smartmachine 1.2.2 → 1.3.0

data/lib/smart_machine/templates/dotsmartmachine/config/emailer/etc/dovecot/conf.d/10-mail.conf

@@ -0,0 +1,427 @@
+##
+## Mailbox locations and namespaces
+##
+
+# Location for users' mailboxes. The default is empty, which means that Dovecot
+# tries to find the mailboxes automatically. This won't work if the user
+# doesn't yet have any mail, so you should explicitly tell Dovecot the full
+# location.
+#
+# If you're using mbox, giving a path to the INBOX file (eg. /var/mail/%u)
+# isn't enough. You'll also need to tell Dovecot where the other mailboxes are
+# kept. This is called the "root mail directory", and it must be the first
+# path given in the mail_location setting.
+#
+# There are a few special variables you can use, eg.:
+#
+#   %u - username
+#   %n - user part in user@domain, same as %u if there's no domain
+#   %d - domain part in user@domain, empty if there's no domain
+#   %h - home directory
+#
+# See doc/wiki/Variables.txt for full list. Some examples:
+#
+#   mail_location = maildir:~/Maildir
+#   mail_location = mbox:~/mail:INBOX=/var/mail/%u
+#   mail_location = mbox:/var/mail/%d/%1n/%n:INDEX=/var/indexes/%d/%1n/%n
+#
+# <doc/wiki/MailLocation.txt>
+#
+##### SmartMachine Begin.
+#mail_location = mbox:~/mail:INBOX=/var/mail/%u
+mail_location = maildir:~/Maildir
+##### SmartMachine Close.
+
+# If you need to set multiple mailbox locations or want to change default
+# namespace settings, you can do it by defining namespace sections.
+#
+# You can have private, shared and public namespaces. Private namespaces
+# are for user's personal mails. Shared namespaces are for accessing other
+# users' mailboxes that have been shared. Public namespaces are for shared
+# mailboxes that are managed by sysadmin. If you create any shared or public
+# namespaces you'll typically want to enable ACL plugin also, otherwise all
+# users can access all the shared mailboxes, assuming they have permissions
+# on filesystem level to do so.
+namespace inbox {
+  # Namespace type: private, shared or public
+  #type = private
+
+  # Hierarchy separator to use. You should use the same separator for all
+  # namespaces or some clients get confused. '/' is usually a good one.
+  # The default however depends on the underlying mail storage format.
+  #separator = 
+
+  # Prefix required to access this namespace. This needs to be different for
+  # all namespaces. For example "Public/".
+  #prefix = 
+
+  # Physical location of the mailbox. This is in same format as
+  # mail_location, which is also the default for it.
+  #location =
+
+  # There can be only one INBOX, and this setting defines which namespace
+  # has it.
+  inbox = yes
+
+  # If namespace is hidden, it's not advertised to clients via NAMESPACE
+  # extension. You'll most likely also want to set list=no. This is mostly
+  # useful when converting from another server with different namespaces which
+  # you want to deprecate but still keep working. For example you can create
+  # hidden namespaces with prefixes "~/mail/", "~%u/mail/" and "mail/".
+  #hidden = no
+
+  # Show the mailboxes under this namespace with LIST command. This makes the
+  # namespace visible for clients that don't support NAMESPACE extension.
+  # "children" value lists child mailboxes, but hides the namespace prefix.
+  #list = yes
+
+  # Namespace handles its own subscriptions. If set to "no", the parent
+  # namespace handles them (empty prefix should always have this as "yes")
+  #subscriptions = yes
+
+  # See 15-mailboxes.conf for definitions of special mailboxes.
+}
+
+# Example shared namespace configuration
+#namespace {
+  #type = shared
+  #separator = /
+
+  # Mailboxes are visible under "shared/user@domain/"
+  # %%n, %%d and %%u are expanded to the destination user.
+  #prefix = shared/%%u/
+
+  # Mail location for other users' mailboxes. Note that %variables and ~/
+  # expands to the logged in user's data. %%n, %%d, %%u and %%h expand to the
+  # destination user's data.
+  #location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u
+
+  # Use the default namespace for saving subscriptions.
+  #subscriptions = no
+
+  # List the shared/ namespace only if there are visible shared mailboxes.
+  #list = children
+#}
+# Should shared INBOX be visible as "shared/user" or "shared/user/INBOX"?
+#mail_shared_explicit_inbox = no
+
+# System user and group used to access mails. If you use multiple, userdb
+# can override these by returning uid or gid fields. You can use either numbers
+# or names. <doc/wiki/UserIds.txt>
+#mail_uid =
+#mail_gid =
+
+# Group to enable temporarily for privileged operations. Currently this is
+# used only with INBOX when either its initial creation or dotlocking fails.
+# Typically this is set to "mail" to give access to /var/mail.
+mail_privileged_group = mail
+
+# Grant access to these supplementary groups for mail processes. Typically
+# these are used to set up access to shared mailboxes. Note that it may be
+# dangerous to set these if users can create symlinks (e.g. if "mail" group is
+# set here, ln -s /var/mail ~/mail/var could allow a user to delete others'
+# mailboxes, or ln -s /secret/shared/box ~/mail/mybox would allow reading it).
+#mail_access_groups =
+
+# Allow full filesystem access to clients. There's no access checks other than
+# what the operating system does for the active UID/GID. It works with both
+# maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/
+# or ~user/.
+#mail_full_filesystem_access = no
+
+# Dictionary for key=value mailbox attributes. This is used for example by
+# URLAUTH and METADATA extensions.
+#mail_attribute_dict =
+
+# A comment or note that is associated with the server. This value is
+# accessible for authenticated users through the IMAP METADATA server
+# entry "/shared/comment". 
+#mail_server_comment = ""
+
+# Indicates a method for contacting the server administrator. According to
+# RFC 5464, this value MUST be a URI (e.g., a mailto: or tel: URL), but that
+# is currently not enforced. Use for example mailto:admin@example.com. This
+# value is accessible for authenticated users through the IMAP METADATA server
+# entry "/shared/admin".
+#mail_server_admin = 
+
+##
+## Mail processes
+##
+
+# Don't use mmap() at all. This is required if you store indexes to shared
+# filesystems (NFS or clustered filesystem).
+#mmap_disable = no
+
+# Rely on O_EXCL to work when creating dotlock files. NFS supports O_EXCL
+# since version 3, so this should be safe to use nowadays by default.
+#dotlock_use_excl = yes
+
+# When to use fsync() or fdatasync() calls:
+#   optimized (default): Whenever necessary to avoid losing important data
+#   always: Useful with e.g. NFS when write()s are delayed
+#   never: Never use it (best performance, but crashes can lose data)
+#mail_fsync = optimized
+
+# Locking method for index files. Alternatives are fcntl, flock and dotlock.
+# Dotlocking uses some tricks which may create more disk I/O than other locking
+# methods. NFS users: flock doesn't work, remember to change mmap_disable.
+#lock_method = fcntl
+
+# Directory where mails can be temporarily stored. Usually it's used only for
+# mails larger than >= 128 kB. It's used by various parts of Dovecot, for
+# example LDA/LMTP while delivering large mails or zlib plugin for keeping
+# uncompressed mails.
+#mail_temp_dir = /tmp
+
+# Valid UID range for users, defaults to 500 and above. This is mostly
+# to make sure that users can't log in as daemons or other system users.
+# Note that denying root logins is hardcoded to dovecot binary and can't
+# be done even if first_valid_uid is set to 0.
+#first_valid_uid = 500
+#last_valid_uid = 0
+
+# Valid GID range for users, defaults to non-root/wheel. Users having
+# non-valid GID as primary group ID aren't allowed to log in. If user
+# belongs to supplementary groups with non-valid GIDs, those groups are
+# not set.
+#first_valid_gid = 1
+#last_valid_gid = 0
+
+# Maximum allowed length for mail keyword name. It's only forced when trying
+# to create new keywords.
+#mail_max_keyword_length = 50
+
+# ':' separated list of directories under which chrooting is allowed for mail
+# processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too).
+# This setting doesn't affect login_chroot, mail_chroot or auth chroot
+# settings. If this setting is empty, "/./" in home dirs are ignored.
+# WARNING: Never add directories here which local users can modify, that
+# may lead to root exploit. Usually this should be done only if you don't
+# allow shell access for users. <doc/wiki/Chrooting.txt>
+#valid_chroot_dirs = 
+
+# Default chroot directory for mail processes. This can be overridden for
+# specific users in user database by giving /./ in user's home directory
+# (eg. /home/./user chroots into /home). Note that usually there is no real
+# need to do chrooting, Dovecot doesn't allow users to access files outside
+# their mail directory anyway. If your home directories are prefixed with
+# the chroot directory, append "/." to mail_chroot. <doc/wiki/Chrooting.txt>
+#mail_chroot = 
+
+# UNIX socket path to master authentication server to find users.
+# This is used by imap (for shared users) and lda.
+#auth_socket_path = /var/run/dovecot/auth-userdb
+
+# Directory where to look up mail plugins.
+#mail_plugin_dir = /usr/lib/dovecot/modules
+
+# Space separated list of plugins to load for all services. Plugins specific to
+# IMAP, LDA, etc. are added to this list in their own .conf files.
+#mail_plugins = 
+##### SmartMachine Begin.
+mail_plugins = quota
+##### SmartMachine Close.
+
+##
+## Mailbox handling optimizations
+##
+
+# Mailbox list indexes can be used to optimize IMAP STATUS commands. They are
+# also required for IMAP NOTIFY extension to be enabled.
+#mailbox_list_index = yes
+
+# Trust mailbox list index to be up-to-date. This reduces disk I/O at the cost
+# of potentially returning out-of-date results after e.g. server crashes.
+# The results will be automatically fixed once the folders are opened.
+#mailbox_list_index_very_dirty_syncs = yes
+
+# Should INBOX be kept up-to-date in the mailbox list index? By default it's
+# not, because most of the mailbox accesses will open INBOX anyway.
+#mailbox_list_index_include_inbox = no
+
+# The minimum number of mails in a mailbox before updates are done to cache
+# file. This allows optimizing Dovecot's behavior to do less disk writes at
+# the cost of more disk reads.
+#mail_cache_min_mail_count = 0
+
+# When IDLE command is running, mailbox is checked once in a while to see if
+# there are any new mails or other changes. This setting defines the minimum
+# time to wait between those checks. Dovecot can also use inotify and
+# kqueue to find out immediately when changes occur.
+#mailbox_idle_check_interval = 30 secs
+
+# Save mails with CR+LF instead of plain LF. This makes sending those mails
+# take less CPU, especially with sendfile() syscall with Linux and FreeBSD.
+# But it also creates a bit more disk I/O which may just make it slower.
+# Also note that if other software reads the mboxes/maildirs, they may handle
+# the extra CRs wrong and cause problems.
+#mail_save_crlf = no
+
+# Max number of mails to keep open and prefetch to memory. This only works with
+# some mailbox formats and/or operating systems.
+#mail_prefetch_count = 0
+
+# How often to scan for stale temporary files and delete them (0 = never).
+# These should exist only after Dovecot dies in the middle of saving mails.
+#mail_temp_scan_interval = 1w
+
+# How many slow mail accesses sorting can perform before it returns failure.
+# With IMAP the reply is: NO [LIMIT] Requested sort would have taken too long.
+# The untagged SORT reply is still returned, but it's likely not correct.
+#mail_sort_max_read_count = 0
+
+protocol !indexer-worker {
+  # If folder vsize calculation requires opening more than this many mails from
+  # disk (i.e. mail sizes aren't in cache already), return failure and finish
+  # the calculation via indexer process. Disabled by default. This setting must
+  # be 0 for indexer-worker processes.
+  #mail_vsize_bg_after_count = 0
+}
+
+##
+## Maildir-specific settings
+##
+
+# By default LIST command returns all entries in maildir beginning with a dot.
+# Enabling this option makes Dovecot return only entries which are directories.
+# This is done by stat()ing each entry, so it causes more disk I/O.
+# (For systems setting struct dirent->d_type, this check is free and it's
+# done always regardless of this setting)
+#maildir_stat_dirs = no
+
+# When copying a message, do it with hard links whenever possible. This makes
+# the performance much better, and it's unlikely to have any side effects.
+#maildir_copy_with_hardlinks = yes
+
+# Assume Dovecot is the only MUA accessing Maildir: Scan cur/ directory only
+# when its mtime changes unexpectedly or when we can't find the mail otherwise.
+#maildir_very_dirty_syncs = no
+
+# If enabled, Dovecot doesn't use the S=<size> in the Maildir filenames for
+# getting the mail's physical size, except when recalculating Maildir++ quota.
+# This can be useful in systems where a lot of the Maildir filenames have a
+# broken size. The performance hit for enabling this is very small.
+#maildir_broken_filename_sizes = no
+
+# Always move mails from new/ directory to cur/, even when the \Recent flags
+# aren't being reset.
+#maildir_empty_new = no
+
+##
+## mbox-specific settings
+##
+
+# Which locking methods to use for locking mbox. There are four available:
+#  dotlock: Create <mailbox>.lock file. This is the oldest and most NFS-safe
+#           solution. If you want to use /var/mail/ like directory, the users
+#           will need write access to that directory.
+#  dotlock_try: Same as dotlock, but if it fails because of permissions or
+#               because there isn't enough disk space, just skip it.
+#  fcntl  : Use this if possible. Works with NFS too if lockd is used.
+#  flock  : May not exist in all systems. Doesn't work with NFS.
+#  lockf  : May not exist in all systems. Doesn't work with NFS.
+#
+# You can use multiple locking methods; if you do the order they're declared
+# in is important to avoid deadlocks if other MTAs/MUAs are using multiple
+# locking methods as well. Some operating systems don't allow using some of
+# them simultaneously.
+#
+# The Debian value for mbox_write_locks differs from upstream Dovecot. It is
+# changed to be compliant with Debian Policy (section 11.6) for NFS safety.
+#       Dovecot: mbox_write_locks = dotlock fcntl
+#       Debian:  mbox_write_locks = fcntl dotlock
+#
+#mbox_read_locks = fcntl
+#mbox_write_locks = fcntl dotlock
+
+# Maximum time to wait for lock (all of them) before aborting.
+#mbox_lock_timeout = 5 mins
+
+# If dotlock exists but the mailbox isn't modified in any way, override the
+# lock file after this much time.
+#mbox_dotlock_change_timeout = 2 mins
+
+# When mbox changes unexpectedly we have to fully read it to find out what
+# changed. If the mbox is large this can take a long time. Since the change
+# is usually just a newly appended mail, it'd be faster to simply read the
+# new mails. If this setting is enabled, Dovecot does this but still safely
+# fallbacks to re-reading the whole mbox file whenever something in mbox isn't
+# how it's expected to be. The only real downside to this setting is that if
+# some other MUA changes message flags, Dovecot doesn't notice it immediately.
+# Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK 
+# commands.
+#mbox_dirty_syncs = yes
+
+# Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE,
+# EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored.
+#mbox_very_dirty_syncs = no
+
+# Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK
+# commands and when closing the mailbox). This is especially useful for POP3
+# where clients often delete all mails. The downside is that our changes
+# aren't immediately visible to other MUAs.
+#mbox_lazy_writes = yes
+
+# If mbox size is smaller than this (e.g. 100k), don't write index files.
+# If an index file already exists it's still read, just not updated.
+#mbox_min_index_size = 0
+
+# Mail header selection algorithm to use for MD5 POP3 UIDLs when
+# pop3_uidl_format=%m. For backwards compatibility we use apop3d inspired
+# algorithm, but it fails if the first Received: header isn't unique in all
+# mails. An alternative algorithm is "all" that selects all headers.
+#mbox_md5 = apop3d
+
+##
+## mdbox-specific settings
+##
+
+# Maximum dbox file size until it's rotated.
+#mdbox_rotate_size = 10M
+
+# Maximum dbox file age until it's rotated. Typically in days. Day begins
+# from midnight, so 1d = today, 2d = yesterday, etc. 0 = check disabled.
+#mdbox_rotate_interval = 0
+
+# When creating new mdbox files, immediately preallocate their size to
+# mdbox_rotate_size. This setting currently works only in Linux with some
+# filesystems (ext4, xfs).
+#mdbox_preallocate_space = no
+
+##
+## Mail attachments
+##
+
+# sdbox and mdbox support saving mail attachments to external files, which
+# also allows single instance storage for them. Other backends don't support
+# this for now.
+
+# Directory root where to store mail attachments. Disabled, if empty.
+#mail_attachment_dir =
+
+# Attachments smaller than this aren't saved externally. It's also possible to
+# write a plugin to disable saving specific attachments externally.
+#mail_attachment_min_size = 128k
+
+# Filesystem backend to use for saving attachments:
+#  posix : No SiS done by Dovecot (but this might help FS's own deduplication)
+#  sis posix : SiS with immediate byte-by-byte comparison during saving
+#  sis-queue posix : SiS with delayed comparison and deduplication
+#mail_attachment_fs = sis posix
+
+# Hash format to use in attachment filenames. You can add any text and
+# variables: %{md4}, %{md5}, %{sha1}, %{sha256}, %{sha512}, %{size}.
+# Variables can be truncated, e.g. %{sha256:80} returns only first 80 bits
+#mail_attachment_hash = %{sha1}
+
+# Settings to control adding $HasAttachment or $HasNoAttachment keywords.
+# By default, all MIME parts with Content-Disposition=attachment, or inlines
+# with filename parameter are consired attachments.
+#   add-flags - Add the keywords when saving new mails or when fetching can
+#      do it efficiently.
+#   content-type=type or !type - Include/exclude content type. Excluding will
+#     never consider the matched MIME part as attachment. Including will only
+#     negate an exclusion (e.g. content-type=!foo/* content-type=foo/bar).
+#   exclude-inlined - Exclude any Content-Disposition=inline MIME part.
+#mail_attachment_detection_options =

data/lib/smart_machine/templates/dotsmartmachine/config/emailer/etc/dovecot/conf.d/10-master.conf

@@ -0,0 +1,153 @@
+#default_process_limit = 100
+#default_client_limit = 1000
+
+# Default VSZ (virtual memory size) limit for service processes. This is mainly
+# intended to catch and kill processes that leak memory before they eat up
+# everything.
+#default_vsz_limit = 256M
+
+# Login user is internally used by login processes. This is the most untrusted
+# user in Dovecot system. It shouldn't have access to anything at all.
+#default_login_user = dovenull
+
+# Internal user is used by unprivileged processes. It should be separate from
+# login user, so that login processes can't disturb other processes.
+#default_internal_user = dovecot
+
+service imap-login {
+  inet_listener imap {
+    #port = 143
+    ##### SmartMachine Begin.
+    port = 0
+    ##### SmartMachine Close.
+  }
+  inet_listener imaps {
+    #port = 993
+    #ssl = yes
+  }
+
+  # Number of connections to handle before starting a new process. Typically
+  # the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0
+  # is faster. <doc/wiki/LoginProcess.txt>
+  #service_count = 1
+
+  # Number of processes to always keep waiting for more connections.
+  #process_min_avail = 0
+
+  # If you set service_count=0, you probably need to grow this.
+  #vsz_limit = $default_vsz_limit
+}
+
+service pop3-login {
+  inet_listener pop3 {
+    #port = 110
+    ##### SmartMachine Begin.
+    port = 0
+    ##### SmartMachine Close.
+  }
+  inet_listener pop3s {
+    #port = 995
+    #ssl = yes
+  }
+}
+
+service submission-login {
+  inet_listener submission {
+    #port = 587
+  }
+}
+
+service lmtp {
+  ##### SmartMachine Begin.
+  #unix_listener lmtp {
+  #  #mode = 0666
+  #}
+  unix_listener /var/spool/postfix/private/dovecot-lmtp {
+    mode = 0600
+    user = postfix
+    group = postfix
+  }
+  ##### SmartMachine Close.
+
+  # Create inet listener only if you can't use the above UNIX socket
+  #inet_listener lmtp {
+    # Avoid making LMTP visible for the entire internet
+    #address =
+    #port = 
+  #}
+}
+
+service imap {
+  # Most of the memory goes to mmap()ing files. You may need to increase this
+  # limit if you have huge mailboxes.
+  #vsz_limit = $default_vsz_limit
+
+  # Max. number of IMAP processes (connections)
+  #process_limit = 1024
+}
+
+service pop3 {
+  # Max. number of POP3 processes (connections)
+  #process_limit = 1024
+}
+
+service submission {
+  # Max. number of SMTP Submission processes (connections)
+  #process_limit = 1024
+}
+
+service auth {
+  # auth_socket_path points to this userdb socket by default. It's typically
+  # used by dovecot-lda, doveadm, possibly imap process, etc. Users that have
+  # full permissions to this socket are able to get a list of all usernames and
+  # get the results of everyone's userdb lookups.
+  #
+  # The default 0666 mode allows anyone to connect to the socket, but the
+  # userdb lookups will succeed only if the userdb returns an "uid" field that
+  # matches the caller process's UID. Also if caller's uid or gid matches the
+  # socket's uid or gid the lookup succeeds. Anything else causes a failure.
+  #
+  # To give the caller full permissions to lookup all users, set the mode to
+  # something else than 0666 and Dovecot lets the kernel enforce the
+  # permissions (e.g. 0777 allows everyone full permissions).
+  unix_listener auth-userdb {
+    #mode = 0666
+    #user = 
+    #group = 
+  }
+
+  # Postfix smtp-auth
+  #unix_listener /var/spool/postfix/private/auth {
+  #  mode = 0666
+  #}
+  ##### SmartMachine Begin.
+  unix_listener /var/spool/postfix/private/auth {
+    mode = 0660
+    user = postfix
+    group = postfix
+  }
+  ##### SmartMachine Close.
+
+  # Auth process is run as this user.
+  #user = $default_internal_user
+}
+
+service auth-worker {
+  # Auth worker process is run as root by default, so that it can access
+  # /etc/shadow. If this isn't necessary, the user should be changed to
+  # $default_internal_user.
+  #user = root
+  ##### SmartMachine Begin.
+  user = $default_internal_user
+  ##### SmartMachine Close.
+}
+
+service dict {
+  # If dict proxy is used, mail processes should have access to its socket.
+  # For example: mode=0660, group=vmail and global mail_access_groups=vmail
+  unix_listener dict {
+    #mode = 0600
+    #user = 
+    #group = 
+  }
+}

data/lib/smart_machine/templates/dotsmartmachine/config/emailer/etc/dovecot/conf.d/10-ssl.conf

@@ -0,0 +1,87 @@
+##
+## SSL settings
+##
+
+# SSL/TLS support: yes, no, required. <doc/wiki/SSL.txt>
+##### SmartMachine Begin.
+#ssl = yes
+ssl = required
+##### SmartMachine Close.
+
+# PEM encoded X.509 SSL/TLS certificate and private key. They're opened before
+# dropping root privileges, so keep the key file unreadable by anyone but
+# root. Included doc/mkcert.sh can be used to easily generate self-signed
+# certificate, just make sure to update the domains in dovecot-openssl.cnf
+##### SmartMachine Begin.
+#ssl_cert = </etc/dovecot/private/dovecot.pem
+#ssl_key = </etc/dovecot/private/dovecot.key
+ssl_cert = </etc/letsencrypt/live/%<fqdn>s/fullchain.pem
+ssl_key = </etc/letsencrypt/live/%<fqdn>s/key.pem
+##### SmartMachine Close.
+
+# If key file is password protected, give the password here. Alternatively
+# give it when starting dovecot with -p parameter. Since this file is often
+# world-readable, you may want to place this setting instead to a different
+# root owned 0600 file by using ssl_key_password = <path.
+#ssl_key_password =
+
+# PEM encoded trusted certificate authority. Set this only if you intend to use
+# ssl_verify_client_cert=yes. The file should contain the CA certificate(s)
+# followed by the matching CRL(s). (e.g. ssl_ca = </etc/ssl/certs/ca.pem)
+#ssl_ca = 
+
+# Require that CRL check succeeds for client certificates.
+#ssl_require_crl = yes
+
+# Directory and/or file for trusted SSL CA certificates. These are used only
+# when Dovecot needs to act as an SSL client (e.g. imapc backend or
+# submission service). The directory is usually /etc/ssl/certs in
+# Debian-based systems and the file is /etc/pki/tls/cert.pem in
+# RedHat-based systems. Note that ssl_client_ca_file isn't recommended with
+# large CA bundles, because it leads to excessive memory usage.
+#ssl_client_ca_dir =
+ssl_client_ca_dir = /etc/ssl/certs
+#ssl_client_ca_file =
+
+# Require valid cert when connecting to a remote server
+#ssl_client_require_valid_cert = yes
+
+# Request client to send a certificate. If you also want to require it, set
+# auth_ssl_require_client_cert=yes in auth section.
+#ssl_verify_client_cert = no
+
+# Which field from certificate to use for username. commonName and
+# x500UniqueIdentifier are the usual choices. You'll also need to set
+# auth_ssl_username_from_cert=yes.
+#ssl_cert_username_field = commonName
+
+# SSL DH parameters
+# Generate new params with `openssl dhparam -out /etc/dovecot/dh.pem 4096`
+# Or migrate from old ssl-parameters.dat file with the command dovecot
+# gives on startup when ssl_dh is unset.
+ssl_dh = </usr/share/dovecot/dh.pem
+
+# Minimum SSL protocol version to use. Potentially recognized values are SSLv3,
+# TLSv1, TLSv1.1, and TLSv1.2, depending on the OpenSSL version used.
+#ssl_min_protocol = TLSv1
+
+# SSL ciphers to use, the default is:
+#ssl_cipher_list = ALL:!kRSA:!SRP:!kDHd:!DSS:!aNULL:!eNULL:!EXPORT:!DES:!3DES:!MD5:!PSK:!RC4:!ADH:!LOW@STRENGTH
+# To disable non-EC DH, use:
+#ssl_cipher_list = ALL:!DH:!kRSA:!SRP:!kDHd:!DSS:!aNULL:!eNULL:!EXPORT:!DES:!3DES:!MD5:!PSK:!RC4:!ADH:!LOW@STRENGTH
+
+# Colon separated list of elliptic curves to use. Empty value (the default)
+# means use the defaults from the SSL library. P-521:P-384:P-256 would be an
+# example of a valid value.
+#ssl_curve_list =
+
+# Prefer the server's order of ciphers over client's.
+#ssl_prefer_server_ciphers = no
+
+# SSL crypto device to use, for valid values run "openssl engine"
+#ssl_crypto_device =
+
+# SSL extra options. Currently supported options are:
+#   compression - Enable compression.
+#   no_ticket - Disable SSL session tickets.
+#ssl_options =