sketchup-api-stubs 0.6.1 → 0.7.4

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
Files changed (149) hide show
  1. checksums.yaml +4 -4
  2. data/.yardopts +2 -0
  3. data/lib/sketchup-api-stubs.rb +1 -1
  4. data/lib/sketchup-api-stubs/sketchup.rb +145 -145
  5. data/lib/sketchup-api-stubs/stubs/Geom/BoundingBox.rb +318 -318
  6. data/lib/sketchup-api-stubs/stubs/Geom/Bounds2d.rb +172 -172
  7. data/lib/sketchup-api-stubs/stubs/Geom/LatLong.rb +126 -126
  8. data/lib/sketchup-api-stubs/stubs/Geom/OrientedBounds2d.rb +102 -102
  9. data/lib/sketchup-api-stubs/stubs/Geom/Point2d.rb +400 -401
  10. data/lib/sketchup-api-stubs/stubs/Geom/Point3d.rb +661 -661
  11. data/lib/sketchup-api-stubs/stubs/Geom/PolygonMesh.rb +492 -492
  12. data/lib/sketchup-api-stubs/stubs/Geom/Transformation.rb +478 -478
  13. data/lib/sketchup-api-stubs/stubs/Geom/Transformation2d.rb +263 -263
  14. data/lib/sketchup-api-stubs/stubs/Geom/UTM.rb +141 -141
  15. data/lib/sketchup-api-stubs/stubs/Geom/Vector2d.rb +522 -523
  16. data/lib/sketchup-api-stubs/stubs/Geom/Vector3d.rb +691 -691
  17. data/lib/sketchup-api-stubs/stubs/Layout.rb +25 -25
  18. data/lib/sketchup-api-stubs/stubs/Layout/AngularDimension.rb +573 -569
  19. data/lib/sketchup-api-stubs/stubs/Layout/AutoTextDefinition.rb +411 -411
  20. data/lib/sketchup-api-stubs/stubs/Layout/AutoTextDefinitions.rb +174 -186
  21. data/lib/sketchup-api-stubs/stubs/Layout/ConnectionPoint.rb +70 -70
  22. data/lib/sketchup-api-stubs/stubs/Layout/Document.rb +514 -455
  23. data/lib/sketchup-api-stubs/stubs/Layout/Ellipse.rb +29 -29
  24. data/lib/sketchup-api-stubs/stubs/Layout/Entities.rb +143 -155
  25. data/lib/sketchup-api-stubs/stubs/Layout/Entity.rb +353 -359
  26. data/lib/sketchup-api-stubs/stubs/Layout/FormattedText.rb +349 -349
  27. data/lib/sketchup-api-stubs/stubs/Layout/Grid.rb +311 -123
  28. data/lib/sketchup-api-stubs/stubs/Layout/Group.rb +261 -261
  29. data/lib/sketchup-api-stubs/stubs/Layout/Image.rb +91 -86
  30. data/lib/sketchup-api-stubs/stubs/Layout/Label.rb +371 -371
  31. data/lib/sketchup-api-stubs/stubs/Layout/Layer.rb +218 -218
  32. data/lib/sketchup-api-stubs/stubs/Layout/LayerInstance.rb +128 -128
  33. data/lib/sketchup-api-stubs/stubs/Layout/Layers.rb +220 -232
  34. data/lib/sketchup-api-stubs/stubs/Layout/LinearDimension.rb +567 -563
  35. data/lib/sketchup-api-stubs/stubs/Layout/LockedEntityError.rb +10 -10
  36. data/lib/sketchup-api-stubs/stubs/Layout/LockedLayerError.rb +11 -11
  37. data/lib/sketchup-api-stubs/stubs/Layout/Page.rb +183 -183
  38. data/lib/sketchup-api-stubs/stubs/Layout/PageInfo.rb +387 -387
  39. data/lib/sketchup-api-stubs/stubs/Layout/Pages.rb +204 -216
  40. data/lib/sketchup-api-stubs/stubs/Layout/Path.rb +344 -344
  41. data/lib/sketchup-api-stubs/stubs/Layout/Rectangle.rb +174 -174
  42. data/lib/sketchup-api-stubs/stubs/Layout/SketchUpModel.rb +694 -547
  43. data/lib/sketchup-api-stubs/stubs/Layout/Style.rb +1519 -1519
  44. data/lib/sketchup-api-stubs/stubs/Layout/Table.rb +290 -290
  45. data/lib/sketchup-api-stubs/stubs/Layout/TableCell.rb +149 -149
  46. data/lib/sketchup-api-stubs/stubs/Layout/TableColumn.rb +139 -139
  47. data/lib/sketchup-api-stubs/stubs/Layout/TableRow.rb +135 -135
  48. data/lib/sketchup-api-stubs/stubs/Sketchup/Animation.rb +140 -140
  49. data/lib/sketchup-api-stubs/stubs/Sketchup/AppObserver.rb +157 -157
  50. data/lib/sketchup-api-stubs/stubs/Sketchup/ArcCurve.rb +209 -209
  51. data/lib/sketchup-api-stubs/stubs/Sketchup/AttributeDictionaries.rb +152 -152
  52. data/lib/sketchup-api-stubs/stubs/Sketchup/AttributeDictionary.rb +281 -281
  53. data/lib/sketchup-api-stubs/stubs/Sketchup/Axes.rb +149 -149
  54. data/lib/sketchup-api-stubs/stubs/Sketchup/Behavior.rb +328 -328
  55. data/lib/sketchup-api-stubs/stubs/Sketchup/Camera.rb +577 -577
  56. data/lib/sketchup-api-stubs/stubs/Sketchup/ClassificationSchema.rb +63 -63
  57. data/lib/sketchup-api-stubs/stubs/Sketchup/Classifications.rb +122 -122
  58. data/lib/sketchup-api-stubs/stubs/Sketchup/Color.rb +281 -281
  59. data/lib/sketchup-api-stubs/stubs/Sketchup/ComponentDefinition.rb +562 -554
  60. data/lib/sketchup-api-stubs/stubs/Sketchup/ComponentInstance.rb +593 -593
  61. data/lib/sketchup-api-stubs/stubs/Sketchup/Console.rb +76 -76
  62. data/lib/sketchup-api-stubs/stubs/Sketchup/ConstructionLine.rb +257 -257
  63. data/lib/sketchup-api-stubs/stubs/Sketchup/ConstructionPoint.rb +32 -32
  64. data/lib/sketchup-api-stubs/stubs/Sketchup/Curve.rb +194 -194
  65. data/lib/sketchup-api-stubs/stubs/Sketchup/DefinitionList.rb +329 -329
  66. data/lib/sketchup-api-stubs/stubs/Sketchup/DefinitionObserver.rb +72 -72
  67. data/lib/sketchup-api-stubs/stubs/Sketchup/DefinitionsObserver.rb +102 -102
  68. data/lib/sketchup-api-stubs/stubs/Sketchup/Dimension.rb +165 -165
  69. data/lib/sketchup-api-stubs/stubs/Sketchup/DimensionLinear.rb +312 -312
  70. data/lib/sketchup-api-stubs/stubs/Sketchup/DimensionObserver.rb +38 -38
  71. data/lib/sketchup-api-stubs/stubs/Sketchup/DimensionRadial.rb +87 -87
  72. data/lib/sketchup-api-stubs/stubs/Sketchup/Drawingelement.rb +390 -390
  73. data/lib/sketchup-api-stubs/stubs/Sketchup/Edge.rb +508 -508
  74. data/lib/sketchup-api-stubs/stubs/Sketchup/EdgeUse.rb +211 -211
  75. data/lib/sketchup-api-stubs/stubs/Sketchup/Entities.rb +1119 -1097
  76. data/lib/sketchup-api-stubs/stubs/Sketchup/EntitiesObserver.rb +125 -125
  77. data/lib/sketchup-api-stubs/stubs/Sketchup/Entity.rb +544 -537
  78. data/lib/sketchup-api-stubs/stubs/Sketchup/EntityObserver.rb +59 -59
  79. data/lib/sketchup-api-stubs/stubs/Sketchup/ExtensionsManager.rb +125 -125
  80. data/lib/sketchup-api-stubs/stubs/Sketchup/Face.rb +750 -750
  81. data/lib/sketchup-api-stubs/stubs/Sketchup/FrameChangeObserver.rb +104 -104
  82. data/lib/sketchup-api-stubs/stubs/Sketchup/Group.rb +697 -697
  83. data/lib/sketchup-api-stubs/stubs/Sketchup/Http.rb +27 -27
  84. data/lib/sketchup-api-stubs/stubs/Sketchup/Http/Request.rb +285 -285
  85. data/lib/sketchup-api-stubs/stubs/Sketchup/Http/Response.rb +62 -62
  86. data/lib/sketchup-api-stubs/stubs/Sketchup/Image.rb +409 -409
  87. data/lib/sketchup-api-stubs/stubs/Sketchup/ImageRep.rb +226 -226
  88. data/lib/sketchup-api-stubs/stubs/Sketchup/Importer.rb +190 -190
  89. data/lib/sketchup-api-stubs/stubs/Sketchup/InputPoint.rb +393 -393
  90. data/lib/sketchup-api-stubs/stubs/Sketchup/InstanceObserver.rb +82 -82
  91. data/lib/sketchup-api-stubs/stubs/Sketchup/InstancePath.rb +303 -303
  92. data/lib/sketchup-api-stubs/stubs/Sketchup/Layer.rb +285 -262
  93. data/lib/sketchup-api-stubs/stubs/Sketchup/Layers.rb +244 -231
  94. data/lib/sketchup-api-stubs/stubs/Sketchup/LayersObserver.rb +136 -136
  95. data/lib/sketchup-api-stubs/stubs/Sketchup/Licensing.rb +48 -48
  96. data/lib/sketchup-api-stubs/stubs/Sketchup/Licensing/ExtensionLicense.rb +86 -86
  97. data/lib/sketchup-api-stubs/stubs/Sketchup/LineStyle.rb +24 -24
  98. data/lib/sketchup-api-stubs/stubs/Sketchup/LineStyles.rb +112 -123
  99. data/lib/sketchup-api-stubs/stubs/Sketchup/Loop.rb +137 -137
  100. data/lib/sketchup-api-stubs/stubs/Sketchup/Material.rb +416 -416
  101. data/lib/sketchup-api-stubs/stubs/Sketchup/Materials.rb +311 -311
  102. data/lib/sketchup-api-stubs/stubs/Sketchup/MaterialsObserver.rb +141 -141
  103. data/lib/sketchup-api-stubs/stubs/Sketchup/Menu.rb +95 -95
  104. data/lib/sketchup-api-stubs/stubs/Sketchup/Model.rb +1638 -1483
  105. data/lib/sketchup-api-stubs/stubs/Sketchup/ModelObserver.rb +356 -356
  106. data/lib/sketchup-api-stubs/stubs/Sketchup/OptionsManager.rb +132 -132
  107. data/lib/sketchup-api-stubs/stubs/Sketchup/OptionsProvider.rb +284 -282
  108. data/lib/sketchup-api-stubs/stubs/Sketchup/OptionsProviderObserver.rb +58 -58
  109. data/lib/sketchup-api-stubs/stubs/Sketchup/Page.rb +770 -650
  110. data/lib/sketchup-api-stubs/stubs/Sketchup/Pages.rb +353 -353
  111. data/lib/sketchup-api-stubs/stubs/Sketchup/PagesObserver.rb +76 -76
  112. data/lib/sketchup-api-stubs/stubs/Sketchup/PickHelper.rb +456 -456
  113. data/lib/sketchup-api-stubs/stubs/Sketchup/RegionalSettings.rb +43 -43
  114. data/lib/sketchup-api-stubs/stubs/Sketchup/RenderingOptions.rb +364 -356
  115. data/lib/sketchup-api-stubs/stubs/Sketchup/RenderingOptionsObserver.rb +44 -44
  116. data/lib/sketchup-api-stubs/stubs/Sketchup/SectionPlane.rb +150 -150
  117. data/lib/sketchup-api-stubs/stubs/Sketchup/Selection.rb +454 -454
  118. data/lib/sketchup-api-stubs/stubs/Sketchup/SelectionObserver.rb +115 -115
  119. data/lib/sketchup-api-stubs/stubs/Sketchup/Set.rb +212 -212
  120. data/lib/sketchup-api-stubs/stubs/Sketchup/ShadowInfo.rb +257 -257
  121. data/lib/sketchup-api-stubs/stubs/Sketchup/ShadowInfoObserver.rb +57 -57
  122. data/lib/sketchup-api-stubs/stubs/Sketchup/Style.rb +69 -69
  123. data/lib/sketchup-api-stubs/stubs/Sketchup/Styles.rb +211 -211
  124. data/lib/sketchup-api-stubs/stubs/Sketchup/Text.rb +262 -262
  125. data/lib/sketchup-api-stubs/stubs/Sketchup/Texture.rb +225 -225
  126. data/lib/sketchup-api-stubs/stubs/Sketchup/TextureWriter.rb +237 -237
  127. data/lib/sketchup-api-stubs/stubs/Sketchup/Tool.rb +829 -829
  128. data/lib/sketchup-api-stubs/stubs/Sketchup/Tools.rb +132 -132
  129. data/lib/sketchup-api-stubs/stubs/Sketchup/ToolsObserver.rb +154 -154
  130. data/lib/sketchup-api-stubs/stubs/Sketchup/UVHelper.rb +61 -61
  131. data/lib/sketchup-api-stubs/stubs/Sketchup/Vertex.rb +142 -142
  132. data/lib/sketchup-api-stubs/stubs/Sketchup/View.rb +1301 -995
  133. data/lib/sketchup-api-stubs/stubs/Sketchup/ViewObserver.rb +43 -43
  134. data/lib/sketchup-api-stubs/stubs/UI/Command.rb +310 -310
  135. data/lib/sketchup-api-stubs/stubs/UI/HtmlDialog.rb +356 -356
  136. data/lib/sketchup-api-stubs/stubs/UI/Notification.rb +229 -229
  137. data/lib/sketchup-api-stubs/stubs/UI/Toolbar.rb +240 -240
  138. data/lib/sketchup-api-stubs/stubs/UI/WebDialog.rb +633 -633
  139. data/lib/sketchup-api-stubs/stubs/_top_level.rb +311 -303
  140. data/lib/sketchup-api-stubs/stubs/array.rb +741 -741
  141. data/lib/sketchup-api-stubs/stubs/geom.rb +348 -233
  142. data/lib/sketchup-api-stubs/stubs/languagehandler.rb +92 -92
  143. data/lib/sketchup-api-stubs/stubs/length.rb +278 -262
  144. data/lib/sketchup-api-stubs/stubs/numeric.rb +249 -249
  145. data/lib/sketchup-api-stubs/stubs/sketchup.rb +1310 -1310
  146. data/lib/sketchup-api-stubs/stubs/sketchupextension.rb +353 -353
  147. data/lib/sketchup-api-stubs/stubs/string.rb +24 -24
  148. data/lib/sketchup-api-stubs/stubs/ui.rb +667 -660
  149. metadata +2 -16
checksums.yaml CHANGED
@@ -1,7 +1,7 @@
1
1
  ---
2
2
  SHA256:
3
- metadata.gz: c426719410dbcc07ba7a434afb41fc22dd3e8aaedffc9192066eb334bc8c1aed
4
- data.tar.gz: 0b840332393dce9bf0534e4d32bd3cac7468b41cfcc8612142d83bbfeed42a5a
3
+ metadata.gz: d80d25ceaf3faf694381069ccd4eef63e9db39d84a5a452b2627aec15ef91e37
4
+ data.tar.gz: 05dab8e9506e895c2e424499b0736ad5db114430b6bb35aab084af77986ce9db
5
5
  SHA512:
6
- metadata.gz: 246d6ca37d6bbfeee612b25c1147755cd11e0eeecbc303ade8b3a09c5cb3808bcc1f9c6a175be434343f42f65eb00bfa269a423efbbdb9b1dbf67ddd663b9ce7
7
- data.tar.gz: 0c3a5160c05c964af0ba4604ae0637fdd3c480c4d39f28b4e2b8465d8b4effb380bf9403ef01a665abf63d3ecc2fd4adba7d2833fdd82d7f59946b9f7220982b
6
+ metadata.gz: 7b3f013a7eecc343b8559fd69c0d7852c852572f52813b713206e151360d89b0e9c06f6d9e3685508d3b635c6fa0909950a7b24faa69c2b6025b57bf932ed1b4
7
+ data.tar.gz: 50af3a3c516fee816cec20c877d3bdfb3e969ca6ce0fb6333b7dc52bb14c98ae0d35b3bb78520d9517b26f424f221611f613c94f775fc5a294d7c4412ea504a4
data/.yardopts CHANGED
@@ -1,7 +1,9 @@
1
1
  --title "SketchUp Ruby API Documentation"
2
2
  --no-api
3
3
  --no-private
4
+ --hide-api Internal
4
5
  --plugin yard-sketchup
6
+ --asset images:images
5
7
  lib/sketchup-api-stubs/stubs/**/*.rb
6
8
  -
7
9
  pages/*.md
@@ -1 +1 @@
1
- require 'sketchup-api-stubs/sketchup'
1
+ require 'sketchup-api-stubs/sketchup'
@@ -1,145 +1,145 @@
1
- # This file is auto-generated by the `thor stubs` command.
2
- require 'sketchup-api-stubs/stubs/_top_level.rb'
3
- require 'sketchup-api-stubs/stubs/Array.rb'
4
- require 'sketchup-api-stubs/stubs/Geom.rb'
5
- require 'sketchup-api-stubs/stubs/Geom/BoundingBox.rb'
6
- require 'sketchup-api-stubs/stubs/Geom/Bounds2d.rb'
7
- require 'sketchup-api-stubs/stubs/Geom/LatLong.rb'
8
- require 'sketchup-api-stubs/stubs/Geom/OrientedBounds2d.rb'
9
- require 'sketchup-api-stubs/stubs/Geom/Point2d.rb'
10
- require 'sketchup-api-stubs/stubs/Geom/Point3d.rb'
11
- require 'sketchup-api-stubs/stubs/Geom/PolygonMesh.rb'
12
- require 'sketchup-api-stubs/stubs/Geom/Transformation.rb'
13
- require 'sketchup-api-stubs/stubs/Geom/Transformation2d.rb'
14
- require 'sketchup-api-stubs/stubs/Geom/UTM.rb'
15
- require 'sketchup-api-stubs/stubs/Geom/Vector2d.rb'
16
- require 'sketchup-api-stubs/stubs/Geom/Vector3d.rb'
17
- require 'sketchup-api-stubs/stubs/LanguageHandler.rb'
18
- require 'sketchup-api-stubs/stubs/Layout.rb'
19
- require 'sketchup-api-stubs/stubs/Layout/Entity.rb'
20
- require 'sketchup-api-stubs/stubs/Layout/AngularDimension.rb'
21
- require 'sketchup-api-stubs/stubs/Layout/AutoTextDefinition.rb'
22
- require 'sketchup-api-stubs/stubs/Layout/AutoTextDefinitions.rb'
23
- require 'sketchup-api-stubs/stubs/Layout/ConnectionPoint.rb'
24
- require 'sketchup-api-stubs/stubs/Layout/Document.rb'
25
- require 'sketchup-api-stubs/stubs/Layout/Ellipse.rb'
26
- require 'sketchup-api-stubs/stubs/Layout/Entities.rb'
27
- require 'sketchup-api-stubs/stubs/Layout/FormattedText.rb'
28
- require 'sketchup-api-stubs/stubs/Layout/Grid.rb'
29
- require 'sketchup-api-stubs/stubs/Layout/Group.rb'
30
- require 'sketchup-api-stubs/stubs/Layout/Image.rb'
31
- require 'sketchup-api-stubs/stubs/Layout/Label.rb'
32
- require 'sketchup-api-stubs/stubs/Layout/Layer.rb'
33
- require 'sketchup-api-stubs/stubs/Layout/LayerInstance.rb'
34
- require 'sketchup-api-stubs/stubs/Layout/Layers.rb'
35
- require 'sketchup-api-stubs/stubs/Layout/LinearDimension.rb'
36
- require 'sketchup-api-stubs/stubs/Layout/LockedEntityError.rb'
37
- require 'sketchup-api-stubs/stubs/Layout/LockedLayerError.rb'
38
- require 'sketchup-api-stubs/stubs/Layout/Page.rb'
39
- require 'sketchup-api-stubs/stubs/Layout/PageInfo.rb'
40
- require 'sketchup-api-stubs/stubs/Layout/Pages.rb'
41
- require 'sketchup-api-stubs/stubs/Layout/Path.rb'
42
- require 'sketchup-api-stubs/stubs/Layout/Rectangle.rb'
43
- require 'sketchup-api-stubs/stubs/Layout/SketchUpModel.rb'
44
- require 'sketchup-api-stubs/stubs/Layout/Style.rb'
45
- require 'sketchup-api-stubs/stubs/Layout/Table.rb'
46
- require 'sketchup-api-stubs/stubs/Layout/TableCell.rb'
47
- require 'sketchup-api-stubs/stubs/Layout/TableColumn.rb'
48
- require 'sketchup-api-stubs/stubs/Layout/TableRow.rb'
49
- require 'sketchup-api-stubs/stubs/Length.rb'
50
- require 'sketchup-api-stubs/stubs/Numeric.rb'
51
- require 'sketchup-api-stubs/stubs/Sketchup.rb'
52
- require 'sketchup-api-stubs/stubs/Sketchup/Animation.rb'
53
- require 'sketchup-api-stubs/stubs/Sketchup/AppObserver.rb'
54
- require 'sketchup-api-stubs/stubs/Sketchup/Entity.rb'
55
- require 'sketchup-api-stubs/stubs/Sketchup/Curve.rb'
56
- require 'sketchup-api-stubs/stubs/Sketchup/ArcCurve.rb'
57
- require 'sketchup-api-stubs/stubs/Sketchup/AttributeDictionaries.rb'
58
- require 'sketchup-api-stubs/stubs/Sketchup/AttributeDictionary.rb'
59
- require 'sketchup-api-stubs/stubs/Sketchup/Axes.rb'
60
- require 'sketchup-api-stubs/stubs/Sketchup/Behavior.rb'
61
- require 'sketchup-api-stubs/stubs/Sketchup/Camera.rb'
62
- require 'sketchup-api-stubs/stubs/Sketchup/ClassificationSchema.rb'
63
- require 'sketchup-api-stubs/stubs/Sketchup/Classifications.rb'
64
- require 'sketchup-api-stubs/stubs/Sketchup/Color.rb'
65
- require 'sketchup-api-stubs/stubs/Sketchup/Drawingelement.rb'
66
- require 'sketchup-api-stubs/stubs/Sketchup/ComponentDefinition.rb'
67
- require 'sketchup-api-stubs/stubs/Sketchup/ComponentInstance.rb'
68
- require 'sketchup-api-stubs/stubs/Sketchup/Console.rb'
69
- require 'sketchup-api-stubs/stubs/Sketchup/ConstructionLine.rb'
70
- require 'sketchup-api-stubs/stubs/Sketchup/ConstructionPoint.rb'
71
- require 'sketchup-api-stubs/stubs/Sketchup/DefinitionList.rb'
72
- require 'sketchup-api-stubs/stubs/Sketchup/EntityObserver.rb'
73
- require 'sketchup-api-stubs/stubs/Sketchup/DefinitionObserver.rb'
74
- require 'sketchup-api-stubs/stubs/Sketchup/DefinitionsObserver.rb'
75
- require 'sketchup-api-stubs/stubs/Sketchup/Dimension.rb'
76
- require 'sketchup-api-stubs/stubs/Sketchup/DimensionLinear.rb'
77
- require 'sketchup-api-stubs/stubs/Sketchup/DimensionObserver.rb'
78
- require 'sketchup-api-stubs/stubs/Sketchup/DimensionRadial.rb'
79
- require 'sketchup-api-stubs/stubs/Sketchup/Edge.rb'
80
- require 'sketchup-api-stubs/stubs/Sketchup/EdgeUse.rb'
81
- require 'sketchup-api-stubs/stubs/Sketchup/Entities.rb'
82
- require 'sketchup-api-stubs/stubs/Sketchup/EntitiesObserver.rb'
83
- require 'sketchup-api-stubs/stubs/Sketchup/ExtensionsManager.rb'
84
- require 'sketchup-api-stubs/stubs/Sketchup/Face.rb'
85
- require 'sketchup-api-stubs/stubs/Sketchup/FrameChangeObserver.rb'
86
- require 'sketchup-api-stubs/stubs/Sketchup/Group.rb'
87
- require 'sketchup-api-stubs/stubs/Sketchup/Http.rb'
88
- require 'sketchup-api-stubs/stubs/Sketchup/Http/Request.rb'
89
- require 'sketchup-api-stubs/stubs/Sketchup/Http/Response.rb'
90
- require 'sketchup-api-stubs/stubs/Sketchup/Image.rb'
91
- require 'sketchup-api-stubs/stubs/Sketchup/ImageRep.rb'
92
- require 'sketchup-api-stubs/stubs/Sketchup/Importer.rb'
93
- require 'sketchup-api-stubs/stubs/Sketchup/InputPoint.rb'
94
- require 'sketchup-api-stubs/stubs/Sketchup/InstanceObserver.rb'
95
- require 'sketchup-api-stubs/stubs/Sketchup/InstancePath.rb'
96
- require 'sketchup-api-stubs/stubs/Sketchup/Layer.rb'
97
- require 'sketchup-api-stubs/stubs/Sketchup/Layers.rb'
98
- require 'sketchup-api-stubs/stubs/Sketchup/LayersObserver.rb'
99
- require 'sketchup-api-stubs/stubs/Sketchup/Licensing.rb'
100
- require 'sketchup-api-stubs/stubs/Sketchup/Licensing/ExtensionLicense.rb'
101
- require 'sketchup-api-stubs/stubs/Sketchup/LineStyle.rb'
102
- require 'sketchup-api-stubs/stubs/Sketchup/LineStyles.rb'
103
- require 'sketchup-api-stubs/stubs/Sketchup/Loop.rb'
104
- require 'sketchup-api-stubs/stubs/Sketchup/Material.rb'
105
- require 'sketchup-api-stubs/stubs/Sketchup/Materials.rb'
106
- require 'sketchup-api-stubs/stubs/Sketchup/MaterialsObserver.rb'
107
- require 'sketchup-api-stubs/stubs/Sketchup/Menu.rb'
108
- require 'sketchup-api-stubs/stubs/Sketchup/Model.rb'
109
- require 'sketchup-api-stubs/stubs/Sketchup/ModelObserver.rb'
110
- require 'sketchup-api-stubs/stubs/Sketchup/OptionsManager.rb'
111
- require 'sketchup-api-stubs/stubs/Sketchup/OptionsProvider.rb'
112
- require 'sketchup-api-stubs/stubs/Sketchup/OptionsProviderObserver.rb'
113
- require 'sketchup-api-stubs/stubs/Sketchup/Page.rb'
114
- require 'sketchup-api-stubs/stubs/Sketchup/Pages.rb'
115
- require 'sketchup-api-stubs/stubs/Sketchup/PagesObserver.rb'
116
- require 'sketchup-api-stubs/stubs/Sketchup/PickHelper.rb'
117
- require 'sketchup-api-stubs/stubs/Sketchup/RegionalSettings.rb'
118
- require 'sketchup-api-stubs/stubs/Sketchup/RenderingOptions.rb'
119
- require 'sketchup-api-stubs/stubs/Sketchup/RenderingOptionsObserver.rb'
120
- require 'sketchup-api-stubs/stubs/Sketchup/SectionPlane.rb'
121
- require 'sketchup-api-stubs/stubs/Sketchup/Selection.rb'
122
- require 'sketchup-api-stubs/stubs/Sketchup/SelectionObserver.rb'
123
- require 'sketchup-api-stubs/stubs/Sketchup/Set.rb'
124
- require 'sketchup-api-stubs/stubs/Sketchup/ShadowInfo.rb'
125
- require 'sketchup-api-stubs/stubs/Sketchup/ShadowInfoObserver.rb'
126
- require 'sketchup-api-stubs/stubs/Sketchup/Style.rb'
127
- require 'sketchup-api-stubs/stubs/Sketchup/Styles.rb'
128
- require 'sketchup-api-stubs/stubs/Sketchup/Text.rb'
129
- require 'sketchup-api-stubs/stubs/Sketchup/Texture.rb'
130
- require 'sketchup-api-stubs/stubs/Sketchup/TextureWriter.rb'
131
- require 'sketchup-api-stubs/stubs/Sketchup/Tool.rb'
132
- require 'sketchup-api-stubs/stubs/Sketchup/Tools.rb'
133
- require 'sketchup-api-stubs/stubs/Sketchup/ToolsObserver.rb'
134
- require 'sketchup-api-stubs/stubs/Sketchup/UVHelper.rb'
135
- require 'sketchup-api-stubs/stubs/Sketchup/Vertex.rb'
136
- require 'sketchup-api-stubs/stubs/Sketchup/View.rb'
137
- require 'sketchup-api-stubs/stubs/Sketchup/ViewObserver.rb'
138
- require 'sketchup-api-stubs/stubs/SketchupExtension.rb'
139
- require 'sketchup-api-stubs/stubs/String.rb'
140
- require 'sketchup-api-stubs/stubs/UI.rb'
141
- require 'sketchup-api-stubs/stubs/UI/Command.rb'
142
- require 'sketchup-api-stubs/stubs/UI/HtmlDialog.rb'
143
- require 'sketchup-api-stubs/stubs/UI/Notification.rb'
144
- require 'sketchup-api-stubs/stubs/UI/Toolbar.rb'
145
- require 'sketchup-api-stubs/stubs/UI/WebDialog.rb'
1
+ # This file is auto-generated by the `thor stubs` command.
2
+ require 'sketchup-api-stubs/stubs/_top_level.rb'
3
+ require 'sketchup-api-stubs/stubs/Array.rb'
4
+ require 'sketchup-api-stubs/stubs/Geom.rb'
5
+ require 'sketchup-api-stubs/stubs/Geom/BoundingBox.rb'
6
+ require 'sketchup-api-stubs/stubs/Geom/Bounds2d.rb'
7
+ require 'sketchup-api-stubs/stubs/Geom/LatLong.rb'
8
+ require 'sketchup-api-stubs/stubs/Geom/OrientedBounds2d.rb'
9
+ require 'sketchup-api-stubs/stubs/Geom/Point2d.rb'
10
+ require 'sketchup-api-stubs/stubs/Geom/Point3d.rb'
11
+ require 'sketchup-api-stubs/stubs/Geom/PolygonMesh.rb'
12
+ require 'sketchup-api-stubs/stubs/Geom/Transformation.rb'
13
+ require 'sketchup-api-stubs/stubs/Geom/Transformation2d.rb'
14
+ require 'sketchup-api-stubs/stubs/Geom/UTM.rb'
15
+ require 'sketchup-api-stubs/stubs/Geom/Vector2d.rb'
16
+ require 'sketchup-api-stubs/stubs/Geom/Vector3d.rb'
17
+ require 'sketchup-api-stubs/stubs/LanguageHandler.rb'
18
+ require 'sketchup-api-stubs/stubs/Layout.rb'
19
+ require 'sketchup-api-stubs/stubs/Layout/Entity.rb'
20
+ require 'sketchup-api-stubs/stubs/Layout/AngularDimension.rb'
21
+ require 'sketchup-api-stubs/stubs/Layout/AutoTextDefinition.rb'
22
+ require 'sketchup-api-stubs/stubs/Layout/AutoTextDefinitions.rb'
23
+ require 'sketchup-api-stubs/stubs/Layout/ConnectionPoint.rb'
24
+ require 'sketchup-api-stubs/stubs/Layout/Document.rb'
25
+ require 'sketchup-api-stubs/stubs/Layout/Ellipse.rb'
26
+ require 'sketchup-api-stubs/stubs/Layout/Entities.rb'
27
+ require 'sketchup-api-stubs/stubs/Layout/FormattedText.rb'
28
+ require 'sketchup-api-stubs/stubs/Layout/Grid.rb'
29
+ require 'sketchup-api-stubs/stubs/Layout/Group.rb'
30
+ require 'sketchup-api-stubs/stubs/Layout/Image.rb'
31
+ require 'sketchup-api-stubs/stubs/Layout/Label.rb'
32
+ require 'sketchup-api-stubs/stubs/Layout/Layer.rb'
33
+ require 'sketchup-api-stubs/stubs/Layout/LayerInstance.rb'
34
+ require 'sketchup-api-stubs/stubs/Layout/Layers.rb'
35
+ require 'sketchup-api-stubs/stubs/Layout/LinearDimension.rb'
36
+ require 'sketchup-api-stubs/stubs/Layout/LockedEntityError.rb'
37
+ require 'sketchup-api-stubs/stubs/Layout/LockedLayerError.rb'
38
+ require 'sketchup-api-stubs/stubs/Layout/Page.rb'
39
+ require 'sketchup-api-stubs/stubs/Layout/PageInfo.rb'
40
+ require 'sketchup-api-stubs/stubs/Layout/Pages.rb'
41
+ require 'sketchup-api-stubs/stubs/Layout/Path.rb'
42
+ require 'sketchup-api-stubs/stubs/Layout/Rectangle.rb'
43
+ require 'sketchup-api-stubs/stubs/Layout/SketchUpModel.rb'
44
+ require 'sketchup-api-stubs/stubs/Layout/Style.rb'
45
+ require 'sketchup-api-stubs/stubs/Layout/Table.rb'
46
+ require 'sketchup-api-stubs/stubs/Layout/TableCell.rb'
47
+ require 'sketchup-api-stubs/stubs/Layout/TableColumn.rb'
48
+ require 'sketchup-api-stubs/stubs/Layout/TableRow.rb'
49
+ require 'sketchup-api-stubs/stubs/Length.rb'
50
+ require 'sketchup-api-stubs/stubs/Numeric.rb'
51
+ require 'sketchup-api-stubs/stubs/Sketchup.rb'
52
+ require 'sketchup-api-stubs/stubs/Sketchup/Animation.rb'
53
+ require 'sketchup-api-stubs/stubs/Sketchup/AppObserver.rb'
54
+ require 'sketchup-api-stubs/stubs/Sketchup/Entity.rb'
55
+ require 'sketchup-api-stubs/stubs/Sketchup/Curve.rb'
56
+ require 'sketchup-api-stubs/stubs/Sketchup/ArcCurve.rb'
57
+ require 'sketchup-api-stubs/stubs/Sketchup/AttributeDictionaries.rb'
58
+ require 'sketchup-api-stubs/stubs/Sketchup/AttributeDictionary.rb'
59
+ require 'sketchup-api-stubs/stubs/Sketchup/Axes.rb'
60
+ require 'sketchup-api-stubs/stubs/Sketchup/Behavior.rb'
61
+ require 'sketchup-api-stubs/stubs/Sketchup/Camera.rb'
62
+ require 'sketchup-api-stubs/stubs/Sketchup/ClassificationSchema.rb'
63
+ require 'sketchup-api-stubs/stubs/Sketchup/Classifications.rb'
64
+ require 'sketchup-api-stubs/stubs/Sketchup/Color.rb'
65
+ require 'sketchup-api-stubs/stubs/Sketchup/Drawingelement.rb'
66
+ require 'sketchup-api-stubs/stubs/Sketchup/ComponentDefinition.rb'
67
+ require 'sketchup-api-stubs/stubs/Sketchup/ComponentInstance.rb'
68
+ require 'sketchup-api-stubs/stubs/Sketchup/Console.rb'
69
+ require 'sketchup-api-stubs/stubs/Sketchup/ConstructionLine.rb'
70
+ require 'sketchup-api-stubs/stubs/Sketchup/ConstructionPoint.rb'
71
+ require 'sketchup-api-stubs/stubs/Sketchup/DefinitionList.rb'
72
+ require 'sketchup-api-stubs/stubs/Sketchup/EntityObserver.rb'
73
+ require 'sketchup-api-stubs/stubs/Sketchup/DefinitionObserver.rb'
74
+ require 'sketchup-api-stubs/stubs/Sketchup/DefinitionsObserver.rb'
75
+ require 'sketchup-api-stubs/stubs/Sketchup/Dimension.rb'
76
+ require 'sketchup-api-stubs/stubs/Sketchup/DimensionLinear.rb'
77
+ require 'sketchup-api-stubs/stubs/Sketchup/DimensionObserver.rb'
78
+ require 'sketchup-api-stubs/stubs/Sketchup/DimensionRadial.rb'
79
+ require 'sketchup-api-stubs/stubs/Sketchup/Edge.rb'
80
+ require 'sketchup-api-stubs/stubs/Sketchup/EdgeUse.rb'
81
+ require 'sketchup-api-stubs/stubs/Sketchup/Entities.rb'
82
+ require 'sketchup-api-stubs/stubs/Sketchup/EntitiesObserver.rb'
83
+ require 'sketchup-api-stubs/stubs/Sketchup/ExtensionsManager.rb'
84
+ require 'sketchup-api-stubs/stubs/Sketchup/Face.rb'
85
+ require 'sketchup-api-stubs/stubs/Sketchup/FrameChangeObserver.rb'
86
+ require 'sketchup-api-stubs/stubs/Sketchup/Group.rb'
87
+ require 'sketchup-api-stubs/stubs/Sketchup/Http.rb'
88
+ require 'sketchup-api-stubs/stubs/Sketchup/Http/Request.rb'
89
+ require 'sketchup-api-stubs/stubs/Sketchup/Http/Response.rb'
90
+ require 'sketchup-api-stubs/stubs/Sketchup/Image.rb'
91
+ require 'sketchup-api-stubs/stubs/Sketchup/ImageRep.rb'
92
+ require 'sketchup-api-stubs/stubs/Sketchup/Importer.rb'
93
+ require 'sketchup-api-stubs/stubs/Sketchup/InputPoint.rb'
94
+ require 'sketchup-api-stubs/stubs/Sketchup/InstanceObserver.rb'
95
+ require 'sketchup-api-stubs/stubs/Sketchup/InstancePath.rb'
96
+ require 'sketchup-api-stubs/stubs/Sketchup/Layer.rb'
97
+ require 'sketchup-api-stubs/stubs/Sketchup/Layers.rb'
98
+ require 'sketchup-api-stubs/stubs/Sketchup/LayersObserver.rb'
99
+ require 'sketchup-api-stubs/stubs/Sketchup/Licensing.rb'
100
+ require 'sketchup-api-stubs/stubs/Sketchup/Licensing/ExtensionLicense.rb'
101
+ require 'sketchup-api-stubs/stubs/Sketchup/LineStyle.rb'
102
+ require 'sketchup-api-stubs/stubs/Sketchup/LineStyles.rb'
103
+ require 'sketchup-api-stubs/stubs/Sketchup/Loop.rb'
104
+ require 'sketchup-api-stubs/stubs/Sketchup/Material.rb'
105
+ require 'sketchup-api-stubs/stubs/Sketchup/Materials.rb'
106
+ require 'sketchup-api-stubs/stubs/Sketchup/MaterialsObserver.rb'
107
+ require 'sketchup-api-stubs/stubs/Sketchup/Menu.rb'
108
+ require 'sketchup-api-stubs/stubs/Sketchup/Model.rb'
109
+ require 'sketchup-api-stubs/stubs/Sketchup/ModelObserver.rb'
110
+ require 'sketchup-api-stubs/stubs/Sketchup/OptionsManager.rb'
111
+ require 'sketchup-api-stubs/stubs/Sketchup/OptionsProvider.rb'
112
+ require 'sketchup-api-stubs/stubs/Sketchup/OptionsProviderObserver.rb'
113
+ require 'sketchup-api-stubs/stubs/Sketchup/Page.rb'
114
+ require 'sketchup-api-stubs/stubs/Sketchup/Pages.rb'
115
+ require 'sketchup-api-stubs/stubs/Sketchup/PagesObserver.rb'
116
+ require 'sketchup-api-stubs/stubs/Sketchup/PickHelper.rb'
117
+ require 'sketchup-api-stubs/stubs/Sketchup/RegionalSettings.rb'
118
+ require 'sketchup-api-stubs/stubs/Sketchup/RenderingOptions.rb'
119
+ require 'sketchup-api-stubs/stubs/Sketchup/RenderingOptionsObserver.rb'
120
+ require 'sketchup-api-stubs/stubs/Sketchup/SectionPlane.rb'
121
+ require 'sketchup-api-stubs/stubs/Sketchup/Selection.rb'
122
+ require 'sketchup-api-stubs/stubs/Sketchup/SelectionObserver.rb'
123
+ require 'sketchup-api-stubs/stubs/Sketchup/Set.rb'
124
+ require 'sketchup-api-stubs/stubs/Sketchup/ShadowInfo.rb'
125
+ require 'sketchup-api-stubs/stubs/Sketchup/ShadowInfoObserver.rb'
126
+ require 'sketchup-api-stubs/stubs/Sketchup/Style.rb'
127
+ require 'sketchup-api-stubs/stubs/Sketchup/Styles.rb'
128
+ require 'sketchup-api-stubs/stubs/Sketchup/Text.rb'
129
+ require 'sketchup-api-stubs/stubs/Sketchup/Texture.rb'
130
+ require 'sketchup-api-stubs/stubs/Sketchup/TextureWriter.rb'
131
+ require 'sketchup-api-stubs/stubs/Sketchup/Tool.rb'
132
+ require 'sketchup-api-stubs/stubs/Sketchup/Tools.rb'
133
+ require 'sketchup-api-stubs/stubs/Sketchup/ToolsObserver.rb'
134
+ require 'sketchup-api-stubs/stubs/Sketchup/UVHelper.rb'
135
+ require 'sketchup-api-stubs/stubs/Sketchup/Vertex.rb'
136
+ require 'sketchup-api-stubs/stubs/Sketchup/View.rb'
137
+ require 'sketchup-api-stubs/stubs/Sketchup/ViewObserver.rb'
138
+ require 'sketchup-api-stubs/stubs/SketchupExtension.rb'
139
+ require 'sketchup-api-stubs/stubs/String.rb'
140
+ require 'sketchup-api-stubs/stubs/UI.rb'
141
+ require 'sketchup-api-stubs/stubs/UI/Command.rb'
142
+ require 'sketchup-api-stubs/stubs/UI/HtmlDialog.rb'
143
+ require 'sketchup-api-stubs/stubs/UI/Notification.rb'
144
+ require 'sketchup-api-stubs/stubs/UI/Toolbar.rb'
145
+ require 'sketchup-api-stubs/stubs/UI/WebDialog.rb'
@@ -1,318 +1,318 @@
1
- # Copyright:: Copyright 2019 Trimble Inc.
2
- # License:: The MIT License (MIT)
3
-
4
- # Bounding boxes are three-dimensional boxes (eight corners), aligned with the
5
- # global axes, that surround entities within your model. There is a default
6
- # bounding box for any new model that will surround all entities,
7
- # including all groups and components. Additionally, there are
8
- # bounding boxes for Drawingelement objects, including components and groups.
9
- # Bounding boxes are only large enough to exactly bound the entities within
10
- # your model, group, or component.
11
- #
12
- # You can also create arbitrary BoundingBox objects by calling BoundingBox.new.
13
- #
14
- # @example
15
- # # You can get the bounding box on a model.
16
- # model = Sketchup.active_model
17
- # model_bb = model.bounds
18
- #
19
- # # Or you can get the bounding box on any Drawingelement object.
20
- # first_entity = model.entities[0]
21
- # first_entity_bb = first_entity.bounds
22
- #
23
- # # Or you can create an empty bounding box of your own.
24
- # boundingbox = Geom::BoundingBox.new
25
- #
26
- # @note that the bounding box returned for face-me components is the center of
27
- # its entire range of motion. This behavior changed in SketchUp 7.1. In 7.0
28
- # and earlier, the .bounds method would return the bounds around the
29
- # face-me component's current, visible center.
30
- #
31
- # @version SketchUp 6.0
32
- class Geom::BoundingBox
33
-
34
- # Instance Methods
35
-
36
- # The add method is used to add a point, vertex, or other bounding boxes to the
37
- # bounding box. The size of the bounding box will increase as necessary to
38
- # accommodate the new items.
39
- #
40
- # Adding one point to an empty bounding box does not increase the size of the
41
- # bounding box. You must add at least two points before methods such as
42
- # BoundingBox.diagonal will return a size greater than zero.
43
- #
44
- # @example
45
- # model = Sketchup.active_model
46
- # boundingbox = model.bounds
47
- # point1 = Geom::Point3d.new(100, 200, 300)
48
- # point2 = Geom::Point3d.new(200, 400, 200)
49
- # boundingbox.add(point1, point2)
50
- #
51
- # @overload add(point_or_bb)
52
- #
53
- # @param [Geom::Point3d, Geom::BoundingBox, Sketchup::Vertex] point_or_bb
54
- #
55
- # @overload add(points_or_bb)
56
- #
57
- # @param [Array<Geom::Point3d, Geom::BoundingBox, Sketchup::Vertex>]
58
- # points_or_bb
59
- #
60
- # @return [Geom::BoundingBox]
61
- #
62
- # @version SketchUp 6.0
63
- def add(*args)
64
- end
65
-
66
- # The center method is used to retrieve the Point3d object at the center of
67
- # the bounding box.
68
- #
69
- # @example
70
- # boundingbox = Geom::BoundingBox.new
71
- # boundingbox.add([100, 200, -400], [200, 400, 100])
72
- # # This will return a point Point3d(150, 300, -150).
73
- # point = boundingbox.center
74
- #
75
- # @return [Geom::Point3d] the Point3d at the center of the bounding box
76
- # if successful
77
- #
78
- # @version SketchUp 6.0
79
- def center
80
- end
81
-
82
- # The clear method is used to clear a bounding box.
83
- #
84
- # A cleared BoundingBox does not have a size greater than zero until you add
85
- # at least two points or another bounding box.
86
- #
87
- # @example
88
- # boundingbox = Geom::BoundingBox.new
89
- # boundingbox.add([100, 200, -400], [200, 400, 100])
90
- #
91
- # # This will return false.
92
- # boundingbox.empty?
93
- #
94
- # boundingbox.clear
95
- # # This will return true.
96
- # boundingbox.empty?
97
- #
98
- # @return [Geom::BoundingBox] the BoundingBox object which was cleared
99
- #
100
- # @version SketchUp 6.0
101
- def clear
102
- end
103
-
104
- # This method is used to determine if a bounding box contains a specific
105
- # Point3d or BoundingBox object.
106
- #
107
- # @example
108
- # boundingbox = Geom::BoundingBox.new
109
- # boundingbox.add([100, 200, -400], [200, 400, 100])
110
- # # This will return false.
111
- # boundingbox.contains?([300, 100, 400])
112
- # # This will return true.
113
- # boundingbox.contains?([150, 300, -200])
114
- #
115
- # @param [Geom::Point3d, Geom::BoundingBox] point_or_bb
116
- #
117
- # @return [Boolean]
118
- #
119
- # @version SketchUp 6.0
120
- def contains?(point_or_bb)
121
- end
122
-
123
- # The corner method is used to retrieve a point object at a specified corner
124
- # of the bounding box.
125
- #
126
- # There are 8 corners to a bounding box, identified by the numbers 0 through 7.
127
- # Points are returned in the currently set units (inches, by default). These
128
- # are which index refers to which corner:
129
- #
130
- # - 0 = [0, 0, 0] (left front bottom)
131
- # - 1 = [1, 0, 0] (right front bottom)
132
- # - 2 = [0, 1, 0] (left back bottom)
133
- # - 3 = [1, 1, 0] (right back bottom)
134
- # - 4 = [0, 0, 1] (left front top)
135
- # - 5 = [1, 0, 1] (right front top)
136
- # - 6 = [0, 1, 1] (left back top)
137
- # - 7 = [1, 1, 1] (right back top)
138
- #
139
- # @example
140
- # boundingbox = Geom::BoundingBox.new
141
- # boundingbox.add([100, 200, -400], [200, 400, 100])
142
- # # This will return Point3d(100, 200, -400).
143
- # boundingbox.corner(0)
144
- # # This will return Point3d(100, 200, -400).
145
- # boundingbox.corner(6)
146
- #
147
- # @param [Integer] corner_index
148
- # A number (from 0 to 7) representing point at the
149
- # corner you want to retrieve.
150
- #
151
- # @return [Geom::Point3d] a Point3d object if successful
152
- #
153
- # @version SketchUp 6.0
154
- def corner(corner_index)
155
- end
156
-
157
- # The {#depth} method is used to retrieve the depth of the bounding box.
158
- #
159
- # @example
160
- # boundingbox = Geom::BoundingBox.new
161
- # boundingbox.add([100, 200, -400], [200, 400, 100])
162
- # # This will return a Length of 500.0.
163
- # length = boundingbox.depth
164
- #
165
- # @return [Length] the depth of the bounding box
166
- #
167
- # @version SketchUp 6.0
168
- def depth
169
- end
170
-
171
- # The {#diagonal} method is used to get the length of the diagonal of the
172
- # bounding box.
173
- #
174
- # @example
175
- # boundingbox = Geom::BoundingBox.new
176
- # boundingbox.add([100, 200, -400], [200, 400, 100])
177
- # # This will return a point a Length of ~547.72.
178
- # length = boundingbox.diagonal
179
- #
180
- # @return [Length] the size of the diagonal for the bounding
181
- # box
182
- #
183
- # @version SketchUp 6.0
184
- def diagonal
185
- end
186
-
187
- # The empty? method is used to determine if a bounding box is empty (such as
188
- # if the bounds have not been set.) This returns the opposite of the valid?
189
- # method.
190
- #
191
- # @example
192
- # boundingbox = Geom::BoundingBox.new
193
- # boundingbox.add([100, 200, -400], [200, 400, 100])
194
- # # This will return false.
195
- # boundingbox.empty?
196
- #
197
- # @return [Boolean]
198
- #
199
- # @version SketchUp 6.0
200
- def empty?
201
- end
202
-
203
- # The {#height} method is used to retrieve the height of the bounding box.
204
- #
205
- # @example
206
- # boundingbox = Geom::BoundingBox.new
207
- # boundingbox.add([100, 200, -400], [200, 400, 100])
208
- # # This will return a Length of 200.0.
209
- # length = boundingbox.height
210
- #
211
- # @return [Length] the height of the bounding box
212
- #
213
- # @version SketchUp 6.0
214
- def height
215
- end
216
-
217
- # The new method is used to create a new, empty, bounding box.
218
- #
219
- # @example
220
- # boundingbox = Geom::BoundingBox.new
221
- #
222
- # @return [Geom::BoundingBox] a BoundingBox object if successful
223
- #
224
- # @version SketchUp 6.0
225
- def initialize
226
- end
227
-
228
- # The intersect method is used to retrieve a bounding box that is the result
229
- # of intersecting one bounding box with another.
230
- #
231
- # @example
232
- # boundingbox1 = Geom::BoundingBox.new
233
- # boundingbox1.add([100, 200, -400], [200, 400, 300])
234
- # boundingbox2 = Geom::BoundingBox.new
235
- # boundingbox2.add([150, 350, 100], [200, 400, 500])
236
- # # The returned boundingbox is a result of the intersection of the two.
237
- # boundingbox = boundingbox1.intersect(boundingbox2)
238
- #
239
- # @note Prior to SU2015 this method would return incorrect result in some
240
- # cases. For correct result in these versions you must first check if the
241
- # boundingboxes actually overlap - then call this to get the resulting
242
- # boundingbox.
243
- #
244
- # @param [Geom::BoundingBox] boundingbox
245
- # A second boundbox which might intersect boundingbox1.
246
- #
247
- # @return [Geom::BoundingBox] the resulting BoundingBox object if
248
- # successful, an empty BoundingBox object if unsuccessful.
249
- #
250
- # @version SketchUp 6.0
251
- def intersect(boundingbox)
252
- end
253
-
254
- # The max method is used to retrieve the Point3d object where x, y and z are
255
- # maximum in the bounding box.
256
- #
257
- # If you attempt to call the max method on an empty bounding box, you will
258
- # receive a very large negative number.
259
- #
260
- # @example
261
- # boundingbox = Geom::BoundingBox.new
262
- # boundingbox.add([100, 200, -400], [700, 900, 800], [200, 400, 100])
263
- # # This will return a point Point3d(700, 900, 800).
264
- # point = boundingbox.max
265
- #
266
- # @return [Geom::Point3d] a Point3d object representing the point where
267
- # x, y, and z are the maximum in the bounding box.
268
- #
269
- # @version SketchUp 6.0
270
- def max
271
- end
272
-
273
- # The min method is used to retrieve the Point3d where x, y and z are minimum
274
- # in the bounding box.
275
- #
276
- # @example
277
- # boundingbox = Geom::BoundingBox.new
278
- # boundingbox.add([100, 200, -400], [700, 900, 800], [200, 400, 100])
279
- # # This will return a point Point3d(100, 200, -400).
280
- # point = boundingbox.min
281
- #
282
- # @return [Geom::Point3d] a Point3d object representing the point where
283
- # x, y, and z are the maximum in the bounding box.
284
- #
285
- # @version SketchUp 6.0
286
- def min
287
- end
288
-
289
- # The valid method is used to determine if a bounding box is valid (contains
290
- # points).
291
- #
292
- # @example
293
- # boundingbox = Geom::BoundingBox.new
294
- # boundingbox.add([100, 200, -400], [200, 400, 100])
295
- # # This will return true.
296
- # boundingbox.valid?
297
- #
298
- # @return [Boolean]
299
- #
300
- # @version SketchUp 6.0
301
- def valid?
302
- end
303
-
304
- # The {#width} method is used to retrieve the width of the bounding box.
305
- #
306
- # @example
307
- # boundingbox = Geom::BoundingBox.new
308
- # boundingbox.add([100, 200, -400], [200, 400, 100])
309
- # # This will return a Length of 100.0.
310
- # length = boundingbox.width
311
- #
312
- # @return [Length] the width of the bounding box
313
- #
314
- # @version SketchUp 6.0
315
- def width
316
- end
317
-
318
- end
1
+ # Copyright:: Copyright 2020 Trimble Inc.
2
+ # License:: The MIT License (MIT)
3
+
4
+ # Bounding boxes are three-dimensional boxes (eight corners), aligned with the
5
+ # global axes, that surround entities within your model. There is a default
6
+ # bounding box for any new model that will surround all entities,
7
+ # including all groups and components. Additionally, there are
8
+ # bounding boxes for Drawingelement objects, including components and groups.
9
+ # Bounding boxes are only large enough to exactly bound the entities within
10
+ # your model, group, or component.
11
+ #
12
+ # You can also create arbitrary BoundingBox objects by calling BoundingBox.new.
13
+ #
14
+ # @example
15
+ # # You can get the bounding box on a model.
16
+ # model = Sketchup.active_model
17
+ # model_bb = model.bounds
18
+ #
19
+ # # Or you can get the bounding box on any Drawingelement object.
20
+ # first_entity = model.entities[0]
21
+ # first_entity_bb = first_entity.bounds
22
+ #
23
+ # # Or you can create an empty bounding box of your own.
24
+ # boundingbox = Geom::BoundingBox.new
25
+ #
26
+ # @note that the bounding box returned for face-me components is the center of
27
+ # its entire range of motion. This behavior changed in SketchUp 7.1. In 7.0
28
+ # and earlier, the .bounds method would return the bounds around the
29
+ # face-me component's current, visible center.
30
+ #
31
+ # @version SketchUp 6.0
32
+ class Geom::BoundingBox
33
+
34
+ # Instance Methods
35
+
36
+ # The add method is used to add a point, vertex, or other bounding boxes to the
37
+ # bounding box. The size of the bounding box will increase as necessary to
38
+ # accommodate the new items.
39
+ #
40
+ # Adding one point to an empty bounding box does not increase the size of the
41
+ # bounding box. You must add at least two points before methods such as
42
+ # BoundingBox.diagonal will return a size greater than zero.
43
+ #
44
+ # @example
45
+ # model = Sketchup.active_model
46
+ # boundingbox = model.bounds
47
+ # point1 = Geom::Point3d.new(100, 200, 300)
48
+ # point2 = Geom::Point3d.new(200, 400, 200)
49
+ # boundingbox.add(point1, point2)
50
+ #
51
+ # @overload add(point_or_bb)
52
+ #
53
+ # @param [Geom::Point3d, Geom::BoundingBox, Sketchup::Vertex] point_or_bb
54
+ #
55
+ # @overload add(points_or_bb)
56
+ #
57
+ # @param [Array<Geom::Point3d, Geom::BoundingBox, Sketchup::Vertex>]
58
+ # points_or_bb
59
+ #
60
+ # @return [Geom::BoundingBox]
61
+ #
62
+ # @version SketchUp 6.0
63
+ def add(*args)
64
+ end
65
+
66
+ # The center method is used to retrieve the Point3d object at the center of
67
+ # the bounding box.
68
+ #
69
+ # @example
70
+ # boundingbox = Geom::BoundingBox.new
71
+ # boundingbox.add([100, 200, -400], [200, 400, 100])
72
+ # # This will return a point Point3d(150, 300, -150).
73
+ # point = boundingbox.center
74
+ #
75
+ # @return [Geom::Point3d] the Point3d at the center of the bounding box
76
+ # if successful
77
+ #
78
+ # @version SketchUp 6.0
79
+ def center
80
+ end
81
+
82
+ # The clear method is used to clear a bounding box.
83
+ #
84
+ # A cleared BoundingBox does not have a size greater than zero until you add
85
+ # at least two points or another bounding box.
86
+ #
87
+ # @example
88
+ # boundingbox = Geom::BoundingBox.new
89
+ # boundingbox.add([100, 200, -400], [200, 400, 100])
90
+ #
91
+ # # This will return false.
92
+ # boundingbox.empty?
93
+ #
94
+ # boundingbox.clear
95
+ # # This will return true.
96
+ # boundingbox.empty?
97
+ #
98
+ # @return [Geom::BoundingBox] the BoundingBox object which was cleared
99
+ #
100
+ # @version SketchUp 6.0
101
+ def clear
102
+ end
103
+
104
+ # This method is used to determine if a bounding box contains a specific
105
+ # Point3d or BoundingBox object.
106
+ #
107
+ # @example
108
+ # boundingbox = Geom::BoundingBox.new
109
+ # boundingbox.add([100, 200, -400], [200, 400, 100])
110
+ # # This will return false.
111
+ # boundingbox.contains?([300, 100, 400])
112
+ # # This will return true.
113
+ # boundingbox.contains?([150, 300, -200])
114
+ #
115
+ # @param [Geom::Point3d, Geom::BoundingBox] point_or_bb
116
+ #
117
+ # @return [Boolean]
118
+ #
119
+ # @version SketchUp 6.0
120
+ def contains?(point_or_bb)
121
+ end
122
+
123
+ # The corner method is used to retrieve a point object at a specified corner
124
+ # of the bounding box.
125
+ #
126
+ # There are 8 corners to a bounding box, identified by the numbers 0 through 7.
127
+ # Points are returned in the currently set units (inches, by default). These
128
+ # are which index refers to which corner:
129
+ #
130
+ # - 0 = [0, 0, 0] (left front bottom)
131
+ # - 1 = [1, 0, 0] (right front bottom)
132
+ # - 2 = [0, 1, 0] (left back bottom)
133
+ # - 3 = [1, 1, 0] (right back bottom)
134
+ # - 4 = [0, 0, 1] (left front top)
135
+ # - 5 = [1, 0, 1] (right front top)
136
+ # - 6 = [0, 1, 1] (left back top)
137
+ # - 7 = [1, 1, 1] (right back top)
138
+ #
139
+ # @example
140
+ # boundingbox = Geom::BoundingBox.new
141
+ # boundingbox.add([100, 200, -400], [200, 400, 100])
142
+ # # This will return Point3d(100, 200, -400).
143
+ # boundingbox.corner(0)
144
+ # # This will return Point3d(100, 200, -400).
145
+ # boundingbox.corner(6)
146
+ #
147
+ # @param [Integer] corner_index
148
+ # A number (from 0 to 7) representing point at the
149
+ # corner you want to retrieve.
150
+ #
151
+ # @return [Geom::Point3d] a Point3d object if successful
152
+ #
153
+ # @version SketchUp 6.0
154
+ def corner(corner_index)
155
+ end
156
+
157
+ # The {#depth} method is used to retrieve the depth of the bounding box.
158
+ #
159
+ # @example
160
+ # boundingbox = Geom::BoundingBox.new
161
+ # boundingbox.add([100, 200, -400], [200, 400, 100])
162
+ # # This will return a Length of 500.0.
163
+ # length = boundingbox.depth
164
+ #
165
+ # @return [Length] the depth of the bounding box
166
+ #
167
+ # @version SketchUp 6.0
168
+ def depth
169
+ end
170
+
171
+ # The {#diagonal} method is used to get the length of the diagonal of the
172
+ # bounding box.
173
+ #
174
+ # @example
175
+ # boundingbox = Geom::BoundingBox.new
176
+ # boundingbox.add([100, 200, -400], [200, 400, 100])
177
+ # # This will return a point a Length of ~547.72.
178
+ # length = boundingbox.diagonal
179
+ #
180
+ # @return [Length] the size of the diagonal for the bounding
181
+ # box
182
+ #
183
+ # @version SketchUp 6.0
184
+ def diagonal
185
+ end
186
+
187
+ # The empty? method is used to determine if a bounding box is empty (such as
188
+ # if the bounds have not been set.) This returns the opposite of the valid?
189
+ # method.
190
+ #
191
+ # @example
192
+ # boundingbox = Geom::BoundingBox.new
193
+ # boundingbox.add([100, 200, -400], [200, 400, 100])
194
+ # # This will return false.
195
+ # boundingbox.empty?
196
+ #
197
+ # @return [Boolean]
198
+ #
199
+ # @version SketchUp 6.0
200
+ def empty?
201
+ end
202
+
203
+ # The {#height} method is used to retrieve the height of the bounding box.
204
+ #
205
+ # @example
206
+ # boundingbox = Geom::BoundingBox.new
207
+ # boundingbox.add([100, 200, -400], [200, 400, 100])
208
+ # # This will return a Length of 200.0.
209
+ # length = boundingbox.height
210
+ #
211
+ # @return [Length] the height of the bounding box
212
+ #
213
+ # @version SketchUp 6.0
214
+ def height
215
+ end
216
+
217
+ # The new method is used to create a new, empty, bounding box.
218
+ #
219
+ # @example
220
+ # boundingbox = Geom::BoundingBox.new
221
+ #
222
+ # @return [Geom::BoundingBox] a BoundingBox object if successful
223
+ #
224
+ # @version SketchUp 6.0
225
+ def initialize
226
+ end
227
+
228
+ # The intersect method is used to retrieve a bounding box that is the result
229
+ # of intersecting one bounding box with another.
230
+ #
231
+ # @example
232
+ # boundingbox1 = Geom::BoundingBox.new
233
+ # boundingbox1.add([100, 200, -400], [200, 400, 300])
234
+ # boundingbox2 = Geom::BoundingBox.new
235
+ # boundingbox2.add([150, 350, 100], [200, 400, 500])
236
+ # # The returned boundingbox is a result of the intersection of the two.
237
+ # boundingbox = boundingbox1.intersect(boundingbox2)
238
+ #
239
+ # @note Prior to SU2015 this method would return incorrect result in some
240
+ # cases. For correct result in these versions you must first check if the
241
+ # boundingboxes actually overlap - then call this to get the resulting
242
+ # boundingbox.
243
+ #
244
+ # @param [Geom::BoundingBox] boundingbox
245
+ # A second boundbox which might intersect boundingbox1.
246
+ #
247
+ # @return [Geom::BoundingBox] the resulting BoundingBox object if
248
+ # successful, an empty BoundingBox object if unsuccessful.
249
+ #
250
+ # @version SketchUp 6.0
251
+ def intersect(boundingbox)
252
+ end
253
+
254
+ # The max method is used to retrieve the Point3d object where x, y and z are
255
+ # maximum in the bounding box.
256
+ #
257
+ # If you attempt to call the max method on an empty bounding box, you will
258
+ # receive a very large negative number.
259
+ #
260
+ # @example
261
+ # boundingbox = Geom::BoundingBox.new
262
+ # boundingbox.add([100, 200, -400], [700, 900, 800], [200, 400, 100])
263
+ # # This will return a point Point3d(700, 900, 800).
264
+ # point = boundingbox.max
265
+ #
266
+ # @return [Geom::Point3d] a Point3d object representing the point where
267
+ # x, y, and z are the maximum in the bounding box.
268
+ #
269
+ # @version SketchUp 6.0
270
+ def max
271
+ end
272
+
273
+ # The min method is used to retrieve the Point3d where x, y and z are minimum
274
+ # in the bounding box.
275
+ #
276
+ # @example
277
+ # boundingbox = Geom::BoundingBox.new
278
+ # boundingbox.add([100, 200, -400], [700, 900, 800], [200, 400, 100])
279
+ # # This will return a point Point3d(100, 200, -400).
280
+ # point = boundingbox.min
281
+ #
282
+ # @return [Geom::Point3d] a Point3d object representing the point where
283
+ # x, y, and z are the maximum in the bounding box.
284
+ #
285
+ # @version SketchUp 6.0
286
+ def min
287
+ end
288
+
289
+ # The valid method is used to determine if a bounding box is valid (contains
290
+ # points).
291
+ #
292
+ # @example
293
+ # boundingbox = Geom::BoundingBox.new
294
+ # boundingbox.add([100, 200, -400], [200, 400, 100])
295
+ # # This will return true.
296
+ # boundingbox.valid?
297
+ #
298
+ # @return [Boolean]
299
+ #
300
+ # @version SketchUp 6.0
301
+ def valid?
302
+ end
303
+
304
+ # The {#width} method is used to retrieve the width of the bounding box.
305
+ #
306
+ # @example
307
+ # boundingbox = Geom::BoundingBox.new
308
+ # boundingbox.add([100, 200, -400], [200, 400, 100])
309
+ # # This will return a Length of 100.0.
310
+ # length = boundingbox.width
311
+ #
312
+ # @return [Length] the width of the bounding box
313
+ #
314
+ # @version SketchUp 6.0
315
+ def width
316
+ end
317
+
318
+ end