simpletool 0.0.3 → 0.0.4

data/lib/support/phpmyadmin/phpmyadmin/libraries/phpseclib/Crypt/Base.php

@@ -1,1984 +0,0 @@
-<?php
-
-/**
- * Base Class for all Crypt_* cipher classes
- *
- * PHP versions 4 and 5
- *
- * Internally for phpseclib developers:
- *  If you plan to add a new cipher class, please note following rules:
- *
- *  - The new Crypt_* cipher class should extend Crypt_Base
- *
- *  - Following methods are then required to be overridden/overloaded:
- *
- *    - _encryptBlock()
- *
- *    - _decryptBlock()
- *
- *    - _setupKey()
- *
- *  - All other methods are optional to be overridden/overloaded
- *
- *  - Look at the source code of the current ciphers how they extend Crypt_Base
- *    and take one of them as a start up for the new cipher class.
- *
- *  - Please read all the other comments/notes/hints here also for each class var/method
- *
- * LICENSE: Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * @category  Crypt
- * @package   Crypt_Base
- * @author    Jim Wigginton <terrafrost@php.net>
- * @author    Hans-Juergen Petrich <petrich@tronic-media.com>
- * @copyright MMVII Jim Wigginton
- * @license   http://www.opensource.org/licenses/mit-license.html  MIT License
- * @link      http://phpseclib.sourceforge.net
- */
-
-/**#@+
- * @access public
- * @see Crypt_Base::encrypt()
- * @see Crypt_Base::decrypt()
- */
-/**
- * Encrypt / decrypt using the Counter mode.
- *
- * Set to -1 since that's what Crypt/Random.php uses to index the CTR mode.
- *
- * @link http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation#Counter_.28CTR.29
- */
-define('CRYPT_MODE_CTR', -1);
-/**
- * Encrypt / decrypt using the Electronic Code Book mode.
- *
- * @link http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation#Electronic_codebook_.28ECB.29
- */
-define('CRYPT_MODE_ECB', 1);
-/**
- * Encrypt / decrypt using the Code Book Chaining mode.
- *
- * @link http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation#Cipher-block_chaining_.28CBC.29
- */
-define('CRYPT_MODE_CBC', 2);
-/**
- * Encrypt / decrypt using the Cipher Feedback mode.
- *
- * @link http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation#Cipher_feedback_.28CFB.29
- */
-define('CRYPT_MODE_CFB', 3);
-/**
- * Encrypt / decrypt using the Output Feedback mode.
- *
- * @link http://en.wikipedia.org/wiki/Block_cipher_modes_of_operation#Output_feedback_.28OFB.29
- */
-define('CRYPT_MODE_OFB', 4);
-/**
- * Encrypt / decrypt using streaming mode.
- *
- */
-define('CRYPT_MODE_STREAM', 5);
-/**#@-*/
-
-/**#@+
- * @access private
- * @see Crypt_Base::Crypt_Base()
- */
-/**
- * Base value for the internal implementation $engine switch
- */
-define('CRYPT_MODE_INTERNAL', 1);
-/**
- * Base value for the mcrypt implementation $engine switch
- */
-define('CRYPT_MODE_MCRYPT', 2);
-/**#@-*/
-
-/**
- * Base Class for all Crypt_* cipher classes
- *
- * @package Crypt_Base
- * @author  Jim Wigginton <terrafrost@php.net>
- * @author  Hans-Juergen Petrich <petrich@tronic-media.com>
- * @access  public
- */
-class Crypt_Base
-{
-    /**
-     * The Encryption Mode
-     *
-     * @see Crypt_Base::Crypt_Base()
-     * @var Integer
-     * @access private
-     */
-    var $mode;
-
-    /**
-     * The Block Length of the block cipher
-     *
-     * @var Integer
-     * @access private
-     */
-    var $block_size = 16;
-
-    /**
-     * The Key
-     *
-     * @see Crypt_Base::setKey()
-     * @var String
-     * @access private
-     */
-    var $key = "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0";
-
-    /**
-     * The Initialization Vector
-     *
-     * @see Crypt_Base::setIV()
-     * @var String
-     * @access private
-     */
-    var $iv;
-
-    /**
-     * A "sliding" Initialization Vector
-     *
-     * @see Crypt_Base::enableContinuousBuffer()
-     * @see Crypt_Base::_clearBuffers()
-     * @var String
-     * @access private
-     */
-    var $encryptIV;
-
-    /**
-     * A "sliding" Initialization Vector
-     *
-     * @see Crypt_Base::enableContinuousBuffer()
-     * @see Crypt_Base::_clearBuffers()
-     * @var String
-     * @access private
-     */
-    var $decryptIV;
-
-    /**
-     * Continuous Buffer status
-     *
-     * @see Crypt_Base::enableContinuousBuffer()
-     * @var Boolean
-     * @access private
-     */
-    var $continuousBuffer = false;
-
-    /**
-     * Encryption buffer for CTR, OFB and CFB modes
-     *
-     * @see Crypt_Base::encrypt()
-     * @see Crypt_Base::_clearBuffers()
-     * @var Array
-     * @access private
-     */
-    var $enbuffer;
-
-    /**
-     * Decryption buffer for CTR, OFB and CFB modes
-     *
-     * @see Crypt_Base::decrypt()
-     * @see Crypt_Base::_clearBuffers()
-     * @var Array
-     * @access private
-     */
-    var $debuffer;
-
-    /**
-     * mcrypt resource for encryption
-     *
-     * The mcrypt resource can be recreated every time something needs to be created or it can be created just once.
-     * Since mcrypt operates in continuous mode, by default, it'll need to be recreated when in non-continuous mode.
-     *
-     * @see Crypt_Base::encrypt()
-     * @var Resource
-     * @access private
-     */
-    var $enmcrypt;
-
-    /**
-     * mcrypt resource for decryption
-     *
-     * The mcrypt resource can be recreated every time something needs to be created or it can be created just once.
-     * Since mcrypt operates in continuous mode, by default, it'll need to be recreated when in non-continuous mode.
-     *
-     * @see Crypt_Base::decrypt()
-     * @var Resource
-     * @access private
-     */
-    var $demcrypt;
-
-    /**
-     * Does the enmcrypt resource need to be (re)initialized?
-     *
-     * @see Crypt_Twofish::setKey()
-     * @see Crypt_Twofish::setIV()
-     * @var Boolean
-     * @access private
-     */
-    var $enchanged = true;
-
-    /**
-     * Does the demcrypt resource need to be (re)initialized?
-     *
-     * @see Crypt_Twofish::setKey()
-     * @see Crypt_Twofish::setIV()
-     * @var Boolean
-     * @access private
-     */
-    var $dechanged = true;
-
-    /**
-     * mcrypt resource for CFB mode
-     *
-     * mcrypt's CFB mode, in (and only in) buffered context,
-     * is broken, so phpseclib implements the CFB mode by it self,
-     * even when the mcrypt php extension is available.
-     *
-     * In order to do the CFB-mode work (fast) phpseclib
-     * use a separate ECB-mode mcrypt resource.
-     *
-     * @link http://phpseclib.sourceforge.net/cfb-demo.phps
-     * @see Crypt_Base::encrypt()
-     * @see Crypt_Base::decrypt()
-     * @see Crypt_Base::_setupMcrypt()
-     * @var Resource
-     * @access private
-     */
-    var $ecb;
-
-    /**
-     * Optimizing value while CFB-encrypting
-     *
-     * Only relevant if $continuousBuffer enabled
-     * and $engine == CRYPT_MODE_MCRYPT
-     *
-     * It's faster to re-init $enmcrypt if
-     * $buffer bytes > $cfb_init_len than
-     * using the $ecb resource furthermore.
-     *
-     * This value depends of the chosen cipher
-     * and the time it would be needed for it's
-     * initialization [by mcrypt_generic_init()]
-     * which, typically, depends on the complexity
-     * on its internaly Key-expanding algorithm.
-     *
-     * @see Crypt_Base::encrypt()
-     * @var Integer
-     * @access private
-     */
-    var $cfb_init_len = 600;
-
-    /**
-     * Does internal cipher state need to be (re)initialized?
-     *
-     * @see setKey()
-     * @see setIV()
-     * @see disableContinuousBuffer()
-     * @var Boolean
-     * @access private
-     */
-    var $changed = true;
-
-    /**
-     * Padding status
-     *
-     * @see Crypt_Base::enablePadding()
-     * @var Boolean
-     * @access private
-     */
-    var $padding = true;
-
-    /**
-     * Is the mode one that is paddable?
-     *
-     * @see Crypt_Base::Crypt_Base()
-     * @var Boolean
-     * @access private
-     */
-    var $paddable = false;
-
-    /**
-     * Holds which crypt engine internaly should be use,
-     * which will be determined automatically on __construct()
-     *
-     * Currently available $engines are:
-     * - CRYPT_MODE_MCRYPT   (fast, php-extension: mcrypt, extension_loaded('mcrypt') required)
-     * - CRYPT_MODE_INTERNAL (slower, pure php-engine, no php-extension required)
-     *
-     * In the pipeline... maybe. But currently not available:
-     * - CRYPT_MODE_OPENSSL  (very fast, php-extension: openssl, extension_loaded('openssl') required)
-     *
-     * If possible, CRYPT_MODE_MCRYPT will be used for each cipher.
-     * Otherwise CRYPT_MODE_INTERNAL
-     *
-     * @see Crypt_Base::encrypt()
-     * @see Crypt_Base::decrypt()
-     * @var Integer
-     * @access private
-     */
-    var $engine;
-
-    /**
-     * The mcrypt specific name of the cipher
-     *
-     * Only used if $engine == CRYPT_MODE_MCRYPT
-     *
-     * @link http://www.php.net/mcrypt_module_open
-     * @link http://www.php.net/mcrypt_list_algorithms
-     * @see Crypt_Base::_setupMcrypt()
-     * @var String
-     * @access private
-     */
-    var $cipher_name_mcrypt;
-
-    /**
-     * The default password key_size used by setPassword()
-     *
-     * @see Crypt_Base::setPassword()
-     * @var Integer
-     * @access private
-     */
-    var $password_key_size = 32;
-
-    /**
-     * The default salt used by setPassword()
-     *
-     * @see Crypt_Base::setPassword()
-     * @var String
-     * @access private
-     */
-    var $password_default_salt = 'phpseclib/salt';
-
-    /**
-     * The namespace used by the cipher for its constants.
-     *
-     * ie: AES.php is using CRYPT_AES_MODE_* for its constants
-     *     so $const_namespace is AES
-     *
-     *     DES.php is using CRYPT_DES_MODE_* for its constants
-     *     so $const_namespace is DES... and so on
-     *
-     * All CRYPT_<$const_namespace>_MODE_* are aliases of
-     * the generic CRYPT_MODE_* constants, so both could be used
-     * for each cipher.
-     *
-     * Example:
-     * $aes = new Crypt_AES(CRYPT_AES_MODE_CFB); // $aes will operate in cfb mode
-     * $aes = new Crypt_AES(CRYPT_MODE_CFB);     // identical
-     *
-     * @see Crypt_Base::Crypt_Base()
-     * @var String
-     * @access private
-     */
-    var $const_namespace;
-
-    /**
-     * The name of the performance-optimized callback function
-     *
-     * Used by encrypt() / decrypt()
-     * only if $engine == CRYPT_MODE_INTERNAL
-     *
-     * @see Crypt_Base::encrypt()
-     * @see Crypt_Base::decrypt()
-     * @see Crypt_Base::_setupInlineCrypt()
-     * @see Crypt_Base::$use_inline_crypt
-     * @var Callback
-     * @access private
-     */
-    var $inline_crypt;
-
-    /**
-     * Holds whether performance-optimized $inline_crypt() can/should be used.
-     *
-     * @see Crypt_Base::encrypt()
-     * @see Crypt_Base::decrypt()
-     * @see Crypt_Base::inline_crypt
-     * @var mixed
-     * @access private
-     */
-    var $use_inline_crypt;
-
-    /**
-     * Default Constructor.
-     *
-     * Determines whether or not the mcrypt extension should be used.
-     *
-     * $mode could be:
-     *
-     * - CRYPT_MODE_ECB
-     *
-     * - CRYPT_MODE_CBC
-     *
-     * - CRYPT_MODE_CTR
-     *
-     * - CRYPT_MODE_CFB
-     *
-     * - CRYPT_MODE_OFB
-     *
-     * (or the alias constants of the chosen cipher, for example for AES: CRYPT_AES_MODE_ECB or CRYPT_AES_MODE_CBC ...)
-     *
-     * If not explicitly set, CRYPT_MODE_CBC will be used.
-     *
-     * @param optional Integer $mode
-     * @access public
-     */
-    function Crypt_Base($mode = CRYPT_MODE_CBC)
-    {
-        $const_crypt_mode = 'CRYPT_' . $this->const_namespace . '_MODE';
-
-        // Determining the availibility of mcrypt support for the cipher
-        if (!defined($const_crypt_mode)) {
-            switch (true) {
-                case extension_loaded('mcrypt') && in_array($this->cipher_name_mcrypt, mcrypt_list_algorithms()):
-                    define($const_crypt_mode, CRYPT_MODE_MCRYPT);
-                    break;
-                default:
-                    define($const_crypt_mode, CRYPT_MODE_INTERNAL);
-            }
-        }
-
-        // Determining which internal $engine should be used.
-        // The fastes possible first.
-        switch (true) {
-            case empty($this->cipher_name_mcrypt): // The cipher module has no mcrypt-engine support at all so we force CRYPT_MODE_INTERNAL
-                $this->engine = CRYPT_MODE_INTERNAL;
-                break;
-            case constant($const_crypt_mode) == CRYPT_MODE_MCRYPT:
-                $this->engine = CRYPT_MODE_MCRYPT;
-                break;
-            default:
-                $this->engine = CRYPT_MODE_INTERNAL;
-        }
-
-        // $mode dependent settings
-        switch ($mode) {
-            case CRYPT_MODE_ECB:
-                $this->paddable = true;
-                $this->mode = $mode;
-                break;
-            case CRYPT_MODE_CTR:
-            case CRYPT_MODE_CFB:
-            case CRYPT_MODE_OFB:
-            case CRYPT_MODE_STREAM:
-                $this->mode = $mode;
-                break;
-            case CRYPT_MODE_CBC:
-            default:
-                $this->paddable = true;
-                $this->mode = CRYPT_MODE_CBC;
-        }
-
-        // Determining whether inline crypting can be used by the cipher
-        if ($this->use_inline_crypt !== false && function_exists('create_function')) {
-            $this->use_inline_crypt = true;
-        }
-    }
-
-    /**
-     * Sets the initialization vector. (optional)
-     *
-     * SetIV is not required when CRYPT_MODE_ECB (or ie for AES: CRYPT_AES_MODE_ECB) is being used.  If not explicitly set, it'll be assumed
-     * to be all zero's.
-     *
-     * Note: Could, but not must, extend by the child Crypt_* class
-     *
-     * @access public
-     * @param String $iv
-     */
-    function setIV($iv)
-    {
-        if ($this->mode == CRYPT_MODE_ECB) {
-            return;
-        }
-
-        $this->iv = $iv;
-        $this->changed = true;
-    }
-
-    /**
-     * Sets the key.
-     *
-     * The min/max length(s) of the key depends on the cipher which is used.
-     * If the key not fits the length(s) of the cipher it will paded with null bytes
-     * up to the closest valid key length.  If the key is more than max length,
-     * we trim the excess bits.
-     *
-     * If the key is not explicitly set, it'll be assumed to be all null bytes.
-     *
-     * Note: Could, but not must, extend by the child Crypt_* class
-     *
-     * @access public
-     * @param String $key
-     */
-    function setKey($key)
-    {
-        $this->key = $key;
-        $this->changed = true;
-    }
-
-    /**
-     * Sets the password.
-     *
-     * Depending on what $method is set to, setPassword()'s (optional) parameters are as follows:
-     *     {@link http://en.wikipedia.org/wiki/PBKDF2 pbkdf2}:
-     *         $hash, $salt, $count, $dkLen
-     *
-     *         Where $hash (default = sha1) currently supports the following hashes: see: Crypt/Hash.php
-     *
-     * Note: Could, but not must, extend by the child Crypt_* class
-     *
-     * @see Crypt/Hash.php
-     * @param String $password
-     * @param optional String $method
-     * @access public
-     */
-    function setPassword($password, $method = 'pbkdf2')
-    {
-        $key = '';
-
-        switch ($method) {
-            default: // 'pbkdf2'
-                $func_args = func_get_args();
-
-                // Hash function
-                $hash = isset($func_args[2]) ? $func_args[2] : 'sha1';
-
-                // WPA and WPA2 use the SSID as the salt
-                $salt = isset($func_args[3]) ? $func_args[3] : $this->password_default_salt;
-
-                // RFC2898#section-4.2 uses 1,000 iterations by default
-                // WPA and WPA2 use 4,096.
-                $count = isset($func_args[4]) ? $func_args[4] : 1000;
-
-                // Keylength
-                $dkLen = isset($func_args[5]) ? $func_args[5] : $this->password_key_size;
-
-                // Determining if php[>=5.5.0]'s hash_pbkdf2() function avail- and useable
-                switch (true) {
-                    case !function_exists('hash_pbkdf2'):
-                    case !function_exists('hash_algos'):
-                    case !in_array($hash, hash_algos()):
-                        if (!class_exists('Crypt_Hash')) {
-                            include_once 'Crypt/Hash.php';
-                        }
-                        $i = 1;
-                        while (strlen($key) < $dkLen) {
-                            $hmac = new Crypt_Hash();
-                            $hmac->setHash($hash);
-                            $hmac->setKey($password);
-                            $f = $u = $hmac->hash($salt . pack('N', $i++));
-                            for ($j = 2; $j <= $count; ++$j) {
-                                $u = $hmac->hash($u);
-                                $f^= $u;
-                            }
-                            $key.= $f;
-                        }
-                        $key = substr($key, 0, $dkLen);
-                        break;
-                    default:
-                        $key = hash_pbkdf2($hash, $password, $salt, $count, $dkLen, true);
-                }
-        }
-
-        $this->setKey($key);
-    }
-
-    /**
-     * Encrypts a message.
-     *
-     * $plaintext will be padded with additional bytes such that it's length is a multiple of the block size. Other cipher
-     * implementations may or may not pad in the same manner.  Other common approaches to padding and the reasons why it's
-     * necessary are discussed in the following
-     * URL:
-     *
-     * {@link http://www.di-mgt.com.au/cryptopad.html http://www.di-mgt.com.au/cryptopad.html}
-     *
-     * An alternative to padding is to, separately, send the length of the file.  This is what SSH, in fact, does.
-     * strlen($plaintext) will still need to be a multiple of the block size, however, arbitrary values can be added to make it that
-     * length.
-     *
-     * Note: Could, but not must, extend by the child Crypt_* class
-     *
-     * @see Crypt_Base::decrypt()
-     * @access public
-     * @param String $plaintext
-     * @return String $cipertext
-     */
-    function encrypt($plaintext)
-    {
-        if ($this->engine == CRYPT_MODE_MCRYPT) {
-            if ($this->changed) {
-                $this->_setupMcrypt();
-                $this->changed = false;
-            }
-            if ($this->enchanged) {
-                mcrypt_generic_init($this->enmcrypt, $this->key, $this->encryptIV);
-                $this->enchanged = false;
-            }
-
-            // re: {@link http://phpseclib.sourceforge.net/cfb-demo.phps}
-            // using mcrypt's default handing of CFB the above would output two different things.  using phpseclib's
-            // rewritten CFB implementation the above outputs the same thing twice.
-            if ($this->mode == CRYPT_MODE_CFB && $this->continuousBuffer) {
-                $block_size = $this->block_size;
-                $iv = &$this->encryptIV;
-                $pos = &$this->enbuffer['pos'];
-                $len = strlen($plaintext);
-                $ciphertext = '';
-                $i = 0;
-                if ($pos) {
-                    $orig_pos = $pos;
-                    $max = $block_size - $pos;
-                    if ($len >= $max) {
-                        $i = $max;
-                        $len-= $max;
-                        $pos = 0;
-                    } else {
-                        $i = $len;
-                        $pos+= $len;
-                        $len = 0;
-                    }
-                    $ciphertext = substr($iv, $orig_pos) ^ $plaintext;
-                    $iv = substr_replace($iv, $ciphertext, $orig_pos, $i);
-                    $this->enbuffer['enmcrypt_init'] = true;
-                }
-                if ($len >= $block_size) {
-                    if ($this->enbuffer['enmcrypt_init'] === false || $len > $this->cfb_init_len) {
-                        if ($this->enbuffer['enmcrypt_init'] === true) {
-                            mcrypt_generic_init($this->enmcrypt, $this->key, $iv);
-                            $this->enbuffer['enmcrypt_init'] = false;
-                        }
-                        $ciphertext.= mcrypt_generic($this->enmcrypt, substr($plaintext, $i, $len - $len % $block_size));
-                        $iv = substr($ciphertext, -$block_size);
-                        $len%= $block_size;
-                    } else {
-                        while ($len >= $block_size) {
-                            $iv = mcrypt_generic($this->ecb, $iv) ^ substr($plaintext, $i, $block_size);
-                            $ciphertext.= $iv;
-                            $len-= $block_size;
-                            $i+= $block_size;
-                        }
-                    }
-                }
-
-                if ($len) {
-                    $iv = mcrypt_generic($this->ecb, $iv);
-                    $block = $iv ^ substr($plaintext, -$len);
-                    $iv = substr_replace($iv, $block, 0, $len);
-                    $ciphertext.= $block;
-                    $pos = $len;
-                }
-
-                return $ciphertext;
-            }
-
-            if ($this->paddable) {
-                $plaintext = $this->_pad($plaintext);
-            }
-
-            $ciphertext = mcrypt_generic($this->enmcrypt, $plaintext);
-
-            if (!$this->continuousBuffer) {
-                mcrypt_generic_init($this->enmcrypt, $this->key, $this->encryptIV);
-            }
-
-            return $ciphertext;
-        }
-
-        if ($this->changed) {
-            $this->_setup();
-            $this->changed = false;
-        }
-        if ($this->use_inline_crypt) {
-            $inline = $this->inline_crypt;
-            return $inline('encrypt', $this, $plaintext);
-        }
-        if ($this->paddable) {
-            $plaintext = $this->_pad($plaintext);
-        }
-
-        $buffer = &$this->enbuffer;
-        $block_size = $this->block_size;
-        $ciphertext = '';
-        switch ($this->mode) {
-            case CRYPT_MODE_ECB:
-                for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
-                    $ciphertext.= $this->_encryptBlock(substr($plaintext, $i, $block_size));
-                }
-                break;
-            case CRYPT_MODE_CBC:
-                $xor = $this->encryptIV;
-                for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
-                    $block = substr($plaintext, $i, $block_size);
-                    $block = $this->_encryptBlock($block ^ $xor);
-                    $xor = $block;
-                    $ciphertext.= $block;
-                }
-                if ($this->continuousBuffer) {
-                    $this->encryptIV = $xor;
-                }
-                break;
-            case CRYPT_MODE_CTR:
-                $xor = $this->encryptIV;
-                if (strlen($buffer['encrypted'])) {
-                    for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
-                        $block = substr($plaintext, $i, $block_size);
-                        if (strlen($block) > strlen($buffer['encrypted'])) {
-                            $buffer['encrypted'].= $this->_encryptBlock($this->_generateXor($xor, $block_size));
-                        }
-                        $key = $this->_stringShift($buffer['encrypted'], $block_size);
-                        $ciphertext.= $block ^ $key;
-                    }
-                } else {
-                    for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
-                        $block = substr($plaintext, $i, $block_size);
-                        $key = $this->_encryptBlock($this->_generateXor($xor, $block_size));
-                        $ciphertext.= $block ^ $key;
-                    }
-                }
-                if ($this->continuousBuffer) {
-                    $this->encryptIV = $xor;
-                    if ($start = strlen($plaintext) % $block_size) {
-                        $buffer['encrypted'] = substr($key, $start) . $buffer['encrypted'];
-                    }
-                }
-                break;
-            case CRYPT_MODE_CFB:
-                // cfb loosely routines inspired by openssl's:
-                // {@link http://cvs.openssl.org/fileview?f=openssl/crypto/modes/cfb128.c&v=1.3.2.2.2.1}
-                if ($this->continuousBuffer) {
-                    $iv = &$this->encryptIV;
-                    $pos = &$buffer['pos'];
-                } else {
-                    $iv = $this->encryptIV;
-                    $pos = 0;
-                }
-                $len = strlen($plaintext);
-                $i = 0;
-                if ($pos) {
-                    $orig_pos = $pos;
-                    $max = $block_size - $pos;
-                    if ($len >= $max) {
-                        $i = $max;
-                        $len-= $max;
-                        $pos = 0;
-                    } else {
-                        $i = $len;
-                        $pos+= $len;
-                        $len = 0;
-                    }
-                    // ie. $i = min($max, $len), $len-= $i, $pos+= $i, $pos%= $blocksize
-                    $ciphertext = substr($iv, $orig_pos) ^ $plaintext;
-                    $iv = substr_replace($iv, $ciphertext, $orig_pos, $i);
-                }
-                while ($len >= $block_size) {
-                    $iv = $this->_encryptBlock($iv) ^ substr($plaintext, $i, $block_size);
-                    $ciphertext.= $iv;
-                    $len-= $block_size;
-                    $i+= $block_size;
-                }
-                if ($len) {
-                    $iv = $this->_encryptBlock($iv);
-                    $block = $iv ^ substr($plaintext, $i);
-                    $iv = substr_replace($iv, $block, 0, $len);
-                    $ciphertext.= $block;
-                    $pos = $len;
-                }
-                break;
-            case CRYPT_MODE_OFB:
-                $xor = $this->encryptIV;
-                if (strlen($buffer['xor'])) {
-                    for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
-                        $block = substr($plaintext, $i, $block_size);
-                        if (strlen($block) > strlen($buffer['xor'])) {
-                            $xor = $this->_encryptBlock($xor);
-                            $buffer['xor'].= $xor;
-                        }
-                        $key = $this->_stringShift($buffer['xor'], $block_size);
-                        $ciphertext.= $block ^ $key;
-                    }
-                } else {
-                    for ($i = 0; $i < strlen($plaintext); $i+=$block_size) {
-                        $xor = $this->_encryptBlock($xor);
-                        $ciphertext.= substr($plaintext, $i, $block_size) ^ $xor;
-                    }
-                    $key = $xor;
-                }
-                if ($this->continuousBuffer) {
-                    $this->encryptIV = $xor;
-                    if ($start = strlen($plaintext) % $block_size) {
-                         $buffer['xor'] = substr($key, $start) . $buffer['xor'];
-                    }
-                }
-                break;
-            case CRYPT_MODE_STREAM:
-                $ciphertext = $this->_encryptBlock($plaintext);
-                break;
-        }
-
-        return $ciphertext;
-    }
-
-    /**
-     * Decrypts a message.
-     *
-     * If strlen($ciphertext) is not a multiple of the block size, null bytes will be added to the end of the string until
-     * it is.
-     *
-     * Note: Could, but not must, extend by the child Crypt_* class
-     *
-     * @see Crypt_Base::encrypt()
-     * @access public
-     * @param String $ciphertext
-     * @return String $plaintext
-     */
-    function decrypt($ciphertext)
-    {
-        if ($this->engine == CRYPT_MODE_MCRYPT) {
-            $block_size = $this->block_size;
-            if ($this->changed) {
-                $this->_setupMcrypt();
-                $this->changed = false;
-            }
-            if ($this->dechanged) {
-                mcrypt_generic_init($this->demcrypt, $this->key, $this->decryptIV);
-                $this->dechanged = false;
-            }
-
-            if ($this->mode == CRYPT_MODE_CFB && $this->continuousBuffer) {
-                $iv = &$this->decryptIV;
-                $pos = &$this->debuffer['pos'];
-                $len = strlen($ciphertext);
-                $plaintext = '';
-                $i = 0;
-                if ($pos) {
-                    $orig_pos = $pos;
-                    $max = $block_size - $pos;
-                    if ($len >= $max) {
-                        $i = $max;
-                        $len-= $max;
-                        $pos = 0;
-                    } else {
-                        $i = $len;
-                        $pos+= $len;
-                        $len = 0;
-                    }
-                    // ie. $i = min($max, $len), $len-= $i, $pos+= $i, $pos%= $blocksize
-                    $plaintext = substr($iv, $orig_pos) ^ $ciphertext;
-                    $iv = substr_replace($iv, substr($ciphertext, 0, $i), $orig_pos, $i);
-                }
-                if ($len >= $block_size) {
-                    $cb = substr($ciphertext, $i, $len - $len % $block_size);
-                    $plaintext.= mcrypt_generic($this->ecb, $iv . $cb) ^ $cb;
-                    $iv = substr($cb, -$block_size);
-                    $len%= $block_size;
-                }
-                if ($len) {
-                    $iv = mcrypt_generic($this->ecb, $iv);
-                    $plaintext.= $iv ^ substr($ciphertext, -$len);
-                    $iv = substr_replace($iv, substr($ciphertext, -$len), 0, $len);
-                    $pos = $len;
-                }
-
-                return $plaintext;
-            }
-
-            if ($this->paddable) {
-                // we pad with chr(0) since that's what mcrypt_generic does.  to quote from {@link http://www.php.net/function.mcrypt-generic}:
-                // "The data is padded with "\0" to make sure the length of the data is n * blocksize."
-                $ciphertext = str_pad($ciphertext, strlen($ciphertext) + ($block_size - strlen($ciphertext) % $block_size) % $block_size, chr(0));
-            }
-
-            $plaintext = mdecrypt_generic($this->demcrypt, $ciphertext);
-
-            if (!$this->continuousBuffer) {
-                mcrypt_generic_init($this->demcrypt, $this->key, $this->decryptIV);
-            }
-
-            return $this->paddable ? $this->_unpad($plaintext) : $plaintext;
-        }
-
-        if ($this->changed) {
-            $this->_setup();
-            $this->changed = false;
-        }
-        if ($this->use_inline_crypt) {
-            $inline = $this->inline_crypt;
-            return $inline('decrypt', $this, $ciphertext);
-        }
-
-        $block_size = $this->block_size;
-        if ($this->paddable) {
-            // we pad with chr(0) since that's what mcrypt_generic does [...]
-            $ciphertext = str_pad($ciphertext, strlen($ciphertext) + ($block_size - strlen($ciphertext) % $block_size) % $block_size, chr(0));
-        }
-
-        $buffer = &$this->debuffer;
-        $plaintext = '';
-        switch ($this->mode) {
-            case CRYPT_MODE_ECB:
-                for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
-                    $plaintext.= $this->_decryptBlock(substr($ciphertext, $i, $block_size));
-                }
-                break;
-            case CRYPT_MODE_CBC:
-                $xor = $this->decryptIV;
-                for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
-                    $block = substr($ciphertext, $i, $block_size);
-                    $plaintext.= $this->_decryptBlock($block) ^ $xor;
-                    $xor = $block;
-                }
-                if ($this->continuousBuffer) {
-                    $this->decryptIV = $xor;
-                }
-                break;
-            case CRYPT_MODE_CTR:
-                $xor = $this->decryptIV;
-                if (strlen($buffer['ciphertext'])) {
-                    for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
-                        $block = substr($ciphertext, $i, $block_size);
-                        if (strlen($block) > strlen($buffer['ciphertext'])) {
-                            $buffer['ciphertext'].= $this->_encryptBlock($this->_generateXor($xor, $block_size));
-                        }
-                        $key = $this->_stringShift($buffer['ciphertext'], $block_size);
-                        $plaintext.= $block ^ $key;
-                    }
-                } else {
-                    for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
-                        $block = substr($ciphertext, $i, $block_size);
-                        $key = $this->_encryptBlock($this->_generateXor($xor, $block_size));
-                        $plaintext.= $block ^ $key;
-                    }
-                }
-                if ($this->continuousBuffer) {
-                    $this->decryptIV = $xor;
-                    if ($start = strlen($ciphertext) % $block_size) {
-                        $buffer['ciphertext'] = substr($key, $start) . $buffer['ciphertext'];
-                    }
-                }
-                break;
-            case CRYPT_MODE_CFB:
-                if ($this->continuousBuffer) {
-                    $iv = &$this->decryptIV;
-                    $pos = &$buffer['pos'];
-                } else {
-                    $iv = $this->decryptIV;
-                    $pos = 0;
-                }
-                $len = strlen($ciphertext);
-                $i = 0;
-                if ($pos) {
-                    $orig_pos = $pos;
-                    $max = $block_size - $pos;
-                    if ($len >= $max) {
-                        $i = $max;
-                        $len-= $max;
-                        $pos = 0;
-                    } else {
-                        $i = $len;
-                        $pos+= $len;
-                        $len = 0;
-                    }
-                    // ie. $i = min($max, $len), $len-= $i, $pos+= $i, $pos%= $blocksize
-                    $plaintext = substr($iv, $orig_pos) ^ $ciphertext;
-                    $iv = substr_replace($iv, substr($ciphertext, 0, $i), $orig_pos, $i);
-                }
-                while ($len >= $block_size) {
-                    $iv = $this->_encryptBlock($iv);
-                    $cb = substr($ciphertext, $i, $block_size);
-                    $plaintext.= $iv ^ $cb;
-                    $iv = $cb;
-                    $len-= $block_size;
-                    $i+= $block_size;
-                }
-                if ($len) {
-                    $iv = $this->_encryptBlock($iv);
-                    $plaintext.= $iv ^ substr($ciphertext, $i);
-                    $iv = substr_replace($iv, substr($ciphertext, $i), 0, $len);
-                    $pos = $len;
-                }
-                break;
-            case CRYPT_MODE_OFB:
-                $xor = $this->decryptIV;
-                if (strlen($buffer['xor'])) {
-                    for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
-                        $block = substr($ciphertext, $i, $block_size);
-                        if (strlen($block) > strlen($buffer['xor'])) {
-                            $xor = $this->_encryptBlock($xor);
-                            $buffer['xor'].= $xor;
-                        }
-                        $key = $this->_stringShift($buffer['xor'], $block_size);
-                        $plaintext.= $block ^ $key;
-                    }
-                } else {
-                    for ($i = 0; $i < strlen($ciphertext); $i+=$block_size) {
-                        $xor = $this->_encryptBlock($xor);
-                        $plaintext.= substr($ciphertext, $i, $block_size) ^ $xor;
-                    }
-                    $key = $xor;
-                }
-                if ($this->continuousBuffer) {
-                    $this->decryptIV = $xor;
-                    if ($start = strlen($ciphertext) % $block_size) {
-                         $buffer['xor'] = substr($key, $start) . $buffer['xor'];
-                    }
-                }
-                break;
-            case CRYPT_MODE_STREAM:
-                $plaintext = $this->_decryptBlock($ciphertext);
-                break;
-        }
-        return $this->paddable ? $this->_unpad($plaintext) : $plaintext;
-    }
-
-    /**
-     * Pad "packets".
-     *
-     * Block ciphers working by encrypting between their specified [$this->]block_size at a time
-     * If you ever need to encrypt or decrypt something that isn't of the proper length, it becomes necessary to
-     * pad the input so that it is of the proper length.
-     *
-     * Padding is enabled by default.  Sometimes, however, it is undesirable to pad strings.  Such is the case in SSH,
-     * where "packets" are padded with random bytes before being encrypted.  Unpad these packets and you risk stripping
-     * away characters that shouldn't be stripped away. (SSH knows how many bytes are added because the length is
-     * transmitted separately)
-     *
-     * @see Crypt_Base::disablePadding()
-     * @access public
-     */
-    function enablePadding()
-    {
-        $this->padding = true;
-    }
-
-    /**
-     * Do not pad packets.
-     *
-     * @see Crypt_Base::enablePadding()
-     * @access public
-     */
-    function disablePadding()
-    {
-        $this->padding = false;
-    }
-
-    /**
-     * Treat consecutive "packets" as if they are a continuous buffer.
-     *
-     * Say you have a 32-byte plaintext $plaintext.  Using the default behavior, the two following code snippets
-     * will yield different outputs:
-     *
-     * <code>
-     *    echo $rijndael->encrypt(substr($plaintext,  0, 16));
-     *    echo $rijndael->encrypt(substr($plaintext, 16, 16));
-     * </code>
-     * <code>
-     *    echo $rijndael->encrypt($plaintext);
-     * </code>
-     *
-     * The solution is to enable the continuous buffer.  Although this will resolve the above discrepancy, it creates
-     * another, as demonstrated with the following:
-     *
-     * <code>
-     *    $rijndael->encrypt(substr($plaintext, 0, 16));
-     *    echo $rijndael->decrypt($rijndael->encrypt(substr($plaintext, 16, 16)));
-     * </code>
-     * <code>
-     *    echo $rijndael->decrypt($rijndael->encrypt(substr($plaintext, 16, 16)));
-     * </code>
-     *
-     * With the continuous buffer disabled, these would yield the same output.  With it enabled, they yield different
-     * outputs.  The reason is due to the fact that the initialization vector's change after every encryption /
-     * decryption round when the continuous buffer is enabled.  When it's disabled, they remain constant.
-     *
-     * Put another way, when the continuous buffer is enabled, the state of the Crypt_*() object changes after each
-     * encryption / decryption round, whereas otherwise, it'd remain constant.  For this reason, it's recommended that
-     * continuous buffers not be used.  They do offer better security and are, in fact, sometimes required (SSH uses them),
-     * however, they are also less intuitive and more likely to cause you problems.
-     *
-     * Note: Could, but not must, extend by the child Crypt_* class
-     *
-     * @see Crypt_Base::disableContinuousBuffer()
-     * @access public
-     */
-    function enableContinuousBuffer()
-    {
-        if ($this->mode == CRYPT_MODE_ECB) {
-            return;
-        }
-
-        $this->continuousBuffer = true;
-    }
-
-    /**
-     * Treat consecutive packets as if they are a discontinuous buffer.
-     *
-     * The default behavior.
-     *
-     * Note: Could, but not must, extend by the child Crypt_* class
-     *
-     * @see Crypt_Base::enableContinuousBuffer()
-     * @access public
-     */
-    function disableContinuousBuffer()
-    {
-        if ($this->mode == CRYPT_MODE_ECB) {
-            return;
-        }
-        if (!$this->continuousBuffer) {
-            return;
-        }
-
-        $this->continuousBuffer = false;
-        $this->changed = true;
-    }
-
-    /**
-     * Encrypts a block
-     *
-     * Note: Must extend by the child Crypt_* class
-     *
-     * @access private
-     * @param String $in
-     * @return String
-     */
-    function _encryptBlock($in)
-    {
-        user_error((version_compare(PHP_VERSION, '5.0.0', '>=')  ? __METHOD__ : __FUNCTION__)  . '() must extend by class ' . get_class($this), E_USER_ERROR);
-    }
-
-    /**
-     * Decrypts a block
-     *
-     * Note: Must extend by the child Crypt_* class
-     *
-     * @access private
-     * @param String $in
-     * @return String
-     */
-    function _decryptBlock($in)
-    {
-        user_error((version_compare(PHP_VERSION, '5.0.0', '>=')  ? __METHOD__ : __FUNCTION__)  . '() must extend by class ' . get_class($this), E_USER_ERROR);
-    }
-
-    /**
-     * Setup the key (expansion)
-     *
-     * Only used if $engine == CRYPT_MODE_INTERNAL
-     *
-     * Note: Must extend by the child Crypt_* class
-     *
-     * @see Crypt_Base::_setup()
-     * @access private
-     */
-    function _setupKey()
-    {
-        user_error((version_compare(PHP_VERSION, '5.0.0', '>=')  ? __METHOD__ : __FUNCTION__)  . '() must extend by class ' . get_class($this), E_USER_ERROR);
-    }
-
-    /**
-     * Setup the CRYPT_MODE_INTERNAL $engine
-     *
-     * (re)init, if necessary, the internal cipher $engine and flush all $buffers
-     * Used (only) if $engine == CRYPT_MODE_INTERNAL
-     *
-     * _setup() will be called each time if $changed === true
-     * typically this happens when using one or more of following public methods:
-     *
-     * - setKey()
-     *
-     * - setIV()
-     *
-     * - disableContinuousBuffer()
-     *
-     * - First run of encrypt() / decrypt() with no init-settings
-     *
-     * Internally: _setup() is called always before(!) en/decryption.
-     *
-     * Note: Could, but not must, extend by the child Crypt_* class
-     *
-     * @see setKey()
-     * @see setIV()
-     * @see disableContinuousBuffer()
-     * @access private
-     */
-    function _setup()
-    {
-        $this->_clearBuffers();
-        $this->_setupKey();
-
-        if ($this->use_inline_crypt) {
-            $this->_setupInlineCrypt();
-        }
-    }
-
-    /**
-     * Setup the CRYPT_MODE_MCRYPT $engine
-     *
-     * (re)init, if necessary, the (ext)mcrypt resources and flush all $buffers
-     * Used (only) if $engine = CRYPT_MODE_MCRYPT
-     *
-     * _setupMcrypt() will be called each time if $changed === true
-     * typically this happens when using one or more of following public methods:
-     *
-     * - setKey()
-     *
-     * - setIV()
-     *
-     * - disableContinuousBuffer()
-     *
-     * - First run of encrypt() / decrypt()
-     *
-     *
-     * Note: Could, but not must, extend by the child Crypt_* class
-     *
-     * @see setKey()
-     * @see setIV()
-     * @see disableContinuousBuffer()
-     * @access private
-     */
-    function _setupMcrypt()
-    {
-        $this->_clearBuffers();
-        $this->enchanged = $this->dechanged = true;
-
-        if (!isset($this->enmcrypt)) {
-            static $mcrypt_modes = array(
-                CRYPT_MODE_CTR    => 'ctr',
-                CRYPT_MODE_ECB    => MCRYPT_MODE_ECB,
-                CRYPT_MODE_CBC    => MCRYPT_MODE_CBC,
-                CRYPT_MODE_CFB    => 'ncfb',
-                CRYPT_MODE_OFB    => MCRYPT_MODE_NOFB,
-                CRYPT_MODE_STREAM => MCRYPT_MODE_STREAM,
-            );
-
-            $this->demcrypt = mcrypt_module_open($this->cipher_name_mcrypt, '', $mcrypt_modes[$this->mode], '');
-            $this->enmcrypt = mcrypt_module_open($this->cipher_name_mcrypt, '', $mcrypt_modes[$this->mode], '');
-
-            // we need the $ecb mcrypt resource (only) in MODE_CFB with enableContinuousBuffer()
-            // to workaround mcrypt's broken ncfb implementation in buffered mode
-            // see: {@link http://phpseclib.sourceforge.net/cfb-demo.phps}
-            if ($this->mode == CRYPT_MODE_CFB) {
-                $this->ecb = mcrypt_module_open($this->cipher_name_mcrypt, '', MCRYPT_MODE_ECB, '');
-            }
-
-        } // else should mcrypt_generic_deinit be called?
-
-        if ($this->mode == CRYPT_MODE_CFB) {
-            mcrypt_generic_init($this->ecb, $this->key, str_repeat("\0", $this->block_size));
-        }
-    }
-
-    /**
-     * Pads a string
-     *
-     * Pads a string using the RSA PKCS padding standards so that its length is a multiple of the blocksize.
-     * $this->block_size - (strlen($text) % $this->block_size) bytes are added, each of which is equal to
-     * chr($this->block_size - (strlen($text) % $this->block_size)
-     *
-     * If padding is disabled and $text is not a multiple of the blocksize, the string will be padded regardless
-     * and padding will, hence forth, be enabled.
-     *
-     * @see Crypt_Base::_unpad()
-     * @param String $text
-     * @access private
-     * @return String
-     */
-    function _pad($text)
-    {
-        $length = strlen($text);
-
-        if (!$this->padding) {
-            if ($length % $this->block_size == 0) {
-                return $text;
-            } else {
-                user_error("The plaintext's length ($length) is not a multiple of the block size ({$this->block_size})");
-                $this->padding = true;
-            }
-        }
-
-        $pad = $this->block_size - ($length % $this->block_size);
-
-        return str_pad($text, $length + $pad, chr($pad));
-    }
-
-    /**
-     * Unpads a string.
-     *
-     * If padding is enabled and the reported padding length is invalid the encryption key will be assumed to be wrong
-     * and false will be returned.
-     *
-     * @see Crypt_Base::_pad()
-     * @param String $text
-     * @access private
-     * @return String
-     */
-    function _unpad($text)
-    {
-        if (!$this->padding) {
-            return $text;
-        }
-
-        $length = ord($text[strlen($text) - 1]);
-
-        if (!$length || $length > $this->block_size) {
-            return false;
-        }
-
-        return substr($text, 0, -$length);
-    }
-
-    /**
-     * Clears internal buffers
-     *
-     * Clearing/resetting the internal buffers is done everytime
-     * after disableContinuousBuffer() or on cipher $engine (re)init
-     * ie after setKey() or setIV()
-     *
-     * Note: Could, but not must, extend by the child Crypt_* class
-     *
-     * @access public
-     */
-    function _clearBuffers()
-    {
-        $this->enbuffer = array('encrypted'  => '', 'xor' => '', 'pos' => 0, 'enmcrypt_init' => true);
-        $this->debuffer = array('ciphertext' => '', 'xor' => '', 'pos' => 0, 'demcrypt_init' => true);
-
-        // mcrypt's handling of invalid's $iv:
-        // $this->encryptIV = $this->decryptIV = strlen($this->iv) == $this->block_size ? $this->iv : str_repeat("\0", $this->block_size);
-        $this->encryptIV = $this->decryptIV = str_pad(substr($this->iv, 0, $this->block_size), $this->block_size, "\0");
-    }
-
-    /**
-     * String Shift
-     *
-     * Inspired by array_shift
-     *
-     * @param String $string
-     * @param optional Integer $index
-     * @access private
-     * @return String
-     */
-    function _stringShift(&$string, $index = 1)
-    {
-        $substr = substr($string, 0, $index);
-        $string = substr($string, $index);
-        return $substr;
-    }
-
-    /**
-     * Generate CTR XOR encryption key
-     *
-     * Encrypt the output of this and XOR it against the ciphertext / plaintext to get the
-     * plaintext / ciphertext in CTR mode.
-     *
-     * @see Crypt_Base::decrypt()
-     * @see Crypt_Base::encrypt()
-     * @param String $iv
-     * @param Integer $length
-     * @access private
-     * @return String $xor
-     */
-    function _generateXor(&$iv, $length)
-    {
-        $xor = '';
-        $block_size = $this->block_size;
-        $num_blocks = floor(($length + ($block_size - 1)) / $block_size);
-        for ($i = 0; $i < $num_blocks; $i++) {
-            $xor.= $iv;
-            for ($j = 4; $j <= $block_size; $j+= 4) {
-                $temp = substr($iv, -$j, 4);
-                switch ($temp) {
-                    case "\xFF\xFF\xFF\xFF":
-                        $iv = substr_replace($iv, "\x00\x00\x00\x00", -$j, 4);
-                        break;
-                    case "\x7F\xFF\xFF\xFF":
-                        $iv = substr_replace($iv, "\x80\x00\x00\x00", -$j, 4);
-                        break 2;
-                    default:
-                        extract(unpack('Ncount', $temp));
-                        $iv = substr_replace($iv, pack('N', $count + 1), -$j, 4);
-                        break 2;
-                }
-            }
-        }
-
-        return $xor;
-    }
-
-    /**
-     * Setup the performance-optimized function for de/encrypt()
-     *
-     * Stores the created (or existing) callback function-name
-     * in $this->inline_crypt
-     *
-     * Internally for phpseclib developers:
-     *
-     *     _setupInlineCrypt() would be called only if:
-     *
-     *     - $engine == CRYPT_MODE_INTERNAL and
-     *
-     *     - $use_inline_crypt === true
-     *
-     *     - each time on _setup(), after(!) _setupKey()
-     *
-     *
-     *     This ensures that _setupInlineCrypt() has always a
-     *     full ready2go initializated internal cipher $engine state
-     *     where, for example, the keys allready expanded,
-     *     keys/block_size calculated and such.
-     *
-     *     It is, each time if called, the responsibility of _setupInlineCrypt():
-     *
-     *     - to set $this->inline_crypt to a valid and fully working callback function
-     *       as a (faster) replacement for encrypt() / decrypt()
-     *
-     *     - NOT to create unlimited callback functions (for memory reasons!)
-     *       no matter how often _setupInlineCrypt() would be called. At some
-     *       point of amount they must be generic re-useable.
-     *
-     *     - the code of _setupInlineCrypt() it self,
-     *       and the generated callback code,
-     *       must be, in following order:
-     *       - 100% safe
-     *       - 100% compatible to encrypt()/decrypt()
-     *       - using only php5+ features/lang-constructs/php-extensions if
-     *         compatibility (down to php4) or fallback is provided
-     *       - readable/maintainable/understandable/commented and... not-cryptic-styled-code :-)
-     *       - >= 10% faster than encrypt()/decrypt() [which is, by the way,
-     *         the reason for the existence of _setupInlineCrypt() :-)]
-     *       - memory-nice
-     *       - short (as good as possible)
-     *
-     * Note: - _setupInlineCrypt() is using _createInlineCryptFunction() to create the full callback function code.
-     *       - In case of using inline crypting, _setupInlineCrypt() must extend by the child Crypt_* class.
-     *       - The following variable names are reserved:
-     *         - $_*  (all variable names prefixed with an underscore)
-     *         - $self (object reference to it self. Do not use $this, but $self instead)
-     *         - $in (the content of $in has to en/decrypt by the generated code)
-     *       - The callback function should not use the 'return' statement, but en/decrypt'ing the content of $in only
-     *
-     *
-     * @see Crypt_Base::_setup()
-     * @see Crypt_Base::_createInlineCryptFunction()
-     * @see Crypt_Base::encrypt()
-     * @see Crypt_Base::decrypt()
-     * @access private
-     */
-    function _setupInlineCrypt()
-    {
-        // If a Crypt_* class providing inline crypting it must extend _setupInlineCrypt()
-
-        // If, for any reason, an extending Crypt_Base() Crypt_* class
-        // not using inline crypting then it must be ensured that: $this->use_inline_crypt = false
-        // ie in the class var declaration of $use_inline_crypt in general for the Crypt_* class,
-        // in the constructor at object instance-time
-        // or, if it's runtime-specific, at runtime
-
-        $this->use_inline_crypt = false;
-    }
-
-    /**
-     * Creates the performance-optimized function for en/decrypt()
-     *
-     * Internally for phpseclib developers:
-     *
-     *    _createInlineCryptFunction():
-     *
-     *    - merge the $cipher_code [setup'ed by _setupInlineCrypt()]
-     *      with the current [$this->]mode of operation code
-     *
-     *    - create the $inline function, which called by encrypt() / decrypt()
-     *      as its replacement to speed up the en/decryption operations.
-     *
-     *    - return the name of the created $inline callback function
-     *
-     *    - used to speed up en/decryption
-     *
-     *
-     *
-     *    The main reason why can speed up things [up to 50%] this way are:
-     *
-     *    - using variables more effective then regular.
-     *      (ie no use of expensive arrays but integers $k_0, $k_1 ...
-     *      or even, for example, the pure $key[] values hardcoded)
-     *
-     *    - avoiding 1000's of function calls of ie _encryptBlock()
-     *      but inlining the crypt operations.
-     *      in the mode of operation for() loop.
-     *
-     *    - full loop unroll the (sometimes key-dependent) rounds
-     *      avoiding this way ++$i counters and runtime-if's etc...
-     *
-     *    The basic code architectur of the generated $inline en/decrypt()
-     *    lambda function, in pseudo php, is:
-     *
-     *    <code>
-     *    +----------------------------------------------------------------------------------------------+
-     *    | callback $inline = create_function:                                                          |
-     *    | lambda_function_0001_crypt_ECB($action, $text)                                               |
-     *    | {                                                                                            |
-     *    |     INSERT PHP CODE OF:                                                                      |
-     *    |     $cipher_code['init_crypt'];                  // general init code.                       |
-     *    |                                                  // ie: $sbox'es declarations used for       |
-     *    |                                                  //     encrypt and decrypt'ing.             |
-     *    |                                                                                              |
-     *    |     switch ($action) {                                                                       |
-     *    |         case 'encrypt':                                                                      |
-     *    |             INSERT PHP CODE OF:                                                              |
-     *    |             $cipher_code['init_encrypt'];       // encrypt sepcific init code.               |
-     *    |                                                    ie: specified $key or $box                |
-     *    |                                                        declarations for encrypt'ing.         |
-     *    |                                                                                              |
-     *    |             foreach ($ciphertext) {                                                          |
-     *    |                 $in = $block_size of $ciphertext;                                            |
-     *    |                                                                                              |
-     *    |                 INSERT PHP CODE OF:                                                          |
-     *    |                 $cipher_code['encrypt_block'];  // encrypt's (string) $in, which is always:  |
-     *    |                                                 // strlen($in) == $this->block_size          |
-     *    |                                                 // here comes the cipher algorithm in action |
-     *    |                                                 // for encryption.                           |
-     *    |                                                 // $cipher_code['encrypt_block'] has to      |
-     *    |                                                 // encrypt the content of the $in variable   |
-     *    |                                                                                              |
-     *    |                 $plaintext .= $in;                                                           |
-     *    |             }                                                                                |
-     *    |             return $plaintext;                                                               |
-     *    |                                                                                              |
-     *    |         case 'decrypt':                                                                      |
-     *    |             INSERT PHP CODE OF:                                                              |
-     *    |             $cipher_code['init_decrypt'];       // decrypt sepcific init code                |
-     *    |                                                    ie: specified $key or $box                |
-     *    |                                                        declarations for decrypt'ing.         |
-     *    |             foreach ($plaintext) {                                                           |
-     *    |                 $in = $block_size of $plaintext;                                             |
-     *    |                                                                                              |
-     *    |                 INSERT PHP CODE OF:                                                          |
-     *    |                 $cipher_code['decrypt_block'];  // decrypt's (string) $in, which is always   |
-     *    |                                                 // strlen($in) == $this->block_size          |
-     *    |                                                 // here comes the cipher algorithm in action |
-     *    |                                                 // for decryption.                           |
-     *    |                                                 // $cipher_code['decrypt_block'] has to      |
-     *    |                                                 // decrypt the content of the $in variable   |
-     *    |                 $ciphertext .= $in;                                                          |
-     *    |             }                                                                                |
-     *    |             return $ciphertext;                                                              |
-     *    |     }                                                                                        |
-     *    | }                                                                                            |
-     *    +----------------------------------------------------------------------------------------------+
-     *    </code>
-     *
-     *    See also the Crypt_*::_setupInlineCrypt()'s for
-     *    productive inline $cipher_code's how they works.
-     *
-     *    Structure of:
-     *    <code>
-     *    $cipher_code = array(
-     *        'init_crypt'    => (string) '', // optional
-     *        'init_encrypt'  => (string) '', // optional
-     *        'init_decrypt'  => (string) '', // optional
-     *        'encrypt_block' => (string) '', // required
-     *        'decrypt_block' => (string) ''  // required
-     *    );
-     *    </code>
-     *
-     * @see Crypt_Base::_setupInlineCrypt()
-     * @see Crypt_Base::encrypt()
-     * @see Crypt_Base::decrypt()
-     * @param Array $cipher_code
-     * @access private
-     * @return String (the name of the created callback function)
-     */
-    function _createInlineCryptFunction($cipher_code)
-    {
-        $block_size = $this->block_size;
-
-        // optional
-        $init_crypt    = isset($cipher_code['init_crypt'])    ? $cipher_code['init_crypt']    : '';
-        $init_encrypt  = isset($cipher_code['init_encrypt'])  ? $cipher_code['init_encrypt']  : '';
-        $init_decrypt  = isset($cipher_code['init_decrypt'])  ? $cipher_code['init_decrypt']  : '';
-        // required
-        $encrypt_block = $cipher_code['encrypt_block'];
-        $decrypt_block = $cipher_code['decrypt_block'];
-
-        // Generating mode of operation inline code,
-        // merged with the $cipher_code algorithm
-        // for encrypt- and decryption.
-        switch ($this->mode) {
-            case CRYPT_MODE_ECB:
-                $encrypt = $init_encrypt . '
-                    $_ciphertext = "";
-                    $_text = $self->_pad($_text);
-                    $_plaintext_len = strlen($_text);
-
-                    for ($_i = 0; $_i < $_plaintext_len; $_i+= '.$block_size.') {
-                        $in = substr($_text, $_i, '.$block_size.');
-                        '.$encrypt_block.'
-                        $_ciphertext.= $in;
-                    }
-
-                    return $_ciphertext;
-                    ';
-
-                $decrypt = $init_decrypt . '
-                    $_plaintext = "";
-                    $_text = str_pad($_text, strlen($_text) + ('.$block_size.' - strlen($_text) % '.$block_size.') % '.$block_size.', chr(0));
-                    $_ciphertext_len = strlen($_text);
-
-                    for ($_i = 0; $_i < $_ciphertext_len; $_i+= '.$block_size.') {
-                        $in = substr($_text, $_i, '.$block_size.');
-                        '.$decrypt_block.'
-                        $_plaintext.= $in;
-                    }
-
-                    return $self->_unpad($_plaintext);
-                    ';
-                break;
-            case CRYPT_MODE_CTR:
-                $encrypt = $init_encrypt . '
-                    $_ciphertext = "";
-                    $_plaintext_len = strlen($_text);
-                    $_xor = $self->encryptIV;
-                    $_buffer = &$self->enbuffer;
-
-                    if (strlen($_buffer["encrypted"])) {
-                        for ($_i = 0; $_i < $_plaintext_len; $_i+= '.$block_size.') {
-                            $_block = substr($_text, $_i, '.$block_size.');
-                            if (strlen($_block) > strlen($_buffer["encrypted"])) {
-                                $in = $self->_generateXor($_xor, '.$block_size.');
-                                '.$encrypt_block.'
-                                $_buffer["encrypted"].= $in;
-                            }
-                            $_key = $self->_stringShift($_buffer["encrypted"], '.$block_size.');
-                            $_ciphertext.= $_block ^ $_key;
-                        }
-                    } else {
-                        for ($_i = 0; $_i < $_plaintext_len; $_i+= '.$block_size.') {
-                            $_block = substr($_text, $_i, '.$block_size.');
-                            $in = $self->_generateXor($_xor, '.$block_size.');
-                            '.$encrypt_block.'
-                            $_key = $in;
-                            $_ciphertext.= $_block ^ $_key;
-                        }
-                    }
-                    if ($self->continuousBuffer) {
-                        $self->encryptIV = $_xor;
-                        if ($_start = $_plaintext_len % '.$block_size.') {
-                            $_buffer["encrypted"] = substr($_key, $_start) . $_buffer["encrypted"];
-                        }
-                    }
-
-                    return $_ciphertext;
-                ';
-
-                $decrypt = $init_encrypt . '
-                    $_plaintext = "";
-                    $_ciphertext_len = strlen($_text);
-                    $_xor = $self->decryptIV;
-                    $_buffer = &$self->debuffer;
-
-                    if (strlen($_buffer["ciphertext"])) {
-                        for ($_i = 0; $_i < $_ciphertext_len; $_i+= '.$block_size.') {
-                            $_block = substr($_text, $_i, '.$block_size.');
-                            if (strlen($_block) > strlen($_buffer["ciphertext"])) {
-                                $in = $self->_generateXor($_xor, '.$block_size.');
-                                '.$encrypt_block.'
-                                $_buffer["ciphertext"].= $in;
-                            }
-                            $_key = $self->_stringShift($_buffer["ciphertext"], '.$block_size.');
-                            $_plaintext.= $_block ^ $_key;
-                        }
-                    } else {
-                        for ($_i = 0; $_i < $_ciphertext_len; $_i+= '.$block_size.') {
-                            $_block = substr($_text, $_i, '.$block_size.');
-                            $in = $self->_generateXor($_xor, '.$block_size.');
-                            '.$encrypt_block.'
-                            $_key = $in;
-                            $_plaintext.= $_block ^ $_key;
-                        }
-                    }
-                    if ($self->continuousBuffer) {
-                        $self->decryptIV = $_xor;
-                        if ($_start = $_ciphertext_len % '.$block_size.') {
-                            $_buffer["ciphertext"] = substr($_key, $_start) . $_buffer["ciphertext"];
-                        }
-                    }
-
-                    return $_plaintext;
-                    ';
-                break;
-            case CRYPT_MODE_CFB:
-                $encrypt = $init_encrypt . '
-                    $_ciphertext = "";
-                    $_buffer = &$self->enbuffer;
-
-                    if ($self->continuousBuffer) {
-                        $_iv = &$self->encryptIV;
-                        $_pos = &$_buffer["pos"];
-                    } else {
-                        $_iv = $self->encryptIV;
-                        $_pos = 0;
-                    }
-                    $_len = strlen($_text);
-                    $_i = 0;
-                    if ($_pos) {
-                        $_orig_pos = $_pos;
-                        $_max = '.$block_size.' - $_pos;
-                        if ($_len >= $_max) {
-                            $_i = $_max;
-                            $_len-= $_max;
-                            $_pos = 0;
-                        } else {
-                            $_i = $_len;
-                            $_pos+= $_len;
-                            $_len = 0;
-                        }
-                        $_ciphertext = substr($_iv, $_orig_pos) ^ $_text;
-                        $_iv = substr_replace($_iv, $_ciphertext, $_orig_pos, $_i);
-                    }
-                    while ($_len >= '.$block_size.') {
-                        $in = $_iv;
-                        '.$encrypt_block.';
-                        $_iv = $in ^ substr($_text, $_i, '.$block_size.');
-                        $_ciphertext.= $_iv;
-                        $_len-= '.$block_size.';
-                        $_i+= '.$block_size.';
-                    }
-                    if ($_len) {
-                        $in = $_iv;
-                        '.$encrypt_block.'
-                        $_iv = $in;
-                        $_block = $_iv ^ substr($_text, $_i);
-                        $_iv = substr_replace($_iv, $_block, 0, $_len);
-                        $_ciphertext.= $_block;
-                        $_pos = $_len;
-                    }
-                    return $_ciphertext;
-                ';
-
-                $decrypt = $init_encrypt . '
-                    $_plaintext = "";
-                    $_buffer = &$self->debuffer;
-
-                    if ($self->continuousBuffer) {
-                        $_iv = &$self->decryptIV;
-                        $_pos = &$_buffer["pos"];
-                    } else {
-                        $_iv = $self->decryptIV;
-                        $_pos = 0;
-                    }
-                    $_len = strlen($_text);
-                    $_i = 0;
-                    if ($_pos) {
-                        $_orig_pos = $_pos;
-                        $_max = '.$block_size.' - $_pos;
-                        if ($_len >= $_max) {
-                            $_i = $_max;
-                            $_len-= $_max;
-                            $_pos = 0;
-                        } else {
-                            $_i = $_len;
-                            $_pos+= $_len;
-                            $_len = 0;
-                        }
-                        $_plaintext = substr($_iv, $_orig_pos) ^ $_text;
-                        $_iv = substr_replace($_iv, substr($_text, 0, $_i), $_orig_pos, $_i);
-                    }
-                    while ($_len >= '.$block_size.') {
-                        $in = $_iv;
-                        '.$encrypt_block.'
-                        $_iv = $in;
-                        $cb = substr($_text, $_i, '.$block_size.');
-                        $_plaintext.= $_iv ^ $cb;
-                        $_iv = $cb;
-                        $_len-= '.$block_size.';
-                        $_i+= '.$block_size.';
-                    }
-                    if ($_len) {
-                        $in = $_iv;
-                        '.$encrypt_block.'
-                        $_iv = $in;
-                        $_plaintext.= $_iv ^ substr($_text, $_i);
-                        $_iv = substr_replace($_iv, substr($_text, $_i), 0, $_len);
-                        $_pos = $_len;
-                    }
-
-                    return $_plaintext;
-                    ';
-                break;
-            case CRYPT_MODE_OFB:
-                $encrypt = $init_encrypt . '
-                    $_ciphertext = "";
-                    $_plaintext_len = strlen($_text);
-                    $_xor = $self->encryptIV;
-                    $_buffer = &$self->enbuffer;
-
-                    if (strlen($_buffer["xor"])) {
-                        for ($_i = 0; $_i < $_plaintext_len; $_i+= '.$block_size.') {
-                            $_block = substr($_text, $_i, '.$block_size.');
-                            if (strlen($_block) > strlen($_buffer["xor"])) {
-                                $in = $_xor;
-                                '.$encrypt_block.'
-                                $_xor = $in;
-                                $_buffer["xor"].= $_xor;
-                            }
-                            $_key = $self->_stringShift($_buffer["xor"], '.$block_size.');
-                            $_ciphertext.= $_block ^ $_key;
-                        }
-                    } else {
-                        for ($_i = 0; $_i < $_plaintext_len; $_i+= '.$block_size.') {
-                            $in = $_xor;
-                            '.$encrypt_block.'
-                            $_xor = $in;
-                            $_ciphertext.= substr($_text, $_i, '.$block_size.') ^ $_xor;
-                        }
-                        $_key = $_xor;
-                    }
-                    if ($self->continuousBuffer) {
-                        $self->encryptIV = $_xor;
-                        if ($_start = $_plaintext_len % '.$block_size.') {
-                             $_buffer["xor"] = substr($_key, $_start) . $_buffer["xor"];
-                        }
-                    }
-                    return $_ciphertext;
-                    ';
-
-                $decrypt = $init_encrypt . '
-                    $_plaintext = "";
-                    $_ciphertext_len = strlen($_text);
-                    $_xor = $self->decryptIV;
-                    $_buffer = &$self->debuffer;
-
-                    if (strlen($_buffer["xor"])) {
-                        for ($_i = 0; $_i < $_ciphertext_len; $_i+= '.$block_size.') {
-                            $_block = substr($_text, $_i, '.$block_size.');
-                            if (strlen($_block) > strlen($_buffer["xor"])) {
-                                $in = $_xor;
-                                '.$encrypt_block.'
-                                $_xor = $in;
-                                $_buffer["xor"].= $_xor;
-                            }
-                            $_key = $self->_stringShift($_buffer["xor"], '.$block_size.');
-                            $_plaintext.= $_block ^ $_key;
-                        }
-                    } else {
-                        for ($_i = 0; $_i < $_ciphertext_len; $_i+= '.$block_size.') {
-                            $in = $_xor;
-                            '.$encrypt_block.'
-                            $_xor = $in;
-                            $_plaintext.= substr($_text, $_i, '.$block_size.') ^ $_xor;
-                        }
-                        $_key = $_xor;
-                    }
-                    if ($self->continuousBuffer) {
-                        $self->decryptIV = $_xor;
-                        if ($_start = $_ciphertext_len % '.$block_size.') {
-                             $_buffer["xor"] = substr($_key, $_start) . $_buffer["xor"];
-                        }
-                    }
-                    return $_plaintext;
-                    ';
-                break;
-            case CRYPT_MODE_STREAM:
-                $encrypt = $init_encrypt . '
-                    $_ciphertext = "";
-                    '.$encrypt_block.'
-                    return $_ciphertext;
-                    ';
-                $decrypt = $init_decrypt . '
-                    $_plaintext = "";
-                    '.$decrypt_block.'
-                    return $_plaintext;
-                    ';
-                break;
-            // case CRYPT_MODE_CBC:
-            default:
-                $encrypt = $init_encrypt . '
-                    $_ciphertext = "";
-                    $_text = $self->_pad($_text);
-                    $_plaintext_len = strlen($_text);
-
-                    $in = $self->encryptIV;
-
-                    for ($_i = 0; $_i < $_plaintext_len; $_i+= '.$block_size.') {
-                        $in = substr($_text, $_i, '.$block_size.') ^ $in;
-                        '.$encrypt_block.'
-                        $_ciphertext.= $in;
-                    }
-
-                    if ($self->continuousBuffer) {
-                        $self->encryptIV = $in;
-                    }
-
-                    return $_ciphertext;
-                    ';
-
-                $decrypt = $init_decrypt . '
-                    $_plaintext = "";
-                    $_text = str_pad($_text, strlen($_text) + ('.$block_size.' - strlen($_text) % '.$block_size.') % '.$block_size.', chr(0));
-                    $_ciphertext_len = strlen($_text);
-
-                    $_iv = $self->decryptIV;
-
-                    for ($_i = 0; $_i < $_ciphertext_len; $_i+= '.$block_size.') {
-                        $in = $_block = substr($_text, $_i, '.$block_size.');
-                        '.$decrypt_block.'
-                        $_plaintext.= $in ^ $_iv;
-                        $_iv = $_block;
-                    }
-
-                    if ($self->continuousBuffer) {
-                        $self->decryptIV = $_iv;
-                    }
-
-                    return $self->_unpad($_plaintext);
-                    ';
-                break;
-        }
-
-        // Create the $inline function and return its name as string. Ready to run!
-        return create_function('$_action, &$self, $_text', $init_crypt . 'if ($_action == "encrypt") { ' . $encrypt . ' } else { ' . $decrypt . ' }');
-    }
-
-    /**
-     * Holds the lambda_functions table (classwide)
-     *
-     * Each name of the lambda function, created from
-     * _setupInlineCrypt() && _createInlineCryptFunction()
-     * is stored, classwide (!), here for reusing.
-     *
-     * The string-based index of $function is a classwide
-     * uniqe value representing, at least, the $mode of
-     * operation (or more... depends of the optimizing level)
-     * for which $mode the lambda function was created.
-     *
-     * @access private
-     * @return &Array
-     */
-    function &_getLambdaFunctions()
-    {
-        static $functions = array();
-        return $functions;
-    }
-}