smparkes-johnson 1.1.2.3

data/vendor/tracemonkey/xpconnect/loader/ISO8601DateUtils.jsm

@@ -0,0 +1,176 @@
+/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is Robert Sayre.
+ * Portions created by the Initial Developer are Copyright (C) 2006
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ * Flock Inc. <erwan@flock.com>
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+const HOURS_TO_MINUTES = 60;
+const MINUTES_TO_SECONDS = 60;
+const SECONDS_TO_MILLISECONDS = 1000;
+const MINUTES_TO_MILLISECONDS = MINUTES_TO_SECONDS * SECONDS_TO_MILLISECONDS;
+const HOURS_TO_MILLISECONDS = HOURS_TO_MINUTES * MINUTES_TO_MILLISECONDS;
+
+var EXPORTED_SYMBOLS = ["ISO8601DateUtils"];
+
+debug("*** loading ISO8601DateUtils\n");
+
+var ISO8601DateUtils = {
+
+  /**
+  * XXX Thunderbird's W3C-DTF function
+  *
+  * Converts a W3C-DTF (subset of ISO 8601) date string to a Javascript
+  * date object. W3C-DTF is described in this note:
+  * http://www.w3.org/TR/NOTE-datetime IETF is obtained via the Date
+  * object's toUTCString() method.  The object's toString() method is
+  * insufficient because it spells out timezones on Win32
+  * (f.e. "Pacific Standard Time" instead of "PST"), which Mail doesn't
+  * grok.  For info, see
+  * http://lxr.mozilla.org/mozilla/source/js/src/jsdate.c#1526.
+  */
+  parse: function ISO8601_parse(aDateString) {
+    var dateString = aDateString;
+    if (!dateString.match('-')) {
+      // Workaround for server sending
+      // dates such as: 20030530T11:18:50-08:00
+      // instead of: 2003-05-30T11:18:50-08:00
+      var year = dateString.slice(0, 4);
+      var month = dateString.slice(4, 6);
+      var rest = dateString.slice(6, dateString.length);
+      dateString = year + "-" + month + "-" + rest;
+    }
+
+    var parts = dateString.match(/(\d{4})(-(\d{2,3}))?(-(\d{2}))?(T(\d{2}):(\d{2})(:(\d{2})(\.(\d+))?)?(Z|([+-])(\d{2}):(\d{2}))?)?/);
+
+    // Here's an example of a W3C-DTF date string and what .match returns for it.
+    //
+    // date: 2003-05-30T11:18:50.345-08:00
+    // date.match returns array values:
+    //
+    //   0: 2003-05-30T11:18:50-08:00,
+    //   1: 2003,
+    //   2: -05,
+    //   3: 05,
+    //   4: -30,
+    //   5: 30,
+    //   6: T11:18:50-08:00,
+    //   7: 11,
+    //   8: 18,
+    //   9: :50,
+    //   10: 50,
+    //   11: .345,
+    //   12: 345,
+    //   13: -08:00,
+    //   14: -,
+    //   15: 08,
+    //   16: 00
+
+    // Create a Date object from the date parts.  Note that the Date
+    // object apparently can't deal with empty string parameters in lieu
+    // of numbers, so optional values (like hours, minutes, seconds, and
+    // milliseconds) must be forced to be numbers.
+    var date = new Date(parts[1], parts[3] - 1, parts[5], parts[7] || 0,
+      parts[8] || 0, parts[10] || 0, parts[12] || 0);
+
+    // We now have a value that the Date object thinks is in the local
+    // timezone but which actually represents the date/time in the
+    // remote timezone (f.e. the value was "10:00 EST", and we have
+    // converted it to "10:00 PST" instead of "07:00 PST").  We need to
+    // correct that.  To do so, we're going to add the offset between
+    // the remote timezone and UTC (to convert the value to UTC), then
+    // add the offset between UTC and the local timezone //(to convert
+    // the value to the local timezone).
+
+    // Ironically, W3C-DTF gives us the offset between UTC and the
+    // remote timezone rather than the other way around, while the
+    // getTimezoneOffset() method of a Date object gives us the offset
+    // between the local timezone and UTC rather than the other way
+    // around.  Both of these are the additive inverse (i.e. -x for x)
+    // of what we want, so we have to invert them to use them by
+    // multipying by -1 (f.e. if "the offset between UTC and the remote
+    // timezone" is -5 hours, then "the offset between the remote
+    // timezone and UTC" is -5*-1 = 5 hours).
+
+    // Note that if the timezone portion of the date/time string is
+    // absent (which violates W3C-DTF, although ISO 8601 allows it), we
+    // assume the value to be in UTC.
+
+    // The offset between the remote timezone and UTC in milliseconds.
+    var remoteToUTCOffset = 0;
+    if (parts[13] && parts[13] != "Z") {
+      var direction = (parts[14] == "+" ? 1 : -1);
+      if (parts[15])
+        remoteToUTCOffset += direction * parts[15] * HOURS_TO_MILLISECONDS;
+      if (parts[16])
+        remoteToUTCOffset += direction * parts[16] * MINUTES_TO_MILLISECONDS;
+    }
+    remoteToUTCOffset = remoteToUTCOffset * -1; // invert it
+
+    // The offset between UTC and the local timezone in milliseconds.
+    var UTCToLocalOffset = date.getTimezoneOffset() * MINUTES_TO_MILLISECONDS;
+    UTCToLocalOffset = UTCToLocalOffset * -1; // invert it
+    date.setTime(date.getTime() + remoteToUTCOffset + UTCToLocalOffset);
+
+    return date;
+  },
+
+  create: function ISO8601_create(aDate) {
+    function zeropad (s, l) {
+      s = s.toString(); // force it to a string
+      while (s.length < l) {
+        s = '0' + s;
+      }
+      return s;
+    }
+
+    var myDate;
+    // if d is a number, turn it into a date
+    if (typeof aDate == 'number') {
+      myDate = new Date()
+      myDate.setTime(aDate);
+    } else {
+      myDate = aDate;
+    }
+
+    // YYYY-MM-DDThh:mm:ssZ
+    var result = zeropad(myDate.getUTCFullYear (), 4) +
+                 zeropad(myDate.getUTCMonth () + 1, 2) +
+                 zeropad(myDate.getUTCDate (), 2) + 'T' +
+                 zeropad(myDate.getUTCHours (), 2) + ':' +
+                 zeropad(myDate.getUTCMinutes (), 2) + ':' +
+                 zeropad(myDate.getUTCSeconds (), 2) + 'Z';
+
+    return result;
+  }
+}

data/vendor/tracemonkey/xpconnect/loader/Makefile.in

@@ -0,0 +1,63 @@
+# ***** BEGIN LICENSE BLOCK *****
+# Version: MPL 1.1/GPL 2.0/LGPL 2.1
+#
+# The contents of this file are subject to the Mozilla Public License Version
+# 1.1 (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+# http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+# for the specific language governing rights and limitations under the
+# License.
+#
+# The Original Code is Mozilla code.
+#
+# The Initial Developer of the Original Code is
+# Netscape Communications Corporation.
+# Portions created by the Initial Developer are Copyright (C) 1999
+# the Initial Developer. All Rights Reserved.
+#
+# Contributor(s):
+#
+# Alternatively, the contents of this file may be used under the terms of
+# either of the GNU General Public License Version 2 or later (the "GPL"),
+# or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+# in which case the provisions of the GPL or the LGPL are applicable instead
+# of those above. If you wish to allow use of your version of this file only
+# under the terms of either the GPL or the LGPL, and not to allow others to
+# use your version of this file under the terms of the MPL, indicate your
+# decision by deleting the provisions above and replace them with the notice
+# and other provisions required by the GPL or the LGPL. If you do not delete
+# the provisions above, a recipient may use your version of this file under
+# the terms of any one of the MPL, the GPL or the LGPL.
+#
+# ***** END LICENSE BLOCK *****
+
+DEPTH 		= ../../../..
+topsrcdir	= @top_srcdir@
+srcdir		= @srcdir@
+VPATH		= @srcdir@
+
+include $(DEPTH)/config/autoconf.mk
+
+MODULE		= jsloader
+LIBRARY_NAME	= jsloader_s
+FORCE_STATIC_LIB = 1
+LIBXUL_LIBRARY = 1
+
+REQUIRES	= xpcom \
+		  string \
+		  xpconnect \
+		  js \
+		  caps \
+		  necko \
+		  $(NULL)
+
+CPPSRCS		= mozJSComponentLoader.cpp mozJSSubScriptLoader.cpp
+
+EXTRA_JS_MODULES = XPCOMUtils.jsm ISO8601DateUtils.jsm
+
+include $(topsrcdir)/config/rules.mk
+
+DEFINES		+= -DJSFILE -DJS_THREADSAFE

data/vendor/tracemonkey/xpconnect/loader/XPCOMUtils.jsm

@@ -0,0 +1,267 @@
+/*
+ * ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is Mozilla code.
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 2004
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *    Alex Fritze <alex@croczilla.com> (original author)
+ *    Nickolay Ponomarev <asqueella@gmail.com>
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+/**
+ * Utilities for JavaScript components loaded by the JS component
+ * loader.
+ *
+ * Import into a JS component using
+ * 'Components.utils.import("resource://gre/modules/XPCOMUtils.jsm");'
+ *
+ * Exposing a JS 'class' as a component using these utility methods consists
+ * of several steps:
+ * 0. Import XPCOMUtils, as described above.
+ * 1. Declare the 'class' (or multiple classes) implementing the component(s):
+ *  function MyComponent() {
+ *    // constructor
+ *  }
+ *  MyComponent.prototype = {
+ *    // properties required for XPCOM registration:
+ *    classDescription: "unique text description",
+ *    classID:          Components.ID("{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}"),
+ *    contractID:       "@example.com/xxx;1",
+ *
+ *    // [optional] custom factory (an object implementing nsIFactory). If not
+ *    // provided, the default factory is used, which returns
+ *    // |(new MyComponent()).QueryInterface(iid)| in its createInstance().
+ *    _xpcom_factory: { ... },
+ *
+ *    // [optional] an array of categories to register this component in.
+ *    _xpcom_categories: [{
+ *      // Each object in the array specifies the parameters to pass to
+ *      // nsICategoryManager.addCategoryEntry(). 'true' is passed for
+ *      // both aPersist and aReplace params.
+ *      category: "some-category",
+ *      // optional, defaults to the object's classDescription
+ *      entry: "entry name",
+ *      // optional, defaults to the object's contractID (unless
+ *      // 'service' is specified)
+ *      value: "...",
+ *      // optional, defaults to false. When set to true, and only if 'value'
+ *      // is not specified, the concatenation of the string "service," and the
+ *      // object's contractID is passed as aValue parameter of addCategoryEntry.
+ *      service: true
+ *    }],
+ *
+ *    // QueryInterface implementation, e.g. using the generateQI helper
+ *    QueryInterface: XPCOMUtils.generateQI(
+ *      [Components.interfaces.nsIObserver,
+ *       Components.interfaces.nsIMyInterface]),
+ *
+ *    // ...component implementation...
+ *  };
+ *
+ * 2. Create an array of component constructors (like the one
+ * created in step 1):
+ *  var components = [MyComponent];
+ *
+ * 3. Define the NSGetModule entry point:
+ *  function NSGetModule(compMgr, fileSpec) {
+ *    // components is the array created in step 2.
+ *    return XPCOMUtils.generateModule(components);
+ *  }
+ */
+
+
+var EXPORTED_SYMBOLS = [ "XPCOMUtils" ];
+
+const Ci = Components.interfaces;
+const Cr = Components.results;
+
+var XPCOMUtils = {
+  /**
+   * Generate a QueryInterface implementation. The returned function must be
+   * assigned to the 'QueryInterface' property of a JS object. When invoked on
+   * that object, it checks if the given iid is listed in the |interfaces|
+   * param, and if it is, returns |this| (the object it was called on).
+   */
+  generateQI: function(interfaces) {
+    return makeQI([i.name for each (i in interfaces) if (i)]);
+  },
+
+  /**
+   * Generate the NSGetModule function (along with the module definition).
+   * See the parameters to generateModule.
+   */
+  generateNSGetModule: function(componentsArray, postRegister, preUnregister) {
+    return function NSGetModule(compMgr, fileSpec) {
+      return XPCOMUtils.generateModule(componentsArray,
+                                       postRegister,
+                                       preUnregister);
+    }
+  },
+
+  /**
+   * Generate a module implementation.
+   *
+   * @param componentsArray  Array of component constructors. See the comment
+   *                         at the top of this file for details.
+   * @param postRegister  optional post-registration function with
+   *                      signature 'postRegister(nsIComponentManager,
+   *                                              nsIFile, componentsArray)'
+   * @param preUnregister optional pre-unregistration function with
+   *                      signature 'preUnregister(nsIComponentManager,
+   *                                               nsIFile, componentsArray)'
+   */
+  generateModule: function(componentsArray, postRegister, preUnregister) {
+    let classes = [];
+    for each (let component in componentsArray) {
+      classes.push({
+        cid:          component.prototype.classID,
+        className:    component.prototype.classDescription,
+        contractID:   component.prototype.contractID,
+        factory:      this._getFactory(component),
+        categories:   component.prototype._xpcom_categories
+      });
+    }
+
+    return { // nsIModule impl.
+      getClassObject: function(compMgr, cid, iid) {
+        // We only support nsIFactory queries, not nsIClassInfo
+        if (!iid.equals(Ci.nsIFactory))
+          throw Cr.NS_ERROR_NOT_IMPLEMENTED;
+
+        for each (let classDesc in classes) {
+          if (classDesc.cid.equals(cid))
+            return classDesc.factory;
+        }
+
+        throw Cr.NS_ERROR_FACTORY_NOT_REGISTERED;
+      },
+
+      registerSelf: function(compMgr, fileSpec, location, type) {
+        var componentCount = 0;
+        debug("*** registering " + fileSpec.leafName + ": [ ");
+        compMgr.QueryInterface(Ci.nsIComponentRegistrar);
+
+        for each (let classDesc in classes) {
+          debug((componentCount++ ? ", " : "") + classDesc.className);
+          compMgr.registerFactoryLocation(classDesc.cid,
+                                          classDesc.className,
+                                          classDesc.contractID,
+                                          fileSpec,
+                                          location,
+                                          type);
+          if (classDesc.categories) {
+            let catMan = XPCOMUtils.categoryManager;
+            for each (let cat in classDesc.categories) {
+              let defaultValue = (cat.service ? "service," : "") +
+                                 classDesc.contractID;
+              catMan.addCategoryEntry(cat.category,
+                                      cat.entry || classDesc.className,
+                                      cat.value || defaultValue,
+                                      true, true);
+            }
+          }
+        }
+
+        if (postRegister)
+          postRegister(compMgr, fileSpec, componentsArray);
+        debug(" ]\n");
+      },
+
+      unregisterSelf: function(compMgr, fileSpec, location) {
+        var componentCount = 0;
+        debug("*** unregistering " + fileSpec.leafName + ": [ ");
+        compMgr.QueryInterface(Ci.nsIComponentRegistrar);
+        if (preUnregister)
+          preUnregister(compMgr, fileSpec, componentsArray);
+
+        for each (let classDesc in classes) {
+          debug((componentCount++ ? ", " : "") + classDesc.className);
+          if (classDesc.categories) {
+            let catMan = XPCOMUtils.categoryManager;
+            for each (let cat in classDesc.categories) {
+              catMan.deleteCategoryEntry(cat.category,
+                                         cat.entry || classDesc.className,
+                                         true);
+            }
+          }
+          compMgr.unregisterFactoryLocation(classDesc.cid, fileSpec);
+        }
+        debug(" ]\n");
+      },
+
+      canUnload: function(compMgr) {
+        return true;
+      }
+    };
+  },
+
+  /**
+   * Convenience access to category manager
+   */
+  get categoryManager() {
+    return Components.classes["@mozilla.org/categorymanager;1"]
+           .getService(Ci.nsICategoryManager);
+  },
+
+  /**
+   * Returns an nsIFactory for |component|.
+   */
+  _getFactory: function(component) {
+    var factory = component.prototype._xpcom_factory;
+    if (!factory) {
+      factory = {
+        createInstance: function(outer, iid) {
+          if (outer)
+            throw Cr.NS_ERROR_NO_AGGREGATION;
+          return (new component()).QueryInterface(iid);
+        }
+      }
+    }
+    return factory;
+  }
+};
+
+/**
+ * Helper for XPCOMUtils.generateQI to avoid leaks - see bug 381651#c1
+ */
+function makeQI(interfaceNames) {
+  return function XPCOMUtils_QueryInterface(iid) {
+    if (iid.equals(Ci.nsISupports))
+      return this;
+    for each(let interfaceName in interfaceNames) {
+      if (Ci[interfaceName].equals(iid))
+        return this;
+    }
+
+    throw Cr.NS_ERROR_NO_INTERFACE;
+  };
+}