sketchup-api-stubs 0.7.7 → 0.7.9

data/lib/sketchup-api-stubs/stubs/Sketchup/EdgeUse.rb

@@ -1,211 +1,211 @@
-# Copyright:: Copyright 2021 Trimble Inc.
-# License:: The MIT License (MIT)
-
-# The EdgeUse class defines how an Edge is used in the definition of a Face.
-#
-# @version SketchUp 6.0
-class Sketchup::EdgeUse < Sketchup::Entity
-
-  # Instance Methods
-
-  # The edge method is used to retrieve the edge for the edge use.
-  #
-  # @example
-  #   entities = Sketchup.active_model.active_entities
-  #   points = []
-  #   points << Geom::Point3d.new(0, 0, 0)
-  #   points << Geom::Point3d.new(100, 0, 0)
-  #   points << Geom::Point3d.new(100, 200, 0)
-  #   points << Geom::Point3d.new(0, 200, 0)
-  #   face = entities.add_face(points)
-  #   loop = face.outer_loop
-  #   edgeuses = loop.edgeuses
-  #   edgeuse = edgeuses[0]
-  #   edge = edgeuse.edge
-  #
-  # @return edge - an Edge object used by this edge use
-  #
-  # @version SketchUp 6.0
-  def edge
-  end
-
-  # The end_vertex_normal method is used to retrieve the vertex normal for the
-  # end point of this edgeuse.
-  #
-  # @example
-  #   entities = Sketchup.active_model.active_entities
-  #   points = []
-  #   points << Geom::Point3d.new(0, 0, 0)
-  #   points << Geom::Point3d.new(100, 0, 0)
-  #   points << Geom::Point3d.new(100, 200, 0)
-  #   points << Geom::Point3d.new(0, 200, 0)
-  #   face = entities.add_face(points)
-  #   loop = face.outer_loop
-  #   edgeuses = loop.edgeuses
-  #   edgeuse = edgeuses[0]
-  #   vector3d = edgeuse.end_vertex_normal
-  #
-  # @return vector3d - a vector3d object if successful.
-  #
-  # @version SketchUp 6.0
-  def end_vertex_normal
-  end
-
-  # The face method is used to retrieve the face used by this edge use.
-  #
-  # @example
-  #   entities = Sketchup.active_model.active_entities
-  #   points = []
-  #   points << Geom::Point3d.new(0, 0, 0)
-  #   points << Geom::Point3d.new(100, 0, 0)
-  #   points << Geom::Point3d.new(100, 200, 0)
-  #   points << Geom::Point3d.new(0, 200, 0)
-  #   face = entities.add_face(points)
-  #   loop = face.outer_loop
-  #   edgeuses = loop.edgeuses
-  #   edgeuse = edgeuses[0]
-  #   face = edgeuse.face
-  #
-  # @return face - a Face object used by this edge use
-  #
-  # @version SketchUp 6.0
-  def face
-  end
-
-  # The loop method is used to retrieve the loop for this edge use.
-  #
-  # @example
-  #   entities = Sketchup.active_model.active_entities
-  #   points = []
-  #   points << Geom::Point3d.new(0, 0, 0)
-  #   points << Geom::Point3d.new(100, 0, 0)
-  #   points << Geom::Point3d.new(100, 200, 0)
-  #   points << Geom::Point3d.new(0, 200, 0)
-  #   face = entities.add_face(points)
-  #   loop = face.outer_loop
-  #   edgeuses = loop.edgeuses
-  #   edgeuse = edgeuses[0]
-  #   loop = edgeuse.loop
-  #
-  # @return loop - a Loop object that contains this edge use.
-  #
-  # @version SketchUp 6.0
-  def loop
-  end
-
-  # The next method is used to retrieve the next edge use in a loop.
-  #
-  # @example
-  #   entities = Sketchup.active_model.active_entities
-  #   points = []
-  #   points << Geom::Point3d.new(0, 0, 0)
-  #   points << Geom::Point3d.new(100, 0, 0)
-  #   points << Geom::Point3d.new(100, 200, 0)
-  #   points << Geom::Point3d.new(0, 200, 0)
-  #   face = entities.add_face(points)
-  #   loop = face.outer_loop
-  #   edgeuses = loop.edgeuses
-  #   edgeuse = edgeuses[0]
-  #   next_edgeuse = edgeuse.next
-  #
-  # @return edgeuse - the next EdgeUse object in a loop
-  #
-  # @version SketchUp 6.0
-  def next
-  end
-
-  # The partners method is used to retrieve all of the partner edge uses that
-  # uses the same edge.
-  #
-  # @example
-  #   entities = Sketchup.active_model.active_entities
-  #   points1 = []
-  #   points1 << Geom::Point3d.new(0, 0, 0)
-  #   points1 << Geom::Point3d.new(100, 0, 0)
-  #   points1 << Geom::Point3d.new(100, 200, 0)
-  #   points1 << Geom::Point3d.new(0, 200, 0)
-  #   face1 = entities.add_face(points1)
-  #   points2 = []
-  #   points2 << Geom::Point3d.new(100, 0, 0)
-  #   points2 << Geom::Point3d.new(200, 0, 0)
-  #   points2 << Geom::Point3d.new(200, 200, 0)
-  #   points2 << Geom::Point3d.new(100, 200, 0)
-  #   face2 = entities.add_face(points2)
-  #   loop = face1.outer_loop
-  #   edgeuses = loop.edgeuses
-  #   edgeuse = edgeuses[1]
-  #   partners = edgeuse.partners
-  #
-  # @return array - an array of partner Edge Use objects.
-  #
-  # @version SketchUp 6.0
-  def partners
-  end
-
-  # The previous method is used to retrieve the previous edge use in a loop.
-  #
-  # @example
-  #   entities = Sketchup.active_model.active_entities
-  #   points = []
-  #   points << Geom::Point3d.new(0, 0, 0)
-  #   points << Geom::Point3d.new(100, 0, 0)
-  #   points << Geom::Point3d.new(100, 200, 0)
-  #   points << Geom::Point3d.new(0, 200, 0)
-  #   face = entities.add_face(points)
-  #   loop = face.outer_loop
-  #   edgeuses = loop.edgeuses
-  #   edgeuse = edgeuses[0]
-  #   previous_edgeuse = edgeuse.previous
-  #
-  # @return edgeuse - the previous Edge Use object in the loop
-  #
-  # @version SketchUp 6.0
-  def previous
-  end
-
-  # The reversed? method is used to determine if the edge direction is opposite
-  # of the edge use direction. The edge use direction is the same as the loop
-  # it belongs to.
-  #
-  # @example
-  #   entities = Sketchup.active_model.active_entities
-  #   points = []
-  #   points << Geom::Point3d.new(0, 0, 0)
-  #   points << Geom::Point3d.new(100, 0, 0)
-  #   points << Geom::Point3d.new(100, 200, 0)
-  #   points << Geom::Point3d.new(0, 200, 0)
-  #   face = entities.add_face(points)
-  #   loop = face.outer_loop
-  #   edgeuses = loop.edgeuses
-  #   edgeuse = edgeuses[0]
-  #   reversed = edgeuse.reversed?
-  #
-  # @return [Boolean] boolean - true if reversed, false if not reversed.
-  #
-  # @version SketchUp 6.0
-  def reversed?
-  end
-
-  # The start_vertex_normal method is used to retrieve the vertex normal for
-  # the start point of this edgeuse.
-  #
-  # @example
-  #   entities = Sketchup.active_model.active_entities
-  #   points = []
-  #   points << Geom::Point3d.new(0, 0, 0)
-  #   points << Geom::Point3d.new(100, 0, 0)
-  #   points << Geom::Point3d.new(100, 200, 0)
-  #   points << Geom::Point3d.new(0, 200, 0)
-  #   face = entities.add_face(points)
-  #   loop = face.outer_loop
-  #   edgeuses = loop.edgeuses
-  #   edgeuse = edgeuses[0]
-  #   vector3d = edgeuse.start_vertex_normal
-  #
-  # @return vector3d - a vector3d object if successful.
-  #
-  # @version SketchUp 6.0
-  def start_vertex_normal
-  end
-
-end
+# Copyright:: Copyright 2023 Trimble Inc.
+# License:: The MIT License (MIT)
+
+# The EdgeUse class defines how an Edge is used in the definition of a Face.
+#
+# @version SketchUp 6.0
+class Sketchup::EdgeUse < Sketchup::Entity
+
+  # Instance Methods
+
+  # The edge method is used to retrieve the edge for the edge use.
+  #
+  # @example
+  #   entities = Sketchup.active_model.active_entities
+  #   points = []
+  #   points << Geom::Point3d.new(0, 0, 0)
+  #   points << Geom::Point3d.new(100, 0, 0)
+  #   points << Geom::Point3d.new(100, 200, 0)
+  #   points << Geom::Point3d.new(0, 200, 0)
+  #   face = entities.add_face(points)
+  #   loop = face.outer_loop
+  #   edgeuses = loop.edgeuses
+  #   edgeuse = edgeuses[0]
+  #   edge = edgeuse.edge
+  #
+  # @return edge - an Edge object used by this edge use
+  #
+  # @version SketchUp 6.0
+  def edge
+  end
+
+  # The end_vertex_normal method is used to retrieve the vertex normal for the
+  # end point of this edgeuse.
+  #
+  # @example
+  #   entities = Sketchup.active_model.active_entities
+  #   points = []
+  #   points << Geom::Point3d.new(0, 0, 0)
+  #   points << Geom::Point3d.new(100, 0, 0)
+  #   points << Geom::Point3d.new(100, 200, 0)
+  #   points << Geom::Point3d.new(0, 200, 0)
+  #   face = entities.add_face(points)
+  #   loop = face.outer_loop
+  #   edgeuses = loop.edgeuses
+  #   edgeuse = edgeuses[0]
+  #   vector3d = edgeuse.end_vertex_normal
+  #
+  # @return vector3d - a vector3d object if successful.
+  #
+  # @version SketchUp 6.0
+  def end_vertex_normal
+  end
+
+  # The face method is used to retrieve the face used by this edge use.
+  #
+  # @example
+  #   entities = Sketchup.active_model.active_entities
+  #   points = []
+  #   points << Geom::Point3d.new(0, 0, 0)
+  #   points << Geom::Point3d.new(100, 0, 0)
+  #   points << Geom::Point3d.new(100, 200, 0)
+  #   points << Geom::Point3d.new(0, 200, 0)
+  #   face = entities.add_face(points)
+  #   loop = face.outer_loop
+  #   edgeuses = loop.edgeuses
+  #   edgeuse = edgeuses[0]
+  #   face = edgeuse.face
+  #
+  # @return face - a Face object used by this edge use
+  #
+  # @version SketchUp 6.0
+  def face
+  end
+
+  # The loop method is used to retrieve the loop for this edge use.
+  #
+  # @example
+  #   entities = Sketchup.active_model.active_entities
+  #   points = []
+  #   points << Geom::Point3d.new(0, 0, 0)
+  #   points << Geom::Point3d.new(100, 0, 0)
+  #   points << Geom::Point3d.new(100, 200, 0)
+  #   points << Geom::Point3d.new(0, 200, 0)
+  #   face = entities.add_face(points)
+  #   loop = face.outer_loop
+  #   edgeuses = loop.edgeuses
+  #   edgeuse = edgeuses[0]
+  #   loop = edgeuse.loop
+  #
+  # @return loop - a Loop object that contains this edge use.
+  #
+  # @version SketchUp 6.0
+  def loop
+  end
+
+  # The next method is used to retrieve the next edge use in a loop.
+  #
+  # @example
+  #   entities = Sketchup.active_model.active_entities
+  #   points = []
+  #   points << Geom::Point3d.new(0, 0, 0)
+  #   points << Geom::Point3d.new(100, 0, 0)
+  #   points << Geom::Point3d.new(100, 200, 0)
+  #   points << Geom::Point3d.new(0, 200, 0)
+  #   face = entities.add_face(points)
+  #   loop = face.outer_loop
+  #   edgeuses = loop.edgeuses
+  #   edgeuse = edgeuses[0]
+  #   next_edgeuse = edgeuse.next
+  #
+  # @return edgeuse - the next EdgeUse object in a loop
+  #
+  # @version SketchUp 6.0
+  def next
+  end
+
+  # The partners method is used to retrieve all of the partner edge uses that
+  # uses the same edge.
+  #
+  # @example
+  #   entities = Sketchup.active_model.active_entities
+  #   points1 = []
+  #   points1 << Geom::Point3d.new(0, 0, 0)
+  #   points1 << Geom::Point3d.new(100, 0, 0)
+  #   points1 << Geom::Point3d.new(100, 200, 0)
+  #   points1 << Geom::Point3d.new(0, 200, 0)
+  #   face1 = entities.add_face(points1)
+  #   points2 = []
+  #   points2 << Geom::Point3d.new(100, 0, 0)
+  #   points2 << Geom::Point3d.new(200, 0, 0)
+  #   points2 << Geom::Point3d.new(200, 200, 0)
+  #   points2 << Geom::Point3d.new(100, 200, 0)
+  #   face2 = entities.add_face(points2)
+  #   loop = face1.outer_loop
+  #   edgeuses = loop.edgeuses
+  #   edgeuse = edgeuses[1]
+  #   partners = edgeuse.partners
+  #
+  # @return array - an array of partner Edge Use objects.
+  #
+  # @version SketchUp 6.0
+  def partners
+  end
+
+  # The previous method is used to retrieve the previous edge use in a loop.
+  #
+  # @example
+  #   entities = Sketchup.active_model.active_entities
+  #   points = []
+  #   points << Geom::Point3d.new(0, 0, 0)
+  #   points << Geom::Point3d.new(100, 0, 0)
+  #   points << Geom::Point3d.new(100, 200, 0)
+  #   points << Geom::Point3d.new(0, 200, 0)
+  #   face = entities.add_face(points)
+  #   loop = face.outer_loop
+  #   edgeuses = loop.edgeuses
+  #   edgeuse = edgeuses[0]
+  #   previous_edgeuse = edgeuse.previous
+  #
+  # @return edgeuse - the previous Edge Use object in the loop
+  #
+  # @version SketchUp 6.0
+  def previous
+  end
+
+  # The reversed? method is used to determine if the edge direction is opposite
+  # of the edge use direction. The edge use direction is the same as the loop
+  # it belongs to.
+  #
+  # @example
+  #   entities = Sketchup.active_model.active_entities
+  #   points = []
+  #   points << Geom::Point3d.new(0, 0, 0)
+  #   points << Geom::Point3d.new(100, 0, 0)
+  #   points << Geom::Point3d.new(100, 200, 0)
+  #   points << Geom::Point3d.new(0, 200, 0)
+  #   face = entities.add_face(points)
+  #   loop = face.outer_loop
+  #   edgeuses = loop.edgeuses
+  #   edgeuse = edgeuses[0]
+  #   reversed = edgeuse.reversed?
+  #
+  # @return [Boolean] boolean - true if reversed, false if not reversed.
+  #
+  # @version SketchUp 6.0
+  def reversed?
+  end
+
+  # The start_vertex_normal method is used to retrieve the vertex normal for
+  # the start point of this edgeuse.
+  #
+  # @example
+  #   entities = Sketchup.active_model.active_entities
+  #   points = []
+  #   points << Geom::Point3d.new(0, 0, 0)
+  #   points << Geom::Point3d.new(100, 0, 0)
+  #   points << Geom::Point3d.new(100, 200, 0)
+  #   points << Geom::Point3d.new(0, 200, 0)
+  #   face = entities.add_face(points)
+  #   loop = face.outer_loop
+  #   edgeuses = loop.edgeuses
+  #   edgeuse = edgeuses[0]
+  #   vector3d = edgeuse.start_vertex_normal
+  #
+  # @return vector3d - a vector3d object if successful.
+  #
+  # @version SketchUp 6.0
+  def start_vertex_normal
+  end
+
+end