slayer-thrift 0.7.0

data/lib/thrift/transport/io_stream_transport.rb

@@ -0,0 +1,39 @@
+# encoding: ascii-8bit
+# 
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements. See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership. The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License. You may obtain a copy of the License at
+# 
+#   http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied. See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+
+# Very very simple implementation of wrapping two objects, one with a #read
+# method and one with a #write method, into a transport for thrift.
+#
+# Assumes both objects are open, remain open, don't require flushing, etc.
+#
+module Thrift
+  class IOStreamTransport < BaseTransport
+    def initialize(input, output)
+      @input = input
+      @output = output
+    end
+
+    def open?; not @input.closed? or not @output.closed? end
+    def read(sz); @input.read(sz) end
+    def write(buf); @output.write(buf) end
+    def close; @input.close; @output.close end
+    def to_io; @input end # we're assuming this is used in a IO.select for reading
+  end
+end

data/lib/thrift/transport/memory_buffer_transport.rb

@@ -0,0 +1,125 @@
+# encoding: ascii-8bit
+# 
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements. See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership. The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License. You may obtain a copy of the License at
+# 
+#   http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied. See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+
+module Thrift
+  class MemoryBufferTransport < BaseTransport
+    GARBAGE_BUFFER_SIZE = 4*(2**10) # 4kB
+
+    # If you pass a string to this, you should #dup that string
+    # unless you want it to be modified by #read and #write
+    #--
+    # this behavior is no longer required. If you wish to change it
+    # go ahead, just make sure the specs pass
+    def initialize(buffer = nil)
+      @buf = buffer || ''
+      @index = 0
+    end
+
+    def open?
+      return true
+    end
+
+    def open
+    end
+
+    def close
+    end
+
+    def peek
+      @index < @buf.size
+    end
+
+    # this method does not use the passed object directly but copies it
+    def reset_buffer(new_buf = '')
+      @buf.replace new_buf
+      @index = 0
+    end
+
+    def available
+      @buf.length - @index
+    end
+
+    def read(len)
+      data = @buf.slice(@index, len)
+      @index += len
+      @index = @buf.size if @index > @buf.size
+      if @index >= GARBAGE_BUFFER_SIZE
+        @buf = @buf.slice(@index..-1)
+        @index = 0
+      end
+      if data.size < len
+        raise EOFError, "Not enough bytes remain in buffer"
+      end
+      data
+    end
+
+    def read_byte
+      raise EOFError.new("Not enough bytes remain in buffer") if @index >= @buf.size
+      val = ::Thrift::TransportUtils.get_string_byte(@buf, @index)
+      @index += 1
+      if @index >= GARBAGE_BUFFER_SIZE
+        @buf = @buf.slice(@index..-1)
+        @index = 0
+      end
+      val
+    end
+
+    def read_into_buffer(buffer, size)
+      i = 0
+      while i < size
+        raise EOFError.new("Not enough bytes remain in buffer") if @index >= @buf.size
+
+        # The read buffer has some data now, so copy bytes over to the output buffer.
+        byte = ::Thrift::TransportUtils.get_string_byte(@buf, @index)
+        ::Thrift::TransportUtils.set_string_byte(buffer, i, byte)
+        @index += 1
+        i += 1
+      end
+      if @index >= GARBAGE_BUFFER_SIZE
+        @buf = @buf.slice(@index..-1)
+        @index = 0
+      end
+      i
+    end
+
+    def write(wbuf)
+      @buf << wbuf
+    end
+
+    def flush
+    end
+
+    def inspect_buffer
+      out = []
+      for idx in 0...(@buf.size)
+        # if idx != 0
+        #   out << " "
+        # end
+      
+        if idx == @index
+          out << ">"
+        end
+      
+        out << @buf[idx].ord.to_s(16)
+      end
+      out.join(" ")
+    end
+  end
+end

data/lib/thrift/transport/server_socket.rb

@@ -0,0 +1,63 @@
+# encoding: ascii-8bit
+# 
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements. See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership. The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License. You may obtain a copy of the License at
+# 
+#   http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied. See the License for the
+# specific language governing permissions and limitations
+# under the License.
+# 
+
+require 'socket'
+
+module Thrift
+  class ServerSocket < BaseServerTransport
+    # call-seq: initialize(host = nil, port)
+    def initialize(host_or_port, port = nil)
+      if port
+        @host = host_or_port
+        @port = port
+      else
+        @host = nil
+        @port = host_or_port
+      end
+      @handle = nil
+    end
+
+    attr_reader :handle
+
+    def listen
+      @handle = TCPServer.new(@host, @port)
+    end
+
+    def accept
+      unless @handle.nil?
+        sock = @handle.accept
+        trans = Socket.new
+        trans.handle = sock
+        trans
+      end
+    end
+
+    def close
+     @handle.close unless @handle.nil? or @handle.closed?
+     @handle = nil
+    end
+
+    def closed?
+      @handle.nil? or @handle.closed?
+    end
+
+    alias to_io handle
+  end
+end

data/lib/thrift/transport/socket.rb

@@ -0,0 +1,137 @@
+# encoding: ascii-8bit
+# 
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements. See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership. The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License. You may obtain a copy of the License at
+# 
+#   http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied. See the License for the
+# specific language governing permissions and limitations
+# under the License.
+# 
+
+require 'socket'
+
+module Thrift
+  class Socket < BaseTransport
+    def initialize(host='localhost', port=9090, timeout=nil)
+      @host = host
+      @port = port
+      @timeout = timeout
+      @desc = "#{host}:#{port}"
+      @handle = nil
+    end
+
+    attr_accessor :handle, :timeout
+
+    def open
+      begin
+        addrinfo = ::Socket::getaddrinfo(@host, @port).first
+        @handle = ::Socket.new(addrinfo[4], ::Socket::SOCK_STREAM, 0)
+        sockaddr = ::Socket.sockaddr_in(addrinfo[1], addrinfo[3])
+        begin
+          @handle.connect_nonblock(sockaddr)
+        rescue Errno::EINPROGRESS
+          unless IO.select(nil, [ @handle ], nil, @timeout)
+            raise TransportException.new(TransportException::NOT_OPEN, "Connection timeout to #{@desc}")
+          end
+          begin
+            @handle.connect_nonblock(sockaddr)
+          rescue Errno::EISCONN
+          end
+        end
+        @handle
+      rescue StandardError => e
+        raise TransportException.new(TransportException::NOT_OPEN, "Could not connect to #{@desc}: #{e}")
+      end
+    end
+
+    def open?
+      !@handle.nil? and !@handle.closed?
+    end
+
+    def write(str)
+      raise IOError, "closed stream" unless open?
+      begin
+        if @timeout.nil? or @timeout == 0
+          @handle.write(str)
+        else
+          len = 0
+          start = Time.now
+          while Time.now - start < @timeout
+            rd, wr, = IO.select(nil, [@handle], nil, @timeout)
+            if wr and not wr.empty?
+              len += @handle.write_nonblock(str[len..-1])
+              break if len >= str.length
+            end
+          end
+          if len < str.length
+            raise TransportException.new(TransportException::TIMED_OUT, "Socket: Timed out writing #{str.length} bytes to #{@desc}")
+          else
+            len
+          end
+        end
+      rescue TransportException => e
+        # pass this on
+        raise e
+      rescue StandardError => e
+        @handle.close
+        @handle = nil
+        raise TransportException.new(TransportException::NOT_OPEN, e.message)
+      end
+    end
+
+    def read(sz)
+      raise IOError, "closed stream" unless open?
+
+      begin
+        if @timeout.nil? or @timeout == 0
+          data = @handle.readpartial(sz)
+        else
+          # it's possible to interrupt select for something other than the timeout
+          # so we need to ensure we've waited long enough, but not too long
+          start = Time.now
+          timespent = 0
+          rd = loop do
+            rd, = IO.select([@handle], nil, nil, @timeout - timespent)
+            timespent = Time.now - start
+            break rd if (rd and not rd.empty?) or timespent >= @timeout
+          end
+          if rd.nil? or rd.empty?
+            raise TransportException.new(TransportException::TIMED_OUT, "Socket: Timed out reading #{sz} bytes from #{@desc}")
+          else
+            data = @handle.readpartial(sz)
+          end
+        end
+      rescue TransportException => e
+        # don't let this get caught by the StandardError handler
+        raise e
+      rescue StandardError => e
+        @handle.close unless @handle.closed?
+        @handle = nil
+        raise TransportException.new(TransportException::NOT_OPEN, e.message)
+      end
+      if (data.nil? or data.length == 0)
+        raise TransportException.new(TransportException::UNKNOWN, "Socket: Could not read #{sz} bytes from #{@desc}")
+      end
+      data
+    end
+
+    def close
+      @handle.close unless @handle.nil? or @handle.closed?
+      @handle = nil
+    end
+
+    def to_io
+      @handle
+    end
+  end
+end

data/lib/thrift/transport/unix_server_socket.rb

@@ -0,0 +1,60 @@
+# encoding: ascii-8bit
+# 
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements. See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership. The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License. You may obtain a copy of the License at
+# 
+#   http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied. See the License for the
+# specific language governing permissions and limitations
+# under the License.
+# 
+
+require 'socket'
+
+module Thrift
+  class UNIXServerSocket < BaseServerTransport
+    def initialize(path)
+      @path = path
+      @handle = nil
+    end
+
+    attr_accessor :handle
+
+    def listen
+      @handle = ::UNIXServer.new(@path)
+    end
+
+    def accept
+      unless @handle.nil?
+        sock = @handle.accept
+        trans = UNIXSocket.new(nil)
+        trans.handle = sock
+        trans
+      end
+    end
+
+    def close
+      if @handle
+        @handle.close unless @handle.closed?
+        @handle = nil
+        # UNIXServer doesn't delete the socket file, so we have to do it ourselves
+        File.delete(@path)
+      end
+    end
+
+    def closed?
+      @handle.nil? or @handle.closed?
+    end
+
+    alias to_io handle
+  end
+end

data/lib/thrift/transport/unix_socket.rb

@@ -0,0 +1,40 @@
+# encoding: ascii-8bit
+# 
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements. See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership. The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License. You may obtain a copy of the License at
+# 
+#   http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied. See the License for the
+# specific language governing permissions and limitations
+# under the License.
+# 
+
+require 'socket'
+
+module Thrift
+  class UNIXSocket < Socket
+    def initialize(path, timeout=nil)
+      @path = path
+      @timeout = timeout
+      @desc = @path # for read()'s error
+      @handle = nil
+    end
+
+    def open
+      begin
+        @handle = ::UNIXSocket.new(@path)
+      rescue StandardError
+        raise TransportException.new(TransportException::NOT_OPEN, "Could not open UNIX socket at #{@path}")
+      end
+    end
+  end
+end