_ASSET = "tokenized_asset".freeze
+
+    def self.all_vars
+      @all_vars ||= [TOKENIZED_ASSET].freeze
+    end
+
+    # Builds the enum from string
+    # @param [String] The enum value in the form of the string
+    # @return [String] The enum value
+    def self.build_from_hash(value)
+      new.build_from_hash(value)
+    end
+
+    # Builds the enum from string
+    # @param [String] The enum value in the form of the string
+    # @return [String] The enum value
+    def build_from_hash(value)
+      return value if TokenizedAssetInstrumentKind.all_vars.include?(value)
+      raise "Invalid ENUM value #{value} for class #TokenizedAssetInstrumentKind"
+    end
+  end
+end

data/lib/snaptrade/models/underlying_tokenized_asset_instrument.rb

@@ -0,0 +1,53 @@
+=begin
+#SnapTrade
+
+#Connect brokerage accounts to your app for live positions and trading.  ## Rate limiting  Two limits apply to requests signed with your `clientId`. The stricter one wins, and exceeding either returns `429 Too Many Requests`.  - **Customer-level** — 250 requests/minute by default, scoped to your   `clientId` and applied across all endpoints. Reported in   `X-RateLimit-Limit`, `X-RateLimit-Remaining` and `X-RateLimit-Reset`. - **Account-level** — 10 requests/minute per account, scoped to   (`clientId`, `accountId`). All covered operations for one account draw on   the same bucket — reading balances and reading positions share it — and   enforcement does not depend on the HTTP method, so updating an account   consumes the same bucket as reading it. Only enforced for Personal users,   and only for integrations it has been rolled out to — it is not yet in   force for every Personal integration. It also does not apply on every   operation that documents a 429 below. Where it applies it is reported in   `X-RateLimit-Account-Limit`, `X-RateLimit-Account-Remaining` and   `X-RateLimit-Account-Reset`. Do not read the absence of those headers as   proof the limit is off — some configurations omit the rate limit headers   while still enforcing the limit, so header absence tells you nothing   about your allowance.  On a 429, `X-RateLimit-Remaining: 0` means you hit the customer-level limit and `X-RateLimit-Account-Remaining: 0` means the account-level one. Wait for the corresponding `*-Reset` value (seconds) before retrying, or fall back to exponential backoff with jitter.  Not every 429 is explained by those headers. A separate per-authenticated-user limit, reported in no `X-RateLimit-*` header, covers OAuth-authenticated requests and signed requests in configurations where the customer-level limit is not in effect — on the operations that use the default throttles. A few operations override those and are governed by the customer-level limit alone. The two do not stack: a signed request governed by the customer-level limit above is not additionally subject to the per-user one. If a 429 arrives with no header at zero — or with no `X-RateLimit-*` headers at all — honour `Retry-After` and back off. Treat the remaining counts as a hint, not a guarantee that the next request will succeed.  Because the customer-level limit applies everywhere, any signed request can return 429.  **OAuth-authenticated requests are an exception.** They are not subject to the customer-level limit and do not receive `X-RateLimit-Limit`, `X-RateLimit-Remaining` or `X-RateLimit-Reset` — do not wait on those headers or design around a customer-level allowance on this path. The account-level limit still applies to them on the account-data endpoints above, reported in the `X-RateLimit-Account-*` headers. On operations using the default throttles the per-user limit above applies to them as well, so an OAuth request can be rejected while the account headers still show capacity; on the few operations that override those throttles, OAuth callers have no per-user ceiling at all. Drive retries from `Retry-After` and exponential backoff with jitter rather than from the headers.  See https://docs.snaptrade.com/docs/ratelimiting. 
+
+The version of the OpenAPI document: 1.0.0
+Contact: api@snaptrade.com
+=end
+
+require 'date'
+require 'time'
+
+module SnapTrade
+  # The listed stock or ETF underlying a tokenized asset.
+  module UnderlyingTokenizedAssetInstrument
+    class << self
+      # List of class defined in oneOf (OpenAPI v3)
+      def openapi_one_of
+        [
+          :'EtfInstrument',
+          :'StockInstrument'
+        ]
+      end
+
+      # Discriminator's property name (OpenAPI v3)
+      def openapi_discriminator_name
+        :'kind'
+      end
+
+      # Discriminator's mapping (OpenAPI v3)
+      def openapi_discriminator_mapping
+        {
+          :'etf' => :'EtfInstrument',
+          :'stock' => :'StockInstrument'
+        }
+      end
+
+      # Builds the object
+      # @param [Mixed] Data to be matched against the list of oneOf items
+      # @return [Object] Returns the model or the data itself
+      def build(data)
+        discriminator_value = data[openapi_discriminator_name]
+        return nil if discriminator_value.nil?
+
+        klass = openapi_discriminator_mapping[discriminator_value.to_s.to_sym]
+        return nil unless klass
+
+        SnapTrade.const_get(klass).build_from_hash(data)
+      end
+    end
+  end
+
+end

data/lib/snaptrade/version.rb

@@ -8,5 +8,5 @@ Contact: api@snaptrade.com
 =end
 
 module SnapTrade
-  VERSION = '3.0.21'
+  VERSION = '3.0.23'
 end

data/lib/snaptrade.rb

@@ -83,6 +83,7 @@ require 'snaptrade/models/complex_order_response'
 require 'snaptrade/models/complex_order_response_type'
 require 'snaptrade/models/connection_account'
 require 'snaptrade/models/connection_account_sync_status'
+require 'snaptrade/models/connection_accounts_response'
 require 'snaptrade/models/connection_portal_version'
 require 'snaptrade/models/connection_type'
 require 'snaptrade/models/crypto_instrument'
@@ -237,6 +238,8 @@ require 'snaptrade/models/take_profit'
 require 'snaptrade/models/tax_lot'
 require 'snaptrade/models/time_in_force_strict'
 require 'snaptrade/models/timeframe'
+require 'snaptrade/models/tokenized_asset_instrument'
+require 'snaptrade/models/tokenized_asset_instrument_kind'
 require 'snaptrade/models/trade_detection_add_subscription_request'
 require 'snaptrade/models/trade_detection_cancel_subscription_request'
 require 'snaptrade/models/trade_detection_cancel_subscription_response'
@@ -254,6 +257,7 @@ require 'snaptrade/models/underlying_option_instrument'
 require 'snaptrade/models/underlying_symbol'
 require 'snaptrade/models/underlying_symbol_exchange'
 require 'snaptrade/models/underlying_symbol_type'
+require 'snaptrade/models/underlying_tokenized_asset_instrument'
 require 'snaptrade/models/universal_activity'
 require 'snaptrade/models/universal_symbol'
 require 'snaptrade/models/user_i_dand_secret'

data/spec/api/account_information_api_spec.rb

@@ -62,7 +62,7 @@ describe 'AccountInformationApi' do
 
   # unit tests for get_all_account_positions
   # List all account positions
-  # Returns a list of all positions in the specified account.  The `results` list can contain multiple instrument types in the same response, including stocks, ADRs, ETFs, mutual funds, closed-end funds, bonds, crypto, futures, option positions, future option positions, and CFD positions. Use the `instrument.kind` discriminator to determine the schema for each position's `instrument`.  **Beta:** future option positions (`instrument.kind: future_option`) are in beta. They are currently returned only for tastytrade and Interactive Brokers connections, and only for partners they have been enabled for — please contact the SnapTrade team to enable them. The `FutureOptionInstrument` schema may change.  Positions counted in account cash balance or buying power include `cash_equivalent: true`. `stock`, `adr`, `etf`, `mutualfund`, and `crypto` positions may include `tax_lots` when tax lot data is enabled for the account. To see which institutions support tax lot data, please see our [supported institutions doc](https://support.snaptrade.com/brokerages).  If the connection has become disabled, it can no longer access the latest data from the brokerage, but will continue to return the last available cached state. Please see [this guide](/docs/fix-broken-connections) on how to fix a disabled connection. 
+  # Returns a list of all positions in the specified account.  The `results` list can contain multiple instrument types in the same response, including stocks, ADRs, ETFs, mutual funds, closed-end funds, bonds, crypto, futures, option positions, future option positions, CFD positions, and tokenized asset positions. Use the `instrument.kind` discriminator to determine the schema for each position's `instrument`.  **Beta:** future option positions (`instrument.kind: future_option`) are in beta. They are currently returned only for tastytrade and Interactive Brokers connections, and only for partners they have been enabled for — please contact the SnapTrade team to enable them. The `FutureOptionInstrument` schema may change.  Positions counted in account cash balance or buying power include `cash_equivalent: true`. `stock`, `adr`, `etf`, `mutualfund`, and `crypto` positions may include `tax_lots` when tax lot data is enabled for the account. To see which institutions support tax lot data, please see our [supported institutions doc](https://support.snaptrade.com/brokerages).  If the connection has become disabled, it can no longer access the latest data from the brokerage, but will continue to return the last available cached state. Please see [this guide](/docs/fix-broken-connections) on how to fix a disabled connection. 
   # @param user_id 
   # @param user_secret 
   # @param account_id 
@@ -178,7 +178,7 @@ describe 'AccountInformationApi' do
   end
 
   # unit tests for list_user_accounts
-  # List accounts
+  # List user accounts
   # Returns all brokerage accounts across all connections known to SnapTrade for the authenticated user.  This endpoint returns Daily data regardless of the customer's plan. Daily data is cached and refreshed once a day, which makes this endpoint fast and well-suited to listing accounts across all of a user's connections in a single call. Exact refresh timing may vary by brokerage. To get real-time data on Pay as you Go / Real-time, use the [list accounts for a connection endpoint](/reference/Connections/Connections_listBrokerageAuthorizationAccounts). Customers on Pay as you Go / Daily can force a refresh with the [manual refresh endpoint](/reference/Connections/Connections_refreshBrokerageAuthorization). 
   # @param user_id 
   # @param user_secret 

data/spec/api/connections_api_spec.rb

@@ -97,13 +97,13 @@ describe 'ConnectionsApi' do
   end
 
   # unit tests for list_connection_accounts
-  # List accounts for a connection (discriminated union)
-  # Returns the accounts that belong to the specified connection for the authenticated user, using the `kind`-discriminated account shape.  Each item in the response carries a `kind` field (`investment`, `deposit`, and `line_of_credit` are implemented) that determines which additional fields are present -- see the `ConnectionAccount` schema.  On Pay as you Go / Real-time, this endpoint refreshes each account's opening date and total net value (`net_value`) live from the institution on each call, along with funding date for `investment` accounts.  On Pay as you Go / Daily, this endpoint returns Daily data. Daily data is cached and refreshed once a day. Exact refresh timing may vary by institution. To force a refresh, use the [manual refresh endpoint](/reference/Connections/Connections_refreshBrokerageAuthorization).  Check your API key on the [Customer Dashboard billing page](https://dashboard.snaptrade.com/settings/billing) to see whether your plan includes real-time data. 
+  # List accounts
+  # Returns all accounts that belong to the specified connection for the authenticated user.  The `results` list can contain multiple account kinds in the same response, including investment, deposit, and line of credit accounts. Use the `kind` discriminator to determine the shape for each account.  On Pay as you Go / Real-time, this endpoint refreshes each account's opening date and total net value (`net_value`) live from the institution on each call, along with funding date for `investment` accounts.  On Pay as you Go / Daily, this endpoint returns Daily data. Daily data is cached and refreshed once a day. Exact refresh timing may vary by institution. To force a refresh, use the [manual refresh endpoint](/reference/Connections/Connections_refreshBrokerageAuthorization).  Check your API key on the [Customer Dashboard billing page](https://dashboard.snaptrade.com/settings/billing) to see whether your plan includes real-time data. 
   # @param connection_id 
   # @param user_id 
   # @param user_secret 
   # @param [Hash] opts the optional parameters
-  # @return [Array<ConnectionAccount>]
+  # @return [ConnectionAccountsResponse]
   describe 'list_connection_accounts test' do
     it 'should work' do
       # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers

data/spec/models/connection_accounts_response_spec.rb

@@ -0,0 +1,29 @@
+=begin
+#SnapTrade
+
+#Connect brokerage accounts to your app for live positions and trading.  ## Rate limiting  Two limits apply to requests signed with your `clientId`. The stricter one wins, and exceeding either returns `429 Too Many Requests`.  - **Customer-level** — 250 requests/minute by default, scoped to your   `clientId` and applied across all endpoints. Reported in   `X-RateLimit-Limit`, `X-RateLimit-Remaining` and `X-RateLimit-Reset`. - **Account-level** — 10 requests/minute per account, scoped to   (`clientId`, `accountId`). All covered operations for one account draw on   the same bucket — reading balances and reading positions share it — and   enforcement does not depend on the HTTP method, so updating an account   consumes the same bucket as reading it. Only enforced for Personal users,   and only for integrations it has been rolled out to — it is not yet in   force for every Personal integration. It also does not apply on every   operation that documents a 429 below. Where it applies it is reported in   `X-RateLimit-Account-Limit`, `X-RateLimit-Account-Remaining` and   `X-RateLimit-Account-Reset`. Do not read the absence of those headers as   proof the limit is off — some configurations omit the rate limit headers   while still enforcing the limit, so header absence tells you nothing   about your allowance.  On a 429, `X-RateLimit-Remaining: 0` means you hit the customer-level limit and `X-RateLimit-Account-Remaining: 0` means the account-level one. Wait for the corresponding `*-Reset` value (seconds) before retrying, or fall back to exponential backoff with jitter.  Not every 429 is explained by those headers. A separate per-authenticated-user limit, reported in no `X-RateLimit-*` header, covers OAuth-authenticated requests and signed requests in configurations where the customer-level limit is not in effect — on the operations that use the default throttles. A few operations override those and are governed by the customer-level limit alone. The two do not stack: a signed request governed by the customer-level limit above is not additionally subject to the per-user one. If a 429 arrives with no header at zero — or with no `X-RateLimit-*` headers at all — honour `Retry-After` and back off. Treat the remaining counts as a hint, not a guarantee that the next request will succeed.  Because the customer-level limit applies everywhere, any signed request can return 429.  **OAuth-authenticated requests are an exception.** They are not subject to the customer-level limit and do not receive `X-RateLimit-Limit`, `X-RateLimit-Remaining` or `X-RateLimit-Reset` — do not wait on those headers or design around a customer-level allowance on this path. The account-level limit still applies to them on the account-data endpoints above, reported in the `X-RateLimit-Account-*` headers. On operations using the default throttles the per-user limit above applies to them as well, so an OAuth request can be rejected while the account headers still show capacity; on the few operations that override those throttles, OAuth callers have no per-user ceiling at all. Drive retries from `Retry-After` and exponential backoff with jitter rather than from the headers.  See https://docs.snaptrade.com/docs/ratelimiting. 
+
+The version of the OpenAPI document: 1.0.0
+Contact: api@snaptrade.com
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for SnapTrade::ConnectionAccountsResponse
+describe SnapTrade::ConnectionAccountsResponse do
+  let(:instance) { SnapTrade::ConnectionAccountsResponse.new }
+
+  describe 'test an instance of ConnectionAccountsResponse' do
+    it 'should create an instance of ConnectionAccountsResponse' do
+      expect(instance).to be_instance_of(SnapTrade::ConnectionAccountsResponse)
+    end
+  end
+  describe 'test attribute "results"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/tokenized_asset_instrument_kind_spec.rb

@@ -0,0 +1,23 @@
+=begin
+#SnapTrade
+
+#Connect brokerage accounts to your app for live positions and trading.  ## Rate limiting  Two limits apply to requests signed with your `clientId`. The stricter one wins, and exceeding either returns `429 Too Many Requests`.  - **Customer-level** — 250 requests/minute by default, scoped to your   `clientId` and applied across all endpoints. Reported in   `X-RateLimit-Limit`, `X-RateLimit-Remaining` and `X-RateLimit-Reset`. - **Account-level** — 10 requests/minute per account, scoped to   (`clientId`, `accountId`). All covered operations for one account draw on   the same bucket — reading balances and reading positions share it — and   enforcement does not depend on the HTTP method, so updating an account   consumes the same bucket as reading it. Only enforced for Personal users,   and only for integrations it has been rolled out to — it is not yet in   force for every Personal integration. It also does not apply on every   operation that documents a 429 below. Where it applies it is reported in   `X-RateLimit-Account-Limit`, `X-RateLimit-Account-Remaining` and   `X-RateLimit-Account-Reset`. Do not read the absence of those headers as   proof the limit is off — some configurations omit the rate limit headers   while still enforcing the limit, so header absence tells you nothing   about your allowance.  On a 429, `X-RateLimit-Remaining: 0` means you hit the customer-level limit and `X-RateLimit-Account-Remaining: 0` means the account-level one. Wait for the corresponding `*-Reset` value (seconds) before retrying, or fall back to exponential backoff with jitter.  Not every 429 is explained by those headers. A separate per-authenticated-user limit, reported in no `X-RateLimit-*` header, covers OAuth-authenticated requests and signed requests in configurations where the customer-level limit is not in effect — on the operations that use the default throttles. A few operations override those and are governed by the customer-level limit alone. The two do not stack: a signed request governed by the customer-level limit above is not additionally subject to the per-user one. If a 429 arrives with no header at zero — or with no `X-RateLimit-*` headers at all — honour `Retry-After` and back off. Treat the remaining counts as a hint, not a guarantee that the next request will succeed.  Because the customer-level limit applies everywhere, any signed request can return 429.  **OAuth-authenticated requests are an exception.** They are not subject to the customer-level limit and do not receive `X-RateLimit-Limit`, `X-RateLimit-Remaining` or `X-RateLimit-Reset` — do not wait on those headers or design around a customer-level allowance on this path. The account-level limit still applies to them on the account-data endpoints above, reported in the `X-RateLimit-Account-*` headers. On operations using the default throttles the per-user limit above applies to them as well, so an OAuth request can be rejected while the account headers still show capacity; on the few operations that override those throttles, OAuth callers have no per-user ceiling at all. Drive retries from `Retry-After` and exponential backoff with jitter rather than from the headers.  See https://docs.snaptrade.com/docs/ratelimiting. 
+
+The version of the OpenAPI document: 1.0.0
+Contact: api@snaptrade.com
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for SnapTrade::TokenizedAssetInstrumentKind
+describe SnapTrade::TokenizedAssetInstrumentKind do
+  let(:instance) { SnapTrade::TokenizedAssetInstrumentKind.new }
+
+  describe 'test an instance of TokenizedAssetInstrumentKind' do
+    it 'should create an instance of TokenizedAssetInstrumentKind' do
+      expect(instance).to be_instance_of(SnapTrade::TokenizedAssetInstrumentKind)
+    end
+  end
+end

data/spec/models/tokenized_asset_instrument_spec.rb

@@ -0,0 +1,53 @@
+=begin
+#SnapTrade
+
+#Connect brokerage accounts to your app for live positions and trading.  ## Rate limiting  Two limits apply to requests signed with your `clientId`. The stricter one wins, and exceeding either returns `429 Too Many Requests`.  - **Customer-level** — 250 requests/minute by default, scoped to your   `clientId` and applied across all endpoints. Reported in   `X-RateLimit-Limit`, `X-RateLimit-Remaining` and `X-RateLimit-Reset`. - **Account-level** — 10 requests/minute per account, scoped to   (`clientId`, `accountId`). All covered operations for one account draw on   the same bucket — reading balances and reading positions share it — and   enforcement does not depend on the HTTP method, so updating an account   consumes the same bucket as reading it. Only enforced for Personal users,   and only for integrations it has been rolled out to — it is not yet in   force for every Personal integration. It also does not apply on every   operation that documents a 429 below. Where it applies it is reported in   `X-RateLimit-Account-Limit`, `X-RateLimit-Account-Remaining` and   `X-RateLimit-Account-Reset`. Do not read the absence of those headers as   proof the limit is off — some configurations omit the rate limit headers   while still enforcing the limit, so header absence tells you nothing   about your allowance.  On a 429, `X-RateLimit-Remaining: 0` means you hit the customer-level limit and `X-RateLimit-Account-Remaining: 0` means the account-level one. Wait for the corresponding `*-Reset` value (seconds) before retrying, or fall back to exponential backoff with jitter.  Not every 429 is explained by those headers. A separate per-authenticated-user limit, reported in no `X-RateLimit-*` header, covers OAuth-authenticated requests and signed requests in configurations where the customer-level limit is not in effect — on the operations that use the default throttles. A few operations override those and are governed by the customer-level limit alone. The two do not stack: a signed request governed by the customer-level limit above is not additionally subject to the per-user one. If a 429 arrives with no header at zero — or with no `X-RateLimit-*` headers at all — honour `Retry-After` and back off. Treat the remaining counts as a hint, not a guarantee that the next request will succeed.  Because the customer-level limit applies everywhere, any signed request can return 429.  **OAuth-authenticated requests are an exception.** They are not subject to the customer-level limit and do not receive `X-RateLimit-Limit`, `X-RateLimit-Remaining` or `X-RateLimit-Reset` — do not wait on those headers or design around a customer-level allowance on this path. The account-level limit still applies to them on the account-data endpoints above, reported in the `X-RateLimit-Account-*` headers. On operations using the default throttles the per-user limit above applies to them as well, so an OAuth request can be rejected while the account headers still show capacity; on the few operations that override those throttles, OAuth callers have no per-user ceiling at all. Drive retries from `Retry-After` and exponential backoff with jitter rather than from the headers.  See https://docs.snaptrade.com/docs/ratelimiting. 
+
+The version of the OpenAPI document: 1.0.0
+Contact: api@snaptrade.com
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for SnapTrade::TokenizedAssetInstrument
+describe SnapTrade::TokenizedAssetInstrument do
+  let(:instance) { SnapTrade::TokenizedAssetInstrument.new }
+
+  describe 'test an instance of TokenizedAssetInstrument' do
+    it 'should create an instance of TokenizedAssetInstrument' do
+      expect(instance).to be_instance_of(SnapTrade::TokenizedAssetInstrument)
+    end
+  end
+  describe 'test attribute "kind"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "id"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "symbol"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "description"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "underlying_instrument"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/underlying_tokenized_asset_instrument_spec.rb

@@ -0,0 +1,38 @@
+=begin
+#SnapTrade
+
+#Connect brokerage accounts to your app for live positions and trading.  ## Rate limiting  Two limits apply to requests signed with your `clientId`. The stricter one wins, and exceeding either returns `429 Too Many Requests`.  - **Customer-level** — 250 requests/minute by default, scoped to your   `clientId` and applied across all endpoints. Reported in   `X-RateLimit-Limit`, `X-RateLimit-Remaining` and `X-RateLimit-Reset`. - **Account-level** — 10 requests/minute per account, scoped to   (`clientId`, `accountId`). All covered operations for one account draw on   the same bucket — reading balances and reading positions share it — and   enforcement does not depend on the HTTP method, so updating an account   consumes the same bucket as reading it. Only enforced for Personal users,   and only for integrations it has been rolled out to — it is not yet in   force for every Personal integration. It also does not apply on every   operation that documents a 429 below. Where it applies it is reported in   `X-RateLimit-Account-Limit`, `X-RateLimit-Account-Remaining` and   `X-RateLimit-Account-Reset`. Do not read the absence of those headers as   proof the limit is off — some configurations omit the rate limit headers   while still enforcing the limit, so header absence tells you nothing   about your allowance.  On a 429, `X-RateLimit-Remaining: 0` means you hit the customer-level limit and `X-RateLimit-Account-Remaining: 0` means the account-level one. Wait for the corresponding `*-Reset` value (seconds) before retrying, or fall back to exponential backoff with jitter.  Not every 429 is explained by those headers. A separate per-authenticated-user limit, reported in no `X-RateLimit-*` header, covers OAuth-authenticated requests and signed requests in configurations where the customer-level limit is not in effect — on the operations that use the default throttles. A few operations override those and are governed by the customer-level limit alone. The two do not stack: a signed request governed by the customer-level limit above is not additionally subject to the per-user one. If a 429 arrives with no header at zero — or with no `X-RateLimit-*` headers at all — honour `Retry-After` and back off. Treat the remaining counts as a hint, not a guarantee that the next request will succeed.  Because the customer-level limit applies everywhere, any signed request can return 429.  **OAuth-authenticated requests are an exception.** They are not subject to the customer-level limit and do not receive `X-RateLimit-Limit`, `X-RateLimit-Remaining` or `X-RateLimit-Reset` — do not wait on those headers or design around a customer-level allowance on this path. The account-level limit still applies to them on the account-data endpoints above, reported in the `X-RateLimit-Account-*` headers. On operations using the default throttles the per-user limit above applies to them as well, so an OAuth request can be rejected while the account headers still show capacity; on the few operations that override those throttles, OAuth callers have no per-user ceiling at all. Drive retries from `Retry-After` and exponential backoff with jitter rather than from the headers.  See https://docs.snaptrade.com/docs/ratelimiting. 
+
+The version of the OpenAPI document: 1.0.0
+Contact: api@snaptrade.com
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for SnapTrade::UnderlyingTokenizedAssetInstrument
+describe SnapTrade::UnderlyingTokenizedAssetInstrument do
+  describe '.openapi_one_of' do
+    it 'lists the items referenced in the oneOf array' do
+      expect(described_class.openapi_one_of).to_not be_empty
+    end
+  end
+
+  describe '.openapi_discriminator_name' do
+    it 'returns the value of the "discriminator" property' do
+      expect(described_class.openapi_discriminator_name).to_not be_empty
+    end
+  end
+
+  describe '.openapi_discriminator_mapping' do
+    it 'returns the key/values of the "mapping" property' do
+      expect(described_class.openapi_discriminator_mapping.values.uniq.sort).to eq(described_class.openapi_one_of.sort)
+    end
+  end
+
+  describe '.build' do
+    it 'returns the correct model' do
+    end
+  end
+end