sketchup-api-stubs 0.7.9 → 0.7.11

data/lib/sketchup-api-stubs/stubs/Sketchup/Loop.rb

@@ -1,137 +1,137 @@
-# Copyright:: Copyright 2023 Trimble Inc.
-# License:: The MIT License (MIT)
-
-# Loop is a low level topology class that will not need to be used often. A
-# Loop is a chain of Edges that bound a Face.
-#
-# @version SketchUp 6.0
-class Sketchup::Loop < Sketchup::Entity
-
-  # Instance Methods
-
-  # Determine if the loop is convex.
-  #
-  # @example
-  #   entities = Sketchup.active_model.active_entities
-  #   points = []
-  #   points << Geom::Point3d.new(0, 0, 0)
-  #   points << Geom::Point3d.new(100, 0, 0)
-  #   points << Geom::Point3d.new(100, 200, 0)
-  #   points << Geom::Point3d.new(0, 200, 0)
-  #   face = entities.add_face(points)
-  #   loop = face.outer_loop
-  #   if loop.convex?
-  #     puts "Loop is convex."
-  #   else
-  #     puts "Loop is not convex."
-  #   end
-  #
-  # @return [Boolean] status - true if convex, false if not convex.
-  #
-  # @version SketchUp 6.0
-  def convex?
-  end
-
-  # Get an array of the edges that define the loop in an ordered sequence.
-  #
-  # @example
-  #   entities = Sketchup.active_model.active_entities
-  #   points = []
-  #   points << Geom::Point3d.new(0, 0, 0)
-  #   points << Geom::Point3d.new(100, 0, 0)
-  #   points << Geom::Point3d.new(100, 200, 0)
-  #   points << Geom::Point3d.new(0, 200, 0)
-  #   face = entities.add_face(points)
-  #   loop = face.outer_loop
-  #   edges = loop.edges
-  #
-  # @return edges - an array of Edge objects if successful.
-  #
-  # @version SketchUp 6.0
-  def edges
-  end
-
-  # Get an array of the EdgeUse objects that define this loop in an ordered
-  # sequence.
-  #
-  # @example
-  #   entities = Sketchup.active_model.active_entities
-  #   points = []
-  #   points << Geom::Point3d.new(0, 0, 0)
-  #   points << Geom::Point3d.new(100, 0, 0)
-  #   points << Geom::Point3d.new(100, 200, 0)
-  #   points << Geom::Point3d.new(0, 200, 0)
-  #   face = entities.add_face(points)
-  #   loop = face.outer_loop
-  #   edgeuses = loop.edgeuses
-  #
-  # @return edgeuses - an array of EdgeUse objects if successful.
-  #
-  # @version SketchUp 6.0
-  def edgeuses
-  end
-
-  # Get the Face object that is bounded by this loop.
-  #
-  # @example
-  #   entities = Sketchup.active_model.active_entities
-  #   points = []
-  #   points << Geom::Point3d.new(0, 0, 0)
-  #   points << Geom::Point3d.new(100, 0, 0)
-  #   points << Geom::Point3d.new(100, 200, 0)
-  #   points << Geom::Point3d.new(0, 200, 0)
-  #   face = entities.add_face(points)
-  #   loop = face.outer_loop
-  #   loop_face = loop.face
-  #
-  # @return face - a Face object if successful
-  #
-  # @version SketchUp 6.0
-  def face
-  end
-
-  # Determine if this is an outer loop. Each face has one outer loop, and will
-  # have one loop for each hole.
-  #
-  # @example
-  #   entities = Sketchup.active_model.active_entities
-  #   points = []
-  #   points << Geom::Point3d.new(0, 0, 0)
-  #   points << Geom::Point3d.new(100, 0, 0)
-  #   points << Geom::Point3d.new(100, 200, 0)
-  #   points << Geom::Point3d.new(0, 200, 0)
-  #   face = entities.add_face(points)
-  #   loop = face.outer_loop
-  #   if loop.outer?
-  #     puts "Loop is an outer loop."
-  #   else
-  #     puts "Loop is not an outer loop."
-  #   end
-  #
-  # @return [Boolean] status - true if the loop is an outer loop, false if it
-  #   is not an outer loop.
-  #
-  # @version SketchUp 6.0
-  def outer?
-  end
-
-  # Get an array of the vertices that define the loop in an ordered sequence.
-  #
-  # @example
-  #   entities = Sketchup.active_model.active_entities
-  #   points = []
-  #   points << Geom::Point3d.new(0, 0, 0)
-  #   points << Geom::Point3d.new(100, 0, 0)
-  #   points << Geom::Point3d.new(100, 200, 0)
-  #   points << Geom::Point3d.new(0, 200, 0)
-  #   face = entities.add_face(points)
-  #   loop = face.outer_loop
-  #   vertices = loop.vertices
-  #
-  # @return vertices - an array of Vertex objects if successful.
-  #
-  # @version SketchUp 6.0
-  def vertices
-  end
-
-end
+# Copyright:: Copyright 2026 Trimble Inc.
+# License:: The MIT License (MIT)
+
+# Loop is a low level topology class that will not need to be used often. A
+# Loop is a chain of Edges that bound a Face.
+#
+# @version SketchUp 6.0
+class Sketchup::Loop < Sketchup::Entity
+
+  # Instance Methods
+
+  # Determine if the loop is convex.
+  #
+  # @example
+  #   entities = Sketchup.active_model.active_entities
+  #   points = []
+  #   points << Geom::Point3d.new(0, 0, 0)
+  #   points << Geom::Point3d.new(100, 0, 0)
+  #   points << Geom::Point3d.new(100, 200, 0)
+  #   points << Geom::Point3d.new(0, 200, 0)
+  #   face = entities.add_face(points)
+  #   loop = face.outer_loop
+  #   if loop.convex?
+  #     puts "Loop is convex."
+  #   else
+  #     puts "Loop is not convex."
+  #   end
+  #
+  # @return [Boolean] status - true if convex, false if not convex.
+  #
+  # @version SketchUp 6.0
+  def convex?
+  end
+
+  # Get an array of the edges that define the loop in an ordered sequence.
+  #
+  # @example
+  #   entities = Sketchup.active_model.active_entities
+  #   points = []
+  #   points << Geom::Point3d.new(0, 0, 0)
+  #   points << Geom::Point3d.new(100, 0, 0)
+  #   points << Geom::Point3d.new(100, 200, 0)
+  #   points << Geom::Point3d.new(0, 200, 0)
+  #   face = entities.add_face(points)
+  #   loop = face.outer_loop
+  #   edges = loop.edges
+  #
+  # @return edges - an array of Edge objects if successful.
+  #
+  # @version SketchUp 6.0
+  def edges
+  end
+
+  # Get an array of the EdgeUse objects that define this loop in an ordered
+  # sequence.
+  #
+  # @example
+  #   entities = Sketchup.active_model.active_entities
+  #   points = []
+  #   points << Geom::Point3d.new(0, 0, 0)
+  #   points << Geom::Point3d.new(100, 0, 0)
+  #   points << Geom::Point3d.new(100, 200, 0)
+  #   points << Geom::Point3d.new(0, 200, 0)
+  #   face = entities.add_face(points)
+  #   loop = face.outer_loop
+  #   edgeuses = loop.edgeuses
+  #
+  # @return edgeuses - an array of EdgeUse objects if successful.
+  #
+  # @version SketchUp 6.0
+  def edgeuses
+  end
+
+  # Get the Face object that is bounded by this loop.
+  #
+  # @example
+  #   entities = Sketchup.active_model.active_entities
+  #   points = []
+  #   points << Geom::Point3d.new(0, 0, 0)
+  #   points << Geom::Point3d.new(100, 0, 0)
+  #   points << Geom::Point3d.new(100, 200, 0)
+  #   points << Geom::Point3d.new(0, 200, 0)
+  #   face = entities.add_face(points)
+  #   loop = face.outer_loop
+  #   loop_face = loop.face
+  #
+  # @return face - a Face object if successful
+  #
+  # @version SketchUp 6.0
+  def face
+  end
+
+  # Determine if this is an outer loop. Each face has one outer loop, and will
+  # have one loop for each hole.
+  #
+  # @example
+  #   entities = Sketchup.active_model.active_entities
+  #   points = []
+  #   points << Geom::Point3d.new(0, 0, 0)
+  #   points << Geom::Point3d.new(100, 0, 0)
+  #   points << Geom::Point3d.new(100, 200, 0)
+  #   points << Geom::Point3d.new(0, 200, 0)
+  #   face = entities.add_face(points)
+  #   loop = face.outer_loop
+  #   if loop.outer?
+  #     puts "Loop is an outer loop."
+  #   else
+  #     puts "Loop is not an outer loop."
+  #   end
+  #
+  # @return [Boolean] status - true if the loop is an outer loop, false if it
+  #   is not an outer loop.
+  #
+  # @version SketchUp 6.0
+  def outer?
+  end
+
+  # Get an array of the vertices that define the loop in an ordered sequence.
+  #
+  # @example
+  #   entities = Sketchup.active_model.active_entities
+  #   points = []
+  #   points << Geom::Point3d.new(0, 0, 0)
+  #   points << Geom::Point3d.new(100, 0, 0)
+  #   points << Geom::Point3d.new(100, 200, 0)
+  #   points << Geom::Point3d.new(0, 200, 0)
+  #   face = entities.add_face(points)
+  #   loop = face.outer_loop
+  #   vertices = loop.vertices
+  #
+  # @return vertices - an array of Vertex objects if successful.
+  #
+  # @version SketchUp 6.0
+  def vertices
+  end
+
+end