smock 0.1.207 → 0.1.208

data/node_modules/webpack/node_modules/node-libs-browser/node_modules/browserify-zlib/node_modules/pako/benchmark/implementations/deflate-gildas/deflate.js

@@ -0,0 +1,2171 @@
+/*
+ Copyright (c) 2013 Gildas Lormeau. All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright 
+ notice, this list of conditions and the following disclaimer in 
+ the documentation and/or other materials provided with the distribution.
+
+ 3. The names of the authors may not be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL JCRAFT,
+ INC. OR ANY CONTRIBUTORS TO THIS SOFTWARE BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * This program is based on JZlib 1.0.2 ymnk, JCraft,Inc.
+ * JZlib is based on zlib-1.1.3, so all credit should go authors
+ * Jean-loup Gailly(jloup@gzip.org) and Mark Adler(madler@alumni.caltech.edu)
+ * and contributors of zlib.
+ */
+
+/*
+ Based on https://github.com/gildas-lormeau/zip.js/tree/master/WebContent
+
+ Changes by Vitaly Puzrin (github.com/puzrin), 2013
+
+ - Added deflate header/adler32
+ - Added regular arrays support for old browsers
+
+ */
+
+var CAN_AB =  (typeof Uint8Array !== 'undefined') &&
+              (typeof Uint16Array !== 'undefined') &&
+              (typeof Uint32Array !== 'undefined');
+
+	// Global
+
+var MAX_BITS = 15;
+var D_CODES = 30;
+var BL_CODES = 19;
+
+var LENGTH_CODES = 29;
+var LITERALS = 256;
+var L_CODES = (LITERALS + 1 + LENGTH_CODES);
+var HEAP_SIZE = (2 * L_CODES + 1);
+
+var END_BLOCK = 256;
+
+// Bit length codes must not exceed MAX_BL_BITS bits
+var MAX_BL_BITS = 7;
+
+// repeat previous bit length 3-6 times (2 bits of repeat count)
+var REP_3_6 = 16;
+
+// repeat a zero length 3-10 times (3 bits of repeat count)
+var REPZ_3_10 = 17;
+
+// repeat a zero length 11-138 times (7 bits of repeat count)
+var REPZ_11_138 = 18;
+
+// The lengths of the bit length codes are sent in order of decreasing
+// probability, to avoid transmitting the lengths for unused bit
+// length codes.
+
+var Buf_size = 8 * 2;
+
+// JZlib version : "1.0.2"
+var Z_DEFAULT_COMPRESSION = -1;
+
+// compression strategy
+var Z_FILTERED = 1;
+var Z_HUFFMAN_ONLY = 2;
+var Z_DEFAULT_STRATEGY = 0;
+
+var Z_NO_FLUSH = 0;
+var Z_PARTIAL_FLUSH = 1;
+var Z_FULL_FLUSH = 3;
+var Z_FINISH = 4;
+
+var Z_OK = 0;
+var Z_STREAM_END = 1;
+var Z_NEED_DICT = 2;
+var Z_STREAM_ERROR = -2;
+var Z_DATA_ERROR = -3;
+var Z_BUF_ERROR = -5;
+
+// Tree
+
+// see definition of array dist_code below
+var _dist_code = [ 0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 6, 7, 7, 7, 7, 8, 8, 8, 8, 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10,
+		10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
+		12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
+		13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+		14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+		14, 14, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+		15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 0, 0, 16, 17, 18, 18, 19, 19,
+		20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+		24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+		26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+		27, 27, 27, 27, 27, 27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+		28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 29,
+		29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+		29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29 ];
+
+function Tree() {
+	var that = this;
+
+	// dyn_tree; // the dynamic tree
+	// max_code; // largest code with non zero frequency
+	// stat_desc; // the corresponding static tree
+
+	// Compute the optimal bit lengths for a tree and update the total bit
+	// length
+	// for the current block.
+	// IN assertion: the fields freq and dad are set, heap[heap_max] and
+	// above are the tree nodes sorted by increasing frequency.
+	// OUT assertions: the field len is set to the optimal bit length, the
+	// array bl_count contains the frequencies for each bit length.
+	// The length opt_len is updated; static_len is also updated if stree is
+	// not null.
+	function gen_bitlen(s) {
+		var tree = that.dyn_tree;
+		var stree = that.stat_desc.static_tree;
+		var extra = that.stat_desc.extra_bits;
+		var base = that.stat_desc.extra_base;
+		var max_length = that.stat_desc.max_length;
+		var h; // heap index
+		var n, m; // iterate over the tree elements
+		var bits; // bit length
+		var xbits; // extra bits
+		var f; // frequency
+		var overflow = 0; // number of elements with bit length too large
+
+		for (bits = 0; bits <= MAX_BITS; bits++)
+			s.bl_count[bits] = 0;
+
+		// In a first pass, compute the optimal bit lengths (which may
+		// overflow in the case of the bit length tree).
+		tree[s.heap[s.heap_max] * 2 + 1] = 0; // root of the heap
+
+		for (h = s.heap_max + 1; h < HEAP_SIZE; h++) {
+			n = s.heap[h];
+			bits = tree[tree[n * 2 + 1] * 2 + 1] + 1;
+			if (bits > max_length) {
+				bits = max_length;
+				overflow++;
+			}
+			tree[n * 2 + 1] = bits;
+			// We overwrite tree[n*2+1] which is no longer needed
+
+			if (n > that.max_code)
+				continue; // not a leaf node
+
+			s.bl_count[bits]++;
+			xbits = 0;
+			if (n >= base)
+				xbits = extra[n - base];
+			f = tree[n * 2];
+			s.opt_len += f * (bits + xbits);
+			if (stree)
+				s.static_len += f * (stree[n * 2 + 1] + xbits);
+		}
+		if (overflow === 0)
+			return;
+
+		// This happens for example on obj2 and pic of the Calgary corpus
+		// Find the first bit length which could increase:
+		do {
+			bits = max_length - 1;
+			while (s.bl_count[bits] === 0)
+				bits--;
+			s.bl_count[bits]--; // move one leaf down the tree
+			s.bl_count[bits + 1] += 2; // move one overflow item as its brother
+			s.bl_count[max_length]--;
+			// The brother of the overflow item also moves one step up,
+			// but this does not affect bl_count[max_length]
+			overflow -= 2;
+		} while (overflow > 0);
+
+		for (bits = max_length; bits !== 0; bits--) {
+			n = s.bl_count[bits];
+			while (n !== 0) {
+				m = s.heap[--h];
+				if (m > that.max_code)
+					continue;
+				if (tree[m * 2 + 1] != bits) {
+					s.opt_len += (bits - tree[m * 2 + 1]) * tree[m * 2];
+					tree[m * 2 + 1] = bits;
+				}
+				n--;
+			}
+		}
+	}
+
+	// Reverse the first len bits of a code, using straightforward code (a
+	// faster
+	// method would use a table)
+	// IN assertion: 1 <= len <= 15
+	function bi_reverse(code, // the value to invert
+	len // its bit length
+	) {
+		var res = 0;
+		do {
+			res |= code & 1;
+			code >>>= 1;
+			res <<= 1;
+		} while (--len > 0);
+		return res >>> 1;
+	}
+
+	// Generate the codes for a given tree and bit counts (which need not be
+	// optimal).
+	// IN assertion: the array bl_count contains the bit length statistics for
+	// the given tree and the field len is set for all tree elements.
+	// OUT assertion: the field code is set for all tree elements of non
+	// zero code length.
+	function gen_codes(tree, // the tree to decorate
+	max_code, // largest code with non zero frequency
+	bl_count // number of codes at each bit length
+	) {
+		var next_code = []; // next code value for each
+		// bit length
+		var code = 0; // running code value
+		var bits; // bit index
+		var n; // code index
+		var len;
+
+		// The distribution counts are first used to generate the code values
+		// without bit reversal.
+		for (bits = 1; bits <= MAX_BITS; bits++) {
+			next_code[bits] = code = ((code + bl_count[bits - 1]) << 1);
+		}
+
+		// Check that the bit counts in bl_count are consistent. The last code
+		// must be all ones.
+		// Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
+		// "inconsistent bit counts");
+		// Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
+
+		for (n = 0; n <= max_code; n++) {
+			len = tree[n * 2 + 1];
+			if (len === 0)
+				continue;
+			// Now reverse the bits
+			tree[n * 2] = bi_reverse(next_code[len]++, len);
+		}
+	}
+
+	// Construct one Huffman tree and assigns the code bit strings and lengths.
+	// Update the total bit length for the current block.
+	// IN assertion: the field freq is set for all tree elements.
+	// OUT assertions: the fields len and code are set to the optimal bit length
+	// and corresponding code. The length opt_len is updated; static_len is
+	// also updated if stree is not null. The field max_code is set.
+	that.build_tree = function(s) {
+		var tree = that.dyn_tree;
+		var stree = that.stat_desc.static_tree;
+		var elems = that.stat_desc.elems;
+		var n, m; // iterate over heap elements
+		var max_code = -1; // largest code with non zero frequency
+		var node; // new node being created
+
+		// Construct the initial heap, with least frequent element in
+		// heap[1]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
+		// heap[0] is not used.
+		s.heap_len = 0;
+		s.heap_max = HEAP_SIZE;
+
+		for (n = 0; n < elems; n++) {
+			if (tree[n * 2] !== 0) {
+				s.heap[++s.heap_len] = max_code = n;
+				s.depth[n] = 0;
+			} else {
+				tree[n * 2 + 1] = 0;
+			}
+		}
+
+		// The pkzip format requires that at least one distance code exists,
+		// and that at least one bit should be sent even if there is only one
+		// possible code. So to avoid special checks later on we force at least
+		// two codes of non zero frequency.
+		while (s.heap_len < 2) {
+			node = s.heap[++s.heap_len] = max_code < 2 ? ++max_code : 0;
+			tree[node * 2] = 1;
+			s.depth[node] = 0;
+			s.opt_len--;
+			if (stree)
+				s.static_len -= stree[node * 2 + 1];
+			// node is 0 or 1 so it does not have extra bits
+		}
+		that.max_code = max_code;
+
+		// The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
+		// establish sub-heaps of increasing lengths:
+
+		for (n = Math.floor(s.heap_len / 2); n >= 1; n--)
+			s.pqdownheap(tree, n);
+
+		// Construct the Huffman tree by repeatedly combining the least two
+		// frequent nodes.
+
+		node = elems; // next internal node of the tree
+		do {
+			// n = node of least frequency
+			n = s.heap[1];
+			s.heap[1] = s.heap[s.heap_len--];
+			s.pqdownheap(tree, 1);
+			m = s.heap[1]; // m = node of next least frequency
+
+			s.heap[--s.heap_max] = n; // keep the nodes sorted by frequency
+			s.heap[--s.heap_max] = m;
+
+			// Create a new node father of n and m
+			tree[node * 2] = (tree[n * 2] + tree[m * 2]);
+			s.depth[node] = Math.max(s.depth[n], s.depth[m]) + 1;
+			tree[n * 2 + 1] = tree[m * 2 + 1] = node;
+
+			// and insert the new node in the heap
+			s.heap[1] = node++;
+			s.pqdownheap(tree, 1);
+		} while (s.heap_len >= 2);
+
+		s.heap[--s.heap_max] = s.heap[1];
+
+		// At this point, the fields freq and dad are set. We can now
+		// generate the bit lengths.
+
+		gen_bitlen(s);
+
+		// The field len is now set, we can generate the bit codes
+		gen_codes(tree, that.max_code, s.bl_count);
+	};
+
+}
+
+Tree._length_code = [ 0, 1, 2, 3, 4, 5, 6, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 12, 12, 13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16,
+		16, 16, 16, 16, 17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19, 19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20,
+		20, 20, 20, 20, 20, 20, 20, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22,
+		22, 22, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+		24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+		25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+		26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28 ];
+
+Tree.base_length = [ 0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 0 ];
+
+Tree.base_dist = [ 0, 1, 2, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192, 256, 384, 512, 768, 1024, 1536, 2048, 3072, 4096, 6144, 8192, 12288, 16384,
+		24576 ];
+
+// Mapping from a distance to a distance code. dist is the distance - 1 and
+// must not have side effects. _dist_code[256] and _dist_code[257] are never
+// used.
+Tree.d_code = function(dist) {
+	return ((dist) < 256 ? _dist_code[dist] : _dist_code[256 + ((dist) >>> 7)]);
+};
+
+// extra bits for each length code
+Tree.extra_lbits = [ 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0 ];
+
+// extra bits for each distance code
+Tree.extra_dbits = [ 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 13, 13 ];
+
+// extra bits for each bit length code
+Tree.extra_blbits = [ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 3, 7 ];
+
+Tree.bl_order = [ 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15 ];
+
+// StaticTree
+
+function StaticTree(static_tree, extra_bits, extra_base, elems, max_length) {
+	var that = this;
+	that.static_tree = static_tree;
+	that.extra_bits = extra_bits;
+	that.extra_base = extra_base;
+	that.elems = elems;
+	that.max_length = max_length;
+}
+
+StaticTree.static_ltree = [ 12, 8, 140, 8, 76, 8, 204, 8, 44, 8, 172, 8, 108, 8, 236, 8, 28, 8, 156, 8, 92, 8, 220, 8, 60, 8, 188, 8, 124, 8, 252, 8, 2, 8,
+		130, 8, 66, 8, 194, 8, 34, 8, 162, 8, 98, 8, 226, 8, 18, 8, 146, 8, 82, 8, 210, 8, 50, 8, 178, 8, 114, 8, 242, 8, 10, 8, 138, 8, 74, 8, 202, 8, 42,
+		8, 170, 8, 106, 8, 234, 8, 26, 8, 154, 8, 90, 8, 218, 8, 58, 8, 186, 8, 122, 8, 250, 8, 6, 8, 134, 8, 70, 8, 198, 8, 38, 8, 166, 8, 102, 8, 230, 8,
+		22, 8, 150, 8, 86, 8, 214, 8, 54, 8, 182, 8, 118, 8, 246, 8, 14, 8, 142, 8, 78, 8, 206, 8, 46, 8, 174, 8, 110, 8, 238, 8, 30, 8, 158, 8, 94, 8,
+		222, 8, 62, 8, 190, 8, 126, 8, 254, 8, 1, 8, 129, 8, 65, 8, 193, 8, 33, 8, 161, 8, 97, 8, 225, 8, 17, 8, 145, 8, 81, 8, 209, 8, 49, 8, 177, 8, 113,
+		8, 241, 8, 9, 8, 137, 8, 73, 8, 201, 8, 41, 8, 169, 8, 105, 8, 233, 8, 25, 8, 153, 8, 89, 8, 217, 8, 57, 8, 185, 8, 121, 8, 249, 8, 5, 8, 133, 8,
+		69, 8, 197, 8, 37, 8, 165, 8, 101, 8, 229, 8, 21, 8, 149, 8, 85, 8, 213, 8, 53, 8, 181, 8, 117, 8, 245, 8, 13, 8, 141, 8, 77, 8, 205, 8, 45, 8,
+		173, 8, 109, 8, 237, 8, 29, 8, 157, 8, 93, 8, 221, 8, 61, 8, 189, 8, 125, 8, 253, 8, 19, 9, 275, 9, 147, 9, 403, 9, 83, 9, 339, 9, 211, 9, 467, 9,
+		51, 9, 307, 9, 179, 9, 435, 9, 115, 9, 371, 9, 243, 9, 499, 9, 11, 9, 267, 9, 139, 9, 395, 9, 75, 9, 331, 9, 203, 9, 459, 9, 43, 9, 299, 9, 171, 9,
+		427, 9, 107, 9, 363, 9, 235, 9, 491, 9, 27, 9, 283, 9, 155, 9, 411, 9, 91, 9, 347, 9, 219, 9, 475, 9, 59, 9, 315, 9, 187, 9, 443, 9, 123, 9, 379,
+		9, 251, 9, 507, 9, 7, 9, 263, 9, 135, 9, 391, 9, 71, 9, 327, 9, 199, 9, 455, 9, 39, 9, 295, 9, 167, 9, 423, 9, 103, 9, 359, 9, 231, 9, 487, 9, 23,
+		9, 279, 9, 151, 9, 407, 9, 87, 9, 343, 9, 215, 9, 471, 9, 55, 9, 311, 9, 183, 9, 439, 9, 119, 9, 375, 9, 247, 9, 503, 9, 15, 9, 271, 9, 143, 9,
+		399, 9, 79, 9, 335, 9, 207, 9, 463, 9, 47, 9, 303, 9, 175, 9, 431, 9, 111, 9, 367, 9, 239, 9, 495, 9, 31, 9, 287, 9, 159, 9, 415, 9, 95, 9, 351, 9,
+		223, 9, 479, 9, 63, 9, 319, 9, 191, 9, 447, 9, 127, 9, 383, 9, 255, 9, 511, 9, 0, 7, 64, 7, 32, 7, 96, 7, 16, 7, 80, 7, 48, 7, 112, 7, 8, 7, 72, 7,
+		40, 7, 104, 7, 24, 7, 88, 7, 56, 7, 120, 7, 4, 7, 68, 7, 36, 7, 100, 7, 20, 7, 84, 7, 52, 7, 116, 7, 3, 8, 131, 8, 67, 8, 195, 8, 35, 8, 163, 8,
+		99, 8, 227, 8 ];
+
+StaticTree.static_dtree = [ 0, 5, 16, 5, 8, 5, 24, 5, 4, 5, 20, 5, 12, 5, 28, 5, 2, 5, 18, 5, 10, 5, 26, 5, 6, 5, 22, 5, 14, 5, 30, 5, 1, 5, 17, 5, 9, 5,
+		25, 5, 5, 5, 21, 5, 13, 5, 29, 5, 3, 5, 19, 5, 11, 5, 27, 5, 7, 5, 23, 5 ];
+
+StaticTree.static_l_desc = new StaticTree(StaticTree.static_ltree, Tree.extra_lbits, LITERALS + 1, L_CODES, MAX_BITS);
+
+StaticTree.static_d_desc = new StaticTree(StaticTree.static_dtree, Tree.extra_dbits, 0, D_CODES, MAX_BITS);
+
+StaticTree.static_bl_desc = new StaticTree(null, Tree.extra_blbits, 0, BL_CODES, MAX_BL_BITS);
+
+// Deflate
+
+var MAX_MEM_LEVEL = 9;
+var DEF_MEM_LEVEL = 8;
+
+function Config(good_length, max_lazy, nice_length, max_chain, func) {
+	var that = this;
+	that.good_length = good_length;
+	that.max_lazy = max_lazy;
+	that.nice_length = nice_length;
+	that.max_chain = max_chain;
+	that.func = func;
+}
+
+var STORED = 0;
+var FAST = 1;
+var SLOW = 2;
+var config_table = [ new Config(0, 0, 0, 0, STORED), new Config(4, 4, 8, 4, FAST), new Config(4, 5, 16, 8, FAST), new Config(4, 6, 32, 32, FAST),
+		new Config(4, 4, 16, 16, SLOW), new Config(8, 16, 32, 32, SLOW), new Config(8, 16, 128, 128, SLOW), new Config(8, 32, 128, 256, SLOW),
+		new Config(32, 128, 258, 1024, SLOW), new Config(32, 258, 258, 4096, SLOW) ];
+
+var z_errmsg = [ "need dictionary", // Z_NEED_DICT
+// 2
+"stream end", // Z_STREAM_END 1
+"", // Z_OK 0
+"", // Z_ERRNO (-1)
+"stream error", // Z_STREAM_ERROR (-2)
+"data error", // Z_DATA_ERROR (-3)
+"", // Z_MEM_ERROR (-4)
+"buffer error", // Z_BUF_ERROR (-5)
+"",// Z_VERSION_ERROR (-6)
+"" ];
+
+// block not completed, need more input or more output
+var NeedMore = 0;
+
+// block flush performed
+var BlockDone = 1;
+
+// finish started, need only more output at next deflate
+var FinishStarted = 2;
+
+// finish done, accept no more input or output
+var FinishDone = 3;
+
+// preset dictionary flag in zlib header
+var PRESET_DICT = 0x20;
+
+var INIT_STATE = 42;
+var BUSY_STATE = 113;
+var FINISH_STATE = 666;
+
+// The deflate compression method
+var Z_DEFLATED = 8;
+
+var STORED_BLOCK = 0;
+var STATIC_TREES = 1;
+var DYN_TREES = 2;
+
+var MIN_MATCH = 3;
+var MAX_MATCH = 258;
+var MIN_LOOKAHEAD = (MAX_MATCH + MIN_MATCH + 1);
+
+function smaller(tree, n, m, depth) {
+	var tn2 = tree[n * 2];
+	var tm2 = tree[m * 2];
+	return (tn2 < tm2 || (tn2 == tm2 && depth[n] <= depth[m]));
+}
+
+function Deflate() {
+
+	var that = this;
+	var strm; // pointer back to this zlib stream
+	var status; // as the name implies
+	// pending_buf; // output still pending
+	var pending_buf_size; // size of pending_buf
+	// pending_out; // next pending byte to output to the stream
+	// pending; // nb of bytes in the pending buffer
+	var method; // STORED (for zip only) or DEFLATED
+	var last_flush; // value of flush param for previous deflate call
+
+	var w_size; // LZ77 window size (32K by default)
+	var w_bits; // log2(w_size) (8..16)
+	var w_mask; // w_size - 1
+
+	var window;
+	// Sliding window. Input bytes are read into the second half of the window,
+	// and move to the first half later to keep a dictionary of at least wSize
+	// bytes. With this organization, matches are limited to a distance of
+	// wSize-MAX_MATCH bytes, but this ensures that IO is always
+	// performed with a length multiple of the block size. Also, it limits
+	// the window size to 64K, which is quite useful on MSDOS.
+	// To do: use the user input buffer as sliding window.
+
+	var window_size;
+	// Actual size of window: 2*wSize, except when the user input buffer
+	// is directly used as sliding window.
+
+	var prev;
+	// Link to older string with same hash index. To limit the size of this
+	// array to 64K, this link is maintained only for the last 32K strings.
+	// An index in this array is thus a window index modulo 32K.
+
+	var head; // Heads of the hash chains or NIL.
+
+	var ins_h; // hash index of string to be inserted
+	var hash_size; // number of elements in hash table
+	var hash_bits; // log2(hash_size)
+	var hash_mask; // hash_size-1
+
+	// Number of bits by which ins_h must be shifted at each input
+	// step. It must be such that after MIN_MATCH steps, the oldest
+	// byte no longer takes part in the hash key, that is:
+	// hash_shift * MIN_MATCH >= hash_bits
+	var hash_shift;
+
+	// Window position at the beginning of the current output block. Gets
+	// negative when the window is moved backwards.
+
+	var block_start;
+
+	var match_length; // length of best match
+	var prev_match; // previous match
+	var match_available; // set if previous match exists
+	var strstart; // start of string to insert
+	var match_start; // start of matching string
+	var lookahead; // number of valid bytes ahead in window
+
+	// Length of the best match at previous step. Matches not greater than this
+	// are discarded. This is used in the lazy match evaluation.
+	var prev_length;
+
+	// To speed up deflation, hash chains are never searched beyond this
+	// length. A higher limit improves compression ratio but degrades the speed.
+	var max_chain_length;
+
+	// Attempt to find a better match only when the current match is strictly
+	// smaller than this value. This mechanism is used only for compression
+	// levels >= 4.
+	var max_lazy_match;
+
+	// Insert new strings in the hash table only if the match length is not
+	// greater than this length. This saves time but degrades compression.
+	// max_insert_length is used only for compression levels <= 3.
+
+	var level; // compression level (1..9)
+	var strategy; // favor or force Huffman coding
+
+	// Use a faster search when the previous match is longer than this
+	var good_match;
+
+	// Stop searching when current match exceeds this
+	var nice_match;
+
+	var dyn_ltree; // literal and length tree
+	var dyn_dtree; // distance tree
+	var bl_tree; // Huffman tree for bit lengths
+
+	var l_desc = new Tree(); // desc for literal tree
+	var d_desc = new Tree(); // desc for distance tree
+	var bl_desc = new Tree(); // desc for bit length tree
+
+	// that.heap_len; // number of elements in the heap
+	// that.heap_max; // element of largest frequency
+	// The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
+	// The same heap array is used to build all trees.
+
+	// Depth of each subtree used as tie breaker for trees of equal frequency
+	that.depth = [];
+
+	var l_buf; // index for literals or lengths */
+
+	// Size of match buffer for literals/lengths. There are 4 reasons for
+	// limiting lit_bufsize to 64K:
+	// - frequencies can be kept in 16 bit counters
+	// - if compression is not successful for the first block, all input
+	// data is still in the window so we can still emit a stored block even
+	// when input comes from standard input. (This can also be done for
+	// all blocks if lit_bufsize is not greater than 32K.)
+	// - if compression is not successful for a file smaller than 64K, we can
+	// even emit a stored file instead of a stored block (saving 5 bytes).
+	// This is applicable only for zip (not gzip or zlib).
+	// - creating new Huffman trees less frequently may not provide fast
+	// adaptation to changes in the input data statistics. (Take for
+	// example a binary file with poorly compressible code followed by
+	// a highly compressible string table.) Smaller buffer sizes give
+	// fast adaptation but have of course the overhead of transmitting
+	// trees more frequently.
+	// - I can't count above 4
+	var lit_bufsize;
+
+	var last_lit; // running index in l_buf
+
+	// Buffer for distances. To simplify the code, d_buf and l_buf have
+	// the same number of elements. To use different lengths, an extra flag
+	// array would be necessary.
+
+	var d_buf; // index of pendig_buf
+
+	// that.opt_len; // bit length of current block with optimal trees
+	// that.static_len; // bit length of current block with static trees
+	var matches; // number of string matches in current block
+	var last_eob_len; // bit length of EOB code for last block
+
+	// Output buffer. bits are inserted starting at the bottom (least
+	// significant bits).
+	var bi_buf;
+
+	// Number of valid bits in bi_buf. All bits above the last valid bit
+	// are always zero.
+	var bi_valid;
+
+	// number of codes at each bit length for an optimal tree
+	that.bl_count = [];
+
+	// heap used to build the Huffman trees
+	that.heap = [];
+
+	dyn_ltree = [];
+	dyn_dtree = [];
+	bl_tree = [];
+
+	function lm_init() {
+		var i;
+		window_size = 2 * w_size;
+
+		head[hash_size - 1] = 0;
+		for (i = 0; i < hash_size - 1; i++) {
+			head[i] = 0;
+		}
+
+		// Set the default configuration parameters:
+		max_lazy_match = config_table[level].max_lazy;
+		good_match = config_table[level].good_length;
+		nice_match = config_table[level].nice_length;
+		max_chain_length = config_table[level].max_chain;
+
+		strstart = 0;
+		block_start = 0;
+		lookahead = 0;
+		match_length = prev_length = MIN_MATCH - 1;
+		match_available = 0;
+		ins_h = 0;
+	}
+
+	function init_block() {
+		var i;
+		// Initialize the trees.
+		for (i = 0; i < L_CODES; i++)
+			dyn_ltree[i * 2] = 0;
+		for (i = 0; i < D_CODES; i++)
+			dyn_dtree[i * 2] = 0;
+		for (i = 0; i < BL_CODES; i++)
+			bl_tree[i * 2] = 0;
+
+		dyn_ltree[END_BLOCK * 2] = 1;
+		that.opt_len = that.static_len = 0;
+		last_lit = matches = 0;
+	}
+
+	// Initialize the tree data structures for a new zlib stream.
+	function tr_init() {
+
+		l_desc.dyn_tree = dyn_ltree;
+		l_desc.stat_desc = StaticTree.static_l_desc;
+
+		d_desc.dyn_tree = dyn_dtree;
+		d_desc.stat_desc = StaticTree.static_d_desc;
+
+		bl_desc.dyn_tree = bl_tree;
+		bl_desc.stat_desc = StaticTree.static_bl_desc;
+
+		bi_buf = 0;
+		bi_valid = 0;
+		last_eob_len = 8; // enough lookahead for inflate
+
+		// Initialize the first block of the first file:
+		init_block();
+	}
+
+	// Restore the heap property by moving down the tree starting at node k,
+	// exchanging a node with the smallest of its two sons if necessary,
+	// stopping
+	// when the heap property is re-established (each father smaller than its
+	// two sons).
+	that.pqdownheap = function(tree, // the tree to restore
+	k // node to move down
+	) {
+		var heap = that.heap;
+		var v = heap[k];
+		var j = k << 1; // left son of k
+		while (j <= that.heap_len) {
+			// Set j to the smallest of the two sons:
+			if (j < that.heap_len && smaller(tree, heap[j + 1], heap[j], that.depth)) {
+				j++;
+			}
+			// Exit if v is smaller than both sons
+			if (smaller(tree, v, heap[j], that.depth))
+				break;
+
+			// Exchange v with the smallest son
+			heap[k] = heap[j];
+			k = j;
+			// And continue down the tree, setting j to the left son of k
+			j <<= 1;
+		}
+		heap[k] = v;
+	};
+
+	// Scan a literal or distance tree to determine the frequencies of the codes
+	// in the bit length tree.
+	function scan_tree(tree,// the tree to be scanned
+	max_code // and its largest code of non zero frequency
+	) {
+		var n; // iterates over all tree elements
+		var prevlen = -1; // last emitted length
+		var curlen; // length of current code
+		var nextlen = tree[0 * 2 + 1]; // length of next code
+		var count = 0; // repeat count of the current code
+		var max_count = 7; // max repeat count
+		var min_count = 4; // min repeat count
+
+		if (nextlen === 0) {
+			max_count = 138;
+			min_count = 3;
+		}
+		tree[(max_code + 1) * 2 + 1] = 0xffff; // guard
+
+		for (n = 0; n <= max_code; n++) {
+			curlen = nextlen;
+			nextlen = tree[(n + 1) * 2 + 1];
+			if (++count < max_count && curlen == nextlen) {
+				continue;
+			} else if (count < min_count) {
+				bl_tree[curlen * 2] += count;
+			} else if (curlen !== 0) {
+				if (curlen != prevlen)
+					bl_tree[curlen * 2]++;
+				bl_tree[REP_3_6 * 2]++;
+			} else if (count <= 10) {
+				bl_tree[REPZ_3_10 * 2]++;
+			} else {
+				bl_tree[REPZ_11_138 * 2]++;
+			}
+			count = 0;
+			prevlen = curlen;
+			if (nextlen === 0) {
+				max_count = 138;
+				min_count = 3;
+			} else if (curlen == nextlen) {
+				max_count = 6;
+				min_count = 3;
+			} else {
+				max_count = 7;
+				min_count = 4;
+			}
+		}
+	}
+
+	// Construct the Huffman tree for the bit lengths and return the index in
+	// bl_order of the last bit length code to send.
+	function build_bl_tree() {
+		var max_blindex; // index of last bit length code of non zero freq
+
+		// Determine the bit length frequencies for literal and distance trees
+		scan_tree(dyn_ltree, l_desc.max_code);
+		scan_tree(dyn_dtree, d_desc.max_code);
+
+		// Build the bit length tree:
+		bl_desc.build_tree(that);
+		// opt_len now includes the length of the tree representations, except
+		// the lengths of the bit lengths codes and the 5+5+4 bits for the
+		// counts.
+
+		// Determine the number of bit length codes to send. The pkzip format
+		// requires that at least 4 bit length codes be sent. (appnote.txt says
+		// 3 but the actual value used is 4.)
+		for (max_blindex = BL_CODES - 1; max_blindex >= 3; max_blindex--) {
+			if (bl_tree[Tree.bl_order[max_blindex] * 2 + 1] !== 0)
+				break;
+		}
+		// Update opt_len to include the bit length tree and counts
+		that.opt_len += 3 * (max_blindex + 1) + 5 + 5 + 4;
+
+		return max_blindex;
+	}
+
+	// Output a byte on the stream.
+	// IN assertion: there is enough room in pending_buf.
+	function put_byte(p) {
+		that.pending_buf[that.pending++] = p;
+	}
+
+	function put_short(w) {
+		put_byte(w & 0xff);
+		put_byte((w >>> 8) & 0xff);
+	}
+
+	function putShortMSB(b) {
+		put_byte((b >> 8) & 0xff);
+		put_byte((b & 0xff) & 0xff);
+	}
+
+	function send_bits(value, length) {
+		var val, len = length;
+		if (bi_valid > Buf_size - len) {
+			val = value;
+			// bi_buf |= (val << bi_valid);
+			bi_buf |= ((val << bi_valid) & 0xffff);
+			put_short(bi_buf);
+			bi_buf = val >>> (Buf_size - bi_valid);
+			bi_valid += len - Buf_size;
+		} else {
+			// bi_buf |= (value) << bi_valid;
+			bi_buf |= (((value) << bi_valid) & 0xffff);
+			bi_valid += len;
+		}
+	}
+
+	function send_code(c, tree) {
+		var c2 = c * 2;
+		send_bits(tree[c2] & 0xffff, tree[c2 + 1] & 0xffff);
+	}
+
+	// Send a literal or distance tree in compressed form, using the codes in
+	// bl_tree.
+	function send_tree(tree,// the tree to be sent
+	max_code // and its largest code of non zero frequency
+	) {
+		var n; // iterates over all tree elements
+		var prevlen = -1; // last emitted length
+		var curlen; // length of current code
+		var nextlen = tree[0 * 2 + 1]; // length of next code
+		var count = 0; // repeat count of the current code
+		var max_count = 7; // max repeat count
+		var min_count = 4; // min repeat count
+
+		if (nextlen === 0) {
+			max_count = 138;
+			min_count = 3;
+		}
+
+		for (n = 0; n <= max_code; n++) {
+			curlen = nextlen;
+			nextlen = tree[(n + 1) * 2 + 1];
+			if (++count < max_count && curlen == nextlen) {
+				continue;
+			} else if (count < min_count) {
+				do {
+					send_code(curlen, bl_tree);
+				} while (--count !== 0);
+			} else if (curlen !== 0) {
+				if (curlen != prevlen) {
+					send_code(curlen, bl_tree);
+					count--;
+				}
+				send_code(REP_3_6, bl_tree);
+				send_bits(count - 3, 2);
+			} else if (count <= 10) {
+				send_code(REPZ_3_10, bl_tree);
+				send_bits(count - 3, 3);
+			} else {
+				send_code(REPZ_11_138, bl_tree);
+				send_bits(count - 11, 7);
+			}
+			count = 0;
+			prevlen = curlen;
+			if (nextlen === 0) {
+				max_count = 138;
+				min_count = 3;
+			} else if (curlen == nextlen) {
+				max_count = 6;
+				min_count = 3;
+			} else {
+				max_count = 7;
+				min_count = 4;
+			}
+		}
+	}
+
+	// Send the header for a block using dynamic Huffman trees: the counts, the
+	// lengths of the bit length codes, the literal tree and the distance tree.
+	// IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
+	function send_all_trees(lcodes, dcodes, blcodes) {
+		var rank; // index in bl_order
+
+		send_bits(lcodes - 257, 5); // not +255 as stated in appnote.txt
+		send_bits(dcodes - 1, 5);
+		send_bits(blcodes - 4, 4); // not -3 as stated in appnote.txt
+		for (rank = 0; rank < blcodes; rank++) {
+			send_bits(bl_tree[Tree.bl_order[rank] * 2 + 1], 3);
+		}
+		send_tree(dyn_ltree, lcodes - 1); // literal tree
+		send_tree(dyn_dtree, dcodes - 1); // distance tree
+	}
+
+	// Flush the bit buffer, keeping at most 7 bits in it.
+	function bi_flush() {
+		if (bi_valid == 16) {
+			put_short(bi_buf);
+			bi_buf = 0;
+			bi_valid = 0;
+		} else if (bi_valid >= 8) {
+			put_byte(bi_buf & 0xff);
+			bi_buf >>>= 8;
+			bi_valid -= 8;
+		}
+	}
+
+	// Send one empty static block to give enough lookahead for inflate.
+	// This takes 10 bits, of which 7 may remain in the bit buffer.
+	// The current inflate code requires 9 bits of lookahead. If the
+	// last two codes for the previous block (real code plus EOB) were coded
+	// on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode
+	// the last real code. In this case we send two empty static blocks instead
+	// of one. (There are no problems if the previous block is stored or fixed.)
+	// To simplify the code, we assume the worst case of last real code encoded
+	// on one bit only.
+	function _tr_align() {
+		send_bits(STATIC_TREES << 1, 3);
+		send_code(END_BLOCK, StaticTree.static_ltree);
+
+		bi_flush();
+
+		// Of the 10 bits for the empty block, we have already sent
+		// (10 - bi_valid) bits. The lookahead for the last real code (before
+		// the EOB of the previous block) was thus at least one plus the length
+		// of the EOB plus what we have just sent of the empty static block.
+		if (1 + last_eob_len + 10 - bi_valid < 9) {
+			send_bits(STATIC_TREES << 1, 3);
+			send_code(END_BLOCK, StaticTree.static_ltree);
+			bi_flush();
+		}
+		last_eob_len = 7;
+	}
+
+	// Save the match info and tally the frequency counts. Return true if
+	// the current block must be flushed.
+	function _tr_tally(dist, // distance of matched string
+	lc // match length-MIN_MATCH or unmatched char (if dist==0)
+	) {
+		var out_length, in_length, dcode;
+		that.pending_buf[d_buf + last_lit * 2] = (dist >>> 8) & 0xff;
+		that.pending_buf[d_buf + last_lit * 2 + 1] = dist & 0xff;
+
+		that.pending_buf[l_buf + last_lit] = lc & 0xff;
+		last_lit++;
+
+		if (dist === 0) {
+			// lc is the unmatched char
+			dyn_ltree[lc * 2]++;
+		} else {
+			matches++;
+			// Here, lc is the match length - MIN_MATCH
+			dist--; // dist = match distance - 1
+			dyn_ltree[(Tree._length_code[lc] + LITERALS + 1) * 2]++;
+			dyn_dtree[Tree.d_code(dist) * 2]++;
+		}
+
+		if ((last_lit & 0x1fff) === 0 && level > 2) {
+			// Compute an upper bound for the compressed length
+			out_length = last_lit * 8;
+			in_length = strstart - block_start;
+			for (dcode = 0; dcode < D_CODES; dcode++) {
+				out_length += dyn_dtree[dcode * 2] * (5 + Tree.extra_dbits[dcode]);
+			}
+			out_length >>>= 3;
+			if ((matches < Math.floor(last_lit / 2)) && out_length < Math.floor(in_length / 2))
+				return true;
+		}
+
+		return (last_lit == lit_bufsize - 1);
+		// We avoid equality with lit_bufsize because of wraparound at 64K
+		// on 16 bit machines and because stored blocks are restricted to
+		// 64K-1 bytes.
+	}
+
+	// Send the block data compressed using the given Huffman trees
+	function compress_block(ltree, dtree) {
+		var dist; // distance of matched string
+		var lc; // match length or unmatched char (if dist === 0)
+		var lx = 0; // running index in l_buf
+		var code; // the code to send
+		var extra; // number of extra bits to send
+
+		if (last_lit !== 0) {
+			do {
+				dist = ((that.pending_buf[d_buf + lx * 2] << 8) & 0xff00) | (that.pending_buf[d_buf + lx * 2 + 1] & 0xff);
+				lc = (that.pending_buf[l_buf + lx]) & 0xff;
+				lx++;
+
+				if (dist === 0) {
+					send_code(lc, ltree); // send a literal byte
+				} else {
+					// Here, lc is the match length - MIN_MATCH
+					code = Tree._length_code[lc];
+
+					send_code(code + LITERALS + 1, ltree); // send the length
+					// code
+					extra = Tree.extra_lbits[code];
+					if (extra !== 0) {
+						lc -= Tree.base_length[code];
+						send_bits(lc, extra); // send the extra length bits
+					}
+					dist--; // dist is now the match distance - 1
+					code = Tree.d_code(dist);
+
+					send_code(code, dtree); // send the distance code
+					extra = Tree.extra_dbits[code];
+					if (extra !== 0) {
+						dist -= Tree.base_dist[code];
+						send_bits(dist, extra); // send the extra distance bits
+					}
+				} // literal or match pair ?
+
+				// Check that the overlay between pending_buf and d_buf+l_buf is
+				// ok:
+			} while (lx < last_lit);
+		}
+
+		send_code(END_BLOCK, ltree);
+		last_eob_len = ltree[END_BLOCK * 2 + 1];
+	}
+
+	// Flush the bit buffer and align the output on a byte boundary
+	function bi_windup() {
+		if (bi_valid > 8) {
+			put_short(bi_buf);
+		} else if (bi_valid > 0) {
+			put_byte(bi_buf & 0xff);
+		}
+		bi_buf = 0;
+		bi_valid = 0;
+	}
+
+	// Copy a stored block, storing first the length and its
+	// one's complement if requested.
+	function copy_block(buf, // the input data
+	len, // its length
+	header // true if block header must be written
+	) {
+		bi_windup(); // align on byte boundary
+		last_eob_len = 8; // enough lookahead for inflate
+
+		if (header) {
+			put_short(len);
+			put_short(~len);
+		}
+
+    var USE_AB = !Array.isArray(that.pending_buf);
+    if (USE_AB) {
+		  that.pending_buf.set(window.subarray(buf, buf + len), that.pending);
+		} else {
+		  arraySet(that.pending_buf, window, buf, len, that.pending);
+		}
+		that.pending += len;
+	}
+
+	// Send a stored block
+	function _tr_stored_block(buf, // input block
+	stored_len, // length of input block
+	eof // true if this is the last block for a file
+	) {
+		send_bits((STORED_BLOCK << 1) + (eof ? 1 : 0), 3); // send block type
+		copy_block(buf, stored_len, true); // with header
+	}
+
+	// Determine the best encoding for the current block: dynamic trees, static
+	// trees or store, and output the encoded block to the zip file.
+	function _tr_flush_block(buf, // input block, or NULL if too old
+	stored_len, // length of input block
+	eof // true if this is the last block for a file
+	) {
+		var opt_lenb, static_lenb;// opt_len and static_len in bytes
+		var max_blindex = 0; // index of last bit length code of non zero freq
+
+		// Build the Huffman trees unless a stored block is forced
+		if (level > 0) {
+			// Construct the literal and distance trees
+			l_desc.build_tree(that);
+
+			d_desc.build_tree(that);
+
+			// At this point, opt_len and static_len are the total bit lengths
+			// of
+			// the compressed block data, excluding the tree representations.
+
+			// Build the bit length tree for the above two trees, and get the
+			// index
+			// in bl_order of the last bit length code to send.
+			max_blindex = build_bl_tree();
+
+			// Determine the best encoding. Compute first the block length in
+			// bytes
+			opt_lenb = (that.opt_len + 3 + 7) >>> 3;
+			static_lenb = (that.static_len + 3 + 7) >>> 3;
+
+			if (static_lenb <= opt_lenb)
+				opt_lenb = static_lenb;
+		} else {
+			opt_lenb = static_lenb = stored_len + 5; // force a stored block
+		}
+
+		if ((stored_len + 4 <= opt_lenb) && buf != -1) {
+			// 4: two words for the lengths
+			// The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
+			// Otherwise we can't have processed more than WSIZE input bytes
+			// since
+			// the last block flush, because compression would have been
+			// successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
+			// transform a block into a stored block.
+			_tr_stored_block(buf, stored_len, eof);
+		} else if (static_lenb == opt_lenb) {
+			send_bits((STATIC_TREES << 1) + (eof ? 1 : 0), 3);
+			compress_block(StaticTree.static_ltree, StaticTree.static_dtree);
+		} else {
+			send_bits((DYN_TREES << 1) + (eof ? 1 : 0), 3);
+			send_all_trees(l_desc.max_code + 1, d_desc.max_code + 1, max_blindex + 1);
+			compress_block(dyn_ltree, dyn_dtree);
+		}
+
+		// The above check is made mod 2^32, for files larger than 512 MB
+		// and uLong implemented on 32 bits.
+
+		init_block();
+
+		if (eof) {
+			bi_windup();
+		}
+	}
+
+	function flush_block_only(eof) {
+		_tr_flush_block(block_start >= 0 ? block_start : -1, strstart - block_start, eof);
+		block_start = strstart;
+		strm.flush_pending();
+	}
+
+	// Fill the window when the lookahead becomes insufficient.
+	// Updates strstart and lookahead.
+	//
+	// IN assertion: lookahead < MIN_LOOKAHEAD
+	// OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
+	// At least one byte has been read, or avail_in === 0; reads are
+	// performed for at least two bytes (required for the zip translate_eol
+	// option -- not supported here).
+	function fill_window() {
+		var n, m;
+		var p;
+		var more; // Amount of free space at the end of the window.
+
+		do {
+			more = (window_size - lookahead - strstart);
+
+			// Deal with !@#$% 64K limit:
+			if (more === 0 && strstart === 0 && lookahead === 0) {
+				more = w_size;
+			} else if (more == -1) {
+				// Very unlikely, but possible on 16 bit machine if strstart ==
+				// 0
+				// and lookahead == 1 (input done one byte at time)
+				more--;
+
+				// If the window is almost full and there is insufficient
+				// lookahead,
+				// move the upper half to the lower one to make room in the
+				// upper half.
+			} else if (strstart >= w_size + w_size - MIN_LOOKAHEAD) {
+			  var USE_AB = !Array.isArray(window);
+			  if (USE_AB) {
+  				window.set(window.subarray(w_size, w_size + w_size), 0);
+  			} else {
+  			  arraySet(window, window, w_size, w_size, 0);
+  			}
+
+				match_start -= w_size;
+				strstart -= w_size; // we now have strstart >= MAX_DIST
+				block_start -= w_size;
+
+				// Slide the hash table (could be avoided with 32 bit values
+				// at the expense of memory usage). We slide even when level ==
+				// 0
+				// to keep the hash table consistent if we switch back to level
+				// > 0
+				// later. (Using level 0 permanently is not an optimal usage of
+				// zlib, so we don't care about this pathological case.)
+
+				n = hash_size;
+				p = n;
+				do {
+					m = (head[--p] & 0xffff);
+					head[p] = (m >= w_size ? m - w_size : 0);
+				} while (--n !== 0);
+
+				n = w_size;
+				p = n;
+				do {
+					m = (prev[--p] & 0xffff);
+					prev[p] = (m >= w_size ? m - w_size : 0);
+					// If n is not on any hash chain, prev[n] is garbage but
+					// its value will never be used.
+				} while (--n !== 0);
+				more += w_size;
+			}
+
+			if (strm.avail_in === 0)
+				return;
+
+			// If there was no sliding:
+			// strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
+			// more == window_size - lookahead - strstart
+			// => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
+			// => more >= window_size - 2*WSIZE + 2
+			// In the BIG_MEM or MMAP case (not yet supported),
+			// window_size == input_size + MIN_LOOKAHEAD &&
+			// strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
+			// Otherwise, window_size == 2*WSIZE so more >= 2.
+			// If there was sliding, more >= WSIZE. So in all cases, more >= 2.
+
+			n = strm.read_buf(window, strstart + lookahead, more);
+			lookahead += n;
+
+			// Initialize the hash value now that we have some input:
+			if (lookahead >= MIN_MATCH) {
+				ins_h = window[strstart] & 0xff;
+				ins_h = (((ins_h) << hash_shift) ^ (window[strstart + 1] & 0xff)) & hash_mask;
+			}
+			// If the whole input has less than MIN_MATCH bytes, ins_h is
+			// garbage,
+			// but this is not important since only literal bytes will be
+			// emitted.
+		} while (lookahead < MIN_LOOKAHEAD && strm.avail_in !== 0);
+	}
+
+	// Copy without compression as much as possible from the input stream,
+	// return
+	// the current block state.
+	// This function does not insert new strings in the dictionary since
+	// uncompressible data is probably not useful. This function is used
+	// only for the level=0 compression option.
+	// NOTE: this function should be optimized to avoid extra copying from
+	// window to pending_buf.
+	function deflate_stored(flush) {
+		// Stored blocks are limited to 0xffff bytes, pending_buf is limited
+		// to pending_buf_size, and each stored block has a 5 byte header:
+
+		var max_block_size = 0xffff;
+		var max_start;
+
+		if (max_block_size > pending_buf_size - 5) {
+			max_block_size = pending_buf_size - 5;
+		}
+
+		// Copy as much as possible from input to output:
+		while (true) {
+			// Fill the window as much as possible:
+			if (lookahead <= 1) {
+				fill_window();
+				if (lookahead === 0 && flush == Z_NO_FLUSH)
+					return NeedMore;
+				if (lookahead === 0)
+					break; // flush the current block
+			}
+
+			strstart += lookahead;
+			lookahead = 0;
+
+			// Emit a stored block if pending_buf will be full:
+			max_start = block_start + max_block_size;
+			if (strstart === 0 || strstart >= max_start) {
+				// strstart === 0 is possible when wraparound on 16-bit machine
+				lookahead = (strstart - max_start);
+				strstart = max_start;
+
+				flush_block_only(false);
+				if (strm.avail_out === 0)
+					return NeedMore;
+
+			}
+
+			// Flush if we may have to slide, otherwise block_start may become
+			// negative and the data will be gone:
+			if (strstart - block_start >= w_size - MIN_LOOKAHEAD) {
+				flush_block_only(false);
+				if (strm.avail_out === 0)
+					return NeedMore;
+			}
+		}
+
+		flush_block_only(flush == Z_FINISH);
+		if (strm.avail_out === 0)
+			return (flush == Z_FINISH) ? FinishStarted : NeedMore;
+
+		return flush == Z_FINISH ? FinishDone : BlockDone;
+	}
+
+	function longest_match(cur_match) {
+		var chain_length = max_chain_length; // max hash chain length
+		var scan = strstart; // current string
+		var match; // matched string
+		var len; // length of current match
+		var best_len = prev_length; // best match length so far
+		var limit = strstart > (w_size - MIN_LOOKAHEAD) ? strstart - (w_size - MIN_LOOKAHEAD) : 0;
+		var _nice_match = nice_match;
+
+		// Stop when cur_match becomes <= limit. To simplify the code,
+		// we prevent matches with the string of window index 0.
+
+		var wmask = w_mask;
+
+		var strend = strstart + MAX_MATCH;
+		var scan_end1 = window[scan + best_len - 1];
+		var scan_end = window[scan + best_len];
+
+		// The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of
+		// 16.
+		// It is easy to get rid of this optimization if necessary.
+
+		// Do not waste too much time if we already have a good match:
+		if (prev_length >= good_match) {
+			chain_length >>= 2;
+		}
+
+		// Do not look for matches beyond the end of the input. This is
+		// necessary
+		// to make deflate deterministic.
+		if (_nice_match > lookahead)
+			_nice_match = lookahead;
+
+		do {
+			match = cur_match;
+
+			// Skip to next match if the match length cannot increase
+			// or if the match length is less than 2:
+			if (window[match + best_len] != scan_end || window[match + best_len - 1] != scan_end1 || window[match] != window[scan]
+					|| window[++match] != window[scan + 1])
+				continue;
+
+			// The check at best_len-1 can be removed because it will be made
+			// again later. (This heuristic is not always a win.)
+			// It is not necessary to compare scan[2] and match[2] since they
+			// are always equal when the other bytes match, given that
+			// the hash keys are equal and that HASH_BITS >= 8.
+			scan += 2;
+			match++;
+
+			// We check for insufficient lookahead only every 8th comparison;
+			// the 256th check will be made at strstart+258.
+			do {
+			} while (window[++scan] == window[++match] && window[++scan] == window[++match] && window[++scan] == window[++match]
+					&& window[++scan] == window[++match] && window[++scan] == window[++match] && window[++scan] == window[++match]
+					&& window[++scan] == window[++match] && window[++scan] == window[++match] && scan < strend);
+
+			len = MAX_MATCH - (strend - scan);
+			scan = strend - MAX_MATCH;
+
+			if (len > best_len) {
+				match_start = cur_match;
+				best_len = len;
+				if (len >= _nice_match)
+					break;
+				scan_end1 = window[scan + best_len - 1];
+				scan_end = window[scan + best_len];
+			}
+
+		} while ((cur_match = (prev[cur_match & wmask] & 0xffff)) > limit && --chain_length !== 0);
+
+		if (best_len <= lookahead)
+			return best_len;
+		return lookahead;
+	}
+
+	// Compress as much as possible from the input stream, return the current
+	// block state.
+	// This function does not perform lazy evaluation of matches and inserts
+	// new strings in the dictionary only for unmatched strings or for short
+	// matches. It is used only for the fast compression options.
+	function deflate_fast(flush) {
+		// short hash_head = 0; // head of the hash chain
+		var hash_head = 0; // head of the hash chain
+		var bflush; // set if current block must be flushed
+
+		while (true) {
+			// Make sure that we always have enough lookahead, except
+			// at the end of the input file. We need MAX_MATCH bytes
+			// for the next match, plus MIN_MATCH bytes to insert the
+			// string following the next match.
+			if (lookahead < MIN_LOOKAHEAD) {
+				fill_window();
+				if (lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+					return NeedMore;
+				}
+				if (lookahead === 0)
+					break; // flush the current block
+			}
+
+			// Insert the string window[strstart .. strstart+2] in the
+			// dictionary, and set hash_head to the head of the hash chain:
+			if (lookahead >= MIN_MATCH) {
+				ins_h = (((ins_h) << hash_shift) ^ (window[(strstart) + (MIN_MATCH - 1)] & 0xff)) & hash_mask;
+
+				// prev[strstart&w_mask]=hash_head=head[ins_h];
+				hash_head = (head[ins_h] & 0xffff);
+				prev[strstart & w_mask] = head[ins_h];
+				head[ins_h] = strstart;
+			}
+
+			// Find the longest match, discarding those <= prev_length.
+			// At this point we have always match_length < MIN_MATCH
+
+			if (hash_head !== 0 && ((strstart - hash_head) & 0xffff) <= w_size - MIN_LOOKAHEAD) {
+				// To simplify the code, we prevent matches with the string
+				// of window index 0 (in particular we have to avoid a match
+				// of the string with itself at the start of the input file).
+				if (strategy != Z_HUFFMAN_ONLY) {
+					match_length = longest_match(hash_head);
+				}
+				// longest_match() sets match_start
+			}
+			if (match_length >= MIN_MATCH) {
+				// check_match(strstart, match_start, match_length);
+
+				bflush = _tr_tally(strstart - match_start, match_length - MIN_MATCH);
+
+				lookahead -= match_length;
+
+				// Insert new strings in the hash table only if the match length
+				// is not too large. This saves time but degrades compression.
+				if (match_length <= max_lazy_match && lookahead >= MIN_MATCH) {
+					match_length--; // string at strstart already in hash table
+					do {
+						strstart++;
+
+						ins_h = ((ins_h << hash_shift) ^ (window[(strstart) + (MIN_MATCH - 1)] & 0xff)) & hash_mask;
+						// prev[strstart&w_mask]=hash_head=head[ins_h];
+						hash_head = (head[ins_h] & 0xffff);
+						prev[strstart & w_mask] = head[ins_h];
+						head[ins_h] = strstart;
+
+						// strstart never exceeds WSIZE-MAX_MATCH, so there are
+						// always MIN_MATCH bytes ahead.
+					} while (--match_length !== 0);
+					strstart++;
+				} else {
+					strstart += match_length;
+					match_length = 0;
+					ins_h = window[strstart] & 0xff;
+
+					ins_h = (((ins_h) << hash_shift) ^ (window[strstart + 1] & 0xff)) & hash_mask;
+					// If lookahead < MIN_MATCH, ins_h is garbage, but it does
+					// not
+					// matter since it will be recomputed at next deflate call.
+				}
+			} else {
+				// No match, output a literal byte
+
+				bflush = _tr_tally(0, window[strstart] & 0xff);
+				lookahead--;
+				strstart++;
+			}
+			if (bflush) {
+
+				flush_block_only(false);
+				if (strm.avail_out === 0)
+					return NeedMore;
+			}
+		}
+
+		flush_block_only(flush == Z_FINISH);
+		if (strm.avail_out === 0) {
+			if (flush == Z_FINISH)
+				return FinishStarted;
+			else
+				return NeedMore;
+		}
+		return flush == Z_FINISH ? FinishDone : BlockDone;
+	}
+
+	// Same as above, but achieves better compression. We use a lazy
+	// evaluation for matches: a match is finally adopted only if there is
+	// no better match at the next window position.
+	function deflate_slow(flush) {
+		// short hash_head = 0; // head of hash chain
+		var hash_head = 0; // head of hash chain
+		var bflush; // set if current block must be flushed
+		var max_insert;
+
+		// Process the input block.
+		while (true) {
+			// Make sure that we always have enough lookahead, except
+			// at the end of the input file. We need MAX_MATCH bytes
+			// for the next match, plus MIN_MATCH bytes to insert the
+			// string following the next match.
+
+			if (lookahead < MIN_LOOKAHEAD) {
+				fill_window();
+				if (lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+					return NeedMore;
+				}
+				if (lookahead === 0)
+					break; // flush the current block
+			}
+
+			// Insert the string window[strstart .. strstart+2] in the
+			// dictionary, and set hash_head to the head of the hash chain:
+
+			if (lookahead >= MIN_MATCH) {
+				ins_h = (((ins_h) << hash_shift) ^ (window[(strstart) + (MIN_MATCH - 1)] & 0xff)) & hash_mask;
+				// prev[strstart&w_mask]=hash_head=head[ins_h];
+				hash_head = (head[ins_h] & 0xffff);
+				prev[strstart & w_mask] = head[ins_h];
+				head[ins_h] = strstart;
+			}
+
+			// Find the longest match, discarding those <= prev_length.
+			prev_length = match_length;
+			prev_match = match_start;
+			match_length = MIN_MATCH - 1;
+
+			if (hash_head !== 0 && prev_length < max_lazy_match && ((strstart - hash_head) & 0xffff) <= w_size - MIN_LOOKAHEAD) {
+				// To simplify the code, we prevent matches with the string
+				// of window index 0 (in particular we have to avoid a match
+				// of the string with itself at the start of the input file).
+
+				if (strategy != Z_HUFFMAN_ONLY) {
+					match_length = longest_match(hash_head);
+				}
+				// longest_match() sets match_start
+
+				if (match_length <= 5 && (strategy == Z_FILTERED || (match_length == MIN_MATCH && strstart - match_start > 4096))) {
+
+					// If prev_match is also MIN_MATCH, match_start is garbage
+					// but we will ignore the current match anyway.
+					match_length = MIN_MATCH - 1;
+				}
+			}
+
+			// If there was a match at the previous step and the current
+			// match is not better, output the previous match:
+			if (prev_length >= MIN_MATCH && match_length <= prev_length) {
+				max_insert = strstart + lookahead - MIN_MATCH;
+				// Do not insert strings in hash table beyond this.
+
+				// check_match(strstart-1, prev_match, prev_length);
+
+				bflush = _tr_tally(strstart - 1 - prev_match, prev_length - MIN_MATCH);
+
+				// Insert in hash table all strings up to the end of the match.
+				// strstart-1 and strstart are already inserted. If there is not
+				// enough lookahead, the last two strings are not inserted in
+				// the hash table.
+				lookahead -= prev_length - 1;
+				prev_length -= 2;
+				do {
+					if (++strstart <= max_insert) {
+						ins_h = (((ins_h) << hash_shift) ^ (window[(strstart) + (MIN_MATCH - 1)] & 0xff)) & hash_mask;
+						// prev[strstart&w_mask]=hash_head=head[ins_h];
+						hash_head = (head[ins_h] & 0xffff);
+						prev[strstart & w_mask] = head[ins_h];
+						head[ins_h] = strstart;
+					}
+				} while (--prev_length !== 0);
+				match_available = 0;
+				match_length = MIN_MATCH - 1;
+				strstart++;
+
+				if (bflush) {
+					flush_block_only(false);
+					if (strm.avail_out === 0)
+						return NeedMore;
+				}
+			} else if (match_available !== 0) {
+
+				// If there was no match at the previous position, output a
+				// single literal. If there was a match but the current match
+				// is longer, truncate the previous match to a single literal.
+
+				bflush = _tr_tally(0, window[strstart - 1] & 0xff);
+
+				if (bflush) {
+					flush_block_only(false);
+				}
+				strstart++;
+				lookahead--;
+				if (strm.avail_out === 0)
+					return NeedMore;
+			} else {
+				// There is no previous match to compare with, wait for
+				// the next step to decide.
+
+				match_available = 1;
+				strstart++;
+				lookahead--;
+			}
+		}
+
+		if (match_available !== 0) {
+			bflush = _tr_tally(0, window[strstart - 1] & 0xff);
+			match_available = 0;
+		}
+		flush_block_only(flush == Z_FINISH);
+
+		if (strm.avail_out === 0) {
+			if (flush == Z_FINISH)
+				return FinishStarted;
+			else
+				return NeedMore;
+		}
+
+		return flush == Z_FINISH ? FinishDone : BlockDone;
+	}
+
+	function deflateReset(strm) {
+		strm.total_in = strm.total_out = 0;
+		strm.msg = null; //
+		
+		that.pending = 0;
+		that.pending_out = 0;
+
+		status = BUSY_STATE;
+
+		last_flush = Z_NO_FLUSH;
+
+		tr_init();
+		lm_init();
+		return Z_OK;
+	}
+
+	that.deflateInit = function(strm, _level, bits, _method, memLevel, _strategy) {
+		if (!_method)
+			_method = Z_DEFLATED;
+		if (!memLevel)
+			memLevel = DEF_MEM_LEVEL;
+		if (!_strategy)
+			_strategy = Z_DEFAULT_STRATEGY;
+
+		// byte[] my_version=ZLIB_VERSION;
+
+		//
+		// if (!version || version[0] != my_version[0]
+		// || stream_size != sizeof(z_stream)) {
+		// return Z_VERSION_ERROR;
+		// }
+
+		strm.msg = null;
+
+		if (_level == Z_DEFAULT_COMPRESSION)
+			_level = 6;
+
+		if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || _method != Z_DEFLATED || bits < 9 || bits > 15 || _level < 0 || _level > 9 || _strategy < 0
+				|| _strategy > Z_HUFFMAN_ONLY) {
+			return Z_STREAM_ERROR;
+		}
+
+		strm.dstate = that;
+
+		w_bits = bits;
+		w_size = 1 << w_bits;
+		w_mask = w_size - 1;
+
+		hash_bits = memLevel + 7;
+		hash_size = 1 << hash_bits;
+		hash_mask = hash_size - 1;
+		hash_shift = Math.floor((hash_bits + MIN_MATCH - 1) / MIN_MATCH);
+
+		window = CAN_AB ? new Uint8Array(w_size * 2) : new Array(w_size * 2);
+		prev = [];
+		head = [];
+
+		lit_bufsize = 1 << (memLevel + 6); // 16K elements by default
+
+		// We overlay pending_buf and d_buf+l_buf. This works since the average
+		// output size for (length,distance) codes is <= 24 bits.
+		that.pending_buf = CAN_AB ? new Uint8Array(lit_bufsize * 4) : new Array(lit_bufsize * 4);
+		pending_buf_size = lit_bufsize * 4;
+
+		d_buf = Math.floor(lit_bufsize / 2);
+		l_buf = (1 + 2) * lit_bufsize;
+
+		level = _level;
+
+		strategy = _strategy;
+		method = _method & 0xff;
+
+		return deflateReset(strm);
+	};
+
+	that.deflateEnd = function() {
+		if (status != INIT_STATE && status != BUSY_STATE && status != FINISH_STATE) {
+			return Z_STREAM_ERROR;
+		}
+		// Deallocate in reverse order of allocations:
+		that.pending_buf = null;
+		head = null;
+		prev = null;
+		window = null;
+		// free
+		that.dstate = null;
+		return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
+	};
+
+	that.deflateParams = function(strm, _level, _strategy) {
+		var err = Z_OK;
+
+		if (_level == Z_DEFAULT_COMPRESSION) {
+			_level = 6;
+		}
+		if (_level < 0 || _level > 9 || _strategy < 0 || _strategy > Z_HUFFMAN_ONLY) {
+			return Z_STREAM_ERROR;
+		}
+
+		if (config_table[level].func != config_table[_level].func && strm.total_in !== 0) {
+			// Flush the last buffer:
+			err = strm.deflate(Z_PARTIAL_FLUSH);
+		}
+
+		if (level != _level) {
+			level = _level;
+			max_lazy_match = config_table[level].max_lazy;
+			good_match = config_table[level].good_length;
+			nice_match = config_table[level].nice_length;
+			max_chain_length = config_table[level].max_chain;
+		}
+		strategy = _strategy;
+		return err;
+	};
+
+	that.deflateSetDictionary = function(strm, dictionary, dictLength) {
+		var length = dictLength;
+		var n, index = 0;
+
+		if (!dictionary || status != INIT_STATE)
+			return Z_STREAM_ERROR;
+
+		if (length < MIN_MATCH)
+			return Z_OK;
+		if (length > w_size - MIN_LOOKAHEAD) {
+			length = w_size - MIN_LOOKAHEAD;
+			index = dictLength - length; // use the tail of the dictionary
+		}
+		
+		var USE_AB = !Array.isArray(window);
+
+    if (USE_AB) {
+  		window.set(dictionary.subarray(index, index + length), 0);
+  	} else {
+  	  arraySet(window, dictionary, index, length, 0);
+  	}
+
+		strstart = length;
+		block_start = length;
+
+		// Insert all strings in the hash table (except for the last two bytes).
+		// s->lookahead stays null, so s->ins_h will be recomputed at the next
+		// call of fill_window.
+
+		ins_h = window[0] & 0xff;
+		ins_h = (((ins_h) << hash_shift) ^ (window[1] & 0xff)) & hash_mask;
+
+		for (n = 0; n <= length - MIN_MATCH; n++) {
+			ins_h = (((ins_h) << hash_shift) ^ (window[(n) + (MIN_MATCH - 1)] & 0xff)) & hash_mask;
+			prev[n & w_mask] = head[ins_h];
+			head[ins_h] = n;
+		}
+		return Z_OK;
+	};
+
+	that.deflate = function(_strm, flush) {
+		var i, header, level_flags, old_flush, bstate;
+
+		if (flush > Z_FINISH || flush < 0) {
+			return Z_STREAM_ERROR;
+		}
+
+		if (!_strm.next_out || (!_strm.next_in && _strm.avail_in !== 0) || (status == FINISH_STATE && flush != Z_FINISH)) {
+			_strm.msg = z_errmsg[Z_NEED_DICT - (Z_STREAM_ERROR)];
+			return Z_STREAM_ERROR;
+		}
+		if (_strm.avail_out === 0) {
+			_strm.msg = z_errmsg[Z_NEED_DICT - (Z_BUF_ERROR)];
+			return Z_BUF_ERROR;
+		}
+
+		strm = _strm; // just in case
+		old_flush = last_flush;
+		last_flush = flush;
+
+		// Write the zlib header
+		if (status == INIT_STATE) {
+			header = (Z_DEFLATED + ((w_bits - 8) << 4)) << 8;
+			level_flags = ((level - 1) & 0xff) >> 1;
+
+			if (level_flags > 3)
+				level_flags = 3;
+			header |= (level_flags << 6);
+			if (strstart !== 0)
+				header |= PRESET_DICT;
+			header += 31 - (header % 31);
+
+			status = BUSY_STATE;
+			putShortMSB(header);
+		}
+
+		// Flush as much pending output as possible
+		if (that.pending !== 0) {
+			strm.flush_pending();
+			if (strm.avail_out === 0) {
+				// console.log(" avail_out==0");
+				// Since avail_out is 0, deflate will be called again with
+				// more output space, but possibly with both pending and
+				// avail_in equal to zero. There won't be anything to do,
+				// but this is not an error situation so make sure we
+				// return OK instead of BUF_ERROR at next call of deflate:
+				last_flush = -1;
+				return Z_OK;
+			}
+
+			// Make sure there is something to do and avoid duplicate
+			// consecutive
+			// flushes. For repeated and useless calls with Z_FINISH, we keep
+			// returning Z_STREAM_END instead of Z_BUFF_ERROR.
+		} else if (strm.avail_in === 0 && flush <= old_flush && flush != Z_FINISH) {
+			strm.msg = z_errmsg[Z_NEED_DICT - (Z_BUF_ERROR)];
+			return Z_BUF_ERROR;
+		}
+
+		// User must not provide more input after the first FINISH:
+		if (status == FINISH_STATE && strm.avail_in !== 0) {
+			_strm.msg = z_errmsg[Z_NEED_DICT - (Z_BUF_ERROR)];
+			return Z_BUF_ERROR;
+		}
+
+		// Start a new block or continue the current one.
+		if (strm.avail_in !== 0 || lookahead !== 0 || (flush != Z_NO_FLUSH && status != FINISH_STATE)) {
+			bstate = -1;
+			switch (config_table[level].func) {
+			case STORED:
+				bstate = deflate_stored(flush);
+				break;
+			case FAST:
+				bstate = deflate_fast(flush);
+				break;
+			case SLOW:
+				bstate = deflate_slow(flush);
+				break;
+			default:
+			}
+
+			if (bstate == FinishStarted || bstate == FinishDone) {
+				status = FINISH_STATE;
+			}
+			if (bstate == NeedMore || bstate == FinishStarted) {
+				if (strm.avail_out === 0) {
+					last_flush = -1; // avoid BUF_ERROR next call, see above
+				}
+				return Z_OK;
+				// If flush != Z_NO_FLUSH && avail_out === 0, the next call
+				// of deflate should use the same flush parameter to make sure
+				// that the flush is complete. So we don't have to output an
+				// empty block here, this will be done at next call. This also
+				// ensures that for a very small output buffer, we emit at most
+				// one empty block.
+			}
+
+			if (bstate == BlockDone) {
+				if (flush == Z_PARTIAL_FLUSH) {
+					_tr_align();
+				} else { // FULL_FLUSH or SYNC_FLUSH
+					_tr_stored_block(0, 0, false);
+					// For a full flush, this empty block will be recognized
+					// as a special marker by inflate_sync().
+					if (flush == Z_FULL_FLUSH) {
+						// state.head[s.hash_size-1]=0;
+						for (i = 0; i < hash_size/*-1*/; i++)
+							// forget history
+							head[i] = 0;
+					}
+				}
+				strm.flush_pending();
+				if (strm.avail_out === 0) {
+					last_flush = -1; // avoid BUF_ERROR at next call, see above
+					return Z_OK;
+				}
+			}
+		}
+
+		if (flush != Z_FINISH)
+			return Z_OK;
+		return Z_STREAM_END;
+	};
+}
+
+// ZStream
+
+function ZStream() {
+	var that = this;
+	that.next_in_index = 0;
+	that.next_out_index = 0;
+	// that.next_in; // next input byte
+	that.avail_in = 0; // number of bytes available at next_in
+	that.total_in = 0; // total nb of input bytes read so far
+	// that.next_out; // next output byte should be put there
+	that.avail_out = 0; // remaining free space at next_out
+	that.total_out = 0; // total nb of bytes output so far
+	// that.msg;
+	// that.dstate;
+}
+
+ZStream.prototype = {
+	deflateInit : function(level, bits) {
+		var that = this;
+		that.dstate = new Deflate();
+		if (!bits)
+			bits = MAX_BITS;
+		return that.dstate.deflateInit(that, level, bits);
+	},
+
+	deflate : function(flush) {
+		var that = this;
+		if (!that.dstate) {
+			return Z_STREAM_ERROR;
+		}
+		return that.dstate.deflate(that, flush);
+	},
+
+	deflateEnd : function() {
+		var that = this;
+		if (!that.dstate)
+			return Z_STREAM_ERROR;
+		var ret = that.dstate.deflateEnd();
+		that.dstate = null;
+		return ret;
+	},
+
+	deflateParams : function(level, strategy) {
+		var that = this;
+		if (!that.dstate)
+			return Z_STREAM_ERROR;
+		return that.dstate.deflateParams(that, level, strategy);
+	},
+
+	deflateSetDictionary : function(dictionary, dictLength) {
+		var that = this;
+		if (!that.dstate)
+			return Z_STREAM_ERROR;
+		return that.dstate.deflateSetDictionary(that, dictionary, dictLength);
+	},
+
+	// Read a new buffer from the current input stream, update the
+	// total number of bytes read. All deflate() input goes through
+	// this function so some applications may wish to modify it to avoid
+	// allocating a large strm->next_in buffer and copying from it.
+	// (See also flush_pending()).
+	read_buf : function(buf, start, size) {
+ 		var that = this;
+		var len = that.avail_in;
+		if (len > size)
+			len = size;
+		if (len === 0)
+			return 0;
+		that.avail_in -= len;
+
+    var USE_AB = !Array.isArray(that.next_in);
+
+    if (USE_AB) {
+    	buf.set(that.next_in.subarray(that.next_in_index, that.next_in_index + len), start);
+    } else {
+      arraySet(buf, that.next_in, that.next_in_index, len, start);
+    }
+
+		that.next_in_index += len;
+		that.total_in += len;
+		return len;
+	},
+
+	// Flush as much pending output as possible. All deflate() output goes
+	// through this function so some applications may wish to modify it
+	// to avoid allocating a large strm->next_out buffer and copying into it.
+	// (See also read_buf()).
+	flush_pending : function() {
+		var that = this;
+		var len = that.dstate.pending;
+
+		if (len > that.avail_out)
+			len = that.avail_out;
+		if (len === 0)
+			return;
+
+		// if (that.dstate.pending_buf.length <= that.dstate.pending_out || that.next_out.length <= that.next_out_index
+		// || that.dstate.pending_buf.length < (that.dstate.pending_out + len) || that.next_out.length < (that.next_out_index +
+		// len)) {
+		// console.log(that.dstate.pending_buf.length + ", " + that.dstate.pending_out + ", " + that.next_out.length + ", " +
+		// that.next_out_index + ", " + len);
+		// console.log("avail_out=" + that.avail_out);
+		// }
+    var USE_AB = !Array.isArray(that.next_out);
+
+    if (USE_AB) {
+      that.next_out.set(that.dstate.pending_buf.subarray(that.dstate.pending_out, that.dstate.pending_out + len), that.next_out_index);
+    } else {
+      arraySet(that.next_out, that.dstate.pending_buf, that.dstate.pending_out, len, that.next_out_index);
+    }
+
+		that.next_out_index += len;
+		that.dstate.pending_out += len;
+		that.total_out += len;
+		that.avail_out -= len;
+		that.dstate.pending -= len;
+		if (that.dstate.pending === 0) {
+			that.dstate.pending_out = 0;
+		}
+	}
+};
+
+////////////////////////////////////////////////////////////////////////////////
+// Customized code
+function arraySet(dest, src, src_offs, len, dest_offs) {
+  for(var i=0; i<len; i++) {
+    dest[dest_offs + i] = src[src_offs + i];
+  }
+}
+
+
+function adler32(array) {
+    return adler32_update(1, array);
+}
+
+function adler32_update(adler, array) {
+    var s1 = adler & 0xffff,
+        s2 = (adler >>> 16) & 0xffff;
+    var len = array.length;
+    var tlen;
+    var i = 0;
+
+    while (len > 0) {
+      // 1024 - optimization constant
+      tlen = len > 1024 ? 1024 : len;
+      len -= tlen;
+      do {
+        s1 += array[i++];
+        s2 += s1;
+      } while (--tlen);
+
+      s1 %= 65521;
+      s2 %= 65521;
+    }
+
+    return ((s2 << 16) | s1) >>> 0;
+}
+
+function deflate(data, level) {
+  var USE_AB = !Array.isArray(data);
+
+	var z = new ZStream();
+
+	var bufsize = 1024;
+	var buf = USE_AB ? new Uint8Array(bufsize) : new Array(bufsize);
+
+	if (typeof level == "undefined")
+		level = Z_DEFAULT_COMPRESSION;
+
+	z.deflateInit(level);
+	z.next_out = buf;
+
+	var err, buffers = [], bufferIndex = 0, bufferSize = 0, array;
+
+	if (!data.length)
+		return;
+
+	z.next_in_index = 0;
+	z.next_in = data;
+	z.avail_in = data.length;
+
+  // push data 
+	do {
+		z.next_out_index = 0;
+		z.avail_out = bufsize;
+
+		err = z.deflate(Z_NO_FLUSH);
+
+		if (err != Z_OK) { throw "deflating: " + z.msg; }
+
+		if (z.next_out_index) {
+			if (z.next_out_index == bufsize) {
+				buffers.push(USE_AB ? new Uint8Array(buf) : buf.slice());
+			} else {
+				buffers.push(USE_AB ?
+				  new Uint8Array(buf.subarray(0, z.next_out_index))
+				  :
+				  buf.slice(0, z.next_out_index)				  
+				);
+			}
+    }
+
+		bufferSize += z.next_out_index;
+
+	} while (z.avail_in > 0 || z.avail_out === 0);
+
+  // Finalize deflate, flush internal buffers
+	do {
+		z.next_out_index = 0;
+		z.avail_out = bufsize;
+
+		err = z.deflate(Z_FINISH);
+
+		if (err != Z_STREAM_END && err != Z_OK) { throw "deflating: " + z.msg; }
+
+		if (bufsize - z.avail_out > 0) {
+			buffers.push(USE_AB ?
+			  new Uint8Array(buf.subarray(0, z.next_out_index))
+			  :
+			  buf.slice(0, z.next_out_index)
+		  );
+		}
+
+		bufferSize += z.next_out_index;
+
+	} while (z.avail_in > 0 || z.avail_out === 0);
+
+	z.deflateEnd();
+
+  // Final rezult = (2-bytes header) + (raw data) + (4 byte Adler32)
+	var result = USE_AB ? new Uint8Array(bufferSize + 6) : new Array(bufferSize + 6);
+
+  // FIXME: use proper constants
+  var cmf = (7 << 4) | 8;
+  var fdict = 0;
+  var flg = (2 << 6) | (fdict << 5);
+  var fcheck = 31 - (cmf * 256 + flg) % 31;
+  flg |= fcheck;  
+
+  result[bufferIndex++] = cmf;
+  result[bufferIndex++] = flg;
+	
+	buffers.forEach(function(chunk) {
+	  if (USE_AB) {
+  		result.set(chunk, bufferIndex);
+	  } else {
+	    arraySet(result, chunk, 0, chunk.length, bufferIndex);
+	  }
+		bufferIndex += chunk.length;
+	});
+
+  var adler = adler32(data);
+
+  result[bufferIndex++] = (adler >> 24) & 0xff;
+  result[bufferIndex++] = (adler >> 16) & 0xff;
+  result[bufferIndex++] = (adler >> 8) & 0xff;
+  result[bufferIndex++] = adler & 0xff;
+  
+	return result;
+}
+
+module.exports = deflate;
+