simplecov 0.22.0 → 1.1.1

data/lib/simplecov/configuration.rb

@@ -1,8 +1,6 @@
 # frozen_string_literal: true
 
 require "fileutils"
-require "docile"
-require_relative "formatter/multi_formatter"
 
 module SimpleCov
   #
@@ -11,8 +9,6 @@ module SimpleCov
   # SimpleCov documentation for further info.
   #
   module Configuration
-    attr_writer :filters, :groups, :formatter, :print_error_status
-
     #
     # The root for the project. This defaults to the
     # current working directory.
@@ -22,7 +18,7 @@ module SimpleCov
     def root(root = nil)
       return @root if defined?(@root) && root.nil?
 
-      @coverage_path = nil # invalidate cache
+      @coverage_path = nil unless @coverage_path_explicit # invalidate cache
       @root = File.expand_path(root || Dir.getwd)
     end
 
@@ -34,467 +30,134 @@ module SimpleCov
     def coverage_dir(dir = nil)
       return @coverage_dir if defined?(@coverage_dir) && dir.nil?
 
-      @coverage_path = nil # invalidate cache
-      @coverage_dir = (dir || "coverage")
-    end
-
-    #
-    # Returns the full path to the output directory using SimpleCov.root
-    # and SimpleCov.coverage_dir, so you can adjust this by configuring those
-    # values. Will create the directory if it's missing
-    #
-    def coverage_path
-      @coverage_path ||= begin
-        coverage_path = File.expand_path(coverage_dir, root)
-        FileUtils.mkdir_p coverage_path
-        coverage_path
-      end
-    end
-
-    #
-    # Coverage results will always include files matched by this glob, whether
-    # or not they were explicitly required. Without this, un-required files
-    # will not be present in the final report.
-    #
-    def track_files(glob)
-      @tracked_files = glob
-    end
-
-    #
-    # Returns the glob that will be used to include files that were not
-    # explicitly required.
-    #
-    def tracked_files
-      @tracked_files if defined?(@tracked_files)
-    end
-
-    #
-    # Returns the list of configured filters. Add filters using SimpleCov.add_filter.
-    #
-    def filters
-      @filters ||= []
-    end
-
-    # The name of the command (a.k.a. Test Suite) currently running. Used for result
-    # merging and caching. It first tries to make a guess based upon the command line
-    # arguments the current test suite is running on and should automatically detect
-    # unit tests, functional tests, integration tests, rpsec and cucumber and label
-    # them properly. If it fails to recognize the current command, the command name
-    # is set to the shell command that the current suite is running on.
-    #
-    # You can specify it manually with SimpleCov.command_name("test:units") - please
-    # also check out the corresponding section in README.rdoc
-    def command_name(name = nil)
-      @name = name unless name.nil?
-      @name ||= SimpleCov::CommandGuesser.guess
-      @name
+      @coverage_path = nil unless @coverage_path_explicit # invalidate cache
+      @coverage_dir_explicit = true unless dir.nil?
+      @coverage_dir = dir || "coverage"
     end
 
     #
-    # Gets or sets the configured formatter.
+    # Returns the full path to the output directory. By default
+    # constructed from `SimpleCov.root` + `SimpleCov.coverage_dir`, but
+    # callers can override with an arbitrary absolute path — handy for
+    # out-of-tree build directories. See #716.
     #
-    # Configure with: SimpleCov.formatter(SimpleCov::Formatter::SimpleFormatter)
+    # Reading is pure: the directory is only created when a path is
+    # explicitly assigned (the user has signaled they intend to write
+    # there). The codepaths that actually write into the directory
+    # (formatters, `LastRun`, `ResultsetStore`) ensure existence
+    # themselves, so read-only CLI subcommands that interpolate the
+    # path into status text don't materialize a stray `coverage/`
+    # directory.
     #
-    def formatter(formatter = nil)
-      return @formatter if defined?(@formatter) && formatter.nil?
-
-      @formatter = formatter
-      raise "No formatter configured. Please specify a formatter using SimpleCov.formatter = SimpleCov::Formatter::SimpleFormatter" unless @formatter
-
-      @formatter
-    end
-
-    #
-    # Sets the configured formatters.
-    #
-    def formatters=(formatters)
-      @formatter = SimpleCov::Formatter::MultiFormatter.new(formatters)
-    end
-
-    #
-    # Gets the configured formatters.
-    #
-    def formatters
-      if @formatter.is_a?(SimpleCov::Formatter::MultiFormatter)
-        @formatter.formatters
-      else
-        Array(formatter)
+    def coverage_path(path = nil)
+      if path
+        expanded = File.expand_path(path)
+        @coverage_path = expanded
+        @coverage_path_explicit = true
+        FileUtils.mkdir_p expanded
       end
-    end
-
-    #
-    # Whether we should print non-success status codes. This can be
-    # configured with the #print_error_status= method.
-    #
-    def print_error_status
-      defined?(@print_error_status) ? @print_error_status : true
-    end
 
-    #
-    # Certain code blocks (i.e. Ruby-implementation specific code) can be excluded from
-    # the coverage metrics by wrapping it inside # :nocov: comment blocks. The nocov token
-    # can be configured to be any other string using this.
-    #
-    # Configure with SimpleCov.nocov_token('skip') or it's alias SimpleCov.skip_token('skip')
-    #
-    def nocov_token(nocov_token = nil)
-      return @nocov_token if defined?(@nocov_token) && nocov_token.nil?
-
-      @nocov_token = (nocov_token || "nocov")
+      @coverage_path ||= File.expand_path(coverage_dir, root)
     end
-    alias skip_token nocov_token
 
     #
-    # Returns the configured groups. Add groups using SimpleCov.add_group
+    # The name of the command (a.k.a. Test Suite) currently running.
+    # Used for result merging and caching. Auto-detected; set explicitly
+    # with SimpleCov.command_name("test:units").
     #
-    def groups
-      @groups ||= {}
+    def command_name(name = nil)
+      @command_name = name unless name.nil?
+      @command_name ||= SimpleCov::CommandGuesser.guess
     end
 
-    #
     # Returns the hash of available profiles
-    #
     def profiles
       @profiles ||= SimpleCov::Profiles.new
     end
 
-    def adapters
-      warn "#{Kernel.caller.first}: [DEPRECATION] #adapters is deprecated. Use #profiles instead."
-      profiles
-    end
-
-    #
-    # Allows you to configure simplecov in a block instead of prepending SimpleCov to all config methods
-    # you're calling.
-    #
-    #     SimpleCov.configure do
-    #       add_filter 'foobar'
-    #     end
     #
-    # This is equivalent to SimpleCov.add_filter 'foobar' and thus makes it easier to set a bunch of configure
-    # options at once.
+    # Allows you to configure simplecov in a block instead of
+    # prepending SimpleCov to each config method. Parameterized blocks retain
+    # their caller context and receive this configuration target explicitly.
     #
     def configure(&block)
-      Docile.dsl_eval(self, &block)
+      raise ArgumentError, "configuration block required" unless block
+
+      if block.parameters.empty?
+        instance_exec(&(_ = block))
+      else
+        yield self
+      end
+      self
     end
 
     #
     # Gets or sets the behavior to process coverage results.
-    #
-    # By default, it will call SimpleCov.result.format!
-    #
-    # Configure with:
-    #
-    #     SimpleCov.at_exit do
-    #       puts "Coverage done"
-    #       SimpleCov.result.format!
-    #     end
+    # By default, it stores/merges the current result and formats only
+    # from the final reporting process.
     #
     def at_exit(&block)
-      return Proc.new unless running || block_given?
-
-      @at_exit = block if block_given?
-      @at_exit ||= proc { SimpleCov.result.format! }
-    end
-
-    # gets or sets the enabled_for_subprocess configuration
-    # when true, this will inject SimpleCov code into Process.fork
-    def enable_for_subprocesses(value = nil)
-      return @enable_for_subprocesses if defined?(@enable_for_subprocesses) && value.nil?
-
-      @enable_for_subprocesses = value || false
+      @at_exit = block if block
+      configured = @at_exit
+      return configured if configured
+      return proc {} unless active_session?
+
+      @at_exit = proc do
+        result = SimpleCov.result
+        result.format! if result && SimpleCov.merge_finalization_owner?
+      end
     end
 
-    # gets the enabled_for_subprocess configuration
-    def enabled_for_subprocesses?
-      enable_for_subprocesses
+    # Whether SimpleCov has anything to do at exit: the Coverage module
+    # is actively tracking, or a `@result` has already been assembled
+    # (e.g. by `SimpleCov.collate`, which never starts Coverage).
+    def active_session?
+      SimpleCov.result? || (defined?(Coverage) && Coverage.running?)
     end
 
     #
     # Gets or sets the behavior to start a new forked Process.
-    #
-    # By default, it will add " (Process #{pid})" to the command_name, and start SimpleCov in quiet mode
-    #
-    # Configure with:
-    #
-    #     SimpleCov.at_fork do |pid|
-    #       SimpleCov.start do
-    #         # This needs a unique name so it won't be ovewritten
-    #         SimpleCov.command_name "#{SimpleCov.command_name} (subprocess: #{pid})"
-    #         # be quiet, the parent process will be in charge of using the regular formatter and checking coverage totals
-    #         SimpleCov.print_error_status = false
-    #         SimpleCov.formatter SimpleCov::Formatter::SimpleFormatter
-    #         SimpleCov.minimum_coverage 0
-    #         # start
-    #         SimpleCov.start
-    #       end
-    #     end
+    # Defaults to adding " (subprocess: #{serial})" to command_name and
+    # starting SimpleCov in quiet mode.
     #
     def at_fork(&block)
-      @at_fork = block if block_given?
-      @at_fork ||= lambda { |pid|
-        # This needs a unique name so it won't be ovewritten
-        SimpleCov.command_name "#{SimpleCov.command_name} (subprocess: #{pid})"
-        # be quiet, the parent process will be in charge of using the regular formatter and checking coverage totals
-        SimpleCov.print_error_status = false
+      @at_fork = block if block
+      @at_fork ||= lambda { |_pid|
+        # Needs a name that's unique per worker within a run yet identical
+        # across runs. Build it from SimpleCov's stable fork serial rather
+        # than the OS pid: with the pid, every run produced uniquely-named
+        # results that never overwrote the previous run's, so they piled up
+        # in .resultset.json until merge_timeout and the merged report's
+        # file set drifted from run to run. See issue #1171.
+        SimpleCov.command_name "#{SimpleCov.command_name} (subprocess: #{SimpleCov.subprocess_serial})"
+        # be quiet, the parent process will use the regular formatter
+        SimpleCov.print_errors false
         SimpleCov.formatter SimpleCov::Formatter::SimpleFormatter
         SimpleCov.minimum_coverage 0
-        # start
         SimpleCov.start
       }
     end
 
     #
-    # Returns the project name - currently assuming the last dirname in
-    # the SimpleCov.root is this.
+    # Returns the project name — defaults to the last dirname in
+    # SimpleCov.root, capitalized with underscores → spaces.
     #
     def project_name(new_name = nil)
-      return @project_name if defined?(@project_name) && @project_name && new_name.nil?
+      current = defined?(@project_name) ? @project_name : nil
+      return current if current && new_name.nil?
 
       @project_name = new_name if new_name.is_a?(String)
-      @project_name ||= File.basename(root.split("/").last).capitalize.tr("_", " ")
-    end
-
-    #
-    # Defines whether to use result merging so all your test suites (test:units, test:functionals, cucumber, ...)
-    # are joined and combined into a single coverage report
-    #
-    def use_merging(use = nil)
-      @use_merging = use unless use.nil?
-      @use_merging = true unless defined?(@use_merging) && @use_merging == false
-    end
-
-    #
-    # Defines the maximum age (in seconds) of a resultset to still be included in merged results.
-    # i.e. If you run cucumber features, then later rake test, if the stored cucumber resultset is
-    # more seconds ago than specified here, it won't be taken into account when merging (and is also
-    # purged from the resultset cache)
-    #
-    # Of course, this only applies when merging is active (e.g. SimpleCov.use_merging is not false!)
-    #
-    # Default is 600 seconds (10 minutes)
-    #
-    # Configure with SimpleCov.merge_timeout(3600) # 1hr
-    #
-    def merge_timeout(seconds = nil)
-      @merge_timeout = seconds if seconds.is_a?(Integer)
-      @merge_timeout ||= 600
-    end
-
-    #
-    # Defines the minimum overall coverage required for the testsuite to pass.
-    # SimpleCov will return non-zero if the current coverage is below this threshold.
-    #
-    # Default is 0% (disabled)
-    #
-    def minimum_coverage(coverage = nil)
-      return @minimum_coverage ||= {} unless coverage
-
-      coverage = {primary_coverage => coverage} if coverage.is_a?(Numeric)
-
-      raise_on_invalid_coverage(coverage, "minimum_coverage")
-
-      @minimum_coverage = coverage
-    end
-
-    def raise_on_invalid_coverage(coverage, coverage_setting)
-      coverage.each_key { |criterion| raise_if_criterion_disabled(criterion) }
-      coverage.each_value do |percent|
-        minimum_possible_coverage_exceeded(coverage_setting) if percent && percent > 100
-      end
-    end
-
-    #
-    # Defines the maximum coverage drop at once allowed for the testsuite to pass.
-    # SimpleCov will return non-zero if the coverage decreases by more than this threshold.
-    #
-    # Default is 100% (disabled)
-    #
-    def maximum_coverage_drop(coverage_drop = nil)
-      return @maximum_coverage_drop ||= {} unless coverage_drop
-
-      coverage_drop = {primary_coverage => coverage_drop} if coverage_drop.is_a?(Numeric)
-
-      raise_on_invalid_coverage(coverage_drop, "maximum_coverage_drop")
-
-      @maximum_coverage_drop = coverage_drop
-    end
-
-    #
-    # Defines the minimum coverage per file required for the testsuite to pass.
-    # SimpleCov will return non-zero if the current coverage of the least covered file
-    # is below this threshold.
-    #
-    # Default is 0% (disabled)
-    #
-    def minimum_coverage_by_file(coverage = nil)
-      return @minimum_coverage_by_file ||= {} unless coverage
-
-      coverage = {primary_coverage => coverage} if coverage.is_a?(Numeric)
-
-      raise_on_invalid_coverage(coverage, "minimum_coverage_by_file")
-
-      @minimum_coverage_by_file = coverage
-    end
-
-    #
-    # Refuses any coverage drop. That is, coverage is only allowed to increase.
-    # SimpleCov will return non-zero if the coverage decreases.
-    #
-    def refuse_coverage_drop(*criteria)
-      criteria = coverage_criteria if criteria.empty?
-
-      maximum_coverage_drop(criteria.map { |c| [c, 0] }.to_h)
-    end
-
-    #
-    # Add a filter to the processing chain.
-    # There are four ways to define a filter:
-    #
-    # * as a String that will then be matched against all source files' file paths,
-    #     SimpleCov.add_filter 'app/models' # will reject all your models
-    # * as a block which will be passed the source file in question and should either
-    #   return a true or false value, depending on whether the file should be removed
-    #     SimpleCov.add_filter do |src_file|
-    #       File.basename(src_file.filename) == 'environment.rb'
-    #     end # Will exclude environment.rb files from the results
-    # * as an array of strings that are matched against all sorce files' file
-    #   paths and then ignored (basically string filter multiple times)
-    #     SimpleCov.add_filter ['app/models', 'app/helpers'] # ignores both dirs
-    # * as an instance of a subclass of SimpleCov::Filter. See the documentation there
-    #   on how to define your own filter classes
-    #
-    def add_filter(filter_argument = nil, &filter_proc)
-      filters << parse_filter(filter_argument, &filter_proc)
-    end
-
-    #
-    # Define a group for files. Works similar to add_filter, only that the first
-    # argument is the desired group name and files PASSING the filter end up in the group
-    # (while filters exclude when the filter is applicable).
-    #
-    def add_group(group_name, filter_argument = nil, &filter_proc)
-      groups[group_name] = parse_filter(filter_argument, &filter_proc)
-    end
-
-    SUPPORTED_COVERAGE_CRITERIA = %i[line branch].freeze
-    DEFAULT_COVERAGE_CRITERION = :line
-    #
-    # Define which coverage criterion should be evaluated.
-    #
-    # Possible coverage criteria:
-    # * :line - coverage based on lines aka has this line been executed?
-    # * :branch - coverage based on branches aka has this branch (think conditions) been executed?
-    #
-    # If not set the default is `:line`
-    #
-    # @param [Symbol] criterion
-    #
-    def coverage_criterion(criterion = nil)
-      return @coverage_criterion ||= primary_coverage unless criterion
-
-      raise_if_criterion_unsupported(criterion)
-
-      @coverage_criterion = criterion
-    end
-
-    def enable_coverage(criterion)
-      raise_if_criterion_unsupported(criterion)
-
-      coverage_criteria << criterion
-    end
-
-    def primary_coverage(criterion = nil)
-      if criterion.nil?
-        @primary_coverage ||= DEFAULT_COVERAGE_CRITERION
-      else
-        raise_if_criterion_disabled(criterion)
-        @primary_coverage = criterion
-      end
-    end
-
-    def coverage_criteria
-      @coverage_criteria ||= Set[primary_coverage]
-    end
-
-    def coverage_criterion_enabled?(criterion)
-      coverage_criteria.member?(criterion)
-    end
-
-    def clear_coverage_criteria
-      @coverage_criteria = nil
-    end
-
-    def branch_coverage?
-      branch_coverage_supported? && coverage_criterion_enabled?(:branch)
-    end
-
-    def coverage_start_arguments_supported?
-      # safe to cache as within one process this value should never
-      # change
-      return @coverage_start_arguments_supported if defined?(@coverage_start_arguments_supported)
-
-      @coverage_start_arguments_supported = begin
-        require "coverage"
-        !Coverage.method(:start).arity.zero?
-      end
-    end
-
-    def branch_coverage_supported?
-      coverage_start_arguments_supported? && RUBY_ENGINE != "jruby"
-    end
-
-    def coverage_for_eval_supported?
-      require "coverage"
-      defined?(Coverage.supported?) && Coverage.supported?(:eval)
-    end
-
-    def coverage_for_eval_enabled?
-      @coverage_for_eval_enabled ||= false
-    end
-
-    def enable_coverage_for_eval
-      if coverage_for_eval_supported?
-        @coverage_for_eval_enabled = true
-      else
-        warn "Coverage for eval is not available; Use Ruby 3.2.0 or later"
-      end
-    end
-
-  private
-
-    def raise_if_criterion_disabled(criterion)
-      raise_if_criterion_unsupported(criterion)
-      # rubocop:disable Style/IfUnlessModifier
-      unless coverage_criterion_enabled?(criterion)
-        raise "Coverage criterion #{criterion}, is disabled! Please enable it first through enable_coverage #{criterion} (if supported)"
-      end
-      # rubocop:enable Style/IfUnlessModifier
-    end
-
-    def raise_if_criterion_unsupported(criterion)
-      # rubocop:disable Style/IfUnlessModifier
-      unless SUPPORTED_COVERAGE_CRITERIA.member?(criterion)
-        raise "Unsupported coverage criterion #{criterion}, supported values are #{SUPPORTED_COVERAGE_CRITERIA}"
-      end
-      # rubocop:enable Style/IfUnlessModifier
-    end
-
-    def minimum_possible_coverage_exceeded(coverage_option)
-      warn "The coverage you set for #{coverage_option} is greater than 100%"
-    end
-
-    #
-    # The actual filter processor. Not meant for direct use
-    #
-    def parse_filter(filter_argument = nil, &filter_proc)
-      filter = filter_argument || filter_proc
-
-      if filter
-        SimpleCov::Filter.build_filter(filter)
-      else
-        raise ArgumentError, "Please specify either a filter or a block to filter with"
-      end
+      @project_name ||= File.basename(root).capitalize.tr("_", " ")
     end
   end
 end
+
+require_relative "configuration/coverage"
+require_relative "configuration/coverage_criteria"
+require_relative "configuration/eval_coverage"
+require_relative "configuration/filters"
+require_relative "configuration/groups"
+require_relative "configuration/formatting"
+require_relative "configuration/ignored_entries"
+require_relative "configuration/merging"
+require_relative "configuration/thresholds"

data/lib/simplecov/coverage_json.rb

@@ -0,0 +1,24 @@
+# frozen_string_literal: true
+
+require "json"
+
+module SimpleCov
+  # Shared parser for coverage.json consumers. It enforces the encoding and
+  # stable outermost shape while leaving command- or viewer-specific fields to
+  # their respective callers.
+  module CoverageJSON
+    class Error < StandardError; end
+
+    def self.load(path)
+      source = File.binread(path).force_encoding(Encoding::UTF_8)
+      raise Error, "input is not valid UTF-8" unless source.valid_encoding?
+
+      document = JSON.parse(source)
+      return document if document.is_a?(Hash)
+
+      raise Error, "top-level value must be an object"
+    rescue JSON::ParserError => e
+      raise Error, e.message
+    end
+  end
+end

data/lib/simplecov/coverage_statistics.rb

@@ -8,34 +8,40 @@ module SimpleCov
   # * total - how many things to cover there are (total relevant loc/branches)
   # * covered - how many of the coverables are hit
   # * missed - how many of the coverables are missed
+  # * omitted - how many lines cannot be covered (blank lines/comments); only meaningful for line coverage
   # * percent - percentage as covered/missed
-  # * strength - average hits per/coverable (will not exist for one shot lines format)
+  # * strength - average hits per coverable unit (will not exist for one shot lines format)
   class CoverageStatistics
-    attr_reader :total, :covered, :missed, :strength, :percent
+    attr_reader :total, :covered, :missed, :omitted, :strength, :percent
+
+    # Seed for the reduce in `.from`: covered, missed, omitted, strength.
+    ZERO_STATS = [0, 0, 0, 0.0].freeze #: [Integer, Integer, Integer, Float]
 
     def self.from(coverage_statistics)
-      sum_covered, sum_missed, sum_total_strength =
-        coverage_statistics.reduce([0, 0, 0.0]) do |(covered, missed, total_strength), file_coverage_statistics|
+      sum_covered, sum_missed, sum_omitted, sum_total_strength =
+        coverage_statistics.reduce(ZERO_STATS) do |(covered, missed, omitted, total_strength), stats|
           [
-            covered + file_coverage_statistics.covered,
-            missed + file_coverage_statistics.missed,
+            covered + stats.covered,
+            missed + stats.missed,
+            omitted + stats.omitted,
             # gotta remultiply with loc because files have different strength and loc
             # giving them a different "weight" in total
-            total_strength + (file_coverage_statistics.strength * file_coverage_statistics.total)
+            total_strength + (stats.strength * stats.total)
           ]
         end
 
-      new(covered: sum_covered, missed: sum_missed, total_strength: sum_total_strength)
+      new(covered: sum_covered, missed: sum_missed, omitted: sum_omitted, total_strength: sum_total_strength)
     end
 
     # Requires only covered, missed and strength to be initialized.
     #
     # Other values are computed by this class.
-    def initialize(covered:, missed:, total_strength: 0.0)
+    def initialize(covered:, missed:, omitted: 0, total_strength: 0.0, percent: nil)
       @covered  = covered
       @missed   = missed
+      @omitted  = omitted
       @total    = covered + missed
-      @percent  = compute_percent(covered, missed, total)
+      @percent  = percent || compute_percent(covered, missed, total)
       @strength = compute_strength(total_strength, total)
     end