sisimai 4.16.0-java

data/lib/sisimai/smtp.rb

@@ -0,0 +1,58 @@
+module Sisimai
+  # Sisimai::SMTP is a parent class of Sisimai::SMTP::Status and Sisimai::SMTP::Reply.
+  module SMTP
+    class << self
+      # Imported from p5-Sisimail/lib/Sisimai/SMTP.pm
+
+      # Check softbounce or not
+      # @param    [String] argv1    String including SMTP Status code
+      # @return   [True,False,Nil]  true:  Soft bounce
+      #                             false: Hard bounce
+      #                             nil: May not be bounce ?
+      def is_softbounce(argv1 = '')
+        return nil unless argv1
+        return nil unless argv1.size > 0
+
+        mesgstring = argv1.to_s
+        classvalue = nil
+        softbounce = -1
+
+        if cv = mesgstring.match(/\b([245])\d\d\b/)
+          # Valid SMTP reply code such as 550, 421
+          classvalue = cv[1].to_i
+
+        elsif cv = mesgstring.match(/\b([245])[.][0-9][.]\d+\b/)
+          # DSN value such as 5.1.1, 4.4.7
+          classvalue = cv[1].to_i
+        end
+
+        if classvalue == 4
+          # Soft bounce, Persistent transient error
+          softbounce = true
+
+        elsif classvalue == 5
+          # Hard bounce, Permanent error
+          softbounce = false
+        else
+          # Check with regular expression
+          if mesgstring =~ /(?:temporar|persistent)/i
+            # Temporary failure
+            softbounce = true
+
+          elsif mesgstring =~ /permanent/i
+            # Permanently failure
+            softbounce = false
+
+          else
+            # did not find information to decide that it is a soft bounce
+            # or a hard bounce.
+            softbounce = nil
+          end
+        end
+
+        return softbounce
+      end
+    end
+  end
+end
+

data/lib/sisimai/smtp/reply.rb

@@ -0,0 +1,84 @@
+# http://www.ietf.org/rfc/rfc5321.txt
+#   4.2.1.  Reply Code Severities and Theory
+#       2yz  Positive Completion reply
+#       3yz  Positive Intermediate reply
+#       4yz  Transient Negative Completion reply
+#       5yz  Permanent Negative Completion reply
+#
+#       x0z  Syntax: These replies refer to syntax errors, syntactically
+#            correct commands that do not fit any functional category, and
+#            unimplemented or superfluous commands.
+#       x1z  Information: These are replies to requests for information, such
+#            as status or help.
+#       x2z  Connections: These are replies referring to the transmission
+#            channel.
+#       x3z  Unspecified.
+#       x4z  Unspecified.
+#       x5z  Mail system: These replies indicate the status of the receiver
+#            mail system vis-a-vis the requested transfer or other mail system
+#            action.
+#
+#  4.2.3.  Reply Codes in Numeric Order
+#       211  System status, or system help reply
+#       214  Help message (Information on how to use the receiver or the
+#            meaning of a particular non-standard command; this reply is useful
+#            only to the human user)
+#       220  <domain> Service ready
+#       221  <domain> Service closing transmission channel
+#       250  Requested mail action okay, completed
+#       251  User not local; will forward to <forward-path> (See Section 3.4)
+#       252  Cannot VRFY user, but will accept message and attempt delivery
+#            (See Section 3.5.3)
+#       354  Start mail input; end with <CRLF>.<CRLF>
+#       421  <domain> Service not available, closing transmission channel
+#            (This may be a reply to any command if the service knows it must
+#            shut down)
+#       450  Requested mail action not taken: mailbox unavailable (e.g.,
+#            mailbox busy or temporarily blocked for policy reasons)
+#       451  Requested action aborted: local error in processing
+#       452  Requested action not taken: insufficient system storage
+#       455  Server unable to accommodate parameters
+#       500  Syntax error, command unrecognized (This may include errors such
+#            as command line too long)
+#       501  Syntax error in parameters or arguments
+#       502  Command not implemented (see Section 4.2.4)
+#       503  Bad sequence of commands
+#       504  Command parameter not implemented
+#       550  Requested action not taken: mailbox unavailable (e.g., mailbox
+#            not found, no access, or command rejected for policy reasons)
+#       551  User not local; please try <forward-path> (See Section 3.4)
+#       552  Requested mail action aborted: exceeded storage allocation
+#       553  Requested action not taken: mailbox name not allowed (e.g.,
+#            mailbox syntax incorrect)
+#       554  Transaction failed (Or, in the case of a connection-opening
+#            response, "No SMTP service here")
+#       555  MAIL FROM/RCPT TO parameters not recognized or not implemented
+#
+module Sisimai
+  module SMTP
+    # Sisimai::SMTP::Reply is utilities for getting SMTP Reply Code value from
+    # error message text.
+    module Reply
+      # Imported from p5-Sisimail/lib/Sisimai/SMTP/Reply.pm
+      class << self
+        # Get SMTP Reply Code from the given string
+        # @param    [String] argv1  String including SMTP Reply Code like 550
+        # @return   [String]        SMTP Reply Code or empty if the first argument
+        #                           did not include SMTP Reply Code value
+        def find(argv1 = '')
+          return '' unless argv1
+          return '' unless argv1.size > 0
+          return '' if argv1 =~ /X-Unix;/i
+
+          if cv = argv1.match(/\b([45][0-5][0-9])\b/) || cv = argv1.match(/\b(25[0-3])\b/)
+            # 550, 447, or 250
+            return cv[1]
+          else
+            return ''
+          end
+        end
+      end
+    end
+  end
+end
+

data/lib/sisimai/smtp/status.rb

@@ -0,0 +1,758 @@
+# http://www.iana.org/assignments/smtp-enhanced-status-codes/smtp-enhanced-status-codes.xhtml
+#
+# ------------------------------------------------------------------------------
+# [Class Sub-Codes]
+# 2.X.Y Success
+# 4.X.Y Persistent Transient Failure
+# 5.X.Y Permanent Failure
+#
+# ------------------------------------------------------------------------------
+# [Subject Sub-Codes]
+#
+# X.0.X --- Other or Undefined Status
+#           There is no additional subject information available.
+#
+# X.1.X --- Addressing Status
+#           The address status reports on the originator or destination address.
+#           It may include address syntax or validity.
+#           These errors can generally be corrected by the sender and retried.
+#
+# X.2.X --- Mailbox Status
+#           Mailbox status indicates that something having to do with the mailbox
+#           has caused this DSN. Mailbox issues are assumed to be under the general
+#           control of the recipient.
+#
+# X.3.X --- Mail System Status
+#           Mail system status indicates that something having to do with the
+#           destination system has caused this DSN. System issues are assumed to
+#           be under the general control of the destination system administrator.
+#
+# X.4.X --- Network and Routing Status
+#           The networking or routing codes report status about the delivery
+#           system itself. These system components include any necessary
+#           infrastructure such as directory and routing services. Network issues
+#           are assumed to be under the control of the destination or intermediate
+#           system administrator.
+#
+# X.5.X --- Mail Delivery Protocol Status
+#           The mail delivery protocol status codes report failures involving
+#           the message delivery protocol. These failures include the full range
+#           of problems resulting from implementation errors or an unreliable
+#           connection.
+#
+# X.6.X --- Message Content or Media Status
+#           The message content or media status codes report failures involving
+#           the content of the message. These codes report failures due to
+#           translation, transcoding, or otherwise unsupported message media.
+#           Message content or media issues are under the control of both the
+#           sender and the receiver, both of which must support a common set of
+#           supported content-types.
+#
+# X.7.X --- Security or Policy Status
+#           The security or policy status codes report failures involving policies
+#           such as per-recipient or per-host filtering and cryptographic operations.
+#           Security and policy status issues are assumed to be under the control
+#           of either or both the sender and recipient.
+#           Both the sender and recipient must permit the exchange of messages
+#           and arrange the exchange of necessary keys and certificates for
+#           cryptographic operations.
+#
+# ------------------------------------------------------------------------------
+# [Enumerated Status Codes]
+#
+# X.0.0  Any    Other undefined Status:(RFC 3463)
+#                 Other undefined status is the only undefined error code. It
+#                 should be used for all errors for which only the class of the
+#                 error is known.
+#
+# X.1.0  ---    Other address status:(RFC 3463)
+#                 Something about the address specified in the message caused
+#                 this DSN.
+#
+# X.1.1  451    Bad destination mailbox address:(RFC3463)
+#        550      The mailbox specified in the address does not exist.
+#                 For Internet mail names, this means the address portion to the
+#                 the left of the "@" sign is invalid.
+#                 This code is only useful for permanent failures.
+#
+# X.1.2  ---    Bad destination system addres:
+#                 The destination system specified in the address does not exist
+#                 or is incapable of accepting mail. For Internet mail names,
+#                 this means the address portion to the right of the "@" is
+#                 invalid for mail.
+#                 This code is only useful for permanent failures.
+#
+# X.1.3  501    Bad destination mailbox address syntax:
+#                 The destination address was syntactically invalid. This can
+#                 apply to any field in the address. This code is only useful
+#                 for permanent failures.
+#
+# X.1.4  ---    Destination mailbox address ambiguous:(RFC 3463)
+#                 The mailbox address as specified matches one or more recipients
+#                 on the destination system.
+#                 This may result if a heuristic address mapping algorithm is
+#                 used to map the specified address to a local mailbox name.
+#
+# X.1.5  250    Destination address valid:(RFC 3463)
+#                 This mailbox address as specified was valid. This status code
+#                 should be used for positive delivery reports.
+#
+# X.1.6  ---    Destination mailbox has moved, No forwarding address:(RFC 3463)
+#                 The mailbox address provided was at one time valid, but mail
+#                 is no longer being accepted for that address.
+#                 This code is only useful for permanent failures.
+#
+# X.1.7  ---    Bad sender's mailbox address syntax:(RFC 3463)
+#                 The sender's address was syntactically invalid. This can apply
+#                 to any field in the address.
+#
+# X.1.8  451    Bad sender's system address:(RFC 3463)
+#        501      The sender's system specified in the address does not exist or
+#                 is incapable of accepting return mail. For domain names, this
+#                 means the address portion to the right of the "@" is invalid
+#                 for mail.
+#
+# X.1.9  ---    Message relayed to non-compliant mailer:(RFC 5248, 3886)
+#                 The mailbox address specified was valid, but the message has
+#                 been relayed to a system that does not speak this protocol;
+#                 no further information can be provided.
+#
+# X.1.10 ---    Recipient address has null MX:(RFC 7505)
+#                 This status code is returned when the associated address is
+#                 marked as invalid using a null MX.
+# ------------------------------------------------------------------------------
+# X.2.0  ---    Other or undefined mailbox status:(RFC 3463)
+#                 The mailbox exists, but something about the destination mailbox
+#                 has caused the sending of this DSN.
+#
+# X.2.1  ---    Mailbox disabled, not accepting messages:(RFC 3463)
+#                 The mailbox exists, but is not accepting messages. This may be
+#                 a permanent error if the mailbox will never be re-enabled or a
+#                 transient error if the mailbox is only temporarily disabled.
+#
+# X.2.2  552    Mailbox full:(RFC 3463)
+#                 The mailbox is full because the user has exceeded a per-mailbox
+#                 administrative quota or physical capacity. The general semantics
+#                 implies that the recipient can delete messages to make more
+#                 space available.
+#                 This code should be used as a persistent transient failure.
+#
+# X.2.3  552    Message length exceeds administrative limit:(RFC 3463)
+#                 A per-mailbox administrative message length limit has been
+#                 exceeded. This status code should be used when the per-mailbox
+#                 message length limit is less than the general system limit.
+#                 This code should be used as a permanent failure.
+#
+# X.2.4  450    Mailing list expansion problem:(RFC 3463)
+#        452      The mailbox is a mailing list address and the mailing list was
+#                 unable to be expanded. This code may represent a permanent
+#                 failure or a persistent transient failure.
+# ------------------------------------------------------------------------------
+# X.3.0  221    Other or undefined mail system status:(RFC 3463)
+#        250      The destination system exists and normally accepts mail, but
+#        421,451  something about the system has caused the generation of this
+#        550,554  DSN.
+#
+# X.3.1  452    Mail system full:(RFC 3463)
+#                 Mail system storage has been exceeded. The general semantics
+#                 imply that the individual recipient may not be able to delete
+#                 material to make room for additional messages. This is useful
+#                 only as a persistent transient error.
+#
+# X.3.2  453    System not accepting network messages:(RFC 3463)
+#        521      The host on which the mailbox is resident is not accepting messages.
+#                 Examples of such conditions include an imminent shutdown, excessive
+#                 load, or system maintenance. This is useful for both permanent
+#                 and persistent transient errors.
+#
+# X.3.3  ---    System not capable of selected features:(RFC 3463)
+#                 Selected features specified for the message are not supported
+#                 by the destination system. This can occur in gateways when
+#                 features from one domain cannot be mapped onto the supported
+#                 feature in another.
+#
+# X.3.4  552    Message too big for system:(RFC 3463)
+#        554      The message is larger than per-message size limit. This limit
+#                 may either be for physical or administrative reasons. This is
+#                 useful only as a permanent error.
+#
+# X.3.5  ---    System incorrectly configured:(RFC 3463)
+#                 The system is not configured in a manner that will permit it
+#                 to accept this message.
+# ------------------------------------------------------------------------------
+# X.4.0  ---    Other or undefined network or routing status:(RFC 3463)
+#                 Something went wrong with the networking, but it is not clear
+#                 what the problem is, or the problem cannot be well expressed
+#                 with any of the other provided detail codes.
+#
+# X.4.1  451    No answer from host:(RFC 3463)
+#                 The outbound connection attempt was not answered, because either
+#                 the remote system was busy, or was unable to take a call.
+#                 This is useful only as a persistent transient error.
+#
+# X.4.2  421    Bad connection:(RFC 3463)
+#                 The outbound connection was established, but was unable to
+#                 complete the message transaction, either because of time-out,
+#                 or inadequate connection quality. This is useful only as a
+#                 persistent transient error.
+#
+# X.4.3  451    Directory server failure:(RFC 3463)
+#        550      The network system was unable to forward the message, because
+#                 a directory server was unavailable. This is useful only as a
+#                 persistent transient error. The inability to connect to an
+#                 Internet DNS server is one example of the directory server
+#                 failure error.
+#
+# X.4.4  ---    Unable to route:(RFC 3463)
+#                 The mail system was unable to determine the next hop for the
+#                 message because the necessary routing information was unavailable
+#                 from the directory server. This is useful for both permanent
+#                 and persistent transient errors. A DNS lookup returning only
+#                 an SOA (Start of Administration) record for a domain name is
+#                 one example of the unable to route error.
+#
+# X.4.5  451    Mail system congestion:(RFC 3463)
+#                 The mail system was unable to deliver the message because the
+#                 mail system was congested. This is useful only as a persistent
+#                 transient error.
+#
+# X.4.6  ---    Routing loop detected:(RFC 3463)
+#                 A routing loop caused the message to be forwarded too many times,
+#                 either because of incorrect routing tables or a user-forwarding
+#                 loop. This is useful only as a persistent transient error.
+#
+# X.4.7  ---    Delivery time expired:(RFC 3463)
+#                 The message was considered too old by the rejecting system,
+#                 either because it remained on that host too long or because
+#                 the time-to-live value specified by the sender of the message
+#                 was exceeded. If possible, the code for the actual problem
+#                 found when delivery was attempted should be returned rather
+#                 than this code.
+# ------------------------------------------------------------------------------
+# X.5.0  220    Other or undefined protocol status:(RFC 3463)
+#        250-253  Something was wrong with the protocol necessary to deliver the
+#        451,452  message to the next hop and the problem cannot be well expressed
+#        454,458  with any of the other provided detail codes.
+#        459,554
+#        501-503
+#
+# X.5.1  430    Invalid command:(RFC 3463)
+#        500,501  A mail transaction protocol command was issued which was either
+#        503,530  out of sequence or unsupported.
+#        550,554  This is useful only as a permanent error.
+#        555
+#
+# X.5.2  500    Syntax error:(RFC 3463)
+#        500,501  A mail transaction protocol command was issued which could not
+#        502,550  be interpreted, either because the syntax was wrong or the
+#        555      command is unrecognized.
+#                 This is useful only as a permanent error.
+#
+# X.5.3  451    Too many recipients:(RFC 3463)
+#                 More recipients were specified for the message than could have
+#                 been delivered by the protocol. This error should normally result
+#                 in the segmentation of the message into two, the remainder of
+#                 the recipients to be delivered on a subsequent delivery attempt.
+#                 It is included in this list in the event that such segmentation
+#                 is not possible.
+#
+# X.5.4  451    Invalid command arguments:(RFC 3463)
+#        501-504  A valid mail transaction protocol command was issued with
+#        550      invalid arguments, either because the arguments were out of
+#        555      range or represented unrecognized features.
+#                 This is useful only as a permanent error.
+#
+# X.5.5  ---    Wrong protocol version:(RFC 3463)
+#                 A protocol version mis-match existed which could not be
+#                 automatically resolved by the communicating parties.
+#
+# X.5.6  550    Authentication Exchange line is too long (RFC 4954)
+#                 This enhanced status code SHOULD be returned when the server
+#                 fails the AUTH command due to the client sending a [BASE64]
+#                 response which is longer than the maximum buffer size available
+#                 for the currently selected SASL mechanism. This is useful for
+#                 both permanent and persistent transient errors.
+# ------------------------------------------------------------------------------
+# X.6.0  ---    Other or undefined media error:(RFC 3463)
+#                 Something about the content of a message caused it to be considered
+#                 undeliverable and the problem cannot be well expressed with
+#                 any of the other provided detail codes.
+#
+# X.6.1  ---    Media not supported:(RFC 3463)
+#                 The media of the message is not supported by either the delivery
+#                 protocol or the next system in the forwarding path. This is
+#                 useful only as a permanent error.
+#
+# X.6.2  ---    Conversion required and prohibited:(RFC 3463)
+#                 The content of the message must be converted before it can be
+#                 delivered and such conversion is not permitted. Such prohibitions
+#                 may be the expression of the sender in the message itself or
+#                 the policy of the sending host.
+#
+# X.6.3  554    Conversion required but not supported:(RFC 3463)
+#                 The message content must be converted in order to be forwarded
+#                 but such conversion is not possible or is not practical by a
+#                 host in the forwarding path. This condition may result when
+#                 an ESMTP gateway supports 8bit transport but is not able to
+#                 downgrade the message to 7 bit as required for the next hop.
+#
+# X.6.4  250    Conversion with loss performed:(RFC 3463)
+#                 This is a warning sent to the sender when message delivery was
+#                 successfully but when the delivery required a conversion in
+#                 which some data was lost. This may also be a permanent error
+#                 if the sender has indicated that conversion with loss is
+#                 prohibited for the message.
+#
+# X.6.5  ---    Conversion Failed:(RFC 3463)
+#                 A conversion was required but was unsuccessful. This may be
+#                 useful as a permanent or persistent temporary notification.
+#
+# X.6.6  554    Message content not available (RFC 4468)
+#                 The message content could not be fetched from a remote system.
+#                 This may be useful as a permanent or persistent temporary
+#                 notification.
+#
+# X.6.7  553    The ALT-ADDRESS is required but not specified:(RFC 6531)
+#        550      This indicates the reception of a MAIL or RCPT command that
+#                 non-ASCII addresses are not permitted
+#
+# X.6.8  252    UTF-8 string reply is required, but not permitted by the client:(RFC 6531)
+#        553      This indicates that a reply containing a UTF-8 string is required
+#        550      to show the mailbox name, but that form of response is not permitted
+#                 by the SMTP client.
+#
+# X.6.9  550    UTF8SMTP downgrade failed:(RFC 6531)
+#                 This indicates that transaction failed after the final "." of
+#                 the DATA command.
+#
+# X.6.10        This is a duplicate of X.6.8 and is thus deprecated.
+# ------------------------------------------------------------------------------
+# X.7.0  220    Other or undefined security status:(RFC 3463)
+#        235      Something related to security caused the message to be returned,
+#        450,454  and the problem cannot be well expressed with any of the other
+#        500,501  provided detail codes. This status code may also be used when
+#        503,504  the condition cannot be further described because of security
+#        530,535  policies in force.
+#        550
+#
+# X.7.1  451    Delivery not authorized, message refused:(RFC 3463)
+#        454,502  The sender is not authorized to send to the destination. This
+#        503,533  can be the result of per-host or per-recipient filtering. This
+#        550,551  memo does not discuss the merits of any such filtering, but
+#                 provides a mechanism to report such. This is useful only as
+#                 a permanent error.
+#
+# X.7.2  550    Mailing list expansion prohibited:(RFC 3463)
+#                 The sender is not authorized to send a message to the intended
+#                 mailing list. This is useful only as a permanent error.
+#
+# X.7.3  ---    Security conversion required but not possible:(RFC 3463)
+#                 A conversion from one secure messaging protocol to another was
+#                 required for delivery and such conversion was not possible.
+#                 This is useful only as a permanent error.
+#
+# X.7.4  504    Security features not supported:(RFC 3463)
+#                 A message contained security features such as secure authentication
+#                 that could not be supported on the delivery protocol. This is
+#                 useful only as a permanent error.
+#
+# X.7.5  ---    Cryptographic failure:(RFC 3463)
+#                 A transport system otherwise authorized to validate or decrypt
+#                 a message in transport was unable to do so because necessary
+#                 information such as key was not available or such information
+#                 was invalid.
+#
+# X.7.6  ---    Cryptographic algorithm not supported:(RFC 3463)
+#                 A transport system otherwise authorized to validate or decrypt
+#                 a message was unable to do so because the necessary algorithm
+#                 was not supported.
+
+# X.7.7  ---    Message integrity failure:(RFC 3463)
+#                 A transport system otherwise authorized to validate a message
+#                 was unable to do so because the message was corrupted or altered.
+#                 This may be useful as a permanent, transient persistent, or
+#                 successful delivery code.
+#
+# X.7.8  535    Trust relationship required:(RFC 4954)
+#        554      This response to the AUTH command indicates that the authentication
+#                 failed due to invalid or insufficient authentication credentials.
+#                 In this case, the client SHOULD ask the user to supply new credentials
+#                 (such as by presenting a password dialog box).
+#
+# X.7.9  534    Authentication mechanism is too weak:(RFC 4954)
+#                 This response to the AUTH command indicates that the selected
+#                 authentication mechanism is weaker than server policy permits
+#                 for that user. The client SHOULD retry with a new authentication
+#                 mechanism.
+#
+# X.7.10 523    Encryption Needed:(RFC 5248)
+#                 This indicates that external strong privacy layer is needed in
+#                 order to use the requested authentication mechanism. This is
+#                 primarily intended for use with clear text authentication mechanisms.
+#                 A client which receives this may activate a security layer such
+#                 as TLS prior to authenticating, or attempt to use a stronger
+#                 mechanism.
+#
+# X.7.11 524    Encryption required for requested authentication mechanism:(RFC 4954)
+#        538      This response to the AUTH command indicates that the selected
+#                 authentication mechanism may only be used when the underlying
+#                 SMTP connection is encrypted. Note that this response code is
+#                 documented here for historical purposes only. Modern implementations
+#                 SHOULD NOT advertise mechanisms that are not permitted due to
+#                 lack of encryption, unless an encryption layer of sufficient
+#                 strength is currently being employed.
+#
+# X.7.12 422    A password transition is needed:(RFC 4954)
+#        432      This response to the AUTH command indicates that the user needs
+#                 to transition to the selected authentication mechanism. This
+#                 is typically done by authenticating once using the [PLAIN]
+#                 authentication mechanism. The selected mechanism SHOULD then
+#                 work for authentications in subsequent sessions.
+#
+# X.7.13 525    User Account Disabled:(RFC 5248)
+#                 Sometimes a system administrator will have to disable a user's
+#                 account (e.g., due to lack of payment, abuse, evidence of a
+#                 break-in attempt, etc).
+#                 This error code occurs after a successful authentication to a
+#                 disabled account. This informs the client that the failure is
+#                 permanent until the user contacts their system administrator
+#                 to get the account re-enabled.
+#                 It differs from a generic authentication failure where the
+#                 client's best option is to present the passphrase entry dialog
+#                 in case the user simply mistyped their passphrase.
+#
+# X.7.14 535    Trust relationship required:(RFC 5248)
+#        554      The submission server requires a configured trust relationship
+#                 with a third-party server in order to access the message content.
+#                 This value replaces the prior use of X.7.8 for this error condition.
+#                 thereby updating [RFC4468].
+#
+# X.7.15 450    Priority Level is too low:(RFC6710)
+#        550      The specified priority level is below the lowest priority acceptable
+#        4xx      for the receiving SMTP server. This condition might be temporary,
+#        5xx      for example the server is operating in a mode where only higher
+#                 priority messages are accepted for transfer and delivery, while
+#                 lower priority messages are rejected.
+#
+# X.7.16 552    Message is too big for the specified priority:(RFC 6710)
+#        4xx      The message is too big for the specified priority.
+#        5xx      This condition might be temporary, for example the server is
+#                 operating in a mode where only higher priority messages below
+#                 certain size are accepted for transfer and delivery.
+#
+# X.7.17 5xx    Mailbox owner has changed:(RFC 6710)
+#                 This status code is returned when a message is received with
+#                 a Require-Recipient-Valid-Since field or RRVS extension and
+#                 the receiving system is able to determine that the intended
+#                 recipient mailbox has not been under continuous ownership since
+#                 the specified date-time.
+#
+# X.7.18 5xx    Domain owner has changed:(RFC 7293)
+#                 This status code is returned when a message is received with
+#                 a Require-Recipient-Valid-Since field or RRVS extension and
+#                 the receiving system wishes to disclose that the owner of the
+#                 domain name of the recipient has changed since the specified
+#                 date-time.
+#
+# X.7.19 5xx    RRVS test cannot be completed:(RFC 7293)
+#                 This status code is returned when a message is received with
+#                 a Require-Recipient-Valid-Since field or RRVS extension and
+#                 the receiving system cannot complete the requested evaluation
+#                 because the required timestamp was not recorded.
+#                 The message originator needs to decide whether to reissue the
+#                 message without RRVS protection.
+#
+# X.7.20 550    No passing DKIM signature found:(RFC 7372)
+#                 This status code is returned when a message did not contain
+#                 any passing DKIM signatures. (This violates the advice of
+#                 Section 6.1 of [RFC6376].)
+#
+# X.7.21 550    No acceptable DKIM signature found:(RFC 7372, 6476)
+#                 This status code is returned when a message contains one or
+#                 more passing DKIM signatures, but none are acceptable.
+#                 (This violates the advice of Section 6.1 of [RFC6376].)
+#
+# X.7.22 550    No valid author-matched DKIM signature found:(RFC 7372)
+#                 This status code is returned when a message contains one or
+#                 more passing DKIM signatures, but none are acceptable because
+#                 none have an identifier(s) that matches the author address(es)
+#                 found in the From header field.
+#                 This is a special case of X.7.21. (This violates the advice of
+#                 Section 6.1 of [RFC6376].)
+#
+# X.7.23 550    SPF validation failed:(RFC 7273, 7208)
+#                 This status code is returned when a message completed an SPF
+#                 check that produced a "fail" result, contrary to local policy
+#                 requirements. Used in place of 5.7.1 as described in Section
+#                 8.4 of [RFC7208].
+#
+# X.7.24 451    SPF validation error:(RFC 7372, 7208)
+#        550      This status code is returned when evaluation of SPF relative
+#                 to an arriving message resulted in an error. Used in place of
+#                 4.4.3 or 5.5.2 as described in Sections 8.6 and 8.7 of [RFC7208].
+#
+# X.7.25 550    Reverse DNS validation failed:(RFC 7372, 7601)
+#                 This status code is returned when an SMTP client's IP address
+#                 failed a reverse DNS validation check, contrary to local policy
+#                 requirements.
+#
+# X.7.26 550    Multiple authentication checks failed:(RFC 7372)
+#                 This status code is returned when a message failed more than
+#                 one message authentication check, contrary to local policy
+#                 requirements. The particular mechanisms that failed are not
+#                 specified.
+#
+# X.7.27 550    Sender address has null MX:(RFC 7505)
+#                 This status code is returned when the associated sender address
+#                 has a null MX, and the SMTP receiver is configured to reject
+#                 mail from such sender (e.g., because it could not return a DSN).
+# ------------------------------------------------------------------------------
+# SAMPLES
+#
+#   554 5.5.0   No recipients have been specified
+#   503 5.5.0   Valid RCPT TO required before BURL
+#   554 5.6.3   Conversion required but not supported
+#   554 5.3.4   Message too big for system
+#   554 5.7.8   URL resolution requires trust relationship
+#   552 5.2.2   Mailbox full
+#   554 5.6.6   IMAP URL resolution failed
+#   250 2.5.0   Waiting for additional BURL or BDAT commands
+#   451 4.4.1   IMAP server unavailable
+#   250 2.5.0   Ok.
+#   250 2.6.4   MIME header conversion with loss performed
+#   235 2.7.0   Authentication Succeeded
+#   432 4.7.12  A password transition is needed
+#   454 4.7.0   Temporary authentication failure
+#   534 5.7.9   Authentication mechanism is too weak
+#   535 5.7.8   Authentication credentials invalid
+#   500 5.5.6   Authentication Exchange line is too long
+#   530 5.7.0   Authentication required
+#   538 5.7.11  Encryption required for requested authentication
+#       5.7.8   Authentication credentials invalid
+#       5.7.9   Authentication mechanism is too weak
+#       5.7.11  Encryption required for requested authentication mechanism
+# ------------------------------------------------------------------------------
+module Sisimai
+  module SMTP
+    # Sisimai::RFC3463 is utilities for getting D.S.N. value from error reason text,
+    # getting the reason from D.S.N. value, and getting D.S.N. from the text including
+    # D.S.N.
+    module Status
+      # Imported from p5-Sisimail/lib/Sisimai/SMTP/Status.pm
+      class << self
+        StandardCode = {
+          '2.1.5'  => 'delivered',      # Successfully delivered
+          # ------------------------------------------------------------------------------
+          '4.1.6'  => 'hasmoved',       # Destination mailbox has moved, No forwarding address
+          '4.1.7'  => 'rejected',       # Bad sender's mailbox address syntax
+          '4.1.8'  => 'rejected',       # Bad sender's system address
+          '4.1.9'  => 'systemerror',    # Message relayed to non-compliant mailer
+          '4.2.1'  => 'suspend',        # Mailbox disabled, not accepting messages
+          '4.2.2'  => 'mailboxfull',    # Mailbox full
+          '4.2.3'  => 'exceedlimit',    # Message length exceeds administrative limit
+          '4.2.4'  => 'filtered',       # Mailing list expansion problem
+          #'4.3.0' => 'systemerror',    # Other or undefined mail system status
+          '4.3.1'  => 'systemfull',     # Mail system full
+          '4.3.2'  => 'notaccept',      # System not accepting network messages
+          '4.3.3'  => 'systemerror',    # System not capable of selected features
+          '4.3.5'  => 'systemerror',    # System incorrectly configured
+          #'4.4.0' => 'networkerror',   # Other or undefined network or routing status
+          '4.4.1'  => 'expired',        # No answer from host
+          '4.4.2'  => 'networkerror',   # Bad connection
+          #'4.4.3' => 'systemerror',    # Directory server failure
+          '4.4.4'  => 'networkerror',   # Unable to route
+          '4.4.5'  => 'toomanyconn',    # Mail system congestion
+          '4.4.6'  => 'networkerror',   # Routing loop detected
+          '4.4.7'  => 'expired',        # Delivery time expired
+          #'4.5.0' => 'networkerror',   # Other or undefined protocol status
+          '4.5.3'  => 'systemerror',    # Too many recipients
+          '4.5.5'  => 'systemerror',    # Wrong protocol version
+          '4.6.0'  => 'contenterror',   # Other or undefined media error
+          '4.6.2'  => 'contenterror',   # Conversion required and prohibited
+          '4.6.5'  => 'contenterror',   # Conversion Failed
+          #'4.7.0' => 'securityerror',  # Other or undefined security status
+          '4.7.1'  => 'blocked',        # Delivery not authorized, message refused
+          '4.7.2'  => 'blocked',        # Mailing list expansion prohibited
+          '4.7.5'  => 'securityerror',  # Cryptographic failure
+          '4.7.6'  => 'securityerror',  # Cryptographic algorithm not supported
+          '4.7.7'  => 'securityerror',  # Message integrity failure
+          '4.7.12' => 'securityerror',  # A password transition is needed
+          '4.7.15' => 'securityerror',  # Priority Level is too low
+          '4.7.16' => 'mesgtoobig',     # Message is too big for the specified priority
+          '4.7.24' => 'securityerror',  # SPF validation error
+          # ------------------------------------------------------------------------------
+          '5.1.0'  => 'userunknown',    # Other address status
+          '5.1.1'  => 'userunknown',    # Bad destination mailbox address
+          '5.1.2'  => 'hostunknown',    # Bad destination system address
+          '5.1.3'  => 'userunknown',    # Bad destination mailbox address syntax
+          '5.1.4'  => 'filtered',       # Destination mailbox address ambiguous
+          '5.1.6'  => 'hasmoved',       # Destination mailbox has moved, No forwarding address
+          '5.1.7'  => 'rejected',       # Bad sender's mailbox address syntax
+          '5.1.8'  => 'rejected',       # Bad sender's system address
+          '5.1.9'  => 'systemerror',    # Message relayed to non-compliant mailer
+          '5.1.10' => 'notaccept',      # Recipient address has null MX
+          '5.2.0'  => 'filtered',       # Other or undefined mailbox status
+          '5.2.1'  => 'filtered',       # Mailbox disabled, not accepting messages
+          '5.2.2'  => 'mailboxfull',    # Mailbox full
+          '5.2.3'  => 'exceedlimit',    # Message length exceeds administrative limit
+          '5.2.4'  => 'filtered',       # Mailing list expansion problem
+          '5.3.0'  => 'systemerror',    # Other or undefined mail system status
+          '5.3.1'  => 'systemfull',     # Mail system full
+          '5.3.2'  => 'notaccept',      # System not accepting network messages
+          '5.3.3'  => 'systemerror',    # System not capable of selected features
+          '5.3.4'  => 'mesgtoobig',     # Message too big for system
+          '5.3.5'  => 'systemerror',    # System incorrectly configured
+          '5.4.0'  => 'networkerror',   # Other or undefined network or routing status
+          '5.4.3'  => 'systemerror',    # Directory server failure
+          '5.5.3'  => 'toomanyconn',    # Too many recipients
+          '5.5.4'  => 'systemerror',    # Invalid command arguments
+          '5.5.5'  => 'systemerror',    # Wrong protocol version
+          '5.5.6'  => 'securityerror',  # Authentication Exchange line is too long
+          '5.6.0'  => 'contenterror',   # Other or undefined media error
+          '5.6.1'  => 'contenterror',   # Media not supported
+          '5.6.2'  => 'contenterror',   # Conversion required and prohibited
+          '5.6.3'  => 'contenterror',   # Conversion required but not supported
+          '5.6.5'  => 'contenterror',   # Conversion Failed
+          '5.6.6'  => 'contenterror',   # Message content not available
+          '5.6.7'  => 'contenterror',   # Non-ASCII addresses not permitted for that sender/recipient
+          '5.6.8'  => 'contenterror',   # UTF-8 string reply is required, but not permitted by the SMTP client
+          '5.6.9'  => 'contenterror',   # UTF-8 header message cannot be transferred to one or more recipients
+          '5.7.0'  => 'securityerror',  # Other or undefined security status
+          '5.7.1'  => 'blocked',        # Delivery not authorized, message refused
+          '5.7.2'  => 'blocked',        # Mailing list expansion prohibited
+          '5.7.3'  => 'securityerror',  # Security conversion required but not possible
+          '5.7.4'  => 'securityerror',  # Security features not supported
+          '5.7.5'  => 'securityerror',  # Cryptographic failure
+          '5.7.6'  => 'securityerror',  # Cryptographic algorithm not supported
+          '5.7.7'  => 'securityerror',  # Message integrity failure
+          '5.7.8'  => 'securityerror',  # Authentication credentials invalid
+          '5.7.9'  => 'securityerror',  # Authentication mechanism is too weak
+          '5.7.10' => 'securityerror',  # Encryption Needed
+          '5.7.11' => 'securityerror',  # Encryption required for requested authentication mechanism
+          '5.7.13' => 'suspend',        # User Account Disabled
+          '5.7.14' => 'securityerror',  # Trust relationship required
+          '5.7.15' => 'securityerror',  # Priority Level is too low
+          '5.7.16' => 'mesgtoobig',     # Message is too big for the specified priority
+          '5.7.17' => 'hasmoved',       # Mailbox owner has changed
+          '5.7.18' => 'hasmoved',       # Domain owner has changed
+          '5.7.19' => 'securityerror',  # RRVS test cannot be completed
+          '5.7.20' => 'securityerror',  # No passing DKIM signature found
+          '5.7.21' => 'securityerror',  # No acceptable DKIM signature found
+          '5.7.22' => 'securityerror',  # No valid author-matched DKIM signature found
+          '5.7.23' => 'securityerror',  # SPF validation failed
+          '5.7.24' => 'securityerror',  # SPF validation error
+          '5.7.25' => 'blocked',        # Reverse DNS validation failed
+          '5.7.26' => 'securityerror',  # Multiple authentication checks failed
+          '5.7.27' => 'rejected',       # Sender address has null MX
+        }
+
+        InternalCode = {
+          'temporary' => {
+            'blocked'       => '4.0.971',
+            'contenterror'  => '4.0.960',
+            # 'exceedlimit' => '4.0.923',
+            'expired'       => '4.0.947',
+            'filtered'      => '4.0.924',
+            # 'hasmoved'    => '4.0.916',
+            # 'hostunknown' => '4.0.912',
+            'mailboxfull'   => '4.0.922',
+            # 'mailererror' => '4.0.939',
+            # 'mesgtoobig'  => '4.0.934',
+            'networkerror'  => '4.0.944',
+            # 'norelaying'  => '4.0.909',
+            'notaccept'     => '4.0.932',
+            'onhold'        => '4.0.901',
+            'rejected'      => '4.0.918',
+            'securityerror' => '4.0.970',
+            'spamdetected'  => '4.0.980',
+            # 'suspend'     => '4.0.921',
+            'systemerror'   => '4.0.930',
+            'systemfull'    => '4.0.931',
+            'toomanyconn'   => '4.0.945',
+            # 'userunknown' => '4.0.911',
+            'undefined'     => '4.0.900',
+          },
+          'permanent' => {
+            'blocked'       => '5.0.971',
+            'contenterror'  => '5.0.960',
+            'exceedlimit'   => '5.0.923',
+            'expired'       => '5.0.947',
+            'filtered'      => '5.0.910',
+            'hasmoved'      => '5.0.916',
+            'hostunknown'   => '5.0.912',
+            'mailboxfull'   => '5.0.922',
+            'mailererror'   => '5.0.939',
+            'mesgtoobig'    => '5.0.934',
+            'networkerror'  => '5.0.944',
+            'norelaying'    => '5.0.909',
+            'notaccept'     => '5.0.932',
+            'onhold'        => '5.0.901',
+            'rejected'      => '5.0.918',
+            'securityerror' => '5.0.970',
+            'spamdetected'  => '5.0.980',
+            'suspend'       => '5.0.921',
+            'systemerror'   => '5.0.930',
+            'systemfull'    => '5.0.931',
+            'toomanyconn'   => '5.0.945',
+            'userunknown'   => '5.0.911',
+            'undefined'     => '5.0.900',
+          },
+        }
+
+        # Convert from the reason string to the internal status code
+        # @param    [String]     argv1  Reason name
+        # @param    [True,False] argv2  false: Permanent error
+        #                               true:  Temporary error
+        # @return   [String] DSN or empty if the 1st argument is missing
+        # @see      name
+        def code(argv1 = '', argv2 = false)
+          return '' unless argv1
+          return '' unless argv1.size > 0
+
+          table = argv2 ? InternalCode['temporary'] : InternalCode['permanent']
+          code0 = table[argv1] || InternalCode['permanent'][argv1] || ''
+          return code0
+        end
+
+        # Convert from the status code to the reason string
+        # @param    [String] argv1  Status code(DSN)
+        # @return   [String]        Reason name or empty if the first argument did
+        #                           not match with values in Sisimai's reason list
+        # @see      code
+        def name(argv1 = '')
+          return '' unless argv1
+          return '' unless argv1.size > 0
+          return '' unless argv1 =~ /\A[245][.]\d[.]\d+\z/
+          return StandardCode[argv1] || ''
+        end
+
+        # Get a DSN code value from given string including DSN
+        # @param    [String] argv1  String including DSN
+        # @return   [String]        DSN or empty string if the first agument did
+        #                           not include DSN
+        def find(argv1 = '')
+          return '' unless argv1
+          return '' unless argv1.size > 0
+
+          foundvalue = ''
+          regularexp = [
+            %r/[ ]?[(][#]([45][.]\d[.]\d+)[)]?[ ]?/,  # #5.5.1
+            %r/\b\d{3}[- ][#]?([45][.]\d[.]\d+)\b/,   # 550-5.1.1 OR 550 5.5.1
+            %r/\b([45][.]\d[.]\d+)\b/,                # 5.5.1
+            %r/\b(2[.][0-7][.][0-7])\b/,              # 2.1.5
+          ]
+
+          regularexp.each do |e|
+            # Get the value of D.S.N. in the text
+            next unless r = argv1.match(e)
+            foundvalue = r[1]
+            break
+          end
+
+          return foundvalue
+        end
+      end
+    end
+  end
+end
+