simplecov 0.15.1 → 0.18.0.beta1

data/.travis.yml

@@ -1,29 +0,0 @@
-language: ruby
-
-before_install:
-  - gem update --system
-  - gem install bundler
-
-bundler_args: --without development --jobs=3 --retry=3
-
-cache: bundler
-
-sudo: false
-
-rvm:
-  - 1.8.7
-  - 1.9.3
-  - 2.0.0
-  - 2.1.10
-  - 2.2.7
-  - 2.3.4
-  - 2.4.1
-  - jruby-9.1.13.0
-  - ruby-head
-  - jruby-head
-
-matrix:
-  allow_failures:
-    - rvm: ruby-head
-    - rvm: jruby-head
-  fast_finish: true

data/.yardopts

@@ -1 +0,0 @@
-- **/*.md

data/Gemfile

@@ -1,38 +0,0 @@
-source "https://rubygems.org"
-
-# Uncomment this to use local copy of simplecov-html in development when checked out
-# gem 'simplecov-html', :path => ::File.dirname(__FILE__) + '/../simplecov-html'
-
-# Uncomment this to use development version of html formatter from github
-# gem 'simplecov-html', :github => 'colszowka/simplecov-html'
-
-gem "rake", Gem::Version.new(RUBY_VERSION) < Gem::Version.new("1.9.3") ? "~>10.3" : ">= 10.3"
-
-group :test do
-  gem "rspec", ">= 3.2"
-  # Older versions of some gems required for Ruby 1.8.7 support
-  platforms :ruby_18 do
-    gem "activesupport", "~> 3.2.21"
-    gem "i18n", "~> 0.6.11"
-  end
-  platforms :ruby_18, :ruby_19 do
-    gem "mime-types", "~> 1.25"
-    gem "addressable", "~> 2.3.0"
-  end
-  platforms :ruby_18, :ruby_19, :ruby_20, :ruby_21 do
-    gem "rack", "~> 1.6"
-  end
-  platforms :jruby, :ruby_19, :ruby_20, :ruby_21, :ruby_22, :ruby_23, :ruby_24, :ruby_25 do
-    gem "aruba", "~> 0.14"
-    gem "capybara"
-    gem "nokogiri", RUBY_VERSION < "2.1" ? "~> 1.6.0" : ">= 1.7"
-    gem "cucumber"
-    gem "phantomjs", "~> 2.1"
-    gem "poltergeist"
-    gem "rubocop", "0.49.1" unless RUBY_VERSION.start_with?("1.")
-    gem "test-unit"
-  end
-  gem "json", RUBY_VERSION.start_with?("1.") ? "~> 1.8" : "~> 2.0"
-end
-
-gemspec

data/Rakefile

@@ -1,39 +0,0 @@
-require "rubygems"
-require "bundler/setup"
-Bundler::GemHelper.install_tasks
-
-# See https://github.com/colszowka/simplecov/issues/171
-desc "Set permissions on all files so they are compatible with both user-local and system-wide installs"
-task :fix_permissions do
-  system 'bash -c "find . -type f -exec chmod 644 {} \; && find . -type d -exec chmod 755 {} \;"'
-end
-# Enforce proper permissions on each build
-Rake::Task[:build].prerequisites.unshift :fix_permissions
-
-require "rspec/core/rake_task"
-RSpec::Core::RakeTask.new(:spec) do |spec|
-  spec.pattern = FileList["spec/*_spec.rb"]
-end
-
-begin
-  require "rubocop/rake_task"
-  RuboCop::RakeTask.new
-rescue LoadError
-  task :rubocop do
-    $stderr.puts "Rubocop is disabled"
-  end
-end
-
-# Cucumber integration test suite is for impls that work with simplecov only - a.k.a. 1.9+
-if RUBY_VERSION.start_with? "1.8"
-  task :default => [:spec]
-else
-  require "cucumber/rake/task"
-  Cucumber::Rake::Task.new
-
-  if RUBY_VERSION.start_with? "1.9"
-    task :default => [:spec, :cucumber]
-  else
-    task :default => [:rubocop, :spec, :cucumber]
-  end
-end

data/cucumber.yml

@@ -1,13 +0,0 @@
-<%
-rerun = File.file?('rerun.txt') ? IO.read('rerun.txt') : ""
-rerun_opts = rerun.to_s.strip.empty? ? "--format #{ENV['CUCUMBER_FORMAT'] || 'progress'} features" : "--format #{ENV['CUCUMBER_FORMAT'] || 'pretty'} #{rerun}"
-std_opts = "--format #{ENV['CUCUMBER_FORMAT'] || 'progress'} --strict --tags ~@wip"
-interp_opts = if defined?(RUBY_ENGINE)
-  " --tags ~@exclude-#{RUBY_ENGINE}"
-else
-  ''
-end
-%>
-default: <%= std_opts %><%= interp_opts %> features
-wip: --tags @wip:30 --wip features<%= interp_opts %>
-rerun: <%= rerun_opts %> --format rerun --out rerun.txt --strict --tags ~@wip<%= interp_opts %>

data/features/config_autoload.feature

@@ -1,46 +0,0 @@
-@test_unit @rspec @config
-Feature:
-
-  If you have multiple test suites, it can be a bit cumbersome
-  to keep the configuration across them in sync. SimpleCov
-  is able to find a config file called '.simplecov' that resides
-  in your project's root and will automatically use it when
-  loaded.
-
-  This gives you the ability to configure SimpleCov just once
-  and then use the same configuration on all test suites simply
-  by doing a 'require "simplecov"'
-
-  Scenario:
-    Given a file named ".simplecov" with:
-      """
-      SimpleCov.start do
-        add_filter 'test.rb'
-        add_filter 'spec.rb'
-      end
-      """
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      """
-    Given SimpleCov for RSpec is configured with:
-      """
-      require 'simplecov'
-      """
-
-    When I successfully run `bundle exec rake test`
-    And I open the coverage report generated with `bundle exec rspec spec`
-    Then the report should be based upon:
-      | RSpec      |
-      | Unit Tests |
-
-    And I should see the groups:
-      | name      | coverage | files |
-      | All Files | 90.48%    | 4     |
-
-    And I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         |  80.0 %  |
-      | lib/faked_project/framework_specific.rb |  87.5 %  |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |

data/features/config_command_name.feature

@@ -1,45 +0,0 @@
-@test_unit @rspec @merging @config
-Feature: Custom names for individual test suites
-
-  Each test suite needs a name it can be identified by. SimpleCov tries
-  best to detect Rails' Unit, Functional, Integration tests as well as regular
-  Test/Unit, RSpec and Cucumber, but if that is insufficient, each test suite
-  config can be given a custom command name using SimpleCov.command_name.
-
-  Scenario:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        command_name "I'm in UR Unitz"
-      end
-      """
-    Given SimpleCov for RSpec is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        command_name "Dreck macht Speck"
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-    Then the report should be based upon:
-      | I'm in UR Unitz |
-
-    When I open the coverage report generated with `bundle exec rspec spec`
-    Then the report should be based upon:
-      | Dreck macht Speck |
-      | I'm in UR Unitz   |
-
-  Scenario: RSpec auto detection with spec/features
-    Given SimpleCov for RSpec is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start
-      """
-    And a file named "spec/features/foobar_spec.rb" with:
-      """
-      """
-    When I open the coverage report generated with `bundle exec rspec spec`
-    Then the report should be based upon:
-      | RSpec |

data/features/config_coverage_dir.feature

@@ -1,33 +0,0 @@
-@test_unit @config
-Feature:
-
-  The output directory for test coverage can be customized
-  with the SimpleCov.coverage_dir setting. All coverage reports
-  will be put there instead of the default 'coverage' directory
-  in your project's root.
-
-  Scenario:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        coverage_dir 'test/simplecov'
-      end
-      """
-
-    When I successfully run `bundle exec rake test`
-    Then a coverage report should have been generated in "test/simplecov"
-    And a directory named "coverage" should not exist
-
-  Scenario:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        coverage_dir '/tmp/test/simplecov'
-      end
-      """
-
-    When I successfully run `bundle exec rake test`
-    Then a coverage report should have been generated in "/tmp/test/simplecov"
-    And a directory named "coverage" should not exist

data/features/config_deactivate_merging.feature

@@ -1,42 +0,0 @@
-@test_unit @rspec @merging @config
-Feature:
-
-  If merging of test suite results is not desired, it can be deactivated,
-  thus leading to the coverage report being overwritten with the latest results
-  of a single test suite on each run of any suite.
-
-  It's probably preferrable to generate the individual suite results into separate
-  output directories instead (see SimpleCov.coverage_dir), but it is possible :)
-
-  Scenario:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        use_merging false
-      end
-      """
-    Given SimpleCov for RSpec is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        use_merging false
-      end
-      """
-
-    When I successfully run `bundle exec rake test`
-    Then a file named "coverage/index.html" should exist
-      But a file named "coverage/.resultset.json" should not exist
-
-    Given I open the coverage report
-    Then the report should be based upon:
-      | Unit Tests |
-
-    When I successfully run `bundle exec rspec spec`
-    Then a file named "coverage/index.html" should exist
-      But a file named "coverage/.resultset.json" should not exist
-
-    Given I open the coverage report
-    Then the report should be based upon:
-      | RSpec |
-

data/features/config_formatters.feature

@@ -1,77 +0,0 @@
-@test_unit @config
-Feature:
-
-  The formatter for test coverage can be customized
-  with the SimpleCov.formatter setting. There are two
-  built-in formatters:
-    SimpleCov::Formatter::SimpleFormatter is a simple
-    formatter returning a string of all files with
-    theirs coverages.
-    SimpleCov::Formatter::MultiFormatter is a formatter
-    used to call multiple formatters at once.
-
-  Scenario: With SimpleFormatter
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.formatter = SimpleCov::Formatter::SimpleFormatter
-      SimpleCov.at_exit do
-        puts SimpleCov.result.format!
-      end
-      SimpleCov.start do
-        add_group 'Libs', 'lib/faked_project/'
-      end
-      """
-
-    When I successfully run `bundle exec rake test`
-    Then the output should contain "lib/faked_project/meta_magic.rb (coverage: 100.0%)"
-
-  Scenario: With MultiFormatter
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.formatters = [
-        SimpleCov::Formatter::SimpleFormatter,
-        Class.new do
-          def format(result)
-            raise "Unable to format"
-          end
-        end
-      ]
-
-      SimpleCov.at_exit do
-        puts SimpleCov.result.format!.join
-      end
-      SimpleCov.start do
-        add_group 'Libs', 'lib/faked_project/'
-      end
-      """
-
-    When I successfully run `bundle exec rake test`
-    Then the output should contain "lib/faked_project/meta_magic.rb (coverage: 100.0%)"
-    And the output should match /Formatter [^\s]* failed with RuntimeError: Unable to format/
-
-  Scenario: With multiple formatters
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.formatters = [
-        SimpleCov::Formatter::SimpleFormatter,
-        Class.new do
-          def format(result)
-            raise "Unable to format"
-          end
-        end
-      ]
-
-      SimpleCov.at_exit do
-        puts SimpleCov.result.format!.join
-      end
-      SimpleCov.start do
-        add_group 'Libs', 'lib/faked_project/'
-      end
-      """
-
-    When I successfully run `bundle exec rake test`
-    Then the output should contain "lib/faked_project/meta_magic.rb (coverage: 100.0%)"
-    And the output should match /Formatter [^\s]* failed with RuntimeError: Unable to format/

data/features/config_merge_timeout.feature

@@ -1,39 +0,0 @@
-@test_unit @rspec @merging @config
-Feature:
-
-  The maximum time between resultset merges can be customized
-  using SimpleCov.merge_timeout SECONDS. This can be helpful for
-  long-running test-suites that fail to merge because of the time
-  between individual suite finishes is more then the default timeout
-  of 10 minutes.
-
-  Here, for the sake of testing the opposite case is shown, choosing
-  a merge timeout so short that the first test suite's results actually
-  are out of date when the second suite finishes and thus does not end up
-  in the report.
-
-  Scenario:
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        merge_timeout 5
-      end
-      """
-    Given SimpleCov for RSpec is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start do
-        merge_timeout 5
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-    Then the report should be based upon:
-      | Unit Tests |
-
-    When I wait for 5 seconds
-    And I open the coverage report generated with `bundle exec rspec spec`
-    Then the report should be based upon:
-      | RSpec |
-

data/features/config_nocov_token.feature

@@ -1,79 +0,0 @@
-@test_unit @nocov
-Feature:
-
-  Code wrapped in # :nocov: will be ignored by coverage reports.
-  The name of the token can be configured with SimpleCov.nocov_token or SimpleCov.skip_token
-
-  Scenario: Custom nocov token using nocov_token
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start 'test_frameworks' do
-        nocov_token 'skippit'
-      end
-      """
-
-    Given a file named "lib/faked_project/nocov.rb" with:
-      """
-      class SourceCodeWithNocov
-        # :skippit:
-        def some_weird_code
-          never_reached
-        rescue => err
-          but no one cares about invalid ruby here
-        end
-        # :skippit:
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-
-    Then I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         | 80.0 %   |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |
-      | lib/faked_project/nocov.rb              | 100.0 %  |
-
-    And there should be 7 skipped lines in the source files
-
-    And the report should be based upon:
-      | Unit Tests |
-
-  Scenario: Custom nocov token using skip_token
-    Given SimpleCov for Test/Unit is configured with:
-      """
-      require 'simplecov'
-      SimpleCov.start 'test_frameworks' do
-        skip_token 'skippit'
-      end
-      """
-
-    Given a file named "lib/faked_project/nocov.rb" with:
-      """
-      class SourceCodeWithNocov
-        # :skippit:
-        def some_weird_code
-          never_reached
-        rescue => err
-          but no one cares about invalid ruby here
-        end
-        # :skippit:
-      end
-      """
-
-    When I open the coverage report generated with `bundle exec rake test`
-
-    Then I should see the source files:
-      | name                                    | coverage |
-      | lib/faked_project.rb                    | 100.0 %  |
-      | lib/faked_project/some_class.rb         | 80.0 %   |
-      | lib/faked_project/framework_specific.rb | 75.0 %   |
-      | lib/faked_project/meta_magic.rb         | 100.0 %  |
-      | lib/faked_project/nocov.rb              | 100.0 %  |
-
-    And there should be 7 skipped lines in the source files
-
-    And the report should be based upon:
-      | Unit Tests |