smock 0.1.9 → 0.1.10

data/node_modules/webpack/node_modules/node-libs-browser/node_modules/browserify-zlib/node_modules/pako/benchmark/implementations/deflate-gildas/deflate.js

@@ -1,2171 +0,0 @@
-/*
- Copyright (c) 2013 Gildas Lormeau. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
-
- 1. Redistributions of source code must retain the above copyright notice,
- this list of conditions and the following disclaimer.
-
- 2. Redistributions in binary form must reproduce the above copyright 
- notice, this list of conditions and the following disclaimer in 
- the documentation and/or other materials provided with the distribution.
-
- 3. The names of the authors may not be used to endorse or promote products
- derived from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES,
- INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
- FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL JCRAFT,
- INC. OR ANY CONTRIBUTORS TO THIS SOFTWARE BE LIABLE FOR ANY DIRECT, INDIRECT,
- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
- OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*
- * This program is based on JZlib 1.0.2 ymnk, JCraft,Inc.
- * JZlib is based on zlib-1.1.3, so all credit should go authors
- * Jean-loup Gailly(jloup@gzip.org) and Mark Adler(madler@alumni.caltech.edu)
- * and contributors of zlib.
- */
-
-/*
- Based on https://github.com/gildas-lormeau/zip.js/tree/master/WebContent
-
- Changes by Vitaly Puzrin (github.com/puzrin), 2013
-
- - Added deflate header/adler32
- - Added regular arrays support for old browsers
-
- */
-
-var CAN_AB =  (typeof Uint8Array !== 'undefined') &&
-              (typeof Uint16Array !== 'undefined') &&
-              (typeof Uint32Array !== 'undefined');
-
-	// Global
-
-var MAX_BITS = 15;
-var D_CODES = 30;
-var BL_CODES = 19;
-
-var LENGTH_CODES = 29;
-var LITERALS = 256;
-var L_CODES = (LITERALS + 1 + LENGTH_CODES);
-var HEAP_SIZE = (2 * L_CODES + 1);
-
-var END_BLOCK = 256;
-
-// Bit length codes must not exceed MAX_BL_BITS bits
-var MAX_BL_BITS = 7;
-
-// repeat previous bit length 3-6 times (2 bits of repeat count)
-var REP_3_6 = 16;
-
-// repeat a zero length 3-10 times (3 bits of repeat count)
-var REPZ_3_10 = 17;
-
-// repeat a zero length 11-138 times (7 bits of repeat count)
-var REPZ_11_138 = 18;
-
-// The lengths of the bit length codes are sent in order of decreasing
-// probability, to avoid transmitting the lengths for unused bit
-// length codes.
-
-var Buf_size = 8 * 2;
-
-// JZlib version : "1.0.2"
-var Z_DEFAULT_COMPRESSION = -1;
-
-// compression strategy
-var Z_FILTERED = 1;
-var Z_HUFFMAN_ONLY = 2;
-var Z_DEFAULT_STRATEGY = 0;
-
-var Z_NO_FLUSH = 0;
-var Z_PARTIAL_FLUSH = 1;
-var Z_FULL_FLUSH = 3;
-var Z_FINISH = 4;
-
-var Z_OK = 0;
-var Z_STREAM_END = 1;
-var Z_NEED_DICT = 2;
-var Z_STREAM_ERROR = -2;
-var Z_DATA_ERROR = -3;
-var Z_BUF_ERROR = -5;
-
-// Tree
-
-// see definition of array dist_code below
-var _dist_code = [ 0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 6, 7, 7, 7, 7, 8, 8, 8, 8, 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10,
-		10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
-		12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
-		13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
-		14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
-		14, 14, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
-		15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 0, 0, 16, 17, 18, 18, 19, 19,
-		20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
-		24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
-		26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
-		27, 27, 27, 27, 27, 27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
-		28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 29,
-		29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
-		29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29 ];
-
-function Tree() {
-	var that = this;
-
-	// dyn_tree; // the dynamic tree
-	// max_code; // largest code with non zero frequency
-	// stat_desc; // the corresponding static tree
-
-	// Compute the optimal bit lengths for a tree and update the total bit
-	// length
-	// for the current block.
-	// IN assertion: the fields freq and dad are set, heap[heap_max] and
-	// above are the tree nodes sorted by increasing frequency.
-	// OUT assertions: the field len is set to the optimal bit length, the
-	// array bl_count contains the frequencies for each bit length.
-	// The length opt_len is updated; static_len is also updated if stree is
-	// not null.
-	function gen_bitlen(s) {
-		var tree = that.dyn_tree;
-		var stree = that.stat_desc.static_tree;
-		var extra = that.stat_desc.extra_bits;
-		var base = that.stat_desc.extra_base;
-		var max_length = that.stat_desc.max_length;
-		var h; // heap index
-		var n, m; // iterate over the tree elements
-		var bits; // bit length
-		var xbits; // extra bits
-		var f; // frequency
-		var overflow = 0; // number of elements with bit length too large
-
-		for (bits = 0; bits <= MAX_BITS; bits++)
-			s.bl_count[bits] = 0;
-
-		// In a first pass, compute the optimal bit lengths (which may
-		// overflow in the case of the bit length tree).
-		tree[s.heap[s.heap_max] * 2 + 1] = 0; // root of the heap
-
-		for (h = s.heap_max + 1; h < HEAP_SIZE; h++) {
-			n = s.heap[h];
-			bits = tree[tree[n * 2 + 1] * 2 + 1] + 1;
-			if (bits > max_length) {
-				bits = max_length;
-				overflow++;
-			}
-			tree[n * 2 + 1] = bits;
-			// We overwrite tree[n*2+1] which is no longer needed
-
-			if (n > that.max_code)
-				continue; // not a leaf node
-
-			s.bl_count[bits]++;
-			xbits = 0;
-			if (n >= base)
-				xbits = extra[n - base];
-			f = tree[n * 2];
-			s.opt_len += f * (bits + xbits);
-			if (stree)
-				s.static_len += f * (stree[n * 2 + 1] + xbits);
-		}
-		if (overflow === 0)
-			return;
-
-		// This happens for example on obj2 and pic of the Calgary corpus
-		// Find the first bit length which could increase:
-		do {
-			bits = max_length - 1;
-			while (s.bl_count[bits] === 0)
-				bits--;
-			s.bl_count[bits]--; // move one leaf down the tree
-			s.bl_count[bits + 1] += 2; // move one overflow item as its brother
-			s.bl_count[max_length]--;
-			// The brother of the overflow item also moves one step up,
-			// but this does not affect bl_count[max_length]
-			overflow -= 2;
-		} while (overflow > 0);
-
-		for (bits = max_length; bits !== 0; bits--) {
-			n = s.bl_count[bits];
-			while (n !== 0) {
-				m = s.heap[--h];
-				if (m > that.max_code)
-					continue;
-				if (tree[m * 2 + 1] != bits) {
-					s.opt_len += (bits - tree[m * 2 + 1]) * tree[m * 2];
-					tree[m * 2 + 1] = bits;
-				}
-				n--;
-			}
-		}
-	}
-
-	// Reverse the first len bits of a code, using straightforward code (a
-	// faster
-	// method would use a table)
-	// IN assertion: 1 <= len <= 15
-	function bi_reverse(code, // the value to invert
-	len // its bit length
-	) {
-		var res = 0;
-		do {
-			res |= code & 1;
-			code >>>= 1;
-			res <<= 1;
-		} while (--len > 0);
-		return res >>> 1;
-	}
-
-	// Generate the codes for a given tree and bit counts (which need not be
-	// optimal).
-	// IN assertion: the array bl_count contains the bit length statistics for
-	// the given tree and the field len is set for all tree elements.
-	// OUT assertion: the field code is set for all tree elements of non
-	// zero code length.
-	function gen_codes(tree, // the tree to decorate
-	max_code, // largest code with non zero frequency
-	bl_count // number of codes at each bit length
-	) {
-		var next_code = []; // next code value for each
-		// bit length
-		var code = 0; // running code value
-		var bits; // bit index
-		var n; // code index
-		var len;
-
-		// The distribution counts are first used to generate the code values
-		// without bit reversal.
-		for (bits = 1; bits <= MAX_BITS; bits++) {
-			next_code[bits] = code = ((code + bl_count[bits - 1]) << 1);
-		}
-
-		// Check that the bit counts in bl_count are consistent. The last code
-		// must be all ones.
-		// Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
-		// "inconsistent bit counts");
-		// Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
-
-		for (n = 0; n <= max_code; n++) {
-			len = tree[n * 2 + 1];
-			if (len === 0)
-				continue;
-			// Now reverse the bits
-			tree[n * 2] = bi_reverse(next_code[len]++, len);
-		}
-	}
-
-	// Construct one Huffman tree and assigns the code bit strings and lengths.
-	// Update the total bit length for the current block.
-	// IN assertion: the field freq is set for all tree elements.
-	// OUT assertions: the fields len and code are set to the optimal bit length
-	// and corresponding code. The length opt_len is updated; static_len is
-	// also updated if stree is not null. The field max_code is set.
-	that.build_tree = function(s) {
-		var tree = that.dyn_tree;
-		var stree = that.stat_desc.static_tree;
-		var elems = that.stat_desc.elems;
-		var n, m; // iterate over heap elements
-		var max_code = -1; // largest code with non zero frequency
-		var node; // new node being created
-
-		// Construct the initial heap, with least frequent element in
-		// heap[1]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
-		// heap[0] is not used.
-		s.heap_len = 0;
-		s.heap_max = HEAP_SIZE;
-
-		for (n = 0; n < elems; n++) {
-			if (tree[n * 2] !== 0) {
-				s.heap[++s.heap_len] = max_code = n;
-				s.depth[n] = 0;
-			} else {
-				tree[n * 2 + 1] = 0;
-			}
-		}
-
-		// The pkzip format requires that at least one distance code exists,
-		// and that at least one bit should be sent even if there is only one
-		// possible code. So to avoid special checks later on we force at least
-		// two codes of non zero frequency.
-		while (s.heap_len < 2) {
-			node = s.heap[++s.heap_len] = max_code < 2 ? ++max_code : 0;
-			tree[node * 2] = 1;
-			s.depth[node] = 0;
-			s.opt_len--;
-			if (stree)
-				s.static_len -= stree[node * 2 + 1];
-			// node is 0 or 1 so it does not have extra bits
-		}
-		that.max_code = max_code;
-
-		// The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
-		// establish sub-heaps of increasing lengths:
-
-		for (n = Math.floor(s.heap_len / 2); n >= 1; n--)
-			s.pqdownheap(tree, n);
-
-		// Construct the Huffman tree by repeatedly combining the least two
-		// frequent nodes.
-
-		node = elems; // next internal node of the tree
-		do {
-			// n = node of least frequency
-			n = s.heap[1];
-			s.heap[1] = s.heap[s.heap_len--];
-			s.pqdownheap(tree, 1);
-			m = s.heap[1]; // m = node of next least frequency
-
-			s.heap[--s.heap_max] = n; // keep the nodes sorted by frequency
-			s.heap[--s.heap_max] = m;
-
-			// Create a new node father of n and m
-			tree[node * 2] = (tree[n * 2] + tree[m * 2]);
-			s.depth[node] = Math.max(s.depth[n], s.depth[m]) + 1;
-			tree[n * 2 + 1] = tree[m * 2 + 1] = node;
-
-			// and insert the new node in the heap
-			s.heap[1] = node++;
-			s.pqdownheap(tree, 1);
-		} while (s.heap_len >= 2);
-
-		s.heap[--s.heap_max] = s.heap[1];
-
-		// At this point, the fields freq and dad are set. We can now
-		// generate the bit lengths.
-
-		gen_bitlen(s);
-
-		// The field len is now set, we can generate the bit codes
-		gen_codes(tree, that.max_code, s.bl_count);
-	};
-
-}
-
-Tree._length_code = [ 0, 1, 2, 3, 4, 5, 6, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 12, 12, 13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16,
-		16, 16, 16, 16, 17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19, 19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20,
-		20, 20, 20, 20, 20, 20, 20, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22,
-		22, 22, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
-		24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
-		25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
-		26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28 ];
-
-Tree.base_length = [ 0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 0 ];
-
-Tree.base_dist = [ 0, 1, 2, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192, 256, 384, 512, 768, 1024, 1536, 2048, 3072, 4096, 6144, 8192, 12288, 16384,
-		24576 ];
-
-// Mapping from a distance to a distance code. dist is the distance - 1 and
-// must not have side effects. _dist_code[256] and _dist_code[257] are never
-// used.
-Tree.d_code = function(dist) {
-	return ((dist) < 256 ? _dist_code[dist] : _dist_code[256 + ((dist) >>> 7)]);
-};
-
-// extra bits for each length code
-Tree.extra_lbits = [ 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0 ];
-
-// extra bits for each distance code
-Tree.extra_dbits = [ 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 13, 13 ];
-
-// extra bits for each bit length code
-Tree.extra_blbits = [ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 3, 7 ];
-
-Tree.bl_order = [ 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15 ];
-
-// StaticTree
-
-function StaticTree(static_tree, extra_bits, extra_base, elems, max_length) {
-	var that = this;
-	that.static_tree = static_tree;
-	that.extra_bits = extra_bits;
-	that.extra_base = extra_base;
-	that.elems = elems;
-	that.max_length = max_length;
-}
-
-StaticTree.static_ltree = [ 12, 8, 140, 8, 76, 8, 204, 8, 44, 8, 172, 8, 108, 8, 236, 8, 28, 8, 156, 8, 92, 8, 220, 8, 60, 8, 188, 8, 124, 8, 252, 8, 2, 8,
-		130, 8, 66, 8, 194, 8, 34, 8, 162, 8, 98, 8, 226, 8, 18, 8, 146, 8, 82, 8, 210, 8, 50, 8, 178, 8, 114, 8, 242, 8, 10, 8, 138, 8, 74, 8, 202, 8, 42,
-		8, 170, 8, 106, 8, 234, 8, 26, 8, 154, 8, 90, 8, 218, 8, 58, 8, 186, 8, 122, 8, 250, 8, 6, 8, 134, 8, 70, 8, 198, 8, 38, 8, 166, 8, 102, 8, 230, 8,
-		22, 8, 150, 8, 86, 8, 214, 8, 54, 8, 182, 8, 118, 8, 246, 8, 14, 8, 142, 8, 78, 8, 206, 8, 46, 8, 174, 8, 110, 8, 238, 8, 30, 8, 158, 8, 94, 8,
-		222, 8, 62, 8, 190, 8, 126, 8, 254, 8, 1, 8, 129, 8, 65, 8, 193, 8, 33, 8, 161, 8, 97, 8, 225, 8, 17, 8, 145, 8, 81, 8, 209, 8, 49, 8, 177, 8, 113,
-		8, 241, 8, 9, 8, 137, 8, 73, 8, 201, 8, 41, 8, 169, 8, 105, 8, 233, 8, 25, 8, 153, 8, 89, 8, 217, 8, 57, 8, 185, 8, 121, 8, 249, 8, 5, 8, 133, 8,
-		69, 8, 197, 8, 37, 8, 165, 8, 101, 8, 229, 8, 21, 8, 149, 8, 85, 8, 213, 8, 53, 8, 181, 8, 117, 8, 245, 8, 13, 8, 141, 8, 77, 8, 205, 8, 45, 8,
-		173, 8, 109, 8, 237, 8, 29, 8, 157, 8, 93, 8, 221, 8, 61, 8, 189, 8, 125, 8, 253, 8, 19, 9, 275, 9, 147, 9, 403, 9, 83, 9, 339, 9, 211, 9, 467, 9,
-		51, 9, 307, 9, 179, 9, 435, 9, 115, 9, 371, 9, 243, 9, 499, 9, 11, 9, 267, 9, 139, 9, 395, 9, 75, 9, 331, 9, 203, 9, 459, 9, 43, 9, 299, 9, 171, 9,
-		427, 9, 107, 9, 363, 9, 235, 9, 491, 9, 27, 9, 283, 9, 155, 9, 411, 9, 91, 9, 347, 9, 219, 9, 475, 9, 59, 9, 315, 9, 187, 9, 443, 9, 123, 9, 379,
-		9, 251, 9, 507, 9, 7, 9, 263, 9, 135, 9, 391, 9, 71, 9, 327, 9, 199, 9, 455, 9, 39, 9, 295, 9, 167, 9, 423, 9, 103, 9, 359, 9, 231, 9, 487, 9, 23,
-		9, 279, 9, 151, 9, 407, 9, 87, 9, 343, 9, 215, 9, 471, 9, 55, 9, 311, 9, 183, 9, 439, 9, 119, 9, 375, 9, 247, 9, 503, 9, 15, 9, 271, 9, 143, 9,
-		399, 9, 79, 9, 335, 9, 207, 9, 463, 9, 47, 9, 303, 9, 175, 9, 431, 9, 111, 9, 367, 9, 239, 9, 495, 9, 31, 9, 287, 9, 159, 9, 415, 9, 95, 9, 351, 9,
-		223, 9, 479, 9, 63, 9, 319, 9, 191, 9, 447, 9, 127, 9, 383, 9, 255, 9, 511, 9, 0, 7, 64, 7, 32, 7, 96, 7, 16, 7, 80, 7, 48, 7, 112, 7, 8, 7, 72, 7,
-		40, 7, 104, 7, 24, 7, 88, 7, 56, 7, 120, 7, 4, 7, 68, 7, 36, 7, 100, 7, 20, 7, 84, 7, 52, 7, 116, 7, 3, 8, 131, 8, 67, 8, 195, 8, 35, 8, 163, 8,
-		99, 8, 227, 8 ];
-
-StaticTree.static_dtree = [ 0, 5, 16, 5, 8, 5, 24, 5, 4, 5, 20, 5, 12, 5, 28, 5, 2, 5, 18, 5, 10, 5, 26, 5, 6, 5, 22, 5, 14, 5, 30, 5, 1, 5, 17, 5, 9, 5,
-		25, 5, 5, 5, 21, 5, 13, 5, 29, 5, 3, 5, 19, 5, 11, 5, 27, 5, 7, 5, 23, 5 ];
-
-StaticTree.static_l_desc = new StaticTree(StaticTree.static_ltree, Tree.extra_lbits, LITERALS + 1, L_CODES, MAX_BITS);
-
-StaticTree.static_d_desc = new StaticTree(StaticTree.static_dtree, Tree.extra_dbits, 0, D_CODES, MAX_BITS);
-
-StaticTree.static_bl_desc = new StaticTree(null, Tree.extra_blbits, 0, BL_CODES, MAX_BL_BITS);
-
-// Deflate
-
-var MAX_MEM_LEVEL = 9;
-var DEF_MEM_LEVEL = 8;
-
-function Config(good_length, max_lazy, nice_length, max_chain, func) {
-	var that = this;
-	that.good_length = good_length;
-	that.max_lazy = max_lazy;
-	that.nice_length = nice_length;
-	that.max_chain = max_chain;
-	that.func = func;
-}
-
-var STORED = 0;
-var FAST = 1;
-var SLOW = 2;
-var config_table = [ new Config(0, 0, 0, 0, STORED), new Config(4, 4, 8, 4, FAST), new Config(4, 5, 16, 8, FAST), new Config(4, 6, 32, 32, FAST),
-		new Config(4, 4, 16, 16, SLOW), new Config(8, 16, 32, 32, SLOW), new Config(8, 16, 128, 128, SLOW), new Config(8, 32, 128, 256, SLOW),
-		new Config(32, 128, 258, 1024, SLOW), new Config(32, 258, 258, 4096, SLOW) ];
-
-var z_errmsg = [ "need dictionary", // Z_NEED_DICT
-// 2
-"stream end", // Z_STREAM_END 1
-"", // Z_OK 0
-"", // Z_ERRNO (-1)
-"stream error", // Z_STREAM_ERROR (-2)
-"data error", // Z_DATA_ERROR (-3)
-"", // Z_MEM_ERROR (-4)
-"buffer error", // Z_BUF_ERROR (-5)
-"",// Z_VERSION_ERROR (-6)
-"" ];
-
-// block not completed, need more input or more output
-var NeedMore = 0;
-
-// block flush performed
-var BlockDone = 1;
-
-// finish started, need only more output at next deflate
-var FinishStarted = 2;
-
-// finish done, accept no more input or output
-var FinishDone = 3;
-
-// preset dictionary flag in zlib header
-var PRESET_DICT = 0x20;
-
-var INIT_STATE = 42;
-var BUSY_STATE = 113;
-var FINISH_STATE = 666;
-
-// The deflate compression method
-var Z_DEFLATED = 8;
-
-var STORED_BLOCK = 0;
-var STATIC_TREES = 1;
-var DYN_TREES = 2;
-
-var MIN_MATCH = 3;
-var MAX_MATCH = 258;
-var MIN_LOOKAHEAD = (MAX_MATCH + MIN_MATCH + 1);
-
-function smaller(tree, n, m, depth) {
-	var tn2 = tree[n * 2];
-	var tm2 = tree[m * 2];
-	return (tn2 < tm2 || (tn2 == tm2 && depth[n] <= depth[m]));
-}
-
-function Deflate() {
-
-	var that = this;
-	var strm; // pointer back to this zlib stream
-	var status; // as the name implies
-	// pending_buf; // output still pending
-	var pending_buf_size; // size of pending_buf
-	// pending_out; // next pending byte to output to the stream
-	// pending; // nb of bytes in the pending buffer
-	var method; // STORED (for zip only) or DEFLATED
-	var last_flush; // value of flush param for previous deflate call
-
-	var w_size; // LZ77 window size (32K by default)
-	var w_bits; // log2(w_size) (8..16)
-	var w_mask; // w_size - 1
-
-	var window;
-	// Sliding window. Input bytes are read into the second half of the window,
-	// and move to the first half later to keep a dictionary of at least wSize
-	// bytes. With this organization, matches are limited to a distance of
-	// wSize-MAX_MATCH bytes, but this ensures that IO is always
-	// performed with a length multiple of the block size. Also, it limits
-	// the window size to 64K, which is quite useful on MSDOS.
-	// To do: use the user input buffer as sliding window.
-
-	var window_size;
-	// Actual size of window: 2*wSize, except when the user input buffer
-	// is directly used as sliding window.
-
-	var prev;
-	// Link to older string with same hash index. To limit the size of this
-	// array to 64K, this link is maintained only for the last 32K strings.
-	// An index in this array is thus a window index modulo 32K.
-
-	var head; // Heads of the hash chains or NIL.
-
-	var ins_h; // hash index of string to be inserted
-	var hash_size; // number of elements in hash table
-	var hash_bits; // log2(hash_size)
-	var hash_mask; // hash_size-1
-
-	// Number of bits by which ins_h must be shifted at each input
-	// step. It must be such that after MIN_MATCH steps, the oldest
-	// byte no longer takes part in the hash key, that is:
-	// hash_shift * MIN_MATCH >= hash_bits
-	var hash_shift;
-
-	// Window position at the beginning of the current output block. Gets
-	// negative when the window is moved backwards.
-
-	var block_start;
-
-	var match_length; // length of best match
-	var prev_match; // previous match
-	var match_available; // set if previous match exists
-	var strstart; // start of string to insert
-	var match_start; // start of matching string
-	var lookahead; // number of valid bytes ahead in window
-
-	// Length of the best match at previous step. Matches not greater than this
-	// are discarded. This is used in the lazy match evaluation.
-	var prev_length;
-
-	// To speed up deflation, hash chains are never searched beyond this
-	// length. A higher limit improves compression ratio but degrades the speed.
-	var max_chain_length;
-
-	// Attempt to find a better match only when the current match is strictly
-	// smaller than this value. This mechanism is used only for compression
-	// levels >= 4.
-	var max_lazy_match;
-
-	// Insert new strings in the hash table only if the match length is not
-	// greater than this length. This saves time but degrades compression.
-	// max_insert_length is used only for compression levels <= 3.
-
-	var level; // compression level (1..9)
-	var strategy; // favor or force Huffman coding
-
-	// Use a faster search when the previous match is longer than this
-	var good_match;
-
-	// Stop searching when current match exceeds this
-	var nice_match;
-
-	var dyn_ltree; // literal and length tree
-	var dyn_dtree; // distance tree
-	var bl_tree; // Huffman tree for bit lengths
-
-	var l_desc = new Tree(); // desc for literal tree
-	var d_desc = new Tree(); // desc for distance tree
-	var bl_desc = new Tree(); // desc for bit length tree
-
-	// that.heap_len; // number of elements in the heap
-	// that.heap_max; // element of largest frequency
-	// The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
-	// The same heap array is used to build all trees.
-
-	// Depth of each subtree used as tie breaker for trees of equal frequency
-	that.depth = [];
-
-	var l_buf; // index for literals or lengths */
-
-	// Size of match buffer for literals/lengths. There are 4 reasons for
-	// limiting lit_bufsize to 64K:
-	// - frequencies can be kept in 16 bit counters
-	// - if compression is not successful for the first block, all input
-	// data is still in the window so we can still emit a stored block even
-	// when input comes from standard input. (This can also be done for
-	// all blocks if lit_bufsize is not greater than 32K.)
-	// - if compression is not successful for a file smaller than 64K, we can
-	// even emit a stored file instead of a stored block (saving 5 bytes).
-	// This is applicable only for zip (not gzip or zlib).
-	// - creating new Huffman trees less frequently may not provide fast
-	// adaptation to changes in the input data statistics. (Take for
-	// example a binary file with poorly compressible code followed by
-	// a highly compressible string table.) Smaller buffer sizes give
-	// fast adaptation but have of course the overhead of transmitting
-	// trees more frequently.
-	// - I can't count above 4
-	var lit_bufsize;
-
-	var last_lit; // running index in l_buf
-
-	// Buffer for distances. To simplify the code, d_buf and l_buf have
-	// the same number of elements. To use different lengths, an extra flag
-	// array would be necessary.
-
-	var d_buf; // index of pendig_buf
-
-	// that.opt_len; // bit length of current block with optimal trees
-	// that.static_len; // bit length of current block with static trees
-	var matches; // number of string matches in current block
-	var last_eob_len; // bit length of EOB code for last block
-
-	// Output buffer. bits are inserted starting at the bottom (least
-	// significant bits).
-	var bi_buf;
-
-	// Number of valid bits in bi_buf. All bits above the last valid bit
-	// are always zero.
-	var bi_valid;
-
-	// number of codes at each bit length for an optimal tree
-	that.bl_count = [];
-
-	// heap used to build the Huffman trees
-	that.heap = [];
-
-	dyn_ltree = [];
-	dyn_dtree = [];
-	bl_tree = [];
-
-	function lm_init() {
-		var i;
-		window_size = 2 * w_size;
-
-		head[hash_size - 1] = 0;
-		for (i = 0; i < hash_size - 1; i++) {
-			head[i] = 0;
-		}
-
-		// Set the default configuration parameters:
-		max_lazy_match = config_table[level].max_lazy;
-		good_match = config_table[level].good_length;
-		nice_match = config_table[level].nice_length;
-		max_chain_length = config_table[level].max_chain;
-
-		strstart = 0;
-		block_start = 0;
-		lookahead = 0;
-		match_length = prev_length = MIN_MATCH - 1;
-		match_available = 0;
-		ins_h = 0;
-	}
-
-	function init_block() {
-		var i;
-		// Initialize the trees.
-		for (i = 0; i < L_CODES; i++)
-			dyn_ltree[i * 2] = 0;
-		for (i = 0; i < D_CODES; i++)
-			dyn_dtree[i * 2] = 0;
-		for (i = 0; i < BL_CODES; i++)
-			bl_tree[i * 2] = 0;
-
-		dyn_ltree[END_BLOCK * 2] = 1;
-		that.opt_len = that.static_len = 0;
-		last_lit = matches = 0;
-	}
-
-	// Initialize the tree data structures for a new zlib stream.
-	function tr_init() {
-
-		l_desc.dyn_tree = dyn_ltree;
-		l_desc.stat_desc = StaticTree.static_l_desc;
-
-		d_desc.dyn_tree = dyn_dtree;
-		d_desc.stat_desc = StaticTree.static_d_desc;
-
-		bl_desc.dyn_tree = bl_tree;
-		bl_desc.stat_desc = StaticTree.static_bl_desc;
-
-		bi_buf = 0;
-		bi_valid = 0;
-		last_eob_len = 8; // enough lookahead for inflate
-
-		// Initialize the first block of the first file:
-		init_block();
-	}
-
-	// Restore the heap property by moving down the tree starting at node k,
-	// exchanging a node with the smallest of its two sons if necessary,
-	// stopping
-	// when the heap property is re-established (each father smaller than its
-	// two sons).
-	that.pqdownheap = function(tree, // the tree to restore
-	k // node to move down
-	) {
-		var heap = that.heap;
-		var v = heap[k];
-		var j = k << 1; // left son of k
-		while (j <= that.heap_len) {
-			// Set j to the smallest of the two sons:
-			if (j < that.heap_len && smaller(tree, heap[j + 1], heap[j], that.depth)) {
-				j++;
-			}
-			// Exit if v is smaller than both sons
-			if (smaller(tree, v, heap[j], that.depth))
-				break;
-
-			// Exchange v with the smallest son
-			heap[k] = heap[j];
-			k = j;
-			// And continue down the tree, setting j to the left son of k
-			j <<= 1;
-		}
-		heap[k] = v;
-	};
-
-	// Scan a literal or distance tree to determine the frequencies of the codes
-	// in the bit length tree.
-	function scan_tree(tree,// the tree to be scanned
-	max_code // and its largest code of non zero frequency
-	) {
-		var n; // iterates over all tree elements
-		var prevlen = -1; // last emitted length
-		var curlen; // length of current code
-		var nextlen = tree[0 * 2 + 1]; // length of next code
-		var count = 0; // repeat count of the current code
-		var max_count = 7; // max repeat count
-		var min_count = 4; // min repeat count
-
-		if (nextlen === 0) {
-			max_count = 138;
-			min_count = 3;
-		}
-		tree[(max_code + 1) * 2 + 1] = 0xffff; // guard
-
-		for (n = 0; n <= max_code; n++) {
-			curlen = nextlen;
-			nextlen = tree[(n + 1) * 2 + 1];
-			if (++count < max_count && curlen == nextlen) {
-				continue;
-			} else if (count < min_count) {
-				bl_tree[curlen * 2] += count;
-			} else if (curlen !== 0) {
-				if (curlen != prevlen)
-					bl_tree[curlen * 2]++;
-				bl_tree[REP_3_6 * 2]++;
-			} else if (count <= 10) {
-				bl_tree[REPZ_3_10 * 2]++;
-			} else {
-				bl_tree[REPZ_11_138 * 2]++;
-			}
-			count = 0;
-			prevlen = curlen;
-			if (nextlen === 0) {
-				max_count = 138;
-				min_count = 3;
-			} else if (curlen == nextlen) {
-				max_count = 6;
-				min_count = 3;
-			} else {
-				max_count = 7;
-				min_count = 4;
-			}
-		}
-	}
-
-	// Construct the Huffman tree for the bit lengths and return the index in
-	// bl_order of the last bit length code to send.
-	function build_bl_tree() {
-		var max_blindex; // index of last bit length code of non zero freq
-
-		// Determine the bit length frequencies for literal and distance trees
-		scan_tree(dyn_ltree, l_desc.max_code);
-		scan_tree(dyn_dtree, d_desc.max_code);
-
-		// Build the bit length tree:
-		bl_desc.build_tree(that);
-		// opt_len now includes the length of the tree representations, except
-		// the lengths of the bit lengths codes and the 5+5+4 bits for the
-		// counts.
-
-		// Determine the number of bit length codes to send. The pkzip format
-		// requires that at least 4 bit length codes be sent. (appnote.txt says
-		// 3 but the actual value used is 4.)
-		for (max_blindex = BL_CODES - 1; max_blindex >= 3; max_blindex--) {
-			if (bl_tree[Tree.bl_order[max_blindex] * 2 + 1] !== 0)
-				break;
-		}
-		// Update opt_len to include the bit length tree and counts
-		that.opt_len += 3 * (max_blindex + 1) + 5 + 5 + 4;
-
-		return max_blindex;
-	}
-
-	// Output a byte on the stream.
-	// IN assertion: there is enough room in pending_buf.
-	function put_byte(p) {
-		that.pending_buf[that.pending++] = p;
-	}
-
-	function put_short(w) {
-		put_byte(w & 0xff);
-		put_byte((w >>> 8) & 0xff);
-	}
-
-	function putShortMSB(b) {
-		put_byte((b >> 8) & 0xff);
-		put_byte((b & 0xff) & 0xff);
-	}
-
-	function send_bits(value, length) {
-		var val, len = length;
-		if (bi_valid > Buf_size - len) {
-			val = value;
-			// bi_buf |= (val << bi_valid);
-			bi_buf |= ((val << bi_valid) & 0xffff);
-			put_short(bi_buf);
-			bi_buf = val >>> (Buf_size - bi_valid);
-			bi_valid += len - Buf_size;
-		} else {
-			// bi_buf |= (value) << bi_valid;
-			bi_buf |= (((value) << bi_valid) & 0xffff);
-			bi_valid += len;
-		}
-	}
-
-	function send_code(c, tree) {
-		var c2 = c * 2;
-		send_bits(tree[c2] & 0xffff, tree[c2 + 1] & 0xffff);
-	}
-
-	// Send a literal or distance tree in compressed form, using the codes in
-	// bl_tree.
-	function send_tree(tree,// the tree to be sent
-	max_code // and its largest code of non zero frequency
-	) {
-		var n; // iterates over all tree elements
-		var prevlen = -1; // last emitted length
-		var curlen; // length of current code
-		var nextlen = tree[0 * 2 + 1]; // length of next code
-		var count = 0; // repeat count of the current code
-		var max_count = 7; // max repeat count
-		var min_count = 4; // min repeat count
-
-		if (nextlen === 0) {
-			max_count = 138;
-			min_count = 3;
-		}
-
-		for (n = 0; n <= max_code; n++) {
-			curlen = nextlen;
-			nextlen = tree[(n + 1) * 2 + 1];
-			if (++count < max_count && curlen == nextlen) {
-				continue;
-			} else if (count < min_count) {
-				do {
-					send_code(curlen, bl_tree);
-				} while (--count !== 0);
-			} else if (curlen !== 0) {
-				if (curlen != prevlen) {
-					send_code(curlen, bl_tree);
-					count--;
-				}
-				send_code(REP_3_6, bl_tree);
-				send_bits(count - 3, 2);
-			} else if (count <= 10) {
-				send_code(REPZ_3_10, bl_tree);
-				send_bits(count - 3, 3);
-			} else {
-				send_code(REPZ_11_138, bl_tree);
-				send_bits(count - 11, 7);
-			}
-			count = 0;
-			prevlen = curlen;
-			if (nextlen === 0) {
-				max_count = 138;
-				min_count = 3;
-			} else if (curlen == nextlen) {
-				max_count = 6;
-				min_count = 3;
-			} else {
-				max_count = 7;
-				min_count = 4;
-			}
-		}
-	}
-
-	// Send the header for a block using dynamic Huffman trees: the counts, the
-	// lengths of the bit length codes, the literal tree and the distance tree.
-	// IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
-	function send_all_trees(lcodes, dcodes, blcodes) {
-		var rank; // index in bl_order
-
-		send_bits(lcodes - 257, 5); // not +255 as stated in appnote.txt
-		send_bits(dcodes - 1, 5);
-		send_bits(blcodes - 4, 4); // not -3 as stated in appnote.txt
-		for (rank = 0; rank < blcodes; rank++) {
-			send_bits(bl_tree[Tree.bl_order[rank] * 2 + 1], 3);
-		}
-		send_tree(dyn_ltree, lcodes - 1); // literal tree
-		send_tree(dyn_dtree, dcodes - 1); // distance tree
-	}
-
-	// Flush the bit buffer, keeping at most 7 bits in it.
-	function bi_flush() {
-		if (bi_valid == 16) {
-			put_short(bi_buf);
-			bi_buf = 0;
-			bi_valid = 0;
-		} else if (bi_valid >= 8) {
-			put_byte(bi_buf & 0xff);
-			bi_buf >>>= 8;
-			bi_valid -= 8;
-		}
-	}
-
-	// Send one empty static block to give enough lookahead for inflate.
-	// This takes 10 bits, of which 7 may remain in the bit buffer.
-	// The current inflate code requires 9 bits of lookahead. If the
-	// last two codes for the previous block (real code plus EOB) were coded
-	// on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode
-	// the last real code. In this case we send two empty static blocks instead
-	// of one. (There are no problems if the previous block is stored or fixed.)
-	// To simplify the code, we assume the worst case of last real code encoded
-	// on one bit only.
-	function _tr_align() {
-		send_bits(STATIC_TREES << 1, 3);
-		send_code(END_BLOCK, StaticTree.static_ltree);
-
-		bi_flush();
-
-		// Of the 10 bits for the empty block, we have already sent
-		// (10 - bi_valid) bits. The lookahead for the last real code (before
-		// the EOB of the previous block) was thus at least one plus the length
-		// of the EOB plus what we have just sent of the empty static block.
-		if (1 + last_eob_len + 10 - bi_valid < 9) {
-			send_bits(STATIC_TREES << 1, 3);
-			send_code(END_BLOCK, StaticTree.static_ltree);
-			bi_flush();
-		}
-		last_eob_len = 7;
-	}
-
-	// Save the match info and tally the frequency counts. Return true if
-	// the current block must be flushed.
-	function _tr_tally(dist, // distance of matched string
-	lc // match length-MIN_MATCH or unmatched char (if dist==0)
-	) {
-		var out_length, in_length, dcode;
-		that.pending_buf[d_buf + last_lit * 2] = (dist >>> 8) & 0xff;
-		that.pending_buf[d_buf + last_lit * 2 + 1] = dist & 0xff;
-
-		that.pending_buf[l_buf + last_lit] = lc & 0xff;
-		last_lit++;
-
-		if (dist === 0) {
-			// lc is the unmatched char
-			dyn_ltree[lc * 2]++;
-		} else {
-			matches++;
-			// Here, lc is the match length - MIN_MATCH
-			dist--; // dist = match distance - 1
-			dyn_ltree[(Tree._length_code[lc] + LITERALS + 1) * 2]++;
-			dyn_dtree[Tree.d_code(dist) * 2]++;
-		}
-
-		if ((last_lit & 0x1fff) === 0 && level > 2) {
-			// Compute an upper bound for the compressed length
-			out_length = last_lit * 8;
-			in_length = strstart - block_start;
-			for (dcode = 0; dcode < D_CODES; dcode++) {
-				out_length += dyn_dtree[dcode * 2] * (5 + Tree.extra_dbits[dcode]);
-			}
-			out_length >>>= 3;
-			if ((matches < Math.floor(last_lit / 2)) && out_length < Math.floor(in_length / 2))
-				return true;
-		}
-
-		return (last_lit == lit_bufsize - 1);
-		// We avoid equality with lit_bufsize because of wraparound at 64K
-		// on 16 bit machines and because stored blocks are restricted to
-		// 64K-1 bytes.
-	}
-
-	// Send the block data compressed using the given Huffman trees
-	function compress_block(ltree, dtree) {
-		var dist; // distance of matched string
-		var lc; // match length or unmatched char (if dist === 0)
-		var lx = 0; // running index in l_buf
-		var code; // the code to send
-		var extra; // number of extra bits to send
-
-		if (last_lit !== 0) {
-			do {
-				dist = ((that.pending_buf[d_buf + lx * 2] << 8) & 0xff00) | (that.pending_buf[d_buf + lx * 2 + 1] & 0xff);
-				lc = (that.pending_buf[l_buf + lx]) & 0xff;
-				lx++;
-
-				if (dist === 0) {
-					send_code(lc, ltree); // send a literal byte
-				} else {
-					// Here, lc is the match length - MIN_MATCH
-					code = Tree._length_code[lc];
-
-					send_code(code + LITERALS + 1, ltree); // send the length
-					// code
-					extra = Tree.extra_lbits[code];
-					if (extra !== 0) {
-						lc -= Tree.base_length[code];
-						send_bits(lc, extra); // send the extra length bits
-					}
-					dist--; // dist is now the match distance - 1
-					code = Tree.d_code(dist);
-
-					send_code(code, dtree); // send the distance code
-					extra = Tree.extra_dbits[code];
-					if (extra !== 0) {
-						dist -= Tree.base_dist[code];
-						send_bits(dist, extra); // send the extra distance bits
-					}
-				} // literal or match pair ?
-
-				// Check that the overlay between pending_buf and d_buf+l_buf is
-				// ok:
-			} while (lx < last_lit);
-		}
-
-		send_code(END_BLOCK, ltree);
-		last_eob_len = ltree[END_BLOCK * 2 + 1];
-	}
-
-	// Flush the bit buffer and align the output on a byte boundary
-	function bi_windup() {
-		if (bi_valid > 8) {
-			put_short(bi_buf);
-		} else if (bi_valid > 0) {
-			put_byte(bi_buf & 0xff);
-		}
-		bi_buf = 0;
-		bi_valid = 0;
-	}
-
-	// Copy a stored block, storing first the length and its
-	// one's complement if requested.
-	function copy_block(buf, // the input data
-	len, // its length
-	header // true if block header must be written
-	) {
-		bi_windup(); // align on byte boundary
-		last_eob_len = 8; // enough lookahead for inflate
-
-		if (header) {
-			put_short(len);
-			put_short(~len);
-		}
-
-    var USE_AB = !Array.isArray(that.pending_buf);
-    if (USE_AB) {
-		  that.pending_buf.set(window.subarray(buf, buf + len), that.pending);
-		} else {
-		  arraySet(that.pending_buf, window, buf, len, that.pending);
-		}
-		that.pending += len;
-	}
-
-	// Send a stored block
-	function _tr_stored_block(buf, // input block
-	stored_len, // length of input block
-	eof // true if this is the last block for a file
-	) {
-		send_bits((STORED_BLOCK << 1) + (eof ? 1 : 0), 3); // send block type
-		copy_block(buf, stored_len, true); // with header
-	}
-
-	// Determine the best encoding for the current block: dynamic trees, static
-	// trees or store, and output the encoded block to the zip file.
-	function _tr_flush_block(buf, // input block, or NULL if too old
-	stored_len, // length of input block
-	eof // true if this is the last block for a file
-	) {
-		var opt_lenb, static_lenb;// opt_len and static_len in bytes
-		var max_blindex = 0; // index of last bit length code of non zero freq
-
-		// Build the Huffman trees unless a stored block is forced
-		if (level > 0) {
-			// Construct the literal and distance trees
-			l_desc.build_tree(that);
-
-			d_desc.build_tree(that);
-
-			// At this point, opt_len and static_len are the total bit lengths
-			// of
-			// the compressed block data, excluding the tree representations.
-
-			// Build the bit length tree for the above two trees, and get the
-			// index
-			// in bl_order of the last bit length code to send.
-			max_blindex = build_bl_tree();
-
-			// Determine the best encoding. Compute first the block length in
-			// bytes
-			opt_lenb = (that.opt_len + 3 + 7) >>> 3;
-			static_lenb = (that.static_len + 3 + 7) >>> 3;
-
-			if (static_lenb <= opt_lenb)
-				opt_lenb = static_lenb;
-		} else {
-			opt_lenb = static_lenb = stored_len + 5; // force a stored block
-		}
-
-		if ((stored_len + 4 <= opt_lenb) && buf != -1) {
-			// 4: two words for the lengths
-			// The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
-			// Otherwise we can't have processed more than WSIZE input bytes
-			// since
-			// the last block flush, because compression would have been
-			// successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
-			// transform a block into a stored block.
-			_tr_stored_block(buf, stored_len, eof);
-		} else if (static_lenb == opt_lenb) {
-			send_bits((STATIC_TREES << 1) + (eof ? 1 : 0), 3);
-			compress_block(StaticTree.static_ltree, StaticTree.static_dtree);
-		} else {
-			send_bits((DYN_TREES << 1) + (eof ? 1 : 0), 3);
-			send_all_trees(l_desc.max_code + 1, d_desc.max_code + 1, max_blindex + 1);
-			compress_block(dyn_ltree, dyn_dtree);
-		}
-
-		// The above check is made mod 2^32, for files larger than 512 MB
-		// and uLong implemented on 32 bits.
-
-		init_block();
-
-		if (eof) {
-			bi_windup();
-		}
-	}
-
-	function flush_block_only(eof) {
-		_tr_flush_block(block_start >= 0 ? block_start : -1, strstart - block_start, eof);
-		block_start = strstart;
-		strm.flush_pending();
-	}
-
-	// Fill the window when the lookahead becomes insufficient.
-	// Updates strstart and lookahead.
-	//
-	// IN assertion: lookahead < MIN_LOOKAHEAD
-	// OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
-	// At least one byte has been read, or avail_in === 0; reads are
-	// performed for at least two bytes (required for the zip translate_eol
-	// option -- not supported here).
-	function fill_window() {
-		var n, m;
-		var p;
-		var more; // Amount of free space at the end of the window.
-
-		do {
-			more = (window_size - lookahead - strstart);
-
-			// Deal with !@#$% 64K limit:
-			if (more === 0 && strstart === 0 && lookahead === 0) {
-				more = w_size;
-			} else if (more == -1) {
-				// Very unlikely, but possible on 16 bit machine if strstart ==
-				// 0
-				// and lookahead == 1 (input done one byte at time)
-				more--;
-
-				// If the window is almost full and there is insufficient
-				// lookahead,
-				// move the upper half to the lower one to make room in the
-				// upper half.
-			} else if (strstart >= w_size + w_size - MIN_LOOKAHEAD) {
-			  var USE_AB = !Array.isArray(window);
-			  if (USE_AB) {
-  				window.set(window.subarray(w_size, w_size + w_size), 0);
-  			} else {
-  			  arraySet(window, window, w_size, w_size, 0);
-  			}
-
-				match_start -= w_size;
-				strstart -= w_size; // we now have strstart >= MAX_DIST
-				block_start -= w_size;
-
-				// Slide the hash table (could be avoided with 32 bit values
-				// at the expense of memory usage). We slide even when level ==
-				// 0
-				// to keep the hash table consistent if we switch back to level
-				// > 0
-				// later. (Using level 0 permanently is not an optimal usage of
-				// zlib, so we don't care about this pathological case.)
-
-				n = hash_size;
-				p = n;
-				do {
-					m = (head[--p] & 0xffff);
-					head[p] = (m >= w_size ? m - w_size : 0);
-				} while (--n !== 0);
-
-				n = w_size;
-				p = n;
-				do {
-					m = (prev[--p] & 0xffff);
-					prev[p] = (m >= w_size ? m - w_size : 0);
-					// If n is not on any hash chain, prev[n] is garbage but
-					// its value will never be used.
-				} while (--n !== 0);
-				more += w_size;
-			}
-
-			if (strm.avail_in === 0)
-				return;
-
-			// If there was no sliding:
-			// strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
-			// more == window_size - lookahead - strstart
-			// => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
-			// => more >= window_size - 2*WSIZE + 2
-			// In the BIG_MEM or MMAP case (not yet supported),
-			// window_size == input_size + MIN_LOOKAHEAD &&
-			// strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
-			// Otherwise, window_size == 2*WSIZE so more >= 2.
-			// If there was sliding, more >= WSIZE. So in all cases, more >= 2.
-
-			n = strm.read_buf(window, strstart + lookahead, more);
-			lookahead += n;
-
-			// Initialize the hash value now that we have some input:
-			if (lookahead >= MIN_MATCH) {
-				ins_h = window[strstart] & 0xff;
-				ins_h = (((ins_h) << hash_shift) ^ (window[strstart + 1] & 0xff)) & hash_mask;
-			}
-			// If the whole input has less than MIN_MATCH bytes, ins_h is
-			// garbage,
-			// but this is not important since only literal bytes will be
-			// emitted.
-		} while (lookahead < MIN_LOOKAHEAD && strm.avail_in !== 0);
-	}
-
-	// Copy without compression as much as possible from the input stream,
-	// return
-	// the current block state.
-	// This function does not insert new strings in the dictionary since
-	// uncompressible data is probably not useful. This function is used
-	// only for the level=0 compression option.
-	// NOTE: this function should be optimized to avoid extra copying from
-	// window to pending_buf.
-	function deflate_stored(flush) {
-		// Stored blocks are limited to 0xffff bytes, pending_buf is limited
-		// to pending_buf_size, and each stored block has a 5 byte header:
-
-		var max_block_size = 0xffff;
-		var max_start;
-
-		if (max_block_size > pending_buf_size - 5) {
-			max_block_size = pending_buf_size - 5;
-		}
-
-		// Copy as much as possible from input to output:
-		while (true) {
-			// Fill the window as much as possible:
-			if (lookahead <= 1) {
-				fill_window();
-				if (lookahead === 0 && flush == Z_NO_FLUSH)
-					return NeedMore;
-				if (lookahead === 0)
-					break; // flush the current block
-			}
-
-			strstart += lookahead;
-			lookahead = 0;
-
-			// Emit a stored block if pending_buf will be full:
-			max_start = block_start + max_block_size;
-			if (strstart === 0 || strstart >= max_start) {
-				// strstart === 0 is possible when wraparound on 16-bit machine
-				lookahead = (strstart - max_start);
-				strstart = max_start;
-
-				flush_block_only(false);
-				if (strm.avail_out === 0)
-					return NeedMore;
-
-			}
-
-			// Flush if we may have to slide, otherwise block_start may become
-			// negative and the data will be gone:
-			if (strstart - block_start >= w_size - MIN_LOOKAHEAD) {
-				flush_block_only(false);
-				if (strm.avail_out === 0)
-					return NeedMore;
-			}
-		}
-
-		flush_block_only(flush == Z_FINISH);
-		if (strm.avail_out === 0)
-			return (flush == Z_FINISH) ? FinishStarted : NeedMore;
-
-		return flush == Z_FINISH ? FinishDone : BlockDone;
-	}
-
-	function longest_match(cur_match) {
-		var chain_length = max_chain_length; // max hash chain length
-		var scan = strstart; // current string
-		var match; // matched string
-		var len; // length of current match
-		var best_len = prev_length; // best match length so far
-		var limit = strstart > (w_size - MIN_LOOKAHEAD) ? strstart - (w_size - MIN_LOOKAHEAD) : 0;
-		var _nice_match = nice_match;
-
-		// Stop when cur_match becomes <= limit. To simplify the code,
-		// we prevent matches with the string of window index 0.
-
-		var wmask = w_mask;
-
-		var strend = strstart + MAX_MATCH;
-		var scan_end1 = window[scan + best_len - 1];
-		var scan_end = window[scan + best_len];
-
-		// The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of
-		// 16.
-		// It is easy to get rid of this optimization if necessary.
-
-		// Do not waste too much time if we already have a good match:
-		if (prev_length >= good_match) {
-			chain_length >>= 2;
-		}
-
-		// Do not look for matches beyond the end of the input. This is
-		// necessary
-		// to make deflate deterministic.
-		if (_nice_match > lookahead)
-			_nice_match = lookahead;
-
-		do {
-			match = cur_match;
-
-			// Skip to next match if the match length cannot increase
-			// or if the match length is less than 2:
-			if (window[match + best_len] != scan_end || window[match + best_len - 1] != scan_end1 || window[match] != window[scan]
-					|| window[++match] != window[scan + 1])
-				continue;
-
-			// The check at best_len-1 can be removed because it will be made
-			// again later. (This heuristic is not always a win.)
-			// It is not necessary to compare scan[2] and match[2] since they
-			// are always equal when the other bytes match, given that
-			// the hash keys are equal and that HASH_BITS >= 8.
-			scan += 2;
-			match++;
-
-			// We check for insufficient lookahead only every 8th comparison;
-			// the 256th check will be made at strstart+258.
-			do {
-			} while (window[++scan] == window[++match] && window[++scan] == window[++match] && window[++scan] == window[++match]
-					&& window[++scan] == window[++match] && window[++scan] == window[++match] && window[++scan] == window[++match]
-					&& window[++scan] == window[++match] && window[++scan] == window[++match] && scan < strend);
-
-			len = MAX_MATCH - (strend - scan);
-			scan = strend - MAX_MATCH;
-
-			if (len > best_len) {
-				match_start = cur_match;
-				best_len = len;
-				if (len >= _nice_match)
-					break;
-				scan_end1 = window[scan + best_len - 1];
-				scan_end = window[scan + best_len];
-			}
-
-		} while ((cur_match = (prev[cur_match & wmask] & 0xffff)) > limit && --chain_length !== 0);
-
-		if (best_len <= lookahead)
-			return best_len;
-		return lookahead;
-	}
-
-	// Compress as much as possible from the input stream, return the current
-	// block state.
-	// This function does not perform lazy evaluation of matches and inserts
-	// new strings in the dictionary only for unmatched strings or for short
-	// matches. It is used only for the fast compression options.
-	function deflate_fast(flush) {
-		// short hash_head = 0; // head of the hash chain
-		var hash_head = 0; // head of the hash chain
-		var bflush; // set if current block must be flushed
-
-		while (true) {
-			// Make sure that we always have enough lookahead, except
-			// at the end of the input file. We need MAX_MATCH bytes
-			// for the next match, plus MIN_MATCH bytes to insert the
-			// string following the next match.
-			if (lookahead < MIN_LOOKAHEAD) {
-				fill_window();
-				if (lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
-					return NeedMore;
-				}
-				if (lookahead === 0)
-					break; // flush the current block
-			}
-
-			// Insert the string window[strstart .. strstart+2] in the
-			// dictionary, and set hash_head to the head of the hash chain:
-			if (lookahead >= MIN_MATCH) {
-				ins_h = (((ins_h) << hash_shift) ^ (window[(strstart) + (MIN_MATCH - 1)] & 0xff)) & hash_mask;
-
-				// prev[strstart&w_mask]=hash_head=head[ins_h];
-				hash_head = (head[ins_h] & 0xffff);
-				prev[strstart & w_mask] = head[ins_h];
-				head[ins_h] = strstart;
-			}
-
-			// Find the longest match, discarding those <= prev_length.
-			// At this point we have always match_length < MIN_MATCH
-
-			if (hash_head !== 0 && ((strstart - hash_head) & 0xffff) <= w_size - MIN_LOOKAHEAD) {
-				// To simplify the code, we prevent matches with the string
-				// of window index 0 (in particular we have to avoid a match
-				// of the string with itself at the start of the input file).
-				if (strategy != Z_HUFFMAN_ONLY) {
-					match_length = longest_match(hash_head);
-				}
-				// longest_match() sets match_start
-			}
-			if (match_length >= MIN_MATCH) {
-				// check_match(strstart, match_start, match_length);
-
-				bflush = _tr_tally(strstart - match_start, match_length - MIN_MATCH);
-
-				lookahead -= match_length;
-
-				// Insert new strings in the hash table only if the match length
-				// is not too large. This saves time but degrades compression.
-				if (match_length <= max_lazy_match && lookahead >= MIN_MATCH) {
-					match_length--; // string at strstart already in hash table
-					do {
-						strstart++;
-
-						ins_h = ((ins_h << hash_shift) ^ (window[(strstart) + (MIN_MATCH - 1)] & 0xff)) & hash_mask;
-						// prev[strstart&w_mask]=hash_head=head[ins_h];
-						hash_head = (head[ins_h] & 0xffff);
-						prev[strstart & w_mask] = head[ins_h];
-						head[ins_h] = strstart;
-
-						// strstart never exceeds WSIZE-MAX_MATCH, so there are
-						// always MIN_MATCH bytes ahead.
-					} while (--match_length !== 0);
-					strstart++;
-				} else {
-					strstart += match_length;
-					match_length = 0;
-					ins_h = window[strstart] & 0xff;
-
-					ins_h = (((ins_h) << hash_shift) ^ (window[strstart + 1] & 0xff)) & hash_mask;
-					// If lookahead < MIN_MATCH, ins_h is garbage, but it does
-					// not
-					// matter since it will be recomputed at next deflate call.
-				}
-			} else {
-				// No match, output a literal byte
-
-				bflush = _tr_tally(0, window[strstart] & 0xff);
-				lookahead--;
-				strstart++;
-			}
-			if (bflush) {
-
-				flush_block_only(false);
-				if (strm.avail_out === 0)
-					return NeedMore;
-			}
-		}
-
-		flush_block_only(flush == Z_FINISH);
-		if (strm.avail_out === 0) {
-			if (flush == Z_FINISH)
-				return FinishStarted;
-			else
-				return NeedMore;
-		}
-		return flush == Z_FINISH ? FinishDone : BlockDone;
-	}
-
-	// Same as above, but achieves better compression. We use a lazy
-	// evaluation for matches: a match is finally adopted only if there is
-	// no better match at the next window position.
-	function deflate_slow(flush) {
-		// short hash_head = 0; // head of hash chain
-		var hash_head = 0; // head of hash chain
-		var bflush; // set if current block must be flushed
-		var max_insert;
-
-		// Process the input block.
-		while (true) {
-			// Make sure that we always have enough lookahead, except
-			// at the end of the input file. We need MAX_MATCH bytes
-			// for the next match, plus MIN_MATCH bytes to insert the
-			// string following the next match.
-
-			if (lookahead < MIN_LOOKAHEAD) {
-				fill_window();
-				if (lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
-					return NeedMore;
-				}
-				if (lookahead === 0)
-					break; // flush the current block
-			}
-
-			// Insert the string window[strstart .. strstart+2] in the
-			// dictionary, and set hash_head to the head of the hash chain:
-
-			if (lookahead >= MIN_MATCH) {
-				ins_h = (((ins_h) << hash_shift) ^ (window[(strstart) + (MIN_MATCH - 1)] & 0xff)) & hash_mask;
-				// prev[strstart&w_mask]=hash_head=head[ins_h];
-				hash_head = (head[ins_h] & 0xffff);
-				prev[strstart & w_mask] = head[ins_h];
-				head[ins_h] = strstart;
-			}
-
-			// Find the longest match, discarding those <= prev_length.
-			prev_length = match_length;
-			prev_match = match_start;
-			match_length = MIN_MATCH - 1;
-
-			if (hash_head !== 0 && prev_length < max_lazy_match && ((strstart - hash_head) & 0xffff) <= w_size - MIN_LOOKAHEAD) {
-				// To simplify the code, we prevent matches with the string
-				// of window index 0 (in particular we have to avoid a match
-				// of the string with itself at the start of the input file).
-
-				if (strategy != Z_HUFFMAN_ONLY) {
-					match_length = longest_match(hash_head);
-				}
-				// longest_match() sets match_start
-
-				if (match_length <= 5 && (strategy == Z_FILTERED || (match_length == MIN_MATCH && strstart - match_start > 4096))) {
-
-					// If prev_match is also MIN_MATCH, match_start is garbage
-					// but we will ignore the current match anyway.
-					match_length = MIN_MATCH - 1;
-				}
-			}
-
-			// If there was a match at the previous step and the current
-			// match is not better, output the previous match:
-			if (prev_length >= MIN_MATCH && match_length <= prev_length) {
-				max_insert = strstart + lookahead - MIN_MATCH;
-				// Do not insert strings in hash table beyond this.
-
-				// check_match(strstart-1, prev_match, prev_length);
-
-				bflush = _tr_tally(strstart - 1 - prev_match, prev_length - MIN_MATCH);
-
-				// Insert in hash table all strings up to the end of the match.
-				// strstart-1 and strstart are already inserted. If there is not
-				// enough lookahead, the last two strings are not inserted in
-				// the hash table.
-				lookahead -= prev_length - 1;
-				prev_length -= 2;
-				do {
-					if (++strstart <= max_insert) {
-						ins_h = (((ins_h) << hash_shift) ^ (window[(strstart) + (MIN_MATCH - 1)] & 0xff)) & hash_mask;
-						// prev[strstart&w_mask]=hash_head=head[ins_h];
-						hash_head = (head[ins_h] & 0xffff);
-						prev[strstart & w_mask] = head[ins_h];
-						head[ins_h] = strstart;
-					}
-				} while (--prev_length !== 0);
-				match_available = 0;
-				match_length = MIN_MATCH - 1;
-				strstart++;
-
-				if (bflush) {
-					flush_block_only(false);
-					if (strm.avail_out === 0)
-						return NeedMore;
-				}
-			} else if (match_available !== 0) {
-
-				// If there was no match at the previous position, output a
-				// single literal. If there was a match but the current match
-				// is longer, truncate the previous match to a single literal.
-
-				bflush = _tr_tally(0, window[strstart - 1] & 0xff);
-
-				if (bflush) {
-					flush_block_only(false);
-				}
-				strstart++;
-				lookahead--;
-				if (strm.avail_out === 0)
-					return NeedMore;
-			} else {
-				// There is no previous match to compare with, wait for
-				// the next step to decide.
-
-				match_available = 1;
-				strstart++;
-				lookahead--;
-			}
-		}
-
-		if (match_available !== 0) {
-			bflush = _tr_tally(0, window[strstart - 1] & 0xff);
-			match_available = 0;
-		}
-		flush_block_only(flush == Z_FINISH);
-
-		if (strm.avail_out === 0) {
-			if (flush == Z_FINISH)
-				return FinishStarted;
-			else
-				return NeedMore;
-		}
-
-		return flush == Z_FINISH ? FinishDone : BlockDone;
-	}
-
-	function deflateReset(strm) {
-		strm.total_in = strm.total_out = 0;
-		strm.msg = null; //
-		
-		that.pending = 0;
-		that.pending_out = 0;
-
-		status = BUSY_STATE;
-
-		last_flush = Z_NO_FLUSH;
-
-		tr_init();
-		lm_init();
-		return Z_OK;
-	}
-
-	that.deflateInit = function(strm, _level, bits, _method, memLevel, _strategy) {
-		if (!_method)
-			_method = Z_DEFLATED;
-		if (!memLevel)
-			memLevel = DEF_MEM_LEVEL;
-		if (!_strategy)
-			_strategy = Z_DEFAULT_STRATEGY;
-
-		// byte[] my_version=ZLIB_VERSION;
-
-		//
-		// if (!version || version[0] != my_version[0]
-		// || stream_size != sizeof(z_stream)) {
-		// return Z_VERSION_ERROR;
-		// }
-
-		strm.msg = null;
-
-		if (_level == Z_DEFAULT_COMPRESSION)
-			_level = 6;
-
-		if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || _method != Z_DEFLATED || bits < 9 || bits > 15 || _level < 0 || _level > 9 || _strategy < 0
-				|| _strategy > Z_HUFFMAN_ONLY) {
-			return Z_STREAM_ERROR;
-		}
-
-		strm.dstate = that;
-
-		w_bits = bits;
-		w_size = 1 << w_bits;
-		w_mask = w_size - 1;
-
-		hash_bits = memLevel + 7;
-		hash_size = 1 << hash_bits;
-		hash_mask = hash_size - 1;
-		hash_shift = Math.floor((hash_bits + MIN_MATCH - 1) / MIN_MATCH);
-
-		window = CAN_AB ? new Uint8Array(w_size * 2) : new Array(w_size * 2);
-		prev = [];
-		head = [];
-
-		lit_bufsize = 1 << (memLevel + 6); // 16K elements by default
-
-		// We overlay pending_buf and d_buf+l_buf. This works since the average
-		// output size for (length,distance) codes is <= 24 bits.
-		that.pending_buf = CAN_AB ? new Uint8Array(lit_bufsize * 4) : new Array(lit_bufsize * 4);
-		pending_buf_size = lit_bufsize * 4;
-
-		d_buf = Math.floor(lit_bufsize / 2);
-		l_buf = (1 + 2) * lit_bufsize;
-
-		level = _level;
-
-		strategy = _strategy;
-		method = _method & 0xff;
-
-		return deflateReset(strm);
-	};
-
-	that.deflateEnd = function() {
-		if (status != INIT_STATE && status != BUSY_STATE && status != FINISH_STATE) {
-			return Z_STREAM_ERROR;
-		}
-		// Deallocate in reverse order of allocations:
-		that.pending_buf = null;
-		head = null;
-		prev = null;
-		window = null;
-		// free
-		that.dstate = null;
-		return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
-	};
-
-	that.deflateParams = function(strm, _level, _strategy) {
-		var err = Z_OK;
-
-		if (_level == Z_DEFAULT_COMPRESSION) {
-			_level = 6;
-		}
-		if (_level < 0 || _level > 9 || _strategy < 0 || _strategy > Z_HUFFMAN_ONLY) {
-			return Z_STREAM_ERROR;
-		}
-
-		if (config_table[level].func != config_table[_level].func && strm.total_in !== 0) {
-			// Flush the last buffer:
-			err = strm.deflate(Z_PARTIAL_FLUSH);
-		}
-
-		if (level != _level) {
-			level = _level;
-			max_lazy_match = config_table[level].max_lazy;
-			good_match = config_table[level].good_length;
-			nice_match = config_table[level].nice_length;
-			max_chain_length = config_table[level].max_chain;
-		}
-		strategy = _strategy;
-		return err;
-	};
-
-	that.deflateSetDictionary = function(strm, dictionary, dictLength) {
-		var length = dictLength;
-		var n, index = 0;
-
-		if (!dictionary || status != INIT_STATE)
-			return Z_STREAM_ERROR;
-
-		if (length < MIN_MATCH)
-			return Z_OK;
-		if (length > w_size - MIN_LOOKAHEAD) {
-			length = w_size - MIN_LOOKAHEAD;
-			index = dictLength - length; // use the tail of the dictionary
-		}
-		
-		var USE_AB = !Array.isArray(window);
-
-    if (USE_AB) {
-  		window.set(dictionary.subarray(index, index + length), 0);
-  	} else {
-  	  arraySet(window, dictionary, index, length, 0);
-  	}
-
-		strstart = length;
-		block_start = length;
-
-		// Insert all strings in the hash table (except for the last two bytes).
-		// s->lookahead stays null, so s->ins_h will be recomputed at the next
-		// call of fill_window.
-
-		ins_h = window[0] & 0xff;
-		ins_h = (((ins_h) << hash_shift) ^ (window[1] & 0xff)) & hash_mask;
-
-		for (n = 0; n <= length - MIN_MATCH; n++) {
-			ins_h = (((ins_h) << hash_shift) ^ (window[(n) + (MIN_MATCH - 1)] & 0xff)) & hash_mask;
-			prev[n & w_mask] = head[ins_h];
-			head[ins_h] = n;
-		}
-		return Z_OK;
-	};
-
-	that.deflate = function(_strm, flush) {
-		var i, header, level_flags, old_flush, bstate;
-
-		if (flush > Z_FINISH || flush < 0) {
-			return Z_STREAM_ERROR;
-		}
-
-		if (!_strm.next_out || (!_strm.next_in && _strm.avail_in !== 0) || (status == FINISH_STATE && flush != Z_FINISH)) {
-			_strm.msg = z_errmsg[Z_NEED_DICT - (Z_STREAM_ERROR)];
-			return Z_STREAM_ERROR;
-		}
-		if (_strm.avail_out === 0) {
-			_strm.msg = z_errmsg[Z_NEED_DICT - (Z_BUF_ERROR)];
-			return Z_BUF_ERROR;
-		}
-
-		strm = _strm; // just in case
-		old_flush = last_flush;
-		last_flush = flush;
-
-		// Write the zlib header
-		if (status == INIT_STATE) {
-			header = (Z_DEFLATED + ((w_bits - 8) << 4)) << 8;
-			level_flags = ((level - 1) & 0xff) >> 1;
-
-			if (level_flags > 3)
-				level_flags = 3;
-			header |= (level_flags << 6);
-			if (strstart !== 0)
-				header |= PRESET_DICT;
-			header += 31 - (header % 31);
-
-			status = BUSY_STATE;
-			putShortMSB(header);
-		}
-
-		// Flush as much pending output as possible
-		if (that.pending !== 0) {
-			strm.flush_pending();
-			if (strm.avail_out === 0) {
-				// console.log(" avail_out==0");
-				// Since avail_out is 0, deflate will be called again with
-				// more output space, but possibly with both pending and
-				// avail_in equal to zero. There won't be anything to do,
-				// but this is not an error situation so make sure we
-				// return OK instead of BUF_ERROR at next call of deflate:
-				last_flush = -1;
-				return Z_OK;
-			}
-
-			// Make sure there is something to do and avoid duplicate
-			// consecutive
-			// flushes. For repeated and useless calls with Z_FINISH, we keep
-			// returning Z_STREAM_END instead of Z_BUFF_ERROR.
-		} else if (strm.avail_in === 0 && flush <= old_flush && flush != Z_FINISH) {
-			strm.msg = z_errmsg[Z_NEED_DICT - (Z_BUF_ERROR)];
-			return Z_BUF_ERROR;
-		}
-
-		// User must not provide more input after the first FINISH:
-		if (status == FINISH_STATE && strm.avail_in !== 0) {
-			_strm.msg = z_errmsg[Z_NEED_DICT - (Z_BUF_ERROR)];
-			return Z_BUF_ERROR;
-		}
-
-		// Start a new block or continue the current one.
-		if (strm.avail_in !== 0 || lookahead !== 0 || (flush != Z_NO_FLUSH && status != FINISH_STATE)) {
-			bstate = -1;
-			switch (config_table[level].func) {
-			case STORED:
-				bstate = deflate_stored(flush);
-				break;
-			case FAST:
-				bstate = deflate_fast(flush);
-				break;
-			case SLOW:
-				bstate = deflate_slow(flush);
-				break;
-			default:
-			}
-
-			if (bstate == FinishStarted || bstate == FinishDone) {
-				status = FINISH_STATE;
-			}
-			if (bstate == NeedMore || bstate == FinishStarted) {
-				if (strm.avail_out === 0) {
-					last_flush = -1; // avoid BUF_ERROR next call, see above
-				}
-				return Z_OK;
-				// If flush != Z_NO_FLUSH && avail_out === 0, the next call
-				// of deflate should use the same flush parameter to make sure
-				// that the flush is complete. So we don't have to output an
-				// empty block here, this will be done at next call. This also
-				// ensures that for a very small output buffer, we emit at most
-				// one empty block.
-			}
-
-			if (bstate == BlockDone) {
-				if (flush == Z_PARTIAL_FLUSH) {
-					_tr_align();
-				} else { // FULL_FLUSH or SYNC_FLUSH
-					_tr_stored_block(0, 0, false);
-					// For a full flush, this empty block will be recognized
-					// as a special marker by inflate_sync().
-					if (flush == Z_FULL_FLUSH) {
-						// state.head[s.hash_size-1]=0;
-						for (i = 0; i < hash_size/*-1*/; i++)
-							// forget history
-							head[i] = 0;
-					}
-				}
-				strm.flush_pending();
-				if (strm.avail_out === 0) {
-					last_flush = -1; // avoid BUF_ERROR at next call, see above
-					return Z_OK;
-				}
-			}
-		}
-
-		if (flush != Z_FINISH)
-			return Z_OK;
-		return Z_STREAM_END;
-	};
-}
-
-// ZStream
-
-function ZStream() {
-	var that = this;
-	that.next_in_index = 0;
-	that.next_out_index = 0;
-	// that.next_in; // next input byte
-	that.avail_in = 0; // number of bytes available at next_in
-	that.total_in = 0; // total nb of input bytes read so far
-	// that.next_out; // next output byte should be put there
-	that.avail_out = 0; // remaining free space at next_out
-	that.total_out = 0; // total nb of bytes output so far
-	// that.msg;
-	// that.dstate;
-}
-
-ZStream.prototype = {
-	deflateInit : function(level, bits) {
-		var that = this;
-		that.dstate = new Deflate();
-		if (!bits)
-			bits = MAX_BITS;
-		return that.dstate.deflateInit(that, level, bits);
-	},
-
-	deflate : function(flush) {
-		var that = this;
-		if (!that.dstate) {
-			return Z_STREAM_ERROR;
-		}
-		return that.dstate.deflate(that, flush);
-	},
-
-	deflateEnd : function() {
-		var that = this;
-		if (!that.dstate)
-			return Z_STREAM_ERROR;
-		var ret = that.dstate.deflateEnd();
-		that.dstate = null;
-		return ret;
-	},
-
-	deflateParams : function(level, strategy) {
-		var that = this;
-		if (!that.dstate)
-			return Z_STREAM_ERROR;
-		return that.dstate.deflateParams(that, level, strategy);
-	},
-
-	deflateSetDictionary : function(dictionary, dictLength) {
-		var that = this;
-		if (!that.dstate)
-			return Z_STREAM_ERROR;
-		return that.dstate.deflateSetDictionary(that, dictionary, dictLength);
-	},
-
-	// Read a new buffer from the current input stream, update the
-	// total number of bytes read. All deflate() input goes through
-	// this function so some applications may wish to modify it to avoid
-	// allocating a large strm->next_in buffer and copying from it.
-	// (See also flush_pending()).
-	read_buf : function(buf, start, size) {
- 		var that = this;
-		var len = that.avail_in;
-		if (len > size)
-			len = size;
-		if (len === 0)
-			return 0;
-		that.avail_in -= len;
-
-    var USE_AB = !Array.isArray(that.next_in);
-
-    if (USE_AB) {
-    	buf.set(that.next_in.subarray(that.next_in_index, that.next_in_index + len), start);
-    } else {
-      arraySet(buf, that.next_in, that.next_in_index, len, start);
-    }
-
-		that.next_in_index += len;
-		that.total_in += len;
-		return len;
-	},
-
-	// Flush as much pending output as possible. All deflate() output goes
-	// through this function so some applications may wish to modify it
-	// to avoid allocating a large strm->next_out buffer and copying into it.
-	// (See also read_buf()).
-	flush_pending : function() {
-		var that = this;
-		var len = that.dstate.pending;
-
-		if (len > that.avail_out)
-			len = that.avail_out;
-		if (len === 0)
-			return;
-
-		// if (that.dstate.pending_buf.length <= that.dstate.pending_out || that.next_out.length <= that.next_out_index
-		// || that.dstate.pending_buf.length < (that.dstate.pending_out + len) || that.next_out.length < (that.next_out_index +
-		// len)) {
-		// console.log(that.dstate.pending_buf.length + ", " + that.dstate.pending_out + ", " + that.next_out.length + ", " +
-		// that.next_out_index + ", " + len);
-		// console.log("avail_out=" + that.avail_out);
-		// }
-    var USE_AB = !Array.isArray(that.next_out);
-
-    if (USE_AB) {
-      that.next_out.set(that.dstate.pending_buf.subarray(that.dstate.pending_out, that.dstate.pending_out + len), that.next_out_index);
-    } else {
-      arraySet(that.next_out, that.dstate.pending_buf, that.dstate.pending_out, len, that.next_out_index);
-    }
-
-		that.next_out_index += len;
-		that.dstate.pending_out += len;
-		that.total_out += len;
-		that.avail_out -= len;
-		that.dstate.pending -= len;
-		if (that.dstate.pending === 0) {
-			that.dstate.pending_out = 0;
-		}
-	}
-};
-
-////////////////////////////////////////////////////////////////////////////////
-// Customized code
-function arraySet(dest, src, src_offs, len, dest_offs) {
-  for(var i=0; i<len; i++) {
-    dest[dest_offs + i] = src[src_offs + i];
-  }
-}
-
-
-function adler32(array) {
-    return adler32_update(1, array);
-}
-
-function adler32_update(adler, array) {
-    var s1 = adler & 0xffff,
-        s2 = (adler >>> 16) & 0xffff;
-    var len = array.length;
-    var tlen;
-    var i = 0;
-
-    while (len > 0) {
-      // 1024 - optimization constant
-      tlen = len > 1024 ? 1024 : len;
-      len -= tlen;
-      do {
-        s1 += array[i++];
-        s2 += s1;
-      } while (--tlen);
-
-      s1 %= 65521;
-      s2 %= 65521;
-    }
-
-    return ((s2 << 16) | s1) >>> 0;
-}
-
-function deflate(data, level) {
-  var USE_AB = !Array.isArray(data);
-
-	var z = new ZStream();
-
-	var bufsize = 1024;
-	var buf = USE_AB ? new Uint8Array(bufsize) : new Array(bufsize);
-
-	if (typeof level == "undefined")
-		level = Z_DEFAULT_COMPRESSION;
-
-	z.deflateInit(level);
-	z.next_out = buf;
-
-	var err, buffers = [], bufferIndex = 0, bufferSize = 0, array;
-
-	if (!data.length)
-		return;
-
-	z.next_in_index = 0;
-	z.next_in = data;
-	z.avail_in = data.length;
-
-  // push data 
-	do {
-		z.next_out_index = 0;
-		z.avail_out = bufsize;
-
-		err = z.deflate(Z_NO_FLUSH);
-
-		if (err != Z_OK) { throw "deflating: " + z.msg; }
-
-		if (z.next_out_index) {
-			if (z.next_out_index == bufsize) {
-				buffers.push(USE_AB ? new Uint8Array(buf) : buf.slice());
-			} else {
-				buffers.push(USE_AB ?
-				  new Uint8Array(buf.subarray(0, z.next_out_index))
-				  :
-				  buf.slice(0, z.next_out_index)				  
-				);
-			}
-    }
-
-		bufferSize += z.next_out_index;
-
-	} while (z.avail_in > 0 || z.avail_out === 0);
-
-  // Finalize deflate, flush internal buffers
-	do {
-		z.next_out_index = 0;
-		z.avail_out = bufsize;
-
-		err = z.deflate(Z_FINISH);
-
-		if (err != Z_STREAM_END && err != Z_OK) { throw "deflating: " + z.msg; }
-
-		if (bufsize - z.avail_out > 0) {
-			buffers.push(USE_AB ?
-			  new Uint8Array(buf.subarray(0, z.next_out_index))
-			  :
-			  buf.slice(0, z.next_out_index)
-		  );
-		}
-
-		bufferSize += z.next_out_index;
-
-	} while (z.avail_in > 0 || z.avail_out === 0);
-
-	z.deflateEnd();
-
-  // Final rezult = (2-bytes header) + (raw data) + (4 byte Adler32)
-	var result = USE_AB ? new Uint8Array(bufferSize + 6) : new Array(bufferSize + 6);
-
-  // FIXME: use proper constants
-  var cmf = (7 << 4) | 8;
-  var fdict = 0;
-  var flg = (2 << 6) | (fdict << 5);
-  var fcheck = 31 - (cmf * 256 + flg) % 31;
-  flg |= fcheck;  
-
-  result[bufferIndex++] = cmf;
-  result[bufferIndex++] = flg;
-	
-	buffers.forEach(function(chunk) {
-	  if (USE_AB) {
-  		result.set(chunk, bufferIndex);
-	  } else {
-	    arraySet(result, chunk, 0, chunk.length, bufferIndex);
-	  }
-		bufferIndex += chunk.length;
-	});
-
-  var adler = adler32(data);
-
-  result[bufferIndex++] = (adler >> 24) & 0xff;
-  result[bufferIndex++] = (adler >> 16) & 0xff;
-  result[bufferIndex++] = (adler >> 8) & 0xff;
-  result[bufferIndex++] = adler & 0xff;
-  
-	return result;
-}
-
-module.exports = deflate;
-